Scribd
Upload
247 views

Netbios Hacking

This document provides instructions for hacking into a remote computer using NetBIOS. It is a 4 step process: 1. Use the net view command at the command prompt to view shared resources like hard disks and printers on the remote computer. 2. Use the net use command to map a network drive letter on your computer to the shared resources you want to access, like hard disks or printers. 3. You will get a message that the command completed successfully, indicating you now have access to the remote computer's files and can copy them to your computer. 4. You can now see and access the remote computer's hard drive from your computer and copy or modify files, though write access depends on

Uploaded by

coolgrldivyarocks
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
247 views

Netbios Hacking

This document provides instructions for hacking into a remote computer using NetBIOS. It is a 4 step process: 1. Use the net view command at the command prompt to view shared resources like hard disks and printers on the remote computer. 2. Use the net use command to map a network drive letter on your computer to the shared resources you want to access, like hard disks or printers. 3. You will get a message that the command completed successfully, indicating you now have access to the remote computer's files and can copy them to your computer. 4. You can now see and access the remote computer's hard drive from your computer and copy or modify files, though write access depends on

Uploaded by

coolgrldivyarocks
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Netbios Hacking

Submitted by Srikanth on Friday, 14 December 200759 Comments

THIS NETBIOS HACKING GUIDE WILL TELL YOU ABOUT HACKING REMOTE
COMPUTER AND GAINING ACCESS TO IT’S HARD-DISK OR PRINTER.NETBIOS
HACK IS THE EASIEST WAY TO BREAK INTO A REMOTE COMPUTER.
STEP-BY-STEP NETBIOS HACKING PROCEDURE
1.Open command prompt
2. In the command prompt use the “net view” command
( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP-TOOLS” SOFTWARE BY
ENTERING RANGE OF IP ADDRESSS.BY THIS METHOD YOU CAN SCAN NUMBER
OF COMPUTERS AT A TIME).
Example: C:\>net view \\219.64.55.112
The above is an example for operation using command prompt.”net view” is one of the
netbios command to view the shared resources of the remote computer.Here “219.64.55.112″
is an IP address of remote computer that is to be hacked through Netbios.You have to
substitute a vlaid IP address in it’s place.If succeeded a list of HARD-DISK DRIVES &
PRINTERS are shown.If not an error message is displayed. So repeat the procedure 2 with a
different IP address.
3. After succeeding, use the “net use” command in the command prompt.The “net use” is
another netbios command which makes it possible to hack remote drives or printers.
Example-1:
C:\>net use D: \\219.64.55.112\F
Example-2:
C:\>net use G: \\219.64.55.112\SharedDocs
Example-3:
C:\>net use I: \\219.64.55.112\Myprint

NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created
on your computer to access remote computer’s hard-disk.
NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES
INCLUDING HARD-DISK DRIVES,FLOPPY DRIVES AND ROM-DRIVES ON
YOUR COMPUTER.THAT IS IF YOU HAVE C: & D: AS HARD DIRVES, A: AS
FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN
THE COMMAND PROMPT
F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that you want to
hack. “Myprint” is the name of remote computer’s printer.These are displayed after giving
“net use” command. “219.64.55.112″ is the IP address of remote computer that you want to
hack.
4. After succeeding your computer will give a message that “The command completed
successfully“. Once you get the above message you are only one step away from hacking the
computer.
Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the specified
name.You can open it and access remote computer’s Hard-Drive.You can copy
files,music,folders etc. from victim’s hard-drive.You can delete/modify data on victim’s
hard-drive only if WRITE-ACCESS is enabled on victim’s system.You can access
files\folders quickly through “Command Prompt”.
NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In
Gaining Access To Remote Computer Through Netbios.That is Netbios Hacking Is Not
Possible In This Situation.(An Error Message Is Displayed).So Repeat The Procedure
2,3 With Different IP Address.
HAPPY NETBOS HACKING!!

You might also like