Scribd
Upload
262 views

Design of Plate Girder

This document contains design calculations for various structural members including: 1. A tension member with a designed action of 196 KN and factor of safety of 1.5 was designed to be ISA 65x65x6. 2. A compression member with a factored load of 5909 KN and class of buckling c was designed as an I section with an allowable strength of 6842 KN. 3. A compression member with bending designed for a factored load of 337 KN axial force and 1720 KNm bending moment was designed as an I section with allowable strengths of 8064 KN in compression and 4269 KN-m in bending.

Uploaded by

lakshmi1011
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
262 views

Design of Plate Girder

This document contains design calculations for various structural members including: 1. A tension member with a designed action of 196 KN and factor of safety of 1.5 was designed to be ISA 65x65x6. 2. A compression member with a factored load of 5909 KN and class of buckling c was designed as an I section with an allowable strength of 6842 KN. 3. A compression member with bending designed for a factored load of 337 KN axial force and 1720 KNm bending moment was designed as an I section with allowable strengths of 8064 KN in compression and 4269 KN-m in bending.

Uploaded by

lakshmi1011
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 7

Tension 131 KN

Factor of safety 1.5


Designed action 196 KN
Member Size ISA 65x65x6
Anc (connected leg) 780 mm2
Ago (Gross area of not connected leg) 708 mm2
E 200000
fy 250 N/mm2
fu 490
Partial factor of safety(ymlo) 1.25 (table-7)
Partial factor of safety(ymo) 1.10
beta (1.4 0.076 (w/t) (fy/fu) (bs/Lc ) 1.22
Design Strength 471 KN ok
Design of Tension Member
Compressive Force 3939 KN
Factored Load 5909 KN
Member Name I section
Type of member Plastic (650/80<8.18)
class of buckling c
K 0.80
Length 22500 mm
Section Property
Ae 62720 mm2
E 200000
fy 330 N/mm2
fcc 178 N/mm2
Izz 6961250000
Iyy 1831060000
r 171 mm SP7
KL/r 105.35
Allowable Strength
lamda () 1.36
0.49 (table-7)
1.712
Partial factor of safety (m0) 1.1 (table-7)
fcd 109 N/mm2
Pd 6842 KN ok
6648.32
Design of Compression Member
Project :
Client :
Design of : Design of Main roof
Designed By :
Reviewed By : Mr. Soumya Ray Approved By : Dr. S. Chatterjee
Revision Status :
Reference Results
Design of Compression with Bending Member
Compressive Force 337 KN
Mztop 1720 KNm
Mzbot 1 KNm
Mytop 1 KNm
Mybot 1 KNm
Factored Load
P 337 KN
Mz 1720 KNm
My 1 KNm
Member Name I section
Type of member Plastic (650/80<8.18)
class of buckling c
K 1.00
Length 7500 mm
Section Property
E 200000 Mpa
G 76923.08 Mpa
fy 350 N/mm
2
fcc 536 N/mm
2
ry 124 mm
centre to centre distance between flanges, hf 760 mm
Allowable Strength in compression
lamda () 0.81
0.49 (table-7)
y 0.975
z 0.573
Partial factor of safety (m0) 1.1 (table-7)
fcdy 209 N/mm
2
fcdz 301 N/mm
2
Pdy 8064 KN ok
Pdz 11600 KN
Allowable Strength in bending
d 760 mm
tw 16 mm
d/tw 47.5
e 0.845
67e 56.615
cl.8.2.1 Check : Web not subjected to shear buckling before yielding
IS 800:2007
Indoor Aquatic Stadium at Saifai district, Etawah
Uttar Pradesh Rajakiya Nirman Nigam Limited
Lakshmi
R0
Calculation
Project :
Client :
Design of : Design of Main roof
Designed By :
Reviewed By : Mr. Soumya Ray Approved By : Dr. S. Chatterjee
Revision Status :
Reference Results
Indoor Aquatic Stadium at Saifai district, Etawah
Uttar Pradesh Rajakiya Nirman Nigam Limited
Lakshmi
R0
Calculation
ry 124 mm
rz 325 mm
KL/ry 60.48
KL/rz 23.08
Partial factor of safety (m0) 1.10
b (for Plastic and compact section) 1.00
b 0.86
cl 8.2.2.1 Elastic critical buckling moment (Mcr) 6404 KNm
IS 800:2007 (LT) 0.75
z 0.31
y 0.81
ny 0.04
nz 0.03
ky 1.03
kz 1.00
Klt 0.99
cmy 1.00
cmz 0.60
Design bending compressive stress
LT 0.49
LT 0.91
Xlt 0.70
Table -7 Partial factor of safety (m0) 1.1
IS 800:2007 fbd 221.60 Mpa
Allowable bending in zz (Mdz) 4269 KN-m
Allowable bending in yy (Mdy) 1238 KN-m
Design bending strength by lateral torsional buckling (Mdz) 2253 KN-m
cl 9.3.3.2 Members subjected to both axial and bending
IS 800:2007
0.041790813 + 0.000828393 + 0.756793637
Ratio 0.799
0.029052951 + 0.000497036 + 0.45975710
Ratio 0.489
Unfactored Bending Moment 23 KNm
Partial factor of safety 1.5
Design Moment 34.5 KN-m
Member Size bottom chord
Area 4176 mm2
Zezz 186000 mm3
Fy 250 Mpa
Ymo 1.1
Zreq 126500 mm3 ok
Design of Bending Member
Project :
Client :
Design of : Design of Main roof
Designed By :
Reviewed By : Mr. Soumya Ray Approved By : Dr. S. Chatterjee
Revision
Status :
Reference Results
Section property for I section
400
150
20
16
800
20
D 800 mm
Flange width 400 mm
Thickness of Flange 20 mm
Thickness of Web 16 mm
d 760 mm
Side Plate width 130 mm
Side Plate thickness 20 mm
Section Properties for Plate Girder with web
Elastic Property
Area (A) 38560 mm
2
Distance to NA along y axis 400 mm
Distance to NA along x axis 200 mm
Izz 4066021333 mm
4
Iyy 589379413.3 mm
4
It 4557653.333 mm
4
Zezz 10165053 mm
3
Zeyy 2946897 mm
3
Indoor Aquatic Stadium at Saifai district, Etawah
Uttar Pradesh Rajakiya Nirman Nigam Limited
Lakshmi
R0
Calculation
Project :
Client :
Design of : Design of Main roof
Designed By :
Reviewed By : Mr. Soumya Ray Approved By : Dr. S. Chatterjee
Revision
Status :
Reference Results
Indoor Aquatic Stadium at Saifai district, Etawah
Uttar Pradesh Rajakiya Nirman Nigam Limited
Lakshmi
R0
Calculation
Plastic Property
Upper area (A/2) 19280 mm
2
CG of plastic area from composite centroid in y axis 306.70 mm
CG of plastic area from composite centroid in x axis 96.04 mm
Zpzz 11826400 mm
3
Zpyy 3703360 mm
3
Section Properties for Plate Girder without web
Elastic Property
Area (A) 26400
Distance to NA along y axis 400
Distance to NA along x axis 200
Izz 3480720000
Iyy 589120000
It 3520000
Zezz 8701800 mm
3
Zeyy 1472800 mm
3
Plastic Property
Upper area (A/2) 13200 mm
2
CG of plastic area from composite centroid in y axis 181 mm
CG of plastic area from composite centroid in x axis 96 mm
Zpzz 4778400 mm
3
Zpyy 2534400 mm
3

You might also like