METAL AND NON METALS

# ELEMENT

Definition

An element is a pure substance which is made up of same kind of atom which differ
from their physical and chemical properties.

 115 elements are known under which 92 are naturally occurring.

Classification of elements

 Elements can be classified into 3 types

• Metals
• Non metals
• Metalloids
CLASSIFICATION OF ELEMENTS

METALS METALLOIDS NON METALS

silicon,
germanium,
arsenic
COMBINED
FREE STATE STATE COMBINED
FREE STATE
STATE
GOLD NA, K, Ca
in the form of catbonate
, oxides, sulphide Oxygen, Nitrogen, sulphur, Sulphur and carbon in
SILVER
Carbon in the form of the form of oxides,
graphite, diamond. carbonates , sulphides
PLATINUM

 Some abundant elements

• Aluminium(most)
• Iron
•

 Most abundant non metal

• Oxygen

 Less reactive metal

• Gold
• Silver
• Platinum

 Most reactive metals

• Sodium
 • Potassium
• Calcium

 Non metal existing in free(native) and combined state

• Sulphur
• Carbon

DIFFERENCE BETWEEN MINERAL AND ORE

Mineral ore
A mineral is a naturally occurring Ore is a mineral from which one or
inorganic substance found deep inside more metals can be extracted
the earth surface economically and profitably.

Examples of ore

 Ore of Iron – Hematite ( Fe2O3) ; Magnetite( Fe3O4)

 Ore of aluminium – bauxite( Al2O3.H2O) ; Cryolite (Na3AlF6)

METALLURGY

DEFINATION

Sequence of processes to extract a metal in its pure form from its ore is called
metallurgy.

STEPS OF METALLURGY

STEP 1 STEP 2
CONCENTRATION REDUCTION
OF ORE

METALLURGY

STEP 3
REFINING OF METAL

• CONCENTRATION OF ORE
It is the process of removal of impurities from its ore.
• REDUCTION
 It is the process of the reduction of the metal ire to get the metal in its free
state.
• REFINING OF METAL
The metal obtained in the second step is impure. Refining is the process of
purification of metal.

Physical properties

Property Metal Non metal

Physical state Are generally solids except Occur in

mercury(liquid state) • Solids- carbon,
sulphur, phosphorous.
• Liquid- bromine
• Gas- oxygen, nitrogen
Lusture Have shiny appearance Dull appearance
Exception
• Graphite
• Iodine
Melting & Boiling point High mp.pt and bp.pt Low mp.pt & bp.pt
Exception
Cesium has mp.pt of Exception
28.70c Carbon has hiogh mp.pt of
37230c
Hardness Very hard & can withstand Soft
high pressure.
Exception Exception
Na & K are soft and can be Diamond, hardest known
easily cut by knife. substance.
Density High Low

Ductility Metals are ductile Non ductile.

Ductility is defined as the

property of metals to be
drawn into thin wires.

Most ductile metals

Gold & silver.

Malleability Metals are malleable Non ductile

Malleability is defined as the

property of metals to be
drawn into thin sheets on
hammering.
Most malleable
Gold and silver

Conductivity Property of metals that Bad conductor of heat

• Thermal allows conduction of heat Exception
conductivity from one region to another.
Graphite
 Property of metals that
• Electrical allows conduction of Bad conductors of current
conductivity electricity from one region to
another. Exception
Graphite(form of carbon)
Exception

Lead and mercury are bad

conductors

Sonorosity Property of metals to NON SONOROUS

produce a ringing sound
when struck.

METALLOIDS
There are some metals which show some properties of a metals and non metals.
Such elements are called metalloids.

Examples: ARSENIC, GERMANIUM, SILICON

NOBLE METALS

Definition

Those metals that have least reactivity and do not react with air, water, acids and
bases are referred to as noble metals.
Two noble metals are: GOLD, PLATINUM

Q why noble metals do not get tarnished?

Q silver jewellery when kept in open gets tarnished after some time. Why?

 Pure gold is soft and its purity is measured in units called CARATS. If gold
is 22 carats pure, it means that 22 parts of gold are present in 24 parts of
mixture of gold with copper and silver.
 Copper and silver are added to make pure gold hard.

Q why gold is alloyed with silver and copper?

 USES OF METALS.
 ALUMINIUM

USE PROPERTY
In electrical cables • Good conductor
• Ductile (can be drawn into thin
wires.)
In making cooking utensils • Good conductor of electricity.
Making aluminum foils • Malleable(can be beaten into
thin sheets on hammering)
• Good conductor of heat
To make alloys like duralumin(for • Light and strong
making aircraft)

 COPPER

USE PROPERTY
In electrical cables • Good conductor
• Ductile (can be drawn into thin
wires.)
In making cooking utensils • Good conductor of electricity.

# GENERAL USES OF METALS

 For making electrical fittings, net doors, wires as metals are ductile.

 Gold, silver, platinum are used fir making jewellery because of its
lusture, ductility and malleability.

 Are used for making bells, because of the property of sonorosity,

which gives ringing sound when struck.

 Iron is used for making cooking utensils , water boilers , chains because
of its strength, malleability, ductility and versatility.

CORROSION

# DEFINITION

Eating away of metals is called corrosion.

# Conditions for corrosion to occur

• Presence of air
• Presence of water.
# RUSTING

It is the type of corrosion which occurs die to the formation of brown colored layer
of iron oxide called rust formed on iron when exposed to moist air.

Chemical Formulae Fe2O3 .XH2O

Chemical reaction

Iron + water + oxygen → hydrated iron (III) oxide

Fe(s) + 3O2(g)+ XH2O 2Fe2O3 .XH2O(s)

Aluminium does not rust - corrode. Its surface is protected by a

natural layer of aluminium oxide. This prevents the metal below
from coming into contact with air and oxygen.
#To study the conditions necessary for corrosion to occur.

Take three test tubes A,B,C and put iron nails in each of the test tubes.

 In test tube A fill it half with tap water.

 In test tube B add boiling water and pour oil over it.
 In test tube C add anhydrous calcium chloride(cacl2)

Observation

Test tube Observation inference

A Rusting occurs Since it has both air &
water. Iron reacts to form
Fe2O3 .XH2O
B No rusting occurs Since the boiled water
expels the air from it and
oil layer prevents further
reaction with air.
C No rusting occurs anhydrous calcium
chloride(cacl2), absorbs
the moisture from the air
present in the test tube.
So in the absence of air
no rusting occurs
 ACTIVITY TO SHOW HOW RUSTING OCCURS

# WAYS TO PREVENT CORROSION

⇒ Oiling and greasing

It cuts off the contact between the metal and moist air and prevents it from
rusting.

⇒ Painting

Paint also cuts off the contact between the metal and moist air and prevents it
from rusting.

⇒ Galvanisation

It is the process of coating the surface of iron with the layer of zinc
metal.
This is done by dipping the iron objects into molten zinc.

⇒ Electroplating

It is the process of depositing thin layer of another lesser reactive

metal like tin or chromium on its surface with help of electric current.