0% found this document useful (0 votes)
241 views

DSP Sorted Bits (TheWebEagles)

This document contains definitions, questions, and explanations related to signals and systems topics such as discrete time signals and systems, z-transforms, Fourier transforms, DFT, FFT, convolution, linear and nonlinear systems. Some key points covered include: - The DFT is used to find the frequency spectrum of periodic signals. It represents the signal in the frequency domain as a sum of sinusoids. - FFT algorithms can be used to efficiently compute the DFT, reducing the computational complexity from O(N^2) to O(NlogN). - Linear time-invariant (LTI) systems have properties like superposition and their output does not change over time. Their behavior can be described by

Uploaded by

Dinesh Kumar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
241 views

DSP Sorted Bits (TheWebEagles)

This document contains definitions, questions, and explanations related to signals and systems topics such as discrete time signals and systems, z-transforms, Fourier transforms, DFT, FFT, convolution, linear and nonlinear systems. Some key points covered include: - The DFT is used to find the frequency spectrum of periodic signals. It represents the signal in the frequency domain as a sum of sinusoids. - FFT algorithms can be used to efficiently compute the DFT, reducing the computational complexity from O(N^2) to O(NlogN). - Linear time-invariant (LTI) systems have properties like superposition and their output does not change over time. Their behavior can be described by

Uploaded by

Dinesh Kumar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

www.webthunders.

tk

www.thewebeagles.blogspot.com


_____transforms are used to determine system functon of the discrete system : Z
A causal LTI system with system transfer functon H(z)=1-a-1>z-1>/1-az-1>.determine the diference equaton that relates
x(n) and y(n) :
A signal which is a functon of single independent variable is called One dimensional signal
A signal which is a functon of single independent variable is called : One dimensional
A system is called ____ if its input output characteristc do not change with tme : Time variant
A system whose output y(n) at tme n depends on any number of past value is called ___systems : recursive
Arrange the 8-point sequence in bit reversal order :
Arrange the 8-point sequence x(n)=(1,2,3,4,-1,-2,-3,-4) in bit reversal order :
Associatve property of convoluton :
At frst LTI system will behave as a lowpass
Calculate the frequency response of LTI system represented by h(n)-delta(n)-delta(n-1) 1+e-
jinf
Calculate the number of additons needed in the calculaton of DFT using FFT algorithm with 64-point sequence 384
Calculate the number of additons needed in the calculaton of DFT using FFT algorithm with 64-poing sequence 384
Calculate the number of multplicatons needed in the calculaton of DFT using FFT algorithm with 128-point sequence 448
Compute 4-point DFT of a sequence x(n)=[0,1,2,3] using DIT algorithm (6,-2+2j,-2,-2-j)
Compute the 8-point DFT of the sequence x(n)=1: 0<n<7 and 0 others {8,0,0,0,0,0,0,0}
Determine the DTFT of the reference x(n)=(1,-1,1,1-) :
Determine the energy of the signal x(n)=(1/3)
n
u(n) 9/8
Determine the even part of the signal x(n)=(3,2,1,3f>,3,3,0) {1.5,2.5,2.(3),2,2.5,1.5}
Determine the frequency response of the system :
Determine the fundamental period of signal x(n)=e
j6m
1
Determine the fundamental period of the signal : 24
Determine the fundamental period of the signal : 24
Determine the fundamental period of the signal x(n_=ejw0 1
Determine the IDFT of x(k)=(1,0,1,0) (0.5,0,0.5,0)
Determine the impulse response of the discrete system described by :

Determine the non causa system y(n) = x(n2)
Determine the order of the system given by 2
Determine the power of the unit step sequence >
Determine the step response of the causal system described by the diference equaton y(n)=Y(n-1)+x(n) :
Determine the system functon described by the equaton y(n)+a y(n-1)=x(n) 1/1+az-1
Determine the tme variant system from the following Y(n)=nx(n)
DFS :
DFS [Xp0(n)] =?
DFS is used to fnd the frequency spectrum of _______Signals Periodic
DFT :
DFT :
DFT [x((n m))N]>=?
DFT [x((-n))N] X(N-K)
Discrete tme system stable if the poles are located With in unit circle Z <1
DTFT [delta(n+2) delta(n-2)] 2COS @
DTFT [ejw0nx(n)]=?
www.webthunders.tk

www.thewebeagles.blogspot.com

DTFT [x(n-k)] e
-jwk
x(e
jw
)
Find DFT of the sequence x(n)=(1,2,3,0) using DIF algorithm :
Find the DFT of the sequence x(n)=(1,0,0,1) using DIF algorithm (2,1+j,0,1-j)
Find the DFT of the sequence x(n)=(1,0,0,1) using DIF algorithm :
Find the fundamental period of the signal x(n)=Cos(2pi/3) 6
Find the IDFT of x(k)=(1,0,1,0) (0.5,0,0,5,0)
Find the inverse z-transform :
Find the linear convoluton of sequence x(n)=(1,0,5) and h(n)=(0,5,1) (0.5,1,25,0.5)
Find the linear convoluton of two sequences x1(n)=(1,2) and x2(n)=(3,4) (3,8,10)
Find the linear convoluton of two sequences x1(n)=(1,2) and x2(n)=3,4) (3,8,10)
Find the response of the system y(n)=5/6 y(n-1)-1/6 y(n-2)+x(n) to the input signal x(n)=&delta(n)-1/3 &delta(n-1) :

