Scribd
Upload
185 views

Company Name: Calculation Sheet

This document provides a calculation of the design lap length for reinforcement bars in a concrete structure. It includes inputs of material properties, expressions and references from Eurocode standards to calculate the minimum required lap length.

Uploaded by

Alexandra Dumitrescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
185 views

Company Name: Calculation Sheet

This document provides a calculation of the design lap length for reinforcement bars in a concrete structure. It includes inputs of material properties, expressions and references from Eurocode standards to calculate the minimum required lap length.

Uploaded by

Alexandra Dumitrescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

COMPANY NAME

CALCULATION SHEET
Resolve.ro

Calculation No.

CALCULATION NUMBER
Project No.

PROJECT NUMBER
Calc. By Author Date today Date today

Project Title: Subject/Feature:

Project Name
Lap length

Checked By Checker

Lap length

per EN 1992-1-1 Output Design lap length

Input Materials (reinforcement, concrete)

Materials
Concrete class fctk,0.05= Reinforcement

C16/20 1.3 MPa

40 30 80 a= 50 bar type= bent or hooked cd= 25 fyk= fyd= 400 347.826087 1.15

= c= c1 =

mm mm mm mm mm MPa MPa

gs=

The design lap length l0=1*2*3*5*6*lb,rqd=

600

mm

per EN 1992-1-1 - expression (8.10)

The design lap length must exceed l0,min l0,min max{0.3*6*lb,rqd;15*;200 mm}= 5.574136 1 mm MPa 1.794 ct*fctk,0.05/c= 1
'good' conditions sd is the design stress of the bar at the position from where the anchorage is measured from

600 mm

lb,rqd= (/4)*(sd/fbd)= sd= fbd=

2.25*1*2*fctd= fctd= 1= 2=

MPa 0.866667 MPa

per EN 1992-1-1 - expression (3.16) ct - recommended value is 1.0 c - 1.5 for persistent and transient design situations

0.92

Bars in tension 1= 2= straight bar other 3= 1 1 1.05625 1.35625 0.920710028 K= Ast=

Bars in compression 1= 1 2= 1

3= 0.1 1000 mm2

1
cross-sectional area of the transverse reinforcement along the design achorage length lbd are of one lapped bar

2 As= 1256.6371 mm 2 Ast,min= 3.6128316 mm = 0.7928997

per EN 1992-1-1 - Section 8.4.4, Table 8.2

5=

0.7 p= 1.00 =

5= 110 MPa

transverse pressure at ultimate state along lbd

6=

25

the percentage of reinforcement lapped within 0.65l0 from the centre of the lap length considered

References: EN 1992-1-1:2004 - Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings

CALCULATION NUMBER PROJECT NUMBER


Rev. 0 Rev. 0

92-1-1

92-1-1 - expression (8.10)

sign stress of the bar at the position from where the

measured from

mended value is 1.0 persistent and transient design situations

92-1-1 - Section 8.4.4, Table 8.2

centre of the lap length considered

You might also like