Detcon Product Guide

February 9, 2010

888-367-4286 713-559-9200 Fax: 281-292-2860 P.O.Box 8067 The Woodlands, Texas

www.detcon.com
[email protected]

Page 1

Detcon Product Guide

Table of Contents
Section
1
1.1 1.2 1.3 1.4 1.5 1.6 1.7

Description
Gas Detection Sensors
Model Series 700 Gas Detection Sensor Assemblies Model Series 600 MicroSafe Gas Detection Sensor Assemblies Model Series 500 MicroSafe Gas Detection Sensor Assemblies Model Series 400 Gas Detection Sensor Assemblies Model Series 200 UniTox Gas Detection Sensor Assemblies Detcon Sample Draw Manifold Assemblies Fire Detection Sensor Assemblies

Page
3 3 8 14 19 22 25 26 27 27 29 31 33 34 35 36 37 38 40 41 45

2
2.1 2.2 2.3 2.4 2.5 2.6

Gas Detection Control Systems

Model Series 10 Single Control Card Gas Detection Control Systems Model Series 12 Single Control Card Gas Detection Control Systems Model Series X40 Multi-Channel Gas Detection Control Systems Model Series 1600 Multi-Channel Gas Detection Control Systems Model 880A/S PLC Graphic Gas Detection Control Systems Remote Displays

3 4 5 6 7 8

Gas Detection System Accessory Circuits Power Supplies and Stand-by Battery Systems Gas Detection Calibration Kits and Span Gas Cylinders Special Application Products Process Gas Analyzers Audio Visual Alarm Stations

Page 2

Detcon Product Guide

Section 1.0 Gas Detection Sensor Assemblies
Section 1.1 Model Series 700 Gas Detection Sensors (Does not include junction box.
See section 1.1.7 for junction box adder instructions.)

1.1.1 Combustible Gas Detection Sensor Assemblies

Part Number
967-525520-100 967-215520-100

Model Number - Description

FP-700 Catalytic Combustible Gas Sensor Assembly IR-700-CH Infrared Combustible Hydrocarbon Sensor Assembly

1.1.2 Hydrogen Sulfide Gas Detection Sensor Assemblies

Part Number
967-015520-100 967-242490-100

Model Number - Description

TP-700 Solid State MOS H2S Sensor Assembly DM-700-H2S Electro Chemical H2S Sensor Assembly

1.1.3 Oxygen Gas Detection Sensor Assemblies

Part Number
967-345520-025

Model Number - Description

DM-700-O2 Oxygen Deficiency Sensor Assembly

1.1.4 VOC Gas Detection Sensor Assemblies

Part Number
967-P15520-010 967-P25520-01K

Model Number - Description

PI-700-VOC Volatile Organic Compound Sensor Assembly PI-701-VOC Volatile Organic Compound Sensor Assembly

1.1.5 Carbon Dioxide Gas Detection Sensor Assemblies

Part Number
967-405520-005 967-425520-025

Model Number - Description

IR-700-CO2 Infrared Sensor Assembly - Low Range (0-5%) IR-700-CO2 Infrared Sensor Assembly - High Range (10-100%)

1.1.6 Electrochemical Toxic Gas Detection Sensor Assemblies

Standard Range is indicated by the last 3 digits of the part number. Contact the Detcon factory for other ranges.

Part Number
967-12EA90-100 967-12EG90-100 967-12EM90-100 967-505090-100 967-191990-001 967-747590-005 967-12EB90-100 967-444490-100 967-747490-010 967-777790-001 967-747690-050 967-192190-005 967-12EO90-100 967-24EZ90-100 967-12ED90-100 967-12EJ90-100 967-272790-001 967-12EP90-100

Model Number - Description

DM-700-C2H3O Acetyldehyde Sensor Assembly DM-700-C2H2 Acetylene Sensor Assembly DM-700-C3H3N Acrylonitrile Sensor Assembly DM-702-NH3 Ammonia Sensor Assembly DM-700-AsH3 Arsine Sensor Assembly DM-700-Br2 Bromine Sensor Assembly DM-700-C4H6 Butadiene Sensor Assembly DM-700-CO Carbon Monoxide Sensor Assembly DM-700-CL2 Chlorine Sensor Assembly DM-701-CLO2 Chlorine Dioxide Sensor Assembly (0-1ppm) DM-700-CLO2 Chlorine Dioxide Sensor Assembly (0-50ppm) DM-700-B2H6 Diborane Sensor Assembly DM-700-C2H5OH Ethanol Sensor Assembly DM-700-C2H5SH Ethyl Mercaptans Sensor Assembly DM-700-C2H4 Ethylene Sensor Assembly DM-700-C2H4O Ethylene Oxide Sensor Assembly DM-700-F2 Fluorine Sensor Assembly DM-700-CH2O Formaldehyde Sensor Assembly

Page 3

Detcon Product Guide

967-232590-002 967-262690-001 967-848490-100 967-050590-04P 967-070790-01P 967-090890-030 967-090990-030 967-131390-030 967-333390-010 967-242490-100 967-12EE90-100 967-24EK90-100 967-949490-100 967-646490-010 967-393990-001 967-414190-001 967-192090-005 967-232390-050 967-555590-020 967-12EF90-100 967-12EL90-100 DM-700-GeH4 Germane Sensor Assembly DM-700-N2H4 Hydrazine Sensor Assembly DM-700-H2 Hydrogen Sensor Assembly (ppm Range) DM-701-H2 Hydrogen Sensor Assembly (4% Range) DM-702-H2 Hydrogen Sensor Assembly (1% Range) DM-700-HBr Hydrogen Bromide Sensor Assembly DM-700-HCL Hydrogen Chloride Sensor Assembly DM-700-HCN Hydrogen Cyanide Sensor Assembly DM-700-HF Hydrogen Fluoride Sensor Assembly DM-700-H2S Hydrogen Sulfide Sensor Assembly DM-700-CH3OH Methanol Sensor Assembly DM-700-CH3SH Methyl Mercaptans Sensor Assembly DM-700-NO Nitric Oxide Sensor Assembly DM-700-NO2 Nitrogen Dioxide Sensor Assembly DM-700-O3 Ozone Sensor Assembly DM-700-COCL2 Phosgene Sensor Assembly DM-700-PH3 Phosphine Sensor Assembly DM-700-SiH4 Silane Sensor Assembly DM-700-SO2 Sulfur Dioxide Sensor Assembly DM-700-C4H6O2 Vinyl Acetate Sensor Assembly DM-700-C2H3CL Vinyl Chloride Sensor Assembly

1.1.7 Model Series 700 Junction Box Adder

To order a model 700 gas detection sensor with a junction box, modify the part number of the sensor(s) you want according to the instructions below.

Catalytic Combustible, Solid State H2S, Oxygen, VOC, & CO2

With aluminum junction box, indicate a "1" in position 6 of the PN (xxx-xx1xxx-xxx) With stainless steel junction box (ATEX Pending), indicate a "4" in position 6 of the PN (xxx-xx4xxx-xxx)

Electrochemical: NOTE: Detcon recommends selection of the 316SS J-box for strong acid gas compounds (HCl, Cl2, Br2, F2, HBr, HF)
With aluminum junction box, indicate a "1" in position 9 of the PN (xxx-xxxxx1-xxx) With stainless steel junction box (ATEX Pending), indicate a "4" in position 9 of the PN (xxx-xxxxx4-xxx)

Page 4

Detcon Product Guide

1.1.8 Model Series 700 Integration Modules
Part Number
975-70000A-00A 975-70000A-00S 975-70000H-00A 975-70000H-00S 975-70000P-00A 975-70000P-00S 975-70000F-00A 975-70000F-00S 975-70000W-00A 975-70000W-00S

Model Number - Description

Remote Control / Alarm Relay Module in Aluminum Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2 Remote Control / Alarm Relay Module in 316SS Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2 Hart Integration Module in Aluminum Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2 Hart Integration Module in 316SS Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2 Profibus Integration Module in Aluminum Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2 Profibus Integration Module in 316SS Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2 Foundation Fieldbus Integration Module in Aluminum Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2 Foundation Fieldbus Module in 316SS Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2 Wireless Integration Module in Aluminum Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2 Wireless Integration Module in 316SS Enclosure Class 1; Div 1; Groups B, C, D Zone I Group IIB+H2

1.1.9 Model Series 700 Spare Parts - Universal

Part Number
613-120000-700 327-000000-000 975-000020-893 960-202200-000 500-003087-100 437-500000-000 943-004223-000 943-004241-000 897-850000-000 897-850500-000 897-850000-316 897-850901-316 943-002273-000 943-003436-000 943-000000-000

Model Number - Description

Sensor splash guard with integral cal-port Magnetic programming tool Sensor duct mount kit 700 Series Condensation prevention packet (for J-Box replace annually) Transient Protection Module Stainless steel tag 2" pipe mount with sun shade 2" pipe mount (flat) Aluminum junction box with solid cover Aluminum junction box with lens cover Stainless steel junction box with solid cover Stainless steel junction box with lens cover Hazardous location dust guard (fits 1.5 x 18 thread) Hazardous location water guard Calibration Sleeve/Wind Guard for use with splash guard

1.1.10 Spare Parts - FP-700 Catalytic Combustible Gas Sensor Assembly

Part Number
927-525500-100 602-003152-000 370-201600-700

Model Number - Description

FP-700 Catalytic Combustible Gas (ITM) Bottom housing assembly for FP/TP/IR - includes flame arrestor Combustible Gas plug-in sensor for FP-700

Page 5

Detcon Product Guide

1.1.11 Spare Parts - IR-700-CH Infrared Combustible Hydrocarbon Sensor Assembly
Part Number
927-215500-100 602-003152-000 370-3658CH-700

Model Number - Description

IR-700-CH Infrared Combustible Hydrocarbon (ITM) Bottom housing assembly for FP/TP/IR - includes flame arrestor Combustible Hydrocarbon plug-in sensor for IR-700-CH

1.1.12 Spare Parts - TP-700 Solid State MOS H2S Sensor Assembly
Part Number
927-015500-100 602-003152-000 370-010000-700

Model Number - Description

TP-700 Solid State MOS H2S (ITM) Bottom housing assembly for FP/TP/IR - includes flame arrestor Solid State MOS H2S plug-in sensor for TP-700

1.1.13 Spare Parts - DM-700-H2S Electro Chemical H2S Sensor Assembly

Part Number
927-245500-000 600-003215-000 377-242400-100

Model Number - Description

DM-700-EC Electro Chemical Universal ITM Splash guard adapter for DM/O2/PI Hydrogen Sulfide plug-in sensor for DM-700-H2S czx

1.1.14 Spare Parts - DM-700-O2 Oxygen Deficiency Sensor Assembly

Part Number
927-345500-025 600-003215-000 377-343400-025

Model Number - Description

DM-700-O2 Oxygen Deficiency (ITM) Splash guard adapter for DM/O2/PI Oxygen plug-in sensor for DM-700-O2

1.1.15 Spare Parts - PI-700-VOC Volatile Organic Compound Sensor Assembly

Part Number
927-P25500-000 600-003215-000 377-P10000-010 377-P20000-01K

Model Number - Description

PI-700 Volatile Organic Compound (ITM) Universal Splash guard adapter for DM/O2/PI Photo Ionization plug-in sensor for PI-700-10 (0-10ppm) Photo Ionization plug-in sensor for PI-701-1K (0-1000ppm)

1.1.16 Spare Parts - IR-700-CO2 Infrared Sensor Assembly

Part Number
927-405500-000 927-425500-000 602-003152-000 370-365878-700 370-287724-700

Model Number - Description

IR-700-CO2 Infrared Carbon Dioxide (ITM) Low Range (0-5%) IR-700-CO2 Infrared Carbon Dioxide (ITM) High Range (10-100%) Bottom housing assembly for FP/TP/IR - includes flame arrestor Carbon Dioxide plug-in sensor for IR-700-CO2 (0-5%) Carbon Dioxide plug-in sensor for IR-700-CO2 (10-100%)

Page 6

Detcon Product Guide

1.1.17 Spare Parts - DM-700 Electrochemical Toxic Gas Sensor Assemblies
Part Number
927-245500-000 600-003215-000 377-12EA00-100 377-12EG00-100 377-12EM00-100 377-505000-100 377-191900-001 377-747500-005 377-12EB00-100 377-444400-100 377-747400-010 377-777700-001 377-747600-050 377-192100-005 377-12EO00-100 377-24EZ00-100 377-12ED00-100 377-12EJ00-100 377-272700-001 377-12EP00-100 377-232500-002 377-262600-001 377-848400-100 377-050500-04P 377-090800-030 377-090900-030 377-131300-030 377-333300-010 377-242400-100 377-12EE00-100 377-12EK00-100 377-949400-100 377-646400-010 377-393900-001 377-414100-001 377-192000-005 377-232300-050 377-555500-020 377-12EF00-100 377-12EL00-100

Model Number - Description

DM-700-EC Electro Chemical Universal ITM Splash guard adapter for DM/O2/PI Acetyldehyde plug-in sensor for DM-700-C2H3O Acetylene plug-in sensor for DM-700-C2H2 Acrylonitrile plug-in sensor for DM-700-C3H3N Ammonia plug-in sensor for DM-702-NH3 Arsine plug-in sensor for DM-700-AsH3 Bromine plug-in sensor for DM-700-Br2 Butadiene plug-in sensor for DM-700-C4H6 Carbon Monoxide plug-in sensor for DM-700-CO Chlorine plug-in sensor for DM-700-CL2 Chlorine Dioxide plug-in sensor for DM-700-CLO2 (0-1ppm) Chlorine Dioxide plug-in sensor for DM-700-CLO2 (0-50ppm) Diborane plug-in sensor for DM-700-B2H6 Ethanol plug-in sensor for DM-700-C2H5OH Ethyl Mercaptan plug-in sensor for DM-700-C2H5SH Ethylene plug-in sensor for DM-700-C2H4 Ethylene Oxide plug-in sensor for DM-700-C2H4O Fluorine plug-in sensor for DM-700-F2 Formaldehyde plug-in sensor for DM-700-CH2O Germane plug-in sensor for DM-700-GeH4 Hydrazine plug-in sensor for DM-700-N2H4 Hydrogen plug-in sensor for DM-700-H2 (ppm range) Hydrogen plug-in sensor for DM-700-H2 (1% & 4% range) Hydrogen Bromide plug-in sensor for DM-700-HBr Hydrogen Chloride plug-in sensor for DM-700-HCL Hydrogen Cyanide plug-in sensor for DM-700-HCN Hydrogen Fluoride plug-in sensor for DM-700-HF Hydrogen Sulfide plug-in sensor for DM-700-H2S Methanol plug-in sensor for DM-700-CH3OH Methyl Mercaptan plug-in sensor for DM-700-CH3SH Nitric Oxide plug-in sensor for DM-700-NO Nitrogen Dioxide plug-in sensor for DM-700-NO2 Ozone plug-in sensor for DM-700-O3 Phosgene plug-in sensor for DM-700-COCL2 Phosphine plug-in sensor for DM-700-PH3 Silane plug-in sensor for DM-700-SiH4 Sulfur Dioxide plug-in sensor for DM-700-SO2 Vinyl Acetate plug-in sensor for DM-700-C4H6O2 Vinyl Chloride plug-in sensor for DM-700-C2H3CL

Page 7

Detcon Product Guide

Section 1.2 Model Series 600 MicroSafe Gas Detection Sensors
1.2.1 Combustible Gas Detection Sensor Assemblies
Part Number
966-524520-100 966-224520-100

Model Number - Description

FP-624C Catalytic Combustible Gas Sensor Assembly IR-622 Infrared Combustible Hydrocarbon Sensor Assembly

Standard range for IR combustible hydrocarbon is 100% LEL. Contact the Detcon factory for other ranges.

