Calculating strut-and-tie models with

Fachwerk and Fachwerk3D

Program documentation
Adrian Vontobel
June 30, 2010
CONTENTS 2
Contents
1 The program Fachwerk 3
1.1 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 Dierence to other programs . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.4 Fachwerk is not suitable for ... . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Features 6
2.1 Easy to use graphical user interface . . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Equilibrium only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 No unnecessary bearings or members . . . . . . . . . . . . . . . . . . . . . . 7
2.4 Failure mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.5 More features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.6 Licence GPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7 Program development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3 How to use the program 9
3.1 Quick start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2 Selection, mouse, layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.3 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.4 Background drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.5 Model documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4 The program Fachwerk3D 15
4.1 Less is more . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.2 Background drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.3 Model documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5 Enhanced functions 17
5.1 Find node position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.2 Propose member forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.3 Automatic model reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6 Strut-and-tie models 21
6.1 Proceeding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.2 Typical patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.3 Examples: calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6.4 Examples: visualisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
1 THE PROGRAM FACHWERK 3
1 The program Fachwerk
1.1 Purpose
Fachwerk is aimed at structural engineers who analyse and design reinforced concrete
structures. It intends to simplify the application of discontinuous stress elds and strut-
and-tie models. The program calculates strut-and-tie models. It only uses equilibrium
conditions. Thus, unlike common programs, it does not assume elastic material behaviour.
If the modelled system is hyperstatic, Fachwerk will nevertheless calculate the forces
of the members that are determinate. One can assign forces to the remaining members.
If more forces than needed to accomplish a statically determinate system are assigned to
members, and the equilibrium condition is not fullled, Fachwerk will indicate that the
system is inconsistent.
Figure 1: Statically indeterminate model
The example in Fig. 1 shows a strut-and-tie model of a beam with three bearings. The
model is statically indeterminate. The members represented by thick lines are determinate:
black indicates ones with tensile force, green ones under compression. The remaining
members are still indeterminate (indicated by thin black lines). The number in the status
eld on the bottom at the right side points out that one of these members can be set.
1 THE PROGRAM FACHWERK 4
Figure 2: Calculation completed
The selected member (highlighted yellow) shall be set to 300 kN. Members with assigned
force are drawn in blue colour. Now the calculation can be started again. Figure 2 displays
the complete strut-and-tie model, all members are determinate.
1.2 Background
Discontinuous stress eld models are suitable for the design and detailing of reinforced
concrete structures. The method (based on the theory of plasticity) is graphic and clear.
The statical action and the strength can be analysed in a consistent manner [1]. In many
cases, this method can easily be applied by hand. Sometimes, however, a computer
program would be helpful to calculate the model. The time saved could be used for the
thorough development of stress elds and for the detailing.
To the authors knowledge, there is no publicly available computer program for the cal-
culation of general plane stress elds. A practicable procedure is to rst draw the stress
eld model and then to convert it into a strut-and-tie model. The members of the truss
represent the resultants of the compression elds and of the reinforcement. This approach
is applicable in many cases.
1 THE PROGRAM FACHWERK 5
1.3 Dierence to other programs
Every program for frame analysis can calculate trusses and, therefore, is able to nd a
possible solution that respects the equilibrium conditions. However, there is a problem if
the system is statically indeterminate. The common linear-elastic programs calculate the
forces according to the rigidity of the members. For the calculation of strut-and-tie models
(for reinforced concrete structures) however, the rigidity of the members has no meaning
and should, consequently, not be used. Instead, one may want to assign the yielding force
of a number of reinforcement bars to a tie of the model. This is what Fachwerk is
designed for.
1.4 Fachwerk is not suitable for ...
calculations of deformations.
The program only uses equilibrium conditions. It does not know anything about
elastic deformations.
calculations of bending moments.
The program only knows compressive and tensile forces.
steel constructions
While Fachwerk can calculate the axial forces of truss beams, there are better
suited programs for this purpose.
2 FEATURES 6
2 Features
2.1 Easy to use graphical user interface
The intuitive interface will allow you to work productively in very little time. The input
of the model is straight forward.
3
5
7
8
0
5
1
1
5
7
420

