Rev.

A-2010
www.intempco.com
Manufacturer of Superior Quality Instrumentation
Temperature
Head Mounted RTDs

Spring Loaded Assemblies

Surface Mounted RTDs

Custom and OEM Designs Available

Best Value and Easy Installation

INDUSTRIAL
RTDs SERIES
General Purpose with Welded Transition
Fitting and Extension Cable
General purpose RTD for industrial applications
PVC or Teflon leads available
Fitting welded to probe
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Custom designs available
www.intempco.com R2.0
Industrial RTD Series
Overview
Rev. B-01052011
RTD R16
Capsule RTD with Transition, Extension Cable
and Adjustable Compresssion Fitting Fitting
General purpose RTD for industrial applications
PVC or Teflon leads available
Adjustable fittings available
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Custom designs available
Capsule RTD with Transition, Extension Cable
and Welded Process Fitting
General purpose RTD for industrial applications
PVC or Teflon leads available
Fitting welded to probe
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Custom designs available
General Purpose with Welded Transition
Fitting and Extension Cable
General purpose RTD for industrial applications
PVC or Teflon leads available
Fitting welded to probe
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Custom designs available
General Purpose with Welded Transition
Fitting and Extension Cable
General purpose RTD for industrial applications
PVC or Teflon leads available
Fitting welded to probe
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Custom designs available
RTD R17 RTD R15
RTD R11 RTD R06 RTD R03
Capsule RTD with no Transition, Extension
Cable and Adjustable Compresssion Fitting
Low cost, ideal for HVAC applications
PVC or Teflon leads available
Adjustable fittings available
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Custom designs available
Capsule RTD w/ M12 Connector and Welded
Process Threaded Hex Fitting
M12 connector ideal for quick disconnect
applications and heremetically sealed
M12 extension cable available
Fitting welded to probe
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Capsule RTD w/ M12 Connector and
Adjustable Compression Fitting
M12 connector ideal for quick disconnect
applications and heremetically sealed
M12 extension cable available
Adjustable fittings available
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Industrial RTD Series
Overview
www.intempco.com R3.0 Rev. B-01052011
Spring Loaded RTD Probe w/ Hex Fitting
Spring loaded, for use with thermowells
Hex fitting accepts enclosures
Probe O-ring sealed or non-sealed
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Custom designs available
RTD R18
RTD R24 RTD R25
Capsule Probe w/ RTD Connector
Ideal for quick disconnect applications
Assembled with standard RTD connectors
Adjustable or fittings welded to probe avilable
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Custom designs available
Capsule Probe w/ RTD Connector &
Extension Cable
Ideal for quick disconnect applications
Standard RTD connectors available
Adjustable or fittings welded to probe avilable
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Custom designs available
Heat Tracing Tempearture Sensor w/ Radius
Mounting Pad
Head assembly designed for clamp-on
applications for heat tracking of pipes
Mounting pad welded to probe
Mounting clamps and accessories available
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
RTD RHT52
RTD R22 RTD R19
www.intempco.com R4.0
Industrial RTD Series
Overview
Rev. B-01052011
RTD R46
Surface Mount Flexible RTD
Strap-on flexible RTD for mounting on pipes
Rigid version available for mounting on plates
Excellent thermal conductivity and rapid
response time
Silicone body is moisture resistant
Teflon insulation cable standard
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Temperatures to 200C (400F)
Surface Mount Pad Type RTD
Strap-on RTD for mounting on pipes
Pad w/hole available for mounting on plates
Excellent thermal conductivity and rapid
response time
Metal body is moisture resistant
Teflon insulation cable standard
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Temperatures to 200C (400F)
Surface Mount Ridid RTD
Strap-on or bolt to surface RTD
Plate w/holes available for mounting on plates
Excellent thermal conductivity and rapid
response time
Metal body is moisture resistant
Teflon insulation cable standard
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Temperatures to 200C (400F)
All Teon RTD w/ Extension Cable or M12
Connector and Adjustable Compression Fitting
Designed for very harsh, chemical applications
M12 connector ideal for quick disconnect
applications and heremetically sealed
Teflon jacketed extension cable recommended
Teflon adjustable fittings available
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Head Type RTD Assembly
Standard head type RTD assembly
Many head types available
Transmitter available, fits standard heads
Probe welded to fitting or spring loaded
Process fitting 1/2 NPT std., others available
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
RTD R50 RTD R35
RTD R340 RTD R30 RTD RHT53
Heat Tracing Tempearture Sensor w/ Hex
Mounting Pad
Head assembly designed for clamp-on
applications for heat tracking of pipes
Mounting hex-pad welded to probe
Mounting clamps and accessories available
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Industrial RTD Series
Overview
www.intempco.com R5.0 Rev. B-01052011
Eurostyle Spring Loaded Head Type RTD
Assembly w/Thermowell
Probe can be replaced without possibilty for
leakage
Probe spring leaded in tube-type thermowell
Many head types available
Transmitter available, fits standard heads
Process fitting 1/2 NPT std., others available
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
RTD R51
Adjustable Immersion Head Type RTD
Assembly
Standard head type RTD assembly
Many head types available
Transmitter available, fits standard heads
Probe immersion adjusted by fitting
Process fitting 1/2 NPT std., others available
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Spring Loaded Head Type RTD Assembly
Probe can be replaced without possibilty for
leakage
Probe spring leaded in thermowell
Many types of thermowells available
Many head types available
Transmitter available, fits standard heads
Instrument fitting 1/2 NPT std, others available
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
RTD R55 RTD R52
RTD w/ HirschMann Plug
Ideal for quick disconnect applications
Assembled with Hirschmann plug
Adjustable or fittings welded to probe avilable
Many fitting sizes and probe diameters avilable
RTD Pt100 ohm standard, others available
2, 3, or 4 wire circuit types
Isolation to 1000 VDC
Factory calibration certificate optional
Custom designs available
RTD RMR25
www.intempco.com R6.0
RTD R03
Capsule RTD with no Transition
Extension Cable and Adjustable Compresssion Fitting
Rev. B-01052011
Inventory Number Description
R03B-L-2-TF-036-L* Probe 1/8 diameter, specify sheath length
R03B-L-3-TF-036-L* Probe 3/16 diameter, specify sheath length
R03B-L-4-TF-036-L* Probe 1/4 diameter, specify sheath length
*Sheath length L :
Select -> 040 for 4 inch 120 for 12 inch
060 for 6 inch 180 for 18 inch
090 for 9 inch 240 for 24 inch
Features
General purpose RTD probe with PVC or Teon lead wires
No transition junction between leads and sheath
Adjustable tting available
Description
This general purpose RTD probe is compact, low cost and ideal for OEM applications.
Lead wires transition the sheath without the use of metal transition tting and are at that
point not as durable as on the model R06 probe. PVC or Teon jacketed lead wires
are available.
Specications (for all models)
Temperature range : Code L
-50 to 200C ( -58 to 392F) Teon wires
-20 to 90C ( -4 to 195F) PVC wires
Sheath Material : 316 stainless steel.
Finish ( standard) : 32 micro-inches max.
Pressure rating : 500 psi ( 34.5 bar).
RTD Element : Pt 100 Ohm @ 0
o
C, =0.00385 IEC 751
& DIN43760 standard
Lead wires : Stranded 22 AWG std., PVC or Teon insulation
Self-heating : 50 mW/C typical in moving water.
Insulation resistance : Single element probes: 100 mega-ohms min. at
500 VDC, leads to case
Dual element probes : 100 mega-ohms min. at
100 VDC, between element and leads to case
Stocked items
Intempco stocks the most commonly used R03 style capsule probes with the following features :
Teon insulated leads, stranded 22 AWG silver plated copper, terminating in stripped ends, 3 feet long
3-wire conguration, Code S3
Element Pt 100 Ohm @ 0 C, =0.00385, Class B
Temperature range of 50/ 200 Deg. C
1/8, 3/16 and 1/4 diameter SS316 sheath
Probe lengths available are 4, 6, 9, 12, 18, and 24
Ordering Information ( Order using Intempco inventory number )
RTD R03
Capsule RTD with no Transition
Extension Cable and Adjustable Compresssion Fitting
www.intempco.com R7.0 Rev. B-01052011
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
D4 Dual, 4 wire
Other elements available. Consult factory.
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
BOX6
CODE
Probe Material
S Stainless steel 316/ 316L
_ -
3 1
_ -
4
-
5
_ -
6 8
-
7
-
MODEL
R03_ - _ _
2
- _ _
11
_ _ _ _ - _ _ _ _
10
- _ _ _
9
_ _ _ -
BOX5
CODE
Probe Diameter
2 1/ 8 Diameter
3 3/ 16 Diameter
4 1/ 4 Diameter
5 5/ 16 Diameter
6 3/ 8 Diameter
BOX8
CODE
Extension Cable Type
PV
PVC insulation, 105C
( 221F) max. ( ambient & process)
TF
Teon

insulation, 200C
( 392F) max. ( ambient & process)
BOX1
CODE
Temperature Range
A
Low temperature
-20 to 90C ( -4/ 195F)
L
Low temperature
-50 to 200C ( -58/ 392F)
L
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
Compression
tting
F
Process
NPT
D
MODEL R03A
MODEL R03B
F
End Cap
105
o
C Temp. Limit
MODEL R03C
F
Flared End
BOX10
CODE
Probe Length L
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
BOX11
CODE
Options
N None
C1 CoC @ 0C R vsT table
C2 CoC @ 0C & 100C R vsT table
Custom Builder
BOX7
CODE
Fitting Type
0 None
A**S Adjustable compression tting*
Ferrule material :
A = Stainless steel* B = Brass* T = Teon