1.2.2 Hydrogen Sulfide Gas Detection Sensor Assemblies

Part Number
966-014520-100 966-01452B-100 966-242480-100

Model Number - Description

TP-624C Solid State MOS H2S Sensor Assembly TP-624C-316SS Solid State MOS H2S Sensor Assembly DM-600IS-H2S Sensor Assembly

1.2.3 Oxygen Gas Detection Sensor Assemblies

Part Number
966-344520-025

Model Number - Description

DM-634 Oxygen Gas Sensor Assembly

1.2.4 VOC Gas Detection Sensor Assemblies

Part Number
966-P14520-010 966-P24520-01K

Model Number - Description

PI-600-VOC Sensor Assembly 0-10 PPM PI-601-VOC Sensor Assembly 0-1000 PPM

1.2.5 Carbon Dioxide Gas Detection Sensor Assemblies

Part Number
966-404520-005 966-424520-100

Model Number - Description

IR-640 Infrared Carbon Dioxide Sensor Assembly (range 0-5%) IR-642 Infrared Carbon Dioxide Sensor Assembly (range 10-100%)

Contact the Detcon factory for other ranges.

1.2.6 Electrochemical Toxic Gas Detection Sensor Assemblies

Standard Range is indicated by the last 3 digits of the part number. Contact the Detcon factory for other ranges. Note: Detcon recommends selection of the 316SS J-box for strong acid gas compounds (HCl, Cl2, Br2, F2, HBr, HF)

Part Number
966-12EA80-100 966-12EG80-100 966-12EM80-100 966-505080-100 966-191980-001 966-747580-005 966-12EB80-100 966-444480-100 966-747480-010 966-777780-001 966-747680-050 966-192180-005 966-12EO80-100 966-24EZ80-100 966-12ED80-100 966-12EJ80-100 966-272780-001 966-12EP80-100

Model Number - Description

DM-600IS-C2H3O Acetyldehyde Sensor Assembly DM-600IS-C2H2 Acetylene Sensor Assembly DM-600IS-C3H3N Acrylonitrile Sensor Assembly DM-602IS-NH3 Ammonia Sensor Assembly DM-600IS-AsH3 Arsine Sensor Assembly DM-600IS-Br2 Bromine Sensor Assembly DM-600IS-C4H6 Butadiene Sensor Assembly DM-600IS-CO Carbon Monoxide Sensor Assembly DM-600IS-CL2 Chlorine Sensor Assembly DM-601IS-CLO2 Chlorine Dioxide Sensor Assembly (0-1ppm) DM-600IS-CLO2 Chlorine Dioxide Sensor Assembly (0-50ppm) DM-600IS-B2H6 Diborane Sensor Assembly DM-600IS-C2H5OH Ethanol Sensor Assembly DM-600IS-C2H5SH Ethyl Mercaptans Sensor Assembly DM-600IS-C2H4 Ethylene Sensor Assembly DM-600IS-C2H4O Ethylene Oxide Sensor Assembly DM-600IS-F2 Fluorine Sensor Assembly DM-600IS-CH2O Formaldehyde Sensor Assembly

Page 8

Detcon Product Guide

966-232580-002 966-262680-001 966-848480-100 966-050580-04P 966-070780-01P 966-090880-030 966-090980-030 966-131380-030 966-333380-010 966-242480-100 966-12EE80-100 966-24EK80-100 966-949480-100 966-646480-010 966-393980-001 966-414180-001 966-192080-005 966-232380-050 966-555580-020 966-12EF80-100 966-12EL80-100 DM-600IS-GeH4 Germane Sensor Assembly DM-600IS-N2H4 Hydrazine Sensor Assembly DM-600IS-H2 Hydrogen Sensor Assembly (ppm Range) DM-601IS-H2 Hydrogen Sensor Assembly (% Range) DM-602IS-H2 Hydrogen Sensor Assembly (1% Range) DM-600IS-HBr Hydrogen Bromide Sensor Assembly DM-600IS-HCL Hydrogen Chloride Sensor Assembly DM-600IS-HCN Hydrogen Cyanide Sensor Assembly DM-600IS-HF Hydrogen Fluoride Sensor Assembly DM-600IS-H2S Hydrogen Sulfide Sensor Assembly DM-600IS-CH3OH Methanol Sensor Assembly DM-600IS-CH3SH Methyl Mercaptans Sensor Assembly DM-600IS-NO Nitric Oxide Sensor Assembly DM-600IS-NO2 Nitrogen Dioxide Sensor Assembly DM-600IS-O3 Ozone Sensor Assembly DM-600IS-COCL2 Phosgene Sensor Assembly DM-600IS-PH3 Phosphine Sensor Assembly DM-600IS-SiH4 Silane Sensor Assembly DM-600IS-SO2 Sulfur Dioxide Sensor Assembly DM-600IS-C4H6O2 Vinyl Acetate Sensor Assembly DM-600IS-C2H3CL Vinyl Chloride Sensor Assembly

1.2.7 Model Series 600 Spare Parts - Universal

Part Number
327-000000-000 960-202200-000 437-500000-000 943-004223-000 943-004241-000 975-225007-006 975-316007-006 897-850000-010 897-850901-010 897-850000-316 897-850901-316 943-003436-000 943-000000-000

Model Number - Description

Magnetic programming tool Condensation prevention packet (for J-Box replace annually) Stainless steel tag 2" pipe mount with sun shade 2" pipe mount (flat) Remote sensor Jbox, aluminum, 6 wire terminal strip Remote sensor Jbox, 316 stainless steel, 6 wire terminal strip Standard aluminum junction box with solid lid Standard aluminum junction box with lens cover Standard 316SS junction box with solid lid Standard 316SS junction box with lens cover Hazardous location water guard Calibration Sleeve/Wind Guard for use with splash guard

1.2.8 Spare Parts - FP-624C Catalytic Combustible Gas Sensor Assembly

Part Number
370-201600-000 926-525500-100 500-001794-004 612-820000-000 399-602016-000 613-120000-700 943-000006-132 975-RSFP00-624 975-000020-890 600-002983-A01 612-400000-000 943-002273-000

Model Number - Description

Combustible gas field replaceable plug-in sensor Plug-in transmitter module (Model FP-624C) Standard connector board Model series 600 sensors Stainless steel LEL sensor housing with threaded insert Stainless steel LEL sensor housings including plug-in sensor Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 FP-624 remote sensor separation kit Sensor Duct Mount Kit LEL Calibration adapter for splashguard Sensor/Sintered Filter replacement wrench FP/DM/IR Hazardous location dust guard (fits 1.5 x 18 thread)

Page 9

Detcon Product Guide

1.2.9 Spare Parts - IR-622-CH Infrared Combustible Hydrocarbon Sensor Assembly
Part Number
370-365871-212 926-225500-100 500-002042-000 390-000087-000 613-120000-700 943-000006-132 975-RSIR00-622 975-000208-9IR 600-002983-A01 612-400000-000

Model Number - Description

Combustible Hydrocarbon plug-in optical sensor for CHs Plug-in transmitter control module (Model IR-622) Standard connector board Model series 600 IR sensors Stainless steel sensor housing assembly CHs Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 IR-622 remote sensor separation kit Sensor Duct Mount Kit IR Calibration adapter for splashguard Sensor/Sintered Filter replacement wrench FP/DM/IR

1.2.10 Spare Parts - TP-624C Solid State MOS H2S Sensor Assembly
Part Number
399-800000-000 926-015500-100 500-001794-004 600-610000-000 943-000006-038 326-000000-000 975-RSTP00-624 975-000020-891 600-002983-A01 943-002274-000

Model Number - Description

Solid State MOS H2S Sensor in Stainless Steel Housing Plug-in transmitter control module (Model TP-624) Standard connector board Model series 600 sensors Sensor splash guard w/integral cal port TP-424/TP-524/TP-624 Calibration adapter TP Replaceable sintered stainless steel flame arrestor TP-624 remote sensor separation kit Sensor Duct Mount Kit TP Calibration adapter for splashguard Hazardous location dust guard (fits 7/8 x 14 thread)

1.2.11 Spare Parts - DM-600-H2S Electro Chemical H2S Sensor Assembly

Part Number
394-242400-xxx* 926-995580-000 500-001794-004 613-002646-000 975-RSDM00-600 975-000020-892 370-242400-000 943-002273-000

Model Number - Description

Intrinsically Safe sensor housing w/preamp circuit *Specify range Universal plug-in transmitter control module (DM-600IS) Standard connector board Model series 600 sensors Sensor splash guard with twist lock adapter DM-600 remote sensor separation kit Sensor Duct Mount Kit DM Series Hydrogen Sulfide plug-in detector assembly Hazardous location dust guard (fits 1.5 x 18 thread)

1.2.12 Spare Parts - DM-600-O2 Oxygen Deficiency Sensor Assembly

Part Number
370-399100-000 926-345500-025 500-001794-004 399-200000-000 613-120000-700 943-000006-132 330-X50000-000 975-RSDM00-634 975-000020-892 612-400000-000

Model Number - Description

Oxygen field replaceable plug-in sensor 400/500/600 series Plug-in transmitter control module (Model DM-634) Standard connector board Model series 600 sensors Stainless steel sensor housing with insert and flame arrestor Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 Field Replaceable sintered stainless steel flame arrestor DM-634 remote sensor separation kit Sensor Duct Mount Kit DM Series Sensor/Sintered Filter replacement wrench FP/DM/IR

Page 10

Detcon Product Guide

1.2.13 Spare Parts - PI-600-VOC Volatile Organic Compound Sensor Assembly
Part Number
370-P10000-000 370-P20000-000 926-P16480-010 500-001794-004 390-404142-010 390-404142-01K 613-120000-700 943-000006-132 330-X50000-000 975-600020-000 975-600100-000 975-520040-000 975-RSPI00-600 975-000208-9IR 943-002273-000

Model Number - Description

Photo Ionization field replaceable plug-in detector 0-10 PPM Photo Ionization field replaceable plug-in detector 0-1000 PPM Plug-in transmitter control module (Model PI-600/PI-601) Standard connector board Model series 600 sensors PID sensor housing assembly 10 ppm PID sensor housing assembly 1000 ppm Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 Field replaceable sintered stainless steel flame arrestor PID 10.6eV replacement lamp PID detector replacement cell PID lamp cleaning kit PI-600 remote sensor separation kit Sensor Duct Mount Kit IR Hazardous location dust guard (fits 1.5 x 18 thread)

1.2.14 Spare Parts - IR-640-CO2 Infrared Sensor Assembly

Part Number
370-365878-111 370-287724-232 926-405500-003 500-002042-000 390-000088-000 613-120000-700 943-000006-132 330-X50000-000 975-RSIR00-640 975-000208-9IR 600-002983-A01 612-400000-000 943-002273-000

Model Number - Description

Carbon Dioxide plug-in optical sensor (up to 5% range) Carbon Dioxide plug-in optical sensor (10 to 100% range) Plug-in transmitter control module (Model IR-640) Standard connector board Model series 600 IR sensors Stainless steel sensor housing assembly CO2 Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 Field replaceable sintered stainless steel flame arrestor IR-640 remote sensor separation kit Sensor Duct Mount Kit IR Calibration adapter for splashguard Sensor/Sintered Filter replacement wrench FP/DM/IR Hazardous location dust guard (fits 1.5 x 18 thread)

Page 11

Detcon Product Guide

1.2.15 Spare Parts - DM-600 Electrochemical Toxic Gas Sensor Assemblies
Part Number
926-995580-000 500-001794-004 394-xxxx00-xxx* 613-002646-000 975-RSDM00-600 975-000020-892 943-002273-000

Model Number - Description

Universal plug-in transmitter control module (DM-600IS) Standard connector board Model series 600 sensors Intrinsically Safe sensor housing with pre-preamp circuit *Specify gas type and range Sensor splash guard with twist lock adapter DM-600 remote sensor separation kit Sensor Duct Mount Kit DM Series Hazardous location dust guard (fits 1.5 x 18 thread)

