International

Quartz Crystal Filter

Product Guide
INDEX
Product Application

16.9 MHz Channel Filters

25 kHz Channel Spacing

Terms and Definitions

Ordering Information
10.7 MHz Channel Filters
12.5 kHz Channel Spacing
20 kHz Channel Spacing
25 kHz Channel Spacing
34 kHz Channel Spacing
21.4 MHz Channel Filters
12.5 kHz Channel Spacing
20 kHz Channel Spacing
25 kHz Channel Spacing
34 kHz Channel Spacing
50 kHz Channel Spacing

45.0 MHz Channel Filters

Fundamental Mode
Third Overtone Mode
70.0 MHz Channel Filters
90.0 MHz Channel Filters
Filters for HF, SSB & VHF Applications
1.4 MHz HF Filters
1.65 MHz HF Filters
5.0 MHz SSB Filters
9.0 MHz SSB Filters
12.7 MHz SSB Filters
35.0 MHz VHF Filters
45.0 MHz VHF Filters

Hy-Q International (Australia) Pty. Ltd.

25 Winterton Road
Clayton, Victoria 3168
Australia
Phone: +61 (03) 9562-8222
Fax: +61 (03) 9562-9009
Email: [email protected]
Internet: www.hy-q.com.au
Specifications subject to change without notice

Page 1 of 10

10 November 2000

General Information

Hy-Q

Application
Quartz crystal filters are the optimum choice where the application requires selective narrow band filtering at HF and VHF frequencies. Because of the
extremely high Q of quartz resonators, crystal filters with a fractional bandwidth of the order of 0.01% to 0.5% can be realised with low insertion loss and high
selectivity. Hy-Q International employs modern computer aided design techniques covering conventional crystal filter realisations and polylithic realisations.
The conventional approach, utilising discrete crystal resonators, is employed at low frequencies and where the selectivity or bandwidth requirements are such
that complex realisations are necessary, as in HF SSB filters. The polylithic approach, using cascaded monolithic dual filter elements, is used at higher
frequencies where the selectivity and bandwidth requirements allow.

Terms and Definitions

Reference Frequency: a frequency defined by specification to which
other frequencies may be referred. Normally, the reference frequency
indicates the centre frequency (fo), the carrier frequency (fc) in SSB
filters.
Relative Attenuation: the difference between the attenuation at a given
frequency and the minimum attenuation in the pass band or the
attenuation at the reference frequency.
Pass Band: bands of frequencies B1(kHz) in which the relative
attenuation is equal or less than a specific value A1(dB).

Spurious Response Attenuation: the minimum attenuation A4(dB)

guaranteed for spurious response in the stop band. Spurious responses
usually occur at frequencies higher than the centre frequency.
Attenuation Guaranteed: the minimum attenuation A2 or A3(dB)
guaranteed in specific frequency ranges.
Terminating Impedances: the impedance presented to the filter by the
source and load, usually expressed in terms of a parallel combination of
resistance and capacitance.

Pass Bandwidth: the separation of frequencies between which the

relative attenuation is equal to or less than a specific value A1(dB).
Pass Band Ripple: R(dB) the greatest difference between the maximum
and the minimum attenuation within a pass band.
Insertion Loss: L(dB) for a specified frequency, the attenuation
resulting from the insertion of a filter into a transmission system , i.e. the
logarithmic ratio of the power delivered to the load before insertion of
the filter to the power delivered to the load after insertion of the filter.
The term Insertion Loss is often loosely used to refer to the minimum
value of the attenuation in the pass band.
Stop Band: band(s) of frequencies in which the relative attenuation is
equal or greater than the specified minimum values.
Stop Bandwidth: the separation of frequencies B2 and B3 kHz at which
the relative attenuation first exceeds the specified minimum values A2
and A3(dB) respectively.

Ordering Information
Where possible, filters for a given application should be selected from the Standard Range, and ordered by quoting the appropriate filter type. If the application
is such that a custom filter is required, then our engineers are available to discuss the specification and to obtain the best compromise between performance
and the unavoidable cost of design and development.
Standard Filters:
Hy-Q International offer a range of standard filters which cover the most common applications.
These all fall into the following groups:
Channel Filters
Filters for VHF applications
Filters for HF applications
LC Filters
Full details of these are given in the individual data sheets.
Non-Standard Requirements:
The following is the minimum information required for the specification for a non-standard filter.
FILTER APPLICATION:

Low Pass__________ High Pass__________ Band Pass__________ SSB__________ Other__________

REFERANCE FREQUENCY (fo):

_____________________________________ kHz

PASS BANDWIDTH:

__________________ dB @ ____________________________ kHz

Ripple________________________ dB Max.

