A.P.

REVISED STANDARD DATA

PART-III











BUILDINGS

















Basic approach and General conditions and assumptions for the preparation of
Standard Data Book for Building Works.

The Basic approach for the preparation of Standard Data for Building works is indicated as
under.
Description of Items : The description of items is given briefly and linked with the relevant specifications
in AP Standard Specifications.
Use of Machinery : For concrete work mixing is proposed with machinery as well as manually. For laying
concrete, lifting is proposed with either by winches or machinery. Manual means have been proposed for
all other items.
Working Conditions : The inputs for the Data have been analysed for the average working conditions
prevailing in the state.
Over Heads : This is assumed to include interalia the following elements:
Site accommodation, setting up plant, access road, water supply, electricity and general site
arrangements
Office furniture, equipment and communications
Provision towards expenditure on:
Corporate office of contractor
Site supervision
Documentation and "as built" drawings
Mobilisation / de-mobilisation of resources .
Labour camps with minimum amenities required as per labour laws and transportation to work sites
Light vehicles for site supervision including administrative and managerial requirements
Setting up of Laboratories for quality control, field and laboratory testing for control of quality of various
items of work and documentation of test results as per requirement of the Specifications.
Minor T&P including vibrators for concrete work and survey instruments and setting outworks, including
verification of line, dimensions, taking trial pits and bore holes, where required.
Watch and ward
Arraignment for Traffic and Traffic Management during construction.
Provision towards safeguarding environment
Sundries
Financing expenditure of the Contractor
Work Insurance / compensation.
4.1 Sales/Turnover Tax / VAT: Allow 4% and which should be exhibited separately. In agreements it
should be mentioned that it will be reimbursed as per actuals.
Contractors Profit : It is considered to allow 14% towards over head charges (Item 4) and Contractor
Profits put together.




General :
The AP Standard Specifications shall be followed with relevant BIS Specifications of various
materials and construction work.
The sources of all materials and samples of materials are required to be approved by the
Engineer-in- Charge before starting of the work.
For reinforced steel both HYSD and TMT bars continuing to IS 1786 and MS bars upto 36 mm dia
as per IS 432 Part 1 have been considered.
The Data includes inputs for testing of soil, materials and works.
The contractor shall arrange and to provide and maintain an adequate equipped field laboratory.
The Data includes inputs for testing of soil, materials and works.
The contractor shall arrange and to provide and maintain an adequate equipped field laboratory.
Quality Control of Works shall be governed by relevant AP Standard Specifications read with BIS
Specifications.
Sundries to cater for unforeseen contingency and miscellaneous items have been added in the
overheads.
The various activities of works shall also be documented in photographs and video cassettes.
The Data for various Earth Work Excavation Items including classification of soils shall be as in
Standard Data for Roads and Bridges.
The course and fine aggregates shall conform to IS : 383
Basic Inputs :
The Standard Data Book is based on the requirements of basic inputs of materials, labour and
machineries for various items.
The rates for labour, material and usage charges of machinery for the area where the project is
located are to be ascertained from local authorities/enquiries to prepare Schedule of Rates for
the area.
The basic rates of materials, such as, stone boulders, stone for masonry, stone ballast, stone
dust, moorum, gravel, lime, manure, sludge, quarry sweep, kankar, bricks, brick ballast, crushed
slag, etc. at quarry / crusher sites shall be fixed by the Board of Chief Engineers yearly (effective
from 1
st
June to 31
st
May). However, the basic rate of materials hand broken / machine broken,
crushed aggregates shall be based on Analysis in Chapter 1 of Roads & Bridges.
The cost of materials should include the cost at source and the cost of their carriage (as per
Schedule of rates arrived in Chapter 1 of Roads & Bridges for conveyance, loading and unloading
charges) upto the work site.
Labour
The labour wages should be as per rates fixed by the Board of Chief Engineers keeping the
minimum wages fixed as per Minimum Wages Act.
Skilled labour include mason, carpenter, blacksmith, mechanics and other trades.

Materials :
Quantities of materials considered in the rate analysis are approximate for the purpose of
estimation and include normal wastages. Actual consumption would depend on mix design.
The rates of material should include basic cost at locations of stone crushers/factory/rail head
and cost of its carriage to the site of work/plant including loading, unloading and stacking.

Credit for Dismantled Material: The dismantled materials should be examined and a realistic
assessment made for credit for such materials, which can be utilized for works or auctioned.
The basic rates should include all octroi charges, toll tax, sale tax, VAT, municipal taxes and other
local taxes, etc.
The Data for the following items of work shall be as per Data Items covered in AP Standard Data for Roads
& Bridges
Loading, Unloading, Carriage, Crushing of Materials
Site Clearance
Earth Work Items including classification of Excavated Material.
Horticulture
Concrete Items :
For Concrete Work, the Grades of Concrete covered by Data Book is in accordance to IS 456 :
2000. The nominal mix of concrete shall be used upto M 20 Grade only. For RCC Work, M 20
Grade nominal mix may be used in exceptional cases of Remoteness. The design mix shall
invariably used for M 20 and above Grades of Concrete as per IS 456 : 2000.
The Data accounts for inputs of Material by Weight and use of ordinary mixture or ordinary mixer
with weight batch arrangement.
The Hire charges for vibrators are included in overhead charges.
with weight batch arrangement.
The Hire charges for vibrators are included in overhead charges.
10% extra cement may be provided for concreting under water, where ever required.
Steel requirement of cement concrete work is required to be provided separately.
Plants and Equipment : The usage charges for machines include ownership charges, cost of repair and
maintenance including replacement of tyres and running and operating charges which includes crew, fuel
and lubricants. The hire charges shall be worked out based on the Guidelines issued CWC for machinery
covered in CWC Guidelines.
Measurement and Rates
Measurement of various items and their units shall be as defined in the respective Clauses of AP
Standard Specifications.
The rates for various items of work shall include all sub items defined in the respective Clauses of
AP Standard Specifications.
Privileged Document
The Standard Data Book is for Department use only. It should not be produced in any court of law as
reference/ authority and to that extent it is a privileged document.




BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-1 MORTARS
BLD-CSTN-1-1
1 Cement Mortar (1 : 1)
Unit : 1cum
A. MATERIALS:
Cement kg. 1440.00
Sand (including 5% wastage) cum 1.05
Seigniorage charges for sand cum 1.05
B. MACHINERY
- Nil - -
C. LABOUR:
Man mazdoor for mixing mortar day 0.20
Grand Total
BLD-CSTN-1-2
2 Cement Mortar (1 : 1.5)
Unit : 1cum
A. MATERIALS:
Cement kg. 960.00
Sand (including 5% wastage) cum 1.05
Seigniorage charges for sand cum 1.05
B. MACHINERY
- Nil - -
C. LABOUR:
Man mazdoor for mixing mortar day 0.20
Grand Total
BLD-CSTN-1-3
3 Cement Mortar (1 : 2)
Unit : 1cum
A. MATERIALS:
Cement kg. 720.00
Sand (including 5% wastage) cum 1.05
Seigniorage charges for sand cum
B. MACHINERY
- Nil - -
C. LABOUR:
Man mazdoor for mixing mortar day 0.20
Grand Total
BLD-CSTN-1-4
4 Cement Mortar (1 : 3)
Unit : 1cum
A. MATERIALS:
Cement kg. 480.00
Sand (including 5% wastage) cum 1.05
Seigniorage charges for sand cum 1.05
B. MACHINERY
- Nil - -
C. LABOUR:
Man mazdoor for mixing mortar day 0.20
Grand Total
BLD-CSTN-1-5
5 Cement Mortar (1 : 4)
Unit : 1cum
A. MATERIALS:
Cement kg. 360.00
Sand (including 5% wastage) cum 1.05
Seigniorage charges for sand cum 1.05
B. MACHINERY
- Nil - - -
C. LABOUR:
Man mazdoor for mixing mortar day 0.20
Grand Total
Andhra Pradesh Standard Data
Buildings
659
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-1-6
6 Cement Mortar (1 : 5)
Unit : 1cum
A. MATERIALS:
Cement kg. 288.00
Sand (including 5% wastage) cum 1.05
Seigniorage charges for sand cum 1.05
B. MACHINERY
- Nil - -
C. LABOUR:
Man mazdoor for mixing mortar day 0.20
Grand Total
BLD-CSTN-1-7
7 Cement Mortar (1 : 6)
Unit : 1cum
A. MATERIALS:
Cement kg. 240.00
Sand (including 5% wastage) cum 1.05
Seigniorage charges for sand cum 1.05
B. MACHINERY
- Nil - -
C. LABOUR:
Man mazdoor for mixing mortar day 0.20
Grand Total
BLD-CSTN-1-8
8 Cement Mortar (1 : 8)
Unit : 1cum
A. MATERIALS:
Cement kg. 180.00
Sand (including 5% wastage) cum 1.05
Seigniorage charges for sand cum 1.05
B. MACHINERY
- Nil - -
C. LABOUR:
Man mazdoor for mixing mortar day 0.20
Grand Total
BLD-CSTN-2
CONCRETE, DAMP PROOF COURSE &
REINFORCEMENT
BLD-CSTN-2-1
9 Plain Cement concrete Grade M20 - Nominal Mix
using 20mm metal with hand mixing
Unit : 1cum
A. MATERIALS:
Cement Kg 400.00
Coarse aggregate 20mm cum 0.90
Fine aggregate (Sand) cum 0.45
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.45
B. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 2.36
Water (including for curing) kl 1.20
Grand Total
Note : For Nominal Mix : Considering table 9 IS 456 : 2000,
the quantity of cement needed is 405 kgs / cum. Hence
proposed 400 kgs of cement for cum of CC M20
660
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-2-2
10 Plain Cement concrete Grade M10 - Nominal Mix
upto Plinth level
using 40mm metal using concrete mixer
Unit : 1cum
A. MATERIALS:
Cement Kg 220.00
Coarse aggregate 40mm cum 0.90
Fine aggregate (Sand) cum 0.45
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.45
Water (including for curing) kl 1.20
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.00
C. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 1.39
Grand Total
BLD-CSTN-2-3
11 PCC Grade M15 - Nominal mix 1:2.5:5 (Hand
mixing)
Unit = 1cum
A) Material
Cement kg 275.00
Coarse sand cum 0.48
40 mm aggregate cum 0.54
20 mm aggregate cum 0.27
10 mm aggregate cum 0.09
Water (including for curing) kl 1.20
B) Labour
Mason (1st Class) day 0.10
Mazdoor (Unskilled) day 2.36
Grand Total
BLD-CSTN-2-4
12 Plain Cement concrete (1:4:8) using 40 mm
metal with hand mixing upto Plinth level
Unit = 1cum
A. MATERIALS:
Cement kg 162.00
Coarse aggregate 40 mm cum 0.90
Fine aggregate (Sand) cum 0.45
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.45
Water (including for curing) kl 1.20
B. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 2.36
Grand Total
BLD-CSTN-2-5
13 Plain Cement concrete (1:4:8) using 40 mm
metal with concrete mixture. All work upto
plinth level.
Unit = 1cum
A. MATERIALS:
Cement kg 162.00
Coarse aggregate 40 mm cum 0.90
Fine aggregate (Sand) cum 0.45
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.45
Water (including for curing) kl 1.20
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.00
661
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
C. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 1.39
Water Charges 1% -
Grand Total
BLD-CSTN-2-6
14 Plain Cement concrete (1:5:10) using 40 mm
metal with hand mixing upto Plinth level
Unit = 1cum
A. MATERIALS:
Cement kg 129.60
Coarse aggregate 40 mm cum 0.90
Fine aggregate (Sand) cum 0.45
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.45
Water (including for curing) kl 1.20
B. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 2.36
Grand Total
BLD-CSTN-2-7
15 Plain Cement concrete (1:5:10) using 40 mm
metal with Concrete mixture. All work upto
plinth level.
Unit = 1cum
A. MATERIALS:
Cement kg 129.60
Coarse aggregate 40 mm cum 0.90
Fine aggregate (Sand) cum 0.45
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.45
Water (including for curing) kl 1.20
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.00
C. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 1.39
Grand Total
BLD-CSTN-2-8
16 Plain Cement concrete (1:6:10) using 40 mm
metal with hand mixing upto Plinth level
Unit = 1cum
A. MATERIALS:
Cement kg 129.60
Coarse aggregate 40 mm cum 0.90
Fine aggregate (Sand) cum 0.54
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.54
Water (including for curing) kl 1.20
B. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 2.36
Grand Total
BLD-CSTN-2-9
17 Plain Cement concrete (1:6:10) using 40 mm
metal with Concrete mixture upto Plinth level
Unit = 1cum
A. MATERIALS:
Cement kg 129.60
Coarse aggregate 40 mm cum 0.90
Fine aggregate (Sand) cum 0.54
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.54
Water (including for curing) kl 1.20
662
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.00
C. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 1.39
Grand Total
BLD-CSTN-2-10 18 Plain Cement concrete - Nominal Mix (1:3:6)
using 40mm metal with hand mixing
Unit : 1cum
A. MATERIALS:
Cement Kg 220.00
Coarse aggregate 40mm cum 0.90
Fine aggregate (Sand) cum 0.45
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.45
Water (including for curing) kl 1.20
B. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 2.36
Grand Total
BLD-CSTN-2-11
19 Plain Cement concrete (M 20) Nominal Mix using
40mm metal using concrete mixer
Unit : 1cum
A. MATERIALS:
Cement Kg 330.00
Coarse aggregate 40mm graded cum 0.90
Fine aggregate (Sand) cum 0.45
Seigniorage charges for C.A cum 0.90
Seigniorage charges for F.A cum 0.45
Water (including for curing) kl 1.20
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.00
C. LABOUR:
Mason 1
st
class
day 0.10
Mazdoor (unskilled) day 1.39
Grand Total
BLD-CSTN-2-12
20 Plain Cement concrete (M 15) Nominal Mix
1:2.5:5
using 40mm metal using concrete mixer
Unit : 1cum
A. MATERIALS:
Cement Kg 275.000
Coarse aggregate 40mm cum 0.540
Coarse aggregate 20mm cum 0.270
Coarse aggregate 10mm cum 0.090
Fine aggregate (Sand) cum 0.480
Seigniorage charges for C.A cum 0.900
Seigniorage charges for F.A cum 0.480
Water (including for curing) kl 1.20
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.000
C. LABOUR:
Mason 1
st
class
day 0.100
Mazdoor (unskilled) day 1.390
Grand Total
663
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-2-13 21 R.C.C. M-20 Nominal Mix
NEW RCC M- 20 Nominal mix (Cement:fine aggregate:
coarse aggregate) corresponding to Table 9 of IS
456 using 20mm size graded machine crushed hard
granite metal (coarse aggregate) from approved
quarry including cost and conveyance of all
materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site and including
Seigniorage charges, sales & other taxes on all
materials including all operational, incidental and
labour charges such as machine mixing, laying
concrete, curing etc.,complete but excluding cost of
steel and its fabrication charges for finished item of
work, but excluding centering, shuttering.
A FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth)
A. MATERIALS:
20mm HBG graded metal cum 0.900
Sand cum 0.450
Cement Kgs 400.000
B. LABOUR:
1st Class Mason day 0.133
2nd Class Mason day 0.267
Mazdoor (Both Men and Women) day 3.600
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.000
Cost of Diesel for Miller Liters 0.133
Cost of Petrol for Vibrator Liters 0.667
Water (including for curing) kl 1.200
BASIC COST per 1 cum
B COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN
BUILDINGS
A. MATERIALS:
20mm HBG graded metal cum 0.900
Sand cum 0.450
Cement Kgs 400.000
B. LABOUR:
1st Class Mason day 0.167
2nd Class Mason day 0.167
Mazdoor (Both Men and Women) day 4.700
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.000
Water (including for curing) kl 1.200
BASIC COST per 1 cum
C RCC SLABS, BEAMS
A. MATERIALS:
20mm HBG graded metal cum 0.900
Sand cum 0.450
Cement Kgs 400.000
B. LABOUR:
1st Class Mason day 0.067
2nd Class Mason day 0.133
Mazdoor (Both Men and Women) day 2.500
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 0.267
Water (including for curing) kl 1.200
BASIC COST per 1 cum
664
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
DESIGN MIX CONCRETE (WEIGH BATCH at
SITE)
BLD-CSTN-2-14
22 Supply and placing of the Design Mix Concrete
corresponding to IS 456 using WEIGH BATCHER / MIXER
with 20mm size graded machine crushed hard granite
metal (coarse aggregate) from approved quarry including
cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site and
including Seigniorage charges, sales & other taxes on all
materials including all operational, incidental and labour
charges such as weigh batching, machine mixing, laying
concrete, curing etc.,complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS
No. 402)with minimum cement content as per IS code from
standard suppliers approved by the department including
pumping, centering, shuttering, laying concrete, vibrating,
curing etc. complete but excluding cost of steel and its
fabrication charges for finished item of work.
A FOUNDATIONS, PLINTH, PEDESTALS (Below
Plinth)
ANY GRADE OF MIX
20mm HBG graded metal cum 0.80
Sand cum 0.40
1st Class Mason day 0.133
2nd Class Mason day 0.267
Mazdoor (Both Men & Women) day 4.600
Weigh Batcher Hire charges (Machine mixing)
charges
h 1.333
Water (including for curing) kl 1.200
BASIC COST per 1 cum
B COLUMNS, LINTELS, WATER TANKS, RCC
WALLS IN BUILDINGS
ANY GRADE OF MIX
20mm HBG graded metal cum 0.80
Sand cum 0.40
1st Class Mason day 0.167
2nd Class Mason day 0.167
Mazdoor (Both Men & Women) day 5.600
Weigh Batcher Hire charges (Machine mixing) H 1.333
Water (including for curing) kl 1.200
BASIC COST per 1 cum
C RCC SLABS, BEAMS
ANY GRADE OF MIX
20mm HBG graded metal cum 0.80
Sand cum 0.40
1st Class Mason day 0.067
2nd Class Mason day 0.133
Mazdoor (Both Men & Women) day 3.077
Weigh Batcher Hire charges (Machine mixing) h 0.308
Water (including for curing) kl 1.200
BASIC COST per 1 cum
For Design mix concrete, allow Cement as follows (for
estimate purpose only) :
Kgs
350
380
400
420
430
M 25
M 30
M 35
M 40
Note : Quantity of cement proposed for various design mixes is for
estimating purpose only. Actual quantity of cement will be as per
approved mix design. Similarly quantity for coarse and fine
aggregates is for estimating purpose and the exact quantity shall be
as per the mix design. Nominal mix of grades M20 is to be used with
adequate supervision and quality control requirements.
Excluding Cement cost
Grade
M 20
665
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-2-15
23 Supply and placing of the Ready Mix (RMC)
Standard Design Mix Concrete grade as per IS
4926-2003 with minimum cement content as per
IS code 456-2000 using 20 mm graded metal,
from standard suppliers approved by the
department including pumping, laying concrete,
vibrating, curing etc. complete but excluding
cots of steel and its fabrication charges,
centering, shuttering for finished item of work.
A FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth)
Unit : 1cum
A. MATERIALS:
Coarse aggregate 20mm graded cum 0.80
Fine aggregate (Sand) cum 0.40
Seigniorage charges for C.A cum 0.80
Seigniorage charges for F.A cum 0.40
Water (including for curing) kl 1.20
B. MACHINERY
Batching plant at 20 cum per hour hour 0.222
Transit mixer 4cum capacity for lead upto 1km hour 0.222
Concrete Pump day 0.222
C. LABOUR:
Mason 1
st
class
day 0.056
Mason 2
nd
class
day 0.056
Mazdoor (unskilled) day 0.917
Grand Total
Note : Wherever concrete is carried out using
batching plant, transit mixer, concrete pump, then
Admixtures @ 0.4% of weight of cement may be
added for achieving desired slump of concrete. If
concentrated Admixture is proposed, only 0.04% of
weight of Cement shall be used.
B COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN
BUILDINGS
Unit : 1cum
A. MATERIALS:
Coarse aggregate 20mm graded cum 0.80
Fine aggregate (Sand) cum 0.40
Seigniorage charges for C.A cum 0.80
Seigniorage charges for F.A cum 0.40
Water (including for curing) kl 1.20
B. MACHINERY
Batching plant at 20 cum per hour hour 0.444
Transit mixer 4cum capacity for lead upto 1km hour 0.444
Concrete Pump day 0.444
C. LABOUR:
Mason 1
st
class
day 0.111
Mason 2
nd
class
day 0.222
Mazdoor (unskilled) day 1.556
Grand Total
C RCC SLABS, BEAMS
Unit : 1cum
A. MATERIALS:
Coarse aggregate 20mm graded cum 0.80
Fine aggregate (Sand) cum 0.40
Seigniorage charges for C.A cum 0.80
Seigniorage charges for F.A cum 0.40
Water (including for curing) kl 1.20
Excluding Cement any
Grade.
666
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
B. MACHINERY
Batching plant at 20 cum per hour hour 0.133
Transit mixer 4cum capacity for lead upto 1km hour 0.133
Concrete Pump day 0.133
C. LABOUR:
Mason 1
st
class
day 0.033
Mason 2
nd
class
day 0.067
Mazdoor (unskilled) day 0.433
Grand Total
Kgs
350
380
400
420
430
Description of Structure
a. FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth)
b. COLUMNS, LINTELS, WATER TANKS, RCC WALLS 1.333 Hrs
c. RCC SLABS, BEAMS 0.267 Hrs
BLD-CSTN-2-16
24 Damp proof course 40mm thick with cement concrete
(1:2:4 Nominal mix), using 12mm hard broken stone
aggregate including cost of all materials, seigniorage
charges, excluding conveyance charges of materials,
including the cost of machinery, labour charges,
mixing, placing in position, leveling, vibrating, curing
etc. complete for finished item of work. (Using concrete
mixer)
Unit = 25 sqm
A. MATERIALS:
Cement kgs 320.00
Coarse aggregate 12mm cum 0.90
Fine aggregate (sand) cum 0.45
Seigniorage charges of coarse aggregate cum 0.90
Seigniorage charges of sand cum 0.45
Form work L.S.
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.00
C. LABOUR:
Mason 1
st
class
day 0.1
Mazdoor (unskilled) day 1.98
D. Grand Total for 25 sqm
Rate per Sqm = D/25
Nil Nil
10%
10%
M 40
Note: LIFT CHARGES - for all RCC Items
1. For Lift Charges of Labour, increase @ 10% on labour charges for each upper
floor on Ground Floor Rate
2. For Lift Charges of Materials only, for lifting Concrete above 6.1 M (2nd floor
onwards)
Winch/ Lift hire charges may be allowed at following rates:
Basic Rate for 2nd
Floor (6.1 M)
for each
additional floor
(3.05 M) over
and above 2nd
floor (6.1 M)
M 20
M 25
M 30
M 35
For Design mix concrete, allow Cement as follows (for
estimate purpose only) :
Grade
667
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-2-17
25 Damp proof course 50mm thick with 1:2:4 cement
concrete Nominal mix, using 12mm hard broken stone
aggregate including cost of all materials, seigniorage
charges, excluding conveyance charges of materials
including the cost of machinery, labour charges,
mixing, placing in position, leveling, vibrating, curing
etc. complete for finished item of work. (Using concrete
mixer)
Unit = 20 sqm
A. MATERIALS:
Cement kgs 320.00
Coarse aggregate 12mm cum 0.90
Fine aggregate (sand) cum 0.45
Seigniorage charges of coarse aggregate cum 0.90
Seigniorage charges of sand cum 0.45
Form work L.S.