* To specify gas type (digits 4 through 7 of the part number) refer to section 1.2.16, select the gas type then use digits 4 through 7 of the replacement sensor part number. To specify range of detection, reference the table below. For example, 100 ppm H2S would be 394-242400-100 *RANGE TABLE If greater than 999ppm, use a K (for 1000) If greater than 9,900ppm use a P (for %) Build range number from the right and use zeros to the left for blanks. 001 1 ppm 005 5 ppm 010 10 ppm 020 20 ppm 025 25 ppm 050 50 ppm 100 100 ppm 500 500 ppm 01K 1000 ppm 05K 5000 ppm 01P 1 % 04P 4 % 25P 25 %

Page 12

Detcon Product Guide

1.2.16 Spare Parts - DM-600 Replacement Electrochemical Sensor Cells DM-200, DM-400, DM-500, and DM-600 Series sensors
Part Number
370-12EA00-000 370-12EG00-000 370-12EM00-000 370-505000-000 370-191900-000 370-747500-000 370-12EB00-000 370-444400-000 370-747400-000 370-777700-000 370-747600-000 370-192100-000 370-12EO00-000 370-24EZ00-000 370-12ED00-000 370-12EJ00-000 370-272700-000 370-12EP00-000 370-232500-000 370-262600-000 370-848400-000 370-050500-000 370-090800-000 370-090900-000 370-131300-000 370-333300-000 370-242400-000 370-12EE00-000 370-12EK00-000 370-949400-000 370-646400-000 370-393900-000 370-414100-000 370-192000-000 370-232300-000 370-555500-000 370-12EF00-000 370-12EL00-000

Model Number - Description

Acetyldehyde plug-in detector assembly Acetylene plug-in detector assembly Acrylonitrile plug-in detector assembly Ammonia plug-indetector assembly Arsine plug-in detector assembly Bromine plug-in detector assembly Butadiene plug-in detector assembly Carbon Monoxide plug-in detector assembly Chlorine plug-in detector assembly Chlorine Dioxide plug-in detector assembly (0-1 PPM) Chlorine Dioxide plug-in detector assembly (0-50 PPM) Diborane plug-in detector assembly Ethanol plug-in detector assembly Ethyl Mercaptan plug-in detector assembly Ethylene plug-in detector assembly Ethylene Oxide plug-in detector assembly Fluorine plug-in detector assembly Formaldehyde plug-in detector assembly Germane plug-in detector assembly Hydrazine plug-in detector assembly Hydrogen PPM Range plug-in detector assembly Hydrogen LEL Range (1% and 4%) plug-in detector assy. Hydrogen Bromide plug-in detector assembly Hydrogen Chloride plug-in detector assembly Hydrogen Cyanide plug-in detector assembly Hydrogen Fluoride plug-in detector assembly Hydrogen Sulfide plug-in detector assembly Methanol plug-in detector assembly Methyl Mercaptan plug-in detector assembly Nitric Oxide plug-in detector assembly Nitrogen Dioxide plug-in detector assembly Ozone plug-in detector assembly Phosgene plug-in detector assembly Phosphine plug-in detector assembly Silane plug-in detector assembly Sulfur Dioxide plug-in detector assembly Vinyl Acetate plug-in detector assembly Vinyl Chloride plug-in detector assembly

Page 13

Detcon Product Guide

Section 1.3 Model Series 500 MicroSafe Gas Detection Sensors
1.3.1 Combustible Gas Detection Sensor Assemblies
Part Number
965-525420-100 965-225420-100

Model Number - Description

FP-524C Catalytic Combustible Gas Sensor Assembly IR-522 Infrared Combustible Hydrocarbon Sensor Assembly

Standard range for IR combustible hydrocarbon is 100% LEL. Contact the Detcon factory for other ranges.

1.3.2 Hydrogen Sulfide Gas Detection Sensor Assemblies

Part Number
965-015420-100 965-01542B-100 965-242480-100

Model Number - Description

TP-524D Solid State MOS H2S Sensor Assembly TP-524D-316SS Solid State MOS H2S Sensor Assembly DM-500IS-H2S Sensor Assembly

1.3.3 Oxygen Gas Detection Sensor Assemblies

Part Number
965-345420-025

Model Number - Description

DM-534 Oxygen Gas Sensor Assembly

1.3.4 VOC Gas Detection Sensor Assemblies

Part Number
965-P15420-010 965-P25420-01K

Model Number - Description

PI-500-VOC Sensor Assembly 0-10 PPM PI-501-VOC Sensor Assembly 0-1000 PPM

1.3.5 Carbon Dioxide Gas Detection Sensor Assemblies

Part Number
965-405420-005 965-425420-100

Model Number - Description

IR-540 Infrared Carbon Dioxide Sensor Assembly (range 0-5%) IR-542 Infrared Carbon Dioxide Sensor Assembly (range 10-100%)

Contact the Detcon factory for other ranges.

1.3.6 Electrochemical Toxic Gas Detection Sensor Assemblies

Standard Range is indicated by the last 3 digits of the part number. Contact the Detcon factory for other ranges. Note: Detcon recommends selection of the 316SS J-box for strong acid gas compounds (HCl, Cl2, Br2, F2, HBr, HF)

Part Number
965-12EA80-100 965-12EG80-100 965-12EM80-100 965-505080-100 965-191980-001 965-747580-005 965-12EB80-100 965-444480-100 965-747480-010 965-777780-001 965-747680-050 965-192180-005 965-12EO80-100 965-24EZ80-100 965-12ED80-100 965-12EJ80-100

Model Number - Description

DM-500IS-C2H3O Acetyldehyde Sensor Assembly DM-500IS-C2H2 Acetylene Sensor Assembly DM-500IS-C3H3N Acrylonitrile Sensor Assembly DM-502IS-NH3 Ammonia Sensor Assembly DM-500IS-AsH3 Arsine Sensor Assembly DM-500IS-Br2 Bromine Sensor Assembly DM-500IS-C4H6 Butadiene Sensor Assembly DM-500IS-CO Carbon Monoxide Sensor Assembly DM-500IS-CL2 Chlorine Sensor Assembly DM-501IS-CLO2 Chlorine Dioxide Sensor Assembly (0-1ppm) DM-500IS-CLO2 Chlorine Dioxide Sensor Assembly (0-50ppm) DM-500IS-B2H6 Diborane Sensor Assembly DM-500IS-C2H5OH Ethanol Sensor Assembly DM-500IS-C2H5SH Ethyl Mercaptans Sensor Assembly DM-500IS-C2H4 Ethylene Sensor Assembly DM-500IS-C2H4O Ethylene Oxide Sensor Assembly

Page 14

Detcon Product Guide

965-272780-001 965-12EP80-100 965-232580-002 965-262680-001 965-848480-100 965-050580-04P 965-070780-01P 965-090880-030 965-090980-030 965-131380-030 965-333380-010 965-242480-100 965-12EE80-100 965-24EK80-100 965-949480-100 965-646480-010 965-393980-001 965-414180-001 965-192080-005 965-232380-050 965-555580-020 965-12EF80-100 965-12EL80-100 DM-500IS-F2 Fluorine Sensor Assembly DM-500IS-CH2O Formaldehyde Sensor Assembly DM-500IS-GeH4 Germane Sensor Assembly DM-500IS-N2H4 Hydrazine Sensor Assembly DM-500IS-H2 Hydrogen Sensor Assembly (ppm Range) DM-501IS-H2 Hydrogen Sensor Assembly (% Range) DM-502IS-H2 Hydrogen Sensor Assembly (1% Range) DM-500IS-HBr Hydrogen Bromide Sensor Assembly DM-500IS-HCL Hydrogen Chloride Sensor Assembly DM-500IS-HCN Hydrogen Cyanide Sensor Assembly DM-500IS-HF Hydrogen Fluoride Sensor Assembly DM-500IS-H2S Hydrogen Sulfide Sensor Assembly DM-500IS-CH3OH Methanol Sensor Assembly DM-500IS-CH3SH Methyl Mercaptans Sensor Assembly DM-500IS-NO Nitric Oxide Sensor Assembly DM-500IS-NO2 Nitrogen Dioxide Sensor Assembly DM-500IS-O3 Ozone Sensor Assembly DM-500IS-COCL2 Phosgene Sensor Assembly DM-500IS-PH3 Phosphine Sensor Assembly DM-500IS-SiH4 Silane Sensor Assembly DM-500IS-SO2 Sulfur Dioxide Sensor Assembly DM-500IS-C4H6O2 Vinyl Acetate Sensor Assembly DM-500IS-C2H3CL Vinyl Chloride Sensor Assembly

1.3.7 Model Series 500 Spare Parts - Universal

Part Number
327-000000-000 960-202200-000 437-500000-000 943-004223-000 943-004241-000 975-225007-006 975-316007-006 897-850000-010 897-850901-010 897-850000-316 897-850901-316 943-003436-000 943-000000-000

Model Number - Description

Magnetic programming tool Condensation prevention packet (for J-Box replace annually) Stainless steel tag 2" pipe mount with sun shade 2" pipe mount (flat) Remote sensor Jbox, aluminum, 6 wire terminal strip Remote sensor Jbox, 316 stainless steel, 6 wire terminal strip Standard aluminum junction box with solid lid Standard aluminum junction box with lens cover Standard 316SS junction box with solid lid Standard 316SS junction box with lens cover Hazardous location water guard Calibration Sleeve/Wind Guard for use with splash guard

1.3.8 Spare Parts - FP-524C Catalytic Combustible Gas Sensor Assembly

Part Number
370-201600-000 399-602016-000 925-525400-100 500-005065-007 612-820000-000 613-120000-700 943-000006-132 975-RSFP00-524 975-000020-890

Model Number - Description

Combustible gas field replaceable plug-in sensor Stainless steel LEL sensor housings including plug-in sensor Plug-in transmitter module (Model FP-524C) Standard connector board Model series 400 & 500 sensors Stainless steel LEL sensor housing with threaded insert Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 FP-524 remote sensor separation kit Sensor Duct Mount Kit LEL

Page 15

Detcon Product Guide

600-002983-A01 612-400000-000 943-002273-000 Calibration adapter for splashguard Sensor/Sintered Filter replacement wrench FP/DM/IR Hazardous location dust guard (fits 1.5 x 18 thread)

1.3.9 Spare Parts - IR-522-CH Infrared Combustible Hydrocarbon Sensor Assembly

Part Number
370-365871-212 925-225400-100 500-002226-001 390-000087-000 613-120000-700 943-000006-132 975-RSIR00-522 975-000208-9IR 600-002983-A01 612-400000-000 943-002273-000

Model Number - Description

Combustible Hydrocarbon plug-in optical sensor for CHs Plug-in transmitter control module (Model IR-522) Standard connector board Model series 500 IR sensors Stainless steel sensor housing assembly CHs Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 IR-522 remote sensor separation kit Sensor Duct Mount Kit IR Calibration adapter for splashguard Sensor/Sintered Filter replacement wrench FP/DM/IR Hazardous location dust guard (fits 1.5 x 18 thread)

1.3.10 Spare Parts - TP-524C Solid State MOS H2S Sensor Assembly
Part Number
399-800000-000 925-015400-100 500-005065-007 326-000000-000 600-610000-000 943-000006-038 975-RSTP00-524 975-000020-891 600-002983-A01 943-002274-000

Model Number - Description

Solid State MOS H2S Sensor in Stainless Steel Housing Plug-in transmitter control module (Model TP-524) Standard connector board Model series 400 & 500 sensors Replaceable sintered stainless steel flame arrestor Sensor splash guard w/integral cal port TP-424/TP-524/TP-624 Calibration adapter TP TP-524 remote sensor separation kit Sensor Duct Mount Kit TP Calibration adapter for splashguard Hazardous location dust guard (fits 7/8 x 14 thread)

1.3.11 Spare Parts - DM-500-H2S Electro Chemical H2S Sensor Assembly

Part Number
925-995480-000 500-005065-007 394-242400-xxx* 613-002646-000 975-RSDM00-500 975-000020-892 370-242400-000 943-002273-000

Model Number - Description

Universal plug-in transmitter control module (DM-500IS) Standard connector board Model series 400 & 500 sensors Intrinsically Safe sensor housing with pre-preamp circuit *Specify range Sensor splash guard with twist lock adapter DM-500 remote sensor separation kit Sensor Duct Mount Kit DM Series Hydrogen Sulfide plug-in detector assembly Hazardous location dust guard (fits 1.5 x 18 thread)

Page 16

Detcon Product Guide

1.3.12 Spare Parts - DM-500-O2 Oxygen Deficiency Sensor Assembly
Part Number
370-399100-000 925-345400-025 500-005065-007 399-200000-000 330-X50000-000 613-120000-700 943-000006-132 975-RSDM00-534 975-000020-892 612-400000-000 943-002273-000

Model Number - Description

Oxygen field replaceable plug-in sensor 400/500/600 series Plug-in transmitter control module (Model DM-534) Standard connector board Model series 400 & 500 sensors Stainless steel sensor housing with insert and flame arrestor Field Replaceable sintered stainless steel flame arrestor Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 DM-534 remote sensor separation kit Sensor Duct Mount Kit DM Series Sensor/Sintered Filter replacement wrench FP/DM/IR Hazardous location dust guard (fits 1.5 x 18 thread)

1.3.13 Spare Parts - PI-500-VOC Volatile Organic Compound Sensor Assembly

Part Number
370-P10000-000 370-P20000-000 925-P15480-010 500-005065-007 390-404142-010 390-404142-01K 613-120000-700 943-000006-132 330-X50000-000 975-600020-000 975-600100-000 975-520040-000 975-RSPI00-500 975-000208-9IR 943-002273-000