STOP BANDWIDTH(S):

Insertion Loss________________________ dB Max.

__________________ dB @ ____________________________ kHz

__________________ dB @ ____________________________ kHz

GUARANTEED ATTUATION:

__________________ dB @ ____________________________ kHz

SOURCE IMPEDANCE:

__________________ ohm // ____________________________ pF

LOAD IMPEDANCE:

__________________ ohm // ____________________________ pF

OPERATING TEMPERATURE RANGE:

PACKAGE STYLE:

__________________ C __________________ C

__________________ or SIZE L__________ W__________ H__________

Specifications subject to change without notice

Page 2 of 10

10 November 2000

Crystal Filters

Hy-Q

10.7 MHz Channel Filters

TYPE
12.5 kHz
CHANNEL
SPACING
QMF 10741

POLE

PASS
BANDWIDTH
dB @ kHz

STOP
BANDWIDTH
dB @ kHz
dB @ kHz

33.75

1812.5

1.0

2.0

QMF 10743

33.75

2018.0

0.5

1.5

QMF 10744

33.75

4014.0

1.0

2.5

QMF 10750

33.75

4014.0

1.0

2.5

QMF 10745
QMF 10742
QMF 10749
QMF 10718
QMF 10725
QMF 10726
QMF 10732
QMF 10758
QMF 10762
QMF 10767
QMF 10770
QMF 10739
20 kHz
CHANNEL
SPACING
QMF 10746

6
6
8
8
8
8
8
8
8
8
8
10

33.75
33.75
33.75
33.75
33.75
33.75
33.75
33.75
33.75
33.75
33.75
33.75

458.75
508.75
658.75
708.75
708.75
708.75
708.75
658.75
708.75
708.75
708.75
908.75

2.0
2.0
2.0
2.0
2.0
2.0
2.0
1.0
2.0
2.0
2.0
2.0

3.5
3.0
4.0
4.5
4.5
4.5
4.5
2.0
4.5
4.5
4.5
4.5

36.0

1820.0

1.0

2.0

QMF 10751

36.0

4020.0

1.0

2.5

QMF 10747
QMF 10738
QMF 10740
QMF 10748
25 kHz
CHANNEL
SPACING
QMF 10752A

6
8
8
8

36.0
36.0
36.0
36.0

5014.0
7014.0
7014.0
7014.0

2.0
2.0
2.0
2.0

3.0
3.5
3.5
3.5

37.5

1825.0

0.5

1.5

QMF 10752

37.5

1825.0

1.0

2.0

QMF 10771
QMF 10772

4
4

37.5
37.5

4025.0
4025.0

1.0
1.0

2.5
2.5

QMF 10766
QMF 10765
QMF 10753
QMF 10712
QMF10712A
QMF 10713
QMF 10716

4
6
6
8
8
8
8

310.0
311.5
37.5
37.5
67.5
37.5
67.5

3025.0
4525.0
5017.5
6517.5
6015.0
8022.5
8025.0

4535.0
6035.0
6525.0
9025.0
9025.0
9025.0

0.5
1.0
2.0
2.0
2.0
2.0
2.0

3.0
3.5
3.0
3.5
4.0
3.5
3.5

35+300 ~ +1000
40-200 ~ -1000
35+300 ~ +1000
40-200 ~ -1000
4025.0 ~ 300
65+300 ~ +1000
85-200 ~ -1000
4535.0 ~ 300
6035.0 ~ 300
6525.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
8025.0 ~ 300

QMF 10719
QMF 10729
QMF 10730
QMF 10735
QMF 10737
QMF 10757
QMF 10761
QMF 10736
34 kHz
CHANNEL
SPACING
QMF
10M20A
QMF
10M20B

8
8
8
8
8
8
8
10

37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5

7017.5
7017.5
7017.5
8022.5
7518.0
7017.5
8022.5
9017.5

9025.0
9025.0
9025.0
9025.0
9025.0
9025.0
9025.0

2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0

3.5
3.5
3.5
3.5
3.5
3.5
3.5
4.0

9025.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
9017.5 ~ 300

310.0

1834.0

0.5

1.5

310.0

4034.0

1.0

2.5

35+300 ~ +1000
40-200 ~ -1000
50+300 ~ +1000
70-200 ~ -1000

Specifications subject to change without notice

6512.5
6512.5
9012.5
9012.5
9012.5
9012.5
9012.5
9012.5
9012.5
9012.5
9012.5

6520.0
9020.0
9020.0
9020.0

RIPPLE
MAX
dB

LOSS
MAX
dB

ATTENUATION
GUARANTEED
dB @ (fokHz)