4
9
5

1
0
8
5

8
4
7
8
0
5
7
3
5
70

9
9
Figure 3: Statically determinate example (corbel)
2.2 Equilibrium only
Only the equilibrium conditions are applied. Just set the member forces (for instance the
yielding force) in statically indeterminate models. You dont have to assign any member
stiness.
3
5
7
2
9
2
6
4
3
215
285
420

4
9
5

6
4
2
2
9
2

7
0
5

2
1
5
215
285

3
0
4
3
2
0

1
2
6
Figure 4: Statically indeterminate example (corbel)
2 FEATURES 7
2.3 No unnecessary bearings or members
Fachwerk allows unstable, kinematic models, as long as equilibrium conditions are ful-
lled! Supports can be omitted if they are not necessary for equilibrium of the respective
load case. Also, there is no need to insert unstressed members.
1
0
1
0
29

2
9

2
9

2
9

2
9
29 29

2
9

2
9

2
9

2
9
29
1
5
1
5
1
5
15
1
5
1
5
5
1
5
1
5
15
1
5
1
5
1
0
0
1
0
0
1
0
0
1
0
0
1
0
0
2
0
0
3
5
0
3
5
0

4
5
1

4
0
4
378 378

4
0
4

4
5
1
388 388
Figure 5: Unstable equilibrium
This feature is quite useful for the calculation of strut-and-tie models, because very often
the instability only applies to the model, whereas the real construction is stable. When
calculating spatial strut-and-tie models (see chapter 4), the nodes of a concrete web do
not have to be supported perpendicularly to webs plane.
2.4 Failure mechanisms
Failure mechanisms are detected and drawn. That way it is easy to nd missing members
in the model or to prove that a system is kinematic and contradicts equilibrium.
Figure 6: Mechanism
2 FEATURES 8
2.5 More features
norm independent
Fachwerk can be used in conjunction with various construction norms, as the
program only applies the equilibrium conditions to the model. Nevertheless, the use
of SI (metric) units (kN, m) is assumed.
drawings
Drawings can be displayed in the background of the model. The CAD format dxf
or the simple text based bgd format (see chapter 3.4) are supported.
print to scale
1:50, 1:100, 1:20
documentation
A documentation of the model (node coordinates, members, forces, etc.) can be
printed easily.
platform independent
Fachwerk runs on every platform which runs Java: Linux, Windows, Mac OS X,
Unix
languages
Fachwerk has been translated to English, German and French.
2.6 Licence GPL
Fachwerk and Fachwerk3D are subject to the GNU General Public License Version 2.
The text of the licences
1
is distributed together with the program.
All results must be veried carefully in order to state that they are plausible! Therefore,
the user must have the appropriate knowledge of statics in order to use the program. The
licence disclaims all liability of the author.
2.7 Program development
Fachwerk has been used since 2003. The intended functionality is complete. It is planed
to maintain the program (bug xes, small improvements, etc.). It is recommended to
check http://fachwerk.berlios.de for a new version from time to time.
The current versions are:
Fachwerk 0.4.1 (May 2010)
Fachwerk3D 0.4.1 (May 2010)
1
The math library used is subject to its own Open Source licence.
REFERENCES 29
References
[1] Design of Concrete Structures with Stress Fields
A. Muttoni / J. Schwartz / B. Th urlimann, Birkhauser, 1997
[2] Tragverhalten von Stahlbeton
P. Marti / M. Alvarez / W. Kaufmann / V. Sigrist, Institute of Structural Engineering,
ETH Zurich, 1999
[3] Konstruieren im Stahlbetonbau
J. Schlaich / K. Schafer, Stuttgart, Betonkalender, 1998
[4] Detailing for Post-Tensioning
VSL report series 3, VSL International Ltd., 1991
[5] Beurteilung der Tragsicherheit bestehender Betonbauten
Ph. Stoel / P. Marti, Institute of Structural Engineering, ETH Zurich, 1999
[6] Experimental Investigation of Shear Diaphragms in Reinforced Concrete Slabs
Joost Meyboom, Institute of Structural Engineering, ETH Zurich, 2001
[7] Topologie des champs de contraintes pour le dimensionnement des structures en beton
arme
Neven Kostic, Laboratoire de constuction en beton, EPFL Lausanne, 2009