Model Number - Description

Photo Ionization field replaceable plug-in detector 0-10 PPM Photo Ionization field replaceable plug-in detector 0-1000 PPM Plug-in transmitter control module (Model PI-500/PI-501) Standard connector board Model series 400 & 500 sensors PID sensor housing assembly 10 ppm PID sensor housing assembly 1000 ppm Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 Field replaceable sintered stainless steel flame arrestor PID 10.6eV replacement lamp PID detector replacement cell PID lamp cleaning kit PI-500 remote sensor separation kit Sensor Duct Mount Kit IR Hazardous location dust guard (fits 1.5 x 18 thread)

1.3.14 Spare Parts - IR-540-CO2 Infrared Sensor Assembly

Part Number
370-365878-111 370-287724-232 925-405400-003 500-002226-001 390-000088-000 613-120000-700 943-000006-132 975-RSIR00-540 975-000208-9IR 600-002983-A01 612-400000-000 943-002273-000

Model Number - Description

Carbon Dioxide plug-in optical sensor (up to 5% range) Carbon Dioxide plug-in optical sensor (10 to 100% range) Plug-in transmitter control module (Model IR-540) Standard connector board Model series 500 IR sensors Stainless steel sensor housing assembly CO2 Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 IR-540 remote sensor separation kit Sensor Duct Mount Kit IR Calibration adapter for splashguard Sensor/Sintered Filter replacement wrench FP/DM/IR Hazardous location dust guard (fits 1.5 x 18 thread)

Page 17

Detcon Product Guide

1.3.15 Spare Parts - DM-500 Electrochemical Toxic Gas Sensor Assemblies
Part Number
925-995480-000 500-005065-007 394-xxxx00-xxx* 613-002646-000 975-RSDM00-500 975-000020-892 943-002273-000

Model Number - Description

Universal plug-in transmitter control module (DM-500IS) Standard connector board Model series 400 & 500 sensors Intrinsically Safe sensor housing with pre-preamp circuit *Specify gas type and range Sensor splash guard with twist lock adapter DM-500 remote sensor separation kit Sensor Duct Mount Kit DM Series Hazardous location dust guard (fits 1.5 x 18 thread)
* To specify gas type (digits 4 through 7 of the part number) refer to section 1.3.16, select the gas type then use digits 4 through 7 of the replacement sensor part number. To specify range of detection, reference the table below. For example, 100 ppm H2S would be 394-242400-100 *RANGE TABLE If greater than 999ppm, use a K (for 1000) If greater than 9,900ppm use a P (for %) Build range number from the right and use zeros to the left for blanks. 001 1 ppm 005 5 ppm 010 10 ppm 020 20 ppm 025 25 ppm 050 50 ppm 100 100 ppm 500 500 ppm 01K 1000 ppm 05K 5000 ppm 01P 1 % 04P 4 % 25P 25 %

1.3.16 Spare Parts - DM-500 Replacement Electrochemical Sensor Cells

Part Number Model Number - Description Reference section 1.2.16 for Replacement Electrochemical Sensor Cells

Page 18

Detcon Product Guide

Section 1.4 Model Series 400 Gas Detection Sensors
1.4.1 Combustible Gas Detection Sensor Assemblies
Part Number
964-525420-100

Model Number - Description

FP-424C Catalytic Combustible Gas Sensor Assembly

1.4.2 Hydrogen Sulfide Gas Detection Sensor Assemblies

Part Number
964-015420-100 964-242480-100

Model Number - Description

TP-424C Solid State MOS H2S Sensor Assembly DM-400IS-H2S Sensor Assembly

1.4.3 Oxygen Gas Detection Sensor Assemblies

Part Number
964-345428-025

Model Number - Description

DM-434 Oxygen Gas Sensor Assembly

1.4.4 Electrochemical Toxic Gas Detection Sensor Assemblies

Standard Range is indicated by the last 3 digits of the part number. Contact the Detcon factory for other ranges. Note: Detcon recommends selection of the 316SS J-box for strong acid gas compounds (HCl, Cl2, Br2, F2, HBr, HF)

Part Number
964-505080-100 964-747580-005 964-444480-100 964-747480-010 964-777780-001 964-747680-050 964-24EZ80-100 964-12ED80-100 964-12EJ80-100 964-272780-001 964-848480-100 964-050580-04P 964-070780-01P 964-090880-030 964-090980-030 964-131380-030 964-242480-100 964-24EK80-100 964-949480-100 964-646480-010 964-414180-001 964-555580-020

Model Number - Description

DM-402IS-NH3 Ammonia Sensor Assembly DM-400IS-Br2 Bromine Sensor Assembly DM-400IS-CO Carbon Monoxide Sensor Assembly DM-400IS-CL2 Chlorine Sensor Assembly DM-401IS-CLO2 Chlorine Dioxide Sensor Assembly (0-1ppm) DM-400IS-CLO2 Chlorine Dioxide Sensor Assembly (0-50ppm) DM-400IS-C2H5SH Ethyl Mercaptans Sensor Assembly DM-400IS-C2H4 Ethylene Sensor Assembly DM-400IS-C2H4O Ethylene Oxide Sensor Assembly DM-400IS-F2 Fluorine Sensor Assembly DM-400IS-H2 Hydrogen Sensor Assembly (ppm Range) DM-401IS-H2 Hydrogen Sensor Assembly (% Range) DM-402IS-H2 Hydrogen Sensor Assembly (1% Range) DM-400IS-HBr Hydrogen Bromide Sensor Assembly DM-400IS-HCL Hydrogen Chloride Sensor Assembly DM-400IS-HCN Hydrogen Cyanide Sensor Assembly DM-400IS-H2S Hydrogen Sulfide Sensor Assembly DM-400IS-CH3SH Methyl Mercaptans Sensor Assembly DM-400IS-NO Nitric Oxide Sensor Assembly DM-400IS-NO2 Nitrogen Dioxide Sensor Assembly DM-400IS-COCL2 Phosgene Sensor Assembly DM-400IS-SO2 Sulfur Dioxide Sensor Assembly

1.4.5 Model Series 400 Spare Parts - Universal

Part Number
960-202200-000 437-500000-000 943-004223-000 943-004241-000 975-225007-006 975-316007-006

Model Number - Description

Condensation prevention packet (for J-Box replace annually) Stainless steel tag 2" pipe mount with sun shade 2" pipe mount (flat) Remote sensor Jbox, aluminum, 6 wire terminal strip Remote sensor Jbox, 316 stainless steel, 6 wire terminal strip

Page 19

Detcon Product Guide

897-850000-010 897-850901-010 897-850000-316 897-850901-316 943-003436-000 943-000000-000 Standard aluminum junction box with solid lid Standard aluminum junction box with lens cover Standard 316SS junction box with solid lid Standard 316SS junction box with lens cover Hazardous location water guard Calibration Sleeve/Wind Guard for use with splash guard

1.4.6 Spare Parts - FP-424C Catalytic Combustible Gas Sensor Assembly

Part Number
370-201600-000 612-820000-000 399-602016-000 924-525400-100 500-005065-007 613-120000-700 943-000006-132 975-RSFP00-424 975-000020-890 600-002983-A01 612-400000-000 943-002273-000

Model Number - Description

Combustible gas field replaceable plug-in sensor Stainless steel LEL sensor housing with threaded insert Stainless steel LEL sensor housings including plug-in sensor Plug-in transmitter module (Model FP-424C) Standard connector board Model series 400 & 500 sensors Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 FP-424 remote sensor separation kit Sensor Duct Mount Kit LEL Calibration adapter for splashguard Sensor/Sintered Filter replacement wrench FP/DM/IR Hazardous location dust guard (fits 1.5 x 18 thread)

1.4.7 Spare Parts - TP-424C Solid State MOS H2S Sensor Assembly
Part Number
399-800000-000 924-015400-100 500-005065-007 600-610000-000 943-000006-038 326-000000-000 975-RSTP00-424 975-000020-891 600-002983-A01 943-002274-000

Model Number - Description

Solid State MOS H2S Sensor in Stainless Steel Housing Plug-in transmitter control module (Model TP-424) Standard connector board Model series 400 & 500 sensors Sensor splash guard w/integral cal port TP-424/TP-524/TP-624 Calibration adapter TP Replaceable sintered stainless steel flame arrestor TP-424 remote sensor separation kit Sensor Duct Mount Kit TP Calibration adapter for splashguard Hazardous location dust guard (fits 7/8 x 14 thread)

1.4.8 Spare Parts - DM-400-H2S Electro Chemical H2S Sensor Assembly

Part Number
394-242400-xxx* 924-995480-000 500-005065-007 613-002646-000 975-RSDM00-400 975-000020-892 370-242400-000 943-002273-000

Model Number - Description

Intrinsically Safe sensor housing with pre-preamp circuit *Specify range Universal plug-in transmitter control module (DM-400IS) Standard connector board Model series 400 & 500 sensors Sensor splash guard with twist lock adapter DM-400 remote sensor separation kit Sensor Duct Mount Kit DM Series Hydrogen Sulfide plug-in detector assembly Hazardous location dust guard (fits 1.5 x 18 thread)

Page 20

Detcon Product Guide

1.4.9 Spare Parts - DM-400-O2 Oxygen Deficiency Sensor Assembly
Part Number
370-399100-000 924-345408-025 500-005065-034 330-X50000-000 399-200000-000 613-120000-700 943-000006-132 975-RSDM00-434 975-000020-892 612-400000-000 943-002273-000

Model Number - Description

Oxygen field replaceable plug-in sensor 400/500/600 series Plug-in transmitter control module (Model DM-434) Connector board for DM-400-O2 Field Replaceable sintered stainless steel flame arrestor Stainless steel sensor housing with insert and flame arrestor Sensor splash guard with integral cal-port - FP/DM/IR Calibration adapter FP/IR/DM/O2 DM-434 remote sensor separation kit Sensor Duct Mount Kit DM Series Sensor/Sintered Filter replacement wrench FP/DM/IR Hazardous location dust guard (fits 1.5 x 18 thread)

1.4.10 Spare Parts - DM-400 Electrochemical Toxic Gas Sensor Assemblies

Part Number
924-995480-000 500-005065-007 394-xxxx00-xxx* 613-002646-000 975-RSDM00-400 975-000020-892 943-002273-000

Model Number - Description

Universal plug-in transmitter control module (DM-400IS) Standard connector board Model series 400 & 500 sensors Intrinsically Safe sensor housing with pre-preamp circuit *Specify gas type and range Sensor splash guard with twist lock adapter DM-400 remote sensor separation kit Sensor Duct Mount Kit DM Series Hazardous location dust guard (fits 1.5 x 18 thread)
* To specify gas type (digits 4 through 7 of the part number) refer to section 1.4.16, select the gas type then use digits 4 through 7 of the replacement sensor part number. To specify range of detection, reference the table below. For example, 100 ppm H2S would be 394-242400-100 *RANGE TABLE If greater than 999ppm, use a K (for 1000) If greater than 9,900ppm use a P (for %) Build range number from the right and use zeros to the left for blanks. 001 1 ppm, 005 5 ppm 010 10 ppm, 020 20 ppm 025 25 ppm, 050 50 ppm 100 100 ppm, 500 500 ppm 01K 1000 ppm, 05K 5000 ppm 01P 1 %, 04P 4 % 25P 25 %

1.4.11 Spare Parts - DM-400 Replacement Electrochemical Sensor Cells

Part Number Model Number - Description Reference section 1.2.16 for Replacement Electrochemical Sensor Cells

Page 21

Detcon Product Guide

Section 1.5 Model Series 200XP UniTox Gas Detection Sensors
1.5.1 Oxygen Gas Detection Sensor Assemblies
Part Number
962-343405-025

Model Number - Description

DM-200-O2 Oxygen Gas Sensor Assembly

1.5.2 Electrochemical Toxic Gas Detection Sensor Assemblies

Standard Range is indicated by the last 3 digits of the part number. Contact the Detcon factory for other ranges.