TERMINATING
IMPEDANCE
ohms / pF

TEMP
RANGE
C

PACKAGE

35+300 ~ +1000
35-300 ~ -1000
35+300 ~ +1000
35-300 ~ -1000
50+300 ~ +1000
70-200 ~ -1000
50+300 ~ +1000
70-200 ~ -1000
6512.5 ~ 300
6512.5 ~ 300
9012.5 ~ 300
9012.5 ~ 300
9012.5 ~ 300
9012.5 ~ 300
9012.5 ~ 300
9012.5 ~ 300
9012.5 ~ 300
9012.5 ~ 300
9012.5 ~ 300
908.75 ~ 300

3.3k / 2.5

-40 - +80

QC53

1.8k / 6.0

-20 - +70

QC59

1.8k / 5.0

-20 - +70

QC59 x2

3.0k / 2.0

-20 - +70

QC59 x2

1.8k / 5.0
3.3k / 2.5
1.8k / 5.0
910 / 25
910 / 25
3.3k / 2.5
470 / 25
3.3k / 2.5
820 / 10
910 / 25
3.3k / 2.5
3.3k / 2.5

-20 - +70
-40 - +80
-20 - +70
-40 - +80
-20 - +70
-20 - +70
-40 - +80
-20 - +70
-20 - +70
-20 - +70
-20 - +70
-20 - +70

QFP10
QFP10
QFP11
QFP7
QFP9
QFP11
QFP7
QFP11
QFP9
QFP9
QFP11
QFP12

35+300 ~ +1000
40-200 ~ -1000
50+300 ~ +1000
70-200 ~ -1000
6520.0 ~ 300
9020.0 ~ 300
9020.0 ~ 300
9020.0 ~ 300

3.3k / 2.0

-40 - +80

QC53

3.3k / 1.5

-20 - +70

QC59 x2

3.3k / 2.0
910 / 25
910 / 25
3.3k / 2.0

-20 - +70
-20 - +70
-20 - +70
-40 - +80

QFP10
QFP9
QFP7
QFP11

3.0K / 2.0

-20 - +70

QC59

3.3k / 1.5

-40 - +80

QC53

3.0k / 0
3.0k / 1.5

-40 - +80
-40 - +80

QC53 x2
QC53 x2

910 / 25
910 / 25
3.3k / 1.5
3.3k / 1.5
3.0k / 0
910 / 25
820 / 0(1)
820 / 25(0)
910 / 25
910 / 25
470 / 25
910 / 25
910 / 25
910 / 25
820 / 10
3.0k / 0

