A solar grid-tied inverter converts the DC

output of PV modules into AC power suitable

for transmission on the power grid, or use it
for your own consumption, often deploying
reactive power to meet new grid codes. It
must always optimize the power output via
MPPT (maximum power point tracking) and
additionally monitor both the system and
grid connection. In practice, each solar
inverter installed in solar power plants needs
to connect an array or string of PV modules to
the power grid. e more ecient the
inverter, the better the LCOE (levelised Cost
of Electricity) generated by the system.
An on-grid solar inverter is composed of a DC-
DC module, a DC-AC module and a control
module. DC-DC module is built with a
MOSFET, an inductor and a transformer, and
functions to provide a stable DC output
through rectifying and ltering the unstable
DC power produced by PV modules; DC-AC
module includes an IGBT array and an output
lter circuit to convert the DC output of DC-
DC module into an AC output suited for
transmission on power grid. Control module
is the core of whole system. It has a DSC, a
voltage sensor, a current sensor, and a driver
that drives MOSFET and IGBT module. DSC
calculates the maximum power point of PV
module array based on signals collected by
sensors including PV modules voltage and
current, power grids voltage and current, as
well as phase. And accordingly it sends out
instructions to driver which drives DC-DC and
DC-AC modules. Furthermore, DSC is able to
nd out abnormal conditions such as
transmission failure of power grid and take
measures such as cutting o the connection
between inverters and grid to prevent island
eect occur ences on power gr i d.
Additionally, the control module has an
interface for external display showing PV
modules status and input/output voltage
and current, and integrates a RS232/RS485
communication interface to connect with
control centers of solar power plants, so that
real-time monitoring of solar panels and
inverters can be implemented.
How does it work?
PV Grid Connected Inverters operate at a
lower, safer voltage from the PV array, while
havi ng the advantages of rel i abi l i ty,
exibility and improved energy yield. Using
lower voltages on the PV side means there
are lower voltages in your roof eliminating
high voltage hazards and giving peace of
mind to installers and service personnel.
By using short multiple strings of panels, PV
Grid Connected Inverters make sure that
there are more paths for electricity to ow,
which ensures minimal power loss due to
varying environmental or panel conditions.

ON GRID/GRID TIE SOLUTIONS
8
ON GRID/GRID TIE SOLUTIONS
1800W p, 2400W p, 3300Wp
4600W p, 5500Wp
12000W p
50KWp, 100KWp, 250KWp, 500KWp, 1000KWp
9
String Inverter - Single Phase
Central Inverter - Three Phase
Range - String Inverter - Single Phase: 1800 Wp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric
(photovoltaic) power into utility-grade electricity that can be utilized by the
home or sold to the local power company.Advanced state of art electronics
embedded inside the inverter ensures that maximum PV power is converted to
AC and delivered to the Utility Grid .These inverters are configured to feed into
the LT(Low Voltage) utility network and have inbuilt safety anti islanding
feature to ensure that the inverter switches off when grid is absent . In order to
operate, the Solar Grid Tie Inverter must have grid power available and
connected. A wide input voltage range gives the flexibility to the designer to
use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and
connecting the DC input to a PV array and the AC output to the utility
Feature
High Total Efficiency High reliability and efficiency with low
auxiliary consumption for rapid return on investment. MPP
efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65
AC Short-circuit Protection
Applications
Educational Institutes Residential
Small & Medium commercial Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
PV module
RS485
Internet
Switch
Router
TCP/IP TCP/IP
Network cable
N
e
t
w
o
r
k

c
a
b
le
W
-
L
A
N
10
Grid Tie Inverter
String Inverter - Single Phase
Power routed to Loads
GRID TIE
INVERTER
SOLAR PANEL
MAIN UTILITY
SERVICE PANEL
UTILITY
METER
UTILITY GRID
Surplus power routed to utility grid
DC to AC
Harvested
Solar
Energy
GRID
INTERACTIVE
INVERTER
SRS 2K
R
11
Grid Tie Inverter
String Inverter - Single Phase
SRS - 2K

1800 W
500 Vdc
150V - 450V
11 A
1
-

1650 W
1500 W
184 to 264 V
9 A
220/230/240 Vac
6.8 A
50/60 Hz (+-5Hz)
1
< 3%
Single Phase
Active & Passive
No galvanic isolation, transformerless

96%
95%
99.90%

< 5 W
< 0.2 W

IP 65
-20 to +60 Celsius
0 to 95%
<=2000 m
Natural cooling

4-line character display
RS232/RS485/WLAN & Ethernet (selectable)
Through plug-in GPRS module and viewable remotely through web portal