* Not readjustable with metal ferrule

Fitting material :
S = Stainless steel B = Brass
Ex.: T14B = Teon

ferrule, 1/4 NPT, Brass tting

Process NPT size :
** 18=1/8 NPT 14=1/4 NPT
38=3/8 NPT 12=1/2 NPT
34=3/4 NPT
BOX12
CODE
Extension Cable
Length F
_ _ _
In inches
Ex.: 060=60 long
Note : Extension wires 12 long and less are
single stranded leads, 22 AWG
www.intempco.com R8.0
RTD R06
Capsule RTD with Transition
Extension Cable and Adjustable Compresssion Fitting
Rev. B-01052011
L F 3.0
D
Reduced Tip
Shown with
SAE/MS 3/8-24 (ES)
Shown with
Nylon Strain Relief (SR)
105
o
C Temp. Limit
Shown with
End Cap, Polyolen (EC)
105
o
C Temp. Limit
Shown with
Spring Strain Relief (SA)
Compression
Fitting
Shown with
Adaptor Transition (AT)
1.25
. Inventory Number Description
R06A-L-S3-B-TF-036-L* Probe 1/8 diameter, specify sheath length
R06A-L-S3-C-TF-036-L* Probe 3/16 diameter, specify sheath length
R06A-L-S3-D-TF-036-L* Probe 1/4 diameter, specify sheath length
*Sheath length L :
Select -> 040 for 4 inch 120 for 12 inch
060 for 6 inch 180 for 18 inch
090 for 9 inch 240 for 24 inch
Features
General purpose RTD probe with PVC or Teon lead wires
Transition adaptor between leads and sheath
Adjustable tting available
OEM designs and pricing available
Description
This general purpose RTD probe is compact, low cost and ideal for OEM applications. Lead wires transition the sheath with the use of metal
transition adaptor and are at that point more durable than the model R03 probe. PVC or Teon jacketed lead wires are available.
Stocked items
Intempco stocks the most commonly used R06 style capsule probes with the following features :
Teon insulated leads, stranded 22 AWG silver plated copper, terminating in stripped ends, 3 feet long
3-wire conguration, Code S3
Element Pt 100 Ohm @ 0 C, =0.00385, Class A
Temperature range of 50/ 200 Deg. C
1/8, 3/16 and 1/4 diameter SS316 sheath w/end cap
Probe lengths available are 4, 6, 9, 12, 18, and 24
Ordering Information( Order using Intempco inventory number )
RTD R06
Capsule RTD with Transition
Extension Cable and Adjustable Compresssion Fitting
www.intempco.com R9.0 Rev. B-01052011
BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
D4 Dual, 4 wire
Other elements available. Consult factory.
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
BOX6
CODE
Probe Material
S Stainless steel 316/ 316L
I Inconel

600
BOX7
CODE
Probe Length L
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
Other materials available. Consult factory.
_ -
3 1
_ -
4
-
5
_ -
6 8
-
7
-
MODEL
R06 - _ _ _
2
- _ _
11
_ _ _ - _ _ 0
10
- _ _ _
BOX13
CODE
Options
N None
C1 CoC @ 0C R vsT table
C2 CoC @ 0C & 100C R vsT table
Other diameters available. Consult factory.
12
_ _ _ -
BOX9
CODE
Probe Termination
AT Adaptor transition only
EC Adaptor w/End cap
SA Adaptor w/Spring
SR Adaptor w/Nylon Strain Relief
ES Adaptor w/SAE/MS 3/8-24
NA No Adaptor transition, smooth probe
Other terminations available. Consult factory.
9
_ _ -
Custom Builder
BOX5
CODE
Probe Diameter D
B 1/8
40 0.156 ( 4.0mm)
C 3/16
60 0.236 ( 6.0mm)
D 1/4
F 3/8
H 1/2
Other options available. See Accessories and Option
Codes section, www.intempco.com or consult factory.
-
13
_ _
CODE Sheath O.D. Tip O.D.
DB 1/4 1/8
FC 3/8 3/16
HC 1/2 3/16
HD 1/2 1/4
JD 5/8 1/4
Other ttings available. See www.intempco.com &
consult factory for pricing.
BOX11
CODE
Extension Cable Type
PV
PVC insulation, stranded cond.
90C ( 195F) max.
TF
Teon

insulation, stranded cond.

200 C ( 392F) max.
TS
Teon

with SS overbraid,
200C ( 392F) max.
TA
Teon

with SS armor,
200C ( 392F) max.
TP
Teon

with SS armor and polyolen

shrink, 90C ( 195F) max.
TT
Teon

with SS armor and Teon

shrink, 200 C ( 392F) max.

Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4, D4 circuits most accurate
BOX10
CODE
Fitting Type
0 None
A**S Adjustable compression tting*
Ferrule material :
A = Stainless steel* B = Brass* T = Teon

* Not readjustable with metal ferrule

Fitting material :
S = Stainless steel B = Brass
Ex.: T14B = Teon

ferrule, 1/4 NPT, Brass tting

Process NPT size :
** 18=1/8 NPT 14=1/4 NPT
38=3/8 NPT 12=1/2 NPT
34=3/4 NPT 44=1 NPT
BOX12
CODE
Extension Cable
Length F
_ _ _
In inches
Ex.: 060=60 long
Note : Extension wires 12 long and less are
single stranded leads, 22 AWG
www.intempco.com R10.0
RTD R11
Direct Immersion RTD with Transition
Extension Cable and Welded Process Fitting
Rev. B-01052011
F 3.0
D
Reduced Tip
Shown with
SAE/MS 3/8-24
Shown with
Nylon Strain Relief
105C Temp. Limit
Shown with
End Cap, Polyolen
105C Temp. Limit
Shown with
Spring Strain Relief (SA)
Fixed Fitting
Shown with
Adaptor Transition
1.25
. Inventory Number Description
R11A-L-S3-B-TF-036-L* Probe 1/8 diameter, specify sheath length
R11A-L-S3-C-TF-036-L* Probe 3/16 diameter, specify sheath length
R11A-L-S3-D-TF-036-L* Probe 1/4 diameter, specify sheath length
*Sheath length L :
Select -> 040 for 4 inch 120 for 12 inch
060 for 6 inch 180 for 18 inch
090 for 9 inch 240 for 24 inch
Features
General purpose RTD probe with PVC or Teon lead wires
Transition adaptor between leads and sheath
Welded tting available
OEM designs and pricing available
Description
This general purpose RTD probe is compact, low cost and ideal for OEM applications. Lead wires transition the sheath with the use of metal
transition adaptor and are at that point more durable than the model R03 probe. PVC or Teon jacketed lead wires are available.
Stocked items
Intempco stocks the most commonly used R11 style capsule probes with the following features :
Teon insulated leads, stranded 22 AWG silver plated copper, terminating in stripped ends, 3 feet long
3-wire conguration, Code S3
Element Pt 100 Ohm @ 0 C, =0.00385, Class A
Temperature range of 50/ 200 Deg. C
1/8, 3/16 and 1/4 diameter SS316 sheath w/end cap
Probe lengths available are 4, 6, 9, 12, 18, and 24
Ordering Information ( Order using Intempco inventory number )
C
U
RTD R11
Direct Immersion RTD with Transition
Extension Cable and Welded Process Fitting
www.intempco.com R11.0 Rev. B-01052011
BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
D4 Dual, 4 wire
Other elements available. Consult factory.
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
BOX7
CODE
Immersion Length U
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
Other materials available. Consult factory.
_ -
3 1
_ -
4
-
5
_ -
6 8
-
7
-
MODEL
R11 - _ _ _
2
- _ _
11
_ _ _ - _ _ _ _ _
10
- _ _ _
BOX13
CODE
Options
N None
C1 CoC @ 0C RvsT table
C2 CoC @ 0C & 100C RvsT table
Other diameters available. Consult factory.
12
_ _ _ -
BOX9
CODE
Probe Termination
AT Adaptor transition only
EC Adaptor w/End cap
SA Adaptor w/Spring
SR Adaptor w/Nylon Strain Relief
ES Adaptor w/SAE/MS 3/8-24
NA No Adaptor transition, smooth probe
Other terminations available. Consult factory.
9
_ _ -
Custom Builder
BOX10
CODE
Fitting Type
F**S* Fixed (welded) process tting
Fitting material :
* S = Stainless steel 316/316L
I = Inconel

600
H = HasteIoy
M = Monel

Process NPT male size :

** 18=1/8 NPT 14=1/4 NPT
38=3/8 NPT 12=1/2 NPT
34=3/4 NPT 44=1 NPT
BOX5
CODE
Probe Diameter D
B 1/8
40 0.156 ( 4.0mm)
C 3/16
60 0.236 ( 6.0mm)
D 1/4
F 3/8
H 1/2
Other options available. See Accessories and Option
Codes section, www.intempco.com or consult factory.
-
13
_ _
CODE Sheath O.D. Tip O.D.
DB 1/4 1/8
FC 3/8 3/16
HC 1/2 3/16
HD 1/2 1/4
JD 5/8 1/4
Other ttings available. See www.intempco.com &
consult factory for pricing.
BOX8
CODE
Extension
Length C
N _ _
In 0.1 increments ( 1.0 Std. )
Ex.: N10=1.0 long
BOX6
CODE
Probe Material
S Stainless steel 316/ 316L
I Inconel 600
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4, D4 circuits most accurate
BOX11
CODE
Extension Cable Type
PV
PVC insulation, stranded cond.
90C ( 195F) max.
TF
Teon

insulation, stranded cond.