-40 - +80
-40 - +80
-40 - +80
-40 - +80
-20 - +70
-20 - +70
-20 - +70

QFP9
QFP9
QFP10
QFP11
QFP11
QFP9
QFP9

-40 - +80
-40 - +80
-40 - +80
-20 - +70
-40 - +80
-40 - +80
-20 - +70
-20 - +70

QFP7
QFP9
QFP7
QFP9
QFP7
QFP7
QFP9
QFP12

3.9k / 2.0

-20 - +70

QC59

3.9k / 2.0

-20 - +70

QC59 x2

Page 3 of 10

10 November 2000

Crystal Filters

Hy-Q

21.4 MHz Channel Filters

TYPE
12.5 kHz
CHANNEL
SPACING
QMF 21407

POLE

PASS
BANDWIDTH
dB @ kHz

STOP
BANDWIDTH
dB @ kHz
dB @ kHz

33.75

2018.0

0.5

1.5

QMF 21406

33.75

4014.0

1.0

2.5

QMF 21404
QMF 21405
QMF 21408
QMF 21409
QMF 21410
QMF 21411

6
8
6
8
8
2

33.75
33.75
33.75
33.75
33.75
33.75

458.75
659.0
458.75
659.0
659.0
2018.0

2.0
2.0
2.0
2.0
2.0
0.5

3.0
4.0
3.0
4.0
4.0
1.5

QMF 21412

33.75

4014.0

1.0

2.5

QMF 21413
QMF 21414
QMF 21415
QMF 21416
20 kHz
CHANNEL
SPACING
QMF 21430

6
8
6
8

33.75
33.75
33.75
33.75

458.75
659.0
458.75
659.0

2.0
2.0
2.0
2.0

3.0
4.0
3.0
4.0

36.0

2025.0

0.5

1.5

QMF 21431

36.0

4020.0

1.0

2.5

QMF 21436
QMF 21434
QMF 21432
QMF 21433
QMF 21435
25 kHz
CHANNEL
SPACING
QMF 21446

6
8
6
6
8

36.0
36.0
36.0
36.0
36.0

4514.0
6514.0
4514.0
4514.0
6514.0

2.0
2.0
2.0
2.0
2.0

2.5
3.0
2.5
2.5
3.0

37.5

1825.0

1.0

2.0

QMF 21446A

37.5

1825.0

0.5

1.5

QMF 21447

37.5

4025.0

1.0

2.0

QMF 21448

37.5

4025.0

1.0

2.0

QMF 21444A
QMF 21443
QMF 21444
QMF 21445A
QMF 21441
QMF 21442
QMF 21445
QMF 21449
34 kHz
CHANNEL
SPACING
QMF
21M20A
QMF
21M20B
QMF 21450
50 kHz
CHANNEL
SPACING
QMF
21M30A
QMF
21M30B

6
6
6
8
8
8
8
8

37.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5

4517.5
5017.5
5017.5
6517.5
7017.5
7017.5
7017.5
6015.5

2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0

2.5
3.0
3.0
3.0
3.5
3.5
3.5
4.0

310.0

1834.0

0.5

2.0

310.0

4034.0

1.0

2.5

311.0

7025.0

2.0

3.5

315.0

1545.0

0.5

1.5

315.0

4050.0

1.0

2.5

Specifications subject to change without notice

6512.5
9012.5
6512.5
9012.5
9012.5

6512.5
9012.5
6512.5
9012.5

6520.0
9020.0
6520.0
6520.0
9020.0

6525.0
6525.0
6525.0
9025.0
9025.0
9025.0
9025.0
8020.0

8035.0

RIPPLE
MAX
dB

LOSS
MAX
dB

ATTENUATION
GUARANTEED
dB @ (fokHz)

TERMINATING
IMPEDANCE
ohms / pF

TEMP
RANGE
C

PACKAGE

35+350 ~ +1000
50-200 ~ -1000
65+350 ~ +1000
80-200 ~ -1000
6512.5 ~ 300
9012.5 ~ 300
6512.5 ~ 300
9012.5 ~ 300
9012.5 ~ 300
35+350 ~ +1000
50-200 ~ -1000
65+350 ~ +1000
80-200 ~ -1000
6512.5 ~ 300
9012.5 ~ 300
6512.5 ~ 300
9012.5 ~ 300

850 / 8.0

-20 - +70

QC44

850 / 6.5

-20 - +70

QC44 x2

850 / 6.0
850 / 6.0
850 / 6.0
850 / 6.0
910 / 3.0
1.6k / 2.0

-20 - +70
-20 - +70
-20 - +70
-20 - +70
-20 - +70
-20 - +70

QFP22
QFP23
QFP10
QFP11
QFP11
QC44

1.6k / 2.0

-20 - +70

QC44 x2

1.6k / 3.0
1.6k / 2.0
1.6k / 3.0
1.6k / 2.0

-20 - +70
-20 - +70
-20 - +70
-20 - +70

QFP22
QFP23
QFP10
QFP11

35+350 ~ +1000
50-200 ~ -1000
65+350 ~ +1000
80-200 ~ -1000
6520.0 ~ 300
9020.0 ~ 300
6520.0 ~ 300
6520.0 ~ 300
9020.0 ~ 300

1.2k / 2.5

-20 - +70

QC44

1.2k / 2.5

-20 - +70

QC44 x2

1.2k /2.5
1.2k / 2.5
1.6k / 1.0
1.6k / 1.0
1.2k / 2.5

-20 - +70
-20 - +70
-20 - +70
-20 - +70
-20 - +70

QFP22
QFP23
QFP22
QFP10
QFP11

35+350 ~ +1000
50-200 ~ -1000
35+350 ~ +1000
50-200 ~ -1000
65+350 ~ +1000
80-200 ~ -1000
65+300 ~ +1000
85-200 ~ -1000
6525.0 ~ 300
6525.0 ~ 300
6525.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
9025.0 ~ 300
8020.0 ~ 300

1.6k / 2.0

-40 - +80

QC44

1.5k / 2.0

-20 - +70

QC44

1.5k / 2.0

-40 - +80

QC44 x2

1.5k / 2.0

-40 - +80

QC44 x2

1.5k / 2.0
1.6k / 2.0
1.6k / 2.0
1.5k / 2.0
910 / 15
1.6k / 2.0
1.6k / 2.0
1.0k / 1.0