Yes
Yes
Yes

ISO 9001 certified
EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
VDE0126-1-1, VDE AR N4105, EN50178, IEC62109, DK5940/ENEL Guideline 2011/CEI0-21,
G83/59/EEG2012, AS3100/4777 etc.
Type Code
Input (DC) Parameters
Maximum DC input power
Maximum DC input voltage
MPPT operating voltage range
Maximum input current (per MPP tracker)
Number of input
No. of MPPT tracker
Output (AC) Parameters
Maximum AC output power
Rated AC output power
Output voltage range
Maximum output current
Rated ouput voltage
Rated output current
Output frequency range
Power factor
Current Harmonic Distortion (THDi)
AC connection
Islanding protection detectiom
Isolation Principle
Efficiency
Maximum
Euro-eta
MPPT Efficiency
Power Consumption
Standby consumption
Night consumption
Environmental limits
Degree of protection
Ambient temperature range
Relative humidity, not condensing
Maximum altitude (above sea level)
Ventilation
Communication
Liquid Crystal Display (LCD)
Communication interface
Remote Monitoring
Protection
Ground fault monitoring
Grid monitoring with anti-islanding
All-pole fault current monitoring unit
Product Compliance
Quality Assurance
EMC standard
Safety
TECHNICAL SPECIFICATIONS
PV module
RS485
Internet
Switch
Router
TCP/IP TCP/IP
Network cable
N
e
t
w
o
r
k

c
a
b
le
W
-
L
A
N
12
Grid Tie Inverter
String Inverter - Single Phase
Range - String Inverter - Single Phase: 2400 Wp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric
(photovoltaic) power into utility-grade electricity that can be utilized by the
home or sold to the local power company.Advanced state of art electronics
embedded inside the inverter ensures that maximum PV power is converted to
AC and delivered to the Utility Grid .These inverters are configured to feed into
the LT(Low Voltage) utility network and have inbuilt safety anti islanding
feature to ensure that the inverter switches off when grid is absent . In order to
operate, the Solar Grid Tie Inverter must have grid power available and
connected. A wide input voltage range gives the flexibility to the designer to
use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and
connecting the DC input to a PV array and the AC output to the utility
Feature
High Total Efficiency High reliability and efficiency with low
auxiliary consumption for rapid return on investment. MPP
efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65
AC Short-circuit Protection
Applications
Educational Institutes Residential
Small & Medium commercial Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
Power routed to Loads
GRID TIE
INVERTER
SOLAR PANEL
MAIN UTILITY
SERVICE PANEL
UTILITY
METER
UTILITY GRID
Surplus power routed to utility grid
DC to AC
Harvested
Solar
Energy
GRID
INTERACTIVE
INVERTER
SRS 2K
R
13
Grid Tie Inverter
SRS - 2K

2400 W
500 Vdc
150V - 450V
13 A
1
1

2200 W
2000 W
184 to 264 V
11 A
220/230/240 Vac
9.1 A
50/60 Hz (+-5Hz)
1
< 3%
Single Phase
Active & Passive
No galvanic isolation, transformerless

96%
95%
99.90%

< 5 W
< 0.2 W

IP 65
-20 to +60 Celsius
0 to 95%
<=2000 m
Natural cooling

4-line character display
RS232/RS485/WLAN & Ethernet (selectable)
Through plug-in GPRS module and viewable remotely through web portal

Yes
Yes
Yes

ISO 9001 certified
EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
VDE0126-1-1, VDE AR N4105, EN50178, IEC62109, DK5940/ENEL Guideline 2011/CEI0-21,
G83/59/EEG2012, AS3100/4777 etc.
String Inverter - Single Phase
Type Code
Input (DC) Parameters
Maximum DC input power
Maximum DC input voltage
MPPT operating voltage range
Maximum input current (per MPP tracker)
Number of input
No. of MPPT tracker
Output (AC) Parameters
Maximum AC output power
Rated AC output power
Output voltage range
Maximum output current
Rated ouput voltage
Rated output current
Output frequency range
Power factor
Current Harmonic Distortion (THDi)
AC connection
Islanding protection detectiom
Isolation Principle
Efficiency
Maximum
Euro-eta
MPPT Efficiency
Power Consumption
Standby consumption
Night consumption
Environmental limits
Degree of protection
Ambient temperature range
Relative humidity, not condensing
Maximum altitude (above sea level)
Ventilation
Communication
Liquid Crystal Display (LCD)
Communication interface
Remote Monitoring
Protection
Ground fault monitoring
Grid monitoring with anti-islanding
All-pole fault current monitoring unit
Product Compliance
Quality Assurance
EMC standard
Safety
TECHNICAL SPECIFICATIONS
PV module
RS485
Internet
Switch
Router
TCP/IP TCP/IP
Network cable
N
e
t
w
o
r
k

c
a
b
le
W
-
L
A
N
14
Grid Tie Inverter
String Inverter - Single Phase
Range - String Inverter - Single Phase: 3300 Wp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric
(photovoltaic) power into utility-grade electricity that can be utilized by the
home or sold to the local power company.Advanced state of art electronics
embedded inside the inverter ensures that maximum PV power is converted to
AC and delivered to the Utility Grid .These inverters are configured to feed into
the LT(Low Voltage) utility network and have inbuilt safety anti islanding
feature to ensure that the inverter switches off when grid is absent . In order to
operate, the Solar Grid Tie Inverter must have grid power available and
connected. A wide input voltage range gives the flexibility to the designer to
use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and
connecting the DC input to a PV array and the AC output to the utility
Feature
High Total Efficiency High reliability and efficiency with low
auxiliary consumption for rapid return on investment. MPP
efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65
AC Short-circuit Protection
Applications
Educational Institutes Residential
Small & Medium commercial Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
Power routed to Loads
GRID TIE
INVERTER
SOLAR PANEL
MAIN UTILITY
SERVICE PANEL
UTILITY
METER
UTILITY GRID
Surplus power routed to utility grid
DC to AC
Harvested
Solar
Energy
GRID
INTERACTIVE
INVERTER
SRS 3K
R
15
Grid Tie Inverter
SRS - 3K

