Lenovo G700/G710

Read the safety notices and important tips in the

included manuals before using your computer.

L
e
n
o
v
o

C
h
i
n
a

2
0
1
3
User Guide
en-US
Rev. AA00
First Edition (March 2013)
Copyright Lenovo 2013.
Before using the product, be sure to read Lenovo Safety and General
Information Guide rst.
The features described in this guide are common to most models.
Some features may not be available on your computer or your
computer may include features that are not described in this user
guide.
Some instructions in this guide may assume that you are using
Windows

8. If you are using other Windows operating system, some

operations may be slightly different. If you are using other operating
systems, some operations may not apply to you.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General
Services Administration GSA contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.
Notes

To learn more about Lenovo Applications, go to: http://www.lenovo.com.

The illustrations in this manual may differ from the actual product.
Please refer to the actual product.
The illustrations used in this manual are for Lenovo G700 unless
otherwise stated.

i
Chapter 1. Getting to know your computer .......................................... 1
Top view ........................................................................................................................1
Left-side view ................................................................................................................7
Right-side view............................................................................................................11
Front view....................................................................................................................12
Bottom view.................................................................................................................13
Chapter 2. Starting to use Windows 8 ................................................ 14
Configuring the operating system for the first time.....................................................14
Operating system interfaces .........................................................................................14
The charms...................................................................................................................15
Putting the computer to sleep or shutting it down .......................................................17
Connecting to wireless LAN........................................................................................19
Help and support ..........................................................................................................20
Chapter 3. Lenovo OneKey Recovery System................................... 21
Chapter 4. Troubleshooting................................................................. 22
Frequently asked questions ..........................................................................................22
Troubleshooting ...........................................................................................................24
Appendix A. CRU instructions............................................................. 28
Replacing the battery pack...........................................................................................28
Replacing the hard disk drive.......................................................................................29
Replacing memory .......................................................................................................33
Replacing the wireless LAN card ................................................................................36
Removing the optical drive..........................................................................................38
Trademarks............................................................................................ 40
Contents
1
Chapter 1. Getting to know your computer
Top view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Note: The dashed areas indicate parts that are not visible externally.
Attention:
Do not open the display panel beyond 130 degrees. When closing the display panel, be
careful not to leave pens or any other objects in between the display panel and the
keyboard. Otherwise, the display panel may be damaged.
1
7
8
3
6
5
2
4

2
Chapter 1. Getting to know your computer
Integrated
camera
Use the camera for video communication.
Wireless module
antennas (on
select models)
The built-in antennas ensure optimal reception of wireless
radio.
Computer display Provides brilliant visual output.
Speakers The stereo speakers provide rich and powerful sound.
Note: For sound effects and speaker locations specific to your model, refer to the actual product.
Novo button When the computer is off or in hibernation mode, press
this button to start the Lenovo OneKey Recovery System
or the BIOS setup utility, or to enter the boot menu.
Note: For details, see Lenovo OneKey Recovery System on page 21.
Power button Press this button to turn on the computer.
Built-in
microphone
(with noise
reduction)
Captures sound which can be used for video conferencing,
voice narration, or audio recording.
Touch pad The touch pad functions as a conventional mouse.
Touch pad: To move the pointer on the screen, slide your
fingertip over the pad in the direction in which you want
the pointer to move.
Touch pad buttons: The functions of the left/right side
correspond to that of the left/right mouse button on a
conventional mouse.
Note: You can enable/disable the touch pad by pressing .
a
b
c
d
e
f
g
h
Chapter 1. Getting to know your computer
3
Using the keyboard
Your computer has a numeric keypad and function keys incorporated in its
standard keyboard.
Numeric keypad
The keyboard has a separate numeric keypad. To enable or disable the
numeric keypad, press the Num Lock key.
4
Chapter 1. Getting to know your computer
Function key combinations
Through the use of the function keys, you can change operational features
instantly. To use this function, press and hold Fn ; then press one of the
function keys .
The following describes the features of each function key.
Fn + Home: Activates the pause function.
Fn + End: Activates the break function.
Fn + PgUp: Enables/disables the scroll lock.
Fn + PgDn: Activates the system request.
a
b

