MOBILE TEST & DATA LOGGING EQUIPMENT

Introduction
Todays hydraulics industry is becoming increasingly aware of the vast savings that can be made with a structured and pro-active maintenance programme system. Not only in terms of reduced downtime, but component replacement and unnecessary system strain can be kept in check with the correct diagnostic equipment. With the wide range of instrumentation and sensors available from Hydrotechnik, we can offer you the perfect test solution to suit your budget. High scanning rates, excellent accuracy and proven reliability make Hydrotechnik test equipment the natural choice within the industry. All of the hand held instruments within our range are compatible with the HydroWin software package. HydroWin allows for detailed zoom, spot, overlay and archive creation features. This is undoubtedly one of the most powerful hydraulic diagnostic software packages available today. The combination of accurate instrumentation and powerful software are proving to be invaluable tools to R&D and Service engineers in the quest for greater component efficiency and overall system performance.

The excellent Hydrocomsys hydraulic analysis software is common across the entire hand held product range. This is a powerful, windows based programme, capable of advanced analysis of hydraulic system performance. It is shipped FREE with all hand held units with memory capability. See page 39 for more details

For more information and pricing requests please call 0800 068 4134 (+44 (0)1159 003550) or email: [email protected]

29

MOBILE TEST & DATA LOGGING EQUIPMENT OVERVIEW

Multi-Handy 2020 Multi-Handy 3010 Multi-Handy 3050

Measuring inputs

Total 2 input connection sockets Total 3 input connection sockets 2x 6-pol, analogue inputs 0 to 2x 6-pol, analogue inputs 0 to 20 mA, 4 to 20 mA 20 mA, 4 to 20 mA 1x 6-pol, digital signal inputs 0.25 Hz to 5 kHz Connecting ISDS sensors pressure, temperature, volume flow viaf/I converter a.s.o. only pressure measurement when connecting sensors without ISDS Analogue inputs: 1 ms 12 bit +0.2% of FV Pressure, temperature, frequency, volume flow, rotational speed, current, power, torque, way and speed a.s.o

Total 4 input connection sockets 3x 6-pol, analogue signal inputs 0 to 20 mA, 4 to 20 mA 1x 6pol, digital signal inputs 0.25 Hz to 5 kHz Pressure, temperature, frequency, volume flow, rotational speed, current, power, torque, way and speed a.s.o

Standard measurands

Measuring rate Resolution A/D-converter Error limit Extreme value memory

Analogue inputs: 1 ms 10 bit Analog: +0.2% of FV Digital: +0.2% of MV

Analogue inputs: 1 ms 12 bit Analog: +0.2% of FV Digital: +0.2% of MV

Min and Max value storing of all Min and Max value storing of all Min and Max value storing of all measu- ring channels, measu- ring channels, measuring channels, selectable selectable with key selectable with key with key 128 kB, 60.000 analogue measuring values in max. 1 series, 2 bytes/measuring value, scan rate: 1 ms None 256 kB, est. 115.000 analogue measuring values or 57.500 frequency values in max. 5 series, scan rate: 1ms to 10 min Settable with pre-trigger 900 kB, est. 450.000 analogue measuring values or 150.000 frequency values in max 15 series, scan rate: 1ms to 10 min Settable with one of the four channels with pre-trigger, manual trigger start or without trigger Operation display with 8 lines, illuminated 3.2" display, digit height 4; auto doubled digit size for max. 4 lines measurement value display Centronics, RS 232, USB Internal 14.4 V NiCd batteries with 1.1 Ah for approx. 8 hours of continuous operation EN 50081-1 and EN 50082-1 IP 40 Operation temp.: 0C to +50C relative humidity: <80%(not condensing)storage: -20C to +70C Housing material: ABS plastic Dimensions: 222 x 105 x 75 RoHs conformity Weight: est. 0.826 kg