200 C ( 392F) max.
TS
Teon

with SS overbraid,
200C ( 392F) max.
TA
Teon

with SS armor,
200C ( 392F) max.
TP
Teon

with SS armor and polyolen

shrink, 90C ( 195F) max.
TT
Teon

with SS armor and Teon

shrink, 200 C ( 392F) max.

BOX12
CODE
Extension Cable
Length F
_ _ _
In inches
Ex.: 060=60 long
Note : Extension wires 12 long and less are
single stranded leads, 22 AWG
www.intempco.com R12.0
RTD R15 Series
Direct Immersion RTD with Welded Transition Fitting
and Extension Cable
Rev. B-01052011
BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
D4 Dual, 4 wire
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
BOX11
CODE
Probe Length L
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
_ -
1 3
-
4
_ __ -
5 8 7
-
MODEL
R _ _ _ - _ _ _
2
- _ _ _ _ _ - _ _
11
- _ _ _
Other diameters available. Consult factory.
10
_ _ -
Custom Builder
BOX5
CODE
Probe Diameter D
125 1/8
187 3/16
250 1/4
312 5/16
375 3/8
500 1/2
R15
Compression
Fitting
BOX6
CODE
Probe Material
S Stainless steel 316/ 316L
I Inconel 600
BOX7
CODE
Fitting Type
F18S 1/ 8 NPT
F14S 1/ 4 NPT
F38S 3/ 8 NPT
F12S 1/ 2 NPT
F34S 3/ 4 NPT
F44S 1 NPT
BOX10
CODE
Terminal Type
00 Bare leads, stripped
CL
Bare leads,
Closed Lugs for #6 screws
Note : For R16 order adjustable tting separately
if needed
L
L
L
F
F
D
R16
R17
9
- _ _ _
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4, D4 circuits most accurate
Other materials available. Consult factory.
BOX8
CODE
Lead Wire Insulation F
Each
Cond.
Overall
Jacket
Temp.
Range
TF Teon Teon
200
o
C
( 392
o
F )
TN Teon None
260
o
C
( 500
o
F )
TM Teon
Alum. Mylar
Drain Wire
Teon
200
o
C
( 392
o
F )
G Glass Glass
482
o
C
( 900
o
F )
Note : 1. For SS armor over extension cable,
add A to code E.g.: TFA
3. For SS overbraid over extension cable,
add S to code E.g.: TFS
BOX9
CODE
Extension Cable
Length F
_ _ _
In inches
Ex.: 060=60 long
Note : Extension wires 12 long and less are
single stranded leads, 22 AWG
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
Other elements available. Consult factory.
6
- _
RTD Industrial Series
www.intempco.com R13.0 Rev. B-01052011
Notes :
www.intempco.com R14.0
RTD R18
Spring Loaded RTD Probe
w/ Hex Nipple
Rev. B-01052011
. Inventory Number Description
R18A-L-4-TN-006-A* Probe 1/4 diameter, specify probe length A
*Probe length A :
Select -> 2.5 for 2.5 inch 9 for 9 inch
4 for 4 inch 10.5 for 10.5 inch
6 for 6 inch 12 for 12. inch
7.5 for 7.5 inch 13.5 for 13.5. inch
Features
Spring loaded RTD probe ready to assemble in thermowells
SS316 or Inconel 600 sheath
1/2 x 1/2 NPT Hex tting, available O-Ring sealing
All parts stainless steel
RTD replacable from top of tting
Description
This spring loaded RTD probe is compact, low cost and ideal for both OEM and
custom applications. Many wire choices are available for custom congurations. A
adjustable stainless steel integral spring insures positive spring loading for
thermowell mounting. RTD can be replaced without removal of tting or assembly.
Specications (for all models)
Temperature range : Probes available -50 to 200C ( -58 to 392F)
Sheath Material : 316 stainless steel or Inconel 600
Finish ( standard) : 32 micro-inches max.
Pressure rating : 500 psi ( 34.5 bar). ( tube only)
RTD Element : Pt 100 Ohm @ 0
o
C, =0.00385 IEC 751
& DIN43760 standard
Lead wires : Stranded 22 AWG std.
Self-heating : 50 mW/C typical in moving water.
Insulation resistance : Single element probes: 100 mega-ohms min.
@ 500 VDC, leads to case
Dual element probes : 100 mega-ohms min. at
100 VDC, between element and leads to case
O-Ring seal : Viton O-Ring seal max. temperature 200C
Transistion : Sheath to wire transistion max. temperature 130C
Stocked items
Intempco stocks the most commonly used R18 style RTD probes with the following features :
Teon insulated leads, stranded 22 AWG silver plated copper, terminating in stripped ends, 6 long
3-wire conguration, Code S3
Element Pt 100 Ohm @ 0 C, =0.00385, Class B
Temperature range of 50/ 200 Deg. C
1/4 diameter SS316 sheath
Probe lengths available are 2.5 , 4, 6, 7.5, 9, 10.5, 12, 13.5
Hex tting 1/2 x 1/2 NPT ( style R18A)
Ordering Information ( Order using Intempco inventory number )
RTD R18
Spring Loaded RTD Probe
w/ Hex Nipple
www.intempco.com R15.0
BOX11
CODE
Probe Length A
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
_ -
3 1
_ -
4
-
5
_ -
6 8 7
-
MODEL
R18 _ - _ _ _ _
2
- _ _ _ _ _ - _ _
11
- _ _ _
10
_ _ -
Custom Builder
BOX10
CODE
Terminal Type
00 Bare leads, stripped
CL
Bare leads,
Closed Lugs for #6 screws
BOX6
CODE
Probe Material
S 316 Stainless Steel
I 600 Inconel
BOX5
CODE
Probe Diameter D
3 3/ 16 Diameter
4 1/ 4 Diameter
M06 6mm Diameter
BOX7
CODE
Fitting Type & Material
12S 1/2 NPT, 303 Stainless Steel
9
_ _ _ -
A
D
2
F
1/2 NPT
0.35 Ref.
O-Ring sealed
Model shown
Transistion
temperature
should not
exceed 130
o
C
Spring
Compressed
O-Ring seal
2
5/16
MODEL R18C
MODEL R18D MODEL R18B
MODEL R18A
O-Ring sealed
Model shown
BOX12
CODE
Options
N None
C1 CoC @ 0C RvsT table
C2 CoC @ 0C & 100C RvsT table
Other options available. See Accessories and Option
Codes section, www.intempco.com or consult factory.
12
- _ _ _
BOX8
CODE
Lead Wire Insulation F
Each
Cond.
Overall
Jacket
Temp.
Range
TF Teon Teon
200
o
C
( 392
o
F )
TN Teon None
260
o
C
( 500
o
F )
TM Teon
Alum. Mylar
Drain Wire
Teon
200
o
C
( 392
o
F )
GL Glass Glass
482
o
C
( 900
o
F )
Note : 1. For SS armor over extension cable,
add A to code E.g.: TFA
3. For SS overbraid over extension cable,
add S to code E.g.: TFS
BOX9
CODE
Extension Cable
Length F
_ _ _
In Inches
Ex.: 060 =60 long
Note : Extension wires 12 long and less are
single stranded leads, 22 AWG
BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
D4 Dual, 4 wire
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4, D4 circuits most accurate
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
Other elements available. Consult factory.
www.intempco.com R16.0
RTD R19
Direct Immersion RTD
w/ Connector
Rev. B-01052011
MODEL
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX3
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
BOX7
CODE
Immersion Length U
_ _ _
In 0.1 increments
Ex.: 010=1.0 long
2
_ -
3
-
4
_ -
5 7 6
-
MODEL
R_19 - _ _ _ _
1
- _ _ _ _ _ _ - _ _ _
9
- _ _ _
8
_ _ -
Custom Builder
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
Other diameters available. Consult factory.
BOX4
CODE
Probe Diameter D
062 1/16
125 1/8
187 3/16
250 1/4
312 5/16
375 3/8
500 1/2
BOX5
CODE
Probe Material
S Stainless steel 316/ 316L
I Inconel 600
BOX6
CODE
Fitting Type
0 None
A**S Adjustable tting *
Ferrule material :
A = Stainless steel* B = Brass* T = Teon

* Not readjustable with metal ferrule

Fitting material :
S = Stainless steel (SS316) B = Brass
Ex.: T14B = Teon

ferrule, 1/4 NPT Brass tting

A12S = Stainless ferrule, 1/2 NPT Stainless
tting
F**S Fixed tting ( SS316)
Process NPT size :
** 18=1/8 NPT 14=1/4 NPT
38=3/8 NPT 12=1/2 NPT
34=3/4 NPT
D
U
L
Fixed Fitting
For adjustable tting enter U = 1.0 (Code 010)
Other materials available. Consult factory.
BOX1
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
Other elements available. Consult factory.
BOX9
CODE
Probe Length L
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
BOX8
CODE
Terminal Type
1P Miniature 2-pole plug
2P Standard 2-pole plug
3P Standard 3-pole plug
4P
Standard 2-pole plug
with external strain
relief
D4P
Dual-STD 2-pole plug
with external strain
relief
Note : 1. For use to 205oC ( 400
o
C)
2. For high temp. ( to 425
o
C) add H to
code , E.g.: 1PH
3. For female jack instead of plug, change
P to J
4. For mating female jack add J to code
RTD R22
Direct Immersion RTD
w/ Connector & Extension Cable
www.intempco.com R17.0 Rev. B-01052011
MODEL
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX3
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
BOX7
CODE
Immersion Length U
_ _ _
In 0.1 increments
Ex.: 010=1.0 long
_ -
3 1
_ -
4
-
5
_ _ _ _ -
6 7
-
MODEL
R_22 - _ _
2
- _ _ _ _ _
10
- _ _ _
9
_ _ _ -
Custom Builder
8
_ _ -
BOX4
CODE
Probe Diameter D
062 1/16
125 1/8
187 3/16
250 1/4
312 5/16
375 3/8
500 1/2
BOX5
CODE
Probe Material
S Stainless steel 316/ 316L
I Inconel 600
BOX6
CODE
Fitting Type
0 None
A**S Adjustable tting *
Ferrule material :
A = Stainless steel* B = Brass* T = Teon

