APPLICATIONS & PRODUCTS - PUMP GUIDE

STERLING FLUID SYSTEMS GROUP www.sterlingfluidsystems.com

COMMITTED TO ENGINEERING EXCELLENCE

FOCUSED ON - SERVING INDUSTRY
Sterling Fluid Systems aims to provide unrivalled customer service by being industry focused.
Primarily the industry segments are divided into the three divisions, which are Chemical, Industrial, Energy and Environmental. This is all underpinned with a strong emphasis on Service Support.

QUALITY ASSURANCE
Total Quality Assurance is offered by all Sterling Fluid Systems companies within the standards approved to ISO 9000. Formal directives are also issued in-line with the European Community CE requirements. All the Groups manufacturing facilities around the world comply with the required quality standards of the region as well as the necessary health and safety requirements.

DESIGN
In this increasingly competitive world, we have the ability to provide new innovative designs which are both cost effective and provide high levels of reliability. Utilising the most sophisticated Computer Aided Design packages ensures that optimum mechanical and hydraulic performances are achieved.

PROVEN PRODUCTS - SERVING INDUSTRY

Extensive application and material knowledge combined with the respected and established product ranges within Sterling Fluid Systems ensures confidence throughout a wide range of markets and manufacturing processes.

FOUNDRIES
In-house foundries specialise in the supply of precision components and castings in high alloy steels and nickel based alloys. These modern, well equipped foundries respond rapidly to all

RAPID RESPONSE - PRODUCT SELECTION

Rapid Access to Pump Information and Design is the very latest electronic on-line product selection package. Selections and supporting data across the entire Sterling Fluid Systems pump product range can be printed on the spot and made available to customers to ensure they have the most up-to-the minute technical data.

customer demands as well as serving the Sterling Fluid Systems companies.

MANUFACTURING
Manufacturing and assembly facilities worldwide operate as individual units, all forming part of an integrated global manufacturing operation. These centres of engineering excellence design, manufacture and develop products, systems and technologies utilising the most modern DNC processes.

LOCAL SERVICE NETWORK - SUPPORTED GLOBALLY

Sterling Fluid Systems recognises the need to provide the highest level of care and support for all its products and systems operating in the field. Sterling Service Centres are established all around the world ensuring the very best support is always within easy reach.

TESTING
Extensive testing facilities ensure performance levels of the various products meet or exceed the specifications as laid down by customers and inspection authorities.

WORKING IN PARTNERSHIP
Our understanding of your application and process requirements enables us to provide the engineered solution that is right for your process.

PRODUCT SUMMARY

CHEMICAL APPLICATIONS
LIQUID TECHNOLOGY MIXERS VOLUTE CASING SIDE CHANNEL MULTI-STAGE PITOT TUBE, HYGIENIC, GEAR VACUUM TECHNOLOGY VACUUM PUMPS ENGINEERED SYSTEMS

MARKET FOCUSED
BASIC CHEMICALS Petrochemical processing Heat transfer industry Polymer processing Fertiliser processing Basic chemical processing

Liquid ring compressor (single stage)

Liquid ring compressor (multi stage)

End Suction - in-line, close coupled

Vacuum and compressor systems

Liquid ring vacuum - single stage

Liquid ring vacuum - two stage

Horizontal with NPSH inducer

End Suction - sewage, slurry

End Suction - close coupled

End Suction - sump pumps

End Suction - self priming

Horizontal - self priming

Dry running vacuum

Membrane systems

Liquid systems

Sludge mixers

Roots blower

Medium flow

End Suction

Gas ejector

Horizontal

Horizontal

Deep well

Pitot tube

High flow

Hygienic

Vertical

Vertical

Gear

FINE / DOWNSTREAM CHEMICALS Pesticide processing Pigments & paints processing Resin & adhesive processing Detergents processing Fibre processing Active pharmaceuticals PHARMACEUTICALS Active pharmaceuticals End products

