Scribd
Upload
490 views2 pages

Reset Ink Level HP Cartidges HP 21,22,27,28,56,57,58

This document provides instructions for resetting the ink level on HP printer cartridges models HP21, HP22, HP27, HP28, HP56, HP57 and HP58. The reset process involves placing pieces of tape over contacts on the cartridge and reinserting it into the printer. This tricks the printer into thinking the cartridge is full after it has detected the ink level as empty. Separate instructions are provided for cartridge models HP21, HP56, HP58 and models HP22, HP57 as the contact points that need taping are different between the two groups. The overall process takes 10-11 steps and results in the printer displaying the cartridge ink level as full once complete.

Uploaded by

jelenjek83
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
490 views2 pages

Reset Ink Level HP Cartidges HP 21,22,27,28,56,57,58

This document provides instructions for resetting the ink level on HP printer cartridges models HP21, HP22, HP27, HP28, HP56, HP57 and HP58. The reset process involves placing pieces of tape over contacts on the cartridge and reinserting it into the printer. This tricks the printer into thinking the cartridge is full after it has detected the ink level as empty. Separate instructions are provided for cartridge models HP21, HP56, HP58 and models HP22, HP57 as the contact points that need taping are different between the two groups. The overall process takes 10-11 steps and results in the printer displaying the cartridge ink level as full once complete.

Uploaded by

jelenjek83
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

1

Reset Ink Level HP Cartidges HP


21,22,27,28,56,57,58

Cartridges HP21 and HP22 can be found on the following printer, Hp deskjet 3920, D2400
series, D2466, D1300 series, PSC 1402, 1410 and many Hp printer again. Problem on the HP
printer, if indicator ink level cartridges is empty, the printer cannot be use to print. (This
methode can be used for HP Cartidges HP 27, HP, 28, HP 56, HP57, HP 58)
Reset Ink level on HP Printer that using cartdiges HP 21 and HP 22.
INK LEVEL RESET FOR HP Cartridges HP 21, 56, 58
1. Remove cartridge from your printer.
2. Place a piece of tape over the top left contact as shown in
red on the picture to the right. and then place cartridge back
into printer.
3. The printer will perform and alignment page. (Some newer
models no longer print alignment pages. If printer runs
through a series of priming routines and stops for 20
seconds continue through with next step.)
4. Once an alignment page has been printed remove cartridge
from printer and then place a piece of tape over the second
contact shown in red. then Place cartridge into printer with
both pieces of tape. (One covering the first contact and one
cover the second contact.)
5. Printer will print another alignment page. (Some newer models no longer print
alignment pages. If printer runs through a series of priming routines and stops for 20
seconds continue through with next step.)
6. Once the second alignment page has been printed remove cartridge from printer.
7. Remove tape pieces from cartridge contacts Make sure there is no residual adhesive on
cartridge contacts.
8. Place cartridge into printer. Cartridge should now read full.
2

INK LEVEL RESET FOR HP Cartridges HP 22, 57
1. Remove cartridge from your printer.
2. Place a piece of tape over the top left contact as shown in red on the picture to the
right.
3. With the tape covering the contact place cartridge back into printer.
4. The printer will perform and alignment page. (Some
newer models no longer print alignment pages. If printer
runs through a series of priming routines and stops for
20 seconds continue through with next step)
5. Once an alignment page has been printed remove
cartridge from printer.
6. Place a piece of tape over the second contact shown in
red.
7. Place cartridge into printer with both pieces of tape.
(One covering the first contact and one cover the second
contact.)
8. Printer will print another alignment page. (Some newer models no longer print
alignment pages. If printer runs through a series of priming routines and stops for 20
seconds continue through with next step.)
9. Once the second alignment page has been printed remove cartridge from printer.
10. Remove tape pieces from cartridge contacts
Make sure there is no residual adhesive on cartridge contacts.
11. Place cartridge into printer. Cartridge should now read full.

You might also like