3300 W
500 Vdc
150V - 450V
19 A
2
1

3100 W
3000 W
184 to 264 V
15 A
220/230/240 Vac
13.6 A
50/60 Hz (+-5Hz)
1
< 3%
Single Phase
Active & Passive
No galvanic isolation, transformerless

97.50%
96.50%
99.90%

< 5 W
< 0.2 W

IP 65
-20 to +60 Celsius
0 to 95%
<=2000 m
Natural cooling

4-line character display
RS232/RS485/WLAN & Ethernet (selectable)
Through plug-in GPRS module and viewable remotely through web portal

Yes
Yes
Yes

ISO 9001 certified
EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
VDE0126-1-1, VDE AR N4105, EN50178, IEC62109, DK5940/ENEL Guideline 2011/CEI0-21,
G83/59/EEG2012, AS3100/4777 etc.
String Inverter - Single Phase
Type Code
Input (DC) Parameters
Maximum DC input power
Maximum DC input voltage
MPPT operating voltage range
Maximum input current (per MPP tracker)
Number of input
No. of MPPT tracker
Output (AC) Parameters
Maximum AC output power
Rated AC output power
Output voltage range
Maximum output current
Rated ouput voltage
Rated output current
Output frequency range
Power factor
Current Harmonic Distortion (THDi)
AC connection
Islanding protection detectiom
Isolation Principle
Efficiency
Maximum
Euro-eta
MPPT Efficiency
Power Consumption
Standby consumption
Night consumption
Environmental limits
Degree of protection
Ambient temperature range
Relative humidity, not condensing
Maximum altitude (above sea level)
Ventilation
Communication
Liquid Crystal Display (LCD)
Communication interface
Remote Monitoring
Protection
Ground fault monitoring
Grid monitoring with anti-islanding
All-pole fault current monitoring unit
Product Compliance
Quality Assurance
EMC standard
Safety
TECHNICAL SPECIFICATIONS
16
Grid Tie Inverter
String Inverter - Single Phase
Range - String Inverter - Single Phase: 4600 Wp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric
(photovoltaic) power into utility-grade electricity that can be utilized by the
home or sold to the local power company.Advanced state of art electronics
embedded inside the inverter ensures that maximum PV power is converted to
AC and delivered to the Utility Grid .These inverters are configured to feed into
the LT(Low Voltage) utility network and have inbuilt safety anti islanding
feature to ensure that the inverter switches off when grid is absent . In order to
operate, the Solar Grid Tie Inverter must have grid power available and
connected. A wide input voltage range gives the flexibility to the designer to
use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and
connecting the DC input to a PV array and the AC output to the utility
Feature
High Total Efficiency High reliability and efficiency with low
auxiliary consumption for rapid return on investment. MPP
efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65
AC Short-circuit Protection
Applications
Educational Institutes Residential
Small & Medium commercial Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
Power routed to Loads
GRID TIE
INVERTER
SOLAR PANEL
MAIN UTILITY
SERVICE PANEL
UTILITY
METER
UTILITY GRID
Surplus power routed to utility grid
DC to AC
Harvested
Solar
Energy
INSTALLATION DIAGRAM
GRID
INTERACTIVE
INVERTER
SRS 4.2K
R
17
Grid Tie Inverter
SRS - 4.2K

4600 W
600 Vdc
150V - 500V
13A X 2
2
2

4300 W
4200W
184 to 276 V
21 A
230 Vac
18.3 A
50/60 Hz (+-5Hz)
0.9 leading - 0.9 lagging
< 3%
Single Phase
Active & Passive
No galvanic isolation, transformerless

>97.5%
>96.8%
99.90%

< 7 W
< 0.2 W

IP 65
-20 to +60 Celsius
0 to 95%
2000 m
Natural cooling


RS485 standard, external WiFi or Ethernet device optional
Through plug-in GPRS module and viewable remotely through web portal
Yes
Yes
Yes

