Scribd
Upload
538 views

C-Purlin Design

This document summarizes the design criteria and details for a C-PURLIN member. Key specifications of the C-PURLIN include its material, dimensions, properties, loads, and required versus provided section modulus to check the design. The C-PURLIN has a depth and width of 75mm by 50mm, is made of steel with a yield strength of 270MPa, and is 3500mm in length. It is designed to support a distributed dead load of 0.46kN/m and live load of 0.864kN/m. Checks are performed to verify the provided section modulus about both axes exceeds the required values, indicating the design is safe.

Uploaded by

Joseph Cloyd L. Lamberte
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
538 views

C-Purlin Design

This document summarizes the design criteria and details for a C-PURLIN member. Key specifications of the C-PURLIN include its material, dimensions, properties, loads, and required versus provided section modulus to check the design. The C-PURLIN has a depth and width of 75mm by 50mm, is made of steel with a yield strength of 270MPa, and is 3500mm in length. It is designed to support a distributed dead load of 0.46kN/m and live load of 0.864kN/m. Checks are performed to verify the provided section modulus about both axes exceeds the required values, indicating the design is safe.

Uploaded by

Joseph Cloyd L. Lamberte
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

C-PURLIN Design

DESIGN CRITERIA:

VERSION: 2.2.0

15

75

Material = 1 # - 50 x 75 mm LC (Steel)
Member: C-PURLIN
Dimension:
depth =
75
mm
Quantity =
1
width =
50
mm
50
Cee =
15
mm
thickness =
1.2
mm
Fy =
270
MPa
fb =
189
MPa
mm2
Area =
246
1.2
3
mm
Sx =
4614
mm3
Sy =
3449
Length =
3500
mm
Spacing =
600
mm
2
N/m
DL =
770
N/m2
WLL =
1440
Load:
DL =
0.462000
kN/m
WL =
0.864000
kN/m

15

DESIGN DETAILS:
Rise =

1.5
4.55
0.318450236
18.24586994

0.438771463
0.144649933

kN/m
kN/m

0.381788029
0.144649933

kN/m
kN/m

Wn =
Wt =

0.438771463
0.144649933

kN/m
kN/m

Mn =
Mt =

671.868803
221.4952098

N-m
N-m

3554.861392
1171.932327

mm^3
mm^3

Run =
Angle =
Theta =

m
rad
degrees

Due to DL:
Wn =
Wt =
Due to DL + WL:
Wn =
Wt =
Design Load:

Required Section Modulus:


Sx =
Sy =

REMARKS:
Sx =
Sy =

4614.20
3448.89

>
>

Program Created by: JOSEPH CLOYD L. LAMBERTE, MSCE, PICE, SEAD

3554.86
1171.93

SAFE
SAFE
Program Licensed to:

You might also like