Measuring value memory

Trigger

Display

LCD graphic display (75 x 50) backlight illumination

Operation display with 8 lines, illuminated 3.2" display, digit height 4; auto doubled digit size for max. 4 lines measurement value display RS 232 14.4 V NiCd batteries with 700 mAh, 8 hours continuous operation EN 50081-1 and EN 50082-1 IP 40 Operation temp.: 0C to +50C relative humidity: <80%(not condensing)storage: -20C to +70C Housing material: Al dye-casting casing Dimensions: 160 x 80 x 40mm RoHs conformity Weight: est. 0.661 kg

Interfaces Power supply

USB NiMH batteries 2.4 V, with est. 2000 mAh, allow supplyindependant operation of up to 6 hours EN 50081-1 and EN 50082-1 IP 40 Operation temp.: 0C to +60C relative humidity: <80% (not condensing) storage: -20C to +70C Housing material: ABS plastic Dimensions: 185 x 90 x 46 RoHs conformity Weight: est. 0.292 kg

CE labelling Protection type Ambient conditions

General

Outputs

For more information and pricing requests please call 0800 068 4134 (+44 (0)1159 003550) or email: [email protected]

30

MOBILE TEST & DATA LOGGING EQUIPMENT OVERVIEW

Multi-System 5060 Multi-System 8050 Multi-Control 8050

Total 8 input connection sockets 6x 6-pol, analogue signal inputs 2x 6-pol, digital signal inputs 0.25 Hz to 10 kHz 0/4 to 20 mA, 0 to 10 V, 10 V, 0.5 to 4.5 V Pressure, temperature, volume flow rotational speed, current, power, torque, way and speed, a.s.o.

Total 16 input connection sockets 10x 6-pol, analogue signal inputs, 2x input socket for current 2 ADC and voltage 48 VDC 0 to 20 mA, 4 to 20mA, 0 to 10 VDC, 10 VDC 4x 6-pol, digital signal inputs 0.25 Hz to 5 kHz 6x CAN inputs (optional 14) Pressure, temperature, volume flow rotational speed, current, power, torque, way and speed, quantity measurement a.s.o.

Measuring inputs

Standard measurands

Analogue inputs: 0.1 ms 13 bit Analogue 0.1% of final value Digital 0.02% of measured value

Analogue inputs: 0.1 ms/1 ms Analogue inputs: 16 bit Current, voltage input: 12 bit Analogue: 0.1% of final value Current, voltage input: 0.2% of measured value

Measuring rate Resolution A/D-converter Error limit Extreme value memory

Min and Max value storage of all Min and Max value storage of all measuring channels, selectable with measuring channels, selectable key with key 128 MB (SD card) in max. 200 128 MB in max. 200 series, optional expandable to 1GB max. 6 mio. series, optional expandable to values/series (24 MB) scan rate: 0.1 ms to 99 min 1 GB max. 2 mio. values/series (8 MB), scan rate: 0.1 ms to 99 minutes Settable, external triggering,pre- Settable, external triggering, pre-trigger trigger, 2 instruments can be coupled 3.5" colour display, full graphical 10.4"-TFT-touchpanel, full abilities, 320 x 240 pixels, 4096 graphical abilities with colors 800 x 600 pixels 30 presentable channels Black-box operation with PC 30 presentable channels

Measured value memory

Trigger

Display

RS 232, USB Device and Host, CAN NiMH batteries 14.4 V/2150 mAh, allow independant operation of up to 8 hours EN 50081-1 and EN 50082-1 IP 40 Operation temp.: 0C to +60C Relative humidity: <80% (not condensing) Storage: -20C to +70C Housing material: ABS plastic Dims: est. 240 x 130 x 60 RoHs conformity Weight: est. 1.062 kg