ISO 9001 certified
EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4, EN55022, EN61000-3-2, EN61000-
3-12, EN61000-3-3, EN61000-3-11
VDE0126-1-1, VDE AR N4105, EN50178, IEC62109, DK5940/ENEL Guideline 2011/CEI0-21,
G83/59/EEG2012, AS3100/4777 etc.
String Inverter - Single Phase
Type Code
Input (DC) Parameters
Maximum DC input power
Maximum DC input voltage
MPPT operating voltage range
Maximum input current (per MPP tracker)
Number of input
No. of MPPT tracker
Output (AC) Parameters
Maximum AC output power
Rated AC output power
Output voltage range
Maximum output current
Rated ouput voltage
Rated output current
Output frequency range
Power factor
Current Harmonic Distortion (THDi)
AC connection
Islanding protection detectiom
Isolation Principle
Efficiency
Maximum
Euro-eta
MPPT Efficiency
Power Consumption
Standby consumption
Night consumption
Environmental limits
Degree of protection
Ambient temperature range
Relative humidity, not condensing
Maximum altitude (above sea level)
Ventilation
Communication
Liquid Crystal Display (LCD)
Communication interface
Remote Monitoring
Protection
Ground fault monitoring
Grid monitoring with anti-islanding
All-pole fault current monitoring unit
Product Compliance
Quality Assurance
EMC standard
Safety
TECHNICAL SPECIFICATIONS
INSTALLATION DIAGRAM
18
Grid Tie Inverter
String Inverter - Single Phase
Range - String Inverter - Single Phase: 5500 Wp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric
(photovoltaic) power into utility-grade electricity that can be utilized by the
home or sold to the local power company.Advanced state of art electronics
embedded inside the inverter ensures that maximum PV power is converted to
AC and delivered to the Utility Grid .These inverters are configured to feed into
the LT(Low Voltage) utility network and have inbuilt safety anti islanding
feature to ensure that the inverter switches off when grid is absent . In order to
operate, the Solar Grid Tie Inverter must have grid power available and
connected. A wide input voltage range gives the flexibility to the designer to
use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and
connecting the DC input to a PV array and the AC output to the utility
Feature
High Total Efficiency High reliability and efficiency with low
auxiliary consumption for rapid return on investment. MPP
efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65
AC Short-circuit Protection
Applications
Educational Institutes Residential
Small & Medium commercial Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
Power routed to Loads
GRID TIE
INVERTER
SOLAR PANEL
MAIN UTILITY
SERVICE PANEL
UTILITY
METER
UTILITY GRID
Surplus power routed to utility grid
DC to AC
Harvested
Solar
Energy
GRID
INTERACTIVE
INVERTER
SRS 5K
R
TECHNICAL SPECIFICATIONS
19
Grid Tie Inverter
SRS - 5K

5500 W
600 Vdc
150V - 500V
15A X 2
2
2

5100 W
5000W
184 to 276 V
24 A
230 Vac
21.7 A
50/60 Hz (+-5Hz)
0.9 leading - 0.9 lagging
< 3%
Single Phase
Active & Passive
No galvanic isolation, transformerless

>97.6%
>96.8%
99.90%

< 7 W
< 0.2 W

IP 65
-20 to +60 Celsius
0 to 95%
2000 m
Natural cooling


RS485 standard, external WiFi or Ethernet device optional
Through plug-in GPRS module and viewable remotely through web portal
Yes
Yes
Yes

ISO 9001 certified
EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4, EN55022, EN61000-3-2, EN61000-
3-12, EN61000-3-3, EN61000-3-11
VDE0126-1-1, VDE AR N4105, EN50178, IEC62109, DK5940/ENEL Guideline 2011/CEI0-21,
G83/59/EEG2012, AS3100/4777 etc.
String Inverter - Single Phase
Type Code
Input (DC) Parameters
Maximum DC input power
Maximum DC input voltage
MPPT operating voltage range
Maximum input current (per MPP tracker)
Number of input
No. of MPPT tracker
Output (AC) Parameters
Maximum AC output power
Rated AC output power
Output voltage range
Maximum output current
Rated ouput voltage
Rated output current
Output frequency range
Power factor
Current Harmonic Distortion (THDi)
AC connection
Islanding protection detectiom
Isolation Principle
Efficiency
Maximum
Euro-eta
MPPT Efficiency
Power Consumption
Standby consumption
Night consumption
Environmental limits
Degree of protection
Ambient temperature range
Relative humidity, not condensing
Maximum altitude (above sea level)
Ventilation
Communication
Liquid Crystal Display (LCD)
Communication interface
Remote Monitoring
Protection
Ground fault monitoring
Grid monitoring with anti-islanding
All-pole fault current monitoring unit
Product Compliance
Quality Assurance
EMC standard
Safety
20
INSTALLATION DIAGRAM
Grid Tie Inverter
String Inverter - Single Phase
Range - String Inverter - Single Phase: 12000 Wp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric
(photovoltaic) power into utility-grade electricity that can be utilized by the
home or sold to the local power company.Advanced state of art electronics
embedded inside the inverter ensures that maximum PV power is converted to
AC and delivered to the Utility Grid .These inverters are configured to feed into
the LT(Low Voltage) utility network and have inbuilt safety anti islanding
feature to ensure that the inverter switches off when grid is absent . In order to
operate, the Solar Grid Tie Inverter must have grid power available and
connected. A wide input voltage range gives the flexibility to the designer to
use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and
connecting the DC input to a PV array and the AC output to the utility
Feature
High Total Efficiency High reliability and efficiency with low
auxiliary consumption for rapid return on investment. MPP
efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65
AC Short-circuit Protection
Applications
Educational Institutes Residential
Small & Medium commercial Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
Power routed to Loads
GRID TIE
INVERTER
SOLAR PANEL
MAIN UTILITY
SERVICE PANEL
UTILITY
METER
UTILITY GRID
Surplus power routed to utility grid
DC to AC
Harvested
Solar
Energy
GRID
INTERACTIVE
INVERTER
SRS 10K
R
TECHNICAL SPECIFICATIONS
21
Grid Tie Inverter
SRS - 10K

