Product Information

DuPont Delrin
acetal resin

Delrin 100AF

Delrin 100AF is a high viscosity acetal homopolymer containing 20% Teflon PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, and other surfaces.
Property Identification Resin Identification Part Marking Code Mechanical Stress at Break Strain at Break Tensile Modulus Flexural Modulus Notched Charpy Impact Strength Unnotched Charpy Impact Strength Thermal Melting Temperature 10C/min CLTE, Normal -40 - 23C (-40 - 73F) 23 - 55C (73 - 130F) 55 - 100C (130 - 212F) CLTE, Parallel -40 - 23C (-40 - 73F) 23 - 55C (73 - 130F) 55 - 100C (130 - 212F)
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23C unless otherwise stated. The DuPont Oval Logo, DuPont, The miracles of science and Delrin are trademarks or registered trademarks of DuPont Company. Copyright 2006.

Test Method

Units

Value

ISO 1043 ISO 11469 ISO 527 ISO 527 ISO 527 ISO 178 ISO 179/1eA ISO 179/1eU ISO 11357-1/-3 ISO 11359-1/-2 MPa (kpsi) % MPa (kpsi) MPa (kpsi) kJ/m2 kJ/m
2

POM-SF20 >POM-SF20< 53 (7.7) 15 (10) 2700 (390) 2500 (360) 5 70

C (F) 178 (350) E-4/C (E-4/F) 1.0 (0.56) 1.1 (0.61) 1.3 (0.69)

ISO 11359-1/-2

E-4/C (E-4/F) 1.0 (0.57) 1.1 (0.62) 1.3 (0.70)

060411/060413
The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.

plastics.dupont.com
1/2

Product Information

Delrin 100AF

Property Flammability Flammability Classification 1.5mm 3.0mm Flammability Classification 1.5mm 3.0mm Temperature Index RTI, Electrical 1.5mm 3.0mm 6.0mm RTI, Impact 1.5mm 3.0mm 6.0mm RTI, Strength 1.5mm 3.0mm Other Density Processing Melt Temperature Range Melt Temperature Optimum Mold Temperature Range Mold Temperature Optimum Drying Time, Dehumidified Dryer Drying Temperature Processing Moisture Content Hold Pressure Range

Test Method

Units

Value

IEC 60695-11-10 HB HB UL94 HB HB UL 746B C 105 105 105 UL 746B C 85 85 85 UL 746B C 90 90 ISO 1183 kg/m3 (g/cm3) C (F) C (F) C (F) C (F) h C (F) % MPa (kpsi) 1540 (1.54) 210-220 (410-430) 215 (420) 80-100 (175-210) 90 (195) 2-4 80 (175) <0.2 90-110 (13-16)

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23C unless otherwise stated. The DuPont Oval Logo, DuPont, The miracles of science and Delrin are trademarks or registered trademarks of DuPont Company. Copyright 2006.

060411/060413
The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.

plastics.dupont.com
2/2