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.00
C. LABOUR:
Mason 1
st
class
day 0.1
Mazdoor (unskilled) day 1.98
D. Grand Total for 20 sqm
Rate per Sqm = D/20
BLD-CSTN-2-18
26
11.7
Supplying, fitting and placing HYSD bar
reinforcement in foundation complete as per
drawings and technical specifications for Bars
below 36 mm dia including over laps and
wastage, where they are not welded
Unit = t
(a) Material
HYSD bars including 5 per cent for overlaps and
wastage
t 1.05
Binding wire kg 6.00
(b) Labour for cutting, bending, shifting to site,
tying and placing in position
Blacksmith / Bar bender day 2.00
Mazdoor (Unskilled) day 6.40
Sundries on Material
(c) Overheads on (a+b)
(d) Contractors profit on (a+b+c)
Rate per t = a+b+c+d
A Supplying, fitting and placing HYSD bar
reinforcement in foundation complete including
wastage, as per drawings and technical
specifications Clauses 1000 and 1202 MORD &
1100, 1600 MORTH for Bars 36 mm dia and
above, where welding required to be done
compulsorily.
Unit = t
(a) Material
HYSD bars including 2.5 per cent for wastage t 1.025
Welding Electrodes @ 5 per joint (14 joints / ton) each 70.000
Welding Charges (Hire charges of Welding
Machine)
Hr 10.00
Binding wire kg 6.00
1000
&
1200
1000
&
1200
668
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
(b) Labour for cutting, bending, shifting to site,
tying and placing in position
Welder day 2.50
Blacksmith day 2.00
Mazdoor (Unskilled) day 6.40
(c) Overheads on (a+b)
(d) Contractors profit on (a+b+c)
Rate per t = a+b+c+d
BLD-CSTN-2-19
27
11.8
Supplying, fitting and placingTMT bar
reinforcement in foundation complete as per
drawings and technical specifications for Bars
below 36 mm dia including over laps and
wastage, where they are not welded.
Unit = t
(a) Material
TMT bars including 5 per cent for overlaps and
wastage
t 1.05
Binding wire kg 6.00
(b) Labour for cutting, bending, shifting to site,
tying and placing in position
Blacksmith / Bar bender day 2.00
Mazdoor (Unskilled) day 6.40
(c) Overheads on (a+b)
(d) Contractors profit on (a+b+c)
Rate per t = a+b+c+d
A Supplying, fitting and placingTMT bar
reinforcement in foundation complete including
wastage, as per drawings and technical
specifications Clauses 1000 and 1202 MORD &
1100, 1600 MORTH for Bars 36 mm dia and
above, where welding required to be done
compulsorily.
Unit = t
(a) Material
TMT bars including 2.5 per cent for wastage t 1.025
Welding Electrodes @ 5 per joint (14 joints / ton) each 70.000
Welding Charges (Hire charges of Welding
Machine)
Hr 10.00
Binding wire kg 6.00
(b) Labour for cutting, bending, shifting to site,
tying and placing in position
Welder day 2.50
Blacksmith day 2.00
Mazdoor (Unskilled) day 6.40
(c) Overheads on (a+b)
(d) Contractors profit on (a+b+c)
Rate per t = a+b+c+d
BLD-CSTN-2-20
28
11.9
Supplying, fitting and placing MS bar
reinforcement in foundation complete as per
drawings and technical specifications for Bars
below 36 mm dia including over laps and
wastage, where they are not welded
Unit = t
(a) Material
MS bars including 5 per cent for overlaps and
wastage
t 1.05
Binding wire kg 6.00
(b) Labour for cutting, bending, shifting to site, tying
and placing in position
Blacksmith / Bar bender day 2.00
Mazdoor (Unskilled) day 6.40
1000
&
1200
1000
&
1200
669
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
(c) Overheads on (a+b)
(d) Contractors profit on (a+b+c)
Rate per t = a+b+c+d
BLD-CSTN-3 BRICK WORK, HONEY - COMBWORK
BLD-CSTN-3-1
29 Brick Masonry in CM (1:3) with Bricks with
traditional size 23 x 11 x 7 cms 2nd class
a Unit = 1cum
i A. MATERIALS:
Cement kg 96.00
Bricks traditional size 23 x 11 x 7 cms 2nd class Nos 512.00
Fine aggregate (Sand) cum 0.20
Seigniorage charges for F.A cum 0.20
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
Note : For Bricks 2.4 % wastage taken.
ii Brick Masonry in CM (1:4) with Bricks traditional
size 23 x 11 x 7 cms 2nd class
Unit = 1cum
A. MATERIALS:
Cement kg 72.00
Bricks traditional size 23 x 11 x 7 cms 2nd class Nos 512.00
Fine aggregate (Sand) cum 0.20
Seigniorage charges for F.A cum 0.20
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
iii Brick Masonry in CM (1:5) with Bricks traditional
size 23 x 11 x 7 cms 2nd class
Unit = 1cum
A. MATERIALS:
Cement kg 57.60
Bricks traditional size 23 x 11 x 7 cms 2nd class Nos 512.00
Fine aggregate (Sand) cum 0.20
Seigniorage charges for F.A cum 0.20
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
670
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
iv Brick Masonry in CM (1:6) with 2nd class Bricks
traditional size 23 x 11 x 7 cms
Unit = 1cum
A. MATERIALS:
Cement kg 48.00
Bricks traditional size 23 x 11 x 7 cms 2nd class Nos 512.00
Fine aggregate (Sand) cum 0.20
Seigniorage charges for F.A cum 0.20
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
v Brick Masonry in CM (1:8) with Bricks traditional
size 23 x 11 x 7 cms 2nd Class
Unit = 1cum
A. MATERIALS:
Cement kg 36.00
Bricks traditional size 23 x 11 x 7 cms 2nd class Nos 512.00
Fine aggregate (Sand) cum 0.20
Seigniorage charges for F.A cum 0.20
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
b Brick Masonry in CM (1:3) with Bricks
traditional size 23 x 11 x 7 cms 1st Class
Unit = 1cum
A. MATERIALS:
Cement kg 96.00
Bricks1st Class traditional size 23 x 11 x 7 cms Nos 512.00
Fine aggregate (Sand) cum 0.20
Seigniorage charges for F.A cum 0.20
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
Note : 1. When Mortar mix is changed as CM 1:4, 1:5, 1:6
and 1:8, proportionate quantity of cement has to be
substituted. No change in other data.
2. When First class Modular Bricks are used provide 570
nos bricks of size 19 x 9 x 9 cms.
671
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-3-2
30 Brick Masonry in CM (1:3) with Modular Bricks
19 x 9 x 9 cms 2nd class
i Unit = 1cum
A. MATERIALS:
Cement kg 100.60
Bricks modular size 19 x 9 x 9 cms 2nd class Nos 520.00
Fine aggregate (Sand) cum 0.21
Seigniorage charges for F.A cum 0.21
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
ii Brick Masonry in CM (1:4) with Modular Bricks
19 x 9 x 9 cms 2nd class
Unit = 1cum
A. MATERIALS:
Cement kg 75.60
Bricks modular size 19 x 9 x 9 cms 2nd class Nos 520.00
Fine aggregate (Sand) cum 0.21
Seigniorage charges for F.A cum 0.21
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
iii Brick Masonry in CM (1:5) with Modular Bricks
19 x 9 x 9 cms 2nd class
Unit = 1cum
A. MATERIALS:
Cement kg 60.48
Bricks modular size 19 x 9 x 9 cms 2nd class Nos 520.00
Fine aggregate (Sand) cum 0.21
Seigniorage charges for F.A cum 0.21
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
iv Brick Masonry in CM (1:6) with Modular Bricks
19 x 9 x 9 cms 2nd class
Unit = 1cum
A. MATERIALS:
Cement kg 50.40
Bricks modular size 19 x 9 x 9 cms 2nd class Nos 520.00
Fine aggregate (Sand) cum 0.21
Seigniorage charges for F.A cum 0.21
B. LABOUR:
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
iv Brick Masonry in CM (1:8) with Modular Bricks
19 x 9 x 9 cms 2nd class
Unit = 1cum
A. MATERIALS:
Cement kg 37.80
Bricks modular size 19 x 9 x 9 cms 2nd class Nos 520.00
Fine aggregate (Sand) cum 0.21
Seigniorage charges for F.A cum 0.21
B. LABOUR:
672
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Mason 1
st
class
day 0.24
Mason 2
nd
class
day 0.56
Mazdoor (unskilled) day 1.89
Grand Total
BLD-CSTN-3-3
31 11.5 cm wide Brick masonry for super-structure
on ground floor in cm (1:3) using second class
traditional size bricks including cost of all
materials, seigniorage charges, labour and all
operations for constructing half brick masonry,
mixing cement mortar, curing etc., complete for
finished item of work, but excluding conveyance
charges of materials.
unit:10sqm
A. MATERIALS:
Country bricks, second class traditional size
23x11x7cm
nos 565.000
Cement kg. 106.000
Sand cum 0.220
Seigniorage charges for sand cum 0.220
B. LABOUR:
Mason 1
st
class
day 0.600
Mason 2
nd
class
day 0.600
Mazdoor (unskilled) day 2.750
Add water charges 1% 1.00%
Grand Total
BLD-CSTN-3-4
32 Reinforced Brick Masonary walls of 11.5cm in CM(1:6)
using FlyAsh bricks having a crushing strength of not less
than 35.00kg/cm2 and using two mild steel bars of 6m dia
in every third layer of brick masory, with free joints of the
main block work including cost and seignorage charges
and conveyance of all materials and water from approved
sources to work site and all operational, incidental, labour
charges such as scaffolding mixing mortor constructing
masonary lift charges, curing etc. complete but excluding
the cost of steel and its fabrication charges for finished
item of work as per SS 509
Ground Floor :
A. MATERIALS:
II Class Bricks cum 512.000
C.M.(1:6) cum 0.200
B. LABOUR:
Mason 1
st
class
day 0.600
Mason 2
nd
class
day 0.600
Mazdoor (unskilled) day 2.750
Grand Total
BLD-CSTN-3-5
33 Exposed brick masonry for super structure on
ground floor in cm (1:6) using wire cut bricks or
moulded bricks including making horizontal and
vertical grooves 10mm Wide 12mm deep, cost of
all materials, seigniorage charges, labour and all
operations, mixing cement mortar, curing etc.,
complete for finished item of work, but
excluding conveyance charges of materials
unit:1cum
A. MATERIALS:
Wire cut bricks or moulded bricks size 19x9x9cm nos 520.000
Cement kg. 48.00
673
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Sand cum 0.20
Seigniorage charges for sand cum 0.20
B. LABOUR:
Mason 1
st
class
day 0.57
Mason 2
nd
class
day 0.57
Mazdoor (unskilled) day 2.54
Add water charges 1% 1.00%
Grand Total
Note : Compressive strength of individual Brick
shall not be less than 70 kg / cm
2
BLD-CSTN-3-6
34 Brickwork in arches in cement mortar 1:4
complete including centering and shuttering
excluding pointing and plastering as per
drawing and technical specifications Clauses
606 and 1205.1 MORD
Unit = cum
a) Material
Brick 1st class Nos. 525.00
Cement mortar (1:4) cum 0.24
b) Labour
Mazdoor (Unskilled) day 1.88
Mason (1st Class) day 2.00
c) Add for centering and shuttering @ 110% of
(a+b)
Grand Total
BLD-CSTN-3-7
35 Honey Comb work with Bricks of traditional Size
and Plastered One Coat 10 mm. thick Cement
Mortar 1:5 including White Washing 2 Coats
Unit = cum
a) Material
Brick 2nd class 23 x 11 x 7 Nos. 750.00
Cement mortar (1:5) cum 0.67
b) Labour
Mazdoor (Unskilled) day 6.60
Mason (1st Class) day 2.41
Mason (2nd Class) day 6.21
White Washing 2 Coats LS LS
Grand Total
BLD-CSTN-3-8
36 Honey Comb work with Bricks of Modular Size
and Plastered One Coat 10 mm. thick Cement
Mortar 1:5 including White Washing 2 Coats
Unit = cum
a) Material
Brick 2nd class 19 x 9 x 9 Nos. 790.00
Cement mortar (1:5) cum 0.67
b) Labour
Mazdoor (Unskilled) day 6.60
Mason (1st Class) day 2.41
Mason (2nd Class) day 6.21
White Washing 2 Coats LS LS
Grand Total
Note : 1 ) In case cement mortar 1:3 is used, proportionate rate is to be adopted.
2) Quantity of bricks for arches will be about 10 per cent more than that for ordinary
brickwork .
3) In case special arch bricks are used, the quantity of bricks per cum shall be taken as
580 Nos.
4) Rates for spandrel walls shall be taken same as for brickwork in substructure.
5) Rate for spandrel filling will depend on the filling material adopted
6) Compressive strength of individual Brick shall not be less than 70 kg / cm2
674
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-4
STONE MASONRY, DAMP PROOF COURSE,
DRY STONE PACKING, QUARRY RUBBISH &
GRAVEL BACKING
BLD-CSTN-4-1
37 Cut Stone Masonry in CM 1:2
Unit = 1cum
A. MATERIALS:
Cement kg 115.20
Cut Stone Roughly dressed to shape at quarry cum 0.89
Bond Stones cum 0.16
Fine aggregate (Sand) cum 0.16
Seigniorage charges for F.A cum 0.16
B. LABOUR:
Mason 1
st
class
day 1.05
Mason 2
nd
class
day 2.45
Man mazdoor day 3.50
Woman mazdoor day 2.80
Grand Total
BLD-CSTN-4-2
38 CRS Masonry in CM (1:2) 1st Sort
i Unit = 1cum
A. MATERIALS:
Cement kg 201.60
Coursed Rubble Stone cum 0.94
Bond Stones 7Nos 0.24 x 0.24 x 0.39 = 0.16cum 7Nos. 0.16
Fine aggregate (Sand) cum 0.28
Seigniorage charges for F.A cum 0.28
Seigniorage charges for Stone cum 1.10
B. LABOUR:
Mason 1
st
class
day 2.50
Mazdoor (unskilled) day 2.32
Grand Total
ii CRS Masonry in CM (1:3) 1st Sort
Unit = 1cum
A. MATERIALS:
Cement kg 134.40
Coursed Rubble Stone cum 0.94
Bond Stones 7Nos 0.24 x 0.24 x 0.39 = 0.16cum 7Nos. 0.16
Fine aggregate (Sand) cum 0.28
Seigniorage charges for F.A cum 0.28
Seigniorage charges for Stone cum 1.10
B. LABOUR:
Mason 1
st
class
day 2.50
Mazdoor (unskilled) day 2.32
Grand Total
iii CRS Masonry in CM (1:4) 1st Sort
Unit = 1cum
A. MATERIALS:
Cement kg 100.80
Coursed Rubble Stone cum 0.94
Bond Stones 7Nos 0.24 x 0.24 x 0.39 = 0.16cum 7Nos. 0.16
Fine aggregate (Sand) cum 0.28
Seigniorage charges for F.A cum 0.28
Seigniorage charges for Stone cum 1.10
B. LABOUR:
Mason 1
st
class
day 2.50
Mazdoor (unskilled) day 2.32
Grand Total
Note : When Mortar mix is changed as CM 1:3, 1:4, 1:5, 1:6
and 1:8, proportionate quantity of cement has to be
substituted. No change in other data.
675
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
iv CRS Masonry in CM (1:6) 1st Sort
Unit = 1cum
A. MATERIALS:
Cement kg 67.20
Coursed Rubble Stone cum 0.94
Bond Stones 7Nos 0.24 x 0.24 x 0.39 = 0.16cum 7Nos. 0.16
Fine aggregate (Sand) cum 0.28
Seigniorage charges for F.A cum 0.28
Seigniorage charges for Stone cum 1.10
B. LABOUR:
Mason 1
st
class
day 2.50
Mazdoor (unskilled) day 2.32
Grand Total
BLD-CSTN-4-3
39 CRS Masonry in CM (1:6) 2nd Sort
Unit = 1cum
A. MATERIALS:
Cement kg 76.80
Coursed Rubble Stone cum 0.94
Bond Stones 7Nos 0.24 x 0.24 x 0.39 = 0.16cum cum 0.16
Fine aggregate (Sand) cum 0.32
Seigniorage charges for F.A cum 0.32
Seigniorage charges for Stone cum 1.10
B. LABOUR:
Mason 1
st
class
day 1.50
Mazdoor (unskilled) day 2.32
Grand Total
BLD-CSTN-4-4
40 Coursed rubble stone masonry arch (Ist sort) in
cement mortar (1:4) complete including
centering etc. complete as per drawing and
technical specifications Clauses 706 and 1205.1
Unit = cum
A. Material
Stone for CR masonry 1st sort cum 0.94
Through and bond stone (7 Nos 0.24x0.24x0.39 =
0.16 cum)
Nos. 0.16
Cement mortar (Rate as in item 11.5 II) cum 0.30
B. Labour
Mason (1st Class) day 3.00
Mazdoor (Unskilled) day 2.43
C. Add for centering and shuttering @ 100 % of
(a+b)
Grand Total
BLD-CSTN-4-5
41 Ashlar Arch Work in Cement Mortar (1:4)
Unit = 1cum
A. MATERIALS:
Cement kg 57.60
Cut Stone Roughly dressed to shape at quarry cum 0.89
Bond Stones of Cutstone quality 0.16
Fine aggregate (Sand) cum 0.16
Seigniorage charges for F.A cum 0.16
Note : 1) In case cement mortar 1:3 is used,
proportionate rate is to be adopted.
Note : When Mortar mix is changed proportionate quantity of
cement has to be substituted. No change in other data.
2) The addition for centering and sluttering at (c) above is for arch
above 6 m span. For lesser span length the addition shall be 80 per
cent for span above 4 m length and 50 per cent for spans less than 4
m.
676
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
B. LABOUR:
Mason 1
st
class
day 5.05
Mason 2
nd
class
day 2.45
Mazdoor (unskilled) day 6.30
Centering Charges LS
Grand Total
BLD-CSTN-4-6
42 Rubble Arch Work in Cement Mortar (1:4)
Unit = 1cum
A. MATERIALS:
Cement kg 100.80
Seleted Stone of sizes as per specification
(including Bond Stones)
cum 1.15
Fine aggregate (Sand) cum 0.28
Seigniorage charges for F.A cum 0.28
B. LABOUR:
Mason 1
st
class
day 0.90
Mason 2
nd
class
day 2.10
Mazdoor (unskilled) day 2.43
Centering Charges LS
Grand Total
BLD-CSTN-4-7
43 Providing & Laying reinforced cement concrete
arch complete including centering and
shuttering excluding reinforcement as per
drawings and technical specifications Clauses
800, 900 and 1205.1
Unit = cum
I RCC grade M20 nominal mix
a) Material
Cement t 0.40
Coarse sand cum 0.45
20 mm aggregate cum 0.54
10 mm aggregate cum 0.36
b) Labour
Mason (1st Class) day 0.20
Mazdoor (Unskilled) day 2.15
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 0.40
d) Add for cost of centering and shuttering @ 50 per
cent of (a+b) per sqm of surface of arch soffit
Grand Total
II RCC Grade M 25 (Design mix)
a) Material
Cement t 0.38
Coarse sand cum 0.45
20 mm aggregate cum 0.54
10 mm aggregate cum 0.36
b) Labour
Mason (1st Class) day 0.20
Mazdoor (Unskilled) day 2.15
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 0.40
d) Add for cost of centering and shuttering @ 50 per
cent of (a+b) per sqm of surface of arch soffit
Grand Total
Note : The additional cost of centering and shuttering @ 50 per cent
of cost of material and labour shall hold good for arch spans of 6 m
and above. For lesser length of spans, the corresponding additional
cost can be taken as 40 per cent for spans above 4 m length and 30
per cent for spans less than 4 m.
677
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-4-8
44 RR Masonry in CM (1:6)
Unit = 1cum
A. MATERIALS:
Cement kg 79.20
CR Stone cum 0.44
Rough Stone cum 0.50
Bond Stones 7Nos 0.24 x 0.24 x 0.39 = 0.16cum cum 0.16
Fine aggregate (Sand) cum 0.33
Seigniorage charges for F.A cum 0.33
Seigniorage charges for Stone cum 1.10
B. LABOUR:
Mason 1
st
class
day 1.20
Mazdoor (unskilled) day 2.00
Grand Total
BLD-CSTN-4-9
45 RR Masonry in CM (1:8)
Unit = 1cum
A. MATERIALS:
Cement kg 59.40 .
CR Stone cum 0.44
Rough Stone cum 0.50
Bond Stones 7Nos 0.24 x 0.24 x 0.39 = 0.16cum cum 0.16
Fine aggregate (Sand) cum 0.33
Seigniorage charges for F.A cum 0.33
Seigniorage charges for Stone cum 1.10
B. LABOUR:
Mason 1
st
class
day 1.20
Mazdoor (unskilled) day 2.00
Grand Total
BLD-CSTN-4-10 46 Dry Stone Masonry for Retaining Walls
Unit = 1cum
A. MATERIALS:
Rough Stone cum 1.04
Bond Stones 7Nos 0.24 x 0.24 x 0.39 = 0.16cum cum 0.16
Seigniorage charges for Stone cum 1.20
B. LABOUR:
Mason 1
st
class
day 0.33
Mason 2
nd
class
day 0.77
Mazdoor (unskilled) day 1.10
Grand Total
BLD-CSTN-4-11 47 Dry Stone Masonry for Well steining
Unit = 1cum
A. MATERIALS:
Rough Stone cum 1.04
Bond Stones cum 0.16
Seigniorage charges for Stone cum 1.20
B. LABOUR:
Mason 1
st
class
day 0.45
Mason 2
nd
class
day 1.05
Mazdoor (unskilled) day 1.10
Grand Total
Note : When Mortar mix is changed proportionate quantity
of cement has to be substituted. No change in other data
678
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-4-12
48 Damp Proof, Course Damp Proof (or anti Proof)
Course with Cuddapah / Shabad slabs 50 mm.
thick in CM (1:3) (Unit - 10 sqm)
A. MATERIALS:
Cuddapah / Shabad slabs 50 mm. thick sqm 10.50
Cement Mortar 1:3 cum 0.15
Seigniorage charges for Stone
B. LABOUR:
Mason 1
st
class
day 0.90
Mason 2
nd
class
day 2.10
Mazdoor (unskilled) day 2.00
Grand Total
BLD-CSTN-5 POINTING
BLD-CSTN-5-1
49 Flush Pointing with CM (1:3) to Brick / CRS
Masonry
Unit = 10 sqm
A. MATERIALS:
Cement kg 14.40
Fine aggregate (Sand) cum 0.03
Seigniorage charges for F.A cum 0.03
B. LABOUR:
Mason 2
nd
class
day 0.50
Mazdoor (unskilled) day 0.74
Grand Total
BLD-CSTN-5-2
50 Flush Pointing with CM (1:3) to RR Masonry
Unit = 10 sqm
A. MATERIALS:
Cement kg 14.40
Fine aggregate (Sand) cum 0.03
Seigniorage charges for F.A cum 0.03
B. LABOUR:
Mason 2
nd
class
day 0.50
Mazdoor (unskilled) day 0.74
Grand Total
BLD-CSTN-5-3
51 Raised Pointing with CM (1:3) to RR Masonry
Unit = 10 sqm
A. MATERIALS:
Cement kg 28.80
Fine aggregate (Sand) cum 0.06
Seigniorage charges for F.A cum 0.06
B. LABOUR:
Mason 2
nd
class
day 0.50
Mazdoor (unskilled) day 0.74
Grand Total
BLD-CSTN-5-4
52 Raised and cut pointing on coursed or Ashlar stone
masonry or concrete block walling in white cement mortar 1
: 3 (1 white cement : 3 marble dust).
Details of cost for 10 sq.m
Materials :-
Cement mortar 1 :4 cum 0.038
Labour :
Mason llnd class day 1.460
Mazdoor (unskilled) day 2.260
Add for water charges @ 1 %
Add for contractor's profit and overheads @ 10%
Cost for 10 sq.m.