Chapter 1. Getting to know your computer

5
Hotkeys
You can access certain system settings quickly by pressing the appropriate
hotkeys.
:
Mutes/unmutes the sound.
:
Enables/disables Airplane
mode.
:
Decreases the volume level.
:
Displays all currently active
apps.
:
Increases the volume level.
:
Turns on/off the backlight of
the LCD screen.
:
Closes the currently active
window.
:
Toggles the display between
the computer and an external
device.
:
Refreshes the desktop or the
currently active window.
:
Decreases the display
brightness.
:
Enables/disables the touch
pad.
:
Increases the display
brightness.
6
Chapter 1. Getting to know your computer
Setting hotkey mode
By default, the hotkey functions are accessible by pressing the appropriate
hotkey. However, you can disable the hotkey mode in the BIOS setup utility.
To disable the hotkey mode:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup.
3 In the BIOS setup utility, open the Configuration menu, and change the
setting of HotKey Mode from Enabled to Disabled.
4 Open the Exit menu, and select Exit Saving Changes.
Note: When hotkey mode is disabled, press the Fn key and the appropriate hotkey to
access the corresponding hotkey function.
Chapter 1. Getting to know your computer
7
Left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
AC power
adapter jack
Connect the AC power adapter here.
Ventilation slots Dissipate internal heat.
Note: Make sure that the ventilation slots are not blocked or else the computer may
overheat.
VGA port
Connects to external display devices.
HDMI port Connects to devices with HDMI input such as a TV or an
Ethernet display.
RJ-45 port Connects the computer to an Ethernet network.
USB port Connects to USB devices.
Notes:
The blue ports are USB 3.0 ports. The black ports are USB 2.0 ports.
For details, see Connecting USB device on page 9.
Memory card slot Insert memory cards (not supplied) here.
Note: For details, see Using memory cards (not supplied) on page 8.
1 3 2 4 6 7 5
a
b
c
d
e
f
g
8
Chapter 1. Getting to know your computer
Using memory cards (not supplied)
Your computer supports the following types of memory cards:
Secure Digital (SD) card
MultiMediaCard (MMC)
Inserting a memory card
1 Push the dummy card in until you hear a click.
2 Gently pull the dummy card out of the memory card slot.
3 Slide the memory card in until it clicks into place.
Removing a memory card
1 Push the memory card in until you hear a click.
2 Gently pull the memory card out of the memory card slot.
Notes:
Insert only one card in the slot at a time.
This card reader does not support SDIO devices (e.g., SDIO Bluetooth and so on.).
Note: The dummy card is used for preventing dust and small particles from entering the
inside of your computer when the memory card slot is not in use. Retain the dummy
card for future use.
Note: Select models may not include a dummy card. You can insert a memory card into the
slot directly.
Note: Before removing the memory card, disable it by using the Windows safely remove
hardware and eject media utility to avoid data corruption.
Chapter 1. Getting to know your computer
9
Connecting USB device
Your computer comes with three USB ports compatible with USB devices.
The first time you plug a USB device into a particular USB port on your
computer, Windows automatically installs a driver for that device. After the
driver has been installed, you can disconnect and reconnect the device
without performing any additional steps.
Before disconnecting a USB storage device, make sure your computer has
finished transferring data to that device. Click the Safely Remove Hardware
and Eject Media icon in the Windows notification area to remove the device
before disconnecting.
Note: Typically, Windows detects a new device after it has been connected, and then installs
the driver automatically. However, some devices may require you to install the driver
before connecting. Check the documentation provided by the devices manufacturer
before connecting the device.
Note: If your USB device uses a power cord, connect the device to a power source before
connecting it. Otherwise, the device may not be recognized.
10
Chapter 1. Getting to know your computer
Connecting a Bluetooth device (on select models)
If your computer has an integrated Bluetooth adapter card, it can connect to
and transfer data wirelessly to other Bluetooth enabled devices, such as
notebook computers, PDAs and cell phones. You can transfer data between
these devices up to 10 meters range in open space.
Enabling Bluetooth communications on your computer
Press to make configuration.
Note: The actual maximum range may vary due to interference and transmission barriers.
For best transfer speed, place the device as near your computer as possible.