-20 - +70
-40 - +80
-40 - +80
-20 - +70
-40 - +80
-40 - +80
-40 - +80
-20 - +70

QFP22
QFP10
QFP22
QFP23
QFP9
QFP11
QFP23
QFP11

35+350 ~ +1000
50-200 ~ -1000
65+350 ~ +1000
80-200 ~ -1000
8035.0 ~ 300

1.8k / 1.5

-20 - +70

QC44

1.8k / 1.5

-20 - +70

QC44 x2

1.6k / 2.0

-20 - +70

QFP11

35+350 ~ +1000
45-200 ~ -1000
65+350 ~ +1000
80-200 ~ -1000

3.0k / 0.5

-20 - +70

QC44

3.0k / 0.5

-20 - +70

QC44 x2

Page 4 of 10

10 November 2000

Crystal Filters

Hy-Q

16.9 MHz Channel Filters

TYPE
25 kHz
CHANNEL
SPACING
QMF
16M15A
QMF
16M15B

POLE

PASS
BANDWIDTH
dB @ kHz

STOP
BANDWIDTH
dB @ kHz
dB @ kHz

RIPPLE
MAX
dB

LOSS
MAX
dB

ATTENUATION
GUARANTEED
dB @ (fokHz)

TERMINATING
IMPEDANCE
ohms / pF

TEMP
RANGE
C

PACKAGE

37.5

1825.0

0.5

1.5

35+300 ~ +1000
40-200 ~ -1000
50+300 ~ +1000
70-200 ~ -1000

1.8k / 2.0

-20 - +70

QC59

37.5

4025.0

1.0

2.5

1.8k / 2.0

-20 - +70

QC59 x2

RIPPLE
MAX
dB

LOSS
MAX
dB

ATTENUATION
GUARANTEED
dB @ (fokHz)

TERMINATING
IMPEDANCE
ohms / pF

TEMP
RANGE
C

PACKAGE

40+500 ~ +1000
40-200 ~ -1000
40+500 ~ +1000
40-200 ~ -1000
35+500 ~ +1000
35-200 ~ -1000
70+500 ~ +1000
70-200 ~ -1000
70+500 ~ +1000
70-200 ~ -1000
70+500 ~ 1000
70-200 ~ -1000

650 / 4.5

-20 - +70

QC44

700 / 1.5

-20 - +70

QC44

800 / 3.0

-20 - +70

QC44

650 / 1.5

-20 - +70

QC44 x2

700 / 1.0

-20 - +70

QC44 x2

800 / 3.0

-20 - +70

QC44 x2

40+500 ~ +1000
40-200 ~ -1000
40+500 ~ +1000
40-200 ~ -1000
70+500 ~ +1000
70-200 ~ -1000
70+500 ~ +1000
70-200 ~ -1000

3.3k / 1.0

-20 - +70

QC44

5.5k / 1.0

-20 - +70

QC44

3.3k / 1.0

-20 - +70

QC44 x2

5.5k / 1.0

-20 - +70

QC44 x2

ATTENUATION
GUARANTEED
dB @ (fokHz)
35+500 ~ +1000
35-200 ~ -1000
35+500 ~ +1000
35-200 ~ -1000
70+500 ~ +1000
70-200 ~ -1000
70+500 ~ +1000
70-200 ~ -1000

TERMINATING
IMPEDANCE
ohms / pF
2.5k / 1.0

TEMP
RANGE
C
-20 - +70

PACKAGE
QC44

2.5k / 1.0

-20 - +70

QC44

2.5k / 1.0

-20 - +70

QC44 x2

2.5k / 1.0

-20+70

QC44 x2

ATTENUATION
GUARANTEED
dB @ (fokHz)
35+500 ~ +1000
35-200 ~ -1000
35+500 ~ +1000
35-200 ~ -1000
70+500 ~ +1000
70-200 ~ -1000
70+500 ~ +1000
70-200 ~ -1000

TERMINATING
IMPEDANCE
ohms / pF
1.5k / 1.0

TEMP
RANGE
C
-20 - +70

PACKAGE
QC44

1.5k / 1.0

-20 - +70

QC44

1.5k / 1.0

-20 - +70

QC44 x2

1.5k / 1.0

-20 - +70

QC44 x2

45.0 MHz Channel Filters

TYPE
POLE
FUNDAMENTAL
MODE
QMF
2
45F15A
QMF
2
45F20A
QMF
2
45F30A
QMF
4
45F15B
QMF
4
45F20B
QMF
4
45F30B
THIRD
OVERTONE
QMF
2
45M15A
QMF
2
45M20A
QMF
4
45M15B
QMF
4
45M20B