12000 W
900 Vdc
250V - 850V
12A X 3
3
3

10500 W
10000 W
400Vac +/-20% (adjustable)
17 A
400 Vac
15.2 A
50/60 Hz (+-5Hz)
0.9 leading - 0.9 lagging
< 3%
Three phase
Active & Passive
No galvanic isolation, transformerless

98.10%
96.90%
99.90%

< 10 W
< 2 W

IP 65
-20 to +60 Celsius
0 to 95%
2000 m
Wind cooling

4 Lines of LCD, 4 Keys, 4 LEDs
RS485 standard, external WiFi or Ethernet device optional
Through plug-in GPRS module and viewable remotely through web portal
Yes
Yes
Yes

ISO 9001 certified
EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
VDE0126-1-1, VDE AR N4105, EN50178, IEC62109, DK5940/ENEL Guideline 2011/CEI0-21,
G83/59/EEG2012, AS3100/4777 etc.
String Inverter - Single Phase
Type Code
Input (DC) Parameters
Maximum DC input power
Maximum DC input voltage
MPPT operating voltage range
Maximum input current (per MPP tracker)
Number of input
No. of MPPT tracker
Output (AC) Parameters
Maximum AC output power
Rated AC output power
Output voltage range
Maximum output current
Rated ouput voltage
Rated output current
Output frequency range
Power factor
Current Harmonic Distortion (THDi)
AC connection
Islanding protection detectiom
Isolation Principle
Efficiency
Maximum
Euro-eta
MPPT Efficiency
Power Consumption
Standby consumption
Night consumption
Environmental limits
Degree of protection
Ambient temperature range
Relative humidity, not condensing
Maximum altitude (above sea level)
Ventilation
Communication
Liquid Crystal Display (LCD)
Communication interface
Remote Monitoring
Protection
Ground fault monitoring
Grid monitoring with anti-islanding
All-pole fault current monitoring unit
Product Compliance
Quality Assurance
EMC standard
Safety
PV Monitoring kit for Grid Tie Inverters
Su-kam Monitoring kit is not only a simple solution provider for PV
monitoring, but also serves as a platform to connect end-users,
installers/integrators and device manufacturers.
Inverter WiFi/GPRS kit
By collecting information from inverters including status and
performance, data loggers make the long-term monitoring of PV
systems feasible and efficient. With the easiest and most cost-
effective functions, So COMMUNICATIONInverter Kit enables users
to achieve great increase in ROI with only a little investment.
A variety of communication methods available, including
Ethernet, WiFi, GPRS.
Can be connected to up to 64 inverters
Quick installation and easy operation with "Plug & Play" function
Additional accessories such as electric meter, irradiation sensor
and temperature sensor, etc. can be connected
Storage of over 25 years
Remote monitoring via Su-kam/Customer Portal
Web Server included, enabling offline access
PV MONITORING KIT
End Users
Monitor PV systems anytime and anywhere
Evaluate ROI of PV systems
Immediate detection of malfuncations and defects
Easy communication with installers
Easier to get financial support
Share energy-saving concepts with others
Installers/Integrators
Remote management of PV systems
Minimize O&M costs
Quicker resolution of malfunctions
Improve customer services
Enhance competitive advantages of services
Easy understanding of device performance
Increase project experience
Presentation of successful case studies
Manufactures
Remote montioring of devices
Minimize O&M and service costs
Obtain performance data of devices
Enhance competitive advantages
Understand market distribution of devices
The best display platform for devices
Su-kam Monitoring kit aims to make an ecosystem for win-win cooperation, and to create value for various levels in the industrial
chain, including end users, installers, distributors and device manufacturers, etc.
22
Grid Tie Inverter
Connection with Multiple Inverters Connection with Single Inverter
String Inverter - Single Phase
Range - Central Inverter - Three Phase: 50KWp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric (photovoltaic) power into utility-grade electricity that can be
utilized by the home or sold to the local power company.Advanced state of art electronics embedded inside the inverter ensures that
maximum PV power is converted to AC and delivered to the Utility Grid .These inverters are configured to feed into the LT(Low
Voltage) utility network and have inbuilt safety anti islanding feature to ensure that the inverter switches off when grid is absent . In
order to operate, the Solar Grid Tie Inverter must have grid power available and connected. A wide input voltage range gives the
flexibility to the designer to use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and connecting the DC input to a PV array and the AC output to
the utility
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Su-kam Radiant Inverter Competing Brand Inverter
23
Grid Tie Inverter
Central Inverter - Three Phase
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65 AC Short-circuit Protection
Applications
Educational Institutes
Residential
Small & Medium commercial
Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
Feature
High Total Efficiency High reliability and efficiency with
low auxiliary consumption for rapid return on investment.