For detailed information please see page:Absorption Adsorption Central vacuum Centrifugal separation Cooling water Crystallisation Distillation (reaction vessel) Distillation (short path) Distillation (rectification) Drum or barrel offloading Effluent treatment Evaporation (falling film) Evaporation (thin film) Extraction Filling Freeze drying Pressure filtration Product transfer Reaction gas-liquid Reaction liquid-liquid Reaction solid-liquid Solvent recovery Steam and power generation Tank farms / storage Thermal control unit (hot oil, hot water) Thermal drying Vacuum drying Vacuum filtration Water purification / demineralised water

10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 17 15 15 15 16 16 16 17 18 18 18

INDUSTRIAL APPLICATIONS
LIQUID TECHNOLOGY MIXERS VOLUTE CASING SIDE CHANNEL MULTI-STAGE PITOT TUBE, HYGIENIC, GEAR VACUUM TECHNOLOGY VACUUM PUMPS ENGINEERED SYSTEMS

MARKET FOCUSED
FOOD Drink & beverage industry Edible oil & fats industry Food industry MACHINERY MANUFACTURING Health care industry Industrial steam industry LPG / LNG production LPG / LNG distribution Rubber & plastic processing GENERAL INDUSTRIAL Agriculture Building industry Marine industry Metal processing Mining / mineral extraction Foundries Textile processing

Liquid ring compressor (single stage)

Liquid ring compressor (multi stage)

End Suction - in-line, close coupled

Vacuum and compressor systems

Liquid ring vacuum - single stage

Liquid ring vacuum - two stage

Horizontal with NPSH inducer

End Suction - sewage, slurry

End Suction - close coupled

End Suction - sump pumps

End Suction - self priming

Horizontal - self priming

Dry running vacuum

Membrane systems

For detailed information please see page:Central vacuum Cleaning Component positioning Cooling water Degassing Demineralised water Distillation Extraction Extrusion / Vacuum forming Filling Freeze drying Gas compression Heat transfer (hot oil) Heat transfer (hot water) Irrigation LPG Mixing Packaging / Bottling Product transfer Refrigerant handling Sterilising Tank farms / Storage Thin film evaporation Vacuum drying Washing

10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 17 15 15 15 16 16 16 17 18 18 18

Liquid systems

Sludge mixers

Roots blower

Medium flow

End Suction

Gas ejector

Horizontal

Horizontal

Deep well

Pitot tube

High flow

Hygienic

Vertical

Vertical

Gear

ENERGY & ENVIRONMENTAL APPLICATIONS

LIQUID TECHNOLOGY MIXERS VOLUTE CASING SIDE CHANNEL MULTI-STAGE PITOT TUBE, HYGIENIC, GEAR VACUUM TECHNOLOGY VACUUM PUMPS ENGINEERED SYSTEMS

MARKET FOCUSED
ENERGY Steel mill industry Oil & gas extraction Oil refining (API) Power generation MUNICIPAL WATER Water supply Water treatment

Liquid ring compressor (single stage)

Liquid ring compressor (multi stage)

End Suction - in-line, close coupled

Vacuum and compressor systems

Liquid ring vacuum - single stage

Liquid ring vacuum - two stage

Horizontal with NPSH inducer

End Suction - sewage, slurry

End Suction - close coupled

End Suction - sump pumps

End Suction - self priming

Horizontal - self priming

Dry running vacuum

Membrane systems

Liquid systems

Sludge mixers

Roots blower

Medium flow

End Suction

For detailed information please see page:Boiler feed Cleaning Cooling water Condensate Descaling Drainage Heat transfer (hot water) Irrigation Mixing Pressure generation Product transfer Reverse osmosis Tank farms / storage Vacuum drying Washing

10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 17 15 15 15 16 16 16 17 18 18 18

Gas ejector

Horizontal

Horizontal

Deep well

Pitot tube

High flow

Hygienic

Vertical

Vertical

Gear

HEAVY MACHINERY Mining / mineral extraction Waste incineration Pulp & paper industry

