0% found this document useful (0 votes)
150 views

Inspection Pirate P V Insp Report Check List 2008 11 15

1) This is an inspection report for an unfired pressure vessel that includes external and internal visual inspection results. 2) The external inspection found the shell, welds, and supports to be in good condition with no notable issues. 3) The internal inspection found the trays, tubes, and piping to be in good condition as well, with no distortion or damage observed. 4) The inspector concluded the vessel is okay for continued service based on the inspection results.

Uploaded by

api-26988647
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
150 views

Inspection Pirate P V Insp Report Check List 2008 11 15

1) This is an inspection report for an unfired pressure vessel that includes external and internal visual inspection results. 2) The external inspection found the shell, welds, and supports to be in good condition with no notable issues. 3) The internal inspection found the trays, tubes, and piping to be in good condition as well, with no distortion or damage observed. 4) The inspector concluded the vessel is okay for continued service based on the inspection results.

Uploaded by

api-26988647
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Date:
Unfired Pressure Vessel Inspection
Report Page: 1
Vessel Information
Unit: Location: P&ID No.: Wo/Not.No:
Equipment No.: Equipment Name: :
Type:r Tower r Drum r Tubular Shell r Filter r Fin – Fan  Reactor  Other ______________
Orientation:rHorizontal rVertical rOn stm r Off stm NDE: r UT r PT r MT r RT r ET r VT r AE
Insulation:rYes rNo rPartially Thk:____ Type:_____ r API r ASME (R) r Plant Spec’s r NBIC
External Visual Inspection Results
Item Condition Comments
No. Item Good Fair Poor N/A (by item no.)
1 Shell
2 Heads, Chann. or Bonnets
3 Nozzles & Bolts, Flanges
4 Manways & Flange Bolts
5 Welds & Seams
6 Platforms & Handrails
7 Ladders & Cages
8 Stairway & Treads
9 Weatherproofing
10 Insulation
11 Coatings % of failure
12 Fireproofing
13 Supports & Foundation
14 Support Base Plate & Bolts
15 Davits
16 Sightglass & Level Gauges
17 Associated Piping
18 Jacket Mat. ___________
19 CUI Evaluation
20 UT Review
21 Expansion joint
22 Safety Valve Discharge RV #- Size Disch to
Lines
Yes No
23 Safety Valve Removed Date of Last Test Setting PSIG
24 RV Anti tamper seal Intact
25 Corrosion (L x W x S x D)
26 Ground Wire Attached
27 Name Plate Attached
28 Visible Leaks
29 Screwed Fittings
30 Visible Distortion
31 Weep Holes Okay
32 FE Leak Tags
33 Shell & Head magnetic?
34 Blistering
35 Photographs
36 Diamond Placard attached
37 OK for Continued Service

38 Nameplate data Nat Bd # Const. Date: Stamped r Yes r No


mawp@temp: S/N: Other:
39 Field operating parameters Temperature *F: Pressure psig Gauge Level: %
Inspector Information
Signature: Printed Name Attachments r Yes r No
Date:
Unfired Pressure Vessel Inspection
 Report Page: 2

Internal Visual Inspection Results


Item Condition Comments
No. Item Good Fair Poor N/A (by item no.)
40 Shell
41 Heads, Transitions
42 Trays
43 Tray Supports
44 Caps & Risers
45 Downcomers
46 Weirs & Seal Pans
47 Bolting, Bars, & Clips
48 Piping, Baffles, & Sprays
49 Manway & Flange Seats
50 Demister Pad
51 Tube Ends
52 Tube Sheet
53 Tube I.D.
54 Tube O.D.
55 Bonnet(s) & Channel(s)
56 Vortex Breaker
57 Gasket Surfaces
58 Nozzles (cond. and clear)
58 Liquid level &/or Boot
areas
60 Cleaness (How Cleaned?)
61 Associated Piping IDs
62 Supports
63 Distortion
64

65 Ok for continued Service? Yes No


65 Lining Type: % Lined:
66 Liner Damage % Damaged: Exposed Metal:
67 Hydro. Test Test Pressure PSIG Result
68 Corrosion Noted Location Depth Size
69 Errosion Depth: Size:
70 NDT Used Type: Outcome:
Defect Sketching Area

Service Information
Total Service (yrs): Interval: Ext: Int Next Inspection: Years

Signature: Date of Next Inspection:

You might also like