Notes:
When you do not need to use the Bluetooth function, turn it off to save battery power.
You need to pair the Bluetooth enabled device with your computer before you can
transfer data between them. Read the documentation supplied with the Bluetooth
enabled device for details on how to pair the device with your computer.
Chapter 1. Getting to know your computer
11
Right-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Combo audio
jack
Connects to headset.
Notes:
The combo audio jack does not support conventional microphones by default.
The recording function may not be supported if third-party headphones or headsets are
connected, due to different industry standards.
USB port Connects to USB devices.
Notes:
The blue ports are USB 3.0 ports. The black ports are USB 2.0 ports.
For details, see Connecting USB device on page 9.
Optical drive (on
select models)
Reads/Burns optical discs.
Kensington lock
slot
Attach a security lock (not supplied) here to help protect
your computer from theft and unauthorized use.
You can attach a security lock to your computer to help
prevent it from being removed without your permission.
For details on installing the security lock, please refer to
the instructions shipped with the security lock that you
have purchased.
Notes:
Before purchasing any security product, verify that it is compatible with this type of
security keyhole.
You are responsible for evaluating, selecting, and implementing the locking devices and
security features. Lenovo offers no comment judgment or warranty regarding the
function, quality or performance of locking devices and security features.
1 2 3 4
a
b
c
d
12
Chapter 1. Getting to know your computer
Front view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
System status
indicators
Power indicator
Battery status indicator
Caps lock indicator
1
a
Chapter 1. Getting to know your computer
13
Bottom view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Battery pack
latch -manual
The manual battery pack latch is used to keep the battery
pack secured in place.
Battery pack
Battery pack
latch - spring
loaded
The spring-loaded battery pack latch keeps the battery
pack secured in place.
Optical drive/
Hard disk drive
(HDD)/Memory/
CPU (Central
processing unit)/
Mini PCI Express
Card slot
compartment
1 3 4 2
a
b
c
d
14
Chapter 2. Starting to use Windows 8
Configuring the operating system for the first time - - - - - - - - - - - - -
You may need to configure the operating system when it is first used. The
configuration process may include the procedures below:
Accepting the end user license agreement
Configuring the internet connection
Registering the operating system
Creating a user account
Operating system interfaces - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Windows 8 comes with two main User Interfaces: the Start screen and the
desktop.
To switch from the Start screen to the desktop, do one of the following:
Select the desktop tile on the Start screen.
Press Windows key + D.
To switch from the desktop to the Start screen, do one of the following:
Select Start from the charms.
Move the pointer to the lower-left corner and then select the Start screen
thumbnail when it is displayed.
Start screen Desktop
Chapter 2. Starting to use Windows 8
15
The charms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The five charms provide new and faster ways to perform many basic tasks,
and are always available regardless of which app you are currently in.
To display the charms, do one of the following:
Move the pointer to the upper-right or lower-right corner until the charms
bar is displayed.
Press Windows key + C.
Search charm
The Search charm is a powerful new way to find whatever you are looking
for, including apps, settings and files.
16
Chapter 2. Starting to use Windows 8
Share charm
The Share charm lets you send links, photos, and more to your friends and
social networks without leaving the app you are in.
Start charm
The Start charm is a fast way to go to the Start screen.
Devices charm
The Devices charm allows you to connect or send files to any external
devices, such as digital cameras, TVs, or printers.
Settings charm
The Settings charm lets you perform basic tasks, such as setting the volume
or shutting down the computer. Also, you can get to the Control Panel
through the Settings charm when using the desktop screen.
Chapter 2. Starting to use Windows 8
17
Putting the computer to sleep or shutting it down - - - - - - - - - - - - - - -
When you have finished working with your computer, you can put it to sleep
or shut it down.
Putting your computer to sleep
If you will be away from your computer for a short time, put the
computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use,