VOLUTE CASING
END-SUCTION END-SUCTION CLOSE COUPLED END-SUCTION IN-LINE, CLOSE COUPLED END-SUCTION SEWAGE, SLURRY

VOLUTE CASING
END-SUCTION SELF PRIMING END-SUCTION SUMP PUMPS

Maximum performance Flow rate: 4800 m3/h 21,000 USgpm Head: 240 m 790 ft Temperature: 400 C 750 F Pressure: 40 bar 580 psi Speed: 3600 rpm

Maximum performance Flow rate: 650 m3/h 2860 USgpm Head: 150 m 490 ft Temperature: 400 C 750 F Pressure: 25 bar 363 psi Speed: 3600 rpm

Maximum performance Flow rate: 200 m3/h 880 Head: 100 m 328 Temperature: 250 C 482 Pressure: 25 bar 363 Speed: 3600 rpm

USgpm ft F psi

Maximum performance Flow rate: 1350 m3/h 5940 USgpm Head: 90 m 295 ft Temperature: 80 C 176 F Pressure: 16 bar 232 psi Speed: 1800 rpm

Maximum performance Flow rate: 340 m3/h 1496 USgpm Head: 135 m 443 ft Temperature: 250 C 482 F Pressure: 63 bar 913 psi Speed: 3600 rpm

Maximum performance Flow rate: Head: Temperature: Pressure: Speed: 2800 m3/h 12,320 USgpm 140 m 460 ft 160 C 320 F 16 bar 232 psi 3600 rpm

Features & design options G Standards to: DIN 24255, ISO 5199, ISO 2858, EN 22858, EN 733, ANSI/ASME B73.1M G Closed or semi-open impeller G Mixed flow impeller G Low flow impeller G Single or double mechanical seal G Gas seal G Magnetic coupling G Canned motor G Heating jackets G Monitoring systems G Triple volute casings G High temperature designs G Modular design G Standard and special materials G Centre line design for RBS, MBK, MRS

Features & design options G Standards to: ISO 5199, ISO 2858, EN 22858, EN 733 G Closed or semi-open impeller G Mixed flow impeller G Single or double mechanical seal G Magnetic coupling G Canned motor G Heating jackets G Monitoring systems G High temperature designs G Modular design G Non-metallic material G PTFE lined G Standard and special materials

Features & design options G Standards to EN 733 G Close coupled design G Single mechanical seal G Magnetic coupling G Monitoring systems G High temperature designs G Modular design G Standard and special materials

Features & design options G Horizontal G Vertical direct-mounted G Vertical open shaft G Spiral vane impeller & free flow impeller G Soft packing G Mechanical seal

Features & design options G Standards to EN 733 G Soft packing G Single or double mechanical seal G Magnetic coupling G Non-metallic materials G Suction lifts 8.0m (26 ft) G Vertically mounted G Special materials

Features & design options G Vertical design for tank, vessel or sump G ISO or ANSI flanges G Round plate (API 610) optional G Flexible coupling G Closed and semi open impeller G Free flow impeller G Intermediate column bearing G Special materials G Mechanical seal G Electric motor

Product ranges
SIHI LaBOUR

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI LaBOUR

Product ranges
SIHI HALBERG

SuperNova ZLN, ZEN, ZDN, ZHN, ZTN ISOchem CBSD, CBMD ISOlined CLS, CLM

PC, EO, LV, DZTM, LVA, SZ

HALBERG

CBTA, CBH, CBK, SPL, RBS, MBK, MRS

SuperNova ZLK ZTK ISOchem CBBD CBED CBCD

ISOlined CLM CLE GLM CLS GLB GLK ALMA

SuperNova ZLI ZTI

DBS DES SPL SZ

ULN UEA UEH

UHLM UPLM BGMX

ZLNV

CBSV DBSV SPLV NOP

10

SIDE CHANNEL
HORIZONTAL HORIZONTAL WITH NPSH INDUCER VERTICAL HORIZONTAL

MULTI-STAGE
HORIZONTAL SELF PRIMING VERTICAL

Maximum performance Flow rate: 35 m3/h Head: 325 m Temperature: 180 C Pressure: Speed: 100 bar

