CLICK HERE TO ORDER OR GET MORE INFO ON AMSOIL PRODUCTS

AMSOIL Material Safety Data Sheet Date Issued/Revised: June 17, 2008
Supersedes: November 15, 2004
Section 1: Product and Company Identification

Manufacturer: AMSOIL, Inc. Telephone:

925 Tower Avenue CHEMTREC (Spill Emergency Only): 1-800-424-9300
Superior, WI 54880 Information: 715-392-7101

AMSOIL Product Code .................................................................. APF NFPA & HMIS Rating

Product Label Name ......................................................... Power Foam
Product Use .... Primarily Organic Based Surfactant Cleaning Solution Red
Flammability
4
Blue Yellow
Section 2: Composition/Information on Ingredients Health Instability
2 White 0
OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200) Special
N/A

Vapor Pressure Weight

Component Cas#
mm Hg @ Temp %
Aromatic petroleum distillate 64742-94-5 .5 68 25
OSHA PEL: Not established, ACGIH TLV: Not established
Aromatic hydrocarbon 64742-94-5 .09 68 18
OSHA PEL: Not established, ACGIH TLV: Not established
Hydrotreated light napthentic distillate 64742-53-6 .01 68 12
OSHA PEL: 5 mg/m3 (oil mist)
2-Butoxyethanol, glycol ether EB 111-76-2 .6 68 10
OSHA PEL: 25 ppm , ACGIH TLV: 25 ppm: Skin
Morpholine 110-91-8 7 68 3
OSHA PEL: 20 ppm , ACGIH TLV: 20 ppm: Skin
Propane 74-98-6 6350 68 8
OSHA PEL: 1000 ppm, ACGIH TLV: Asphyxiant

Section 3: Hazards Identification

WARNING! Contents Under Pressure, Extremely Flammable, Vapor may cause flash fire
POTENTIAL HEALTH EFFECTS: Eye, inhalation and skin irritant.

Section 4: First Aid Measures

EYE: Do not rub eyes. Flush with large amounts volumes for 15-20 minutes. Seek medical attention.

SKIN: Wash immediately with soap and water. Remove contaminated clothing and launder before reuse.
Discard shoes and leather articles saturated with the product. Obtain medical advice if irritation
occurs.

INHALATION: Remove exposed person to fresh air. If breathing is labored give oxygen. If breathing has
stopped apply artificial respiration. Get immediate medical attention.

INGESTION: DO NOT INDUCE VOMITING. If conscious, give 2 glasses of water. If vomiting does occur,
keep head below hips to reduce risk of aspiration. Get immediate medical attention.

Section 5: Fire Fighting Measures

FLAMMABILITY PROPERTIES: Flash Point ..................................................... -156 F

Method ..................................................... Estimated
LFL/UFL ......................................................... 0.9/2.7
Auto-ignition Temperature ............... Not Determined

Product Code: APF, Power Foam Page 1 of 4

AMSOIL Material Safety Data Sheet Date Issued/Revised: June 17, 2008
Supersedes: November 15, 2004
EXTINGUISHING MEDIA: Foam, alchohol foam, CO2, dry chemical, water fog

UNUSUAL FIRE & EXPLOSION HAZARDS: Closed containers may explode from internal pressure build-up when
exposed to extreme heat and discharged contents. Vapor accumulation can flash or explode if ignited. Over
exposure to decomposition products may cause a health hazard. Symptoms may not be readily apparent. Obtain
medical attention

FIREFIGHTING EQUIPMENT: Full bunker gear recommended. Including a positive pressure self-contained breathing
apparatus.

Section 6: Accidental Release Measures

Isolate spill area. Provide adequate ventilation. Wear appropriate personal protection. Recover free product for
recycle and/or disposal. Add sand, earth or other suitable absorbent to spill area. Prevent entry into sewers and
waterways. Check under Transportation and Labeling (DOT/CERCLA) and Other Regulator Information Section
(SARA) for hazardous substances to determine regulatory reporting requirements for spill.

Section 7: Handling and Storage

HANDLING: Do not puncture or incinerate can. Avoid contact with eyes, skin or clothing. Wash hands after
handling. Empty container may retain product residue, which may exhibit hazards of product.

STORAGE: Store and use in cool, dry, well-ventilated areas. Do not store above 120°F. Keep away from heat or
flame.

Section 8: Exposure Controls/Personal Protection

VENTILATION: Use adequate general or local exhaust ventilation to keep airborne concentrations below
exposure limits.

RESPIRATORY: Use a NIOSH approved respirator when necessary.

SKIN: Use Viton or Nitrile gloves to avoid prolonged or repeated skin contact.

EYE: Use splash goggles or face shield where splashing is expected or can occur.
3
EXPOSURE LIMITS: The Threshold Limit Value (TLV) of 5 mg/m is suggested for oil mist.