bypassing the startup process.
To put the computer to sleep, do one of the following:
Close the display panel.
Press the Power button.
Open the charms and then select Settings Power Sleep.
To wake the computer, do one of the following:
Press the Power button.
Press any key on the keyboard.
Note: Wait until the power indicator light starts blinking (indicating that the computer is
in sleep mode) before you move your computer. Moving your computer while the
hard disk is spinning can damage the hard disk, causing loss of data.
18
Chapter 2. Starting to use Windows 8
Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down your computer:
1 Open the charms, and then select Settings .
2 Select Power Shut down.
Chapter 2. Starting to use Windows 8
19
Connecting to wireless LAN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Enabling wireless connection
If Airplane mode is on, do one of the following to enable the wireless
function:
Press to disable Airplane mode.
Open the charms, and select Settings to open the Network
configuration page, and then toggle Airplane mode switch to Off.
Connecting to a wireless LAN
After wireless has been enabled, the computer will automatically scan for
available wireless networks and display them in the wireless LAN network list.
To connect to a wireless network, click the network name in the list, and then
click Connect.
Note: Some networks require a network security key or passphrase for connection. To connect
to one of those networks, ask the network administrator or the Internet Service Provider
(ISP) for the security key or passphrase.
20
Chapter 2. Starting to use Windows 8
Help and support - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you have any problems using the operating system, see the Windows Help
and Support file.
To open the Windows Help and Support file, do one of the following:
Select the Settings charm, then select Help.
Press Windows key + Fn + F1.
You can read the Windows Help and Support file on your computer. You can
also get online help and support by clicking the link listed under More to
explore.
21
Chapter 3. Lenovo OneKey Recovery System
The Lenovo OneKey Recovery System is software designed to back up and
restore your computer. You can use it to restore the system partition to its
original status in case of a system failure. You can also create user backups
for easy restoration as required.
Backing up the system partition
You can back up the system partition to an image file. To back up the system
partition:
1 Press the Novo button to start the Lenovo OneKey Recovery System.
2 Click System Backup.
3 Select a back-up location and click Next to start the backup.
Restoring
You can choose to restore the system partition to its original status or to a
previously created back-up point. To restore the system partition:
1 Press the Novo button to start the Lenovo OneKey Recovery System.
2 Click System Recovery. The computer will restart to the recovery environment.
3 Follow the on-screen instructions to restore the system partition to its original
status or to a previously created back-up point.
If Windows cannot be started, then follow the steps below to start the Lenovo
OneKey Recovery System:
1 Shut down the computer.
2 Press the Novo button. From the Novo button menu, select the Lenovo
OneKey Recovery System and press Enter.
Note: To utilize the features of the OneKey Recovery System, your hard disk already
includes a hidden partition by default to store the system image file and the OneKey
Recovery System program files. This default partition is hidden for security reasons,
which explains why the available disk space is less than the stated capacity.
Notes:
You can choose a back-up location on the local hard disk drive or an external storage device.
Remove the removable hard disk drive before starting the Lenovo OneKey Recovery System.
Otherwise, data from the removable hard disk drive might be lost.
The back-up process may take a while.
The back-up process is only available when Windows can be started normally.
Notes:
The recovery process is irreversible. Make sure to back up any data you wish to save on
the system partition before starting the recovery process.
The recovery process may take a while. So be sure to connect the AC power adapter to
your computer during the recovery process.
The above instructions should be followed when Windows can be started normally.
22
Chapter 4. Troubleshooting
Frequently asked questions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This section lists frequently asked questions by category.
Finding information
What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your
computer contains safety precautions for using your computer. Read and
