Scribd
Upload
1K views

ABB Firmware DownloadInstructions

The document provides instructions for downloading the correct main drive parameter set based on the drive voltage and software/firmware version. It specifies checking parameter 33.01 and the serial number to determine whether to use parameter set 9823 4113 01.zip and select the ASXR7320 or ASXR7330 file, or to use 9823.4113.02 for drives over 500V.

Uploaded by

Natan Hernandez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

ABB Firmware DownloadInstructions

The document provides instructions for downloading the correct main drive parameter set based on the drive voltage and software/firmware version. It specifies checking parameter 33.01 and the serial number to determine whether to use parameter set 9823 4113 01.zip and select the ASXR7320 or ASXR7330 file, or to use 9823.4113.02 for drives over 500V.

Uploaded by

Natan Hernandez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Download instruction for main drive parameterset.

1. FOR Drives <= 500V



In order to know which parameterset to download into the main drive it should be checked which
software / firmware version is present in the main drive. This can be easily checked by following
the next steps:
Use the control panel of the main drive and go to Parameter 33.01.

If you see
o "ASXR7320" or less than 20 under Parameter 33.01 on the control panel
o a serial number of the converter < *X0810XXXXX*
you should use parameterset:

9823 4113 01.zip and look for the following file.
\\Main drive parameterset for ASXR7320\9823.4113.01_ GA Main drive ACS800_04M_0400_5_ASXR7320.dwp

If you see
o "ASXR7330" or higher than 30 Parameter 33.01 on the control panel
o a serial number of the converter >= *X0810XXXXX*
you should use parameterset:
9823 4113 01.zip and look for the following file.
\\Main drive parameterset for ASXR7330\9823.4113.01_ GA Main drive ACS800_04M_0400_5_ASXR7330.dwp

2. FOR Drives >500V

Use parameterset 9823.4113.02

You might also like