Section 9: Physical and Chemical Properties

Physical State ....................................................................................Liquid

Boiling Point .......................................................................... 44°F to 500°F
Freezing/Melting Point ......................................................... Not Applicable
Vapor Pressure .................................................................. Not Determined
Vapor Density (Air=1) ........................................................... Not Determined
Evaporation Rate ............................................................... Not Determined
Solubility in Water ..................................................................................NIL
Specific Gravity (Water=1) ...................................................................... 0.86
Density, lb./gal. .................................................................................... 7.17
Volatility (Volume) ........................................................................ Unknown
VOC ............................................................................................. Unknown
pH....................................................................................... Not Determined
Coefficient of Water/Oil Distribution ................................... Not Determined
Odor .................................................Similar to antifreeze, slight fruity odor
Odor Threshold .................................................................. Not Determined
Appearance ............ Transparent clear to milky color, foams when applied
Viscosity, cSt @ 100 C ........................................................ Not Applicable
Product Code: APF, Power Foam Page 2 of 4

CLICK HERE TO ORDER OR GET MORE INFO ON AMSOIL PRODUCTS

AMSOIL Material Safety Data Sheet Date Issued/Revised: June 17, 2008
Supersedes: November 15, 2004
Viscosity, cSt @ 40 C .......................................................... Not Applicable
Viscosity Index ..................................................................... Not Applicable

Section 10: Stability and Reactivity

STABILITY: Stable. Avoid applications to hot surfaces.

INCOMPATIBILITY: Avoid contact with strong oxidants.

HAZARDOUS POLYMERIZATION: Will not occur.

HAZARDOUS DECOMPOSITION OF PRODUCT: May produce fumes when heated to decomposition. Toxic
oxides of carbon.

Section 11: Toxicological Information

ACUTE EXPOSURE
Eye Irritation: Moderate to strong eye irritation. Based on data from components or similar material.

Skin Irritation: Not expected to be a primary skin irritant. Based on data from components or similar
material. Prolonged or repeated skin contact as from clothing wet with material may
cause dermatitis. Symptoms may include redness, edema, drying, defatting, and
cracking of the skin.

Respiratory Irritation: If material is misted or if vapors are generated from heating, exposure may cause
irritation of mucous membranes and the upper respiratory tract similar to that observed
with mineral oil. Based on data from components or similar materials. Under good
industrial hygiene practices where all exposure limits are observed, respiratory irritation
should not be a problem.

CHRONIC EXPOSURE
Chronic Toxicity: Some components may aggravate liver and kidney disease, anemia, coronary disease
or rhythm disorders of the heart. Only in quantities exceeding the TLV..

Carcinogenicity: No data available to indicate product present at greater than 0.1% are a carcinogenic
hazard.

Mutagenicity: No data available to indicate product present at greater than 1.0% present a mutagenic
or genotoxic hazard.

Reproductive Toxicity: No data available to indicate product present at greater than 1.0% present a
reproductive hazard.

Teratogenicity: No data available to indicate product present at greater than 1.0% present a
teratogenic hazards.

ADDITIONAL INFORMATION

Exposure Limits: Under conditions, which may generate mists, observe the OSHA PEL of 5 mg per
cubic meter, ACGIH STEL of 10 mg per cubic meter.

There are extensive toxicological data available on the various components of this product. An adequate
representation of all these data is beyond the scope of this document. Please contact the AMSOIL Material Safety
Data Sheet Coordinator for more details.

Product Code: APF, Power Foam Page 3 of 4

CLICK HERE TO ORDER OR GET MORE INFO ON AMSOIL PRODUCTS

AMSOIL Material Safety Data Sheet Date Issued/Revised: June 17, 2008
Supersedes: November 15, 2004

Section 12: Ecological Information

No data available on the adverse effects of this product on the environment.

Section 13: Disposal Considerations

Material is expected to be hazardous when disposed. Dispose of in accordance with all local, state and federal
regulations.

Section 14: Transport Information

This product is classified as Combustible liquids N.O.S., NA1993 for DOT shipping. Hazard Label ORM-D. For
further information relative to spills resulting from transportation incidents, refer to the latest DOT Emergency
Response Guidebook for Hazardous Materials.

Section 15: Regulatory Information

U.S. Federal Regulations

OSHA Table Z ............................................................................ Not Applicable
TSCA ........................................................................................................Listed
CERCLA 40 CFR 302.4 ............................................................. Not Applicable
SARA Title III
Section 302 Extremely Hazardous ...................................... Not Applicable
Section 311/312
Fire Hazard ......................................................................................... Yes
Reactive Hazard ...................................................................................No
Release of Pressure ........................................................................... Yes
Acute Health Hazard ........................................................................... Yes
Chronic Health Hazard ..........................................................................No
Section 313 Toxic Chemical ................ 2-Butoxyethanol, Glycol Ether EB,
………………………………………………………… CAS# 111-76-2 @ 10%

U.S. State Regulations

California (Prop 65)
Does not contain chemicals known to the state of California to cause cancer.

International Regulations
WHMIS ............................................................................ All components listed

Section 16: Other Information

The information and recommendations contained herein are, to the best of AMSOIL’s knowledge and belief,
accurate and reliable as of the date issued. AMSOIL makes no warranty or guarantee, expressed or implied, of their
accuracy or reliability, and AMSOIL shall not be liable for any loss or damage based upon the criteria supplied by the
developers of these rating systems, together with AMSOIL’s interpretation of the available data.

CLICK HERE TO ORDER OR GET MORE INFO ON AMSOIL PRODUCTS

Product Code: APF, Power Foam Page 4 of 4