* Not readjustable with metal ferrule

Fitting material :
S = Stainless steel B = Brass
Ex.: T14B = Teon

ferrule, 1/4 NPT, Brass tting

F**S Fixed tting ( SS316)
Process NPT size :
** 18=1/8 NPT 14=1/4 NPT
38=3/8 NPT 12=1/2 NPT
34=3/4 NPT
BOX11
CODE
Probe Length L
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
BOX10
CODE
Terminal Type
0 6 bare leads
1P Miniature 2-pole plug
2P Standard 2-pole plug
3P Standard 3-pole plug
4P
Standard 2-pole plug
with external strain
relief
D4P
Dual-STD 2-pole plug
with external strain
relief
Note : 1. For use to 205
o
C ( 400
o
F)
2. For high temp. ( to 425
o
C) add H to
code , E.g.: 1PH
3. For female jack instead of plug, change
P to J
4. For mating female jack add J to code
BOX8
CODE
Lead Wire Insulation F
Each
Cond.
Overall
Jacket
Temp.
Range
T
Teon
( FEP)
Teon
( FEP)
200
o
C
( 392
o
F )
T1
Teon
( TFE)
None
260
o
C
( 500
o
F )
F
Teon
( TFE)
Teon
( TFE)
260
o
C
( 500
o
F )
M
Teon
( FEP)
Alum. Mylar
Drain Wire
Teon
200
o
C
( 392
o
F )
K Kapton Kapton
260
o
C
( 500
o
F )
G Glass Glass
482
o
C
( 900
o
F )
Note : 1. For SS armor over extension cable,
add A to code E.g.: TA
3. For SS overbraid over extension cable,
add S to code E.g.: TS
D
U
L
Compression
Fitting
F
11
- _ _ _
For adjustable tting enter U = 1.0 (Code 010)
BOX 9
CODE
Extension Cable Length F
_ _ _
In inches
Ex.: 060=60 long
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4, D4 circuits most accurate
www.intempco.com R18.0 Rev. B-01052011
U 1.5 H
Fixed Fitting
M12 Micro-Female Connector
Extension Cable Molded PVC
IP68/NEMA 6P, -40C to 90C
D
BOX9
CODE
Fitting Type
F**S* Fixed (welded) process tting
Fitting material :
* S = Stainless steel 316/316L
I = Inconel

600
H = HasteIoy
M = Monel

Process NPT male size :

** 18=1/8 NPT 14=1/4 NPT
38=3/8 NPT 12=1/2 NPT
34=3/4 NPT 44=1 NPT
Other ttings available. See www.intempco.com &
consult factory for pricing.
0.5
RTD R24
Direct Immersion RTD w/ Micro Connector
& Welded Process Threaded Hex Fitting
C
1.0 std.
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
Other diameters available. Consult factory.
BOX6
CODE
Probe Material
S 316 Stainless Steel
BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
D4 Dual, 4 wire
Other elements available. Consult factory.
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
Custom Builder
BOX5
CODE
Probe Diameter D
B 1/8
C 3/16
D 1/4
E 5/16
F 3/8
_ -
3 1
_ -
4
-
5
_ -
6
-
9 MODEL
R24 - _ _
2
- _ _
10
_ _ _ _ - _ _
11
_ _ _ -
8
_ _ _ -
7
_ _ _ -
BOX7
CODE
Immersion Length U
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
BOX10
CODE
Extension Wire Type
MC M12 Micro-Male Connector
BOX11
CODE
Extension
Cable Length H
N None
A2 Straight, 2 meters
A5 Straight, 5 meters
B2 Right angle, 2 meters
B5 Right angle, 5 meters
BOX8
CODE
Extension
Length C
N _ _
In 0.1 increments ( 1.0 Std. )
Ex.: N10=1.0 long
www.intempco.com R19.0 Rev. B-01052011
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
Other diameters available. Consult factory.
BOX6
CODE
Probe Material
S 316 Stainless Steel
BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
D4 Dual, 4 wire
Other elements available. Consult factory.
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
Custom Builder
BOX5
CODE
Probe Diameter D
B 1/8
C 3/16
D 1/4
E 5/16
F 3/8
L 1.5 H
Compression
Fitting
M12 Micro-Female Connector
Extension Cable Molded PVC
IP68/NEMA 6P, -40C to 90C
D
_ -
3 1
_ -
4
-
5
_ -
6
-
9 MODEL
R25 - _ _
2
- _ _
10
_ _ _ _ - _ _
11
_ _ _ -
8
0 -
7
_ _ _ -
0.5
BOX7
CODE
Probe Length L
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
BOX10
CODE
Extension Wire Type
MC M12 Micro-Male Connector
BOX11
CODE
Extension
Cable Length H
N None
A2 Straight, 2 meters
A5 Straight, 5 meters
B2 Right angle, 2 meters
B5 Right angle, 5 meters
RTD R25
Capsule RTD w/ Micro Connector
& Adjustable Compression Fitting
Other ttings available. See www.intempco.com &
consult factory for pricing.
BOX9
CODE
Fitting Type
0 None
A**S Adjustable compression tting*
Ferrule material :
A = Stainless steel* B = Brass* T = Teon

* Not readjustable with metal ferrule

Fitting material :
S = Stainless steel B = Brass
Ex.: T14B = Teon

ferrule, 1/4 NPT, Brass tting

Process NPT size :
** 18=1/8 NPT 14=1/4 NPT
38=3/8 NPT 12=1/2 NPT
34=3/4 NPT 44=1 NPT
www.intempco.com R20.0
RTD RHT52
Heat Tracing Tempearture Sensor
w/ Radius Mounting Pad
Rev. B-01052011
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
Other elements available. Consult factory.
2
_ -
3
-
4
_ _ _ -
5 6 MODEL
RHT52 - _ _ _
1
- _ _ -
8
_ -
Custom Builder
7
_ _ _ _ -
BOX5
CODE
Probe Diameter D
250 1/4
312 5/16
375 3/8 (Std.)
BOX6
CODE
Probe Material
S Stainless steel 316/ 316L
Cold leg
Shown with
CS3 head
2.25
9
_ _ _ -
Hot leg
Probe
D
Radius
Mounting
pad
BOX8
CODE
Radius Mounting Pads
NPT Pipe Size
A 1
B 1.5
C 2
D 2.5
E 3
F 3.5
G 4
H 5
I 6
J 8
K 10
L* 12 ( see note)
BOX7
CODE
Sheath Length
Hot Leg Cold Leg
4040 4 4
4060 4 6
4080 4 8
* All 12 and larger pipe size are supplied as a at
non-radiused plate.
Consult factory for other hot leg/cold leg combinations
1.0
typical
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
BOX9
CODE
Head/ Termination
0
No head,
supplied with 6 single Teon leads
WA*
Aluminum die cast screw cover,
meets NEMA 4/ IP65 requirements
PO*
White polypropylene screw cover,
meets NEMA 4X/ IP65 requirements
BA2
Bakelite screw cover,
meets NEMA 4X/ IP65 requirements
AM
Mini aluminum die cast screw cover
3/8 NPT conduit, meets NEMA
4X/ IP65 requirements
AH*
Aluminum die cast ip cover, meets
NEMA 4/ IP65 requirements
EX*
Cast aluminum, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
CS*
Cast stainless steel 316 screw cover,
meets NEMA 4X/ IP66 requirements
CX*
Cast stainless steel, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
*2=1/ 2 NPT Conduit *3=3/ 4 NPT Conduit
RTD RHT53
Heat Tracing Tempearture Sensor
w/ Hex Mounting Pad
www.intempco.com R21.0 Rev. B-01052011
BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
Other elements available. Consult factory.
Custom Builder
BOX5
CODE
Probe Diameter D
250 1/4
312 5/16
375 3/8
BOX6
CODE
Probe Material
S Stainless steel 316/ 316L
Cold leg
Shown with
CS3 head
2.25
Hot leg
3.75
std. & min.
Hex
Mounting
pad
BOX8
CODE
Hex Mounting Pads
X Hex 5/8AF, Stainless steel 316
BOX7
CODE
Sheath Length
Hot Leg Cold Leg
4040 4 4
4060 4 6
4080 4 8
2
_ -
3
-
4
_ _ _ -
5 6 MODEL
RHT53 - _ _ _
1
- _ _ -
8
_ -
7
_ _ _ _ -
9
_ _ _ -
Consult factory for other hot leg/cold leg combinations
5/8
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
BOX9
CODE
Head/ Termination
0
No head,
supplied with 6 single Teon leads
WA*
Aluminum die cast screw cover,
meets NEMA 4/ IP65 requirements
PO*
White polypropylene screw cover,
meets NEMA 4X/ IP65 requirements
BA2
Bakelite screw cover,
meets NEMA 4X/ IP65 requirements
AM
Mini aluminum die cast screw cover
3/8 NPT conduit, meets NEMA
4X/ IP65 requirements
AH*
Aluminum die cast ip cover, meets
NEMA 4/ IP65 requirements
EX*
Cast aluminum, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
CS*
Cast stainless steel 316 screw cover,
meets NEMA 4X/ IP66 requirements
CX*
Cast stainless steel, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
*2=1/ 2 NPT Conduit *3=3/ 4 NPT Conduit
www.intempco.com R22.0
RTD R30
Surface Mount RTD - Flexible Silicone Type
Rev. B-01052011
1.00
0.75
0.125
0.63
F
0.75
1.75
0.50
0.25
Standard model
no process connection ( 0)
Flexible mount sheet metal
process connection ( FM)
( slotted for pipe clamp type mounting)
Surface mount solid plate
( 1/ 16 THK aluminum)
process connection ( SM)
2.00
MODEL
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
BOX1
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
BOX3
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
Other elements available. Consult factory.
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
4 0.23% ( 0.6C) @ 0C, Class C
Other tolerances available. Consult factory.
Custom Builder
BOX4
CODE
Process Connection
0 None
FM Flexible Mount
SM Surface Mount
BOX6
CODE
Extension Cable
Length F
_ _ _
In inches
Ex.: 065=65 long
_ -
1 3
-
4 MODEL
R_30 - _ _ _
2
- _ _
6
_ _ _ -
5
_ _ -
Flexible Surface-Mount RTD
Also known as strap-on RTDs, these exible sensors are designed to be mounted directly onto a pipe or other surface where
temperature measurement is desired. Due to their excellent thermal conductivity and large surface area, these sensors offer a
rapid response time. These probes are typically used where direct immersion measurement is difcult. For example, exible RTDs
mounted on the surface of a pipe offers a good approximation of the uid temperature carried inside; motors tted with strap-on
RTDs can be monitored for overheating. Their silicone body is naturally moisture resistant and can withstand
industrial conditions.
Flexible surface-mount units have high accuracy over their useable range of approximately -50C ( -100F) to 200C ( 392F).
BOX5
CODE
Lead Wire Insulation F
Each
Cond.
Overall
Jacket
Temp.
Range
TF Teon Teon
200
o
C
( 392
o
F )
TN Teon None
200
o
C
( 392
o
F )
R23.0 Rev. B-01052011
_ -
3 1
_ -
4
-
5
_ -
6
-
7 MODEL
R340 - _ _ _
2
- _ _
9
_ - _ _
10
- _ _ _ -
8
_ _
Custom Builder
BOX 7
CODE
Ring Size
t W L
A .25 .38 .62
B .25 .62 .88
Note : 1. Other ring sizes available. Consult factory.
2. For certian ring sizes, a transition other
than size shown above may be installed.
BOX 6
CODE
Mounting Pad Material
B Brass ( std. )
A Aluminium
S Stainless steel 316
BOX 1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
BOX 2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX 4
CODE
RTD Circuit Type
S2 Single-2 wire
S3 Single-3 wire
S4 Single-4 wire
D2 Dual-2 wire
D3 Dual-3 wire
D4 Dual-4 wire
Other elements available. Consult factory.
Other tolerances available. Consult factory.
Note : 1. Dual RTDs availabe with Teon