Cost per sq.m
Note : When Mortar mix is changed as CM 1:4
proportionate quantity of cement has to be substituted. No
change in other data.
679
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-6 PLASTERING
BLD-CSTN-6-1
53 Plastering with CM (1:3), 12 mm thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortar (1:3) cum 0.15
Seigniorage charges for F.A cum 0.15
B. LABOUR:
Mason 1
st
class
day 0.60
Mazdoor (unskilled) day 0.96
Grand Total
BLD-CSTN-6-2 54 Plastering with CM (1:4), 12 mm thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortar (1:4) cum 0.15
Seigniorage charges for F.A cum 0.15
B. LABOUR:
Mason 1
st
class
day 0.60
Mazdoor (unskilled) day 0.96
Grand Total
BLD-CSTN-6-3 55 Plastering with CM (1:5), 12 mm thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortor (1:5) cum 0.150
Seigniorage charges for F.A cum 0.150
B. LABOUR:
Mason 1
st
class
day 0.60
Mazdoor (unskilled) day 0.96
Grand Total
BLD-CSTN-6-4
56 Plastering with CM (1:6), 12 mm thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortor (1:6) cum 0.15
Seigniorage charges for F.A cum 0.15
B. LABOUR:
Mason 1
st
class
day 0.60
Mazdoor (unskilled) day 0.96
Grand Total
BLD-CSTN-6-5 57 Plastering with CM (1:8), 12 mm thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortor (1:5) cum 0.15
Seigniorage charges for F.A cum 0.15
B. LABOUR:
Mason 1
st
class
day 0.60
Mazdoor (unskilled) day 0.96
Grand Total
680
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-6-6
58 Plastering with CM (1:4), 15 mm thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortar (1:4) cum 0.19
Seigniorage charges for F.A cum 0.19
B. LABOUR:
Mason 2
nd
class
day 0.60
Mazdoor (unskilled) day 0.96
Grand Total
BLD-CSTN-6-7 59 Plastering with CM (1:4), 20 mm thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortar (1:4) cum 0.210
Seigniorage charges for F.A cum 0.21
B. LABOUR:
Mason 2
nd
class
day 0.94
Mazdoor (unskilled) day 1.60
Grand Total
BLD-CSTN-6-8
60 Plastering with CM (1:3), 20 mm thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortar (1:3) cum 0.210
Seigniorage charges for F.A cum 0.21
B. LABOUR:
Mason 2
nd
class
day 0.94
Mazdoor (unskilled) day 1.60
Grand Total
BLD-CSTN-6-9
61 Plastering with CM 2 coats, 20 mm thick, base
coat in CM (1:6), 16mm thick and top coat in CM
(1:4), 4mm thick with Dubara sponze finishing.
.
Unit = 10 sqm
A. MATERIALS:
Base Coat in CM(1:6), 16 mm thick
Cement kg 43.00
Fine aggregate (Sand) cum 0.18
Top Coat in CM(1:4), 4 mm thick
Cement kg 14.50
Fine aggregate (Sand) cum 0.04
Seigniorage charges for F.A cum 0.22
B. LABOUR:
Mason 1
st
class
day 0.63
Mason 2
nd
class
day 1.47
Mazdoor (unskilled) day 3.90
Grand Total
BLD-CSTN-6-10
62 Plastering with CM 2 coats, 12 mm thick, base
coat in CM (1:5), 8mm thick and top coat in CM
(1:3), 4mm thick with sponze finishing.
Unit = 10 sqm
A. MATERIALS:
Base Coat in CM(1:5), 8 mm thick
Cement kg 31.70
Fine aggregate (Sand) cum 0.11
Top Coat in CM(1:3), 4 mm thick
Cement kg 19.20
Fine aggregate (Sand) cum 0.04
Note : When Mortar mix is changed proportionate quantity of
cement has to be substituted
Note : When Mortar mix is changed proportionate quantity of
cement has to be substituted
681
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Seigniorage charges for F.A cum 0.15
B. LABOUR:
Mason 1
st
class
day 0.63
Mason 2
nd
class
day 1.47
Mazdoor (unskilled) day 3.90
Grand Total
BLD-CSTN-6-11
63
Unit - 10 sqm
A) MATERIALS
Rabbit wire mesh (1.0 M panna for 0.6 M drop) sqm 13.30
Cement Mortar 1:3 for 25 mm thick cum 0.25
Dry Cement for making Lumps kg 50.00
12 mm Plastering 2 coats in 1:4 & 1:2 cm both
sides
sqm 21.80
Excluding HYSD Steel/ Mild steel & Binding wire
B) LABOUR CHARGES
1st Class Mason day 8.00
Miller Operator day 1.00
Mazdoor (unskilled) day 10.00
c) Machinery 32.00
Machine Mixing Mortar with Miller - Hire charges Hrs 2.00
BASIC COST per 10 sqm
BLD-CSTN-6-12
64 20 mm thick rough cast exterior cement plaster on walls
upto height of 10 metres above ground level consisting of
10 mm thick backing coat of 1 : 3 cement mortar (1 cement
: 3 sand) and 10 mm thick finishing coat of 1 : 3 cement
mortar (1 cement : 3 coarse aggregate of size 6 mm to 10
mm) including arrises, chamfers and/or rounded angles not
exceeding 80 mm in girth.
Details of cost for 10 sq.m
Materials :-
Cement mortar 1:3 (1 cement: 3 sand) cum 0.110
Cement mortar 1:3(1 cement: 3 coarse aggregate of
size 6 mm to 10 mm)
Cement kg 52.800
Coarse aggregate of size 6 mm -10 mm cum 0.110
Mazdoo (unskilled) for mixing mortar with coarse
aggreagate 6 - 10 mm
day 0.020
Labour for backing coat and finishing coat -
Plaster work :
Mason, llnd class day 1.710
Mazdoo (unskilled) day 3.270
Extra labour for scooping :
Mason, llnd class day 0.250
Mazdoor (male) day 0.250
Add for water charges @ 1 %
Cost for 10 sq.m.
Cost per sq.m
RCM facia 5cm thick in CM (1:3) for drop walls, fins with
rabbit wire mesh & nominal reinforcement as directed by
Engineer-in-charge with dubara sponge finishing, including
cost & conveyance of all materials to site, seigniorage
charges, sales & other taxes on all materials, operational &
incidental, cost and conveyance of cement, wire mesh, water
to work site, centering, scaffolding and form work, lift
charges etc., complete for finished items of work but
excluding cost of steel & its fabrication charges, for finished
item of work. (APSS No.403 & 903)
RCM FACIA WORKS
Note : When Mortar mix is changed proportionate quantity of
cement has to be substituted
682
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-6-13
65 Rough cast exterior cement plaster on walls upto a
height of 10 metres above ground level with a
mixture of sand and gravel or crushed stone graded
from 6 mm to 10 mm nominal size dashed over and
including fresh plaster in two coats, backing coat 10
mm cement plaster 1 : 3 (1 cemen" : 3 sand) and
finishing coat 10 mm cement plaster with cement
mortar 1:3 (1 cement: 3 sand) mixed with 10% finely
grounded hydrated lime by volume of cement
including arrises, chamfers and/or rounded angles
not exceeding 80 mm in girth.
(a) Natural cement finish using ordinary cement.
Details of cost for 10 sq.m.
Materials :
Cement mortar 1:3 (1 cement: 3 sand) cum 0.224
Sand and gravel or crushed stone graded from 6
mm to 10 mm nominal size
Coarse aggregate of size 6 mm -10 mm cum 0.100
Carriage
Grounded hydrated lime kg 9.280
Carriage
Labour for backing coat and finishing coat -
Plaster work :
Mason, llnd class day 1.710
Mazdoo (unskilled) day 3.270
Add labour for dashing crushed stone
Mason 1st class day 0.500
Mazdoo (unskilled) day 1.000
Add for water charges @ 1 %
Cost for 10 sq.m.
Cost per sq.m
(b) Dark coloured finish using ordinary cement
and pigment
Details of cost for 10 sq.m.
Same rate as per (a) above item ()
Add cost of colour kg 6.000
Add for water charges @ 1 %
Add for contractor's profit and overheads
Cost for 10 sq.m.
Cost per sq.m
(c) Light coloured finish using white cement
and pigment
Details of cost for 10 sq.m.
Same rate as per (a) above item ()
Add cost of light colour kg 6.000
Add for water charges on cost of colour @ 1 %
Add for contractor's profit and overheads on cost of
colour and water charges
Cost for 10 sq.m.
Cost per sq.m
683
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-6-14
66 Pebble dash exterior plaster on walls upto a height of 10
metres above ground level with a mixture of washed
pebble or crushed stone graded from 6 mm to 12 mm
nominal size dashed over and including fresh cement
plaster in two coats, backing coat 10 mm cement plaster 1 :
3 (1 cement : 3 sand) and finishing coat 10 mm cement
plaster 1 : 3 (1 cement : 3 sand) mixed with 10% finely
grounded hydrated lime by volume of cement including
arrises, chamfers and/or rounded angles not exceeding 80
mm in girth
Details of cost for 10 sq.m
Materials :
Cement mortar 1:3 cum 0.224
Grounded hydrated lime kg 9.280
Pebbles or crushed stone graded from 6 mm to 12
mm nominal size
Crushed stone / Pebble of size 6 mm -12 mm cum 0.100
Labour for backing coat and finishing coat :-
Mason llnd class day 1.710
Mazdoor (unskilled) day 3.270
Labour for pebble dashing
Mason llnd class day 0.500
Mazdoor (unskilled) day 0.610
Add for water charges @ 1 %
Cost for 10 sq.m.
Cost per sq.m
Plain Cement Mortar Bands :
BLD-CSTN-6-15
67 20 mm thick plain cement mortar bands in cement
mortar 1 : 4 (1cement : 4 sand) upto 300 mm in
width
(a) Flush Band :-
Details of cost for 10 metres long and 10 cm wide
band
Materials :-
Cement mortar 1 :4 cum 0.023
Labour :
Mason llnd class day 0.300
Mazdoor (unskilled) day 0.350
Add for water charges @ 1 %
Cost for 10 metres long and 10 cm wide band
Cost per cm width x metre long
b) Sunk band :-
Details of cost for 10 metres long and 10 cm wide
band
Materials :-
Cement mortar 1 :4 cum 0.023
Labour :
Mason llnd class day 0.300
Mazdoor (unskilled) day 0.350
Add for water charges @ 1 %
Cost for 10 metres long and 10 cm wide band
Cost per cm width x metre long
C) Raised Band :-
Materials :-
Cement mortar 1 :4 cum 0.023
Labour :
Mason llnd class day 0.380
Mazdoor (unskilled) day 0.430
Add for water charges @ 1 %
Cost for 10 metres long and 10 cm wide band
Cost per cm width x metre long
684
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-6-16
68 20 mm thick plain cement mortar bands in cement
mortar 1:4(1 cement: 4 sand) above 300 mm in
width
(A) Flush Band :-
Details of cost for 10 sq.m
Materials :-
Cement mortar 1 :4 cum 0.224
Labour :
Mason llnd class day 2.200
Mazdoor (unskilled) day 2.700
Add for water charges @ 1 %
Cost for 10 sq.m.
Cost per sq.m
(B) Sunk band :-
Details of cost for 10 sq.m
Materials :-
Cement mortar 1 :4 cum 0.224
Labour :
Mason llnd class day 2.500
Mazdoor (unskilled) day 3.000
Add for water charges @ 1 %
Cost for 10 sq.m.
Cost per sq.m
(C) Raised band
Details of cost for 10 sq.m
Materials :-
Cement mortar 1 :4 cum 0.224
Labour :
Mason llnd class day 3.000
Mazdoor (unskilled) day 3.500
Add for water charges @ 1 %
Cost for 10 sq.m.
Cost per sq.m
Moulded Cement Mortar Bands 15 mm
BLD-CSTN-6-17
69 15 mm thick moulded cement mortar band in
cement mortar 1 : 4 (1cement: 4 sand)
Details of cost for 10 metres long and 10 cm wide
band
Materials :-
Cement mortar 1 :4 cum 0.023
Labour :
Mason llnd class day 0.870
Mazdoor (unskilled) day 0.920
Add for water charges @ 1 %
Cost for 10 metres long and 10 cm wide band
Cost per cm width x metre long
BLD-CSTN-6-18
70 Masonry work in CM (1:8) prop with Flyash
Cement solid blocks of size 290 x 225 x 140 mm
for manufacturing of flyash solid blocks using
flyash of 80 kgs, cement of 15 kgs. Gypsum of 5
kgs. and stone dust including cost and
conveyance of all materials, labour charges,
seiniorage charges, scaffolding and curing etc.,
cpomplete with a compresive streangth not
lessthan 50 kg/sqm for walls for Superstructure
Walls.
Ground Floor
Unit = 1 cum
A. MATERIALS:
No of blocks required for one cum of Masonry day 110.000
Cost of Cement Mortar (1:6) cum 0.100
B. LABOUR
Mason 1st class day 0.420
685
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Mason 2nd class day 0.920
Man Mazdoor day 0.700
Woman Mazdoor day 2.100
Total
BLD-CSTN-7 FLOORING
BLD-CSTN-7-1
71 Flooring with 25mm thick polished shabad
stones set over base coat of CM (1:8) over
already laid CC bed / RCC Roof Slab, including
neat cement slurry of honey like consistency
spread @ 3.3 kgs per sqm. & Jointed with neat
cement to full depth including cost of all
materials like cement, sand, and water and
flooring stones etc., complete, including
seigniorage charges, labour charges for
dressing of flooring stones etc., complete for
finished item of work, but excluding the cost of
conveyance of all materials.
Unit = 10 sqm
A. MATERIALS:
Polished Shabad Stone (White) (0.457 x 0.457m)
SSR item No. (36)
sqm 11.00
Cement for CM (1:8) proportion for base coat kg. 21.60
Cement for slurry kg. 33.00
Cement for jointing kg. 20.00
Sand for CM (1:8) proportion cum 0.12
Seigniorage charges of sand cum 0.12
B. LABOUR:
Mason 1
st
class
day 3.10
Mason 2
nd
class
day 1.10
Mazdoor (unskilled) day 0.86
Add water charges 1%
Grand Total
BLD-CSTN-7-2
72 Flooring with 40 mm thick Rough
Cuddapah/Shabad stones, set over base coat of
cement mortar (1 : 8) 12 mm thick over CC bed
already laid or RCC roof slab, including pointing
with cement mortar 1:3 duly filling joints nearly,
including cost of all materials like flooring
stone, cement, sand, and water etc., complete,
including seigniorage charges, labour charges
for dressing of flooring stones etc., complete for
finished item of work, but excluding the cost of
conveyance of all materials.
Unit = 10 sqm
A. MATERIALS:
Rough Cuddapah/Shabad stones (40 mm thick)
(0.457 x 0.457 m)
sqm 10.50
Cement for CM (1:8) proportion for base coat kg. 21.60
Cement for CM 1:3 proportion for pointing kg. 9.60
Sand for CM (1:8) proportion cum 0.12
Sand for CM (1:3) proportion cum 0.02
Seigniorage charges of sand cum 0.14
B. LABOUR:
Mason 1
st
class
day 0.960
Mason 2
nd
class
day 2.240
Mazdoor (unskilled) day 3.30
Add water charges 1%
Grand Total
686
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-3
73 Flooring with polished marble slab 20 mm thick
set over base coat of cement mortar (1:6) 20 mm
thick (joints of stone must be flushed) over CC
bed already laid or RCC roof slab, including near
cement slurry of honey like consistency spread
@3.30 kgs per sqm. Jointed with neat cement to
full depth mixed with pigment of matching
shade, including cost of all materials like
flooring slab, cement, sand, and water etc.,
complete, including seigniorage charges, labour
charges for dressing, rubbing and polishing of
flooring stones etc., complete for finished item
of work, but excluding the cost of conveyance of
all materials.
Unit = 10 sqm
A. MATERIALS:
Marble slab of size 0.305 M x 0.305 M sqm 10.10
Cement for CM (1:6) proportion for base coat kg. 48.00
Cement for slurry for bedding kg. 33.00
White Cement for pointing kg. 5.00
Sand for CM (1:6) cum 0.20
Seigniorage charges of sand cum 0.20
B. Machinery
Machine for rubbing of floor day 1.00
C. LABOUR:
Mason 1
st
class
day 2.10
Mason 2
nd
class
day 3.00
Mazdoor (unskilled) day 5.00
Add water charges 1%
Grand Total
BLD-CSTN-7-4
74 Flooring with chequrred terrazzo tiles of 22 mm thick
(medium shade) set over base coat of cement mortar
(1:6) 12 mm thick over CC bed already laid or RCC roof
slab, including near cement slurry of honey like
consistency spread @ 3.3.kgs per sqm & jointed with
neat cement to full depth mixed with pigment of
matching shade including cost of all materials like
cement, sand water and tiles etc., complete, including
seigniorage charges, complete for finished item of
work, but excluding the cost of conveyance of all
materials.
Unit = 10 sqm
A. MATERIALS:
Chequerred terrazzo tiles of 22 mm thick (medium
shade)
sqm 10.05
Cement for CM (1:6) proportion for base coat kg. 28.80
Cement for slurry kg. 33.00
Cement for jointing & pointing kg. 6.00
Pigment kg.
Sand for CM (1:6) proportion cum 0.12
Seigniorage charges of sand cum 0.12
B. MACHINERY
Nill
C. LABOUR
Mason 2
nd
class
day 0.960
Man mazdoor day 2.240
Mazdoor (unskiled) day 3.30
Add water charges 1%
Grand Total
687
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-5
75
Flooring with vitrified tiles of 1
st
quality, set over
base coat of cement mortar (1:8), 12 mm thick
over CC bed already laid or RCC roof slab,
including neat cement slurry of honey like
consistency spread @ 3.3.kgs per sqm & jointed
neatly with white cement paste to full depth
mixed with pigment of matching shade,
including cost of all materials like cement, sand
water and tiles etc., complete, including
seigniorage charges, etc., complete for finished
item of work, but excluding the cost of
conveyance of all materials.
Unit = 10 sqm
A. MATERIALS:
Vitrified tiles of 1
st
quality of size
sqm 10.10
Cement for CM (1:8) for base coat kg. 21.60
Cement for slurry kg. 33.00
Cement for Pointing with CM (1:3) kg. 6.000
Sand for CM (1:8) cum 0.12
Sand for pointing cum 0.020
Seigniorage charges of sand cum 0.140
B. LABOUR
Mason 1
st
class
day 0.96
Mason 2
nd
class
day 2.24
Mazdoor (unskiled) day 3.30
Add water charges 1% 1.00%
Grand Total
BLD-CSTN-7-6
76 Flooring with ceramic tiles, set over base coat of
cement mortar (1:8), 12 mm thick over CC bed
already laid or RCC roof slab, including neat
cement slurry of honey like consistency spread
@ 3.3.kgs per sqm & jointed neatly with white
cement paste to full depth mixed with pigment
of matching shade, including cost of all
materials like cement, sand water and tiles etc.,
complete, including seigniorage charges, etc.,
complete for finished item of work, but
excluding the cost of conveyance of all
materials.
Unit = 10 sqm
A. MATERIALS:
Ceramic tiles sqm 10.10
Cement for CM (1:8) for base coat kg. 21.60
Cement for slurry kg. 33.00
White cement kg. 2.00
Sand for CM (1:8) cum 0.12
Seigniorage charges of sand cum 0.12
B. LABOUR
Mason 1
st
class
day 0.96
Mason 2
nd
class
day 2.24
Mazdoor (unskiled) day 3.30
Add water charges 1% 1.00%
Grand Total
688
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-7
77 Flooring with high polished granite 16 to 18 mm
mm thick slabs other than black set over base
coat of cement mortar (1:8), 20 mm thick over
CC bed already laid or RCC roof slab, including
neat cement slurry of honey like consistency
spread @ 3.3.kgs per sqm & jointed neatly with
white cement paste mixed with pigment of
matching shade to full depth, including cost of
all materials like cement, sand water and
tilesetc., complete, including seigniorage
charges, labour charges for dressing of tilesetc.,
complete for finished item of work, but
excluding the cost of conveyance of all
materials
Unit = 10 sqm
A. MATERIALS:
High polished granite 16 to 18 mm thick slab other
than black
sqm 10.10
Cement for CM (1:8) for base coat kg. 36.00
Cement for slurry kg. 33.00
White cement for jointing & pointing kg. 6.00
Cement for jointing kg.
Sand for CM (1:8) cum 0.20
Seigniorage charges of sand cum 0.20
B. LABOUR
Mason 1
st
class
day 3.00
Mason 2
nd
class
day 1.00
Mazdoor (unskiled) day 8.00
Add water charges 1% 1.00%
Grand Total
BLD-CSTN-7-8
78 Flooring with marble tiles polished 8 mm thick set over
base coat of cement mortar (1:8), 12 mm thick over CC
bed already laid or RCC roof slab, including neat
cement slurry of honey like consistency spread @
3.3.kgs per sqm & jointed neatly with white cement
paste mixed with pigment of matching shade to full
depth, including cost of all materials like cement, sand
water and tiles etc., complete, including seigniorage
charges, etc., complete for finished item of work, but
excluding the cost of conveyance of all materials
Unit = 10 sqm
A. MATERIALS:
Marble tiles polished 8 mm thick sqm 10.10
Cement for CM (1:8) for base coat kg. 36.00
Cement for slurry kg. 33.00
White cement for jointing & pointing kg. 5.00
Sand for CM (1:8) cum 0.20
Seigniorage charges of sand cum 0.20
B. LABOUR (including for polishing & rubbing)
Mason 1
st
class
day 4.00
Mazdoor (unskiled) day 8.00
Add water charges 1% 1.00%
Grand Total
689
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-9
79 Flooring with granite stone tiles 8 mm thick
(mirror polished of all shades) set over base
coat of cement mortar (1:6), 12 mm thick over
CC bed already laid or RCC roof slab, including
neat cement slurry of honey like consistency
spread @ 3.3.kgs per sqm & jointed neatly with
white cement paste mixed with pigment of
matching shade to full depth, including cost of
all materials like cement, sand water and tiles
etc., complete, including seigniorage charges,
etc., complete for finished item of work, but
excluding the cost of conveyance of all
materials.