Part Number
962-12EA05-100 962-12EG05-100 962-12EM05-100 962-505005-100 962-191905-001 962-747505-005 962-12EB05-100 962-444405-100 962-747405-010 962-777705-001 962-747605-050 962-192105-005 962-12EO05-100 962-24EZ05-100 962-12ED05-100 962-12EJ05-100 962-272705-001 962-12EP05-100 962-232505-002 962-262605-001 962-848405-100 962-050505-04P 962-070705-01P 962-090805-030 962-090905-030 962-131305-030 962-333305-010 962-242405-100 962-12EE05-100 962-24EK05-100 962-949405-100 962-646405-010 962-393905-001 962-414105-001 962-192005-005 962-232305-050 962-555505-020 962-12EF05-100 962-12EL05-100

Model Number - Description

DM-200XP-C2H3O Acetyldehyde Sensor Assembly DM-200XP-C2H2 Acetylene Sensor Assembly DM-200XP-C3H3N Acrylonitrile Sensor Assembly DM-202XP-NH3 Ammonia Sensor Assembly DM-200XP-AsH3 Arsine Sensor Assembly DM-200XP-Br2 Bromine Sensor Assembly DM-200XP-C4H6 Butadiene Sensor Assembly DM-200XP-CO Carbon Monoxide Sensor Assembly DM-200XP-CL2 Chlorine Sensor Assembly DM-201XP-CLO2 Chlorine Dioxide Sensor Assembly (0-1ppm) DM-200XP-CLO2 Chlorine Dioxide Sensor Assembly (0-50ppm) DM-200XP-B2H6 Diborane Sensor Assembly DM-200XP-C2H5OH Ethanol Sensor Assembly DM-200XP-C2H5SH Ethyl Mercaptans Sensor Assembly DM-200XP-C2H4 Ethylene Sensor Assembly DM-200XP-C2H4O Ethylene Oxide Sensor Assembly DM-200XP-F2 Fluorine Sensor Assembly DM-200XP-CH2O Formaldehyde Sensor Assembly DM-200XP-GeH4 Germane Sensor Assembly DM-200XP-N2H4 Hydrazine Sensor Assembly DM-200XP-H2 Hydrogen Sensor Assembly (ppm Range) DM-201XP-H2 Hydrogen Sensor Assembly (% Range) DM-202XP-H2 Hydrogen Sensor Assembly (1% Range) DM-200XP-HBr Hydrogen Bromide Sensor Assembly DM-200XP-HCL Hydrogen Chloride Sensor Assembly DM-200XP-HCN Hydrogen Cyanide Sensor Assembly DM-200XP-HF Hydrogen Fluoride Sensor Assembly DM-200XP-H2S Hydrogen Sulfide Sensor Assembly DM-200XP-CH3OH Methanol Sensor Assembly DM-200XP-CH3SH Methyl Mercaptans Sensor Assembly DM-200XP-NO Nitric Oxide Sensor Assembly DM-200XP-NO2 Nitrogen Dioxide Sensor Assembly DM-200XP-O3 Ozone Sensor Assembly DM-200XP-COCL2 Phosgene Sensor Assembly DM-200XP-PH3 Phosphine Sensor Assembly DM-200XP-SiH4 Silane Sensor Assembly DM-200XP-SO2 Sulfur Dioxide Sensor Assembly DM-200XP-C4H6O2 Vinyl Acetate Sensor Assembly DM-200XP-C2H3CL Vinyl Chloride Sensor Assembly

Page 22

Detcon Product Guide

1.5.2.1 Model Series 200XP Stainless Steel Junction Box Adder
Part Number Model Number - Description
To order a Model 200XP gas detection sensor with a Stainless Steel junction box with lense cover, modify the part number of the sensor(s) you want according to the following instructions: Indicate a "2" in position 9 of the PN (xxx-xxxxx2-xxx)

1.5.3 Model Series 200XP Spare Parts - Universal

Part Number
922-000000-000 327-000000-000 960-202200-000 360-000001-000 437-500000-000 943-004223-000 943-004241-000 897-850901-010 897-850901-316

Model Number - Description

200 universal transmitter module Magnetic programming tool Condensation Prevention Packet ISM Battery backup module Stainless steel tag 2" pipe mount with sun shade 2" pipe mount (flat) Standard aluminum junction box with lens cover Standard 316SS junction box with lens cover

1.5.4 Spare Parts - DM-200XP Intelligent Sensor Modules (ISM) (specify range*) Does not include Replacement Electrochemical Sensor Cell
Model Number - Description
392-12EA0S-xxx 392-12EG0S-xxx 392-12EM0S-xxx 392-50500S-xxx 392-19190S-xxx 392-74750S-xxx 392-12EB0S-xxx 392-44440S-xxx 392-74740S-xxx 392-77770S-xxx 392-74760S-xxx 392-19210S-xxx 392-12EO0S-xxx 392-24EZ0S-xxx 392-12ED0S-xxx 392-12EJ0S-xxx 392-27270S-xxx 392-12EP0S-xxx 392-23250S-xxx 392-26260S-xxx 392-84840S-xxx 392-05050S-xxx 392-09080S-xxx 392-09090S-xxx 392-13130S-xxx 392-33330S-xxx 392-24240S-xxx 392-12EE0S-xxx 392-12EK0S-xxx Acetyldehyde Intelligent Sensor Module (ISM) Acetylene Intelligent Sensor Module (ISM) Acrylonitrile Intelligent Sensor Module (ISM) Ammonia Intelligent Sensor Module (ISM) Arsine Intelligent Sensor Module (ISM) Bromine Intelligent Sensor Module (ISM) Butadiene Intelligent Sensor Module (ISM) Carbon Monoxide Intelligent Sensor Module (ISM) Chlorine Intelligent Sensor Module (ISM) Chlorine Dioxide Intelligent Sensor Module (ISM) (0-1 PPM) Chlorine Dioxide Intelligent Sensor Module (ISM) (0-50 PPM) Diborane Intelligent Sensor Module (ISM) Ethanol Intelligent Sensor Module (ISM) Ethyl Mercaptan Intelligent Sensor Module (ISM) Ethylene Intelligent Sensor Module (ISM) Ethylene Oxide Intelligent Sensor Module (ISM) Fluorine Intelligent Sensor Module (ISM) Formaldehyde Intelligent Sensor Module (ISM) Germane Intelligent Sensor Module (ISM) Hydrazine Intelligent Sensor Module (ISM) Hydrogen PPM Range Intelligent Sensor Module (ISM) Hydrogen LEL Range (1% and 4%) plug-in detector assy. Hydrogen Bromide Intelligent Sensor Module (ISM) Hydrogen Chloride Intelligent Sensor Module (ISM) Hydrogen Cyanide Intelligent Sensor Module (ISM) Hydrogen Fluoride Intelligent Sensor Module (ISM) Hydrogen Sulfide Intelligent Sensor Module (ISM) Methanol Intelligent Sensor Module (ISM) Methyl Mercaptan Intelligent Sensor Module (ISM)

Page 23

Detcon Product Guide

392-94940S-xxx 392-64640S-xxx 392-34340S-xxx 392-39390S-xxx 392-41410S-xxx 392-19200S-xxx 392-23230S-xxx 392-55550S-xxx 392-12EF0S-xxx 392-12EL0S-xxx Nitric Oxide Intelligent Sensor Module (ISM) Nitrogen Dioxide Intelligent Sensor Module (ISM) Oxygen Intelligent Sensor Module (ISM) Ozone Intelligent Sensor Module (ISM) Phosgene Intelligent Sensor Module (ISM) Phosphine Intelligent Sensor Module (ISM) Silane Intelligent Sensor Module (ISM) Sulfur Dioxide Intelligent Sensor Module (ISM) Vinyl Acetate Intelligent Sensor Module (ISM) Vinyl Chloride Intelligent Sensor Module (ISM)
*RANGE TABLE If greater than 999ppm, use a K (for 1000) If greater than 9,900ppm use a P (for %) Build range number from the right and use zeros to the left for blanks. 001 1 ppm 005 5 ppm 010 10 ppm 020 20 ppm 025 25 ppm 050 50 ppm 100 100 ppm 500 500 ppm 01K 1000 ppm 05K 5000 ppm 01P 1 % 04P 4 % 25P 25 %

1.5.5 Spare Parts - DM-200XP Replacement Electrochemical Sensor Cells

Part Number Model Number - Description Reference section 1.2.16 for Replacement Electrochemical Sensor Cells

Page 24

Detcon Product Guide

Section 1.6 Detcon Sample Draw Manifold Assemblies
1.6.1 Model Series SD Sample Draw Manifolds and Sampling Conditioning Systems*
Part Number
971-041170-00L 971-071170-00L 972-041170-00L 972-071170-00L

Model Number - Description

Detcon Model SD-1x1 single sensor, single pump sample draw manifold, Nema 4X weather proof enclosure, 110 VAC power input Detcon Model SD-1x1 single sensor, single pump sample draw manifold, Nema 7 explosion proof enclosure, 110 VAC power input Detcon Model SD-2x1 dual sensor, single pump sample draw manifold, Nema 4X weather proof enclosure, 110 VAC power input Detcon Model SD-2x1 dual sensor, single pump sample draw manifold, Nema 7 explosion proof enclosure, 110 VAC power input

*Sample draw manifolds do not include gas sensor assemblies

1.6.2 Spare Parts for Sample Draw Manifolds and Sampling Conditioning Systems
Part Number
351-900000-000 351-152021-400 348-900000-000 500-005151-002 500-019370-000 823-6LL200-000 360-6SD1SD-200 297-000000-000 298-000000-000 823-600000-000 823-6ORF00-000 943-7L0000-000 284-000000-000 325-400000-000 284-100000-000 283-1R0000-000 284-200000-000 283-1G0000-000 600-001747-SS5 943-121747-SS5 311-500000-000 310-600000-000 311-100000-000 311-200000-000 984-000000-000 997-000000-000 984-200000-000

Model Number - Description

Sample draw pump, dual diaphragm, 120 VAC Sample draw pump, single diaphragm, 24 VDC Adjustable flow meter, Range 0-1 liter Flow fault sensor and flow fault switch assembly Flow fault/liquid level alarm and shut-down module Liquid level detector Line power, power supply 24 VDC, 2.4 amps Fuse, 1 amp 3AG Fuse, 2 amp 3AG Moisture knockout assembly with coalescent filter Coalescent replacement filter Molecular sieve filter assembly Power switch Nema 4X Power switch Nema 7 Red indicator lamp Nema 4X Red indicator lamp Nema 7 Green indicator lamp Nema 4x Green indicator lamp Nema 7 Stainless steel sample chamber (fits electrochemical, catalytic, and infrared sensor housings). Does not include fittings. Stainess steel sample chamber (fits electrochemical, catalytic, and infrared sensor housings) Includes straight and elbow fittings. Directional valve, 3-way stainless steel Stainless steel bulkhead fitting 1/4 tube 1/4 tube Stainless steel elbow fitting 1/4 tube 1/8 NPT Stainless steel straight fitting 1/4 tube 1/8 NPT Polyvinyl chloride (Tygon) tubing, .25 OD Stainless steel tubing, .25 OD Teflon tubing, .25 OD

Page 25

Detcon Product Guide

Section 1.7 Fire Detection Sensors Assemblies
1.7.1 UV/IR Fire Detector Assemblies
Part Number
995-884200-000

Model Number - Description

Electro-optical UV/IR digital fire detector

Page 26

Detcon Product Guide

Section 2.0 Gas Detection Control Systems
Section 2.1 Model 10C Single Sensor Control Card Gas Detection Systems 2.1.1 Model Series 10C Control Modules
Part Number
915-520050-100 915-010050-100 915-340050-25P 915-EA0050-100 915-EG0050-100 915-EM0050-100 915-000050-100 915-190050-001 915-750050-005 915-EB0050-100 915-400050-01P 915-440050-100 915-740050-010 915-760050-001 915-210050-005 915-EO0050-100 915-EZ0050-100 915-ED0050-100 915-EJ0050-100 915-270050-001 915-EP0050-100 915-250050-002 915-260050-001 915-840050-100 915-050050-100 915-080050-030 915-140050-030 915-040050-030 915-330050-010 915-EE0050-100 915-EK0050-100 915-940050-100 915-640050-010 915-390050-001 915-410050-001 915-200050-005 915-230050-050 915-540050-020 915-EF0050-100 915-EL0050-100 910-000008-003

Model Number - Description

Model CG-10C, 0-100 % LEL combustible gas Model HS-10C, 0-100 PPM Hydrogen Sulfide Model O2-10C, 0-25 % Oxygen Deficiency Model C2H30-10C, 0-100 PPM Acetyldehyde Model C2H2-10C, 0-100 PPM Acetylene Model C3H3N-10C, 0-100 PPM Acrylonitrile Model NH3-10C, 0-100 PPM Ammonia Model AsH3-10C, 0-1 PPM Arsine Model Br2-10C, 0-5 PPM Bromine Model C4H6-10C, 0-100 PPM Butadiene Model C02-10C, 0-1 % Carbon Dioxide Model CO-10C, 0-100 PPM Carbon Monoxide Model CL2-10C, 0-10 PPM Chlorine Model CLO2-10C, 0-1 PPM Chlorine Dioxide Model B2H6-10C, 0-5 PPM Diborane Model C2H5OH-10C, 0-100 PPM Ethanol Model C2H5SH-10C, 0-100 PPM Ethyl Mercaptans Model C2H4-10C, 0-100 PPM Ethylene Model C2H4O-10C, 0-100 PPM Ethylene Oxide Model F2-10C, 0-1 PPM Fluorine Model CH20-10C, 0-100 PPM Formaldehyde Model GeH4-10C, 0-2 PPM Germane Model N2H4-10C, 0-1 PPM Hydrazine Model H2-10C, 0-100 PPM Hydrogen Model H2-10C, 0-100 % LEL Hydrogen Model Hbr-10C, 0-30 PPM Hydrogen Bromide Model HCL-10C, 0-30 PPM Hydrogen Chloride Model HCN-10C, 0-30 PPM Hydrogen Cyanide Model HF-10C, 0-10 PPM Hydrogen Fluoride Model CH30H-10C, 0-100 PPM Methanol Model CH3SH-10C, 0-100 PPM Methyl Mercaptans Model NO-10C, 0-100 PPM Nitric Oxide Model NO2-10C, 0-10 PPM Nitrogen Dioxide Model O3-10C, 0-1 PPM Ozone Model COCL2-10C, 0-1 PPM Phosgene Model PH3-10C, 0-5 PPM Phosphine Model SiH4-10C, 0-50 PPM Silane Model SO2-10C, 0-20 PPM Sulfur Dioxide Model C4H6O2-10C, 0-100 PPM Vinyl Acetate Model C2H3CL-10C, 0-100 PPM Vinyl Chloride Detcon Model Series 10 Blank Plate

Page 27

Detcon Product Guide

2.1.2 Model 10 Nema 1 Panel Mount Enclosures and Mainframe Hardware Assemblies
Part Number
951-041040-000 951-081040-000 951-161040-000 975-124150-000 975-124300-000

Model Number - Description

Model 410-N1-24VDC Nema 1, 4 channel panel mount mainframe. Requires external 24 VDC power supply. Model 810-N1-24VDC Nema 1, 8 channel panel mount mainframe. Requires external 24 VDC power supply. Model 1610-N1 Nema 1, 16 channel panel mount mainframe. Requires external 24 VDC power supply. Nema 1 line power 24 VDC power supply, 6.25 amps 150 Watts, standard 19" rack mount Nema 1 line power 24 VDC power supply, 12.5 amps 300 Watts, standard 19" rack mount