MPP efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
24
Grid Tie Inverter
Central Inverter - Three Phase
98%
96%
94%
92%
90%
88%
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Conversion
efficiency
Output Power
Rating Power
HIGH EFFICIENCY EVEN UNDER PART LOAD CONDITIONS
25
Grid Tie Inverter
TECHNICAL SPECIFICATIONS
Max DC Voltage
Max DC Power
Max Inpaut
MMPT Range
Max DC input current
PV Array Configuration
Transformer
Rated Output Power
Rated Voltage
Voltage range
Grid Frequency
Grid Frequency Range
THDi
Pf
Maximum output
Current per Phase
Max Efficiency
Europian Eff
Losses At night
Stanby Consumption
Ambient Temperature
Storage Temp. Range
Relative Humidity
Cooling Method
Display
Communicaton
Ambient Sensor
MPPT Accuracy
Dimension (WXHXD)
Weight (KG)
Max Altitude Above See level
Noise
Input (DC side)
Grid (AC side)
Faults Displayed
on Display
56 KWp
130A
50 KW
96.8%
96.2%
<20W
900x2000x
800 mm
650
50 KWp
2
420V-850V
Floating Negative Ground Positive Ground
Available
400V
310V-450V
50Hz
47-53Hz
<.8%
>.99
145( need to confirm)
<100W
-25 to 55O C without de-rating
-25 to 80O C (Need to Confirm)
95% no condensation
Air
LCD
Ethernet/RS232/RS485
Temperature / Sunlight / Wind Speed
99.9%
3000m
<65 dB(A)
Over voltage and under voltage
Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
880V DC with Crystalline silicon /720V DC with thin film
Array Fail, AC /DC Earth Fault, No Sync, Frequency Out of Range, Inverter Over Current
Central Inverter - Three Phase
Range - Central Inverter - Three Phase: 100KWp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric (photovoltaic) power into utility-grade electricity that can be
utilized by the home or sold to the local power company.Advanced state of art electronics embedded inside the inverter ensures that
maximum PV power is converted to AC and delivered to the Utility Grid .These inverters are configured to feed into the LT(Low
Voltage) utility network and have inbuilt safety anti islanding feature to ensure that the inverter switches off when grid is absent . In
order to operate, the Solar Grid Tie Inverter must have grid power available and connected. A wide input voltage range gives the
flexibility to the designer to use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and connecting the DC input to a PV array and the AC output to
the utility
Su-kam Radiant Inverter Competing Brand Inverter
26
Grid Tie Inverter
Central Inverter - Three Phase
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65 AC Short-circuit Protection
Applications
Educational Institutes
Residential
Small & Medium commercial
Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
98%
96%
94%
92%
90%
88%
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Conversion
efficiency
Output Power
Rating Power
HIGH EFFICIENCY EVEN UNDER PART LOAD CONDITIONS
Feature
High Total Efficiency High reliability and efficiency with
low auxiliary consumption for rapid return on investment.
MPP efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
27
Grid Tie Inverter
Central Inverter - Three Phase
28
Grid Tie Inverter
TECHNICAL SPECIFICATIONS
Max DC Voltage
Max DC Power
Max Inpaut
MMPT Range
Max DC input current
PV Array Configuration
Transformer
Rated Output Power
Rated Voltage
Voltage range
Grid Frequency
Grid Frequency Range
THDi
Pf
Maximum output
Current per Phase
Max Efficiency
Europian Eff
Losses At night
Stanby Consumption
Ambient Temperature
Storage Temp. Range
Relative Humidity
Cooling Method
Display
Communicaton
Ambient Sensor
MPPT Accuracy
Dimension (WXHXD)
Weight (KG)
Max Altitude Above See level
Noise
Input (DC side)
Grid (AC side)
Faults Displayed
on Display
100 KWp
112 KWp
4
250A
100 KW
97.2%
96.6%
<40W
1200/2200
800 mm
980
420V-850V
Floating Negative Ground Positive Ground
Available
400V
310V-450V
50Hz
47-53Hz
<.8%
>.99
145( need to confirm)
<100W
-25 to 55O C without de-rating
-25 to 80O C (Need to Confirm)
95% no condensation
Air
LCD
Ethernet/RS232/RS485
Temperature / Sunlight / Wind Speed
99.9%
3000m
<65 dB(A)
Over voltage and under voltage
Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
880V DC with Crystalline silicon /720V DC with thin film
Inverter Over Temp., DC Over Volt., Fast DC over Volt., Array over Volt., DC under Volt., Local Emergency Stop (optional)
Central Inverter - Three Phase
Range - Central Inverter - Three Phase: 250KWp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric (photovoltaic) power into utility-grade electricity that can be
utilized by the home or sold to the local power company.Advanced state of art electronics embedded inside the inverter ensures that
maximum PV power is converted to AC and delivered to the Utility Grid .These inverters are configured to feed into the LT(Low
Voltage) utility network and have inbuilt safety anti islanding feature to ensure that the inverter switches off when grid is absent . In
order to operate, the Solar Grid Tie Inverter must have grid power available and connected. A wide input voltage range gives the
flexibility to the designer to use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and connecting the DC input to a PV array and the AC output to