Unit = 10 sqm
A. MATERIALS:
Granite stone tiles 8 mm thick (mirror polished of all
shades)
sqm 10.10
Cement for CM (1:6) for base coat kg. 48.00
Sand for CM (1:6) cum 0.20
Seigniorage charges of sand cum 0.20
B. LABOUR
Mason 1
st
class
day 4.00
Mazdoor (unskiled) day 8.00
Add water charges 1% 1.00%
Grand Total
BLD-CSTN-7-10
80 Flooring with decorated white back ground
glazed tiles, set over base coat of cement mortar
(1:6), 12 mm thick over CC bed already laid or
RCC roof slab, including neat cement slurry of
honey like consistency spread @ 3.3.kgs per
sqm & jointed neatly with white cement paste
mixed with pigment of matching shade to full
depth, including cost of all materials like
cement, sand water and tiles etc., complete,
including seigniorage charges, etc., complete
for finished item of work, but excluding the cost
of conveyance of all materials
Unit = 10 sqm
A. MATERIALS:
Decorated white back ground glazed tiles sqm 10.10
Cement for CM (1:6) for base coat kg. 28.80
Cement for slurry kg. 33.00
White cement for jointing & pointing kg. 6.00
Sand for CM (1:6) cum 0.12
Seigniorage charges of sand cum 0.12
B. LABOUR
Mason 1
st
class
day 0.96
Mason 2
nd
class
day 2.24
Mazdoor (unskiled) day 3.30
Add water charges 1% 1.00%
Grand Total
690
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-11
81 Flooring with pressed clay flooring tiles, set
over base coat of cement mortar (1:8) 12 mm
thick over CC bed already laid or RCC roof slab,
including neat cement slurry of honey like
consistency spread @ 3.3.kgs per sqm & jointed
neatly with cement mixed with pigment of
matching shade to full depth, including cost of
all materials like cement, sand water and tiles
etc., complete, including seigniorage charges,
etc., complete for finished item of work, but
excluding the cost of conveyance of all
materials
Unit = 10 sqm
A. MATERIALS:
20 X 20 cm pressed clay flooring tiles 1000
Nos
0.255
Cement for CM (1:8) for base coat kg. 21.600
Cement for jointing & pointing kg. 6.000
Pointing with CM (1:3) 10sqm 1.000
Deduct CM (1:3) cum 0.040
Sand for CM (1:8) cum 0.120
Seigniorage charges of sand cum 0.120
B. LABOUR
Mason 1
st
class
day 0.960
Mason 2
nd
class
day 2.240
Mazdoor (unskiled) day 4.30
Add water charges 1% 1.00%
Grand Total
BLD-CSTN-7-12
82 Flooring with Plain Cement tiles, set over base
coat of cement mortar (1:8) 12 mm thick over
CC bed already laid or RCC roof slab, including
neat cement slurry of honey like consistency
spread @ 3.3.kgs per sqm & jointed neatly with
cement paste mixed with pigment of matching
shade to full depth, including cost of all
materials like cement, sand water and tiles etc.,
complete, including seigniorage charges, etc.,
complete for finished item of work, but
excluding the cost of conveyance of all
materials
Unit = 10 sqm
A. MATERIALS:
Plain cement Tiles 20 x 20 cms 1000
Nos
0.255
Cement for CM (1:8) for base coat kg. 21.600
Cement for jointing & pointing kg. 6.000
Pointing with CM (1:3) 10sqm 1.000
Deduct CM (1:3) cum 0.040
Sand for CM (1:8) cum 0.120
Seigniorage charges of sand cum 0.120
B. LABOUR
Mason 1
st
class
day 0.960
Mason 2
nd
class
day 2.240
Mazdoor (unskiled) day 3.30
Add water charges 1% 1.00%
Grand Total
691
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-13
83 Gronolithie Concrete Flooring 20 mm thick with
(1:1:2), using 6mm to 12 mm size hard granite
machine crushed metal laid over CC bed already
laid or RCC roof slab, in alternate panels of size
not exceeding 1.50 m x 1.50 m and finishing the
top surface to required smoothness and slopes
and thread lining including cost of all materials
like cement, metal, sand and water etc.,
complete, including seigniorage charges, etc.,
complete for finished item of work, but
excluding the cost of conveyance of all
materials
Unit = 10 sqm
A. MATERIALS:
6mm to 12 mm H.G. Metal (Machine crushed) cum 0.17
Cement kg 120.00
Sand cum 0.085
Seigniorage charges of sand cum 0.085
B. LABOUR
Mason 1
st
class
day 1.25
Mason 2
nd
class
day 0.06
Mazdoor (unskiled) day 3.00
Add water charges 1% 1.00%
Grand Total
BLD-CSTN-7-14
84 Flooring with 100mm thick Cement Concrete 1:6:10,
using 40mm metal, 100mm thick and 20 mm Cement
Concrete surface (Ellis Pattern, 1st Sort)
Unit = 10 sqm
A. MATERIALS:
Cement Concrete 1:6:10 using concrete mixer cum 1.000
Stone Chippings 3.34 mm - 10 mm cum 0.250
Cement kg 120.000
B. LABOUR
Mason 1
st
class
day 0.150
Mason 2
nd
class
day 0.350
Mazdoor (unskiled) day 5.40
Add water charges 1% 1.00%
Grand Total
BLD-CSTN-7-15
85 Flooring with Cement Concrete 1:6:10, using
40mm metal, 100mm thick and plastered over
with 12 mm thick in CM(1:3)
Unit = 10 sqm
A. MATERIALS:
Cement Concrete 1:6:10 using concrete mixer cum 1.00
Plastering with CM (1:3), 12 mm thick 10 sqm 1.00
Grand Total
BLD-CSTN-7-16
86 Flooring with Cement Concrete 1:6:10, using
40mm metal, 100mm thick and plastered over
with 12 mm thick in CM(1:3) using Red oxid,
with polished surface
Unit = 10 sqm
A. MATERIALS:
Cement Concrete 1:6:10 using concrete mixer cum 1.00
Plastering with CM (1:3), 12 mm thick 10 sqm 1.00
Red oxid kg 10.00
Note : When Mortar mix is changed proportionate quantity
of cement has to be substituted for all above Flooring Items.
The same data holds good for stones with all colours. Adopt
same data for polished Kadapa Stones and Bethamcherla
stones.
692
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
B. LABOUR
Masons for polishing Nos 1.10
Grand Total
BLD-CSTN-7-17
87 6 mm thick terrazzo flooring in situ with white,
black, chocolate, gray, yellow or green superior
marble chips, over 20 mm thick base coat of CM
(1:3) laid over CC bed already laid or RCC roof
slab, including cost of all materials like cement
marble powder, marble chips, sand & water etc.,
complete including polishing to get high smooth
finishing, seigniorage charges, etc., complete
for finished item of work, but excluding the cost
of conveyance of all materials
Unit = 10 sqm
A. MATERIALS:
Marble Powder kg 17.000
Marble Chips cum 0.060
Cement for top layer kg. 50.000
Cement for base coat in CM (1:3) kg. 96.000
Sand for base coat cum 0.200
Seigniorage charges of sand cum 0.200
B. MACHINERY
Polishing Charges sqm 10.000
C. LABOUR
Mason 1
st
class
day 0.960
Mason 2
nd
class
day 2.240
Mazdoor (unskiled) day 3.30
Grand Total
BLD-CSTN-7-18
88 Providing skirting to internal walls to 15 cm
height/risers of steps with ceramic tiles 7.30 mm
thick length equal to flooring stones, set over
base coat of CM (1:3) 12 mm thick with cement
slurry of honey like consistency spread at the
rate of 3.30 kgs per sqm and jointed with white
cement paste mixed with pigment of matching
shade to full depth, including cost of all
materials like tiles, cement, sand and water etc.,
complete including seigniorage charges, etc.,
complete for finished item of work, but
excluding the cost of conveyance of all
materials
Unit = 10 sqm
A. MATERIALS:
Ceramic tiles 7.30 mm thick sqm 10.00
Sand for cm 1:3 base coat cum 0.12
Cement for cm 1:3 base coat kgs 57.60
Cement for slurry kgs 33.00
White cement for jointing & pointing kgs 6.00
Seigniorage charges of sand cum 0.12
B. LABOUR
Mason 1
st
class
day 0.77
Mazdoor (unskiled) day 0.80
Grand Total
693
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-19
89 Providing skirting to internal walls to 15 cm
height/risers of steps with marble slab..mm
thickness, length equal to flooring stones, set
over base coat of CM (1:3) 12 mm thick with
cement slurry of honey like consistency spread
at the rate of 3.30 kgs per sqm and jointed with
white cement paste mixed with pigment of
matching shade to full depth, including cost of
all materials like marble slab, cement, sand and
water etc., complete including seigniorage
charges, etc., complete for finished item of
work, but excluding the cost of conveyance of
all materials
Unit = 10 sqm
A. MATERIALS:
Marble slabmm thickness sqm 10.10
Sand for base coat cum 0.12
Cement for base coat kg 57.60
Cement for slurry kg 33.00
White cement for jointing & pointing kg 5.00
Flate nosing charges RM 66.67
Machine cutting charges RM 67.67
Seigniorage charges of sand cum 0.12
B. LABOUR
Mason Ist class day 2.10
Man mazdoor (Beldar) day 4.90
Man mazdoor (Beldar) for polishing & rubbing day 4.00
Woman mazdoor day 4.00
Grand Total
BLD-CSTN-7-20
90 Providing skirting to internal walls to 15 cm
height/risers of steps with vitrified tiles length
equal to flooring stones, set over base coat of
CM (1:5) 12 mm thick with cement slurry of
honey like consistency spread at the rate of 3.30
kgs per sqm and jointed with white cement
paste mixed with pigment of matching shade to
full depth, including cost of all materials like
tiles, cement, sand and water etc., complete
including seigniorage charges, etc., complete
for finished item of work, but excluding the cost
of conveyance of all materials
Unit = 10 sqm
A. MATERIALS:
Vitrified tiles polished 1st quality sqm 10.10
Sand for cm 1:5 base coat cum 0.12
Cement for cm 1:5 base coat kgs 34.56
Cement for slurry kgs 33.00
White cement for jointing & pointing kgs 2.00
Seigniorage charges of sand cum 0.12
B. LABOUR
Mason Ist class day 0.96
Mason 2
nd
class
day 2.24
Mazdoor (unskilled) day 3.30
Add water charges 1% 1.00%
Grand Total
694
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-21
91 Providing skirting to internal walls to 15 cm
height/risers of steps with 8 mm thick mirror
polished granite tiles length equal to flooring
stones, set over base coat of CM (1:3) 12 mm
thick with cement slurry of honey like
consistency spread at the rate of 3.30 kgs per
sqm and jointed with white cement paste mixed
with pigment of matching shade to full depth,
including cost of all materials like tiles, cement,
sand and water etc., complete including
seigniorage charges, etc., complete for finished
item of work, but excluding the cost of
conveyance of all materials
Unit = 10 sqm
A. MATERIALS:
8 mm thick mirror polished granite tiles sqm 10.10
Sand for cm 1:3 base coat cum 0.12
Cement for cm 1:3 base coat kgs 57.60
Cement for slurry kgs 33.00
White cement for jointing & pointing kgs 5.00
Seigniorage charges of sand cum 0.12
B. LABOUR
Mason Ist class day 2.10
Mazdoor (unskiled) day 0.80
Mason 2
nd
class
4.90
Add water charges 1% 1.00%
Grand Total
BLD-CSTN-7-22
92 Providing skirting to internal walls to 15 cm
height/risers of steps with 25 mm thick polished
Cuddapah stone length equal to flooring stones,
set over base coat of CM (1:3) 12 mm thick with
cement slurry of honey like consistency spread
at the rate of 3.30 kgs per sqm and jointed with
white cement paste mixed with pigment of
matching shade to full depth, including cost of
all materials like Cuddapah stone, cement, sand
and water etc., complete including seigniorage
charges, etc., complete for finished item of
work, but excluding the cost of conveyance of all
materials
Unit = 10 sqm
A. MATERIALS:
25 mm thick polished Cuddapah stone sqm 10.10
Sand for cm 1:3 base coat cum 0.12
Cement for cm 1:3 base coat kgs 57.60
Cement for slurry kgs 33.00
Seigniorage charges of sand cum 0.12
B. LABOUR
Mason Ist class day 0.96
Mason 2nd class day 2.24
Mazdoor (unskiled) day 3.10
Add water charges 1% 1.00%
Grand Total
695
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-23
93 Providing skirting to internal walls to 15 cm
height/risers of steps with 25 mm thick polished
Shahabad stone length equal to flooring stones,
set over base coat of CM (1:3) 12 mm thick with
cement slurry of honey like consistency spread
at the rate of 3.30 kgs per sqm and jointed with
white cement paste mixed with pigment of
matching shade to full depth, including cost of
all materials like Shahabad stone, cement, sand
and water etc., complete including seigniorage
charges, etc., complete for finished item of
work, but excluding the cost of conveyance of all
materials
Unit = 10 sqm
A. MATERIALS:
25 mm thick polished Shahabad stone (White) sqm 10.10
Sand for cm 1:3 base coat cum 0.12
Cement for cm 1:3 base coat kgs 57.60
Cement for slurry kgs 33.00
Seigniorage charges of sand cum 0.12
B. LABOUR
Mason Ist class day 0.96
Mason 2nd class 2.24
Mazdoor (unskiled) day 3.10
Add water charges 1% 1.00%
Grand Total
BLD-CSTN-7-24
94 Teak Wood Flooring 40mm. Thick Tongued and
Grooved Planks, including cost of all materials,
labour etc., complete
Unit = 10 sqm
A. MATERIALS:
Teak Wood Planks 40mm thick cum 0.44
75 mm Long Screws 100 Nos 3.00
B. LABOUR
Carpenters 1st Class day 1.95
Carpenters 2nd Class day 4.55
Man mazdoor day 5.40
Grand Total
Note : Deduct 4.3 Nos Carpenters if plank rate is for tongued
and grooved ready planned.
Note : When Mortar mix is changed proportionate quantity of
cement has to be substituted for all Skirting Items.
696
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-7-25
95 Flooring with Gravel 150 mm thick including
cost of all materials, labour, watering etc.,
complete
Unit = 10 sqm
A. MATERIALS:
Gravel (including 2% wastage) cum 1.53
B. LABOUR
Man mazdoor day 1.10
Woman mazdoor day 0.50
Grand Total
BLD-CSTN-8 ROOFING & CEILING
BLD-CSTN-8-1
96 Roofing with corrugated G.I sheets 0.80mm
thick fixed with G.I J bolts & nuts 8 mm dia
with bitumen & G.I limpet washers filled with
white lead & including a coat of approved steel
primer and two coats of approved paint on over
lapping of sheets complete (up to a pitch of 60
0
)
and seigniorage charges, etc., complete,
excluding the cost of purlins, rafters, trusses &
cost of conveyance of all materials
Unit = 184.518 sqm
A. MATERIALS:
G.I corrugated 0.80 mm thick sheets kgs 103.09
G.I scam bolts & nuts 2 x 27 (laps) x 17 = 884 nos 47.91
G.I bolts & nuts 20 x 6 nos
G.I J bolts 8 mm dia 2 x 5 x 27 sheets x 3 nos =
810 nos. with washers or srews, if wooden battens
used.
nos 43.90
Limpet washers (for scam & J bolts) 884 +
810 = 1694
nos 91.82
Bitumen washers nos 91.82
Zinc cromate yellow paint litre 0.14
Ready mixed paint litre 0.20
B. LABOUR
For roofing
Carpenter II class day 0.84
Man mazdoor (beldar) day 0.91
For premier painting one coat
Painter day 0.06
Mazdoor (coolie) day 0.06
For two coats of painting to over laps
Painter day 0.14
Mazdor (coolie) day 0.14
Sundries including 50 x 6 mm iron wind ties white lead etc. LS
Add for Standard specification 1mm. Thick ridging and 1.25
mm thick sheet vallyes when such are required for a
particular work. Average allowance for 10 sqm roofing.
LS
Grand Total
Rate per 10 sqm = Grand Total/10
697
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-8-2
97 Roofing with corrugated G.I sheets 1.00mm
thick fixed with G.I J bolts & nuts 8 mm dia
with bitumen & G.I limpet washers filled with
white lead & including a coat of approved steel
primer and two coats of approved paint on over
lapping of sheets complete (upto a pitch of 60
0
)
and seigniorage charges, turnover tax etc.,
complete, excluding the cost of purlins, rafters,
trusses & cost of conveyance of all materials
Unit = 184.518 sqm
A. MATERIALS:
G.I corrugated 1.00 mm thick sheets kgs 126.07
G.I scam bolts & nuts 2 x 27 (laps) x 17 = 884 nos 47.91
G.I J bolts 8 mm dia 2 x 5 x 27 sheets x 3 nos =
810 nos.
nos 43.90
Limpet washers (for scam & J bolts) 884 +
810 = 1694
nos 91.82
Bitumen washers nos 91.82
Zinc cromate yellow paint litre 0.14
Ready mixed paint litre 0.20
B. LABOUR
For roofing
Carpenter II class day 0.84
Man mazdoor (beldar) day 0.91
For premier painting one coat
Painter day 0.06
Mazdoor (coolie) day 0.06
For two coats of painting to over laps
Painter day 0.14
Mazdor (coolie) day 0.14
Grand Total
Rate per 10 sqm = Grand Total/10
BLD-CSTN-8-3
98 Roofing with corrugated G.I sheets 1.25mm
thick fixed with G.I J bolts & nuts 8 mm dia
with bitumen & G.I limpet washers filled with
white lead & including a coat of approved steel
primer and two coats of approved paint on over
lapping of sheets complete (upto a pitch of 60
0
)
and seigniorage charges, turnover tax etc., complete,
excluding the cost of purlins, rafters, trusses & cost of
conveyance of all materials
Unit = 184.518 sqm
A. MATERIALS:
G.I corrugated 1.25 mm thick sheets kgs 154.80
G.I scam bolts & nuts 2 x 27 (laps) x 17 = 884 nos 47.91
G.I J bolts 8 mm dia 2 x 5 x 27 sheets x 3 nos =
810 nos.
nos 43.90
Limpet washers (for scam & J bolts) 884 + 810
= 1694
nos 91.82
Bitumen washers nos 91.82
Zinc cromate yellow paint litre 0.14
Ready mixed paint litre 0.20
B. LABOUR
For roofing
Carpenter II class day 0.84
Man mazdoor (beldar) day 0.91
For premier painting one coat
Painter day 0.06
Mazdoor (coolie) day 0.06
698
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
For two coats of painting to over laps
Painter day 0.14
Mazdor (coolie) day 0.14
Grand Total
Rate per 10 sqm = Grand Total/10
BLD-CSTN-8-4
99 Roofing with 6 mm thick corrugated asbestos
cement sheets, fixing with G.I J bolts & nuts 8
mm dia G.I plain washers complete including
seigniorage charges etc., complete for finished
item of work, but excluding the cost of purlins,
rafters, trusses & cost of conveyance of all
materials upto 60
0
pitch.
Unit = 216.14 sqm
A. MATERIALS:
6 mm thick corrugated AC sheets T /sqm 0.15
8 mm dia G.I J bolts & nuts nos 22.03
G.I washers nos 22.03
Bitumen washers nos 22.03
B. LABOUR
Carpenter II class day 0.43
Man mazdoor day 0.54
Sundries including 50 x 6 mm iron wind ties white
lead etc.
LS
Add for Standard specification 1mm. Thick ridging
and 1.25 mm thick sheet vallyes when such are
required for a particular work. Average allowance for
10 sqm roofing.
LS
Grand Total
Rate per 10 sqm = Grand Total/10
BLD-CSTN-8-5
100
196
Best Tiled Roofing with Pan tiles over Flat Tiles
and Lime mortar Borders including Teak
Reapers.
Unit = 10 sqm
A. MATERIALS:
Pan Tiles 230 x (140 + 130)/2, 12 mm thick 1000 No 1560
Flat Tiles 150 x 150 x 15 mm 1000 No 470
Teak Reepers 50 x 12 mm 10RM 75.000
Wire Nails 40 mm long kgs 0.500
Lime cum 0.008
Lime Mortar cum 0.300
B. LABOUR
Carpenter day 0.800
Bricklayers day 2.200
Man mazdoor day 1.100
Woman mazdoor day 5.400
Sundries including tarring reepers, extra labour / for
pointing the underside of flat tiles and white washing
the same.
LS LS
Grand Total
Sub Analysis :
Lime Moratar 1:2
lime cum 0.500
Sand cum 1.000
Grinding Lime Mortar cum 1.000
Total
699
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-8-6
101
197
Best Tiled Roofing with Pan tiles and Lime
mortar Borders including Teak Reapers at 100
mm. centres
Unit = 10 sqm
A. MATERIALS:
Pan Tiles 230 x (140 + 130)/2, 12 mm thick 1000 No 1560
Teak Reepers 50 x 12 mm 10RM 107.000
Wire Nails 40 mm long kgs 0.700
Lime Moratar cum 0.120
B. LABOUR
Carpenter day 1.100
Bricklayers day 1.400
Man mazdoor day 1.100
Woman mazdoor day 3.200
Grand Total
BLD-CSTN-8-7
102
198
Best Tiled Roofing with Pan tiles laid on
Bamboo Rafters, Bamboo Reepers and Bamboo
Mats, including Lime mortar Borders
Unit = 10 sqm
A. MATERIALS:
Pan Tiles 230 x (140 + 130)/2, 12 mm thick 1000 No 1560
Bamboo rafters (450 mm apart) 75 to 100 mm dia RM 25
Bamboo reepers, Split 25 mm dia 100 No 150
Bamboo mats 10 sqm 10.500
Lime Moratar for Borders cum 0.120
B. LABOUR
Carpenter day 1.100
Bricklayers day 1.400
Man mazdoor day 1.100
Woman mazdoor day 3.200
Sundries including nails
Grand Total
BLD-CSTN-8-8
103
199
Best Tiled Roofing with Mangalore tiles set in
Lime mortar over Flat Tiles and including Teak
Reepers
Unit = 10 sqm
A. MATERIALS:
Mangalore tiles (vide Stadard Specification) 1000 No 160
Flat Tiles 150 x 150 x 15 mm 1000 No 470
Teak Reepers 50 x 12 mm 10RM 75.000
Wire Nails 40 mm long kgs 0.500
Lime cum 0.008
Lime Moratar cum 0.380
B. LABOUR
Carpenter day 0.800
Bricklayers day 1.600
Man mazdoor day 1.100
Woman mazdoor day 4.300
Sundries including tarring reepers iron wind ties 30 x
3 mm, G.I. Screw, washers etc., and extra labour for
pointing the underside of flat tiles and white washing
the same.
LS LS
Grand Total
700
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-8-9
104
200
Best Tiled Roofing with Mangalore tiles
including Teak Reepers
Unit = 10 sqm
A. MATERIALS:
Mangalore tiles (vide Stadard Specification) 1000 No 160
Teak Reepers 50 x 12 mm 10RM 36.000
Wire Nails 50 mm long kgs 0.500
Lime Moratar cum 0.090
B. LABOUR
Carpenter day 0.500
Bricklayers day 0.500
Man mazdoor day 1.100
Woman mazdoor day 2.200
Grand Total
BLD-CSTN-8-10
105
201
Best Tiled Roofing with Mangalore tiles over
Ceiling Tiles with Air Spaces and including Teak
Reepers
Unit = 10 sqm
A. MATERIALS:
Rate for "Best Mangalore tiled roofing with
Mangalore tiles including teak reeper".
10 sqm 10.000
Add
Terracing tiles 100 No 156
B. LABOUR
Bricklayers day 0.500
Woman mazdoor day 1.100
Grand Total
Common note Applicabable for Items 196 to
201 :-
1. The quantity proposed for Pan Tiles / Mangalore Tiles
includes allowance for cost of special tiles for ridges and
hips.
2. Reepers size is for rafter spacing 600 mm. including
allowance for eves and valleys.
3. Labour including fixing galvanized iron sheeting-cost of
sheeting to be paid separately.
Sub Analysis :
Lime Mortar (1: 1.5) :
Unit = 1 cum
Lime cum 0.670
Fine Sand cum 1.000
Grinding Mortar (Spl Grinding) cum 1.000
Sundries LS
Total
BLD-CSTN-8-11
106 Plastering with Lime Mortar 3 Coats, 25 mm
thick (Sebara Rendering)
Unit = 10 sqm
Lime Mortar (1:2) cum 0.180
Lime Mortar (1:1.5) cum 0.080
Lime cum 0.023
LABOUR
Bricklayers day 3.200
Mazdoor (unskilled) day 6.500
Sundries LS LS
Total
701
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-8-12
107
204
Terrace Roofing with Brick on edge 75 mm.