154 USgpm 1066 ft 356 F 1450 psi

3000 rpm

Maximum performance Flow rate: 35 m3/h 154 USgpm Head: 354 m 1160 ft Temperature: 180 C 356 F Pressure: 40 bar 580 psi Speed: 3000 rpm

Maximum performance Flow rate: 12 m3/h 53 USgpm Head: 80 m 262 ft Temperature: 120 C 248 F Pressure: 40 bar 580 psi Speed: 3000 rpm

Maximum performance Flow rate: 650 m3/h 2860 USgpm Head: 1600 m 5250 ft Temperature: 180 C 356 F Pressure: 160 bar 2320 psi Speed: 3600 rpm

Maximum performance Flow rate: 650 m3/h 2860 USgpm Head: 250 m 820 ft Temperature: 140 C 284 F Pressure: 40 bar 580 psi Speed: 3600 rpm

Maximum performance Flow rate: 72,000 m3/h 316,800 USgpm Head: 2100 m 6900 ft Temperature: 232 C 450 F Pressure: 40 bar 580 psi Speed: 3600 rpm

Features & design options G In-line design G Self priming G Gas handling G Standard to EN 734 G Soft packing G Single mechanical seal G Magnetic coupling G Barrel design G Close coupled version

Features & design options G Low NPSH inducer G Self priming G Gas handling G Standard to EN 734 G Soft packing G Single mechanical seal G Magnetic coupling G Barrel design G Close coupled version

Features & design options G Self priming G Gas handling G Soft packing G Single mechanical seal G Magnetic coupling G Close coupled version G Vertical electric motor

Features & design options G Horizontal multi-stage pump with closed impeller G Renewable diffusers, case wear rings and shaft sleeve G Hydraulic balance of axial thrust G Standard and special materials

Features & design options G Horizontal multi-stage pump with NPSH inducer stage G Axial thrust is compensated by a single balance disc and counter disc G Soft packing G Mechanical seal G Magnetic coupling G Standard materials

Features & design options G Vertical multi-stage pump with closed impeller G Wet installations G Axial thrust is absorbed by an adequately sized, deep groove ball bearing or by balancing of the impellers G Motor stool for mounting standard flanged motors G Renewable diffusers, case wear rings and shaft sleeves G Standard materials

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI HALBERG

Product ranges
SIHI

Product ranges
SIHI

AOL AKL AOP ALM AOH AKH AEH ADH ASH

CEH CDH

DRV AKV

Multi MSL MSN MSH MSM

ZEA HES HO HDV HM

TKH TLH UEA UEH

MSV MIR CBS-VR DBS-VR

11

12

MULTI-STAGE
MEDIUM FLOW DEEP WELL HIGH FLOW

PITOT TUBE, HYGIENIC, GEAR PUMPS

PITOT TUBE PUMPS HYGIENIC PUMPS VOLUMETRIC GEAR PUMPS

Maximum performance Flow rate: 100 m3/h 440 USgpm Head: 171 m 562 ft Temperature: 60 C 140 F Pressure: PN25 Speed: 3000 rpm

Maximum performance Flow rate: 2270 m3/h 10,000 USgpm Head: 760 m 2500 ft Temperature: 82 C 180 F Pressure: To fit the application Speed: 3600 rpm

Maximum performance Flow rate: 100,000 m3/h 440,000 USgpm Head: 100 m 328 ft Temperature: 80 C 176 F Pressure: To fit the application Speed: 1500 rpm

Maximum performance Flow rate: 90 m3/h 396 USgpm Head: 1900 m 6230 ft Temperature: 200 C 392 F Pressure: 160 bar 2320 psi Speed: 6800 rpm

Maximum performance Flow rate: max. 200 m3/h Head: max. 85 m Temperature: 130 C or 90 C Pressure: PN16 Speed: max. 3000 rpm or 1500 rpm

Maximum performance Capacity: Differential pressure: Speed: Suction lift: - priming - pumping Temperature: Velocity: max. 70 m3/h max. 16 bar max. 1750 rpm max. max. max. max. 0.5 bar vacuum 0.8 bar vacuum 250 C 75,000 mm2/s

