Scribd
Upload
228 views

Enertec DG Control Module

The document describes the GL4K control panel for generator sets. It features the RGK50 Lovato controller, which offers outstanding functions, user-friendliness, complete protection and data display. The controller provides powerful software for programming, controlling and monitoring. It also offers benefits such as optional remote communication, CSA approval and reliability at extreme temperatures.

Uploaded by

mrashid286
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
228 views

Enertec DG Control Module

The document describes the GL4K control panel for generator sets. It features the RGK50 Lovato controller, which offers outstanding functions, user-friendliness, complete protection and data display. The controller provides powerful software for programming, controlling and monitoring. It also offers benefits such as optional remote communication, CSA approval and reliability at extreme temperatures.

Uploaded by

mrashid286
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GL4K

CONTROL PANEL FOR GENERATOR SET

RGK50 Lovato controller

BENEFITS
Outstanding functions & user-friendliness Complete protection & data display Optional remote communication simplified Optional CANbus communication with engine ECU Ideal for export projects Reliable at extreme temperatures CSA approved control panel

Fast setup on site by the controller keypad or by using an Windows software* Powerful software* available for programming, controlling and monitoring.

List of alarms:
Pre-alarm & shutdown on high coolant temperature [analogue] High coolant temperature [digital] individual analogue (4) and digital (1) sender fault Pre-alarm & shutdown on low oil pressure [analogue] Low oil pressure [digital] Pre-alarm & shutdown on low fuel level [analogue] Low fuel level [digital] High, low & very low battery voltage Defective battery charge alternator Speed signal lost (magnetic pickup) Low / high frequency Defective starter Emergency stop Unexpected stop Engine stop failure Low / high generator frequency Low / high generator voltage Asymmetry / short-circuit & generator overload External generator protection tripping Incorrect generator phase sequence Incorrect main phase sequence Incorrect system frequency setting Generator contactor failure System error Maintenance requested Fuel transfer tank empty Fuel transfer tank too full Rent hours exhausted 4 spare faults* Note: * = option

GENERAL FEATURES
Includes the powerful RGK50 controller from Lovato For AC systems from 120 to 600 Vac, 1 & 3 phases, 50 & 60Hz Complete power & instrumentation display Automatic or manual start (start & stop button) Telecommunication interface included (RS-232) Modem and Internet communication possibility Enclosure painted black with front panel hinge & top cover A.C. voltage input fuse protection (Normal) Breaker for DC input protection Terminal compatible with #10 gauge wire Shock mount for vibration protection included Complete documents for the installation & setup CSA Approved (UL & cUL for the controller) Temperature and oil pressure sender included

RGK50 controller Large LCD graphic display with backlight, functional at -30C Liquid proof (IP 64) Front panel No PT's are required for nominal voltage system to 600 Vac Quick-connect terminal block Operating temperature from -30C to 60C 12 programmable digital [contact] inputs (6 connected in standard) 7 internal output relays (1 form C & 3 x NO form connected in standard) Allows the use of multiple predefined sender models or manual configuration Buttons: START/ STOP/ TEST/ AUTO/ MAN/ RESET-OFF/ HELP / GEN Choice of 5 languages Events, help & alarm text are editable Information on status, alarms and events Events and data recording Automatic call* to a remote PC when a specific fault or event is activated More then 125 system parameters in flash memory Help menu for explanation of the remaining operation Weekly Exerciser Modbus protocol (Via RS-485 com. Card) available for PLC communication

Display Main screen (like the picture above)


Battery voltage (Vdc) CA Current & voltage (3 phases) / frequency / hour meter Fuel level (%) / oil pressure / coolant temperature Maintenance timer (hours)

Display Other information's available


Voltage ph. to ph., ph. to neutral for main & generator sides Active, reactive & apparent power / active-reactive energy Power factor for each phases Engine speed (RPM). Total number of starting attempts & percentage of successful starting attempts All parameters & status of the system Event messages & help

ENERTEC Inc.

2284 chemin Saint-Francois, Dorval, QC, Canada H9P 1K2, Tel: (514) 421-7077, Fax: (514) 421-7078

Electrical Controls Division


TECHNICAL CHARACTERISTICS Power supply: Battery voltage Voltage range Minimum voltage at Start-up Voltage inputs: Voltage range Frequency range Measurement method Wiring type Current inputs: Current range Sender inputs: Pressure current Temperature current Fuel level current Analogue ground signal Speed inputs: Input type Voltage range Frequency range 12 or 24 Vdc 9 to 33 Vdc 6.7 Vdc REMOTE CONTROL SOFTWARE SW20 (Optional) You could read, configure, receive message and control live with a remote PC.

50 to 620 V L-L (358 Vac L-N) 45 to 65 Hz True RMS 1, 2 or 3 phases, with or without neutral 0.02 6 A. true RMS 20 mA max 7 mA max 10 mA max -0.5 to +0.5V AC coupling 5 to 50 Vpp 25 to 5000 Hz

Relay output: power control Contact type 1 NF ("normal") 1 NO ("generator") Rated voltage 250 Vac (440 Vac max) Rated current 8A Main display example from the remote control software SW20 (you can design your own display) Relay output: common alarm Contact type 1 forme C Rated voltage 250 Vac Rated current 8A Relay output: buzzer, fuel, starter Contact type 1 NO (battery + output) Rated voltage 30 Vdc Rated current 5A Measurement characteristics (from 10 to +45C): Voltage/ current 1% 1 digit Frequency 0.2% 1 digit Power 2% 1 digit Energy 2% 1 digit Physical characteristic: Operating temperature Storage temperature Relative humidity Dimensions -30 to +60C -30 to +80C < 90% 17" W x 10" H x 10" D WIRING DIAGRAM:

PARTS Code: GL4K Code: GL4-ZSD RGK-SW20 RGK-SW10 RGK-X01 RGK-ZPROG GL-ZPBAU GL4-ZINV GL-ZEC GL-ZCAUX GL-ZBUZ GL4-ZMODD Control panel GL4K - standard Options: Oil pressure & temperature sender kit Remote control & configuration software SW20, Windows (98 to XP) Configuration software SW10, Windows (95 to XP) Isolated RS-485 port + 12 days clock backup + 2 others output Factory programmed Mushroom button for Emergency Stop Parts and configuration setup for transfer switch / breaker control Heating element for cabinet, 100 watts One auxiliary (10 A @ 120 Vac) contact set relay Ultrasonic audible alarm at front Inside panel installation & configuration of a industrial 12 Vdc modem.

CONTACT US for more information on the RGK50 controller, the SW10 configuration software or the SW20 remote control software.

ENERTEC Inc.

2284 chemin Saint-Francois, Dorval, QC, Canada H9P 1K2, Tel: (514) 421-7077, Fax: (514) 421-7078

You might also like