follow all the precautions when using your computer.
Where can I find the hardware specifications for my computer?
You can find the hardware specification for your computer on the printed
flyers which came with your computer.
Where can I find warranty information?
For the warranty applicable to your computer, including the warranty
period and type of warranty service, see the Lenovo limited warranty flyer
that came with your computer.
Drivers and preinstalled software
Where are the installation discs for Lenovo preinstalled software (desktop
software)?
Your computer did not come with installation discs for Lenovo preinstalled
software. If you need to reinstall any preinstalled software, you can find
the installation program on the D partition of your hard disk. If you cannot
find the installation program there, you can also download it from the
Lenovo consumer support website.
Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, Lenovo
provides drivers for all the hardware devices that you need on the D
partition of your hard disk. You can also download the latest device drivers
from the Lenovo consumer support website.
Lenovo OneKey Recovery System
Where are the recovery discs?
Your computer did not come with any recovery discs. Use the Lenovo
OneKey Recovery System if you need to restore the system to its original
factory status.
Chapter 4. Troubleshooting
23
What can I do if the back-up process fails?
If you can start the backup but it fails during the back-up process, try the
following steps:
1 Close all open programs, and then restart the back-up process.
2 Check to see if the destination media is damaged. Select another path and
then try again.
When do I need to restore the system to its factory status?
Use this feature when the operating system fails to start up. If there is
critical data on the system partition, back it up before starting recovery.
BIOS setup utility
What is the BIOS setup utility?
The BIOS setup utility is a ROM-based software. It displays basic computer
information and provides options for setting boot devices, security,
hardware mode, and other preferences.
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup.
How can I change the boot mode?
There are two boot modes: UEFI and Legacy Support. To change the boot
mode, start the BIOS setup utility and set boot mode to UEFI or Legacy
support on the boot menu.
When do I need to change the boot mode?
The default boot mode for your computer is UEFI mode. If you need to
install a legacy operating system, such as Windows, Linux or Dos, etc (that
is, any operating system before Windows 8) on your computer, you must
change the boot mode to Legacy support. The legacy operating system,
such as Windows, Linux or Dos, etc cannot be installed if you don't change
the boot mode.
Getting help
How can I contact the customer support center?
See "Chapter 3. Getting help and service" in the Lenovo Safety and General
Information Guide.
24
Chapter 4. Troubleshooting
Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Display problems
When I turn on the computer,
nothing appears on the screen.
If the screen is blank, make sure that:
- The battery pack is installed correctly.
- The AC power adapter is connected to the computer, and
the power cord is plugged into a working electrical outlet.
- The computer power is on. (Press the Power button again
for confirmation.)
- The memory is installed correctly.
If these items are properly set, and the screen remains blank,
have the computer serviced.
When I turn on the computer,
only a white cursor appears on
a blank screen.
Restore backed-up files to your Windows environment or
the entire contents of your hard disk to its original factory
contents using the Lenovo OneKey Recovery System. If you
still see only the cursor on the screen, have the computer
serviced.
The screen goes blank while
the computer is on.
Your screen saver or power management may be enabled.
Do one of the following to exit from the screen saver or to
resume from sleep mode:
- Touch the touch pad.
- Press any key on the keyboard.
- Press the Power button.
- Press F9( ) to confirm whether the backlight of the
LCD screen has been turned off.
BIOS password problems
I forgot my password. If you forget your user password, ask the system
administrator to clear your user password.
If you forget your hard disk drive password, a Lenovo
authorized servicer cannot reset your password or recover
data from the hard disk. You must take your computer to a
Lenovo authorized servicer or a marketing representative to
have the hard disk drive replaced. Proof of purchase is
required, and a fee will be charged for parts and service.
If you forget your supervisor password, a Lenovo
authorized servicer cannot reset your password. You must