Features & design options G Vertical single stage and multi-stage G Closed impeller G Axial impeller G Vertical electric motor G Variable speed drive G Magnetic coupling G Standard and special materials

Features & design options G Vertical line-shaft G Deep well G Wet pit G Closed impeller G Radial impeller G Mixed flow impeller G Vertical electric motor G Diesel engine with right angle gearbox G Soft packing G Mechanical seal G Standard and special materials

Features & design options G Vertical single stage and multi-stage G Wet pit G Closed or semi-open radial or mixed flow impeller G Axial impeller G Vertical electric motor G Variable speed drive G Variable pitch G Soft packing G Mechanical seal G Standard and special materials

Features & design options G Single stage pitot tube pump G Low flow, high pressure G Pulsation-free flow with stable NPSHR curve G Exchangable stationary wing-shaped pitot tube, single or double, placed inside the rotor G Conforms to API 610 (oil lubricated version)

Features & design options G Hygienic volute casing G Stainless steel casing G Quick release clamp ring G Sanitary grade O-ring seal G All processes wetted - parts to AISI316L G Self priming side channel option G Food grade standards / 3A1 G Surface roughness Ra 3.2 m

Features & design options G Horizontal gear pumps G Internal idler gear in mesh with main rotor G Provides favourable flow conditions G Superior self priming capability G Pumps high viscous liquids G Modular design G Can be provided with a relief valve to prevent build-up of excess pressure

Product ranges
SIHI

Product ranges
HALBERG

Product ranges
HALBERG

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI

CEB ZEB

MIR

RT RA RK

Combitube CWHC 1 (Grease) CWHC 2 (Oil)

NHK SHK

GearPlus RRN RLN

13

14

LIQUID RING VACUUM

SINGLE STAGE TWO STAGE ROOTS BLOWER (LOBULAR BOOSTER)

LIQUID RING VACUUM COMPRESSORS

GAS EJECTORS SINGLE STAGE MULTI STAGE

Maximum performance Suction capacity: 15,000 m3/h 8800 acfm Operating pressure: 33 mbar 25 torr

Maximum performance Suction capacity: 10,000 m3/h 5900 acfm Operating pressure: 33 mbar 25 torr

Maximum performance Suction capacity: 4000 m3/h 17,600 USgpm Operating pressure: 1 mbar abs 1.45-2 psia

Maximum performance Suction capacity: 7500 m3/h 4400 acfm Operating pressure: 4 mbar 3 torr

Maximum performance Suction capacity: 10,000 m3/h 5900 scfm Operating pressure: 1.5 bar 22 psig

Maximum performance Suction capacity: 1450 m3/h 850 scfm Operating pressure: 15 bar 218 psig

Features & design options G Evacuation of gases and vapours G Ability to handle entrained liquid G Mechanical seal (single or double) G Soft packing G Magnetic coupling G Protection against cavitation G Central drain G ANSI or ISO specifications G Standard and special materials G Close coupled versions G Special applications

Features & design options G Evacuation of gases and vapours G Ability to handle entrained liquid G Soft packing G Mechanical seal (single or double) G Magnetic coupling G Protection against cavitation G Material options G Central drain G ANSI or ISO specifications G Standard and special materials G Special applications

Features & design options G Ability to handle large gas and vapour flows G Low suction pressures in the medium high and low course vacuum G Ability to operate as the final stage with liquid vacuum pump sets G Leakage rate below 10-3 mbar Is -1

Features & design options G Operates efficiently with liquid ring vacuum pumps G Utilises pumped gases G Standard and special materials

Features & design options G Compression of gases and vapours G Soft packing G Mechanical seal (single or double) G Magnetic coupling G ANSI or ISO specifications G Standard and special materials

Features & design options G Compression of gases and vapours G Soft packing G Mechanical seal (single or double) G ANSI or ISO specifications G Standard and special materials