2.1.3 Model 10 Nema 4X Weatherproof Wall Mount Enclosures & Mainframe Hardware Assemblies

Part Number
954-061050-000 954-101050-000 954-161050-000 954-041052-000 954-081052-000 954-161052-000

Model Number - Description

Model 610-N4X Nema 4X, 6 channel weatherproof wall mount enclosure with line power 24 VDC power supply Model 1010-N4X Nema 4X, 10 channel weatherproof wall mount enclosure with line power 24 VDC power supply Model 1610-N4X Nema 4X, 16 channel weatherproof wall mount enclosure with line power 24 VDC power supply Model 410SS-N4X Nema 4X, 4 channel stainless steel weatherproof wall mount with line power 24VDC PS Model 810SS-N4X Nema 4X, 8 channel stainless steel weatherproof wall mount with line power 24VDC PS Model 1610SS-N4X Nema 4X, 16 channel stainless steel weatherproof wall mount with line power 24VDC PS

2.1.4 Model 10 Nema 7 Explosion Proof Wall Mount Enclosures and Mainframe Hardward Assemblies

Part Number
957-061050-000 957-101050-000

Model Number - Description

Model 610XP Nema 7, 6 channel explosion proof wall mount enclosure with line power 24 VDC power supply Model 1010XP Nema 7, 10 channel explosion proof wall mount enclosure with line power 24 VDC power supply

2.1.5 Spare Parts Model 10 Series Control Systems

Part Number
975-3675R0-000 975-367509-87P 910-000008-003 500-502600-000 591-000000-000 224-000000-000 320-228861-103 320-228861-105 360-SWS100-024 360-SWS150-024 360-SWS300-024

Model Number - Description

Z-Purge Kit with pressure switch and plate (for Mod 10/12 N4X) Z-Purge Kit with pressure switch and plate (for X40 1600/6400 N4X) Detcon Model Series 10 Blank Plate Auxiliary Alarm Relay Board Model 10 extender card Gold plated jumper tab 3 Amp Circuit Breaker/Power Switch (610-N4X, 1010-N4X) 5 Amp Circuit Breaker/Power Switch (1610-N4X) Power supply (610-N4X) Power supply (1010-N4X) Power supply (1610-N4X)

Page 28

Detcon Product Guide

Section 2.2 Model 12 Single Sensor Control Card Gas Detection Systems 2.2.1 Model Series 12 Control Modules
Part Number
912-520040-100 912-010040-100 912-340042-5X0 912-EA0040-100 912-EG0040-100 912-EM0040-100 912-000040-100 912-190040-1X0 912-750040-5X0 912-EB0040-100 912-400041-X00 912-440040-100 912-740041-0X0 912-760040-1X0 912-210040-5X0 912-EO0040-100 912-EZ0040-100 912-ED0040-100 912-EJ0040-100 912-270040-1X0 912-EP0040-100 912-250040-2X0 912-260040-1X0 912-840040-100 912-050040-100 912-080040-030 912-140040-030 912-040040-030 912-330050-010 912-EE0040-100 912-EK0040-100 912-940040-100 912-640040-010 912-390040-1X0 912-410040-1X0 912-200040-5X0 912-230040-050 912-540040-020 912-EF0040-100 912-EL0040-100 912-000008-005

Model Number - Description

Model CG12, 0-100 % LEL combustible gas Model HS-12, 0-100 PPM Hydrogen Sulfide Model O2-12, 0-25 % Oxygen Deficiency Model C2H30-12, 0-100 PPM Acetyldehyde Model C2H2-12, 0-100 PPM Acetylene Model C3H3N-12, 0-100 PPM Acrylonitrile Model NH3-12, 0-100 PPM Ammonia Model AsH3-12, 0-1 PPM Arsine Model Br2-12, 0-5 PPM Bromine Model C4H6-12, 0-100 PPM Butadiene Model CO2-12, 0-1 % Carbon Dioxide Model CO-12, 0-100 PPM Carbon Monoxide Model CL2-12, 0-10 PPM Chlorine Model CLO2-12, 0-1 PPM Chlorine Dioxide Model B2H6-12, 0-5 PPM Diborane Model C2H5OH-12, 0-99 PPM Ethanol Model C2H5SH-12, 0-100 PPM Ethyl Mercaptans Model C2H4-12, 0-100 PPM Ethylene Model C2H4O-12, 0-100 PPM Ethylene Oxide Model F2-12, 0-1 PPM Fluorine Model CH20-12, 0-100 PPM Formaldehyde Model GeH4-12, 0-2 PPM Germane Model N2H4-12, 0-1 PPM Hydrazine Model H2-12, 0-100 PPM Hydrogen Model H2-12, 0-100 % LEL Hydrogen Model Hbr-12, 0-30 PPM Hydrogen Bromide Model HCL-12, 0-30 PPM Hydrogen Chloride Model HCN-10, 0-30 PPM Hydrogen Cyanide Model HF-12, 0-10 PPM Hydrogen Fluoride Model CH30H-12, 0-100 PPM Methanol Model CH3SH-12, 0-100 PPM Methyl Mercaptans Model NO-12, 0-100 PPM Nitric Oxide Model NO2-12, 0-10 PPM Nitrogen Dioxide Model O3-12, 0-1 PPM Ozone Model COCL2-12, 0-1 PPM Phosgene Model PH3-12, 0-5 PPM Phosphine Model SiH4-12, 0-50 PPM Silane Model SO2-12, 0-20 PPM Sulfur Dioxide Model C4H6O2-12, 0-100 PPM Vinyl Acetate Model C2H3CL-12, 0-100 PPM Vinyl Chloride Detcon Model Series 12 Blank Plate

Page 29

Detcon Product Guide

2.2.2 Model 12 Nema 1 Panel Mount Enclosures and Mainframe Hardware Assemblies
Part Number
951-061240-000 951-121240-000 975-124150-000 975-124300-000

Model Number - Description

Model 612 Nema 1, 6 channel panel mount mainframe (Requires external line power 24 VDC power supply) Model 1212 Nema 1, 12 channel panel mount mainframe (Requires external line power 24 VDC power supply) Nema 1 line power 24 VDC power supply, 6.25 amps 150 Watts, standard 19" rack mount Nema 1 line power 24 VDC power supply, 12.5 amps 300 Watts, standard 19" rack mount

2.2.3 Model 12 Nema 4X Weatherproof Wall Mount Enclosures & Mainframe Hardware Assemblies

Part Number
954-081250-000 954-121250-000 954-061242-000 954-121242-000

Model Number - Description

Model 812-N4X Nema 4X, 8 channel weatherproof wall mount enclosure with line power 24 VDC power supply, 110/220 VAC Model 1212-N4X Nema 4X, 12 channel weatherproof wall mount enclosure with line power 24 VDC power supply Model 612SS-N4X Nema 1, 6 channel stainless steel weatherproof wall mount enclosure with line power 24 VDC power supply Model 1212SS-N4X Nema 1, 12 channel stainless steel weatherproof wall mount enclosure w/line pwr 24 VDC pwr supply

2.2.4 Model 12 Nema 7 Explosion Proof Wall Mount Enclosures and Mainframe Hardward Assemblies

Part Number
957-041250-000 957-081250-000

Model Number - Description

Model 412XP Nema 7, 4 channel explosion proof wall mount enclosure with line power 24 VDC power supply Model 812XP Nema 7, 8 channel explosion proof wall mount enclosure with line power 24 VDC power supply

2.2.5 Spare Parts Model 12 Series Control Systems

Part Number
975-3675R0-000 912-000008-005 500-502600-000 224-000000-000 360-801024-000 360-SWS150-024 360-SWS300-024 328-000000-000 298-000000-000 300-000000-000 321-800000-000 280-600000-000 280-700000-000 281-200000-000

Model Number - Description

Z-Purge Kit with pressure switch and plate (for Mod 10/12 N4X) Detcon Model Series 12 Blank Plate Auxiliary Alarm Relay Board Gold plated jumper tab Power supply (412-N4X) Power supply (812-N4X) Power supply (1212-N4X) Panel mount fuse holder 2 amp slow blow fuse (412-N4X, 812-N4X) 3 amp slow blow fuse (1212-N4X) Switch for power and alarm disable Green switch cap for power switch Red switch cap for power switch LED for power and alarm disable switch

Page 30

Detcon Product Guide

Section 2.3 Model Series X40 Multi-Channel Gas Detection Systems 2.3.1 Model X40 Gas Detection Systems
Part Number
954-010110-000 954-020210-000 954-040410-000 954-080810-000 954-164010-000 954-324010-000 957-020210-000

Model Number - Description

Model 140-N4X, single channel gas detection control system in wall mount weatherproof enclosure 110/220VAC 24VDC pwr supply Model 240-N4X, dual channel gas detection control system in wall mount weatherproof enclosure w/110/220 VAC 24 VDC pwr supply Model 440-N4X, four channel gas detection control system in wall mount weatherproof enclosure w/ 110/220 VAC 24 VDC pwr supply Model 840-N4X, eight channel gas detection control system in wall mount weatherproof enclosure w/ 110/220 VAC 24 VDC pwr supply Model 1640-N4X, 16 channel gas detection control system in wall mount weatherproof enclosure w/ 110/220 VAC 24 VDC pwr supply Model 3240-N4X, 32 channel gas detection control system in wall mount weatherproof enclosure w/ 110/220 VAC 24 VDC pwr supply Model 240-N7, dual channel gas detection control system in explosion proof wall mount weatherproof enclosure with 110/220 VAC 24 VDC power supply Model 440-N7, four channel gas detection control system in explosion proof wall mount weatherproof enclosure with 110/220 VAC 24 VDC power supply Model 840-N7, eight channel gas detection control system in explosion proof wall mount weatherproof enclosure with 110/220 VAC 24 VDC power supply Model 1640-N7, 16 channel gas detection control system in explosion proof wall mount weatherproof enclosure with 110/220 VAC 24 VDC power supply Model 3240-N7, 32 channel gas detection control system in explosion proof wall mount weatherproof enclosure with 110/220 VAC 24 VDC power supply

957-040410-000

957-080810-000

957-164010-000

957-324010-000

2.3.3 Spare Parts - Model X40 Gas Detection Systems

Part Number
975-110140-240 975-110440-840 500-005074-001 500-005075-001 500-005076-001 500-005077-001 500-005071-LCD 500-005072-LCD 500-005073-LCD 360-500001-000 360-600001-000 975-367509-87P 980-261170-000 500-005079-000

Model Number - Description

Standby battery kit for 140-N4X/240-N4X Standby battery kit for 440-N4X/840-N4X Motherboard PCB assembly for 140-N4X Motherboard PCB assembly for 240-N4X Motherboard PCB assembly for 440-N4X Motherboard PCB assembly for 840-N4X Controller PCB assembly with LCD module for 140/240-N4X Controller PCB assembly with LCD module for 440-N4X Controller PCB assembly with LCD module for 840-N4X Replacement power supply with cables for 140/240-N4X Replacement power supply with cables for 440/840-N4X Z-Purge Kit with pressure switch and plate (for X40 1600/6400 N4X) X40 data download cable 4-20 mA Output Module 140/240/440-N4X

2.3.4 Item Code Configuration Sheet - Model X40 Controllers

Page 31

Detcon Product Guide

Page 32

Detcon Product Guide

Section 2.4 Model Series 1600A Multi-Channel Gas Detection Control Systems 2.4.1 Model 1600 Gas Detection Control Systems
Part Number
954-161610-000 95P-161610-000 95R-161610-000

Model Number - Description

Model 1600A-N4X, 16 channel gas detection control system in wall mount weatherproof enclosure w/110/220 VAC 24 VDC pwr supply.* Model 1600A-N1P, 16 channel gas detection control system in panel mount enclosure with 110/220 VAC 24 VDC power supply.* Model 1600A-N1R, 16 channel gas detection control system in rack mount enclosure with 110/220 VAC 24 VDC power supply.*
*Addressable I/O Modules are not included and are sold separately.