Concrete 2 Courses of Flat Tiles at Top and
pointing Flat Tiles in Cement Mortar (1:3) and
one coat of Cement Plaster (1:3)
Unit = 10 sqm
A. MATERIALS:
Terracing Bricks 150 x 75 x 25mm 1000 No 2000
Flat Tiles 150 x 150 x 15 mm 100 No 900
Broken brick 20 mm cube cum 0.980
Lime cum 0.380
Lime Moratar cum 0.210
Pointing with cement mortar 1:3 (for rate - vide
relevant schedule item)
10 sqm 1.000
Cement Mortar 1:3 cum 0.240
B. LABOUR
Bricklayers day 4.300
Mazdoor (unskilled) day 6.500
Grand Total
BLD-CSTN-8-13
108
205
Reinforced cement Concrete Roofing 125 mm
thick with CC (M 20) using 20 mm graded metal
and 2 courses of Flat Tiles at Top including
pointing with Cement Mortar (1:3)
Unit = 10 sqm
A. MATERIALS:
Reinforced Concrete Roofing slab 125 mm thick (for rate -
vide relevant schedule item)
10 sqm 10.000
Flat Tiles 150 x 150 x 20 mm 100 No 900
Cement Mortar 1:3 cum 0.260
Pointing with cement mortar 1:3 (for rate - vide
relevant schedule item)
10 sqm 1.000
B. LABOUR
Bricklayers day 2.200
Woman mazdoor day 2.200
Sundries including crude oil LS
Grand Total
Sub Analysis :
RCC (M 20) using 20 mm HG graded metal using
Concrete mixturefor Roofing 125 mm thick
CC (M 20) (Item No. cum 1.250
Centering Charges 10 sqm 1.000
Form Work
Total
BLD-CSTN-8-14
109
206
Reinforced cement Concrete Roofing 140 mm
thick with CC (M 20) using 20 mm graded metal
and 2 courses of Flat Tiles at Top including
Pointing with Cement Mortar (1:3)
Unit = 10 sqm
A. MATERIALS:
Rate of "Reinforced cement Concrete Roofing 125 mm
thick and 2 courses of Flat Tiles at Top including pointing
with Cement Mortar (1:3)"
10 sqm 1.000
Add :
For extra thickness of roofing slab cum 0.150
Grand Total
Note : The quantity proposed for broken brick allows for the
brick powder formed, replacing sand for concrete layers.
702
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-8-15
110
207
Reinforced cement Concrete Roofing 150 mm
thick with CC (M 20) using 20 mm graded metal
and 2 courses of Flat Tiles at Top including
Pointing with Cement Mortar (1:3)
Rate of "Reinforced cement Concrete Roofing 125 mm
thick and 2 courses of Flat Tiles at Top including pointing
with Cement Mortar (1:3)"
10 sqm 1.000
Add :
For extra thickness of roofing slab cum 0.250
Grand Total
BLD-CSTN-8-16
111
207
Reinforced cement Concrete Roofing 100 mm
thick with CC (M 20) using 20 mm graded metal
and 2 courses of Flat Tiles at Top including
Pointing with Cement Mortar (1:3)
Rate of "Reinforced cement Concrete Roofing 125
mm thick and 2 courses of Flat Tiles at Top
including pointing with Cement Mortar (1:3)"
10 sqm 1.000
Deduct :
For Less thickness of roofing slab cum 0.250
Grand Total
BLD-CSTN-8-17
112
207
Reinforced cement Concrete Roofing 100 mm
thick with CC (M 20) using 20 mm graded metal
with Imprevious Coat with 12 mm thick
Plastering in CM (1:3) with 1 kg. of Impermo
Compound or ACCO Proof per Bag of Cement
and laid when slab is Green.
Unit = 10 sqm
Reinforced Concrete Roofing slab 100 mm thick (for
rate - vide relevant schedule item)
10 sqm 1.000
Centering Charges 10 sqm 1.000
Plastering with CM (1:3), 12 mm thick 10 sqm 1.000
Impermo Compound kgs 1.500
Grand Total
Note for Items 204 - 207 :
1. No extra rate will be paid for finishing the bottom
surface of the roofing slab as described in SS No.
"For estimating purpose the extra allowance for
camber concrete, when such is required may be
given under sundries."
703
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-8-18
113
208
Complete Surface Repairs to Leaky Terrace
Roofs with Flat Tiles
Unit = 10 sqm
A. MATERIALS:
Flat Tiles 150 x 150 x 15 mm 1000 No 450
Cement Mortar 1:3 cum 0.110
Pointing with cement mortar 1:3 (for rate - vide
relevant schedule item)
10 sqm 1.000
B. LABOUR
Bricklayers day 1.100
Man Mazdoor day 1.100
Clean removal of lime plaster from terraced roofs
and raking out joints 12 mm deep (for rate - vide
relevant schedule item)
10 sqm 1.000
Sub Analysis :
Mazdoor (unskilled) Day
Mate Day
Sundries including crude oil LS
Grand Total
BLD-CSTN-8-19
114
209
Best Sloping Bengal Terrace with 3 courses of
Flat Tiles at Top including Teak Wood Reepers
Unit = 10 sqm
A. MATERIALS:
Flat Tiles 150 x 150 x 15 mm 1000 No 1350
Lime cum 0.008
Lime Moratar (1:1.5) cum 0.150
Teak Reepers 52 x 12 mm 10 RM 75.000
Wire Nails 40 mm long kgs 0.500
Plastering with lime mortar 3 coats (for rate - vide
relevant schedule item)
10 sqm 1.000
B. LABOUR
Carpenter day 0.800
Bricklayers day 2.200
Woman mazdoor day 2.200
Sundries including tarring reepers LS
Grand Total
Note : 1. Reepers size is for rafter spacing 600 mm.
including allowance for eves and valleys.
2. No extra rate will bepaid for finishing the bottom
surface of the roofing slab as described in SS No.
704
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-8-20
115
212
Removing Old Tiles and Retiling with New Pan
Tiles over Old Teak Reepers including New
White Washed Lime Mortar Borders 230 x 50
mm. at 2 Metres Intervals
Unit = 10 sqm
A. MATERIALS:
Pan Tiles 230 x (140 + 130)/2, 12 mm thick 1000 No 1560
Lime Moratar cum 0.120
B. LABOUR
Bricklayers day 1.400
Man Mazdoor day 1.100
Woman mazdoor day 4.300
Sundries LS
Grand Total
BLD-CSTN-8-21 Shifting Pan Tiles (Labour Only)
Unit = 10 sqm
Bricklayers day 1.100
Man Mazdoor day 0.800
Grand Total
BLD-CSTN-8-22
117
214
Shifting Pan Tilesand forming new White
Washed Lime Mortar Boarders, 230 x 50 mm at 2
Metres Intervals
Unit = 10 sqm
Rate of "Shifting Pan Tiles" 10 sqm 1.000
Add : Lime Mortar Borders and White Washing LS
Grand Total
BLD-CSTN-8-23
118
222
12 mm. Teak Wood Plank Ceiling Tongued and
Grooved Planking
Unit = 10 sqm
A. MATERIALS:
Teak Wood Planks 150 x 12 mm cum 0.132
Screws 40mm long 100 No 300
B. LABOUR
Carpenter day 6.500
Man Mazdoor day 5.400
Sundries LS
Grand Total
Note : Deduct 4.3 Nos Carpenters if plank rate is for
tongued and grooved ready planned.
BLD-CSTN-8-24
119
223
12 mm. Teak Wood Plank Ceiling with 40 x 12
mm Teak Wood Battens
Unit = 10 sqm
Rate for "12 mm. Teak Wood Plank Ceiling
Tongued and Grooved Planking"
10 sqm 10.000
Teak Wood Battens 40 x 12 mm 10 RM 66.000
Brass screws 25 mm long 100 No 240
Deduct :
Carpenter day 1.100
Sundries LS
Grand Total
116
213
705
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-8-25
120 Providing impervious coat to exposed RCC roof
slab surface with CM(1:3), 20mm thick with 1kg
of water proof compound per bag of cement
laid over roof when it is green including cost of
all materials, seigniorage charges, excluding
conveyance charges of materials and including
all operational, incidental and labour charges for
mixing mortar, laying, rendering smooth and
thread lining, curing, rounding off junctions of
wall and slab etc,, complete for finished item of
work
Unit = 10 sqm
A. MATERIALS:
Cement Mortal 1:3 cum 0.210
Water proof compound kg 2.000
B. LABOUR
Mason 1
st
class
day 0.660
Mason 2
nd
class
day 1.540
Mazdoor (unskiled) day 3.70
Grand Total
BLD-CSTN-8-26
121 Providing & fixing insulating board ceiling of
approved quality with nails etc., complete,
excluding the cost of frame work for base and
cost of conveyance of all materials
Unit = 10 sqm
A. MATERIALS:
12 mm thick insulating board sqm 11.00
B. LABOUR
Carpenter Ist class day 2.50
Man mazdoor day 2.00
Grand Total
BLD-CSTN-8-27
122 Providing & fixing hard board sheet ceiling of
approved quality with nails etc., complete,
excluding the cost of frame work for base and
cost of conveyance of all materials
Unit = 10 sqm
A. MATERIALS:
3 mm thick standard quality of hard board sqm 11.00
B. LABOUR
Carpenter Ist class day 2.50
Man mazdoor day 2.00
Grand Total
BLD-CSTN-8-28
123 Providing & fixing flat pressed 3 layer medium
density particle board sheet with necessary
nails etc., complete, excluding the cost of frame
work for base and cost of conveyance of all
materials
Unit = 10 sqm
A. MATERIALS:
Standard quality of flat pressed 3 layer medium density
board sheet 4.50 mm thick
sqm 11.00
B. LABOUR
Carpenter Ist class day 2.50
Man mazdoor day 2.00
Grand Total
706
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-8-29
124 Providing & fixing plain AC sheet ceiling of
approved quality with necessary nails etc.,
complete, excluding the cost of frame work for
base and cost of conveyance of all materials
Unit = 10 sqm
A. MATERIALS:
Plain AC sheet for ceiling sqm 11.00
B. LABOUR
Carpenter Ist class day 2.50
Man mazdoor day 2.00
Grand Total
BLD-CSTN-8-30
125 Providing 10 mm thick plaster of paris (Gypsum
anhydrous) ceiling upto a height of 5 m above
floor level over first class BT wood strips 25 x 6
mm with 10 mm gap in between and reinforced
with rabbit wire mesh fixed to wooden frame
excluding cost of wooden frame for base & cost
of conveyance of all materials.
Unit = 10 sqm
A. MATERIALS:
Wooden strips 1
st
class BT wood 25 x 6 mm size
cum 0.05
Nails kg 0.75
Rabbit wire mesh sqm 10.20
Plaster of paris kg 219.76
B. LABOUR
for Jointing the wooden strips including fixing
the rabbit mesh
Carpenter Ist class day 2.60
Man mazdoor (beldar) day 1.60
For doing plaster of paris over wooden strips
Mason Ist class day 2.62
Mason IInd class day 1.62
Mazdoor (unskilled) day 377.00
Grand Total
Gypboard Suspended false ceiling
BLD-CSTN-8-31
126 Supplying and fixing Gyp Board Suspended regular single
layer false ceiling (GS-MFSC-4.1 as per India Gypsum)
using 12.5 mm thick Gyp Board conforming to IS 2095 -
1982 fixing to Gyp steel GI perimeter channels of size 20
mm x 27 mm x 30 mm(web) of 0.55 mm thick along the
perimeter of ceiling screw fixed to brick work/ partition at
610 mm c/c and suspending the frame work using
Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm)
from soffit at 1220 mm c/c with ceiling angle (25 mm x 10
mm x 0.55 mm) fixed with GI Cleat and steel expansion
fasteners & connecting clip to the ceiling channels (with
knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm)
fixed in direction perpendicular to the intermediate channel
at 457 mm c/c and fixing the 12.5 mm tapered edge
Gypboard with 25 mm drywall screws at 230 mm c/c &
jointing and finishing using joint compound and paper tape
to have a flush look including filling the tapered & square
edges with jointing compound, two coats of drywall topcoat
complete for finished item of work as per Idia Gypsum Ltd
specification.
UNIT -1 sqm
A) Material requirement as per India Gypsum
12.5 mm Gypboard
1219 mm x 1829 mm size Boards sqm 1.03
707
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Ceiling Angle
25 mm x 10 mm x 0.55 mm RM 0.64
Connecting Clips Nos 1.84
Ceiling Section
51.5 mm x 26 mm x 10.5 mm x 0.55 mm thick RM 2.30
Intermediate Channel
45 mmx 15 mm x 15 mm x 0.9 mm RM 0.84
Perimeter Channel
20 mm x 27 mm x 30 mm(web) of 0.55 mm thick RM 0.40
Rawl Plug Nos 0.64
Soffit Cleats Nos 0.64
Drywall Screws - 25 mm Nos 18.00
Jointing Compound Kgs 0.55
Jointing Paper Tape RM 1.46
Drywall Top Coat Lits 0.15
B) LABOUR CHARGES
1st Class Carpenter day 0.40
2nd Class Carpenter day 0.40
1st Class Painter day 0.08
2nd Class Painter day 0.08
Power Saw Cutter - Hand Operated - Operator day 0.04
Power Drill - Hand Operated - Operator day 0.08
Unskilled Mazdoor day 0.24
C) Machinery
Power Saw Cutter - Hand Operated - Hire charges Hrs 0.32
Power Drill - Hand Operated - Hire Charges Hrs 0.64
Scaffolding charges 1%
BASIC COST per 1 sqm
Gyp Board Fine Line Grid false ceiling
BLD-CSTN-8-32
127 Supplying and fixing Gyp Board Fine Line Grid false ceiling
(GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600
mm using 12.5 mm thick/ 9.5 mm thick Gyp Board sheet
tiles of size 595 mm x 595 mm or 595 mm x 1195 mm
conforming to IS 2095 - 1982 fixing to Gyp steel precoated
GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick
along the perimeter of ceiling screw fixed to brick work/
partition at 610 mm c/c and suspending the frame work
using precoated GI Tee section (24 mm x 38 mm x 0.7 mm)
from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl
plugs and steel expansion fasteners & connecting clip to
the GI T section with 4 mm dia GI Rod with galvanised
spring steel level clip of PVC unversal holding clips system
at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard
Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195
mm and finishing two coats of drywall topcoat complete for
finished item of work as per Idia Gypsum Ltd specification.
UNIT -1 sqm
A) Material requirement as per India Gypsum
12.5 mm / 9.5 mm - Gypboard Tiles
Either - 595 mm x 595 mm - sqm 1.00
Or - 595 mm x 1195 mm -
GI Angle - Precoated
25 mm x 25 mm x 0.7 mm RM 0.40
GI - Precoated - T Section - 3600 mm long
24 mm x 38 mm x 0.7 mm thick RM 1.60
GI - Precoated - T Section - 600 mm long
24 mm x 38 mm x 0.7 mm thick RM 1.60
GI Rod - 4 mm Dia
Connecting Rod RM 1.28
Rawl Plug Nos 1.28
Soffit Cleats Nos 1.28
Unversal Holding Clips Nos 5.36
708
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Drywall Top Coat Lits 0.15
B) LABOUR CHARGES
1st Class Carpenter day 0.40
2nd Class Carpenter day 0.40
1st Class Painter day 0.08
2nd Class Painter day 0.08
Power Saw Cutter - Hand Operated - Operator day 0.04
Power Drill - Hand Operated - Operator day 0.04
Unskilled Mazdoor day 0.24
C) Machinery
Power Saw Cutter - Hand Operated - Hire charges Hrs 0.32
Power Drill - Hand Operated - Hire Charges Hrs 0.32
Scaffolding charges 1%
BASIC COST per 1 sqm
Armstrong False ceiling
BLD-CSTN-8-33
128 Providing and fixing in true horizontal level 600 mm x 600
mm 15 mm thick Arm strong false ceiling system
manufactured by M/s Arm strong world Industries using hot
dipped Galvanised Steel section exposed surface with pre-
coated capping, main Tee of size 24 x 32 mm at every
1200 mm c/c maximum and rotary stiched cross tee of size
24 x 27 mm at evry 600 mm c/c and sub-cross tee of size
24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x
19 mm fixed to periphery of the wall and the above grid is
suspended at every 1200 mm c/c in both directions using
2.0 mm thick pre-straightened GI Wire laying fine fissured
butt edge ceiling tiles of 15 mm thick mineral fiber Board
manufactured by M/s Arm Strong World Industries Ltd.,
having RH 99% and for finished of size 600 x 600 mm
including Cost &conveyance of all materials and labour
charges such as cutting , fixing of standing of frame work
exposing roof making complete for finished item of work
UNIT 1 sqm
A) Material requirement
15 mm - Armstrong Mineral Fiber sheet 600 x 600 sqm 1.00
Hotdipped GI Angle - Precoated - Grid
19 mm x 19 mm RM 0.40
Polyster painted GI - T Section - 1200 mm
(1) 24 x 32 mm and (2) 24 x 25 mm (sub-cross Tee) RM 1.60
Polyster painted GI - T Section - 300 mm
24 mm x 27 mm RM 1.60
GI Rod - prestraightened - 2.0 mm dia
Connecting Rod RM 1.28
6 mm Nylon Rawl Plug Nos 1.28
B) LABOUR CHARGES
PER UNIT 1 sqm
1st Class Carpenter day 0.40
2nd Class Carpenter day 0.40
1st Class Painter day 0.08
2nd Class Painter day 0.08
Power Saw Cutter - Hand Operated - Operator day 0.04
Power Drill - Hand Operated - Operator day 0.04
Unskilled Mazdoor day 0.24
C) Machinery
Power Saw Cutter - Hand Operated - Hire charges Hrs 0.32
Power Drill - Hand Operated - Hire Charges Hrs 0.32
Scaffolding charges 1%
BASIC COST per 1 sqm
709
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Thermocole False ceiling
BLD-CSTN-8-34
129 Providing and fixing Thermocole False ceiling in true
horizontal level 600 mm x 600 mm using 15 mm/ 19 mm
thick Thermocole sheet anodised Aluminium Tee sections
of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee
of size 24 x 24.5 mm at every 600 mm c/c and anodised
aluminium wall angle of size 24 x 24 mm fixed to periphery
of the wall and the above grid is suspended at every 1200
mm c/c in both directions using 2.0 mm thick GI Wire for
finished of size 600 x 600 mm including Cost &conveyance
of all materials and labour charges such as cutting , fixing
of standing of frame work exposing roof making complete
for finished item of work
UNIT 1 sqm
A) Material requirement
15 mm/ 19 mm Thermocole sheet 600 x 600 sqm 1.00
Alumninium Angle
24 mm x 24 mm RM 0.40
Anodised Aluminium T Section
(1) 24 x 24.5 x 2.4 mm mm RM 3.20
GI Rod - prestraightened - 2.0 mm dia
Connecting Rod Nos 1.28
Rawl Plugs Nos 1.28
B) LABOUR CHARGES
1st Class Carpenter day 0.36
2nd Class Carpenter day 0.36
1st Class Painter day 0.00
2nd Class Painter day 0.00
Power Saw Cutter - Hand Operated - Operator day 0.02
Power Drill - Hand Operated - Operator day 0.04
Unskilled Mazdoor day 0.20
C) Machinery
Power Saw Cutter - Hand Operated - Hire charges Hrs 0.16
Power Drill - Hand Operated - Hire Charges Hrs 0.32
Scaffolding charges 1%
BASIC COST per 1 sqm
BLD-CSTN-9
WHITE WASHING, COLOUR WASHING &
DISTEMPERING
BLD-CSTN-9-1
130 White washing one coat with lime of approved
quality to give an even shade after thoroughly
brushing the surface to remove all dirt and
remains of loose powdered materials including
cost of all materials, labour charges and
incidental such as scaffolding, lift charges etc.,
complete for finished item of work, but
excluding conveyance charges of materials
Unit: 10 sqm
A. MATERIALS :
Fine screened shell lime cum 0.005
Gum, conjee water, or prickly pear juice including
necessary fire wood
L.S
B. LABOUR
Brick Layers day 0.11
Mazdoor (unskilled) day 0.22
Sundries including brushes etc., LS
Total cost for 10 sqm
710
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-9-2
131 White washing two coats with lime of approved
quality to give an even shade after thoroughly
brushing the surface to remove all dirt and
remains of loose powdered materials including
cost of all materials, labour charges and
incidental such as scaffolding, lift charges etc.,
complete for finished item of work, but
excluding conveyance charges of materials
Unit: 10 sqm
A. MATERIALS :
Fine screened shell lime cum 0.007
Gum, conjee water, or prickly pear juice including
necessary fire wood
L.S
B. LABOUR
Brick Layers day 0.160
Mazdoor (unskilled) day 0.32
Sundries including brushes etc., LS
Total cost for 10 sqm
BLD-CSTN-9-3
132 White washing three coats with lime of
approved quality to give an even shade after
thoroughly brushing the surface to remove all
dirt and remains of loose powdered materials
including cost of all materials, labour charges
and incidental such as scaffolding, lift charges
etc., complete for finished item of work, but
excluding conveyance charges of materials
Unit: 10 sqm
A. MATERIALS :
Fine screened shell lime cum 0.009
Gum, conjee water, or prickly pear juice including
necessary fire wood
L.S
B. LABOUR
White washer day -
Brick Layers day 0.220
Man Mazdoor day -
Women mazdoor day -
Mazdoor (unskilled) day 0.43
Sundries including brushes, ladders etc., LS
Total cost for 10 sqm
BLD-CSTN-9-4
133 White washing one coat with whiting of
approved quality to give an even shade after
thoroughly brushing the surface to remove all
dirt and remains of loose powdered materials
including cost of all materials, labour charges
and incidental such as scaffolding, lift charges
etc., complete for finished item of work, but
excluding conveyance charges of materials
Unit: 10 sqm
A. MATERIALS :
Whiting / White Cement cum / kg 1.20
Gum, conjee water, or prickly pear juice including
necessary fire wood
B. LABOUR
Brick Layers / Painter day 0.11
Mazdoor (unskilled) day 0.22
Sundries including brushes, ladders, etc., 0.50%
Total cost for 10 sqm
with White Cement
Grade II
711
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-9-5
134 White washing two coats with whiting of
approved quality to give an even shade after
thoroughly brushing the surface to remove all
dirt and remains of loose powdered materials
including cost of all materials, labour charges
and incidental such as scaffolding, lift charges
etc., complete for finished item of work, but
excluding conveyance charges of materials
Unit: 10 sqm
A. MATERIALS :
Whiting / White Cement cum / kg 2.00
Gum, conjee water, or prickly pear juice including
necessary fire wood
L.S
B. LABOUR
Brick Layers / Painter day 0.210
Mazdoor (unskilled) day 0.320
Sundries including brushes, ladders, etc., 1.00%
Total cost for 10 sqm
BLD-CSTN-9-6
135 White washing three coats with whiting of
approved quality to give an even shade after
thoroughly brushing the surface to remove all
dirt and remains of loose powdered materials
including cost of all materials, labour charges
and incidental such as scaffolding, lift charges
etc., complete for finished item of work, but
excluding conveyance charges of materials
Unit: 10 sqm
A. MATERIALS :
Whiting / White Cement cum / kg 2.800
Gum, conjee water, or prickly pear juice including
necessary fire wood
B. LABOUR
Brick Layers / Painter day 0.300
Mazdoor (unskilled) day 0.430
Total cost for 10 sqm
BLD-CSTN-9-7 Colour Washing, One Coat
Unit: 10 sqm
Rate for "White Washing" one coat 10 sqm 1.000
Add: For Colours, etc., (50 percent of above rate)
Total
BLD-CSTN-9-8 Colour Washing, Two Coats
Unit: 10 sqm
Rate for "White Washing" two coats 10 sqm 1.000
Add: For Colours, etc., (50 percent of above rate)
Total
BLD-CSTN-9-9
138
256
Distempering, 2 Coats with Water Bound
Distemper
Unit: 10 sqm
A. MATERIALS :
Distemper kg 1.340
B. LABOUR
Painter day 0.500
Mazdoor (unskilled) day 1.300
Sundries including brushes, ladders, etc., 1.000%
Total cost for 10 sqm
136
254
137
255
712
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-9-10
139
257
Distempering, 2 Coats with Oil Bound Distemper
Unit: 10 sqm
A. MATERIALS :
Distemper kg 1.700
B. LABOUR
Painter day 1.200
Sundries including brushes, ladders, etc., 1.000%
Total cost for 10 sqm
BLD-CSTN-10
PAINTING & VARNISHING
BLD-CSTN-10-1
140 Painting to new walls with 2 coats of ready mixed oil
bound wahsable distemper of approved brand and
shade over a base coat of appropriate primer of
approved brand, making 3 coats in all to give an
even shade after thourughly brushing the surface to
remove all dirt and remains of loose powdered
materials, including cost and conveyance of all
materials to work site and all operational, incidental,
labour charges etc. complete for finished item of
work as per SS 911 for internal walls
PRIMARY COAT:
Cost of Primer Lts 0.50
Painter I st class Nos 0.08
Pianter Iind class Nos 0.19
Cost of washable Oil Bound Distemper Lts 1.70
1st class painter Nos 0.36
II class painter Nos 0.84
Total cost
BLD-CSTN-10-2
141
270
Painting, Priming Coat on New Plastered
Surface
Unit: 10 sqm
A. MATERIALS :
Cement Primer kg 1.00
B. LABOUR
Painter day 0.700
Sundries including brushes, soaps, putty etc., 0.500%
Total cost for 10 sqm
BLD-CSTN-10-3
142
284
Painting Walls with Snowcem or other equal and
approved Water Proof Cement Paint over
Priming Coat, One Coat (All Colours)
Unit: 10 sqm
A. MATERIALS :
Cement Paint at 5 sqm., per kg kg 2.000
B. LABOUR
Painter day 0.300
Mazdoor (unskilled) day 1.500
Sundries including brushes, etc., 1.000%
Total cost for 10 sqm
BLD-CSTN-10-4
143
285
Painting Walls with Snowcem or other equal and
approved Water Proof Cement Paint over
Priming Coat, 2 Coats (All Colours)
Unit: 10 sqm
A. MATERIALS :
Cement Paint at 3 sqm., per kg kg 3.500
B. LABOUR
Painter day 0.500
Mazdoor (unskilled) day 1.500
Sundries including brushes, etc., 1.000%
Total cost for 10 sqm
713
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-10-5
144 Painting to new walls with 2 coats of water proof
cement paint of apporved brand and shade over a
base coat of approved cement primer grade I
making making 3 coats in all to give an even shade
after thourughly brushing the surface to remove all
dirt and remains of loose powdered materials,
including cost and conveyance of all materials to
work site and all operational, incidental, labour
charges etc. complete for finished item of work as
per SS 912 for internal walls
Cost of Cement Primer kg 1.00
Ist class painter day 0.21
2nd class painter day 0.49
Cost of water proof cement Paint of approved
quality
kg 3.50
1st class painter day 0.15
2nd class painter day 0.35
Mazdoor (unskilled) day 1.50
Total cost
BLD-CSTN-10-6
145
268
Painting, Priming Coat on New Wood Work
Unit: 10 sqm
A. MATERIALS :
Wood Primer L 0.700
B. LABOUR
Painter day 0.700
Sundries including brushes, soap, putty etc., 1.000%
Total cost for 10 sqm
BLD-CSTN-10-7
146
269
Painting, Priming Coat on New Iron Work
Unit: 10 sqm
A. MATERIALS :
Red Oxide Primer L 0.70
B. LABOUR
Painter day 0.70
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
BLD-CSTN-10-8 Varnishing to Wood Work, One Coat
Unit: 10 sqm
A. MATERIALS :
Varnish L 0.800
Linseed Oil - boiled L 0.600
B. LABOUR
Painter day 0.700
Man Mazdoor day 0.700
Sundries including brushes,fuel, size etc.,
Total cost for 10 sqm
147
281
714
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-10-9
Varnishing to Wood Work, Two Coats
Unit: 10 sqm
A. MATERIALS :
Varnish L 1.200
Linseed Oil - boiled L 1.100
B. LABOUR
Painter day 1.100
Man Mazdoor day 1.100
Sundries including brushes,fuel, size etc.,
Total cost for 10 sqm
BLD-CSTN-10-10
Painting with Ready mixed oil paint (all colours)
i. One Coat - New Wood Work :
Unit: 10 sqm
A. MATERIALS :
Ready mixed paint kg 1.600
B. LABOUR
Painter day 0.700
Sundries including brushes, soap, putty etc., LS
Total cost for 10 sqm
ii Two Coats - New Wood Work :
Unit: 10 sqm
A. MATERIALS :
Ready mixed paint kg 2.800
B. LABOUR
Painter day 1.200
Sundries including brushes, soap, putty etc., LS
Total cost for 10 sqm
iii One Coat - Old Wood Work & New Iron Work :
Unit: 10 sqm
A. MATERIALS :
Ready mixed paint kg 1.500
B. LABOUR
Painter day 0.700
Sundries including brushes, soap, putty etc., LS
Total cost for 10 sqm
iv Two Coats - Old Wood Work & New Iron Work:
Unit: 10 sqm
A. MATERIALS :
Ready mixed paint kg 2.4.