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI

LPH-X LPH LEM LEL LEH LOH SL

Extruvac LEME

LPH-X LPH LOH LEH

Sterivac LEMS

WNM

GPV GOV GEV

LOH LPH-X LPH KPH

KPH KSH KLH

15

16

DRY RUNNING VACUUM

DRY-RUNNING VACUUM (H SERIES) DRY-RUNNING VACUUM (M SERIES)

MIXERS
SLUDGE MIXERS

ENGINEERED SYSTEMS
VACUUM AND COMPRESSOR SYSTEMS MEMBRANE SYSTEMS LIQUID SYSTEMS

Maximum performance Suction capacity: 1000 m3/h 594 acfm Operating pressure: 0.001 mbar abs 1.45-5 psia End pressure <0.01 mbar Power consumption at end pressure 19.0 kW Sound level - DIN 70 dB(A) Features & design options G Totally dry - No consumption or disposal of operating and lubricating fluids G Up to 20,000 hours operation without pump maintenance G Easily and quickly maintained G Fail-safe operation under upset conditions G No mechanical shaft seals required G Variable speed driver G Real time operating control and monitoring G Self diagnosing control G T3 or T4 temperature limit G Suitable for areas with explosion hazards G Customised design G Electronic monitoring

Maximum performance Suction volume: 180 m3/h 107 acfm Operating pressure: 0.1 mbar abs 1.45-3 psia End pressure <0.5 mbar Power comsumption at end pressure 5.0 kW Sound level - DIN 63 dB(A) Features & design options G Totally dry - No consumption or disposal of operating and lubricating fluids G Up to 20,000 hours operation without pump maintenance G Easily and quickly maintained G Fail-safe operation under upset conditions G No mechanical shaft seals required G Variable speed driver G Real time operating control and monitoring G Self diagnosing control G Suitable for areas with explosion hazards G T3 temperature limit G Compact, integrated construction

Maximum performance Flow rate: 7200 m3/h 31,680 USgpm Digester tank vol.: 20,000 m3 5.3 Mio. US gal. Temperature: Speed: Rotation: 60 C 140 F 1500 rpm CW & CCW

Maximum performance Suction capacity: 15,000 m3/h 8800 acfm Suction pressure: 0.1 mbar 1.45-3 psia 0.075 torr Discharge pressure: 9 bar 96 psig

Maximum performance Suction capacity: on request Recovery rate: >99% Outlet concentrations: Acc. European clean air regulations

Maximum performance Capacity: on request Discharge pressure: on request

Features & design options G Vertical G Screw type impeller G Non-clogging G Gas tight lip seal system G Automatic grease pump G Combined thrust and guide bearing G Splash disk G Ductile cast iron

Features & design options G Standard packages G Hybrid packages G Liquid ring vacuum packages G Liquid ring compressor packages G Multi-stage packages including: - Liquid ring vacuum pumps - Gas ejectors - Steam ejectors - Mechanical boosters - SIHI dry G Single source supply G ANSI, ISO, DIN and nuclear standards G Increased performance range available through hybrid engineered systems G Completely assembled with - Vessel, filter and heat exchanger - Valves, instrumentation and piping - Junction box, electric panel, PLC Suction

Features & design options G Purification and recovery of VOC from exhaust gas G Gas drying G Monomer recovery

Features & design options Pre-assembled packages including: G Collectors G Condensation vessels suction side G Pressurised and/or heated vessels G (Ex) instrumentation for control of temperature, pressure, level, G Filter systems G Dosing systems G pH regulation system G Pneumatic systems G Heat exchangers G Junction boxes G Control panel G Common base plate for easy connection to the process and utilities G Engineering standards comply with local requirements