Find the response of the system y(n)=5/6 y(n-1)-1/6 Y9n-2)+x(n) to the input signal x(n)-&delta(n)-1/3 &delta(n-1) (1/2)
n

u(n)
Find the response of the system y(n)=5/6 y(n-1)-1/6y(n-2)+x(n) to the input signal x(n)=delta(n)-1/3 delta(n-1) (1/2)
n
u(n)
Find the ROC of the signal x(n) Q(n-2) z>1
Find the ROC of the signal x(n)=u(n-2) X>1
Find the stable system from the following :
Find the stable system from the following y(n)=cos[x(n)]
Find the system functon described by the diference equaton y(n)=x(n)+2x(n-1)+4x(n-2)+x(n-3) 1+2z-1>-4z-2>+z-3
Furrier transform of the signal :
Identfy the dynamic system Y(N)= ax2(n) + x(n)
Identfy the dynamic system y(n)=x(n)+x(n-1)
Identfy the non linear system y(n)=cosx(n)
Identfy the unstable system :
Identfy the unstable system y(n) = x(n)e
n

If is a period with N samples and DFS then :
If the roots of CE are lambda1 lambda1 lambda2 lambda14 are distnct, then the homogeneous soluton of the
discrete tme system is c1@1n+c2@2n+.....cN@Nn @=Lambda
If xp(n) is periodic with period N, then DFS [e
j2w10/N
Np(n)] X
P
(K-1)
In DIT radix-2 FFT, what is the name of the domain to be decimated tme
Number of complex additons required to calculate Radix-2 FFT is N log
2
N
Number of complex multplicatons required to calculate N- point DFT is N
2

Number of complex multplicatons required to calculate N-point DFT is N
2

Number of complex multplicatons required to calculate radix-2 FFT is N/2 log
2
N
The DFS is used to fnd the spectrum of periodic signals
The energy of the discrete tme signal x(n) is defned as
The following block diagram shows in fg ___ : parallel
The frequency increment at equal spacing around the unit circle is called : Bin spacing
The frequency increment at equal spacing around the unit circle is called : Bin spacing.
The frequency range of X-rays 3X1017HZ 4X1018HZ
The frequency response of the frst order systems described by a y(n-1)=x(n) is
The natural signals like ____cannot be expressed by mathematcal equatons : ECG
The number of buterfies stage to calculate 16-point DIT-FFT : 8
The number of buterfies stage to calculate 16-point DIT-FFT 8
The number of stages required to calculate 16-point DIT-FFT : 4
The partcular soluton is also called Forced response
www.webthunders.tk

www.thewebeagles.blogspot.com

The region of convergence (ROC) of X(z) is set of all values of z for which x(z) atains a fnite values
The ROC of the signal x(n)={1,2,5,7,0.1} entre z-plane except z=0 and z=&infn
The value of (W8)0 1
The value of (w
8
)
1
= 0.707-j0.707
The z-transform of &delta(n) : 1
The Z-transform of &delta(n) 1
The z-transform of a discrete tme signal x(n) is defned as :
The z-transform of u(n) is z/z-1
Two signals then fnd :
Two signals x1(n) = {1,2,3,4} and x2(n)={4,3,2,1} then fnd X1(n) +x2(n) {5,5,5,5}
What is the main diference between DTFT & DFT in the frequency domain : DTFT is contnuous & DFT is discrete
What is the main diference between DTFT and DFT in the frequency domain DTFT is contnuous & DFT is discrete
What is the main disadvantage of direct form realizaton : sensitve to parameter quantzaton
What is the order of the system described by the diference equaton by y(n)-ay(n)=x(n) is 1
What is the order of the system for the diference equaton is
What is the order of the system for the diference equaton is
4
What is the speed improvement factor in calculatng 64 point DFT of a sequence Using direct computaton and FFT
algorithm 21,33
What is zero padding adding zero to a sequence
When a discrete tme signal x(n) satsfes the conditon x(n)=x(n+N), then it is called Periodic signal
When the system is said to be tme invariant :
Which of the following operaton is not involved in linear convoluton : Dividing.
Which of the following signal is even signal : cos 3t

You might also like