PASS
BANDWIDTH
dB @ kHz

STOP
BANDWIDTH
dB @ kHz
dB @ kHz

37.5

1525.0

1.0

2.0

310.0

1530.0

1.0

2.0

315.0

1550.0

1.0

2.0

37.5

3025.0

1.0

2.0

310.0

4048.0

1.0

3.0

315.0

4060.0

1.0

3.0

37.5

1530.0

1.0

2.0

310.0

1535.0

1.0

2.0

37.5

2525.0

1.0

3.0

310.0

3540.0

1.0

3.0

RIPPLE
MAX
dB
1.0

LOSS
MAX
dB
3.0

70.0 MHz Channel Filters

TYPE
QMF
70M15A
QMF
70M20A
QMF
70M15B
QMF
70M20B

POLE
2

PASS
BANDWIDTH
dB @ kHz
37.5

STOP
BANDWIDTH
dB @ kHz
dB @ kHz
1530.0

310.0

1530.0

1.0

2.0

37.5

2525.0

1.0

3.0

310.0

3540.0

1.0

3.0

RIPPLE
MAX
dB
1.0

LOSS
MAX
dB
2.0

90.0 MHz Channel Filters

TYPE
QMF
90M15A
QMF
90M20A
QMF
90M15B
QMF
90M20B

POLE
2

PASS
BANDWIDTH
dB @ kHz
37.5

STOP
BANDWIDTH
dB @ kHz
dB @ kHz
1530.0

310.0

1530.0

1.0

2.0

37.5

3538.0

1.0

3.0

310.0

3540.0

1.0

3.0

Specifications subject to change without notice

Page 5 of 10

10 November 2000

Crystal Filters

Hy-Q

Filters For HF, SSB & VHF Applications

APPLICATION

PASS
BANDWIDTH
dB @ kHz

RIPPLE
MAX
dB

LOSS
MAX
dB

CARRIER
REJECTION
dB MIN

TERMINATING
IMPEDANCE
ohms / pF

TEMP
RANGE
C

PACKAGE

60-3.4 ~ +.4

2.0

4.0

20

1k / 15

-15 to +55

QFP16

60-3.7 ~ +.4

2.0
2.0

4.0
4.0

20

1k / 15
1k / 15

-15 to +55
-15 to +55

QFP16
QFP16

602.0

2.0
2.0
2.0
2.0

4.0
6.0
6.0
4.0

1k / 15
1k / 15
1k / 15
1k / 15

-15 to +55
-15 to +55
-15 to +55
-15 to +55

QFP16
QFP16
QFP16
QFP16

601.2

2.0
2.0
2.0
2.0
2.0

5.0
5.0
5.0
6.0
4.0

50 / 0
50 / 0
50 / 0
1k / 15
1k / 15

-15 to +55
-15 to +55
-15 to +55
-15 to +55
-15 to +55

QFP16
QFP16
QFP16
QFP16
QFP16

1.0

5.0

1k / 15

-15 to +55

QFP16

3.0
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.0
3.0
2.0
2.0
2.0

4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
5.0
5.0
5.0
4.0
4.0

1k / 15
50 / 0
50 / 0
50 / 0
1k / 15
1k / 15
1k / 15
1k / 15
1k / 15
1k / 15
50 / 0
50 / 0
50 / 0
50 / 0
50 / 0

-15 to +55
-15 to +55
-15 to +55
-15 to +55
-15 to +70
-10 to +55
-10 to +55
-10 to +55
-10 to +55
-15 to +55
-10 to +80
-10 to +80
-10 to +60
-15 to +55
-15 to +55

QFP16
QFP16
QFP16
QFP16
QFP16
QFP16
QFP16
QFP16
QFP16
QFP16
QFP16
QFP16
QFP16
QFP16
QFP16

2.0
2.0

6.0
6.0

50 / 0
1k / 15

-15 to +55
-15 to +55

QFP16
QFP16

2.0

6.0

1k / 15

-15 to +55

QFP16

STOP
BANDWIDTH
dB @ kHz
dB @ kHz

TYPE
1.4 MHz
HF FILTERS
QF 01401

LSB

4-2.7 ~ -.35

QF 01403
QF 01405

CW
LSB

30.5
4+2.7 ~ -.35

QF 01406
QF 01408
QF 01409
QF 01410

USB
BP
AM
CW

4+.35 ~ +2.7
41.5
40.5
30.1

QF 01411
QF 01412
QF 01413
QF 01414
QF 01417

AM
AM
AM
AM
TELEX

30.15
30.3
30.75
30.2
3.125

QF 01418

TELEX

QF 01419
QF 01420
QF 01421
QF 01422
QF 01423
QF 01425
QF 01426
QF 01427
QF 01428
QF 01429
QF 01430
QF 01431
QF 01436
QF 01447
QF 01448

