0% found this document useful (0 votes)
160 views5 pages

Multiple Choice Quiz

The document is a multiple choice quiz results report. It shows that the user answered 21 out of 34 questions correctly, earning a grade of 62%. It then lists each question, the correct answer, and whether the user answered correctly or incorrectly. The questions cover topics about signals, data transmission, analog and digital signals, and transmission impairments.

Uploaded by

Quoc Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
160 views5 pages

Multiple Choice Quiz

The document is a multiple choice quiz results report. It shows that the user answered 21 out of 34 questions correctly, earning a grade of 62%. It then lists each question, the correct answer, and whether the user answered correctly or incorrectly. The questions cover topics about signals, data transmission, analog and digital signals, and transmission impairments.

Uploaded by

Quoc Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Ngy29 thng 3 nm 2014 Multiple Choice Quiz

http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 1/5
Multiple Choice Quiz
(See related pages)
Results Reporter
Out of 34 questions, you answered 21 correctly, for a final grade of 62%.
21 correct (62%)
12 incorrect (35%)
1 unanswered (3%)
0 ungraded (0%)
Please answer all questions.
Your Results:
The correct answer for each question is indicated by a .
1
CORRECT
Before data can be transmitted, they must be transformed to ________.
A)periodic signals
B)electromagnetic signals
C)aperiodic signals
D)low-frequency sine waves
2
CORRECT
A periodic signal completes one cycle in 0.001 s. What is the frequency?
A)1 Hz
B)100 Hz
C)1 KHz
D)1 MHz
3
CORRECT
In a frequency-domain plot, the horizontal axis measures the ________.
A)peak amplitude
B)frequency
C)phase
D)slope
4
CORRECT
In a time-domain plot, the horizontal axis is a measure of ________.
A)signal amplitude
B)frequency
C)phase
D)time
5
CORRECT
If the bandwidth of a signal is 5 KHz and the lowest frequency is 52 KHz, what is the highest frequency?
A)5 KHz
B)10 KHz
C)47 KHz
D)57 KHz
6
CORRECT
What is the bandwidth of a signal that ranges from 1 MHz to 4 MHz?
Course-wide Content
Glossary
Message Board
Chapter 3
Quizzes
Multiple Choice Quiz
More Resources
Flashcards
Selected Solutions
Animations
Home > Chapter 3 > Multiple Choice Quiz
Ngy29 thng 3 nm 2014 Multiple Choice Quiz
http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 2/5
A)4 MHz
B)1 KHz
C)3 MHz
D)none of the above
7
CORRECT
As frequency increases, the period ________.
A)decreases
B)increases
C)remains the same
D)doubles
8
INCORRECT
Given two sine waves A and B, if the frequency of A is twice that of B, then the period of B is ________ that of A.
A)one-half
B)twice
C)the same as
D)indeterminate from
9
CORRECT
A sine wave is ________.
A)periodic and continuous
B)aperiodic and continuous
C)periodic and discrete
D)aperiodic and discrete
10
CORRECT
If the maximum amplitude of a sine wave is 2 V, the minimum amplitude is ________ V.
A)2
B)1
C)-2
D)between -2 and 2
11
CORRECT
A signal is measured at two different points. The power is P
1
at the first point and P
2
at the second point. The dB is 0. This means ________.
A)P
2
is zero
B)P
2
equals P
1
C)P
2
is much larger than P
1
D)P
2
is much smaller than P
1
12
CORRECT
________ is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium.
A)Attenuation
B)Distortion
C)Noise
D)Decibel
13
INCORRECT
________ is a type of transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up
the signal.
A)Attenuation
B)Distortion
C)Noise
D)Decibel
14
INCORRECT
________ is a type of transmission impairment in which an outside source such as crosstalk corrupts a signal.
A)Attenuation
B)Distortion
C)Noise
Ngy29 thng 3 nm 2014 Multiple Choice Quiz
http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 3/5
D)Decibel
15
CORRECT
When propagation speed is multiplied by propagation time, we get the ________.
A)throughput
B)wavelength of the signal
C)distortion factor
D)distance a signal or bit has traveled
16
CORRECT
Data can be ________.
A)analog
B)digital
C)(a) or (b)
D)none of the above
17
CORRECT
_______ data are continuous and take continuous values.
A)analog
B)digital
C)(a) or (b)
D)none of the above
18
CORRECT
_______ data have discrete states and take discrete values.
A)Analog
B)Digital
C)(a) or (b)
D)None of the above
19
CORRECT
Signals can be ________.
A)analog
B)digital
C)either (a) or (b)
D)neither (a) nor (b)
20
UNANSWERED
_____ signals can have an infinite number of values in a range.
A)Analog
B)Digital
C)(a) or (b)
D)None of the above
21
CORRECT
_______ signals can have only a limited number of values.
A)Analog
B)Digital
C)(a) or (b)
D)None of the above
22
CORRECT
Frequency and period are ______.
A)inverse of each other
B)proportional to each other
C)the same
D)none of the above
23
INCORRECT
________is the rate of change with respect to time.
Ngy29 thng 3 nm 2014 Multiple Choice Quiz
http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 4/5
A)Amplitude
B)Time
C)Frequency
D)Voltage
24
CORRECT
_______ describes the position of the waveform relative to time 0.
A)Frequency
B)Phase
C)Amplitude
D)Voltage
25
CORRECT
A sine wave in the ______ domain can be represented by one single spike in the _____ domain.
A)time; frequency
B)frequency; time
C)time; phase
D)phase; time
26
INCORRECT
A _________ sine wave is not useful in data communications; we need to send a _______ signal.
A)composite; single-frequency
B)single-frequency; composite
C)single-frequency; double-frequency
D)none of the above
27
INCORRECT
The _____ of a composite signal is the difference between the highest and the lowest frequencies contained in that signal.
A)frequency
B)period
C)bandwidth
D)amplitude
28
INCORRECT
A(n)_________ signal is a composite analog signal with an infinite bandwidth.
A)digital
B)analog
C)either (a) or (b)
D)neither (a) nor (b)
29
INCORRECT
Baseband transmission of a digital signal is possible only if we have a ____ channel.
A)low-pass
B)bandpass
C)low rate
D)high rate
30
INCORRECT
If the available channel is a ____ channel, we cannot send a digital signal directly to the channel.
A)low-pass
B)bandpass
C)low rate
D)high rate
31
INCORRECT
For a ______ channel, the Nyquist bit rate formula defines the theoretical maximum bit rate.
A)noisy
B)noiseless
C)bandpass
D)low-pass
Ngy29 thng 3 nm 2014 Multiple Choice Quiz
http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 5/5
32 INCORRECT
For a ______ channel, we need to use the Shannon capacity to find the maximum bit rate.
A)noisy
B)noiseless
C)bandpass
D)low-pass
33
CORRECT
_________ can impair a signal.
A)Attenuation
B)Distortion
C)Noise
D)All of the above
34
INCORRECT
The _________ product defines the number of bits that can fill the link.
A)bandwidth-period
B)frequency-amplitude
C)bandwidth-delay
D)delay-amplitude
Routing Information
Date: Fri Mar 28 13:05:16 EDT 2014
My name:
Section ID:
Email these results to:
Email address: Format:
Me: HTML
My Instructor: HTML
My TA: HTML
Other: HTML
E-Mail The Results
To learn more about the book this website supports, please visit its Information Center.
2007 McGraw-Hill Higher Education
Any use is subject to the Terms of Use and Privacy Notice.
McGraw-Hill Higher Education is one of the many fine businesses of The McGraw-Hill Companies.

You might also like