take your computer to a Lenovo authorized servicer or a
marketing representative to have the system board
replaced. Proof of purchase is required, and a fee will be
charged for parts and service.
Chapter 4. Troubleshooting
25
Sleep problems
The critical low-battery error
message appears, and the
computer immediately turns off.
The battery power is getting low. Connect the AC power
adapter to the computer, or replace the battery pack with a
fully charged one.
The computer enters sleep
mode immediately after Power-
on self-test (POST).
Make sure that:
- The battery pack is charged.
- The operating temperature is within the acceptable range.
See Chapter 2. Use and care Information in the Lenovo
Safety and General Information Guide.
Note: If the battery pack is charged and the temperature is within range, have the computer serviced.
The computer does not return
from sleep mode, and the
computer does not work.
If your computer is in sleep mode, connect the AC power
adapter to the computer, then press any key or the Power
button.
If the system still does not return from sleep mode, stops
responding, or cannot be turned off, reset the computer.
Unsaved data may be lost. To reset the computer, press and
hold the Power button for four seconds or more. If the
computer is still not reset, remove the AC power adapter
and the battery pack.
Display panel problems
The screen is blank. Do the following:
- If you are using the AC power adapter or the battery pack,
and the battery status indicator is on, press F12( ) to
make the screen brighter.
- If the power indicator is blinking, press the Power button
to resume from sleep mode.
- If the problem persists, follow the solution in the next
problem The screen is unreadable or distorted.
- Press F9( ) to confirm whether the backlight of the
LCD screen has been turned off.
The screen is unreadable or
distorted.
Make sure that:
- The display device driver is installed correctly.
- The screen resolution and color quality are correctly set.
- The monitor type is correct.
Incorrect characters appear on
the screen.
Are the operating system or programs installed correctly?
If they are installed and configured correctly, have the
computer serviced.
26
Chapter 4. Troubleshooting
Sound problems
No sound can be heard from
the speaker even when the
volume is turned up.
Make sure that:
- The Mute function is off.
- The combo audio jack is not being used.
- Speakers are selected as the playback device.
Battery pack problems
Your computer shuts down
before the battery status
indicator shows empty.
-or-
Your computer operates after
the battery status indicator
shows empty.
Discharge and recharge the battery pack.
The computer does not operate
with a fully charged battery
pack.
The surge protector in the battery pack might be active.
Turn off the computer for one minute to reset the protector;
then turn on the computer again.
A hard disk drive problem
The hard disk drive does not
work.
Make sure that the hard disk drive is included in the Boot
menu in the BIOS setup utility correctly.
OneKey Recovery System problems
Backup cannot be made. Make sure that you are currently using a Windows
operating system.
There may not be enough space to store the backed-up data.
You will need to free more hard disk space on your backup's
partition.
Failure to restore system
partition to factory default.
The system partition (e.g. the partition size or the drive
capacity of C) has been modified.
Chapter 4. Troubleshooting
27
Other problems
Your computer does not
respond.
To turn off your computer, press and hold the Power button for
four seconds or more. If the computer still does not respond,
remove the AC power adapter and the battery pack.
Your computer might lock when it enters sleep mode
during a communication operation. Disable the sleep timer
when you are working on the network.
The computer does not start
from a device you want.
See the Boot menu of the BIOS setup utility. Make sure that
the BIOS setup utility is set so that the computer starts from
the device you want.
Also make sure that the device from which the computer
starts is enabled. Make sure that the device is included in
the Boot menu in the BIOS setup utility correctly.
While turned off, press the Novo button to select the device
you want the computer to start from.
The connected external device
does not work.
Do not connect or disconnect any external device cables
other than USB while the computer power is on. Otherwise,
you might damage your computer.
When using high power consumption external devices such
as an external USB optical disk drive, use an external device
power adapter. Otherwise, the device may not be
recognized, or the system may shut down as a result.
28