the utility
Su-kam Radiant Inverter Competing Brand Inverter
29
Grid Tie Inverter
Central Inverter - Three Phase
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65 AC Short-circuit Protection
Applications
Educational Institutes
Residential
Small & Medium commercial
Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
Feature
High Total Efficiency High reliability and efficiency with
low auxiliary consumption for rapid return on investment.
MPP efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
30
Grid Tie Inverter
Central Inverter - Three Phase
98%
96%
94%
92%
90%
88%
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Conversion
efficiency
Output Power
Rating Power
HIGH EFFICIENCY EVEN UNDER PART LOAD CONDITIONS
31
Grid Tie Inverter
TECHNICAL SPECIFICATIONS
Max DC Voltage
Max DC Power
Max Inpaut
MMPT Range
Max DC input current
PV Array Configuration
Transformer
Rated Output Power
Rated Voltage
Voltage range
Grid Frequency
Grid Frequency Range
THDi
Pf
Maximum output
Current per Phase
Max Efficiency
Europian Eff
Losses At night
Stanby Consumption
Ambient Temperature
Storage Temp. Range
Relative Humidity
Cooling Method
Display
Communicaton
Ambient Sensor
MPPT Accuracy
Dimension (WXHXD)
Weight (KG)
Max Altitude Above See level
Noise
Input (DC side)
Grid (AC side)
Faults Displayed
on Display
275 KWp
8
600 A
250KW
97.5%
96.7%
99.9%
1800/2200/
800mm
1960
Inverter Over Temp., DC Over Volt., Fast DC over Volt., Array over Volt., DC under Volt., Local Emergency Stop (optional)
250 KWP
<40W
420V-850V
Floating Negative Ground Positive Ground
Available
400V
310V-450V
50Hz
47-53Hz
<.8%
>.99
145( need to confirm)
<100W
-25 to 55O C without de-rating
-25 to 80O C (Need to Confirm)
95% no condensation
Air
LCD
Ethernet/RS232/RS485
Temperature / Sunlight / Wind Speed
3000m
<65 dB(A)
Over voltage and under voltage
Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
880V DC with Crystalline silicon /720V DC with thin film
Central Inverter - Three Phase
Range - Central Inverter - Three Phase: 500KWp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric (photovoltaic) power into utility-grade electricity that can be
utilized by the home or sold to the local power company.Advanced state of art electronics embedded inside the inverter ensures that
maximum PV power is converted to AC and delivered to the Utility Grid .These inverters are configured to feed into the LT(Low
Voltage) utility network and have inbuilt safety anti islanding feature to ensure that the inverter switches off when grid is absent . In
order to operate, the Solar Grid Tie Inverter must have grid power available and connected. A wide input voltage range gives the
flexibility to the designer to use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and connecting the DC input to a PV array and the AC output to
the utility
Su-kam Radiant Inverter Competing Brand Inverter
32
Grid Tie Inverter
Central Inverter - Three Phase
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65 AC Short-circuit Protection
Applications
Educational Institutes
Residential
Small & Medium commercial
Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
Feature
High Total Efficiency High reliability and efficiency with
low auxiliary consumption for rapid return on investment.
MPP efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
33
Grid Tie Inverter
Central Inverter - Three Phase
98%
96%
94%
92%
90%
88%
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Conversion
efficiency
Output Power
Rating Power
HIGH EFFICIENCY EVEN UNDER PART LOAD CONDITIONS
34
Grid Tie Inverter
TECHNICAL SPECIFICATIONS
Max DC Voltage
Max DC Power
Max Inpaut
MMPT Range
Max DC input current
PV Array Configuration
Transformer
Rated Output Power
Rated Voltage
Voltage range
Grid Frequency
Grid Frequency Range
THDi
Pf
Maximum output
Current per Phase
Max Efficiency
Europian Eff
Losses At night
Stanby Consumption
Ambient Temperature
Storage Temp. Range
Relative Humidity
Cooling Method
Display
Communicaton
Ambient Sensor
MPPT Accuracy
Dimension (WXHXD)
Weight (KG)
Max Altitude Above See level
Noise
Input (DC side)
Grid (AC side)
Faults Displayed
on Display
560 KWP
16
1200A
NA
500 KW
270 V
210 -310V
98.7%
98.5%
<100W
<150W
2800/2200/
800mm
1960
Wrong Phase, Grid abnormal, Output overload, Wound component, Array reverse polarity (optional), Array fuse fail(optional)
500 KWp TL
99.9%
420V-850V
Floating Negative Ground Positive Ground
50Hz
47-53Hz
<.8%
>.99
145( need to confirm)
-25 to 55O C without de-rating
-25 to 80O C (Need to Confirm)
95% no condensation
Air
LCD
Ethernet/RS232/RS485
Temperature / Sunlight / Wind Speed
3000m
<65 dB(A)
Over voltage and under voltage
Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
880V DC with Crystalline silicon /720V DC with thin film
Central Inverter - Three Phase
Range - Central Inverter - Three Phase: 1000KWp
Su-Kam Grid Tie Solar Inverter is designed to convert solar electric (photovoltaic) power into utility-grade electricity that can be