RS 232, USB, CAN, Centronics, LVDS With direct current 24 VDC, with protection against reverse-polarity and over-voltage, the device is protected with self-reversing fuse resistors (PTC) EN 50081-1 and EN 50082-1 Device front: IP 40; casing: IP 40; measuring inputs: IP 40 Operation temperature: Operation temperature: 0C to +40C 0C to +60C Relative humidity: 0% to 85% (not condensing) Storage: -20C to +60C Housing material: Aluminium Housing material: Aluminium powder-coated, RAL 3004 powder-coated, RAL 3004 Dims: est. 310 x 254 x 60 Dims: est. 310 x 254 x 60 RoHs conformity RoHs conformity Weight: 3.1 kg Weight: 3.1 kg 2 analogue outputs to issue signals of the signal generator or to transfer measured values of a measuring input 4 digital outputs for the solving of control functions, one is a trigger output

Interfaces Power supply

CE labelling Protection type Ambient conditions

General

Trigger output

Outputs

For more information and pricing requests please call 0800 068 4134 (+44 (0)1159 003550) or email: [email protected]

31

MOBILE TEST & DATA LOGGING EQUIPMENT

Icon overview
Description of features for instruments shown on the next few pages ISDS is the automatic transmission of parameters and calibration data from the sensor to the measuring instrument: connect switch on measure.
Trigger- and pre-trigger functions for the automatic storage of a given condition recording the event.

Normed measuring input for analogsensors with an output signal e.g.: 0 to 20 / 4 to 20 mA or 0 to 10 VDC

USB-interface

Digital inputs and outputs

RS 232-interface

Frequency input

Monitoring and storage of CAN bus data

Extreme value display

Basic only for mobile measuring instrument Multi-Handy 2020

Display background illumination

HYDROcomsysWin 32 for all hand held instruments MH 3010, MH 3050, MS 5060, MS 8050

Display for text and grahpics

Limit value via relay

Measured data storable in the instrument

For more information and pricing requests please call 0800 068 4134 (+44 (0)1159 003550) or email: [email protected]

32

MOBILE TEST & DATA LOGGING EQUIPMENT

Multi-Handy 2020
Low cost - robust 2 channel test and data logging, setting new standards
Hydrotechnik have developed a low cost digital pressure test kit with some powerful features. The kit is supplied with two selectable pressure trandusers which the 2020 recognises when plugged in (ISDS). The 2020 has a 60,000 measuring value memory, backlit display, 1ms scanning rate and also can be used with a downloadable light version of Hydrowin software which is upgradeable to the full version, all for an unbelievable low price. Other ISDS sensors such as flow meters or RPM probes can be used with the 2020 to extend its useability.

Measuring Kit
2020-pp-600-600 2020-pp-400-400 2020-pp-200-200 2020-pp-60-600 2020-pp-60-60 2020-pp-6-60
All models are 2x analogue Only available in Measuring Kit

Pressure ranges
2x 2x 2x 1x 1x 2x 1x 1x 0 to 600 bar 0 to 400 bar 0 to 200 bar 0 to 60 bar 0 to 600 bar 0 to 60 bar -1 to 6 bar 0 to 60 bar

Order number
3160-18-18-69.00 3160-15-15-69.00 3160-10-10-69.00 3160-21-18-69.00 3160-21-21-69.00 3160-32-21-69.00

Two analogue measuring inputs for 0 to 20 mA 12 bit Analog/Digital-converter Automatic calculation of the difference from two measuring channels LCD graphic display with switchable backlight and automatic display adaption 128 kB of measuring value memory (one measuring series with 60.000 values)

Measuring rate 1 ms Simple operation with only four keys Light plastic housing with battery compartment for standard NiMH chargeable batteries Fast data transmission with USB virtual COM-interface

For more information and pricing requests please call 0800 068 4134 (+44 (0)1159 003550) or email: [email protected]

33

MOBILE TEST & DATA LOGGING EQUIPMENT

Multi-Handy 3010 the perfect solution for robust uses
This is the entry level instrument for real detailed hydraulic diagnosis. The 3010 comes with three channels, internal memory of up to 115,000 readings, 1mS scanning rate multi line backlit display and the full version of Hydrowin making the unit an economic solution for measuring multiple diagnostics.

