Scribd
Upload
630 views

Aws d1.5 PQR

This Welding Performance Qualification Record documents welder David Turk's qualification using the shielded metal arc welding (SMAW) process. It specifies the welding code, company information, welder identification, base metal used, welding variables, and test results. The record shows that Turk passed visual inspection and fillet weld testing to be qualified in the 3F, H, and V positions for unlimited thickness steel plate using E7018 electrodes.

Uploaded by

jacquesmayol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
630 views

Aws d1.5 PQR

This Welding Performance Qualification Record documents welder David Turk's qualification using the shielded metal arc welding (SMAW) process. It specifies the welding code, company information, welder identification, base metal used, welding variables, and test results. The record shows that Turk passed visual inspection and fillet weld testing to be qualified in the 3F, H, and V positions for unlimited thickness steel plate using E7018 electrodes.

Uploaded by

jacquesmayol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 2

Welding Performance Qualification Record (WPQR)

Welding Code: AWS D1.5


Company Name: Quinn Construction, Inc.
Company Address: 1321 77th Street, East Palmetto, Florida, 34221, USA
Welder's Name: David Turk Identification No: 5240
Type of welder:
Welder
Welding Performance Qualification Record WPQR No. DT-5240 QC-11-SMAW-
1
Qualification Date:
5/4/13
Welding Procedure Specification WPS No. QC-11-SMAW-1 Rev. 0
BASE METALS USED
Material Specification, Type or Grade: ASTM A 36 (T<= 3/4 in. [20 mm])
Plat
e
Pip
e
Box
Tube Sheet
Welded to
Material Specification, Type or Grade: ASTM A 36 (T<= 3/4 in. [20 mm])
Plat
e
Pip
e
Box
Tube Sheet
Variables Actual Values Used Qualification Range
Welding Process SMAW
SMA
W
Process Type Manual
Manu
al
Electrode (Single or Multiple) Single Single
Current Type/Polarity DCEP
Backing (Yes or No) Yes Yes
Testing Position(s) and Qualified Welding Position(s):
Groove n/a n/a
Fillet 3F
F, H,
V
Vertical Progression Uphill Uphill
Plug or Slot Welds
Base Metals Thickness in (mm):
Groove n/a n/a
Fillet
1/2 in. (12 mm), Fig.
5.21
Unlim
ited
Plug or Slot Welds n/a n/a
Base Metals Diameter in (mm) (Pipe or Tube):
Groove n/a n/a
Fillet
Plate
tested n/a
Filler Metal Specification (SFA) A5.1
Filler Metal Classification (AWS Classified) E7018 Any AWS A5 Class Approved
Filler Metal F-Number 4 4 (low-hydrogen only)
Gas/Flux (SAW) n/a n/a
Other Variable (coating type/thickness, etc.) n/a n/a
Results
Visual Inspection of Completed Weld (D1.5, 6.26.1): Acceptable
YE
S NO
Guided Bend Test Type and Results (D1.5, 5.27.3): n/a
Result and Comments:
Fillet-Weld Test Results (D1.5, 5.27.4 and 5.27.6):
Appearance:
Acceptable Fillet Size in (mm): .385
Fracture Test Root Penetration: Acceptable Macroetch: Acceptable
(Describe the location, nature, and size of any crack or tearing of the specimen.)
Result and Comments: Resource id #9
Inspected by: Jonathan B. Stringer Test Number: G-0239-S
Organization: Renegade Testing & Inspection Inc. Date: 5-4-2013
Alternative * Radiographic Test Results (D1.5, 5.26.1) : * In lieu of Guided Bend Test, except for GMAW-S
Film Identification No. Results Remarks
Film Identification
No. Results Remarks
n/a
Film interpreted by:
n/a
Test Number:
n/a
Organization: n/a Date: n/a
Other information: n/a
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in conformance with
the requirements of AWS D1.5M/D1.5:2010, Bridge Welding Code.
Manufacturer/ Contractor Authorized By:
Welding Engineer
Name: Jonathan B. Stringer Name:
Title: CWI - 10081211 Title:
Signature: Signature:
Date: 5-4-13 Date:

You might also like