B. LABOUR
Painter day 1.200
Sundries including brushes, soap, putty etc., LS
Total cost for 10 sqm
v One Coat - Old Iron Work :
Unit: 10 sqm
A. MATERIALS :
Ready mixed paint kg 1.200
B. LABOUR
Painter day 0.700
Sundries including brushes, soap, putty etc., LS
Total cost for 10 sqm
149
256
to
265
148
282
715
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
vi Two Coats - Old Iron Work :
Unit: 10 sqm
A. MATERIALS :
Ready mixed paint kg 2.100
B. LABOUR
Painter day 1.100
Sundries including brushes, soap, putty etc., LS
Total cost for 10 sqm
vii Three Coats - Old Iron Work :
Unit: 10 sqm
A. MATERIALS :
Ready mixed paint kg 3.400
B. LABOUR
Painter day 1.500
Sundries including brushes, soap, putty etc., LS
Total cost for 10 sqm
viii Three Coats - New Wood Work :
Unit: 10 sqm
A. MATERIALS :
Ready mixed paint kg 3.900
B. LABOUR
Painter day 1.600
Sundries including brushes, soap, putty etc., LS
Total cost for 10 sqm
BLD-CSTN-10-11 Painting with :
i. Plastic Emulsion paint Grade I - One Coat for
New Wood Work, Old Wood Work & New Iron
Work :
A. MATERIALS :
Plastic Emulsion paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 0.500
B. LABOUR
Painter day 0.700
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
ii Plastic Emulsion paints - One Coat for Old Iron
A. MATERIALS :
Plastic Emulsion paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 0.400
B. LABOUR
Painter day 0.700
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
iii Plastic Emulsion paints - Two Coats for New
Wood Work :
A. MATERIALS :
Plastic Emulsion paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 0.900
B. LABOUR
Painter day 1.200
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
150
266
716
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
iv Plastic Emulsion paints - Two Coats for Old
Wood Work & New Iron Work :
A. MATERIALS :
Plastic Emulsion paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 0.800
B. LABOUR
Painter day 1.200
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
v Plastic Emulsion paints - Two Coats for New
Iron Work :
A. MATERIALS :
Plastic Emulsion paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 0.800
B. LABOUR
Painter day 1.100
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
vi Plastic Emulsion paints - Two Coats for Old Iron
Work :
A. MATERIALS :
Plastic Emulsion paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 0.700
B. LABOUR
Painter day 1.100
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
vii Plastic Emulsion paints - Three Coats for New
Wood Work :
A. MATERIALS :
Plastic Emulsion paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 1.200
B. LABOUR
Painter day 1.600
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
viii Plastic Emulsion paints - Three Coats for Old
Iron Work :
A. MATERIALS :
Plastic Emulsion paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 1.100
B. LABOUR
Painter day 1.500
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
BLD-CSTN-10-12
151
i
Painting with Synthetic Enamel paints - One
Coat - for New Wood Work, Old Wood Work &
New Iron Work
A. MATERIALS :
Synthetic Enamel paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 0.700
B. LABOUR
Painter day 0.700
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
717
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
ii Painting with Synthetic Enamel paints - One
Coat - For Old Iron Work
A. MATERIALS :
Synthetic Enamel paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 0.500
B. LABOUR
Painter day 0.700
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
iii Painting with Synthetic Enamel paints - Two
Coats - for New Wood Work
A. MATERIALS :
Synthetic Enamel paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 1.200
B. LABOUR
Painter day 1.200
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
iv Painting with Synthetic Enamel paints - Two
Coats - For Old Wood Work
A. MATERIALS :
Synthetic Enamel paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 1.100
B. LABOUR
Painter day 1.200
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
v Painting with Synthetic Enamel paints - Two
Coats - For New Iron Work
A. MATERIALS :
Synthetic Enamel paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 1.100
B. LABOUR
Painter day 1.100
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
vi Painting with Synthetic Enamel paints - Two
Coats - For Old Iron Work
A. MATERIALS :
Synthetic Enamel paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 0.900
B. LABOUR
Painter day 1.100
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
vii Painting with Synthetic Enamel paints - Three
Coats - for New Wood Work
A. MATERIALS :
Synthetic Enamel paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 1.700
B. LABOUR
Painter day 1.600
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
718
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
viii Painting with Synthetic Enamel paints - Three
Coats - For Old Iron Work
A. MATERIALS :
Synthetic Enamel paint (at 20 sqm / litre as per
British Paints (I) Ltd.
L 1.600
B. LABOUR
Painter day 1.500
Sundries including brushes, soap, putty etc.,
Total cost for 10 sqm
BLD-CSTN-10-13
152 Polishing on wood work with readymade wax
polish of approved brand and manufacture
New Work :
A. MATERIALS :
Readymade wax polish kg 0.500
B. LABOUR
Painter day 0.800
Healper day 0.800
Sundries including brushes, soap, cloth etc., LS
Total cost for 10 sqm
BLD-CSTN-10-14
153 Melamine polishing on wood work (one or more
coat)
New Work :
A. MATERIALS :
Melamine polish L 0.650
B. LABOUR
Painter day 0.800
Healper day 0.800
Sundries for Spraying Machine etc., LS
Total cost for 10 sqm
BLD-CSTN-10-15
154 French Spirit polishing Two or more coats on
new works including a coat of wood filler.
A. MATERIALS :
Shellac kg 0.228
Spirit L 1.630
B. LABOUR
Painter day 3.200
Sundries such as pigment, terpentaine, sand paper, putty,
wood filler, white woolen cloth, linseed oil, cotton etc.,
LS
Total cost for 10 sqm
BLD-CSTN-11
WOOD WORK, ALUMINUM DOORS,
WINDOWS, VENTILATORS Etc.,
BLD-CSTN-11-1
155 Best Teak Wood wrought and put up to 2 meters
(Schedule Item No 286)
Unit = 1 cum
Materials :
Teak wood large scantlings upto 2 m cum 1.000
Labour :
Carpenter day 17.700
Man Mazdoor day 8.800
Sundries including nails, screws etc., LS
Cost per cum
719
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-11-2
156 Best Teak Wood wrought and put up over 2
metres and below 3 metres in length (Schedule
Item No 287)
Unit = 1 cum
Materials :
Teak wood large scantlings over 2 m and below 3 m
in length
cum 1.000
Labour :
Carpenter day 17.700
Man Mazdoor day 8.800
Sundries including nails, screws etc., LS
Cost per cum
BLD-CSTN-11-3
157 Best Teak Wood wrought and put up in large scantling
of over 3 metres in length (Schedule Item No 288)
Unit = 1 cum
Materials :
Teak wood large scantlings over 2 m and below 3 m
in length
cum 1.000
Labour :
Carpenter day 17.700
Man Mazdoor day 8.800
Sundries including nails, screws etc., LS
Cost per cum
BLD-CSTN-11-4
158 Best Teak Wood wrought and put up for trusses
including straps and all iron work (Schedule
Item No 289)
Unit = 1 cum
Materials :
Teak wood large scantlings cum 1.000
Iron Work (average) kg 112.000
Labour :
Carpenter day 26.500
Man Mazdoor day 8.800
Sundries including nails, screws etc., LS
Cost per cum
BLD-CSTN-11-5
159 Fully Panelled doors - External or Internal -
Moulded panels (Schedule Item No 290)
A Single Shutter
i 800 x 2000 mm
*Teak wood cum 0.083
Labour, wrought and putup in position frame &
shutters
sqm 1.600
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
LS
Total for each door
ii 900 x 2000 mm
*Teak wood cum 0.088
Labour, wrought and putup in position frame &
shutters
sqm 1.800
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
720
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
iii 1100 x 2000 mm
*Teak wood cum 0.109
Labour, wrought and putup in position frame &
shutters
sqm 2.200
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
LS
Total for each door
iv 1200 x 2100 mm
*Teak wood cum 0.123
Labour, wrought and putup in position frame &
shutters
sqm 2.520
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
v 900 x 2100 mm
*Teak wood cum 0.094
Labour, wrought and putup in position frame &
shutters
sqm 1.890
Sundries inclusive of holdfasts and all wind appliances
(Vide relevant standard specification)
LS
Total for each door
vi 1500 x 2400 mm
*Teak wood cum 0.159
Labour, wrought and putup in position frame &
shutters
sqm 3.600
Sundries inclusive of holdfasts and all wind appliances
(Vide relevant standard specification)
LS
Total for each door
B Double Shutter
i 900 x 2000 mm
*Teak wood cum 0.096
Labour, wrought and putup in position frame &
shutters
sqm 1.800
Sundries inclusive of holdfasts and all wind appliances
(Vide relevant standard specification)
Total for each door
ii 1000 x 2000 mm
*Teak wood cum 0.104
Labour, wrought and putup in position frame &
shutters
sqm 2.000
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
iii 1300 x 2200 mm
*Teak wood cum 0.134
Labour, wrought and putup in position frame &
shutters
sqm 2.860
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
721
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
iv 1400 x 2300 mm
*Teak wood cum 0.147
Labour, wrought and putup in position frame &
shutters
sqm 3.220
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
* Note : Average rate for respective size scantlings
and rough plank
BLD-CSTN-11-6
160 Fully Panelled doors - Internal Five Ply - Ply-
wood Panels (Schedule Item No 291)
A Single Shutter
i 800 x 2000 mm
*Teak wood cum 0.068
Five - Ply - Ply - Wood brich sqm 0.720
Labour, wrought and putup in position frame &
shutters
sqm 1.600
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
LS
Total for each door
ii 900 x 2000 mm
*Teak wood cum 0.071
Five - Ply - Ply - Wood brich sqm 0.870
Labour, wrought and putup in position frame &
shutters
sqm 1.800
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
iii 1200 x 2100 mm
*Teak wood cum 0.100
Five - Ply - Ply - Wood brich sqm 1.160
Labour, wrought and putup in position frame &
shutters
sqm 2.520
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
LS
Total for each door
iv 1300 x 2200 mm
*Teak wood cum 0.106
Five - Ply - Ply - Wood brich sqm 1.390
Labour, wrought and putup in position frame &
shutters
sqm 2.860
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
v 900 x 2100 mm
*Teak wood cum 0.077
Five - Ply - Ply - Wood brich sqm 0.880
Labour, wrought and putup in position frame &
shutters
sqm 1.890
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
LS
Total for each door
722
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
vi 1000 x 2100 mm
*Teak wood cum 0.091
Five - Ply - Ply - Wood brich sqm 0.880
Labour, wrought and putup in position frame &
shutters
sqm 2.100
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
B Double Shutter
i 900 x 2000 mm
*Teak wood cum 0.082
Five - Ply - Ply - Wood brich sqm 0.710
Labour, wrought and putup in position frame &
shutters
sqm 1.800
Sundries inclusive of holdfasts and all wind appliances
(Vide relevant standard specification)
Total for each door
ii 1000 x 2000 mm
*Teak wood cum 0.088
Five - Ply - Ply - Wood brich sqm 0.820
Labour, wrought and putup in position frame &
shutters
sqm 2.000
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
iii 1100 x 2000 mm
*Teak wood cum 0.090
Five - Ply - Ply - Wood brich sqm 0.940
Labour, wrought and putup in position frame &
shutters
sqm 2.200
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
iv 1400 x 2300 mm
*Teak wood cum 0.123
Five - Ply - Ply - Wood brich sqm 1.900
Labour, wrought and putup in position frame &
shutters
sqm 3.600
Sundries inclusive of holdfasts and all wind
appliances (Vide relevant standard specification)
Total for each door
v 1500 x 2400 mm
*Teak wood cum 0.130
Five - Ply - Ply - Wood brich sqm 1.280
Labour, wrought and putup in position frame &
shutters
sqm 3.600
Sundries inclusive of holdfasts and all wind appliances
(Vide relevant standard specification)
Total for each door
* Note : Average rate for respective size scantlings
and rough plank
723
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-11-7
161 Furniture - Iron - for External doors (Schedule
Item 292)
Top Tower bolts (Ave : Size) Nos 2
Bottom Tower bolts 150mm long Nos 2
Parliament hings with screws Nos 6
Oxidised aldrop with bolts Nos 1
Wind cleats with hings Nos 2
(Same for all doors)
BLD-CSTN-11-8
162 Furniture - Iron - Internal doors (Schedule Item
293)
Top Tower bolts (Ave : Size) Nos 1
Bottom Tower bolts 150mm long Nos 2
Butt hings with screws Nos 6
Wind cleats with hings Nos 2
(Same for all doors)
BLD-CSTN-11-9
163 Glazed and Panelled doors (Schedule Item No.
294)
A Single Shutter
i 800 x 2000 mm
*Teak wood cum 0.072
Glass sqm 0.470
Labour, wrought and putup in position frame &
shutters
sqm 1.600
Sundries inclusive of putty, brads, hold fasts and all
wind appliances (Vide relevant standard
specification)
LS
Total for each door
ii 900 x 2000 mm
*Teak wood cum 0.076
Glass sqm 0.560
Labour, wrought and putup in position frame &
shutters
sqm 1.800
Sundries inclusive of putty, brads, hold fasts and all
wind appliances (Vide relevant standard
specification)
LS
Total for each door
iii 1200 x 2100 mm
*Teak wood cum 0.106
Glass sqm 0.760
Labour, wrought and putup in position frame &
shutters
sqm 2.520
Sundries inclusive of putty, brads, hold fasts and all
wind appliances (Vide relevant standard
specification)
LS
Total for each door
iv 1300 x 2200 mm
*Teak wood cum 0.115
Glass sqm 0.870
Labour, wrought and putup in position frame &
shutters
sqm 2.860
Sundries inclusive of putty, brads, hold fasts and all
wind appliances (Vide relevant standard
specification)
LS
Total for each door
724
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
B Double Shutter
i 900 x 2000 mm
*Teak wood cum 0.087
Glass sqm 0.420
Labour, wrought and putup in position frame &
shutters
sqm 1.800
Sundries inclusive of putty, brads, hold fasts and all
wind appliances (Vide relevant standard
specification)
LS
Total for each door
ii 1000 x 2000 mm
*Teak wood cum 0.092
Glass sqm 0.510
Labour, wrought and putup in position frame &
shutters
sqm 2.000
Sundries inclusive of putty, brads, hold fasts and all
wind appliances (Vide relevant standard
specification)
LS
Total for each door
iii 1100 x 2000 mm
*Teak wood cum 0.096
Glass sqm 0.600
Labour, wrought and putup in position frame &
shutters
sqm 2.200
Sundries inclusive of putty, brads, hold fasts and all
wind appliances (Vide relevant standard
specification)
LS
Total for each door
iv 1400 x 2300 mm
*Teak wood cum 0.123
Glass sqm 1.060
Labour, wrought and putup in position frame &
shutters
sqm 3.220
Sundries inclusive of putty, brads, hold fasts and all
wind appliances (Vide relevant standard
specification)
LS
Total for each door
v 1500 x 2400 mm
*Teak wood cum 0.130
Glass sqm 1.280
Labour, wrought and putup in position frame &
shutters
sqm 3.600
Sundries inclusive of putty, brads, hold fasts and all
wind appliances (Vide relevant standard
specification)
LS
Total for each door
* Note : Average rate for respective size scantlings
and rough planks.
725
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-11-10
164 Furniture - Same as for Fully Panelled Doors
External (Schedule Item No. 295)
Total for each door
BLD-CSTN-11-11
165 Framed and Planked Doors (Schedule Item No.
296)
i 1000 x 2000 mm
*Teak wood cum 0.107
Labour, wrought and putup in position frame &
shutters
sqm 2.000
Sundries inclusive of putty, brads, hold fasts and
wind appliances and screws for planks (Vide
standard specification)
LS
Total for each door
ii 1200 x 2100 mm
*Teak wood cum 0.127
Labour, wrought and putup in position frame &
shutters
sqm 2.520
Sundries inclusive of putty, brads, hold fasts and
wind appliances and screws for planks (Vide
standard specification)
LS
Total for each door
* Note : Average rate for respective size scantlings
and rough planks.
BLD-CSTN-11-12
166 Country wood Framed and Planked Doors
(Schedule Item No. 297)
Single Shutter :
i 1000 x 2000 mm
Country wood cum 0.107
Labour, wrought and putup in position frame &
shutters
sqm 2.000
Sundries inclusive of putty, brads, hold fasts and
wind appliances and screws for planks (Vide
standard specification)
LS
Total for each door
ii 1200 x 2100 mm
Country wood cum 0.127
Labour, wrought and putup in position frame &
shutters
sqm 2.520
Sundries inclusive of putty, brads, hold fasts and
wind appliances and screws for planks (Vide
standard specification)
LS
Total for each door
BLD-CSTN-11-13
167 Furniture - 6 Butt Hings - 1 Top and 2 Bottom
Tower Bolts and One Wrought steel safety Hasp
L.S. (Schedule Item No. 298)
Each Door
BLD-CSTN-11-14
168 Ledged Braced and Planked Doors (Schedule
Item No. 299)
Single Shutter :
i 800 x 2000 mm
*Teak wood cum 0.083
Labour, wrought and putup in position frame &
shutters
sqm 1.600
Sundries inclusive of hold fasts and wind appliances
and nails for planks (Vide standard specification)
LS
** Furniture - 3 Nos T - hinges - Vide SS for size - 2
Nos Chain and slopes country make.
LS
Total for each door
726
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
ii 1000 x 2100 mm
*Teak wood cum 0.100
Labour, wrought and putup in position frame &
shutters
sqm 2.100
Sundries inclusive of hold fasts and wind appliances
and nails for planks (Vide standard specification)
LS
** Furniture - 3 Nos T - hinges - Vide SS for size - 2
Nos Chain and slopes country make.
LS
Total for each door
Note : * Average rate for respective size scantlings
and rough planks.
** Note that for this type of door the furniture will be
supplied and fixed by the contractor.
BLD-CSTN-11-15
169 * Country wood Ledged Braced and Planked
Doors (Schedule Item No. 300)
i 800 x 2000 mm
Country wood cum 0.083
Labour, wrought and putup in position frame &
shutters
sqm 1.600
Sundries inclusive of hold fasts and wind appliances
and nails for planks (Vide standard specification)
LS
** Furniture - 3 Nos T - hinges - Vide SS for size - 2
Nos Chain and slopes country make.
LS
Total for each door
ii 1000 x 2100 mm
Country wood cum 0.100
Labour, wrought and putup in position frame &
shutters
sqm 2.100
Sundries inclusive of hold fasts and wind appliances
and nails for planks (Vide standard specification)
LS
** Furniture - 3 Nos T - hinges - Vide SS for size - 2
Nos Chain and slopes country make.
LS
Total for each door
** Note that for this type of door the furniture will be
supplied and fixed by the contractor.
Note : * Class of Country wood to be defined in
relevent schedule item.
BLD-CSTN-11-16
170 Flush type Doors with 35mm Thick Flush
Shutters with Bondwood solied Block Board
Type Faced on Both the sides with Commercial
Type Plywood (Schedule Item No. 301.)
