Scribd
Upload
94 views2 pages

BBQ130 - Detector Base CW Sounder and Strobe

This document provides information on the BBQ-130 Sounder/Strobe with base for use in interactive fire detection systems. It features automatic addressing, configurable sound patterns, and connects directly to the detection loop without additional wiring. The sounder/strobe unit provides synchronized sound outputs and flashing lights according to configuration by the fire detection panel. It is intended for indoor use and has approvals according to relevant EN fire safety standards.

Uploaded by

Dota Ng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
94 views2 pages

BBQ130 - Detector Base CW Sounder and Strobe

This document provides information on the BBQ-130 Sounder/Strobe with base for use in interactive fire detection systems. It features automatic addressing, configurable sound patterns, and connects directly to the detection loop without additional wiring. The sounder/strobe unit provides synchronized sound outputs and flashing lights according to configuration by the fire detection panel. It is intended for indoor use and has approvals according to relevant EN fire safety standards.

Uploaded by

Dota Ng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Sounder/Strobe w/base - BBQ-130

Interactive fire detection systems


Product datasheet
116-P-BBQ130/CGB, Rev. B, 2011-02-21 Protecting life, environment and property

Features

Sounder/strobe with base intended for indoor
use
Connects directly to the detection loop
- no extra wiring needed
Automatic addressing
Configurable sound pattern
High sound output
Used with interactive fire detection systems
High/low volume setting
Short circuit isolator in each unit

Application/Description
BBQ-130 is a combined detector base and
addressable sounder/strobe that is connected
directly to the detection loop. The standard version is
designed for indoor applications (degree of
protection lP22).

The sounders/strobes provides different advanced
sound patterns according to configuration.

All sounders/strobes within the same loop will have
synchronized sound outputs, so two sounders
located near each other will be perceived as one.

The maximum number of sounders/strobes on a
detection loop must be calculated according to the
limitation of the system in question.

The total height depends on the detector type.
Detector not included.







Dimensions








88
56
115
Sounder/Strobe w/base BBQ-130
AUTRONICA FIRE AND SECURITY AS
Head office, Trondheim, NO-7483 Norway Tel: +47 73 58 25 00, fax: +47 73 58 25 01, e-mail: [email protected]
Oil and Gas di vi sion, Stavanger, Norway Tel: +47 51 84 09 00, fax: +47 51 84 09 99
Maritime di vision, Spikkestad, Norway Tel: +47 31 29 55 00, fax: +47 31 29 55 01

Visit Autronica Fire and Security AS website: www.autronicafire.com



















Technical specifications
Appearance
Weight 237 g
Colour (main body) Transparent
Lens colour Transparent
Finish Polished
Material ABS FR / Polycarbonate
Installation
Total cable qty / type / size 4 x 0.5 to 2.5mm2 MICC
I.P. rating IP22
Detector lock to socket Yes
Operating conditions
Voltage range ( /s ) 17 - 25VDC
Current - Alarm total Strobe only: 4,56mA
Sounder LP: 2,15mA
Sounder HP: 4,3mA

Peak current (sounder +
strobe): 8,56mA
Current - Quiescent 260uA
Conventional / addressable Addressable
Temperature range -15 to +70 C
Humidity range Relative humidity 0% to 90%
non-condensing

Sound performance
Operational performance Ref. AFS doc. BB-212
SPL @ 1m Max=90dB(A) +/-3 (17-
25V)
Low volume setting Low Volume=80dB +/-3
Volume selection method Panel
Synchronisation Yes - Panel control
Tones list / details See configuration manual
for panel
Tone selection method Panel
Light performance
Flash power / light output 2 candela (spread around
360deg) @ 24V
Spatial distribution 360 degrees
Flash rate /s 1Hz
Synchronisation Yes - Panel control
Source / colour Red / LED
Address function
Address setting method Software
Approvals
EN 54-3/ EN 54-17
EC/CPD No. 0832-CPD-1046
MED-B-5292

Part number Description
116-BBQ-130 Sounder/Strobe w/base
116-BW-227 Dome cover for detector base
116-BW-240 Deep mount plate base

You might also like