wire only.
2. S3 industry standard circuit.
3. S4 circuit most accurate.
BOX 3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
BOX 8
CODE
Ring Radius r
00 No radius, at ring
_ _
In 0.01 increments
Ex.: 50=0.50 radius
Note : 1. Min. radius available is 0.38.
2. For certian ring sizes, a specied radius
may not be available. Consult factory.
BOX 9
CODE
Extension Cable Type
PV
PVC insulation, stranded cond.
90C ( 195F) max.
TF
Teon

insulation, stranded cond.

200 C ( 392F) max.
TA
Teon

with SS armor,
200C ( 392F) max.
TS
Teon

with SS overbraid,
200C ( 392F) max.
FG
Fiberglass insulation, stranded cond.
400 C ( 752F) max.
FA
Fiberglass insulation with SS armor,
400 C ( 752F) max.
FS
Fiberglass insulation, with SS
overbraid, 400 C ( 752F) max.
Other materials available. Consult factory.
BOX 5
CODE
Ring Hole
Diameter D
00 No hole, blank ring
_ _
In 0.01 increments
Ex.: 25=0.25 dia. hole
L
W
1.25
0.187
transition
F 3.0
t 0.25 std.
r
D dia. hole
x =
L
+
D
2 2
1.25
RTD R340
Surface Mount RTD - Pad Type
BOX10
CODE
Extension Cable
Length F
_ _ _
In Inches
Ex.: 060 =60 long
Note : Extension wires 12 long and less are
single stranded leads, 22 AWG
Rev. B-01052011
1.63
0.80
1.10
1.40
0.50
1.25
0.125 hole ( 2)
SS Plate 0.06 THK
F
0.50
0.25
4.00
0.25 hole ( 2)
SS Plate
0.06 THK
1.00 1.50
1.50
0.75

F

SS adaptor
Epoxy sealed
30
o
bend
1/4. SS316
R35A
R35B
R35C
MODEL
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
BOX3
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
Custom Builder
_ -
1 3
-
4 MODEL
R_35_ - _ _ _
2
- _ _
5
_ _ _ -
INTEMPCO R35 series surface temperature resistance element is designed to be cemented, clamped or bolted to a surface for
temperature measurement. A specially designed moisture seal permits operation in extremely adverse conditions such as may
be encountered on cooling equipment and cold water pipes. Teon insulation and high temperature epoxy permit use at
temperatures as high as 200C ( 392F).
RTD R35 Series
Rigid Surface Mount
BOX4
CODE
Extension Cable Type
PV
PVC insulation, stranded cond.
90C ( 195F) max.
TF
Teon

insulation, stranded cond.

200 C ( 392F) max.
TS
Teon

with SS overbraid,
200C ( 392F) max.
TA
Teon

with SS armor,
200C ( 392F) max.
BOX1
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
Other elements available. Consult factory. BOX5
CODE
Extension Cable
Length F
_ _ _
In Inches
Ex.: 060 =60 long
Note : Extension wires 12 long and less are
single stranded leads, 22 AWG
www.intempco.com R25.0 Rev. B-01052011
RTD R46
All Teon Construction
w/ Extension Cable or Micro-Connector
BOX8
CODE
Fitting Type
0 None
T12T 1/2 NPT, adjustable, Teon
T34T 3/4 NPT, adjustable, Teon
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
BOX6
CODE
Probe Material
T PFA Teon

clad SS316 tube ( std.)

F PTFE Teon

clad SS316 tube

BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
D4 Dual, 4 wire
Other elements available. Consult factory.
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
Custom Builder
BOX5
CODE
Probe Diameter D
D 1/ 4 Diameter
E 5/ 16 Diameter ( Std. construction)
BOX11
CODE
Probe Length L
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
L 2.0 F
Compression
Fitting
D
_ -
3 1
_ -
4
-
5
_ -
6
-
8 MODEL
R46 - _ _ _
2
- _ _
10
_ _ _ _ - _ _
11
_ _ _ -
9
_ _ -
7
0 -
0.5
BOX9
CODE
Extension
Connector / Cable Type
MC M12 Micro-Male Connector
PV
PVC insulation,
90C ( 195F) max.
SL
Silicone insulation,
180C ( 356F) max.
TF
Teon

insulation,
200 C ( 392F) max.
TA
Teon

with SS armor,
200C ( 392F) max.
TP
Teon

with SS armor and polyolen

shrink, 90C ( 195F) max.
TT
Teon

with SS armor and Teon

shrink, 200 C ( 392F) max.