Single Shutter :
i 900 x 2000 mm
*Teak wood cum 0.035
Flush Shutter 35mm thick (Vide relevant standard
specification)
sqm 1.530
Labour, wrought and putup in position frame &
shutters
sqm 1.800
Sundries inclusive of hold fasts and all wind appliances
(Vide standard specification)
Total for each door
727
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
ii 1000 x 2100 mm
*Teak wood cum 0.037
Flush Shutter 35mm thick (Vide relevant standard
specification)
sqm 1.820
Labour, wrought and putup in position frame &
shutters
sqm 2.100
Sundries inclusive of hold fasts and all wind
appliances (Vide standard specification)
Total for each door
*Note : Average rate for respective size scantlings.
BLD-CSTN-11-17
171 Windows Glazed (Schedule Item No. 302)
A Single Shutter :
i 600 x 1200 mm
*Teak wood cum 0.028
Glass sqm 0.390
Labour, wrought and putup in position frame &
shutters
sqm 0.720
Sundries inclusive of putty, brads, hold fasts and wind
appliances (Vide standard specification)
Total for each window
ii 800 x 1200 mm
*Teak wood cum 0.037
Glass sqm 0.500
Labour, wrought and putup in position frame & shutters sqm 0.960
Sundries inclusive of putty, brads, hold fasts and
wind appliances (Vide standard specification)
Total for each window
B Double Shutter :
i 1000 x 1200 mm
*Teak wood cum 0.041
Glass sqm 0.700
Labour, wrought and putup in position frame &
shutters
sqm 1.200
Sundries inclusive of putty, brads, hold fasts and
wind appliances (Vide standard specification)
Total for each window
ii 1200 x 1200 mm
*Teak wood cum 0.061
Glass sqm 0.710
Labour, wrought and putup in position frame & shutters sqm 1.440
Sundries inclusive of putty, brads, hold fasts and wind
appliances (Vide standard specification)
Total for each window
iii 1500 x 1200 mm (3 Pannels)
*Teak wood cum 0.072
Glass sqm 0.920
Labour, wrought and putup in position frame & shutters sqm 1.800
Sundries inclusive of putty, brads, hold fasts and wind
appliances (Vide standard specification)
Total for each window
iv 1000 x 1700 mm (2 Pannels)
*Teak wood cum 0.059
Glass sqm 0.970
Labour, wrought and putup in position frame & shutters sqm 1.700
Sundries inclusive of putty, brads, hold fasts and
wind appliances (Vide standard specification)
Total for each window
728
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-11-18
172 Furniture for Double Leaf Windows Glazed With
Top Lights (Schedule Item No. 303)
Banel Bolts 100 mm long each 2
Top tower bolts 150 mm long each 2
Bottom bolts 150 mm long each 2
Parliament hinges each 4
BLD-CSTN-11-19
173 Furniture for Double Leaf Windows Glazed
without Top Lights (Schedule Item No. 304)
LS
Top tower bolts 150 mm long each 2
Bottom bolts 150 mm long each 2
Parliament hinges each 4
Same for all such windows
BLD-CSTN-11-20
174 Furniture for Single Leaf Windows Glazed
without Top Lights (Schedule Item No. 305)
LS
Top tower bolts 150 mm long each 1
Bottom tower bolts 150 mm long each 1
Parliament hinges each 2
Same for all such windows
BLD-CSTN-11-21
175 Windows Panelled (Schedule Item No. 306)
A Single Shutter
i 600 x 1200 mm
*Teak wood cum 0.039
Labour, wrought and putup in position frame &
shutters
sqm 0.720
Sundries inclusive of hold fasts and wind appliances
(Vide standard specification)
Total for each window
ii 700 x 1200 mm
**Teak wood cum 0.043
Labour, wrought and putup in position frame &
shutters
sqm 0.840
Sundries inclusive of hold fasts and wind appliances
(Vide standard specification)
Total for each window
B Double Shutter
i 800 x 1200 mm
*Teak wood cum 0.051
Labour, wrought and putup in position frame &
shutters
sqm 0.960
Sundries inclusive of hold fasts and wind appliances
(Vide standard specification)
Total for each window
ii 1000 x 12000 mm
*Teak wood cum 0.059
Labour, wrought and putup in position frame &
shutters
sqm 1.200
Sundries inclusive of hold fasts and wind appliances (Vide
standard specification)
Total for each window
iii 1200 x 1200 mm
*Teak wood cum 0.081
Labour, wrought and putup in position frame &
shutters
sqm 1.440
Sundries inclusive of hold fasts and wind appliances (Vide
standard specification)
Total for each window
*Note : Average rate for respective size scantlings.
*Note : Average rate for respective size scantlings.
729
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
iv 900 x 1200 mm
**Teak wood cum 0.056
Labour, wrought and putup in position frame &
shutters
sqm 1.080
Sundries inclusive of hold fasts and wind appliances (Vide
standard specification)
Total for each window
**Note : Average rate for respective size scantlings
and rough planks.
BLD-CSTN-11-22
176 Windows Panelled & Glazed (Schedule Item No.
307)
A Single Shutter
600 x 1200 mm
**Teak wood cum 0.036
Glass sqm 0.070
Labour, wrought and putup in position frame &
shutters
sqm 0.720
Sundries inclusive of putty, brads, hold fasts and
wind appliances (Vide standard specification)
Total for each window
B Double Shutter
i 900 x 1200 mm
**Teak wood cum 0.052
Glass sqm 0.100
Labour, wrought and putup in position frame &
shutters
sqm 1.080
Sundries inclusive of putty, brads, hold fasts and wind
appliances (Vide standard specification)
Total for each window
ii 1200 x 1200 mm
**Teak wood cum 0.077
Glass sqm 0.120
Labour, wrought and putup in position frame &
shutters
sqm 1.440
Sundries inclusive of putty, brads, hold fasts and wind
appliances (Vide standard specification)
Total for each window
C 1500 x 1200 mm (3 Pannels)
**Teak wood cum 0.094
Glass sqm 0.150
Labour, wrought and putup in position frame &
shutters
sqm 1.800
Sundries inclusive of putty, brads, hold fasts and
wind appliances (Vide standard specification)
Total for each window
**Note : Average rate for respective size scantlings and
rough planks.
177 Furniture for Windows Panelled : Single Leaf with half
Shutters (Schedule Item No. 308)
Cabin hooks and eyes 200 mm long each 2
Butt hinges 75 mm size each 4
Top tower bolts 150 mm long each 1
Bottom bolts 150 mm long each 1
Same for all such windows
BLD-CSTN-11-23
178 Furniture for Windows Panelled : Double Leaf
with half Shutters (Schedule Item No. 309)
Cabin hooks and eyes 200 mm long each 4
Butt hinges 75 mm size each 8
Top tower bolts 150 mm long each 2
Bottom bolts 150 mm long each 2
Same for all such windows
BLD-CSTN-11-24
179 Teak Wood Windows - Ledged Braced and
Planked (Schedule Item No. 310)
730
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
i 600 x 1200 mm (half Shutters)
*Teak wood cum 0.034
Labour, wrought and putup in position frame & shutters sqm 0.720
Sundries inclusive of all furniture and fitting in accordance
with relevant standard specification
LS
Total for each window
ii 800 x 1200 mm (half Shutters)
*Teak wood cum 0.048
Labour, wrought and putup in position frame &
shutters
sqm 0.960
Sundries inclusive of all furniture and fitting in accordance
with relevant standard specification
LS
Total for each window
iii 900 x 1200 mm (half Shutters)
*Teak wood cum 0.052
Labour, wrought and putup in position frame &
shutters
sqm 1.080
Sundries inclusive of all furniture and fitting in accordance
with relevant standard specification
LS
Total for each window
iv 1000 x 1200 mm (half Shutters)
*Teak wood cum 0.052
Labour, wrought and putup in position frame & shutters sqm 1.200
Sundries inclusive of all furniture and fitting in accordance
with relevant standard specification
LS
Total for each window
*Note : Average rate for respective size scantlings
and rough planks.
BLD-CSTN-11-25
180 Ventilators Glazed - Fixed Double Frame and
with Wire Netting (Schedule Item No. 312)
i 800 x 500 mm
*Teak wood cum 0.012
Glass sqm 0.240
Wire netting sqm 0.190
Labour, wrought and putup in position sqm 0.400
Sundries inclusive of putty brads and iron hold fasts where
such are necessary say in 30 cm wall.
LS
Total for each Ventilator
ii 1000 x 500 mm
*Teak wood cum 0.014
Glass sqm 0.310
Wire netting sqm 0.240
Labour, wrought and putup in position sqm 0.500
Sundries inclusive of putty brads and iron hold fasts where
such are necessary say in 30 cm wall.
LS
Total for each Ventilator
iii 1200 x 600 mm
*Teak wood cum 0.018
Glass sqm 0.480
Wire netting sqm 0.290
Labour, wrought and putup in position sqm 0.720
Sundries inclusive of putty brads and iron hold fasts
where such are necessary say in 30 cm wall.
LS
Total for each Ventilator
*Note : Average rate for respective size scantlings
731
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-11-26
181 Swing Ventilators - Glazed (Schedule Item No.
313)
i 800 x 500 mm
*Teak wood cum 0.021
Glass sqm 0.190
Labour, wrought and putup in position frame &
shutters
sqm 0.400
Sundries inclusive of putty brads sash centres brass
ring iron cleats and window card - vide relevant
standard specifications.
LS
Total for each Ventilator
ii 1000 x 500 mm
*Teak wood cum 0.025
Glass sqm 0.024
Labour, wrought and putup in position frame &
shutters
sqm 0.500
Sundries inclusive of putty brads sash centres brass
ring iron cleats and window card - vide relevant
standard specifications.
LS
Total for each Ventilator
iii 1200 x 600 mm
*Teak wood cum 0.030
Glass sqm 0.390
Labour, wrought and putup in position frame &
shutters
sqm 0.720
Sundries inclusive of putty brads sash centres brass
ring iron cleats and window card - vide relevant
standard specifications.
LS
Total for each Ventilator
*Note : Average rate for respective size scantlings
and rough planks.
Aluminium Fixed Glazing
BLD-CSTN-11-27
182 Supply and fixing of aluminimum fixed glazing as per
drawing using standard powder coated/ anodised
aluminimum section of 101.4 x 44.45 x 3.18 mm thick fitted
with 6.0mm thick / 4.0 mm thick plain glass glazing fitted
with suitable Aluminimum glazing clips and aproved brand
silicon sealant including cost and conveyance of all
materials labour charges for manufacturing fixing in
position using wooden blocks and sheet metal screw etc. to
complete for finished item of work as approved by
Engineer-in-charge
Unit - 1 sqm
A) MATERIAL REQUIREMENT
ALUMINIUM SECTION
GLAZING with GLASS
SILICON SEALANT
RUBBER BEADING
B) LABOUR CHARGES
1st Class Carpenter day 0.947
2nd Class Carpenter day 1.158
Power Saw Cutter - Hand Operated - Operator day 0.105
Power Drill - Hand Operated - Operator day 0.211
Unskilled Mazdoor day 0.632
C) Machinery
Power Saw Cutter - Hand Operated - Hire charges Hrs 0.842
Power Drill - Hand Operated - Hire Charges Hrs 1.684
Supervision Charges Nos 0.211
Power charges for Motors 1%
BASIC COST per 1 sqm
Aluminimum Partition partly glazed
732
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-11-28
183 Supply and fixing of aluminimum Partition partly
glazed as per drawing using standard powder
coated/ anodised aluminimum section of 101.4 x
44.45 x 3.18 mm thick fitted with 12.0mm thick
Particle Boards - prelaminated up to 2.1 M height
and balance height provided with 5.0 mm thick plain
glass glazing fitted with suitable Aluminimum
glazing clips and aproved brand silicon sealant
including cost and conveyance of all materials
labour charges for manufacturing fixing in position
using wooden blocks and sheet metal screw etc. to
complete for finished item of work as approved by
Engineer-in-charge
Unit - 1 sqm
A) MATERIAL REQUIREMENT
ALUMINIUM SECTION
PARTICLE BOARD - Prelaminated
GLAZING with GLASS
SILICON SEALANT
RUBBER BEADING
B) LABOUR CHARGES
1st Class Carpenter day 1.042
2nd Class Carpenter day 1.042
Power Saw Cutter - Hand Operated - Operator day 0.104
Power Drill - Hand Operated - Operator day 0.139
Unskilled Mazdoor day 0.347
C) Machinery
Power Saw Cutter - Hand Operated - Hire charges Hrs 0.833
Power Drill - Hand Operated - Hire Charges Hrs 1.111
Supervision Charges Nos 0.174
Power charges for Motors 1%
BASIC COST per 1 sqm
BLD-CSTN-11-29
184 Aluminium Anodised Casement windows
Unit - 1 sqm
Supply and fixing Aluminium Anodised Casement windows
as per approved drawing with aluminium anodised sections
of Series C Jindal Hollow sections and outer frame of 8804
of size 46 x 44 mm, Shutter frame of 8802 of size 44 mm x
46 mm and Mullion frame of 8803 of size 59 x 38 and
glazing section of 4433 with plain clear float glass 6 mm
thick fixed including supply and fixing aluminium powder
coated 1 No.of casement friction stay hinges for each
shutter, 1 Nos. aluminium handles of 150 mm for each
shutter and all labour charges for fixing the fixtures with
required no.of screws, bolts and nuts and including labour
charges for fixing the frame in position, fixing shutter to
frame etc. completed for finished item of work
Unit - 1 sqm
A) MATERIAL REQUIREMENT
ALUMINIUM SECTION
GLAZING with GLASS
SILICON SEALANT
RUBBER BEADING
Alum.Anodised.PC Friction stay casement hinges
Alum.Anodised.PC Handles
B) LABOUR CHARGES
1st Class Carpenter day 0.360
2nd Class Carpenter day 1.081
as per design
as per design
as per design
as per design
as per design
as per design
as per design
as per design
as per design
733
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Power Saw Cutter - Hand Operated - Operator day 0.360
Power Drill - Hand Operated - Operator day 0.360
Unskilled Mazdoor day 1.081
C) Machinery
Power Saw Cutter - Hand Operated - Hire charges Hrs 2.883
Power Drill - Hand Operated - Hire Charges Hrs 2.883
Supervision Charges Nos 0.360
Power charges for Motors 1%
BASIC COST per 1 sqm
Aluminium Two/ Three Track Sliding Windows
BLD-CSTN-11-30
185 Supply and fixing Aluminium Anodised Two/ Three Track
Sliding Windows as per approved drawing with aluminium
anodised sections of Series C Jindal sections and outer
frame top horizontals & both verticals of 8774 of size 62 x
29.5 mm and bottom horizontal - two track frame of 8773 of
size 62 x 29.5 mm, Shutter frame top, bottom and verticals
of 8304 of size 50 mm x 20 mm and Weather interlocking
frame of 8306 of size 50 x 20 with plain clear float glass 5
mm thick fixed including supply and fixing aluminium
handles of 100 mm for each shutter, nylon rollers assembly
and all labour charges for fixing the fixtures with required
no.of screws, bolts and nuts and including labour charges
for fixing the frame in position, fixing shutter to frame etc.
completed for finished item of work
UNIT 1 sqm
A) MATERIAL REQUIREMENT
ALUMINIUM SECTION
GLAZING with GLASS
SILICON SEALANT
RUBBER BEADING
Alum.Anodised.PC Handles
B) LABOUR CHARGES
1st Class Carpenter day 0.347
2nd Class Carpenter day 1.042
Power Saw Cutter - Hand Operated - Operator day 0.347
Power Drill - Hand Operated - Operator day 0.347
Unskilled Mazdoor day 1.042
C) Machinery
Power Saw Cutter - Hand Operated - Hire charges Hrs 2.778
Power Drill - Hand Operated - Hire Charges Hrs 2.778
Supervision Charges Nos 0.347
Power charges for Motors 1%
BASIC COST per 1 sqm
as per design
as per design
as per design
as per design
as per design
734
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Aluminium Anodised Doors - Single Shutter
BLD-CSTN-11-31
186 Supply and fixing Aluminium Anodised Doors - Single
Shutter as per approved drawing with aluminium anodised
sections of Jindal sections and outer frame top horizontals
& both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm
Shutter frame top, bottom and verticals of 4504 of size
44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621
of size 49.91 x 44.45 x 3 mm with plain clear float glass 5
mm thick fixed including supply and fixing aluminium
handles of 100 mm for each shutter, floor springs/
hydraulic door closure assembly and all labour charges for
fixing the fixtures with required no.of screws, bolts and nuts
and including labour charges for fixing the frame in
position, fixing shutter to frame etc. completed for finished
item of work
UNIT 1 sqm
A) MATERIAL REQUIREMENT
ALUMINIUM SECTION
GLAZING with GLASS
SILICON SEALANT
RUBBER BEADING
Alum.Anodised.PC Handles
Hydraulic Floor Spring/ Door Closure
B) LABOUR CHARGES
1st Class Carpenter day 0.417
2nd Class Carpenter day 0.833
Power Saw Cutter - Hand Operated - Operator day 0.417
Power Drill - Hand Operated - Operator day 0.417
Unskilled Mazdoor day 1.250
C) Machinery
Power Saw Cutter - Hand Operated - Hire charges Hrs 3.333
Power Drill - Hand Operated - Hire Charges Hrs 3.333
Supervision Charges Nos 0.417
Power charges for Motors 1%
BASIC COST per 1 sqm
BLD-CSTN-11-32
187 Removing white wash or colour wash by steel wire
brushing and/or scraping; sand papering and
preparing the wall surface smooth including
necessary repairs to scratches complete
Details of cost for 10 sq.m
Labour :
White washer / Mason 2nd Class day 0.010
Mazdoor (unskilled) day 0.170
Sundries such as sand paper and scraper etc.
Scaffolding
Add for water charges @ 1 %
Add for contractor's profit and overheads
Cost for 10 sq.m.
Cost per sq.m
BLD-CSTN-11-33
188 Removing white wash or colour wash by steel wire
brushing and/or scraping; sand papering and
preparing the ceiling and/or sloping roofs surface
smooth including necessary repairs to scratches
complete
Deatailed cost for 10 sqm
Rate as per above item 10 sqm
Add 10 % extra for ceiling / sloping roof
Cost per 10 sq.m
Cost per sq.m
as per design
as per design
as per design
as per design
as per design
as per design
735
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-11-34
189 Removing white wash or colour wash by steel wire
brushing and/or scraping; sand papering and
preparing the wall surface smooth including
necessary repairs to scratches complete for the wall
surface spoiled by smoke soot
Rate as per Item No (203) 10 sqm
For washing the wall surface spoiled by smoke soot
with clear water before sand papering the surface
smooth and including necessary repairs to the
scratches complete
Details of cost for 10 sq.m
Labour :
Mazdoor (unskilled) day 0.080
Sundries
Add for water charges @ 1 %
Add for contractor's profit and overheads
Cost for 10 sq.m.
Cost per sq.m
BLD-CSTN-11-35
190 Removing white wash or colour wash by steel wire
brushing and/or scraping; sand papering and
preparing the ceiling and/or sloping roofs surface
smooth including necessary repairs to scratches
complete for the ceiling surface spoiled by smoke
soot
Rate as per Item No (205) 10 sqm
Extra 10% for washing the surface with clean water
on ceiling and/or sloping roofs
Cost per 10 sq.m
Cost per sq.m
BLD-CSTN-11-36
191 Washing and cleaning of decorated wall surfaces
with soap, soda and water
Details of cost for 10 sq.m
Labour :
White washer / Mason 2nd Class day 0.010
Mazdoor (unskilled) day 0.170
Sundries such as soap, soda, sand paper and
scaper etc
Add for water charges @ 1 %
Cost for 10 sq.m.
Cost per sq.m
BLD-CSTN-11-37
192 Washing and cleaning of the old plastered ceiling
and/or sloping roofs with soap, soda and water
Rate as per Item above
Extra 10% over
Cost per 10 sq.m
Cost per sq.m
BLD-CSTN-11-38
193 Washing and cleaning of oil and grease spots on
decorated wall surface by suitable chemical
Details of cost for 10 sq.m
Labour :
White washer / Mason 2nd Class day 0.010
Mazdoor (unskilled) day 0.170
Sundries, such as chemical etc.
Add for water charges @ 1 %
Cost for 10 sq.m.
Cost per sq.m
736
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-12 DISMANTLING & DEMOLITION
BLD-CSTN-12-1
194 Demolishing and disposal of unserviceable
materials within 100 metres lead
i Lime concrete.
Details of cost for 1 cu.m.
Labour :-
Mazdoor (unskilled) day 1.220
Sundries
Add for water charges @ 1 %
Cost per cu m
ii Unreinforced cement concrete upto 15 cm
thicknes
Details of cost for 1 cu.m.
Labour :-
Mazdoor (unskilled) day 2.440
Sundries
Add for water charges @ 1 %
Cost per cu m
iii Unreinforced cement concrete more than 15 cm
thickness
Details of cost for 1 cu.m.
Labour :-
Mazdoor (unskilled) day 4.880
Sundries
Add for water charges @ 1 %
Cost per cu m
BLD-CSTN-12-2
195 Demolition including stacking of serviceable
materials and disposal of unserviceable materials
within 100 metres lead
i R.C.C. work
Details of cost for 1 cu.m.
Labour :-
Mazdoor (unskilled) day 4.320
Sundries
Add for water charges @ 1 %
Cost per cu m
ii Reinforced Brick work:
Details of cost for 1 cu.m.
Labour :-
Mazdoor (unskilled) day 4.090
Sundries
Add for water charges @ 1 %
Cost per cu m
BLD-CSTN-12-3
196 Extra over item 20.3 for cutting steel bars in R.C.C.
of R.B. work (sectional area of R.C.C. or R.B. Work
to be measured) Details of cost for one Sq.m. of
sectional area
Reinforced area considering 1% Labour for
cuttings 0.01 Sq.m. reinforcement
Blacksmith 2nd class day 0.500
Mazdoor (Male) day 0.500
Sundries
Add for water charges @ 1 %
Cost per sq m
737
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-12-4
197 Dismantling doors, windows and clear storey
windows, ventilators etc.; (wood or steel) shutters
including chowkhats, architraves, hold fasts and
other attachments etc., complete and stacking them
within 100 metre lead
i Not exceeding 3 sq.m. in area:
Details of cost per each
Labour :-
Mason, II class day 0.100
Mazdoor (male) day 0.200
Blacksmith II class day 0.050
Sundries
Add for water charges @ 1 %
Cost per each
ii Exceeding 3 sq.m. in area
Details of cost per each
Labour :-
Mason, II class day 0.130
Mazdoor (male) day 0.270
Blacksmith II class day 0.070
Sundries
Add for water charges @ 1 %
Cost per each
BLD-CSTN-12-5
198 Taking out doors, windows and clearestorey window
shutters (steel or wood) including stacking within
100 metres lead
i Not exceeding 3 sq.m. in area:
Details of cost per each
Labour :-
Carpenter II class day 0.060
Mazdoor (male) day 0.120
Sundries
Add for water charges @ 1 %
Cost per each
ii Exceeding 3 sq.m. in area
Details of cost per each
Labour :-
Carpenter II class day 0.080
Mazdoor (male) day 0.160
Sundries
Add for water charges @ 1 %
Cost per each
BLD-CSTN-13 MISCELLANEOUS BUILDING ITEMS
BLD-CSTN-13-1
199 Providing and fixing aluminium step edging 'L'
shape of size 38 mm x 12 mm x 3 mm (thick) to
stairs
Details of cost for 3 metres length
Materials:
Aluminium step edging 'L' shape 38 x 12 x 3mm
(thick) = 3.00 metres with 5% wasage
m 3.150
Carriage of materials
Sundries (Wooden plugs, screws and painting
underneath of strips with bitumanistic paint, etc.,)
Labour :-
Carpenter II class day 0.090
Mason I class day 0.250
Mazdoor (male) day 0.250
Add for water charges @ 1 %
Cost for 3 m
Cost per m
738
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-13-2
200 Providing and fixing aluminium step edging 'L'
shape of size 57 mm x16 mm x 3 mm (thick) to
stairs
Details of cost for 3 metres length
Materials:
Aluminium step edging 'L' shape 57 mm x16 mm x
3 mm (thick) with 5% wasage
m 3.150
Carriage of materials
Sundries (Wooden plugs, screws and painting
underneath of strips with bitumanistic paint, etc.,)
Labour :-
Carpenter II class day 0.090
Mason I class day 0.250
Mazdoor (male) day 0.250
Add for water charges @ 1 %
Cost for 3 m
Cost per m
BLD-CSTN-13-3
201 Cutting RCC steps for fixing of aluminium step
edging and make good to match the surroundings
Details of cost for 3 metres
Cement Mortar
Labour :-
Mason, II Class day 1.000
Mazdoor (male) day 0.100
Add for water charges @ 1 %
Cost for 3 m
Cost per m
BLD-CSTN-13-4
202 Providing and fixing 25 mm bore galvanised M.S.
tube (light grade) outlet in cement mortar 1:3(1
cement: 3 fine sand) including cutting and making
good the wall
Details of cost for 10 pipes 12.5 cm long day i.e.,
1.25 metres
Materials:
Galvanised mild steel tube (light grade) 25 mm
nominal bore 10 x 12.5 cm = 1.25 metre with
wastage of 5%
m 1.310
Labour :-
For cutting and fixing in position
Assistant fitter day 0.100
Mason. day 0.400
Mazdoor (male). day 0.400
Sundries
Add for water charges @ 1 %
Cost for 1.25 m
Cost per m
BLD-CSTN-13-5
203 Providing and fixing 1.80 metre long RCC fencing
posts with 6 mm bar nibs as per design in plate No.