2.4.2 IO Nodes and Enclosure Options

Part Number
954-R11601-000 957-R11601-000

Model Number - Description

NEMA 4X weatherproof enclosure NEMA 7 explosion proof enclosure

2.4.3 IO Modules
Part Number
360-16N030-024 360-16N075-024 360-16N120-024 976-041400-000 975-041400-000 975-041402-000 975-041401-000 976-485485-000

Model Number - Description

Din Rail Power Supply 30 Watts including breaker and overvoltage modules (recommended for use with up to 4 remote sensors) Din Rail Power Supply 75 Watts including breaker and overvoltage modules (recommended for use with up to 8 remote sensors) Din Rail Power Supply 120 Watts including breaker and overvoltage modules (recommended for use with up to 16 remote sensors) Detcon Model DA-4 four channel 4-20 maDC input module Detcon Model RL-4 four relay alarm module Detcon Model DI-4 four channel dry contact input module Detcon Model AO-4 four channel analog output module RS-485 Isolated Repeater, 9-30VDC

2.4.4 Spare Parts - Model 1600 Gas Detection Control Systems

Part Number
975-367509-87P 360-SWS150-024

Model Number - Description

Z-Purge Kit with pressure switch and plate (for X40 1600/6400 N4X) 24VDC power supply

Page 33

Detcon Product Guide

Section 2.5 Detcon Model 880 PLC Graphic Gas Detection Control Systems 2.5.1 PLC Graphic Control Systems
Part Number
904-880A00-000

Model Number - Description

Detcon Model 880A-N4X Modbus Master gas detection control system in a NEMA 4 enclosure for use with distributed I/O nodes and up to 72 analog field devices Detcon Model 880S-N4X Modbus Master gas detection control system in a NEMA 4 enclosure for use with addressable field devices utilizing a Modbus RTU protocol Detcon Model 880A-N1R Modbus Master gas detection control system in a NEMA 1 19 rack mount assembly. System design for use with distributed I/O nodes and up to 72 analog field devices Detcon Model 880S-N1R Modbus Master gas detection control system in a NEMA 1 19 rack mount assembly. System design for use with distributed I/O nodes and up to 72 analog field devices Detcon Model 880RA-N4X Analog remote display with touch screen and NEMA 4X enclosure Detcon Model 880RS-N4X Serial remote display with touch screen and NEMA 4X enclosure

904-880S00-000

90R-880A00-000

90R-880S00-000

904-880RA0-000 904-880RS0-000

2.5.2 Addressable IO Modules

Part Number
976-041400-000 975-041400-000 975-041402-000 975-041401-000 976-485485-000

Model Number - Description

Detcon Model DA-4 four channel 4-20 maDC input module Detcon Model RL-4 four relay alarm module Detcon Model DI-4 four channel dry contact input module Detcon Model AO-4 four channel analog output module RS-485 Isolated Repeater, 9-30VDC

2.4.4 Model Addressable IO Modules

Part Number
954-R11601-000 957-R11601-000 360-16N030-024 360-16N075-024 360-16N120-024

Model Number - Description

NEMA 4X weatherproof enclosure NEMA 7 explosion proof enclosure Din Rail Power Supply 30 Watts including breaker and overvoltage modules (recommended for use with up to 4 remote sensors) Din Rail Power Supply 75 Watts including breaker and overvoltage modules (recommended for use with up to 8 remote sensors) Din Rail Power Supply 120 Watts including breaker and overvoltage modules (recommended for use with up to 16 remote sensors)

2.4.5 Control Function Modules

Part Number
995-08TR00-000 995-321091 995-323220-100 995-459082-000 995-508803-500

Model Number - Description

D2-08TR 8 relay digital output D2-Bat-1 * D2-250 & D3-350 CPU Battery D2-DCM Data communication module C-more 8" Color Touch Panel FA-ISOCON * Isolated RS232 to RS422

Page 34

Detcon Product Guide

Section 2.6 Remote Displays
Part Number
954-083200-DSC 957-083200-DSC 904-88RA00-000 904-88RS00-000

Model Number - Description

Detcon Model RD-8X-N4X read-only remote display in NEMA 4X enclosure. Configurable up to 32 channels. Detcon Model RD-8X-N7 read-only remote display in NEMA 7 enclosure. Configurable up to 32 channels. Detcon Model 880RA-N4X Analog remote display with touch screen and NEMA 4X enclosure Detcon Model 880RA-N4X Serial remote display with touch screen and NEMA 4X enclosure

Page 35

Detcon Product Guide

Section 3.0 Gas Detection System Accessories/Control Circuits
Part Number
500-521600-102 980-984201-500 500-003670-024 500-511000-000 975-343100-000 975-343100-024 975-343000-005 975-343002-007 500-502600-000 500-503200-000 500-512000-000 500-505000-000 500-011803-000 951-000000-CTF 951-FP0000-TTF 951-TP0000-TTF 951-DM0000-TTF 951-O20000-TTF

Model Number - Description

RD-4X Modbus output control card, 16 channel 4-20 madc input, RS485 Modbus output RS-485 cable, armored, shielded, 2-twisted pair (Priced per foot) Surge protector control card, 4 channel 3-wire 4-20 madc Line power surge protector, 3-wire 117 VAC, 15 amps Sensor surge protector Nema 7, 3 conductor, 24 VDC Sensor surge protector Nema 7, 6 conductor, 24 VDC Sensor RFI/EMI choke Nema 7, 5", 11 conductor Sensor RFI/EMI choke Nema 7, 7", 11 conductor Auxiliary alarm relay board, Four 8 amp 30 VDC relays form C contacts Analog signal zoning module, up to eight 4-20 madc inputs, outputs the highest signal 8 channel alarm acknowledge/silence card Low voltage cutoff circuit, 24 VDC input, adjustable cutoff 12 pin connector PCB for remote sensor and DA-1 Model 10 and Model 12 Series control card test fixture FP Transmitter Test Fixture for Model Series FP-424, FP-524 and FP624 Transmitters TP Transmitter Test Fixture for Model Series TP-424, TP-524 and TP624 Transmitters DM Transmitter Test Fixture for Model Series DM-500 and DM-600 transmitters O2 Transmitter Test Fixture for Model Series DM-534 and DM-634 Transmitters

Page 36

Detcon Product Guide

Section 4.0 Stand Alone Power Supplies and Stand-by Battery Systems with Battery Chargers
Part Number
975-724012-110 975-124150-000 975-424172-110 975-724172-110 975-124300-000 975-424288-110 975-724288-110 975-424408-110 975-424600-110

Model Number - Description

Nema 7 line power 24 VDC power supply, 1/2 amp 12 Watts Nema 1 line power 24 VDC power supply, 6.25 amps 150 Watts, standard 19" rack mount Nema 4X weatherproof line power 24 VDC power supply, 6.25 amps 150 Watts Nema 7 line power 24 VDC power supply, 6.25 amps 150 Watts Nema 1 line power 24 VDC power supply, 12.5 amps 300 Watts, standard 19" rack mount Nema 4X weatherproof line power 24 VDC power supply, 12.5 amps 300 Watts Nema 7 line power 24 VDC power supply, 12.5 amps 300 Watts Nema 4X weatherproof 24 VDC 17 amp hour battery supply with line charger Nema 4X weatherproof 24 VDC 25 amp hour battery supply with line charger

Page 37

Detcon Product Guide

Section 5.0 Gas Detection Calibration Standards, Calibrators and Accessories
Section 5.1 Calibration Kits
Part Number
943-020000-000 943-050000-000 943-100000-000 943-050000-HRG

Model Number - Description

Span gas kit complete with 200 ml fixed flow regulator, 6 foot length of tubing, humidifier, calibration sleeve/wind guard, carrying case Span gas kit complete with 500 ml fixed flow regulator, 6 foot length of tubing, humidifier,calibration sleeve/wind guard, carrying case Span gas kit complete with 1 liter fixed flow regulator, 6 foot length of tubing, humidifier, calibration sleeve/wind guard, carrying case Span gas kit complete with 500 ml fixed flow regulator suitable for highly reactive gases (Cl2, HCl, HCN), 2 ft length of teflon tubing, cal sleeve/wind guard, carrying case. Requires teflon cal adapter. Span gas kit complete with 500 ml fixed flow regulator suitable for NH3, 2 foot length of teflon tubing, calibration sleeve/wind guard, carrying case. Requires teflon cal adapter.
Note: Span Gas Kits do not include span gas cylinders or calibration adaptors. Span gas cylinders and calibration adaptors are added and treated as separate line items.

943-05AM00-000

Section 5.2 Span Gas Cylinders

Part Number
942-001123-000 942-000212-010 942-000212-025 942-000212-050 942-400122-02K 942-400123-2X5 942-400123-005 942-440122-050 942-440122-100 942-440122-250 942-740212-002 942-740212-003 942-740212-005 942-740212-010 942-840124-050 942-140212-005 942-140212-010 942-140212-025 942-040212-010 942-040212-025 942-010212-005 942-010212-010 942-010112-020 942-010112-025 942-010112-040 942-010112-050 942-523122-005

Model Number - Description

Zero Air, 103 liters Ammonia, 10 PPM in Nitrogen, 58 liters Ammonia, 25 PPM in Nitrogen, 58 liters Ammonia, 50 PPM in Nitrogen, 58 liters Carbon Dioxide, 2000 PPM in Air, 103 liters Carbon Dioxide, 2.5% in Air, 103 liters Carbon Dioxide, 5% in Air, 103 liters Carbon Monoxide, 50 PPM in Air, 103 liters Carbon Monoxide, 100 PPM in Air, 103 liters Carbon Monoxide, 250 PPM in Air, 103 liters Chlorine, 2 PPM in Nitrogen, 58 liters Chlorine, 3 PPM in Nitrogen, 58 liters Chlorine, 5 PPM in Nitrogen, 58 liters Chlorine, 10 PPM in Nitrogen, 58 liters Hydrogen, 50% LEL in Air, 103 liters Hydrogen Chloride, 5 PPM in Nitrogen, 58 liters Hydrogen Chloride, 10 PPM in Nitrogen, 58 liters Hydrogen Chloride, 25 PPM in Nitrogen, 58 liters Hydrogen Cyanide, 10 PPM in Nitrogen, 58 liters Hydrogen Cyanide, 25 PPM in Nitrogen, 58 liters Hydrogen Sulfide, 5 PPM in Nitrogen, 58 liters Hydrogen Sulfide, 10 PPM in Nitrogen, 58 liters Hydrogen Sulfide, 20 PPM in Air 58 liters Hydrogen Sulfide, 25 PPM in Air, 58 liters Hydrogen Sulfide, 40 PPM in Air, 58 liters Hydrogen Sulfide, 50 PPM in Air, 58 liters Isobutylene, 5 PPM in Air, 103 liters

Page 38

Detcon Product Guide

942-523122-010 942-523122-025 942-523122-050 942-523122-500 942-520124-025 942-520124-050 942-520124-080 942-940212-025 942-640023-100 942-640212-005 942-521124-050 942-200212-0X5 942-522124-050 942-540212-005 942-540212-010 942-540212-025 942-540212-050 Isobutylene, 10 PPM in Air, 103 liters Isobutylene, 25 PPM in Air, 103 liters Isobutylene, 50 PPM in Air, 103 liters Isobutylene, 500 PPM in Air, 103 liters Methane, 25% LEL in Air, 103 liters Methane, 50% LEL in Air, 103 liters Methane, 80% LEL in Air, 103 liters Nitric Oxide, 25 PPM in Nitrogen, 58 liters Nitrogen, 99.99%, 103 liters Nitrogen Dioxide, 5 PPM in Nitrogen, 58 liters Pentane, 50% LEL in Air, 103 liters Phosphine, 0.5 PPM in Nitrogen, 58 liters Propane, 50% LEL in Air, 103 liters Sulfur Dioxide, 5 PPM in Nitrogen, 58 liters Sulfur Dioxide, 10 PPM in Nitrogen, 58 liters Sulfur Dioxide, 25 PPM in Nitrogen, 58 liters Sulfur Dioxide, 50 PPM in Nitrogen, 58 liters
Note: For gases or gas blends other than those listed, contact the Detcon sales department.

Section 5.3 Regulators and Other Component Parts

Part Number
943-090005-502 943-090005-510 943-001767-5RG 943-001781-5AM 943-090005-520 943-000006-038 943-000006-132 943-T02649-000 943-002401-000 985-241100-321 613-120000-700 600-610000-000 984-000000-000 984-200000-000 943-090092-032 943-000000-000

Model Number - Description

Regulator, fixed flow rate 200 milliliters Regulator, fixed flow rate 500 milliliters Regulator for highly reactive gases (CL2, HCl, HCN), fixed flow rate 500 ml Regulator for NH3, fixed flow rate 500 milliliters Regulator, fixed flow rate 1000 milliliters Calibration adapter, solid state H2S TP-424/524/624 Calibration adapter FP/IR/DM/O2/PI/TP-700 Calibration adapter, teflon for highly reactive gases (HCl, CL2, HCN, NH3) Calibration adapter, Detcon Model 200 In-line humidifying tube Sensor splash guard with integral cal-port - FP/DM/IR Sensor splash guard w/integral cal port TP-424/TP-524/TP-624 Clear vinyl tubing 1/4 OD (price per foot) Teflon tubing 1/4 OD (price per foot) Canvas carry bag with foam insert for 2 gas cylinders Calibration Sleeve/Wind Guard for splash guard

Page 39

Detcon Product Guide

Section 6.0 Special Application Products
Section 6.1 Wireless Network Transceivers and Gas Detection Products
Part Number
976-000300-000 976-000301-000 976-000302-000

Model Number - Description

Detcon Model RXT-300 Wireless Network Transceiver Detcon Model RXT-300 Wireless Network Transceiver with aluminum junction box and terminal board Detcon Model RXT-300 wireless network transceiver with stainless steel junction box and terminal board

Section 6.2 Junction Boxes and Instrument Enclosures

Part Number
897-850000-010 897-850901-010 897-850800-010 897-850500-010 897-850400-010 897-850000-316 897-850901-316 897-850801-316 897-850701-316 897-850401-316 897-860000-316 897-860800-316 897-860400-316

Model Number - Description

Standard aluminum junction box with solid lid Standard aluminum junction box with lens cover Standard aluminum junction box bottom Standard aluminum junction box glass lens top Standard aluminum junction box solid top Standard 316SS junction box with solid lid Standard 316SS junction box with lens cover Standard 316SS junction box bottom Standard 316SS junction box glass lens top Standard 316SS junction box solid top Mini 316SS junction box with solid lid Mini 316SS junction box bottom Mini 316SS junction box solid top

Page 40

Detcon Product Guide

Section 7.0 Process Analyzers
Section 7.1 H2S Analyzer - Complete Assemblies with Options (Option Pricing Additional, see below)
Part Number
952-053200-200 952-053200-700 952-053200-800 952-053H00-900 952-053H00-A00 952-053H00-B00 952-053H00-C00 952-053H00-Q00 952-053H00-500

Model Number - Description

Model 1000-H2S Manual Calibration Hydrogen Sulfide Process Analyzer 0-20 ppm, 24VDC/110VAC/220VAC Model 1000-H2S Manual Calibration Hydrogen Sulfide Process Analyzer 0-50 ppm, 24VDC/110VAC/220VAC Model 1000-H2S Manual Calibration Hydrogen Sulfide Process Analyzer 0-100 ppm, 24VDC/110VAC/220VAC Model 1000-H2S Manual Calibration Hydrogen Sulfide Process Analyzer 0-1000 ppm, 24VDC/110VAC/220VAC Model 1000-H2S Manual Calibration Hydrogen Sulfide Process Analyzer 0-2000 ppm, 24VDC/110VAC/220VAC Model 1000-H2S Manual Calibration Hydrogen Sulfide Process Analyzer 0-3000 ppm, 24VDC/110VAC/220VAC Model 1000-H2S Manual Calibration Hydrogen Sulfide Process Analyzer 0-1%, 24VDC/110VAC/220VAC Model 1000-H2S Manual Calibration Hydrogen Sulfide Process Analyzer 0-2%, 24VDC/110VAC/220VAC Model 1000-H2S Manual Calibration Hydrogen Sulfide Process Analyzer 0-5%, 24VDC/110VAC/220VAC