TELEX
LSB
USB
DSB
DSB
LSB
USB
LSB
LSB
LSB
CW
CW
LSB
USB
LSB

3.085
5.125
40.25
3-3.4 ~ -0.3
3+0.3 ~ +3.4
33.0
52.7
3-2.3 ~ -1.1
3+0.3 ~ +3.0
3-3.0 ~ -0.3
3-1.95 ~ -1.45
3-1.9 ~ -1.1
30.1
30.4
2-3.4 ~ -0.3
4+0.35 ~ +2.7
4-2.7 ~ -0.35

QF 01449
QF 01453

DSB
USB

32.7
6+0.35 ~ +2.7

QF 01456
1.65 MHz
HF FILTERS
QF 01601
QF 01602
QF 01606
QF 01607
QF 01608
QF 01609
QF 01610
QF 01612
5.0 MHz
SSB FILTERS
QF 05051
QF 05052
9.0 MHz
SSB FILTERS
QF 09002
QF 09006
12.7 MHz
SSB FILTERS
QMF 12701

LSB

4-2.7 ~ -0.35

20 0.0
40+0.15
603.50
20 0.0
40-3.5 ~ +0.15
60+3.7 ~ -0.4
303.5
602.0
160.2
301.0
600.4
600.75
601.9
600.5
60.2
300.5
60.17
300.38
301.0
50-5.0 ~ +0.3
50-0.3 ~ +5.0
6014.0
206.0
60-3.4 ~ +0.05
60-0.4 ~ +4.1
60-4.1 ~ +0.4
30-2.3 ~ -1.1
60-2.3 ~ -0.65
600.3
601.0
60-4.0 ~ +0.3
60-0.4 ~ +3.7
20 0.0
35+3.1
308.0
20+3.2
40+0.15 ~ +3.3
20-3.2

DSB
LSB
USB
LSB
USB
LSB
USB
LSB

63.0
6-2.8 ~ -0.3
6+0.3 ~ +2.8
6-3.1 ~ -0.3
6+0.3 ~ +3.0
6-3.0 ~ -0.3
6+0.3 ~ +3.1
6-2.6 ~ -0.3

6014.0
70-5.0 ~ +1.0
70-5.0 ~ +5.0
70-5.0 ~ +1.0
70+5.0 ~ +1.0
70+5.0 ~ +1.0
70-1.0 ~ +5.0
70-5.0 ~ +1.0

2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0

3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5

20
20
20
20
20
20
20

1k / 100
1k / 100
1k / 100
1k / 100
10k / 7.0
10k / 7.0
1k / 100
1k / 100

0 to +60
0 to +60
0 to +60
0 to +60
0 to +60
0 to +60
0 to +60
0 to +60

QFP3
QFP3
QFP3
QFP3
QFP3
QFP3
QFP3
QFP3

SSB
SSB

6 0 ~ -3.0
6 0 ~ +3.0

60-4.6 ~ +1.6
60-1.6 ~ +4.6

1.0
1.0

3.0
3.0

Ref Freq MHz

5.050
5.050

50 / 0
50 / 0

0 to +50
0 to +50

QFP7
QFP7

SSB
SSB

61.2
67.5

802.15
8016.5

2.0
2.0

3.5
3.5

Ref Freq MHz

9.000
9.000

500 / 30
1.2k / 30

0 to +50
0 to +50

QFP7
QFP7

LSB

6-3.0 ~ -0.5

2.0

5.0

Ref Freq MHz

12.700

QFP27

6+0.5 ~ +3.0

2.0

5.0

12.700

200 / 7(1)
3k / 7(0)
200 / 7(1)
3k / 7(1)