BOX10
CODE
Extension Cable Length H
( MC option)
N None
A2 Straight, 2 meters
A5 Straight, 5 meters
B2 Right angle, 2 meters
B5 Right angle, 5 meters
BOX10
CODE
Extension Cable Length F
( Cable option)
_ _ _
In inches
Ex.: 060=60 long
Note : Extension wires 12 long and less are
single stranded leads, 22 AWG
M12 Micro-Female Connector
Extension Cable Molded PVC
IP68/NEMA 6P, -40C to 90C
H
Other materials available. Consult factory.
www.intempco.com R26.0 Rev. B-01052011
RTD R50
Head Type RTD Assembly
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
MODEL
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX1
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX3
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
Other elements available. Consult factory.
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
2
_ -
3
-
4
_ -
5 6 MODEL
R_50 - _ _ _ _
1
- _ _ _ _ _ _ -
8
_ _ _ -
Custom Builder
7
_ _ _ -
BOX4
CODE
Probe Diameter D
062 1/16
125 1/8
187 3/16
250 1/4
312 5/16
375 3/8
500 1/2
BOX5
CODE
Probe Material
S Stainless steel 316/ 316L
I Inconel 600
BOX6
CODE
Fitting Type
D**S Welded to tube
W**S
Spring loaded, non-sealed
(D 1/4 probe only)
B**S
Spring loaded, o-ring sealed
(D 1/4 probe only)
Note :
**
Specify tting type. Some probe dia./
tting size combinations may not be possilbe.
14=1/4 NPT 38=3/8 NPT
12=1/2 NPT 34=3/4 NPT
U
D
Shown with
WA2 head
Process
connection
BOX8
CODE
Immersion Length U
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
BOX7
CODE
Head/ Termination
0
No head,
supplied with 6 single Teon leads
WA*
Aluminum die cast screw cover,
meets NEMA 4/ IP65 requirements
PO*
White polypropylene screw cover,
meets NEMA 4X/ IP65 requirements
BA2
Bakelite screw cover,
meets NEMA 4X/ IP65 requirements
AM
Mini aluminum die cast screw cover
3/8 NPT conduit, meets NEMA
4X/ IP65 requirements
AH*
Aluminum die cast ip cover, meets
NEMA 4/ IP65 requirements
EX*
Cast aluminum, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
CS*
Cast stainless steel 316 screw cover,
meets NEMA 4X/ IP66 requirements
CX*
Cast stainless steel, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
*2=1/ 2 NPT Conduit *3=3/ 4 NPT Conduit
www.intempco.com R27.0 Rev. B-01052011
RTD R51
Eurostyle Spring Loaded Head Type RTD Assembly
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
MODEL
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX1
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX3
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
Other elements available. Consult factory.
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
2
_ -
3
-
4
_ -
5 6 MODEL
R_51 - _ _ _ _
1
- _ _ _ _ _ _ -
8
_ _ _ -
Custom Builder
7
_ _ _ -
BOX4
CODE
Proctection Tube
Diameter D
375 3/8
BOX5
CODE
Probe Material
S Stainless steel 316/ 316L
I Inconel 600
U
D
Shown with
WA2 head
Protection
Tube
Process
connection
BOX6
CODE
Fitting Type
D38S 3/8- 18 NPT
D12S 1/2- 14 NPT
D34S 3/4- 14 NPT
D44S 1- 18 NPT
G12S ISO 228/1- G 1/2
BOX8
CODE
Immersion Length U
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
BOX7
CODE
Head/ Termination
0
No head,
supplied with 6 single Teon leads
WA*
Aluminum die cast screw cover,
meets NEMA 4/ IP65 requirements
PO*
White polypropylene screw cover,
meets NEMA 4X/ IP65 requirements
BA2
Bakelite screw cover,
meets NEMA 4X/ IP65 requirements
AM
Mini aluminum die cast screw cover
3/8 NPT conduit, meets NEMA
4X/ IP65 requirements
AH*
Aluminum die cast ip cover, meets
NEMA 4/ IP65 requirements
EX*
Cast aluminum, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
CS*
Cast stainless steel 316 screw cover,
meets NEMA 4X/ IP66 requirements
CX*
Cast stainless steel, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
*2=1/ 2 NPT Conduit *3=3/ 4 NPT Conduit
www.intempco.com R28.0 Rev. B-01052011
RTD R52
Adjustable Immersion RTD Assembly
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
MODEL
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX1
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX3
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
Other elements available. Consult factory.
2
_ -
3
-
4
_ -
5 6 MODEL
R_52 - _ _ _ _
1
- _ _ _ _ _ _ -
8
_ _ _ -
Custom Builder
7
_ _ _ -
BOX4
CODE
Probe Diameter D
250 1/4
312 5/16
375 3/8
500 1/2
BOX5
CODE
Probe Material
S Stainless steel 316/ 316L
I Inconel 600
L
D
Shown with
CS3 Head
Compression
tting
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
Other elements available. Consult factory.
BOX8
CODE
Probe Length L
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
BOX7
CODE
Head/ Termination
0
No head,
supplied with 6 single Teon leads
WA*
Aluminum die cast screw cover,
meets NEMA 4/ IP65 requirements
PO*
White polypropylene screw cover,
meets NEMA 4X/ IP65 requirements
BA2
Bakelite screw cover,
meets NEMA 4X/ IP65 requirements
AM
Mini aluminum die cast screw cover
3/8 NPT conduit, meets NEMA
4X/ IP65 requirements
AH*
Aluminum die cast ip cover, meets
NEMA 4/ IP65 requirements
EX*
Cast aluminum, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
CS*
Cast stainless steel 316 screw cover,
meets NEMA 4X/ IP66 requirements
CX*
Cast stainless steel, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
*2=1/ 2 NPT Conduit *3=3/ 4 NPT Conduit
Other ttings available. See www.intempco.com &
consult factory for pricing.
BOX6
CODE
Fitting Type
0 None
A**S Adjustable compression tting*
Ferrule material :
A = Stainless steel* B = Brass* T = Teon

* Not readjustable with metal ferrule

Fitting material :
S = Stainless steel B = Brass
Ex.: T14B = Teon

ferrule, 1/4 NPT, Brass tting

Process NPT size :
** 18=1/8 NPT 14=1/4 NPT
38=3/8 NPT 12=1/2 NPT
34=3/4 NPT 44=1 NPT
www.intempco.com R29.0 Rev. B-01052011
RTD R55
Spring Loaded RTD for Thermowell Assemblies
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
3. S4 circuit most accurate
MODEL
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX1
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX3
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
S4 Single, 4 wire
D2 Dual, 2 wire
D3 Dual, 3 wire
Other elements available. Consult factory.
2
_ -
3
-
4
_ -
5 6 MODEL
R_55 - _ _ _ _
1
- _ _ _ _ _ -
8
_ _ _ -
Custom Builder
BOX8
CODE
Probe Length A
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
7
_ _ _ -
BOX4
CODE
Probe Diameter D
250 1/4
6 6mm ( 0.236 )
BOX5
CODE
Probe Material
S Stainless steel 316/ 316L
I Inconel 600
BOX7
CODE
Head/ Termination
0
No head,
supplied with 6 single Teon leads
WA*
Aluminum die cast screw cover,
meets NEMA 4/ IP65 requirements
PO*
White polypropylene screw cover,
meets NEMA 4X/ IP65 requirements
BA2
Bakelite screw cover,
meets NEMA 4X/ IP65 requirements
AM
Mini aluminum die cast screw cover
3/8 NPT conduit, meets NEMA
4X/ IP65 requirements
AH*
Aluminum die cast ip cover, meets
NEMA 4/ IP65 requirements
EX*
Cast aluminum, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
CS*
Cast stainless steel 316 screw cover,
meets NEMA 4X/ IP66 requirements
CX*
Cast stainless steel, explosion proof,
CSA, FM Approval Class I, Div. 1,
Gps. B,C& D Class II, Div. 1,
Gps. E, F&G, NEMA 4X
*2=1/ 2 NPT Conduit *3=3/ 4 NPT Conduit
A
Shown with
WA3 and hex nipple
C
1.0 std.
BOX6
CODE
Extension Type & Length C
H _ _ Hex tting, C=1 only ( Ex.: H10)
B _ _
Hex tting, o-ring sealed
C=1 only ( Ex.:B10)
N _ _ Nipple, C=2 std. ( Ex.: N20)
U _ _
Nipple/ Union/ Nipple
C=3 min. & std. ( Ex.: U30)
* In 0.1 Increments
Notes : 1. Hex tting is preferable for assemblies.
2. For NUN assembly C=3 is std. & min. )
3. Stainless steel is std.
Nipple/ Union/ Nipple Nipple
BOX2
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
( Shown with spring compressed)
Thermowell shown for reference,
ordered separately
BOX8
CODE
Probe Length A
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
Ex.: 120=12 long
www.intempco.com R30.0
RTD RMR25
RTD Assembly
w/ HirschMann Plug
Rev. B-01052011
L
1.9
1.1
2.0
D
1.0
C
1.0 Std.
C
1.0 Std.
L L
Shown with xed immersion
and C=N00
Fixed tting
Compression tting Stop collar * Fixed tting
Note : 1. Dual RTDs require 0.187 O.D. min.
2. S3 industry standard circuit
BOX1
CODE
Temperature Range
L
Low temperature
-50 to 200C ( -58/ 392F)
M
Medium temperature
-50 to 400C ( -58/ 752F)
H
High temperature
-200 to 600C ( -328/ 1112F)
BOX2
CODE
Element Type
P
100 @ 0C, =0.00385
DIN EN 60751
T
1000 @ 0C, =0.00385
DIN EN 60751
BOX4
CODE
RTD Circuit Type
S2 Single, 2 wire
S3 Single, 3 wire
Other elements available. Consult factory.
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
Other tolerances available. Consult factory.
Custom Builder
BOX7
CODE
Probe Length L
_ _ _
In 0.1 increments
Ex.: 065=6.5 long
BOX8
CODE
Extension Cold Leg
Length C
N _ _
In 0.1 increments ( 1.0 Std. )
Ex.: N10=1.0 long
BOX6
CODE
Probe Material
S Stainless steel 316/ 316L
Other materials available. Consult factory.
BOX5
CODE
Probe Diameter D
B 1/8
C 3/16
D 1/4
F 3/ 8
H 1/ 2
Other diameters available. Consult factory.
* No stop collar option , C=N00
Stop collar recommended for temperature above 100
o
C
2
_ -
3
-
4
_ -
5 6 MODEL
RMR25 - _ _ _
1
- _ _ -
8
_ _ _ -
7
_ _ _ -
9
_ _ _ _ -
BOX9
CODE
Fitting Type
0 None
A**S Adjustable tting *
Ferrule material :
A = Stainless steel* B = Brass* T = Teon

