Scribd
Upload
45 views1 page

Section 05 - RB 9

The document contains two tables listing specifications for ductile iron mechanical joint fittings. Table 5-7 provides dimensions, pressure ratings, and weights for MJ and MJ fittings in sizes 4 to 48 inches. Table 5-8 provides the same for compact fittings in sizes 4 to 24 inches, noting they comply with AWWA C153 standards. Both tables refer to general notes on page 5-2 for additional information.

Uploaded by

sanshinde10
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views1 page

Section 05 - RB 9

The document contains two tables listing specifications for ductile iron mechanical joint fittings. Table 5-7 provides dimensions, pressure ratings, and weights for MJ and MJ fittings in sizes 4 to 48 inches. Table 5-8 provides the same for compact fittings in sizes 4 to 24 inches, noting they comply with AWWA C153 standards. Both tables refer to general notes on page 5-2 for additional information.

Uploaded by

sanshinde10
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

5-8

30 250* .66 6.75 15.75 665 600


36 250* .74 7.75 16.75 960 865
42 250* .82 9.0 18.0 1350 1200
48 250* .90 10.0 19.0 1760 1575
See General Notes on page 5-2.
Table No. 5-7
MJ and MJ
T
A A
R
T
A
R
S
MJ and PE
Size
in.
Pressure
Rating
psi
T A S R MJ & MJ MJ & PE
4 350 .52 4.0 12.0 10.06 50 45
6 350 .55 5.0 13.0 15.06 75 70
8 350 .60 5.5 13.5 17.62 110 105
10 350 .68 6.5 14.5 22.62 160 160
12 350 .75 7.5 15.5 27.62 220 220
14 350 .66 7.5 15.5 25.12 275 260
16 350 .70 8.0 16.0 27.62 345 325
18 350 .75 8.5 16.5 30.19 430 405
20 350 .80 9.5 17.5 35.19 535 505
24 350 .89 11.0 19.0 37.69 765 725
30 250 1.03 15.0 23.0 57.81 1400 1295
36 250 1.15 18.0 26.0 72.88 2135 1970
42 250 1.28 21.0 29.0 88.00 3020 2810
48 250 1.42 24.0 32.0 103.06 4170 3905
Dimensions in Inches Weight in Pounds
AWWA C110
*Based on performance testing per AWWA C153, AMERICAN can rate these fittings 350 psi. However, because of
the more labor-intensive and labor-reliant assembly of the MJ joint and the substantial thrust restraint require-
ments for working pressures that high, we recommend push-on joint configurations (Fastite, Flex-Ring and
Lok-Ring) for high pressure applications.
See General Notes on page 5-2.
Table No. 5-8
4 350 .34 1.5 7.0 17 21
6 350 .36 2.0 7.5 33 37
8 350 .38 2.5 8.0 44 51
10 350 .40 3.0 8.5 64 67
12 350 .42 3.5 9.0 85 80
14 350 .47 3.75 11.25 148 152
16 350 .50 3.75 11.75 179 181
18 350 .54 4.5 12.5 292 290
20 350 .57 4.5 12.5 364 345
24 350 .61 4.5 12.5 385 455
Size
in.
Pressure
Rating
psi T
nom.
A
min.
S
min.
MJ & MJ MJ & PE
Dimensions in Inches Weight in Pounds
AWWA C153 - Compact
AMERICAN Ductile Iron Mechanical Joint Fittings
ANSI/AWWA C110/A21.10 and C153/A21.53
22
1
2 Bends (1/16
th
)

You might also like