Appendix A. CRU instructions
Replacing the battery pack - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the battery pack, do the following:
1 Turn off the computer. Disconnect the AC power adapter and all cables
from the computer.
2 Close the computer display and turn the computer over.
3 Unlock the manual battery pack latch . While holding the spring-loaded
battery pack latch in the unlocked position , remove the battery pack
in the direction shown by the arrow .
4 Install a fully charged battery pack.
5 Slide the manual battery pack latch to the locked position.
6 Turn the computer over again.
7 Connect the AC power adapter and the cables to the computer.
Notes:
The illustrations used in this appendix are for the Lenovo G700, unless otherwise stated.
The following steps about upgrading and replacing devices are the same for the Lenovo G700/G710.
Make sure the battery pack has been removed before replacing any devices.
Note: Use only the battery pack provided by Lenovo. Any other battery pack could ignite or
explode.
a
b
c
1
2
3
Appendix A. CRU instructions
29
Replacing the hard disk drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
You can increase the storage capacity of your computer by replacing the hard
disk drive with one of greater capacity. You can purchase a new hard disk
drive from your reseller or Lenovo marketing representative.
The drive is very sensitive. Incorrect handling can cause damage and
permanent loss of data on the hard disk. Before removing the hard disk
drive, make a backup copy of all the information on the hard disk, and then
turn the computer off. Never remove the drive while the system is operating
or in sleep mode.
Notes:
Replace the hard disk drive only if you upgrade it or have it repaired. The connectors and
bay of the hard disk drive were not designed for frequent changes, or drive swapping.
The preinstalled softwares are not included on an optional hard disk drive.
Handling a hard disk drive
Do not drop the drive or subject it to physical shocks. Put the drive on a material,
such as soft cloth, that absorbs the physical shock.
Do not apply pressure to the cover of the drive.
Do not touch the connector.
30
Appendix A. CRU instructions
To replace the hard disk drive, do the following:
1 Turn off the computer. Disconnect the AC power adapter and all cables
from the computer.
2 Close the computer display and turn the computer over.
3 Remove the battery pack.
4 Remove the Optical drive/Hard disk drive/Memory/Central processing
unit/Mini PCI Express Card slot compartment cover.
a. Remove the screws that secure the compartment cover .
b.Remove the compartment cover .
a
b
1
1
2
2
Appendix A. CRU instructions
31
5 Remove the frame fixing screws .
6 Pull the hard disk drive tab in the direction shown by arrow .
c
3
3
3
3
d
4
32
Appendix A. CRU instructions
7 Take out the hard disk drive secured in a metal frame .
8 Remove the screws and detach the metal frame from the hard disk drive.
9 Attach the metal frame to a new hard disk drive and tighten the screws.
0 Put the hard disk drive gently into the hard disk drive bay with the tab
facing upwards and the connectors facing each other; then push it firmly
into space.
A Reinstall the frame fixing screws.
B After aligning the attachment clips with their matching gaps, reinstall the
compartment cover.
C Reinstall and tighten the screws.
D Reinstall the battery pack.
E Turn the computer over again.
F Connect the AC power adapter and the cables to the computer.
e
5
Appendix A. CRU instructions
33
Replacing memory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
You can increase the amount of memory in your computer by installing a
double-data-rate three synchronous dynamic random access memory (DDR3
SDRAM)-available as an option-in the memory slot of your computer. DDR3
SDRAMs are available in various capacities.
To install a DDR3 SDRAM, do the following:
1 Touch a metal table or a grounded metal object to reduce any static elec-
tricity in your body, which could damage the DDR3 SDRAM. Do not
touch the contact edge of the DDR3 SDRAM.
2 Turn off the computer. Disconnect the AC power adapter and all cables
from the computer.
3 Close the computer display and turn the computer over.
4 Remove the battery pack.
5 Remove the Optical drive/Hard disk drive/Memory/Central processing
unit/Mini PCI Express Card slot compartment cover.
Notes:
Use only the memory types supported by your computer. If you incorrectly install optional
memory, or install an unsupported memory type, a warning beep will sound when you try
to start the computer.
Select models of the computer may have only one memory slot. Refer to the actual product.
However, the procedure for replacing the memory is the same as listed below.