22/2/2. (earth work & concrete to be paid for
separately)
Details of cost for 10 pipes 12.5 cm long day i.e.,
1.25 metres
Materials:
Galvanised mild steel tube (light grade) 40 mm
nominal bore 10 x 12.5 cm = 1.25 metre with
wastage of 5%
m 1.310
Labour :-
For cutting and fixing in position
Assistant fitter day 0.100
Mason. day 0.400
Mazdoor (male). day 0.400
Sundries
739
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Add for water charges @ 1 %
Cost for 1.25 m
Cost per m
BLD-CSTN-13-6
204 Providing and fixing 1.80 metre long RCC fencing
posts with 6 mm bar bibs as per design in plate No.
22/2/2. (earth work & concrete to be paid for
separately)
Details of cost for 10 posts, i.e., 0.336 Cu. m
(Details as per Annexure ' X ' at the end of this item)
Materials:
Cement concrete 1:2:4 (1 cement : 2 coarse sand :4
graded stone aggregate 12.5 mm nominal size)
cum 0.336
(Rate as per item No.5.42.d Section Concrete work)
M.S. reinforcement 6 mm dia bars 10 x 4 x
1.88 = 75.20 metres 10 x 9 x 0.50 =
45.00 metres./ l20.00 m 120.20 m @ 0.22
Kg/m=26.44 Kg
kg 26.440
(Rate as per item No.5.51 Section Concrete work)
Centering and shuttering cum 0.336
(Details as per Annexure 'X')
(Rate as per item No.9.1.8. of Section 9 Form
work).
10 mm cement plaster with cement mortar 1:2 (1
cement: 2 sand)
sqm 9.880
(Details as per Annexure 'X')
Carriage of R.C.C. posts
6 mm bar bibs
Sundries
Labour for fixing posts in line
Mason, 1st Class day 0.120
Mason, 2nd Class day 0.120
Mazdoor (Male) day 0.250
Add Water charges on A @ 1%
Add Contractor's profit and overheads on 'A' + 'B' +
'C @ 10%
Cost for 10 posts
Cost per post
Sub Analysis :
Plastering with CM 1:3, 12 mm thick 10 sqm 1.000
Deduct - CM 1:3 cum 0.025
Add - Cement (720-480 x .125) cum 30.000
Rate for 10 sqm
Rate per sqm
Annexure - 'X'
Details of quantities for RCC posts
Concrete quantity
Area of bottom A, =15+12.5/2 x 8.75+1/2 x 22/7
(6.25) = 120.31+61.38=181.69 Sq.m.
Area of top A2= 10+7.5/1 x 6.25 + 1/2 x 22 x (3.75)
2
/
7= 54.69+22.10=76.79 Sq.Cm.
A
v
A
2
= 118.12 Sq. Cm.
Volume = h/3(A, + A2 + VA,A2)
A2+A2+A, A2=0.V03766 Sq.m
740
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Volume = 1.05/3 * 0.03766 = 0.0131810 Cu.m.
=0.0132 Cu.m.
Volume of lower square portion =0.165x0.165x0.75
=0.0204 Cu.m
Total volume = 0.0336 Cu. m
Quantity for 10 posts = 0.336 Cu.m
Quantity of centring & shuttering 0.2770*
1.05=0.2908 Sq.m.
3x0.165x0.75=0.3712
0.165x0.165=0.0272
0.10 x 0.10=0.0100/0.6992 Sq.m..
For ten posts=10 x 0.6992 = 6.992 Sq.m.
Quantity of surface plaster area
12.50+7.60+7.60=27.70 Cm.
xr=3.1416x5=15.71Cm./43.41Cm 0.434 x
1.05=0.4560 Sq.m.
4x0.165x0.75=0.4950
0.165x0.165=0.0272
0.10 x 0.10=0.0100/0.9882 Sq.m. For 10
posts = 10 x 0.9882=9.88 Sq.m.
BLD-CSTN-13-7
205 Supplying and fixing galvanised steel barbed wire
(IS : 278-1962 Type I) weighing 9.38 Kg per 100
metres (min.), Straining and fixing to any type of
standard, rails, straining bolts, including securing
with and provision of galvanised mild steel wire,
stapples or steel pins, etc., as directed (Posts and
struts of wood, concrete, steel, etc.) and straining
bolts shall be paid for separately).
Details of Cost per 100 metres (day line of wire)
Materials:
Galvanised steel barbed wire IS type I weighing
9.38 Kg/100 metre
kg 9.380
Carriage of barbed wire.
G.I. staples steel pins or binding wire LS
Labour :-
For fixing & stretching wire
Blacksmith, 1st Class day 0.150
Blacksmith, 2nd Class day 0.150
Mazdoor (male). day 0.300
Sundries.
Add water charges @ 1 %
Cost for 100 metres day line of wire
Rate per m
BLD-CSTN-13-8
206 Broken glass coping as specified on top of walls
In cement mortar 1:3 (1 cement: 3 sand)
Details of cost per one Sq.m.
Materials:
Broken glass. kg 19.500
Cement mortar 1:3(1 cement: 3 sand) cum 0.040
Labour :-
Mason (Skilled) day 0.080
Mazdoor (Male) day 0.160
Scaffolding etc
Add water charges @ 1 %
Cost per Sq.metre
741
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-14
ANTE-TERMITE TREATMENT
BLD-CSTN-14-1
207 Providing Antitermite treatment as per IS 6315 (Part - 2)
2001 (Pre-constructional chemical treatment measures)
along the internal & external vertical faces of the columns,
plinth beams, basement and top surface of the basement
filling below flooring bed as per the specified procedure
conforming to IS 6315 (Part-2) 2001 and other relevant
approved specification duly using Chlorpyriphos/ Lindane
emulsifiable concentrate 20% with 1% concentration @ 7.5
Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of
the horizontal surface of the substructure to a depth of 500
mm around columns & 300 mm deep around plinth beams,
basements & floor filling area including excavation channel
along the wall & rodding etc & cost & conveyance of all
materials to the site, cost of labour for spraying, rodding etc
complete for finished item of work as per the approval of
the Engineer-in-Charge
Unit = 10 sqm
A) Chlorpyriphos/ Lindane emulsifiable concentrate of
20%
1 liter : 19 Parts water Therefore: 868.55 L /20 Lit 4.100
Add 12%wastage Liters 0.41
Total Quantity 4.51
B) Add Water Charges @ 1% 1%
C) Labour Charges
Man Mazdoor day 3.0
Sprayer day 0.22
D) Hire charges
Sprayer, drilling machine etc 10%
sundries & contingencies 3%
Water charges & electricity 1.50%
Add OH & CP
BASIC COST per 1 sqm
Note: CPWD - Rate Analysis per 9 Sqm
Vertical
Chloropyriphos Lit
Earthwork excavation cum
Beldar Nos
Horizontal
Chloropyriphos Lit
Vertical Nos
Beldar Nos
Hire charges
Sprayer, drilling machine etc
sundries & contingencies
Water charges & electricity
Add OH & CP
BLD-CSTN-15 CENTERING, FORM WORK etc.
BLD-CSTN-15-1
208 Providing traditional centering, shuttering and
scaffolding using Cashewrina balli props and
bracings supporting wooden brackets, wooden wall
plates, wooden runners and steel plate form work as
per the approved plan and other accessories as per
the standard trade practice including hire charges
for ballies, runners, wooden members and cost and
conveyance of all other consumable accessories,
taxes etc complete for finished item of work
UNIT 1 sqm
(I) Unsupported Roof Height up to - 3.66 M (12'0")
A) MATERIAL REQUIREMENT
Cashewrina Balli Props - 3" to 4" dia - 12'-0" Height Nos 2.40
742
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Wall Plate Brackets / beam bottom supports Nos 1.44
Wedge Plate fixture Nos 1.44
Runner beams of approximately 4" x 4" size RM 16.00
Steel Plate - form work plates - sqm 1.86
B) LABOUR CHARGES 0.00
1st Class Carpenter day 0.16
2nd Class Carpenter day 0.28
Unskilled Mazdoor day 0.48
Supervision Charges day 0.04
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm
(II) Unsupported Roof Height up to - 4.60 M (15'0")
A) MATERIAL REQUIREMENT
Cashewrina Balli Props - 3" to 4" dia - 12'-0" Height Nos 4.32
Wall Plate Brackets / beam bottom supports Nos 1.44
Wedge Plate fixture Nos 1.44
Runner beams of approximately 4" x 4" size RM 16.00
Steel Plate - form work plates - sqm 1.86
B) LABOUR CHARGES
1st Class Carpenter Nos 0.20
2nd Class Carpenter Nos 0.36
Unskilled Mazdoor Nos 0.68
Supervision Charges Nos 0.06
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm
(III) Unsupported Roof Height up to - 7.30 M (24'0")
A) MATERIAL REQUIREMENT
Cashewrina Balli Props - 3" to 4" dia - 12'-0" Height Nos 5.76
Wall Plate Brackets / beam bottom supports Nos 1.44
Wedge Plate fixture Nos 1.44
Runner beams of approximately 4" x 4" size RM 16.00
Steel Plate - form work plates - sqm 1.86
B) LABOUR CHARGES
1st Class Carpenter Nos 0.28
2nd Class Carpenter Nos 0.52
Unskilled Mazdoor Nos 1.08
Supervision Charges Nos 0.08
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm
BLD-CSTN-15-2
209 Providing rigid Steel centering, shuttering and
scaffolding using steel pipes, adjustable Jack screw
props, acro spans, couplers, tie rods, bracings
members, supporting brackets, acro span beams
and steel plate/ ply-wood form work as per the
approved shuttering designs & plan and other
accessories as per the IS Norms and stability
calculations including hire charges for jack pipes,
acro spans, runners, wooden members and cost
and conveyance of all other consumable
accessories, taxes etc complete for finished item of
work
UNIT 1 sqm
(I) Unsupported Roof Height up to - 3.66 M (12'0")
A) MATERIAL REQUIREMENT
Jack Screw Adjsutable Props - 50 mm dia B Class
Pipes
for vertical props placed @ 3'0" c/c in bothways
Approximately 33'-0" x 33'-0" roof area
743
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Span Beams - 2.4 M Long (Acro Spans) -
Approximtely
Wallers, Couplers, Foot Plates
Steel Plate Beam Bottom - form work plates - 9"
wide
230 mm wide plate x 80 RM
Beam Sides - form work plates - 15" wide
400 mm wide plate x 80 RM - both sides
Slab Bottom Plates - formwork plates
3'-0" x 4'-0" - 7 Nos
3'-0" x 2'-0" - 2 Nos
1'-0" x 4'-0" - 1 Nos
Slab Sides - 0-6" Height - 40.0 RM
Total Scaffolding Pipes & Centering Plates -
Appx -
Kgs 62.51
B) LABOUR CHARGES
1st Class Carpenter day 0.22
2nd Class Carpenter day 0.38
Unskilled Mazdoor day 0.72
Supervision Charges day 0.04
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm
(II) Unsupported Roof Height up to - 7.32 M (24'0")
A) MATERIAL REQUIREMENT
Heavy Frames - 50 mm dia B Class Pipes (HD
Span Beams - 2.4 M Long (Acro Spans) -
Approximtely
Wallers, Couplers, Foot Plates
Steel Plate Beam Bottom - form work plates - 9"
wide
230 mm wide plate x 80 RM
Beam Sides - form work plates - 15" wide
400 mm wide plate x 80 RM - both sides
Slab Bottom Plates - formwork plates
3'-0" x 4'-0" - 7 Nos
3'-0" x 2'-0" - 2 Nos
1'-0" x 4'-0" - 1 Nos
Slab Sides - 0-6" Height - 40.0 RM
Total Scaffolding Pipes & Centering Plates -
Appx -
Kgs 112.635
B) LABOUR CHARGES
1st Class Carpenter day 0.32
2nd Class Carpenter day 0.52
Unskilled Mazdoor day 1.28
Supervision Charges day 0.06
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm
744
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
TYPE OF STRUCTURE
UNIT
COST
OF
CENT
ERIN
RCC
STRUCTU
RE UNIT
MEASUR
EMENT
B C
A FOOTINGS 3.88 sqm per 1 cum
B PEDESTALS 6.17 sqm per 1 cum
C PLINTH BEAMS 9.35 sqm per 1 cum
D LINTELS 7.94 sqm per 1 cum
E CHAJJAS - SUNSHADES 1.22 sqm per 1 sqm
F COLUMNS 11.15 sqm per 1 cum
G BEAMS 9.35 sqm per 1 cum
H SLABS - Up to 150 mm thick 1.05 sqm per 1 sqm
I SLABS - above 150 mm - Up to 300 mm thick 1.09 sqm per 1 sqm
J SLABS - above 300 mm thick 1.14 sqm per 1 sqm
K WAFFLE - (GRID) SLABS (Rib Beams with Slabs) 3.85 sqm per 1 sqm
L PERGOLA SLABS (Only Rib Beams) 2.70 sqm per 1 sqm
M ARCHE BEAMS - up to 1.5 M Span 10.63 sqm per 1 cum
N ARCHE BEAMS - above 1.5 M Span 10.78 sqm per 1 cum
O DOME SLABS 17.19 sqm per 1 cum
P HELICAL STAIRCASES 1.31 sqm per 1 sqm
BLD-CSTN-15-3
210 Providing STAGE SCAFFOLD with staging using
Cashewrina balli props and bracings supporting
wooden brackets, wooden stage scaffold boards
including hire charges for cashewrina ballies,
wooden baords, scaffolds etc., and cost and
conveyance of all other consumable accessories,
taxes etc complete for finished item of work for
PLAN AREA
UNIT 1 sqm
(I) Unsupported Roof Height up to - 3.66 M (12'0")
A) MATERIAL REQUIREMENT
Cashewrina Balli Props - 3" to 4" dia - 12'-0" Height Nos 2.40
Scaffold Boards - Bamboo scaffolds - Bamboos -
8'0" long
Nos 2.70
B) LABOUR CHARGES
1st Class Carpenter day 0.04
2nd Class Carpenter day 0.30
Unskilled Mazdoor day 0.48
Supervision Charges day 0.04
Consumables like Rope, Nails, de-shuttering oil 1%
Note : Cost of Centering charges with different centering & scaffolding materials for
different structures may be calculated as per the guidelines given Below
For calculating centering charges of RCC Structures, using either cashewrina balli
scaffolding or steel pipe scaffolding, the respective cost may be arrived by taking the
above values.
CENTERING AREA
A
Therefore, Centering charges for any structure:C= A x B
745
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm - PLAN AREA
(II) Unsupported Roof Height up to - 4.60 M (15'0")
A) MATERIAL REQUIREMENT
Cashewrina Balli Props - 3" to 4" dia - 12'-0" Height Nos 4.32
Scaffold Boards - Bamboo scaffolds - Bamboos -
8'0" long
Nos 2.70
B) LABOUR CHARGES
1st Class Carpenter day 0.08
2nd Class Carpenter day 0.38
Unskilled Mazdoor day 0.68
Supervision Charges day 0.06
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm - PLAN AREA
(III) Unsupported Roof Height up to - 7.30 M (24'0")
A) MATERIAL REQUIREMENT
Cashewrina Balli Props - 3" to 4" dia - 12'-0" Height Nos 5.76
Scaffold Boards - Bamboo scaffolds - Bamboos -
8'0" long
Nos 2.70
B) LABOUR CHARGES
1st Class Carpenter day 0.12
2nd Class Carpenter day 0.54
Unskilled Mazdoor day 1.08
Supervision Charges day 0.08
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm - PLAN AREA
BLD-CSTN-15-4
211 Providing ACCESS SCAFFOLD using Cashewrina
balli props and bracings supporting wooden
brackets, wooden stage scaffold boards including
hire charges for cashewrina ballies, wooden baords,
scaffolds etc., and cost and conveyance of all other
consumable accessories, taxes etc complete for
finished item of work for ELEVATION AREA
UNIT 1 sqm
(I) Up to - 3.66 M (12'0")
A) MATERIAL REQUIREMENT
Cashewrina Balli Props - 3" to 4" dia - 12'-0" Height Nos 1.74
Scaffold Boards - Bamboo scaffolds - Bamboos -
8'0" long
Nos 0.72
B) LABOUR CHARGES
1st Class Carpenter day 0.07
2nd Class Carpenter day 0.11
Unskilled Mazdoor day 0.2
Supervision Charges day 0.04
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm - VERTICAL ELEVATION AREA
(II) Up to - 7.32 M (24'0")
A) MATERIAL REQUIREMENT
746
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Cashewrina Balli Props - 3" to 4" dia - 12'-0" Height Nos 1.74
Scaffold Boards - Bamboo scaffolds - Bamboos -
8'0" long
Nos 0.38
B) LABOUR CHARGES
1st Class Carpenter day 0.12
2nd Class Carpenter day 0.22
Unskilled Mazdoor day 0.36
Supervision Charges day 0.04
Consumables like Rope, Nails,de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm - VERTICAL ELEVATION AREA
BLD-CSTN-15-5
212 Providing STAGE SCAFFOLD using Steel Scaffolding Pipe
Frames made of 40 mmd ia MS Pipes and bracings with
scaffold boards including hire charges for MS Pipe Frames
scaffolds boards etc., and cost and conveyance of all other
consumable accessories, taxes etc complete for finished
item of work for PLAN AREA
UNIT 1 sqm
(I) Unsupported Roof Height up to - 3.66 M (12'0")
A) MATERIAL REQUIREMENT
Jack Screw Adjsutable Props - 50 mm dia B Class
Pipes
for vertical props placed @ 3'0" c/c in bothways
Lock Pins
LD Foot Plates
LD Couplers
Total Scaffolding Pipes - Appx - Kgs 39.26
B) LABOUR CHARGES
1st Class Carpenter day 0.04
2nd Class Carpenter day 0.34
Unskilled Mazdoor day 0.60
Supervision Charges day 0.04
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm - PLAN AREA
(II) Unsupported Roof Height up to - 7.32 M (24'0")
A) MATERIAL REQUIREMENT
Heavy Frames - 50 mm dia B Class Pipes (HD
Towers)
Lock Pins
LD Foot Plates
LD Couplers
Total Scaffolding Pipes - Appx - Kgs 112.635
B) LABOUR CHARGES
1st Class Carpenter day 0.12
2nd Class Carpenter day 0.58
Unskilled Mazdoor day 1.20
Supervision Charges day 0.08
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm - PLAN AREA
747
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
BLD-CSTN-15-6
213 Providing ACCESS SCAFFOLD using Steel Scaffolding
Pipe Frames made of 40 mmd ia MS Pipes and bracings
with scaffold boards including hire charges for MS Pipe
Frames scaffolds boards etc., and cost and conveyance of
all other consumable accessories, taxes etc complete for
finished item of work for ELEVATION AREA
UNIT 1 sqm
(I) Up to - 3.66 M (12'0")
A) MATERIAL REQUIREMENT
MS Pipe Scaffold Frames - 1.20 x 1.50 M
Approximately 27.3 M Long x 3.66 M High
MS Pipe Bracing structure - 1.5 x 2.25 M
Scaffold Board
Lock Pins
LD Foot Plates
LD Couplers
Total Scaffolding Pipes - Appx - Kgs 19.7496
B) LABOUR CHARGES
1st Class Carpenter day 0.07
2nd Class Carpenter day 0.11
Unskilled Mazdoor day 0.24
Supervision Charges day 0.04
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm - VERTICAL ELEVATION AREA
(II) Up to - 7.32 M (24'0")
A) MATERIAL REQUIREMENT
MS Pipe Scaffold Frames - 1.20 x 1.50 M
Approximately 27.3 M Long x 3.66 M High
MS Pipe Bracing structure - 1.5 x 2.25 M
Scaffold Board
Lock Pins
LD Foot Plates
LD Couplers
Total Scaffolding Pipes - Appx - Kgs 19.14
B) LABOUR CHARGES
1st Class Carpenter day 0.12
2nd Class Carpenter day 0.22
Unskilled Mazdoor day 0.44
Supervision Charges day 0.04
Consumables like Rope, Nails, de-shuttering oil 1%
Tape, cover plates 1%
Tools like Hammers etc., 1%
BASIC COST per 1 sqm - VERTICAL ELEVATION AREA
Description of Structure
a
b
Cost of Scaffolding materials = Rs. A
Steel scaffolding pipes, jack Props, wallers, Foot plates,
brackets, steel Centering Plates,etc.,
Cashewrina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc.,
Let :
Cost of Scaffolding materials = Rs. A
Scrap value of Scaffolding materials = Rs. B
Let :
C
(Usually B = A * 10%)
Number of uses of Scaffolding materials = C
Therefore, Hire Charges of scaffolding Materials:
(Rs. A - Rs. B)
1. For Material Lift Charges & Labour rate for scaffolding above 7.32 M - increase @ 50% on
labour component for each upper floor on First Floor Rate (7.32 M)
2. For Hire Charges of scaffolding Materials following ratesmay be allowed:
Note: HIRE & LIFT CHARGES - for all Scaffolding Materials
748
BLD-CSTN
Index-code S No Description Unit Quantity
Rate
Rs.
Amount
Rs.
Remarks
1 2 3 4 5 6 7
Number of uses of Scaffolding materials (C )
Wooden Materials - No of Uses - 10 Times (C)
Period of Requirement of Centering Material
Slabs : 14 + 4 = 18 days
Columns : 1.50 days
Foundations : 2 days
Scrap value of Scaffolding materials = Rs. B
(Usually B = A * 10%)
Period of Hire of Scaffolding materials, in years = C
Life of Scaffolding materials, in years = D
Therefore, Hire Charges of scaffolding Materials:
Note: While calculating the Capital Cost of the materials, deprication shall be allowed
based on the service life of the materials.
Period of Hire of Steel Scaffolding materials, in years = 1.64 (200 days per Annum)
D
[(Rs. A - Rs. B)*C]
Life of Steel Forms & Scafholding Material - 3 Years (D)
749