Consult factory for othe Consult factory for other ranges Options:
Non-Rated (NEMA 1) Enclosure (P/N xxx-1xxxxx-xxx) Add: $895.00 NEMA 4 Enclosure (P/N xxx -4xxxxx-xxx) Add $1,095.00 NEMA 4 Stainless Steel Enclosure (P/N xxx-5xxxxx-xxx) Add: $1,695.00 Air Flow Fault (P/N xxx-xxxxxx-xx2) Add: $225.00

Section 7.2 CO2 Analyzer - Complete Assemblies with Options (Option Pricing Additional, see below)
Part Number
952-054000-B00 952-054000-100 952-054000-300 952-054000-500 952-054200-400 952-054200-D00 952-054200-E00

Model Number - Description

Model 1000-CO2 Manual Calibration Carbon Dioxide Process Analyzer 0-3000ppm, 24VDC/110VAC/220VAC Model 1000-CO2 Manual Calibration Carbon Dioxide Process Analyzer 0-1%, 24VDC/110VAC/220VAC Model 1000-CO2 Manual Calibration Carbon Dioxide Process Analyzer 0-3%, 24VDC/110VAC/220VAC Model 1000-CO2 Manual Calibration Carbon Dioxide Process Analyzer 0-5%, 24VDC/110VAC/220VAC Model 1000-CO2 Manual Calibration Carbon Dioxide Process Analyzer 0-15%, 24VDC/110VAC/220VAC Model 1000-CO2 Manual Calibration Carbon Dioxide Process Analyzer 0-30%, 24VDC/110VAC/220VAC Model 1000-CO2 Manual Calibration Carbon Dioxide Process Analyzer 0-50%, 24VDC/110VAC/220VAC

Page 41

Detcon Product Guide

952-054200-F00 Model 1000-CO2 Manual Calibration Carbon Dioxide Process Analyzer 0-100%, 24VDC/110VAC/220VAC

Options: Non-Rated (NEMA 1) Enclosure (P/N xxx-1xxxxx-xxx) Add: $895.00 NEMA 4 Enclosure (P/N xxx -4xxxxx-xxx) Add $1,095.00 NEMA 4 Stainless Steel Enclosure (P/N xxx-5xxxxx-xxx) Add: $1,695.00 Sample Flow Fault (P/N xxx-xxxxxx-xx1) Add: $1,200.00

Section 7.3 H2S/CO2 Dual Analyzer - Complete Assemblies with Options

Part Number
952-053240-250 952-053H40-Q50

Model Number - Description

Model 1000-H2S/CO2 Manual Calibration Process Analyzer 0-20ppm H2S, 0-5% CO2, 24VDC/110VAC/220VAC Model 1000-H2S/CO2 Manual Calibration Process Analyzer 0-2% H2S, 0-5% CO2, 24VDC/110VAC/220VAC

* Consult factory for range specific P/N information

Section 7.4 Analyzer Spare Parts & Accessories

Part Number
399-800000-000 370-323200-000 370-3H3H00-000 327-000000-000 360-205421-024 500-005151-002 350-523081-02K 351-152021-400 360-2424TS-100 823-101085-882 823-101575-000 943-200000-000 350-300000-000 348-900000-000 926-015502-xxx

Model Number - Description

Solid state H2S gas sensor in stainless steel housing Electrochemical H2S plug-in detector assembly (100 ppm range) Electrochemical H2S plug-in detector assembly (1000 ppm range) Magnetic programming tool 24VDC Power supply Flow fault circuit assembly Mass flow controller Pump 24VDC field replacement assembly 24-24V DC to DC converter assembly Genie membrane filter Genie membrane filter kit 1000 carbon scrubber assembly 0.5 Lpm rotameter no valve 1 Lpm rotameter with valve Transmitter for H2S gas sensor. Last 3 digits are for range: 010=10ppm, 020=20ppm, 100=100ppm, 01K=1,000ppm, 03K=3,000ppm, 10K=10,000ppm, 15K=15,000ppm, 50K=50,000ppm Transmitter for Echem H2S gas sensor. Last 3 digits are for range: 010=10ppm, 020=20ppm, 100=100ppm, 01K=1,000ppm, 03K=3,000ppm, 10K=10,000ppm, 15K=15,000ppm, 50K=50,000ppm Low range CO2 plug-in optical replacement sensor High range CO2 plug-in optical replacement sensor Low range CO2 housing assembly (does not include plug-in Sensor) High range CO2 housing assembly (does not include plug-in Sensor) IR-640 transmitter module 0-5% Last 3 digits are for range: 0X3=3,000ppm, 0X5=5,000ppm, 001=1%, 005=5% IR-642 transmitter module 10-100% Last 3 digits are for range: 010=10%, 015=15%, 020=20%, 025=25%, 050=50%, 100-100% Connector board for CO2 sensors Connector board H2S sensors Single stage pressure regulator

926-245502-xxx

370-365878-111 370-287724-232 390-000088-000 390-000088-0HR 926-405502-xxx 926-425502-xxx 500-002042-000 500-001794-004 955-442260-241

Page 42

Detcon Product Guide

823-652236-000 823-657236-000 Genie probe with housing Genie probe regulator

Section 7.5 Span Gas Cylinders and Accessories

Part Number
942-001123-000 942-400122-02K 942-400123-2X5 942-400123-005 942-400123-010 942-010212-005 942-010212-010 942-010212-025 942-010212-050 942-640023-100 943-100050-000 955-442260-241

Model Number - Description

Zero Air, 103 liters Carbon Dioxide, 2000 PPM In Air, 103 liters Carbon Dioxide, 2.5% in Air, 103 liters Carbon Dioxide, 5% in Air, 103 liters Carbon Dioxide, 10% in Air, 103 liters Hydrogen Sulfide, 5 PPM In N2, 58 liters Hydrogen Sulfide, 10 PPM In N2, 58 liters Hydrogen Sulfide, 25 PPM In N2, 58 liters Hydrogen Sulfide, 50 PPM In N2, 58 liters Nitrogen, 99.99%, 103 liters Calibration Kit for single channel only (includes mounting bracket, 0.5 lpm regulator, 1/8 plumbing inter-connect) Single stage pressure regulator

Note: For gases or gas blends other than those listed, contact the Detcon sales department.

Section 7.6 Model P-1000-H2S Portable H2S Analyzer

Part Number
952-720100-200

Model Number - Description

Detcon Model P-1000-H2S Portable Hydrogen Sulfide Analyzer complete with data logger, logger software, built-in rechargeable batteries, and external battery charger (Requires an H2S Intelligent Sensor Module ISM and an H2S plug-in sensor)

7.6.1 Hydrogen Sulfide Intelligent Sensor Modules

Part Number
392-32240S-020 392-32240S-100 392-32240S-01K

Model Number - Description

H2S Intelligent Sensor Module 0-20 PPM without sensor H2S Intelligent Sensor Module 0-100 PPM without sensor H2S Intelligent Sensor Module 0-1000 PPM without sensor

7.6.2 Replacement Parts

Part Number
370-323200-000 922-9900P1-000 922-012006-000 922-012006-010 995-741470-420 327-000000-000 308-884138-200 823-600000-000 823-60RF00-000 600-002800-A00 308-091000-030 348-900000-000 322-000000-000 344-400000-000 975-P10110-240

Model Number - Description

Hydrogen Sulfide plug-in sensor Universal Transmitter Module Data Logger Module Data Logger Software Data logger cable Magnetic programming tool 3-way Valve Coalescent filter assembly Coalescent filter tube Sensor flow through sample chamber Pressure gauge, 0-30 PSI W/1/4 NPT male 1 LPM rotameter w/valve Power switch Sealed battery 110-240 VAC line power battery charger

Page 43

Detcon Product Guide

7.7 Item Code Configuration Sheet - Analyzers

Page 44

Detcon Product Guide

Section 8.0 Audio Visual Alarm Stations
Section 8.1 Non-Hazardous Duty, NEMA 4X Weatherproof, Light Industrial Environments
Part Number
978-13x000-0xx 978-23xx00-0xx

Model Number - Description

Model AV1-N4X, Single Siren, Single Strobe Model AV2-N4X, Single Siren, Dual Strobe

Complete the part number using the information below: Position 6 (xxx-xx_xxx-xxx) Color of 1st Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 9-Clear Position 7 (xxx-xxx_xx-xxx) Color of 2nd Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 9-Clear Position 11 (xxx-xxxxxx-x_x) Voltage Type: 7-VAC, 8-VDC Position 12 (xxx-xxxxxx-xx_) Voltage: 1-12VDC, 2-24VDC, 3-120VAC, 4-240VAC

8.1.1 Replacement Strobes

Part Number
354-4950x6-xxx Strobe

Model Number - Description

Complete the part number using the information below: Position 8 (xxx-xxxx_x-xxx) Color of Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 9-Clear Position 10, 11, 12 (xxx-xxxxxx-_ _ _) Voltage: 124-12 or 24VDC, 120-120VAC, 240-240VAC

8.1.2 Replacement Horns

Part Number
356-xxx003-xxx Horn

Model Number - Description

Complete the part number using the information below: Position 4, 5, 6 (xxx-_ _ _xxx-xxx) Type of Voltage: 350-VAC, 450-VDC Position 10, 11, 12 (xxx-xxxxxx-_ _ _) Voltage: 012-12VDC, 024-24VDC, 120-120VAC, 240-240VAC

Page 45

Detcon Product Guide

8.2 Hazardous Duty, Class I, Division 2, Heavy Industrial Environments, Continuous Tone Siren
Part Number
977-1Lx000-0Fx 977-2Lxx00-0Fx

Model Number - Description

Model AV1-C1D2C, Single Siren, Single Strobe Model AV2-C1D2C, Single Siren, Dual Strobe

Complete the part number using the information below: Position 6 (xxx-xx_xxx-xxx) Color of 1st Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 7-Magenta, 9-Clear Position 7 (xxx-xxx_xx-xxx) Color of 2nd Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 7-Magenta, 9-Clear Position 12 (xxx-xxxxxx-xx_) Voltage: 3-120VAC, 4-240VAC

8.2.1 Replacement Strobes

Part Number
354-1516x6-xxx Strobe

Model Number - Description

Complete the part number using the information below: Position 8 (xxx-xxxx_x-xxx) Color of Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 7-Magenta, 9-Clear Position 10, 11, 12 (xxx-xxxxxx-_ _ _) Voltage: 120-120VAC, 240-240VAC

8.2.2 Replacement Horns

Part Number
356-35W006-xxx Horn

Model Number - Description

Complete the part number using the information below: Position 10, 11, 12 (xxx-xxxxxx-_ _ _) Voltage: 120-120VAC, 240-240VAC

Page 46

Detcon Product Guide

Section 8.3 Hazardous Duty, Class I, Division 2, Heavy Industrial Enironments, Multitone Sirens
Part Number
977-1Lx000-03x 977-2Lxx00-03x

Model Number - Description

Model AV1-C1D2M, Single Siren, Single Strobe Model AV2-C1D2M, Single Siren, Dual Strobe

Complete the part number using the information below: Position 6 (xxx-xx_xxx-xxx) Color of 1st Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 7-Magenta, 9-Clear Position 7 (xxx-xxx_xx-xxx) Color of 2nd Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 7-Magenta, 9-Clear Position 12 (xxx-xxxxxx-xx_) Voltage: 2-24VDC, 3-120VAC, 4-240VAC

8.3.1 Replacement Strobes

Part Number
354-1516x6-xxx Strobe

Model Number - Description

Complete the part number using the information below: Position 8 (xxx-xxxx_x-xxx) Color of Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 7-Magenta, 9-Clear Position 10, 11, 12 (xxx-xxxxxx-_ _ _) Voltage: 124-24VDC, 120-120VAC, 240-240VAC

8.3.2 Replacement Horns

Part Number
356-889321-MV0

Model Number - Description

Horn (Multivolt 24VDC, 120VAC, 240VAC)

Page 47

Detcon Product Guide

Section 8.4 Hazardous Duty, Class I, Division 1, Heavy Industrial Enironments, Multitone Siren, Compliance with ABS Standards
Part Number
977-16x000-03x 977-26xx00-03x

Model Number - Description

Model AV1-C1D1M, Single Siren, Single Strobe Model AV2-C1D1M, Single Siren, Dual Strobe

Complete the part number using the information below: Position 6 (xxx-xx_xxx-xxx) Color of 1st Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 7-Magenta, 9-Clear Position 7 (xxx-xxx_xx-xxx) Color of 2nd Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 7-Magenta, 9-Clear Position 12 (xxx-xxxxxx-xx_) Voltage: 2-24VDC, 3-120VAC, 4-240VAC

8.4.1 Replacement Strobes

Part Number
354-3206x4-xxx

Model Number - Description

Strobe w/flange mount

Complete the part number using the information below: Position 8 (xxx-xxxx_x-xxx) Color of Strobe: 2-Red, 4-Amber, 5-Green, 6-Blue, 7-Magenta, 9-Clear Position 10, 11, 12 (xxx-xxxxxx-_ _ _) Voltage: 124-24VDC, 120-120VAC, 240-240VAC

8.4.2 Replacement Horns

Part Number
356-889321-MV0

Model Number - Description

Horn (Multivolt 24VDC, 120VAC, 240VAC)

Page 48