Scribd
Upload
61 views4 pages

15 Root Locus123

The root locus technique allows you to analyze how the closed-loop poles of a feedback system will change as the feedback gain (k) is varied from 0 to infinity. A root locus plot shows the trajectory that each closed-loop pole follows in the complex plane as k changes. The plot starts at the open-loop poles when k=0 and ends when the poles become unstable as k approaches infinity. Analyzing the root locus can help select an optimal k value to achieve desired closed-loop performance and stability.

Uploaded by

rjkadivar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views4 pages

15 Root Locus123

The root locus technique allows you to analyze how the closed-loop poles of a feedback system will change as the feedback gain (k) is varied from 0 to infinity. A root locus plot shows the trajectory that each closed-loop pole follows in the complex plane as k changes. The plot starts at the open-loop poles when k=0 and ends when the poles become unstable as k approaches infinity. Analyzing the root locus can help select an optimal k value to achieve desired closed-loop performance and stability.

Uploaded by

rjkadivar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Root Locus

Objectives:
Understand
With feedback, the poles of the closed-loop system shift
The shift is a well defined curve, termed a root locus plot
Definitions:
Assume a feedback system of the following form:

K G
U
Y R
where
k G(s) =

kz(s)
p(s)

Open-Loop Gain: k G(s)


Closed-Loop Gain:

kG
1+kG

Open-Loop Poles: solutions to p(s) =0


Open-Loop Zeros: solutions to z(s) =0.
Closed-Loop Poles: solutions to p(s) +kz(s) =0.
Root Locus: Plot of the closed-loop poles as k varies from 0 to infinity.
Background:
Feedback is a very useful method for controlling the output of a system. With feedback, it is much easier to
regulate the output and automatically compensate for disturbances, such as noise, aging, manufacturing variations,
etc. Feedback can also make a system behave worse - it can even make a system go unstable.
One property feedback has is that the dynamics of the closed-loop system change as you vary the feedback gain.
Root locus techniques allow you to
Predict how the closed-loop system will behave as you vary the feedback gain (k), and
Pick the 'best' value of k to get the 'best' response possible.
In addition, root locus techniques help provide insight as to how to improve the system's response with a
pre-filter.
What is a root locus plot
NDSU Root Locus ECE 461
J SG 1 rev October 5, 2007
Assume you have a unity feedback system as follows:
K G
U
Y R
where
KG =

kz(s)
p(s)

As you vary k from 0 to infinity, the dynamics of the closed-loop system will vary. The closed-loop system will
be
.

kG
1+kG

kz(s)
p(s)+kz(s)

The roots of the closed-loop system determine how the system will behave. Hence, we are interested in the
solutions to
p(s) + k z(s) = 0
A root locus plot is a plot of the solutions to p(s)+kz(s)=0 for 0<k< .
NDSU Root Locus ECE 461
J SG 2 rev October 5, 2007
Example: Plot the root locus of
kG(s) =

k
s(s+2)(s+5)

or, equivalently, the solution to


s(s + 2)(s + 5) + k = 0
Using MATLAB to do this with 1000 values of k results in the following plot:

Note the following:
The roots follow a well defined path
At k=0, the root locus starts at the poles of the open-loop system (0, -2, -5)
As k increases, the roots slide together
As k increases further the poles become complex
As k gets really large, the poles go into the right half plane and the system becomes unstable.
This root locus plot is essentially your shopping list: you can place the closed-loop poles anywhere on the above
root locus plot. If you pick a point on the root locus plot, there is a gain, k, which results in that solution. If you
pick a point off the root locus plot, however, there is no solution for k.
NDSU Root Locus ECE 461
J SG 3 rev October 5, 2007
Example: Plot the root locus for the following system
G =

10
s(s+2)(s+4)(s+5)

or equivalently, the roots of


s(s + 2)(s + 4)(s + 5) + 10k = 0
Solution: Picking 1000 points for k results in the following root locus plot
Note again:
The roots follow a well defined path
At k=0, the root locus starts at the poles of the open-loop system (0, -2, -4, -5)
As k increases, the roots slide together
As k increases further the poles become complex
As k gets really big, two of the poles become unstable
NDSU Root Locus ECE 461
J SG 4 rev October 5, 2007

You might also like