Product ranges
SIHI

Product ranges
SIHI

Product ranges
HALBERG

Product ranges
SIHI

Product ranges
SIHI

Product ranges
SIHI

Dry H250 H400 H750 H1000

Dry M160

MFS

Modular PLN PK PLG PN PL

PLM PKM PKLM PM

UNIP

17

18

www.sterlingfluidsystems.com
Europe
www.sterlingfluidsystems.com/europe Sterling Fluid Systems (Austria) Wien Telephone: +43 (0)1 680 050 Fax: +43 (0)1 680 0521 E-Mail: [email protected] Sterling Fluid Systems (France) Trappes Telephone: +33 (0)1 34 82 39 00 Fax: +33 (0)1 34 82 39 61 E-Mail: [email protected] Sterling Fluid Systems (Greece) Athens Telephone: +30 (0) 210 957 07 83 Fax: +30 (0) 210 956 81 21 E-Mail: [email protected] Sterling Fluid Systems (Netherlands) Beverwijk Telephone: +31 (0)251 263 232 Fax: +31 (0)251 226 309 E-Mail: [email protected] Sterling Fluid Systems (Schweiz) Schaffhausen Telephone: +41 (0)52 6440606 Fax: +41 (0)52 6440616 E-Mail: [email protected] Sterling Fluid Systems (Belgium) Groot-Bijgaarden Telephone: +32 (0)2 481 7711 Fax: +32 (0)2 481 7737 E-Mail: [email protected] Sterling SIHI (Germany) Itzehoe Telephone: +49 (0)4821 77101 Fax: +49 (0)4821 771274 E-Mail: [email protected] Sterling Fluid Systems (Hungary) Veszprm Telephone: +36 (0)88 40 66 33 Fax: +36 (0)88 40 66 35 E-Mail: [email protected] Sterling Fluid Systems (Polska) Warszawa Telephone: +48 (0) 22 335 24 80/81 Fax: +48 (0) 22 335 24 82 E-Mail: [email protected] Sterling Fluid Systems (Spain) Madrid Telephone: +34 91 709 1310 Fax: +34 91 715 9700 E-Mail: [email protected] Sterling Fluid Systems (Czech Republic) Olomouc Telephone: +420 68 551 6651 Fax: +420 68 551 66 53 E-Mail: [email protected] Sterling SAT (Germany) Dgeling/Holstein Telelphone: +49 (0) 4821 9000-0 Fax: +49 (0) 4821 9000-501 E-Mail: [email protected] Sterling Fluid Systems (Italy) Monza, Milan Telephone.:+39 (0) 39 28 241 Fax: +39 (0) 39 2824 220 E-Mail: [email protected] Sterling Fluid Systems (Romania) Bucuresti Telephone: +40 (0) 21 610 7188 Fax: +40 (0) 21 210 8287 E-Mail: [email protected] Sterling Fluid Systems (UK) Altrincham/Cheshire Telephone: +44 (0)161 9286371 Fax: +44 (0)161 9252129 E-Mail: [email protected]

Americas
www.sterlingfluidsystems.com/americas SIHI Pumps (USA) Grand Island Telephone: (1) 716 773 6450 Fax: (1) 716 773 2330 E-Mail:[email protected] Sterling PCU (USA) Dayton Telephone: (1) 937 299 5594 Fax: (1) 937 299 3843 E-Mail: [email protected] SIHI Pumps (Canada) Guelph Telephone: (1) 519 824 4600 Fax: (1) 519 824 7250 E-Mail: [email protected]

Asia
www.sterlingfluidsystems.com/asia Sterling Fluid Systems (Singapore) Singapore Telephone: (65) 6562 8300 Fax: (65) 6562 8308 E-Mail: [email protected] Sterling Fluid Systems (Malaysia) Selangor Darul Ehsan, Telephone: (60) 3 5885 0331 Fax: (60) 3 5885 0337 E-Mail:[email protected] SIHI (Australia) Bayswater Telephone: (61) 3 9720 1500 Fax: (61) 3 9720 4076 E-Mail: [email protected] Sterling Fluid Systems (Thailand) Bangkok Telephone: (66-2) 319 2567 Fax: (66-2) 319 2573/4 E-Mail:[email protected] Sterling Fluid Systems (China) Shanghai Telephone: (8621) 6218 8068 Fax: (8621) 6217 8086 E-Mail: [email protected] Sterling Fluid Systems (Taiwan) Taipei Telephone: (886) 2 8631 2138 Fax: (886) 2 8631 2184 E-Mail:[email protected]

28