* Not readjustable with metal ferrule

Fitting material :
S = Stainless steel B = Brass
Ex.: T14B = Teon

ferrule, 1/4 NPT, Brass tting

F**S Fixed tting ( SS316)
Process NPT size :
** 18=1/8 NPT 14=1/4 NPT
38=3/8 NPT 12=1/2 NPT
34=3/4 NPT
RTD Industrial Series
www.intempco.com R31.0 Rev. B-01052011
Notes :
www.intempco.com R32.0
RTDs
Tolerance & Accuracy
Rev. B-01052011
Detector Tolerance and Accuracy
The two most important factors affecting detector
tolerance are deviation from the nominal resistance
value at 0C and variation in the temperature coefcient
( Alpha) of the platinum wire. The rst factor, deviation
from R0, is a direct result of the manufacturing method
and a tolerance of 0.01% is achievable. In the case of
Alpha variation, the wire manufacturer dictates to a large
extent the nal values obtained. However, manufacturing
processes do cause changes in the metal and it is essential
to have complete control of every stage of production in
order to guarantee minimum deviation from specication.
Detectors supplied by Intempco have close control of
manufacturing techniques and critical selection of materials
resulting in typical Alpha deviation of less than
0.000003C
-1
.
This ensures the very highest conformance to the
temperature/ resistance characteristicts thus giving full
condence in detector interchangeability and allowing
critical measurements, such as determination of small
temperature differentials, to be made with accuracy,
stability and repeatability.
Intempco builds PRTs ( Platinum Resistance Thermometer ) to
meet DIN EN 60751. This standard denes the PRTs temperature
coefcient ( TC) as :
=[ R100-R0 ] / [ R0 * 100C]
conventially written as :
=3.851 x 10
-3
C
-1
Where: R0 = Resistance at 0C
R100 = Resistance at 100C
Standard R0 values for Intempco PRTs are 100 and 1000 .
Other values are available.
Intempco PRTs are available in tolerance classes as dened by
DIN EN 60751 and shown in table 1.
Other standards may be available. Table 2 lists some of these
standards which are less common today. Consult Intempco
engineering support team for specic requirements.
Table 1 : Thermometer Tolerance Classes per DIN EN 60751
Resistance Tolerance As a Function of Absolute
Tolerance Classes Tolerance @ 0C Value of Temperature in Deg. C
Class AA 0.04% ( 0.1 C) [ 0.1 + ( 0.0017 * | t | ) ]
Class A 0.06% ( 0.15 C) [ 0.15 + ( 0.002 * | t | ) ]
Class B 0.12% ( 0.3 C) [ 0.3 + ( 0.005 * | t | ) ]
Class C 0.23% ( 0.6 C) [ 0.6 + ( 0.01 * | t | ) ]
Table 2 : Standard for RTDs
ALPHA : Average
Temperature Nominal
Coefcient of Resistance
Organization Standard Resistance ( 0C)
-1
at 0C
British Standard BS 1904 : 1984 0.003850 100
Deutshen Institut fur Normung DIN 43760 : 1980 0.003850 100
International Electrotechnical Commission IEC 751 : 1995 ( Amend. 2) 0.00385055 100
Scientic Apparatus Manufacturers of America SAMA RC-4-1966 0.003923 98.129
Japanese Standard JIS C1604-1981 0.003916 100
American Society for Testing & Materials ASTM E1137 0.00385055 100
RTDs
Element Lead Conguration
www.intempco.com R33.0 Rev. B-01052011
Material Description
316 Stainless Steel : ( 6% Chromium-10% Nickel ) is a
material that has improved resistance to
corrosion as compared to 304SS or 310SS with
improved oxidation resistance and a higher hot
strength than 304SS. Maximum operating
temperature 926C ( 1700F).
Inconel 600 : ( 72% Nickel-17% Chromium) is a material
that is readily available and has outstanding
resistance to oxidation, corrosion and scaling.
Should not be used in the presence of sulfur
above 1600F. Maximum operating temperature
1204C (2200F).
Monel 400 : ( 67% Nickel-30% Copper ) is highly
resistant to atmospheric action, seawater,
steam, foodstuffs, and many industrial
chemicals. It deteriorates rapidly in presence
of moist chlorine and ferric, stannic, or mercuric
salts in acid solutions. It must not be exposed
when hot to molten metals, sulfur or gaseous
products of combustion containing sulfur.
Maximum operating temperature 982C
( 1800F).
Hastelloy C : ( 51% Nickel-19% Molybdenum-17% Chromium)
is exceptionally resistant to corrosion by hot
concentrated acids such as hydrochloric,
sulfuric, and nitric. Hastelloy C has good
strength at elevated temperature.
CODE
Lead conguration S2 provides one
connection to each end of the sensor. This
construction is suitable where the
resistance of the run of lead wire may be
considered as an additive constant in the
circuit, and particularly where the changes
in lead resistance due to ambient
temperature changes may be ignored.
S2
CODE
Lead conguration S3 provides two
connections on one side of the sensor and
one to the other side of the sensor. This
construction is used for measurments
of the highest precision and should be
prefered to S2 for high accuracy
measurment.
S3
CODE
Lead conguration S4 provides two
connections to each end of the sensor.
This construction is used for measurments
of the highest precision and should be
prefered to S3 for high accuracy
measurment.
S4
( 1)
Single Element Lead Conguration
CODE
Lead conguration D2 is similar to
Lead conguration S2. Two element
construction provides 2 seperate signals
for instrumentation purposes or as
back-up.
D2
CODE
Lead conguration D3 is similar to
Lead conguration S3. Two element
construction provides 2 seperate signals
for instrumentation purposes or as
back-up.
D3
CODE
Lead conguration D4 is similar to
Lead conguration S4. Two element
construction provides 2 seperate signals
for instrumentation purposes or as
back-up.
D4
Dual Element Lead Conguration
CODE Element Type
P
100 @ 0C, =0.00385
DINEN 60751
R
100 @ 0C, =.003916
JEMIMA ( JIS)
T
1000 @ 0C, =0.00385
DINEN 60751
U 1000 @ 0C, =0.00375
Element Wiring Ordering Code
Element Ordering Code
( 3) ( 3)
( 4)
( 1)
( 3)
( 4)
( 1)
( 3)
( 2)
( 4)
( 1)
( 3)
( 2)
( 7)
( 6)
( 4)
( 1)
( 3)
( 2)
( 7)
( 6)
( 4)
( 1)
( 3)
( 2)
( 5)
( 8)
BOX3
CODE
Element Tolerance
1 0.12% ( 0.3C) @ 0C, Class B
2 0.06% ( 0.15C) @ 0C, Class A
3 0.04% ( 0.1C) @ 0C, Class AA
4 0.23% ( 0.6C) @ 0C, Class C
WHITE
RED
RED
RED
WHITE
RED
RED
WHITE
WHITE
RED
BLACK
YELLOW
WHITE
BLACK ( GREY)
BLACK ( GREY)
RED
WHITE
RED
YELLOW
BLACK ( GREY)
BLACK ( GREY)
RED
RED
WHITE
WHITE
YELLOW
YELLOW
www.intempco.com R34.0
RTDs
Temperature vs Resistance Table, -200C to 800C
R0 = 100 , =0.00385, DIN EN 60751
Rev. B-01052011
C
-200
-199
-198
-197
-196
-195
-194
-193
-192
-191
-190
-189
-188
-187
-186
-185
-184
-183
-182
-181
-180
-179
-178
-177
-176
-175
-174
-173
-172
-171
-170
-169
-168
-167
-166
-165
-164
-163
-162
-161
-160
-159
-158
-157
-156
-155
-154
-153
-152
-151
-150
-149
-148
-147
-146
-145
-144
-143
-142
-141
-140
-139
-138
-137
-136
-135
-134
-133
-132
-131
-130
-129
18.52
18.95
19.38
19.82
20.25
20.68
21.11
21.54
21.97
22.40
22.83
23.25
23.68
24.11
24.54
24.97
25.39
25.82
26.24
26.67
27.10
27.52
27.95
28.37
28.80
29.22
29.64
30.07
30.49
30.91
31.34
31.76
32.18
32.60
33.02
33.44
33.86
34.28
34.70
35.12
35.54
35.96
36.38
36.80
37.22
37.64
38.05
38.47
38.89
39.31
39.72
40.14
40.56
40.97
41.39
41.80
42.22
42.63
43.05
43.46
43.88
44.29
44.70
45.12
45.53
45.94
46.36
46.77
47.18
47.59
48.00
48.42
C
-128
-127
-126
-125
-124
-123
-122
-121
-120
-119
-118
-117
-116
-115
-114
-113
-112
-111
-110
-109
-107
-106
-105
-104
-103
-102
-101
-100
-99
-98
-97
-96
-95
-94
-93
-92
-91
-90
-89
-88
-87
-86
-85
-84
-83
-82
-81
-80
-79
-78
-77
-76
-75
-74
-73
-72
-71
-70
-69
-68
-67
-66
-65
-64
-63
-62
-61
-60
-59
-58
-57
48.83
49.24
49.65
50.06
50.47
50.88
51.29
51.70
52.11
52.52
52.93
53.34
53.75
54.15
54.56
54.97
55.38
55.79
56.19
56.60
57.01
57.41
57.82
58.23
58.63
59.04
59.44
59.85
60.26
60.66
61.07
61.47
61.88
62.28
62.68
63.09
63.49
63.90
64.30
64.70
65.11
65.51
65.91
66.31
66.72
67.12
67.52
67.92
68.33
68.73
69.13
69.53
69.93
70.33
70.73
71.13
71.53
71.93
72.33
72.73
73.13
73.53
73.93
74.33
74.73
75.13
75.53
75.93
76.33
76.73
77.12
77.52
C
-56
-55
-54
-53
-52
-51
-50
-49
-48
-47
-46
-45
-44
-43
-42
-41
-40
-39
-38
-37
-36
-35
-34
-33
-32
-31
-30
-29
-28
-27
-26
-25
-24
-23
-22
-21
-20
-19
-18
-17
-16
-15
-14
-13
-12
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
77.92
78.32
78.72
79.11
79.51
79.91
80.31
80.70
81.10
81.50
81.89
82.29
82.69
83.08
83.48
83.87
84.27
84.67
85.06
85.46
85.85
86.25
86.64
87.04
87.43
87.83
88.22
88.62
89.01
89.40
89.80
90.19
90.59
90.98
91.37
91.77
92.16