-30 to +60

USB

26-3.75
60-4.75 ~ +1.3
26+3.75
60-1.3 ~ +4.75

-30 to +60

QFP27

AM/FM
25 kHz

33.5

2512.0

1.0

3.0

Ref Freq MHz

35.3965

50 / 0

0 to +50

QFP9

AM/FM
25 kHz
AM/FM
50 kHz

32.7

206.0
6010.0
3010.0

6611.0

2.0

4.0

Ref Freq MHz

45.000

50 / 0

-15 to +55

QFP25

6017.5

2.0

4.0

45.000

50 / 0

-15 to +55

QFP25

QMF 12702
35.0 MHz
VHF FILTERS
QF 35401
45.0 MHz
VHF FILTERS
QF 45001
QF 45002

34.0

Specifications subject to change without notice

606.0

600.5
660.55
602.0
60-7.0 ~ +0.45
60-0.45 ~ +7.0
6012.0
30-2.9 ~ -0.5

60-2.7 ~ -0.7

400.15
60-3.4 ~ +0.4
6010.0
60+0.5 ~ +3.4
60-3.4 ~ +0.4

802.65

Page 6 of 10

20

20

10 July 2001

Filter Packages

Hy-Q

QC53

QC44
11.050.2

7.80.2
3.10.2

4.650.2

6.80.2

2.250.2

10.010.2

3.610.2

8.00.2
11.70.2
0.80.1
12.70.2
0.80.1
12.70.2
0.350.05 TYP.
3.750.2

0.450.05 TYP.
4.880.2

QC59

TYPICAL 4 POLE
CONNECTION

11.050.2

COLOURED
DOT

4.650.2

3.610.2

10.010.2

13.460.2

0.80.1
12.70.2

Rt // Ct

Rt // Ct
Cc

0.450.05 TYP.
4.880.2

PAGE 07 of 10

01 JUN 1999

ALL DIMENSIONS AND TOLERANCES ARE IN mm

SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE

Filter Packages

Hy-Q

QFP7

QFP3
64.00.2

40.00.2
36.00.2

28.00.2

26.70.2
5.00.2

19.00.2
8.00.2

9.50.2
53.40.2
5.30.2

2 M3x0.5
MOUNTING STUDS

2 PINS
0.800.05

2 M3x0.5
MOUNTING STUDS

7.60.2

15.20.2

17.80.2
11.10.2
6.60.2
18.00.2
28.00.2

7.60.2 TYP.

QFP26

QFP25
60.70.2

26.60.2

5.750.2

4 PINS
1.00.1 TYP.

25.60.2

49.20.2

25.60.2

6.30.2

18.00.2

6.30.2

49.20.2

2 PINS
0.800.05

5.750.2

60.70.2

2 PINS
0.800.05

5.750.2

14.30.2

14.30.2

5.650.2

2 M3x0.5
MOUNTING STUDS

5.650.2

2 M3x0.5
MOUNTING STUDS

QFP16/24

26.00.2

76.00.2

MOUNTING STUD DETAILS

29.20.2
6.30.2

50.80.2

PACKAGE

MOUNTING STUD
SIZE

QFP16

M3.0x0.5

QFP24

M4.0x0.7

7.60.2

2 PINS 0.700.05
7.60.2

5.00.2
66.00.2

PAGE 08 of 10

01 JUN 1999

5.40.2

ALL DIMENSIONS AND TOLERANCES ARE IN mm

2 MOUNTING STUDS
REFER TABLE FOR DETAILS

SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE

Filter Packages

Hy-Q

QFP10
15.00.2

QFP11
12.00.2

18.50.2

15.00.2

12.00.2

15.00.2

4.00.2

7.00.2

4.00.2

7.00.2

1.50.2
9.00.2

1.50.2
4 LEADS
0.500.05

2.50.2

13.40.2

2.50.2

2.50.2

4 LEADS
0.500.05

2.50.2

QFP12
23.00.2

QFP22
12.00.2
11.00.2

15.00.2

8.50.2

11.50.2
4.00.2

7.00.2

4.00.2

7.00.2

1.50.2
17.80.2

1.50.2
4 LEADS
0.500.05

2.50.2

7.50.2

2.00.2

4 LEADS
0.500.05

2.00.2

2.50.2

QFP23
13.50.2

8.50.2

11.50.2
4.00.2

7.00.2

1.50.2
9.80.2

2.00.2

4 LEADS
0.500.05

2.00.2

PAGE 09 of 10

01 JUN 1999

ALL DIMENSIONS AND TOLERANCES ARE IN mm

SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE

Filter Packages

Hy-Q

QFP9

QFP30

38.50.2

38.50.2

18.20.2

16.00.2

18.20.2

22.90.2

3.50.2
6 PINS
0.500.05

3.50.2

32.00.2
4.00.2 TYP.

6 PINS
0.500.05

32.00.2
4.00.2 TYP.

4.00.2
3.250.2

3.250.2

4.00.2

4.00.2

4.00.2

QFP31
150.10.2

59.80.2

27.70.2

7.90.2

8.70.2

136.50.2
2 PINS 0.800.05

68.250.2
6.80.2

6 4BA MOUNTING STUDS

44.40.2

7.90.2
7.70.2

PAGE 10 of 10

01 JUN 1999

ALL DIMENSIONS AND TOLERANCES ARE IN mm

SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE