0% found this document useful (0 votes)
47 views

Spring Cage Knife Disconnect Feed-Through Terminal Block ST 2,5-MT

This document provides product specifications for a Spring Cage Knife Disconnect Feed-Through Terminal Block. The key details are: 1. It is a spring cage terminal block for mounting on DIN rails, with an order number of 30 36 34 3 30 30 48 8. 2. It has a terminal width of 5.2mm and can accommodate wire cross sections between 0.08-4mm2 for rigid solid wire or 0.08-2.5mm2 for flexible stranded wire. 3. It has a maximum current rating of 16A and voltage rating of 400V.

Uploaded by

steam100deg8229
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
47 views

Spring Cage Knife Disconnect Feed-Through Terminal Block ST 2,5-MT

This document provides product specifications for a Spring Cage Knife Disconnect Feed-Through Terminal Block. The key details are: 1. It is a spring cage terminal block for mounting on DIN rails, with an order number of 30 36 34 3 30 30 48 8. 2. It has a terminal width of 5.2mm and can accommodate wire cross sections between 0.08-4mm2 for rigid solid wire or 0.08-2.5mm2 for flexible stranded wire. 3. It has a maximum current rating of 16A and voltage rating of 400V.

Uploaded by

steam100deg8229
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Spring Cage Knife Disconnect Feed-Through Terminal Block ST 2,5-MT

(IEC) [mm2] IEC 60 947-7-1

rigid solid 0.08-4

exible stranded 0.08-2.5

AWG 28-12

I [A] 16

U [V] 400

Technical data
Spring cage terminal block, for mounting on 3 (1) End cover

Type ST 2,5-MT D-ST 2,5-TWIN

Order No. 30 36 34 3 30 30 48 8

Pcs. Pkt.
50 50

gray

terminal width 5.2

gray

(3) Plug-in bridge, for cross-connections in the terminal center

(2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections white Cross section range: 0.08-0.2 mm2 0.25-0.5 mm2 gray black 0.75-1 mm2 2-pos. 3-pos. 4-pos. 5-pos. 10-pos. 20-pos.

(8) Warning cover, for the operating shafts of the mini-spring ST spring cage terminal blocks (9) Screwdriver, for actuating the tension spring

(6) 2.3 mm test connector1), consisting of metal part and red insulating sleeve (7) Modular test connector, can be labeled with ZBF 5

(5) Test adapter, for 4 mm test connector PS and 4 mm safety test connectors, making contact in the bridge shaft

(4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick

FBS 2-5 FBS 3-5 FBS 4-5 FBS 5-5 FBS 10-5 FBS 20-5

ISH 2,5/0,2 ISH 2,5/0,5 ISH 2,5/1 Imax.: 24 A 24 A 24 A 24 A 24 A 24 A

30 02 84 3 30 02 85 6 30 02 86 9

30 30 16 1 30 30 17 4 30 30 18 7 30 30 19 0 30 30 21 3 30 30 22 6

50 50 50

50 50 50 50 10 10

ATP-ST-TWIN PAI 4 MPS-RD PS 5 WST 2,5 SZF 1 - 0,6 x 3,5 ZBF 5:UNPRINTED ZB 5:UNPRINTED

30 30 78 9 30 30 92 5 02 01 55 3 30 30 98 3 30 30 94 1 12 04 51 7 08 08 64 2 10 50 00 4

50 10 10 10 10 10 10 10

(10) Zack strip, at, for labeling the outer marker grooves white (11) Zack strip, 10-section, for labeling in the terminal center

white

Dimensions Width / length / end cover width [mm] Height (NS 35/7.5 / NS 35/15) [mm] Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] Rated surge voltage / contamination class [kV] / Surge voltage category / insulation material group / Connection capacity Stranded with ferrule with plastic sleeve [mm2] Stranded with ferrule without plastic sleeve [mm2] Stranded with TWIN ferrule with plastic sleeve [mm2] Stripping length [mm] Internal cylindrical gauge (IEC 60 947-1) Insulating material Inflammability class in accordance with UL 94 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG CSA/CUL: [V] / [A] / AWG
1

5.2 / 60.5 / 2.2 36.5 / 44 16 / 4 6/3 III / I 0.25 - 2.5 0.25 - 2.5 0.5 10 A3 PA V0

) Further colors on request. Phoenix Contact page 2 of 4

You might also like