92.55
92.95
93.34
93.73
94.12
94.52
94.91
95.30
95.69
96.09
96.48
96.87
97.26
97.65
98.04
98.44
98.83
99.22
99.61
100.00
100.39
100.78
101.17
101.56
101.95
102.34
102.73
103.12
103.51
103.90
104.29
104.68
105.07
105.46
105.85
C
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
106.24
106.63
107.02
107.40
107.79
108.18
108.57
108.96
109.35
109.73
110.12
110.51
110.90
111.29
111.67
112.06
112.45
112.83
113.22
113.61
114.00
114.38
114.77
115.15
115.54
115.93
116.31
116.70
117.08
117.47
117.86
118.24
118.63
119.01
119.40
119.78
120.17
120.55
120.94
121.32
121.71
122.09
122.47
122.86
123.24
123.63
124.01
124.39
124.78
125.16
125.54
125.93
126.31
126.69
127.08
127.46
127.84
128.22
128.61
128.99
129.37
129.75
130.13
130.52
130.90
131.28
131.66
132.04
132.42
132.80
133.18
133.57
C
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
133.95
134.33
134.71
135.09
135.47
135.85
136.23
136.61
136.99
137.37
137.75
138.13
138.51
138.88
139.26
139.64
140.02
140.40
140.78
141.16
141.54
141.91
142.29
142.67
143.05
143.43
143.80
144.18
144.56
144.94
145.31
145.69
146.07
146.44
146.82
147.20
147.57
147.95
148.33
148.70
149.08
149.46
149.83
150.21
150.58
150.96
151.33
151.71
152.08
152.46
152.83
153.21
153.58
153.96
154.33
154.71
155.08
155.46
155.83
156.20
156.58
156.95
157.33
157.70
158.07
158.45
158.82
159.19
159.56
159.94
160.31
160.68
C
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
161.05
161.43
161.80
162.17
162.54
162.91
163.29
163.66
164.03
164.40
164.77
165.14
165.51
165.89
166.26
166.63
167.00
167.37
167.74
168.11
168.48
168.85
169.22
169.59
169.96
170.33
170.70
171.07
171.43
171.80
172.17
172.54
172.91
173.28
173.65
174.02
174.38
174.75
175.12
175.49
175.86
176.22
176.59
176.96
177.33
177.69
178.06
178.43
178.79
179.16
179.53
179.89
180.26
180.63
180.99
181.36
181.72
182.09
182.46
182.82
183.19
183.55
183.92
184.28
184.65
185.01
185.38
185.74
186.11
186.47
186.84
187.20
C
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
187.56
187.93
188.29
188.66
189.02
189.38
189.75
190.11
190.47
190.84
191.20
191.56
191.92
192.29
192.65
193.01
193.37
193.74
194.10
194.46
194.82
195.18
195.55
195.91
196.27
196.63
196.99
197.35
197.71
198.07
198.43
198.79
199.15
199.51
199.87
200.23
200.59
200.95
201.31
201.67
202.03
202.39
202.75
203.11
203.47
203.83
204.19
204.55
204.90
205.26
205.62
205.98
206.34
206.70
207.05
207.41
207.77
208.13
208.48
208.84
209.20
209.56
209.91
210.27
210.63
210.98
211.34
211.70
212.05
For other R0 values, multiply resistance value in table by R0 / 100
RTDs
Temperature vs Resistance Table, -200C to 800C
R0 = 100 , =0.00385, DIN EN 60751
www.intempco.com R35.0 Rev. B-01052011
C
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
212.05
212.41
212.76
213.12
213.48
213.83
214.19
214.54
214.90
215.25
215.61
215.96
216.32
216.67
217.03
217.38
217.74
218.09
218.44
218.80
219.15
219.51
219.86
220.21
220.57
220.92
221.27
221.63
221.98
222.33
222.68
223.04
223.39
223.74
224.09
224.45
224.80
225.15
225.50
225.85
226.21
226.56
226.91
227.26
227.61
227.96
228.31
228.66
229.02
229.37
229.72
230.07
230.42
230.77
231.12
231.47
231.82
232.17
232.52
232.87
233.21
233.56
233.91
234.26
234.61
234.96
235.31
235.66
236.00
236.35
236.70
237.05
C
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
237.40
237.74
238.09
238.44
238.79
239.13
239.48
239.83
240.18
240.52
240.87
241.22
241.56
241.91
242.26
242.60
242.95
243.29
243.64
243.99
244.33
244.68
245.02
245.37
245.71
246.06
246.40
246.75
247.09
247.44
247.78
248.13
248.47
248.81
249.16
249.50
249.85
250.19
250.53
250.88
251.22
251.56
251.91
252.25
252.59
252.93
253.28
253.62
253.96
254.30
254.65
254.99
255.33
255.67
256.01
256.35
256.70
257.04
257.38
257.72
258.06
258.40
258.74
259.08
259.42
259.76
260.10
260.44
260.78
261.12
261.46
261.80
C
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
262.14
262.48
262.82
263.16
263.50
263.84
264.18
264.52
264.86
265.20
265.53
265.87
266.21
266.55
266.89
267.22
267.56
267.90
268.24
268.57
268.91
269.25
269.59
269.92
270.26
270.60
270.93
271.27
271.61
271.94
272.28
272.61
272.95
273.29
273.62
273.96
274.29
274.63
274.96
275.30
275.63
275.97
276.30
276.64
276.97
277.31
277.64
277.98
278.31
278.64
278.98
279.31
279.64
279.98
280.31
280.64
280.98
281.31
281.64
281.98
282.31
282.64
282.97
283.31
283.64
283.97
284.30
284.63
284.97
285.30
285.63
285.96
C
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
286.29
286.62
286.95
287.29
287.62
287.95
288.28
288.61
288.94
289.27
289.60
289.93
290.26
290.59
290.92
291.25
291.58
291.91
292.24
292.56
292.89
293.22
293.55
293.88
294.21
294.54
294.86
295.19
295.52
295.85
296.18
296.50
296.83
297.16
297.49
297.81
298.14
298.47
298.80
299.12
299.45
299.78
300.10
300.43
300.75
301.08
301.41
301.73
302.06
302.38
302.71
303.03
303.36
303.69
304.01
304.34
304.66
304.98
305.31
305.63
305.96
306.28
306.61
306.93
307.25
307.58
307.90
308.23
308.55
308.87
309.20
309.52
C
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
309.84
310.16
310.49
310.81
311.13
311.45
311.78
312.10
312.42
312.74
313.06
313.39
313.71
314.03
314.35
314.67
314.99
315.31
315.64
315.96
316.28
316.60
316.92
317.24
317.56
317.88
318.20
318.52
318.84
319.16
319.48
319.80
320.12
320.43
320.75
321.07
321.39
321.71
322.03
322.35
322.67
322.98
323.30
323.62
323.94
324.26
324.57
324.89
325.21
325.53
325.84
326.16
326.48
326.79
327.11
327.43
327.74
328.06
328.38
328.69
329.01
329.32
329.64
329.96
330.27
330.59
330.90
331.22
331.53
331.85
332.16
332.48
C
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
332.79
333.11
333.42
333.74
334.05
334.36
334.68
334.99
335.31
335.62
335.93
336.25
336.56
336.87
337.18
337.50
337.81
338.12
338.44
338.75
339.06
339.37
339.69
340.00
340.31
340.62
340.93
341.24
341.56
341.87
342.18
342.49
342.80
343.11
343.42
343.73
344.04
344.35
344.66
344.97
345.28
345.59
345.90
346.21
346.52
346.83
347.14
347.45
347.76
348.07
348.38
348.69
348.99
349.30
349.61
349.92
350.23
350.54
350.84
351.15
351.46
351.77
352.08
352.38
352.69
353.00
353.30
353.61
353.92
354.22
354.53
354.84
C
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
355.14
355.45
355.76
356.06
356.37
356.67
356.98
357.28
357.59
357.90
358.20
358.51
358.81
359.12
359.42
359.72
360.03
360.33
360.64
360.94
361.25
361.55
361.85
362.16
362.46
362.76
363.07
363.37
363.67
363.98
364.28
364.58
364.89
365.19
365.49
365.79
366.10
366.40
366.70
367.00
367.30
367.60
367.91
368.21
368.51
368.81
369.11
369.41
369.71
370.01
370.31
370.61
370.91
371.21
371.51
371.81
372.11
372.41
372.71
373.01
373.31
373.61
373.91
374.21
374.51
374.81
375.11
375.41
375.70
For other R0 values, multiply resistance value in table by R0 / 100
Intempco Controls Ltd.
880 Selkirk Ave. Pointe-Claire ( QC) H9R 3S3
Tel.: ( 514) 426-0488 Fax : ( 514) 426-0522
www.intempco.ca
Intempco USA, Inc.
165 State Street, Suite C, Hackensack, NJ 07601
Tel.: ( 201) 343-6331 Fax : ( 201) 343-6336
www.intempcousa.com
Temperature Level
Humidity
PHP01 - RH Transmitter
Low cost OEM and HVAC relative humidity probe
4-20mA output standard
Factory calibrated 5% to 95%RH
Digital re-calibration, no potentiometers needed
The PHP01 is a programmable relative humidity probe which provides an accurate analog
output directly proportional to 0...100% RH.
LTX series - Capacitance Level Transmitter
Micro-processor based
Continuous loop powered 4-20mA operation
Heavy duty industrial design
Non-interactive zero and span calibration
Built-in temperature compensation
Intempco LTX series capacitance level transmitters are highly reliable micro-processor based
sensors designed to measure levels of liquids and certain dry bulk media in metal tanks.
DTG03 - Digital Temperature Gauge
Large 4-digit red LED display
4-20mA programmable linearized signal output
Field re-programmable with PC interface module and software
Easy installation with various mounting congurations
All stainless steel 316 construction
The DTG03 Digital Temperature Gauges are a complete solution for most industrial
temperature monitoring and temperature indicating applications. Of high quality construction,
these gauges feature a bright and large 4-digit red LED display with an analog 4-20mA
output. Based on Intempcos patented MIST technology, they are designed for optimum
accuracy and performance. The DTG03 is an ideal replacement for bi-metal, liquid bulb and
gas thermometers.
Other Intempco Products