Measuring channels
2x analogue / 1x frequency

Order number
3160-00-67.00

Two analogue measuring inputs for 0 to 20 mA or 4 to 20 mA one frequency input to max. 5 kHz 10 bit Analog/Digital-converter Calculated values from two measuring channels for pressure difference, sum, power and the function y = f (t) LCD display with eight lines 256 kB measurement value memory (five measuring series with the total of 115.000 analog or 57.500 frequency values)

Measuring rate: 1 ms Direct or menu-controlled operation Robust, aluminium housing Data transmission with RS 232 interface Also available as Measuring Kit in a case, see sensor section for suitable sensors for your kit needs.

For more information and pricing requests please call 0800 068 4134 (+44 (0)1159 003550) or email: [email protected]

34

MOBILE TEST & DATA LOGGING EQUIPMENT

Multi-Handy 3050 the entry into system technology
The 3050 is the ultimate field service diagnostic instrument until its rugged, compact design and powerful internal memory (450,000 readings), 4 channel input for multiple diagnosis, 1ms scanning rate and is supplied with full Hydrowin software making it the instrument of choice for all mobile engineers as well as R&D

Measuring channels
3x analaogue, 1x frequency

Order number
3160-00-63.00

Three analogue measuring inputs for 0 to 20 mA or 4 to 20 mA One frequency input to max. 5 kHz 12 bit Analog/Digital-converter Calculated values from two measuring channels for pressure difference, sum, power and the function y = f (t) LCD display with eight lines 900 kB measurement value memory(15 measuring series with the total of 450.000analog or 150.000 frequency values)

Measuring rate 1 ms Direct or menu-controlled operation Robust plastic housing Data transmission with USB or RS 232 interface Also available as Measuring Kit in a case,see sensor section for suitable sensors for your kit needs.

For more information and pricing requests please call 0800 068 4134 (+44 (0)1159 003550) or email: [email protected]

35

MOBILE TEST & DATA LOGGING EQUIPMENT

Multi-System 5060 the new mobile all-rounder
The 5060 is the all new next generation hand held data logger from Hydrotechnik. Using the latest technology it is the new benchmark for mobile hydraulic diagnostic measurement and logging as was its processor the 5050 before. The unit now has increased to eight channels as well as 14 CAN Bus channels capability. With 128 Mb of internal memory (upgradeable to 1Mb), 0.1mS scanning rate, hi-res colour screen, graph, text, pictorial outputs, sleek design and much much more make it the must have instrument and choice for all hydraulic professionals.

22 measuring channels including 14 CAN bus channels!

Measuring channels

Order number

6x analogue, 2x frequency, 14x CAN bus Channels 3160-00-70.00 Power pack and USB data cable are part of the delivery

Six analogue measuring inputs for 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 0.5 to 4.5 V, 10 V Two frequency inputs to max. 10 kHz Trigger input and output 14 CAN bus signal inputs 13 bit Analog/Digital-converter Calculated channels with fixed or freely definable formulas 3.5" color display with full graphical abilities and 4.096 colors (320 x 240 pixel) 128 MB measurement value memory expandable to max. 1 GB (SD card) 200 measurement series with the total of two million values per measurement Measuring rate 0.1 ms Menu controlled operation

Light plastic housing Data transmission with USB interface (device and host interface) Hardware and software filter CAN database to store the parameters of CAN sensors Sensor database to store sensor parameters PASS function for the execution of automated measuring tasks Project management for the storing ofmax. 20 instrument configurations Help function Mains power pack and USB data cable included as part of delivery Also available as Measuring Kit in a case, see sensor section for suitable sensors for your kit needs.

For more information and pricing requests please call 0800 068 4134 (+44 (0)1159 003550) or email: [email protected]

36