34
Appendix A. CRU instructions
6 Remove the DDR3 SDRAM by pressing out on the latches on both edges
of the socket at the same time. Be sure to save the old DDR3 SDRAM for
future use.
7 Align the notch of the DDR3 SDRAM with the protrusion of the socket
and gently insert the DDR3 SDRAM into the socket at a 30-45 angle.
8 Push the DDR3 SDRAM inward toward the socket until the latches on
both edges of the socket are pushed into the closed position.
9 After aligning the attachment clips with their matching gaps, reinstall the
compartment cover.
0 Reinstall and tighten the screws.
A Reinstall the battery pack.
B Turn the computer over again.
C Connect the AC power adapter and the cables to the computer.
2
1
1
1
2
Appendix A. CRU instructions
35
To make sure that the DDR3 SDRAM is installed correctly, do as follows:
1 Turn the computer on.
2 Hold F2 during startup. The BIOS setup utility screen opens. The System
Memory item shows the total amount of memory installed in your
computer.
Note: If only one DDR3 SDRAM is used on the computer you are servicing, the card must be
installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot).
b
a
36
Appendix A. CRU instructions
Replacing the wireless LAN card - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the wireless LAN card, do the following:
1 Turn off the computer; then disconnect the AC power adapter and all
cables from the computer.
2 Close the computer display, and then turn the computer over.
3 Remove the battery pack.
4 Remove the Optical drive/Hard disk drive/Memory/Central processing
unit/Mini PCI Express Card slot compartment cover.
5 Disconnect the two wireless LAN cables (one black, one white) .
6 Remove the screw that secures the wireless LAN card .
Note: The wireless LAN card in select models may have only one cable (black).
a
1
b
2
Appendix A. CRU instructions
37
7 Take out the wireless LAN card .
8 Install the new wireless LAN card.
9 Reinstall and tighten the screw.
0 Reconnect the two wireless LAN cables (one black, one white).
A Reinstall the compartment cover and tighten the screws.
B Reinstall the battery pack.
C Turn the computer over again.
D Connect the AC power adapter and the cables to the computer.
Note: When installing or reinstalling the wireless card:
In models with a wireless LAN card that has two cables:
Plug the black cable (MAIN) into the jack labeled M(Main).
Plug the white cable (AUX) into the jack labeled A(Aux).
In models with a wireless LAN card that has only one cable, plug the black cable
(MAIN) into the jack labeled M(Main).
c
3
38
Appendix A. CRU instructions
Removing the optical drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To remove the optical drive, do the following:
1 Remove the Optical drive/Hard disk drive/Memory/Central processing
unit/Mini PCI Express Card slot compartment cover.
2 Remove the screw shown in the illustration .
3 Gently pull the optical drive out .
a
b
1
2
Appendix A. CRU instructions
39
The following table provides a list of CRUs (Customer Replaceable Units) for
your computer and informs you of where to find replacement instructions.
Setup Poster User Guide
AC power adapter O
Power cord for AC power adapter O
Battery pack O O
Bottom access doors O
Hard disk drive O
Memory O
Wireless LAN card O
Optical drive O
40
Trademarks
The following terms are trademarks or registered trademarks of Lenovo in the
United States, other countries, or both.
Lenovo
OneKey
Microsoft and Windows are trademarks of Microsoft Corporation in the United
States, other countries, or both.
Other company, products, or service names may be trademarks or service marks
of others.
Prvo izdanje (prosinac 2011.)
Copyright Lenovo 2011.
Prije koritenja ovim proizvodom pobrinite se da prvo proitate Lenovo
Prirunik o sigurnosti i opim informacijama.
Neke upute u ovom priruniku moda podrazumijevaju da koristite
Windows

7. Ako koristite drugi operativni sustav Windows, neke se radnje

mogu malo razlikovati. Ako koristite drugi operativni sustav, mogue je da se
neke radnje nee primjenjivati na vas.
Napomene

Znaajke opisane u ovom priruniku zajednike su veini modela. Neke

znaajke moda nisu dostupne na vaem raunalu i/ili vae raunalo moda
ukljuuje znaajke koje nisu opisane u ovom korisnikom priruniku.

Slike u ovom priruniku mogu se razlikovati od proizvoda kojim se sluite.

Slike kojima se koristimo u ovom priruniku slike su za Lenovo IdeaPad
Z480, osim ako nije drugaije navedeno.

Da biste potraili informacije, idite na http://consumersupport.lenovo.com/ i

kliknite User guides and manuals.
Regulatorna napomena

Lenovo G700/G710
Read the safety notices and important tips in the
included manuals before using your computer.

L
e
n
o
v
o

C
h
i
n
a

2
0
1
3
User Guide
en-US
Rev. AA00