University of Pune

Practical Examination Computer Aided Machine Drawing (202042)

S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.

Knuckle joint assembly

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M



Knuckle joint details

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.







Bushed-pin type flanged coupling





University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.

V block assembly
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.


Cotter joint assembly

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.


Cotter joint with a gib assembly

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.

Split muff coupling assembly

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.

Flange pipe joint assembly & details

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.

Geneva mechanism assembly
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M



Geneva mechanism details

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.


Belt tighter assembly & details

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.


Yoke assembly & details
(Universal Joint)

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.



Plummer block assembly & details

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.

Mounting
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.


Flanged coupling

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.


Foot step bearing

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.

Oldhams coupling

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.


Universal coupling

University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.

Plummer block assembly & details




Body
Keep plate
Piston rod
Brasses
Bolt
Nut
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.




















Base
Cap
Double bearing assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.





End Plate
Disk
Nut
Fixture assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.




Nut
Lock nut
Brasses
Body
Cap
Bolt
Plummer block assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.




Press tool assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.





Pulley
Bushing
Support
Bolt
Pulley support assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.





Bolt
Bracket
Pivot
U-support
Castle nut
Washer
Bushing
Self-locking nut
Shock assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.




Base plate
Support
Wheel
Wheel support
assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures
and assemble them to create Assembly.






Drill jig assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures
and assemble them to create Assembly.


Screw jack assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M


Note : 1) Solve any one from following.
2) Assume suitable data if necessary
Q. Create the models of different Parts as per the dimensions given in following figures and
assemble them to create Assembly.


Clapper tool assembly & details
University of Pune
Practical Examination Computer Aided Machine Drawing (202042)
S.E. Mechanical Engineering
Duration: 02 Hrs. Max. Marks: 50 M





Single tool post assembly & details