utilized by the home or sold to the local power company.Advanced state of art electronics embedded inside the inverter ensures that
maximum PV power is converted to AC and delivered to the Utility Grid .These inverters are configured to feed into the LT(Low
Voltage) utility network and have inbuilt safety anti islanding feature to ensure that the inverter switches off when grid is absent . In
order to operate, the Solar Grid Tie Inverter must have grid power available and connected. A wide input voltage range gives the
flexibility to the designer to use a large range of PV modules.
Working Principle
Installing the Grid Tie Solar Inverter consists of mounting it to the wall and connecting the DC input to a PV array and the AC output to
the utility
Su-kam Radiant Inverter Competing Brand Inverter
35
Grid Tie Inverter
Central Inverter - Three Phase
Comparison of Total Harmonic Distortion between Radiant and a competing brand at 10% load
Communication Interface & Monitoring Software
Versatile communication interface Standard RS485, Rs232
Monitoring Software Provides operational status and
electricity generated data.
Display
Liquid crystal display (LCD) providing easy-to-read system
status and daily cumulative energy production information.
Protections
Anti Islanding
DC reverse polarity protection
All-pole fault current monitoring unit
Ground fault monitoring
Environmental Protection Ip65 AC Short-circuit Protection
Applications
Educational Institutes
Residential
Small & Medium commercial
Hospitals
Hotels
Certifications
EMC standard - EN61000-6-1, EN61000-6-2, EN61000-6-3,
EN61000-6-4, EN55022, EN61000-3-2, EN61000-3-12,
EN61000-3-3, EN61000-3-11
Safety - VDE0126-1-1, VDE AR N4105, EN50178, IEC62109,
DK5940/ENEL
Feature
High Total Efficiency High reliability and efficiency with
low auxiliary consumption for rapid return on investment.
MPP efficiency > 99.9% ; Maximum efficiency >97.5%
PV compatibility Su-Kam Grid Tie inverter is designed to
take advantage of solar modules configured as high voltage
PV string arrays with an input voltage Maximum Power
Point Range of 150 to 550 Vdc.
Maximum Power Point Tracking (MPPT) Su-Kam Grid Tie
inverters use Maximum Power point Technology (MPPT) to
harvest the maximum amount of energy from the solar
array. Provide single and double MPP trackers for different
application demands.
Expandable Multiple grid tie inverters may be networked
together for increased net metering capacity or future
system growth. Parallel up to 50 units via RS485 port.
Advanced grid support functionality Extensive grid code
compatibility and adjustability.
Proven technology platform High reliability and long
operating life for secured return on investment.
Compact state of the art design Transformer less design.
Low space requirement, with fast and easy installation and
serviceability for reduced overall cost.
Life cycle service & support Rapid support anywhere
through Su-Kam's extensive service network.
Robust enclosure, with IP65 rating Suitable for outdoor
installation
36
Grid Tie Inverter
Central Inverter - Three Phase
98%
96%
94%
92%
90%
88%
86%
84%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Conversion
efficiency
Output Power
Rating Power
HIGH EFFICIENCY EVEN UNDER PART LOAD CONDITIONS
37
Grid Tie Inverter
TECHNICAL SPECIFICATIONS
Max DC Voltage
Max DC Power
Max Inpaut
MMPT Range
Max DC input current
PV Array Configuration
Transformer
Rated Output Power
Rated Voltage
Voltage range
Grid Frequency
Grid Frequency Range
THDi
Pf
Maximum output
Current per Phase
Max Efficiency
Europian Eff
Losses At night
Stanby Consumption
Ambient Temperature
Storage Temp. Range
Relative Humidity
Cooling Method
Display
Communicaton
Ambient Sensor
MPPT Accuracy
Dimension (WXHXD)
Weight (KG)
Max Altitude Above See level
Noise
Input (DC side)
Grid (AC side)
Faults Displayed
on Display
2400A
10KV/20KV/35KV
97.8%
<1500W
10000/2800/
2200mm
19.5 T
1000 KWp
1120 KWp
64
Available
1000KW
M.V Transformer (optional)
97.4%
<1500W
Wrong Phase, Grid abnormal, Output overload, Wound component, Array reverse polarity (optional), Array fuse fail(optional)
99.9%
420V-850V
Floating Negative Ground Positive Ground
50Hz
47-53Hz
<.8%
>.99
145( need to confirm)
-25 to 55O C without de-rating
-25 to 80O C (Need to Confirm)
95% no condensation
Air
LCD
Ethernet/RS232/RS485
Temperature / Sunlight / Wind Speed
3000m
<65 dB(A)
Over voltage and under voltage
Over voltage, under voltage, over frequency, under frequency, over current and short circuit, over temperature, anti-islanding, AC earth, fault.
880V DC with Crystalline silicon /720V DC with thin film
Central Inverter - Three Phase
38
Grid Tie Inverter
TUV Test Reports
Test Reports and Certificates
39
Grid Tie Inverter
TUV Test Reports
Test Reports and Certificates
40
Grid Tie Inverter
Intertek Test Reports
Government of India Test Reports
Test Reports and Certificates
41
Grid Tie Inverter
Government of India Test Reports
Test Reports and Certificates
42
Grid Tie Inverter
Test Reports and Certificates
Government of India Test Reports
43
Grid Tie Inverter
Government of India Test Reports
Test Reports and Certificates