Scribd
Upload
956 views2 pages

L&T Gemini Catalog

This document describes the GEMiNi, a dual source energy meter that can measure energy from two separate sources. It has class 1.0 accuracy and dual energy registers to track consumption from a electricity board supply and a generator supply separately. The meter has an RS485 communication port and can be programmed for CT/PT values and meter ID. It provides measurements of voltage, current, power, frequency and more. The meter is designed to replace having two separate meters and has dimensions of 96x96x105mm.

Uploaded by

katiki216
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
956 views2 pages

L&T Gemini Catalog

This document describes the GEMiNi, a dual source energy meter that can measure energy from two separate sources. It has class 1.0 accuracy and dual energy registers to track consumption from a electricity board supply and a generator supply separately. The meter has an RS485 communication port and can be programmed for CT/PT values and meter ID. It provides measurements of voltage, current, power, frequency and more. The meter is designed to replace having two separate meters and has dimensions of 96x96x105mm.

Uploaded by

katiki216
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GEMiNi

15

Dual Source Meter GEMiNi


An innovative panel meter designed for dual source energy
measurement. It serves as a replacement for two separate
energy meters necessary for metering same application with
dual energy sources.
Class 1.0 accuracy as per IS & IEC standards
Dual energy register for dual energy source
l
RS485 MODBUS communication
l programmable CT, PT Values & Meter ID
Field
l

Technical Specifications:
Model

GEMiNi

Enclosure

Engineering plastic complying to IP51

Dimension

96 x 96 mm x 105 mm (HxWxD)
Panel cutout: 92 x 92 mm

Connection

3P4W

Display

Backlit LCD

Type

kWh Meter

Measurements

kWh / kW / Frequency / Voltage / Current

Starting Current

0.2% of rated current (5 A)

Class of Accuracy

Class 1.0

Current

5 A (rated), 10 A (max)

Voltage (P-N)

3 x 240 V (-30 % to +20 % of V Ref)

Frequency

50 Hz 5%

Auxiliary Supply

88 V to 300 V AC/DC

DG Sensing Input

18 V-60 V DC/80 V-300 V AC

Weight

470 gm 5%

Weight with Packaging

630 gm 5%

Dual Energy Registers:


Two separate energy registers are provided, one for EB (Electricity Board supply) and another for G (Generator
Supply). Normally meter accumulates energy in EB register. Whenever the DG sensing signal (18 to 60 V DC /80
to 300 V AC) is present, meter accumulates energy in G register. Separate LED indication is provided on the
meter front Panel, which glows when DG sensing signal is present.

Display Parameters:
Cumulative EB energy kWh
Cumulative gen. energy kWh
Average voltage
l
l
Average current
l active power
Total

Frequency
R Phase voltage
l
Y Phase voltage
l
B Phase voltage
l
R Phase current

Y Phase current
B Phase current
R Phase active power
l
Y Phase active power
l
B Phase active power
l
Phase sequence
l

GEMiNi

16

Overall Dimensions (mm)


112.5
97.5

90.0

69.0

5.6

Panel Cutout 92 x 92 mm

Connection Details
R

1
S1

10

2
S2
S1

11

S2

12

D+

In
RS485

D-

1A
5A

DG SENING
AC/DC

S2

AUX. SUPPLY
AC/DC

DG
S1

13

14

15

16

Aux. Supply : 88 V to 300 V AC/DC


DG Sensing Input : 18 V-60 V DC / 80 V-300 V AC

Meter connection should be done exactly as shown in above diagram


Make the CT connections on terminals 1-2 (R-Ph), 3-4 (Y-Ph) and 5-6 (B-Ph)
Make the PT connections on the terminals 9 (R), 10 (Y), 11 (B) and 12 (N)
l
Connect the Auxiliary Supply (88 V to 300 V AC/DC) to the terminals 13 (-ve) and 14 (+ve) to power
l
On the meter. It can be done by shorting one phase with auxiliary as shown in the above picture
Connect the DG sensing input (18 V-60 V DC/80 V-300 V AC) on terminal 15 (-ve) & 16 (+ve)
l

Ordering Information
Cat. No.
WM30DFC3CRS

Description
3 Ph 4 W 240 V 5 A with RS485 (Dual source kWh meter) - GEMiNi

You might also like