LT0375 10M 8/2011 CW

MARSH BELLOFRAM
8019 Ohio River Blvd.
State Route 2, Box 305
Newell, WV 26050

(304) 387-1200
FAX (304) 387-4417
e-mail:
[email protected]

SALES
& APPLICATION
800-727-5646

2012

INDEX
1-4 Quick Selector
Marsh Gauge Selection Made easy!

5-8 Filters Regulators Lubricators

Miniature (M1) & Standard (M2) FRLs, Filters, Regulators, Filter-Regulators, Lubricators (5)

9-15 General Service Gauges

Marshalltown Value Series (9-11) General Service (12-15)

16-21 Severe Service Gauges

40mm & 50mm (16), 63mm Severe Service (17-18), 100mm Severe Service (19-20),
63mm & 100mm Brass Gauges (21)

22-32 Precision Service Gauges

100mm Stainless Steel (22), Quality Series 100mm Stainless Steel Internal (23), Quality Series 100mm
Copper Alloy Internal (24), HW 160mm Stainless Steel (25), 100mm Elite Stainless Steel (26),
Quality (27-28), Test (29-30), Master Test Gauge (31), Inspectors Test (32)

33-36 Process Gauges

37-39 Diaphragm Gauges
Low Pressure (37-38), Vacuum Cleaner Test (39), Gas Pressure Test (39)

40-46 HVAC/R Gauges

Gas Test Gauge (40), Serviceman Test Gauge (41), Manifold Reds & Blues (42), Refrigeration Ammonia (43),
Refrigeration (44), Contractors HVAC (45), Heating System (46)

47-48 Special Application Gauges

Water Test (47), Paper Machine (48)

49 Parts & Accessories

50-52 Diaphragm Seals
Mini, Welded & Removable Diaphragm Seals

53-59 Temperature Instruments

Hot Water Thermometer (53), Bimetal Thermometers (54-55), Pocket Thermometers (56), Industrial Thermometers & Wells (57), Submarine Thermometer (58), Tridicators (59).

60-62 Thermowells
63 Digital Pressure Indicator
64-72 General Information & Reference
Selection and Use of a Pressure Gauge (64), Pressure Gauge Operating Principle (65), How the Diaphragm Gauge Works (65), Marsh Chemical Compatibility Table (66), Accuracy Table (67), Pressure Units
Cross Reference Chart (68), Part Number Prefix Guide (69), Part Number Suffix Guide (69), Abbreviations and Terms Used (69), Marshalltown Crossover Guide (69), Terms & Conditions (70), Distributor
Return Policy (71), Product Classes and Options (71), Product Warnings, Claims, Recommendations and Notices (72).

Quick Selector

PAGE 9

New
Expanded
Offering

PAGE 12

PAGE 16

PAGE 17-20

PAGE 21

GAUGE SERIES:

MARSHALLTOWN
VALUE SERIES

GAUGE SERIES:

GENERAL SERVICE

GAUGE SERIES:

40/50MM LIQUID FILLED

GAUGE SERIES:

SEVERE SERVICE
63MM & 100MM

GAUGE SERIES:

ACCURACY ASME:

Grade B = 3/2/3 (2% of

Grade B = 3/2/3 (2% of
2.5% of range across full
range across middle half of scale) range across middle half of scale) scale

ACCURACY ASME:

ACCURACY ASME:

ACCURACY ASME:

63mm: Grade B =3/2/3

(2% of range across middle half
of scale) 100mm: Grade A 2/1/2
(1% of range across middle half
of scale)

ACCURACY ASME:

CASE SIZE:

112", 2", 212", 312", & 412"

diameter

CASE SIZE:

112", 2", 212", 312", & 412"

diameter

CASE SIZE:

40mm & 50mm

diameter

CASE SIZE:

63mm diameter
100mm diameter

CASE SIZE:

CASE MATERIAL:

Steel. black painted

CASE MATERIAL:

Steel, black painted

CASE MATERIAL:

304 Stainless Steel

CASE MATERIAL:

304 Stainless Steel

CASE MATERIAL:

CASE STYLES:

Lower Mount, Center Back

Mount, U-Clamp, Right & Left
Mounts

CASE STYLES:

Lower Mount, Center Back, UClamp & Front Flange Mounts

CASE STYLES:

Center Back Mount

CASE STYLES:

CASE STYLES:

TUBE & SOCKET:

Copper Alloy

TUBE & SOCKET:

Copper Alloy

TUBE & SOCKET:

Copper Alloy tube with nickel

plated brass socket

TUBE & SOCKET:

Copper Alloy
or 316 Stainless steel

TUBE & SOCKET:

MOVEMENT:
Brass

MOVEMENT:
Brass

MOVEMENT:
Brass

MOVEMENT:
Brass

MOVEMENT:

CONNECTIONS:
8 or 14 NPT

CONNECTIONS:

CONNECTIONS:
40mm: 18 NPT
50mm: 14 NPT

CONNECTIONS:
4 NPT

CONNECTIONS:

RANGES:

15 to 5,000 psi

RANGES:

0-30" Hg vacuum; compound

ranges 30" Hg vacuum to 400
psi; and 15 to 5,000 psi

RANGES:

15 to 160 psi

RANGES:

0-30" Hg vacuum; compound

ranges 30" Hg vacuum to 400
psi; and 15-10,000 psi

RANGES:

STANDARD DIAL:

Dual Scale psi and kPa

STANDARD DIAL:

Dual scale psi and kPa

STANDARD DIAL:

Triple scale psi/BAR/kPa

STANDARD DIAL:

Dual scale psi and kPa

STANDARD DIAL:

DIAL COLOR:

Black markings on white

DIAL COLOR:

Black markings on white

DIAL COLOR:

Black markings on white

DIAL COLOR:

Black markings on white

DIAL COLOR:

POINTER:

Aluminum, black painted

POINTER:

Aluminum, black painted

POINTER:

Aluminum, black painted

POINTER:

Aluminum, black painted

POINTER:

WINDOW:

Flat plastic with steel

friction ring

WINDOW:

112", 2", 212", 312" Acrylic, twistin Clearlok; 412" flat glass window with steel friction ring

WINDOW:
Acrylic

WINDOW:

Polycarbonate

WINDOW:

FILL MEDIUM:
N/A

FILL MEDIUM:
N/A

FILL MEDIUM:
Glycerine

FILL MEDIUM:

Dry, glycerine, or silicone

FILL MEDIUM:

VENT:

VENT:

VENT:

VENT:

VENT:

N/A

8 or 14 NPT

N/A

Filler/Pressure relief plug

63MM & 100MM

BRASS GAUGE
63mm: 1.6% of
range across full scale
100mm: Grade 1A-1% of
range across full scale
63mm diameter (2.5)
100mm diameter (4.0)
Forged brass

Rolled ring, hermetically sealed

Lower mount
case; Lower Mount, Center Back,
U-Clamp & Front Flange Mount

Rubber plug with snip-off

feature

Copper Alloy
Brass

63mm: 14 NPT
100mm: 12 NPT

0 to 30" Hg vacuum; compound

ranges 30" Hg vacuum to 200
psi; 15-10,000 psi
Single scale psi

Black markings on white

Aluminum, black painted
Acrylic

Glycerine

Rubber plug with snip-off

feature

Quick Selector

PAGE 23-24

PAGE 22

New
Expanded
Offering

PAGE 25

PAGE 26

PAGE 27

GAUGE SERIES:

100MM STAINLESS STEEL

GAUGE SERIES:

100MM STAINLESS STEEL

NACE OPTION

GAUGE SERIES:

HW 160MM
STAINLESS STEEL

GAUGE SERIES:

100MM ELITE

GAUGE SERIES:

ACCURACY ASME:

Grade 1A = 1% full scale

ACCURACY ASME:

Grade 1A = 1% full scale

ACCURACY ASME:

Grade 1A = 1% full scale

ACCURACY ASME:

Grade 1A = 1% full scale

ACCURACY ASME:

CASE SIZE:

100mm diameter

CASE SIZE:

100mm diameter

CASE SIZE:

160mm diameter

CASE SIZE:

100mm diameter

CASE SIZE:

CASE MATERIAL:

304 Stainless steel

CASE MATERIAL:

304 Stainless steel

CASE MATERIAL:

304 Stainless steel

CASE MATERIAL:

CASE MATERIAL:

CASE STYLES:

Lower Mount, Panel Mount

with U-Clamp and three hole
Front Flange Mount

CASE STYLES:
Lower Mount

CASE STYLES:
Lower Mount

CASE STYLES:

C A S E S T Y L E S : Lower Mount,

TUBE & SOCKET:

316 Stainless steel

TUBE & SOCKET:

316 Stainless steel

TUBE & SOCKET:

316 Stainless steel with

socket welded to the case

TUBE & SOCKET:

MOVEMENT:

Stainless steel

MOVEMENT:

Stainless steel

MOVEMENT:

Stainless steel

MOVEMENT:

MOVEMENT:

CONNECTIONS:
4 NPT

CONNECTIONS:
4 or 12 NPT

CONNECTIONS:
2 NPT

CONNECTIONS:
2 NPT

CONNECTIONS:

RANGES:

30-10,000 PSI

RANGES:

15-20,000 PSI

RANGES:

15-20,000 PSI

RANGES:

0-30" Hg vacuum
30-10,000 PSI

RANGES:

STANDARD DIAL:

Dual scale PSI and kPa

STANDARD DIAL:

Dual scale PSI and kPa

STANDARD DIAL:

Dual scale PSI and kPa

STANDARD DIAL:

Dual scale psi and kPa

STANDARD DIAL:

DIAL COLOR:

Black markings on white

DIAL COLOR:

Black markings on white

DIAL COLOR:

Black markings on white

DIAL COLOR:

Black markings on white

DIAL COLOR:

POINTER:

Aluminum, black painted

POINTER:

Aluminum, Adjustable
Micrometer, black painted

POINTER:

Aluminum, black painted

POINTER:

Aluminum, black painted

POINTER:

WINDOW:
Acrylic

WINDOW:

Safety glass

WINDOW:

Safety glass

WINDOW:

Safety glass

WINDOW:

FILL MEDIUM:

Dry, glycerine or silicone

FILL MEDIUM:

Dry, glycerine, or silicone

FILL MEDIUM:

Dry, glycerine, or silicone

FILL MEDIUM:

Dry, glycerine or silicone

FILL MEDIUM:

VENT:

VENT:

VENT:

VENT:

VENT:

Rubber plug with snip-off

feature

Rubber plug with snip-off

feature

Rubber plug with snip-off

feature

304 Stainless steel

Safecase with blow-out
back construction;
Lower Mount
316 Stainless steel

QUALITY GAUGE
Grade A = 2/1/2 (1% of
range across middle half of scale)

312" and 414" diameter

Steel, black painted

Flush case (Front Flange w/UClamp), Back Flange with Lower or
Lower Back Mounts

T U B E : Copper Alloy up to 1,000

psi. Stainless steel tube, above
1,000 psi
S O C K E T : Copper Alloy

Stainless steel rotary movement Stainless steel

1

Internal compensating
diaphragm

4 or 12 NPT

0-30" Hg vacuum; compound

ranges 30" Hg vacuum to 300 PSI;
15-20,000 PSI
Single scale PSI

Black markings on white

312": Aluminum, black painted with
recalibrator. 412": Aluminum, black
painted, micro-adjustable
Glass
N/A
N/A

Quick Selector

PAGE 31

PAGE 29
GAUGE SERIES:
TEST GAUGE

GAUGE SERIES:

MASTER TEST GAUGE

PAGE 32
GAUGE SERIES:

PAGE 37

PAGE 33-36
GAUGE SERIES:

INSPECTORS TEST GAUGE PROCESS GAUGE

GAUGE SERIES:

DIAPHRAGM GAUGE

Grade 2A = 0.50% full scale Grade 3A = 0.25% full scale Grade 2A = 0.50% full scale Grade 2A = 0.50% full scale Grade A = 2/1/2 (1% of
range across middle half of scale)
and Grade B = 3/1/3 (2% of
range for ranges below 30" H2O)

ACCURACY ASME:

ACCURACY ASME:

ACCURACY ASME:

ACCURACY ASME:

ACCURACY ASME:

CASE SIZE:

412" diameter

CASE SIZE:

6" diameter

CASE SIZE:

3" diameter

CASE SIZE:

412" and 6" diameter

CASE SIZE:

CASE MATERIAL:

Steel, black painted

CASE MATERIAL:

304 Stainless steel

CASE MATERIAL:

Brass, nickel plated

CASE MATERIAL:

Safecase polypropylene
(turret style only) & aluminum

CASE MATERIAL:

CASE STYLES:

Lower Mount, Flush Mount

(Front Flange with U-clamp &
hinged ring)

CASE STYLES:
Lower Mount

CASE STYLES:
Lower Mount

CASE STYLES:

Turret, Back Flange case,

Front Flange Mount, Lower
or Lower Back Mount

CASE STYLES:

TUBE & SOCKET:

Copper Alloy or
316 Stainless steel

TUBE & SOCKET:

Copper Alloy

TUBE & SOCKET:

Copper Alloy

TUBE & SOCKET:

Copper Alloy or
316 Stainless steel

TUBE & SOCKET:

MOVEMENT:

Stainless steel

MOVEMENT:

Stainless steel

MOVEMENT:
Brass

MOVEMENT:

Stainless steel

MOVEMENT:

CONNECTIONS:
4 or 12 NPT

CONNECTIONS:
4 or 12 NPT

CONNECTIONS:
4 NPT

CONNECTIONS:

CONNECTIONS:

RANGES:

0 to 30" Hg vacuum; compound 0 to 30" Hg vacuum;

ranges 30" Hg vacuum to 300 compound ranges
psi; 15-10,000 psi
30" Hg vacuum to 300 psi;
15-10,000 psi

RANGES:

RANGES:

0 to 30" Hg vacuum;
15 to 1,000 psi

RANGES:

STANDARD DIAL:
Single scale psi

STANDARD DIAL:
Single scale psi

STANDARD DIAL:

Dual scale psi and kPa

STANDARD DIAL:
Single scale psi

H2O & kPa, psi & kPa, or Triple

scale oz/in2 in. H2O, & kPa

DIAL COLOR:

Black markings on white with

mirrored dial to avoid parallax

DIAL COLOR:

Black markings on white with

mirrored dial to avoid parallax

DIAL COLOR:

Black markings on white

DIAL COLOR:

Black markings on white

DIAL COLOR:

POINTER:

Aluminum, black painted, microadjustable, knife-edge

POINTER:

Aluminum, black painted,

knife-edge

POINTER:

Aluminum, black painted,

knife-edge

POINTER:

POINTER:

WINDOW:
Glass

WINDOW:
Glass

WINDOW:

Beveled glass

WINDOW:

W I N D O W : 212" & 312": Acrylic

FILL MEDIUM:
N/A

FILL MEDIUM:
N/A

FILL MEDIUM:
N/A

FILL MEDIUM:

Dry, glycerine, or silicone

FILL MEDIUM:

VENT:

VENT:

VENT:

VENT:

VENT:

Blowout plug

Blowout plug

N/A

4 or 12 NPT

0 to 30" Hg vacuum;
compound 30" Hg vacuum
to 300 psi; 15 to 20,000 psi

Aluminum, black painted,

micro-adjustable
Acrylic

212", 312", & 412" diameter

Steel, black painted
Lower Mount, Center Back,
U-Clamp & Front Flange Mount
Phosphor bronze diaphragm softsoldered to brass socket

Brass sector and pinion

8 or 14 NPT and special connections

R A N G E S : Dual scale with kPa; 0

to 200" H20 vacuum; 0 to 300"
H20, 0 to 10 psi, 0 to 160 oz/in2.
Triple scale 0-58 oz/in2, inches
H20 & kPa

S T A N D A R D D I A L : Dual scale in.

Black markings on white

Aluminum, black painted

twist-in Clearlok 412": Flat acrylic

with steel friction ring

N/A

Internal compensating diaphragm N/A

Quick Selector

PAGE 48

PAGE 40

PAGE 39

PAGE 54

GAUGE SERIES:

GAS PRESSURE TEST SET

VACUUM TEST SET

GAUGE SERIES:

GAS TEST GAUGES

GAUGE SERIES:

PAPER MACHINE GAUGE

GAUGE SERIES:

ACCURACY ASME:

Grade A=2/1/2 ( 1% of range

across middle half of scale) and Grade
B=3/1/3% for ranges (below 30"
H2O)

ACCURACY ASME:

Grade B 3/2/3% (2% of range

across middle half of scale)

ACCURACY ASME:

Grade A = 2/1/2 (1% of range

across middle half of scale)

ACCURACY ASME:

CASE SIZE:
212"

CASE SIZE:

2" Diameter

CASE SIZE:

312" diameter

CASE SIZE:

CASE MATERIAL:

CASE MATERIAL:

CASE MATERIAL:

Steel, chrome plated

CASE MATERIAL:

CASE STYLES:

Mounting-Reducing Bell or Hex Style

Housing Material-Reducing Bell: Iron, Black
Painted Hex Body: Steel, Zinc Dichromate
Plated

CASE STYLES:

CASE STYLES:

TUBE & SOCKET:

Phosphor bronze diaphragm soft-soldered to brass socket

TUBE & SOCKET:

Copper Alloy

TUBE & SOCKET:

TUBE & SOCKET:

MOVEMENT:

MOVEMENT:
Brass

MOVEMENT:

M O V E M E N T : Bimetal sensing element

CONNECTIONS:

CONNECTIONS:
4 NPT

CONNECTIONS:

RANGES:

30 to 1,000 psi

RANGES:

Provided in grey polyethylene case with Steel, black painted

3 ft. of rubber tubing

Brass sector and pinion

RANGES:

1% of span

2", 3" & 5", standard stem lengths of

212" to 24"
304 Stainless steel

Lower Back Mount; Hinged

Hermetically sealed;
ring case & moisture-proof with weep Center Back or Adjustable
hole
Copper Alloy

Stainless steel

4 NPTF

BIMETAL THERMOMETERS

304 Stainless steel stems

with external reset feature

4 NPT (2" case only); 12 NPT

(3" & 5" cases)

0 to 8.75 oz/in2
0 to 20 oz/in2
0 to 58 oz/in2

RANGES:

STANDARD DIAL:

Triple scale oz/in2, in. H2O,

& kPa

STANDARD DIAL:
Single Scale psi

STANDARD DIAL:
Single scale psi

STANDARD DIAL:

DIAL COLOR:

Black markings on white

DIAL COLOR:

Black markings on white

DIAL COLOR:

Black markings on white

DIAL COLOR:

POINTER:

Aluminum, black painted

POINTER:

Aluminum, black painted

POINTER:

Aluminum, black painted with recalibrator

POINTER:

WINDOW:

WINDOW:

WINDOW:

WINDOW:

Acrylic, twist-in Clearlok

Bell Type

0-15 psi
0-30 psi
0-60 psi
0-100 psi

Polycarbonate

Hex Type

0-15 psi
0-30 psi
0-60 psi
0-100 psi

Glass lens, chrome plated

brass ring with weather-tight seal

11 dual scale ranges from

-50 F through 1000F
(-50 C through 550 C)

Dual scale in degrees Celsius &

Fahrenheit
Black markings on white
Aluminum, black painted
Glass

FRLs

FILTERS

Port Size
Filtration (micron)
Maximum Supply Pressure
Temperature Range
Drain
Bowl Capacity
Flow (based on 100 psi inlet pressure
with 50 micron filter)

REGULATORS

Effect of Supply Pressure variation

(25 psig) on Outlet Pressure
Exhaust Capacity (5 psig above
20 psig set point)
Max. Supply Pressure
Flow Capacity at 100 psig (6.9 BAR)
supply and 70 psig (4.8 BAR) outlet
Output Pressure Ranges
Total Air Consumption
@ Maximum Output
Port Size
Mounting Options

FILTER-REGULATORS

Port Size
Filtration (micron)
Maximum Supply Pressure
Temperature Range
Drain
Bowl Capacity
Regulator Output Range
Flow (based on 100 psi supply/70 psi out)

LUBRICATORS

Port Size
Lubrication
Maximum Supply Pressure
Temperature Range
Bowl Capacity
Flow (based on 100 psi inlet pressure)

TYPE M1MINI

TYPE M2STANDARD

8, 14 NPT
5, 25, 50
1.0 MPa
10 BAR
145 psi
41140 F / 560 C
Manual / Semi-Auto
0.75 inch3

4, 38, 12 NPT
5, 25, 50
1.0 MPa
10 BAR
145 psi
41140 F / 560 C
Manual / Semi-Auto / Auto
2.75 inch3

< 0.2 psig

(13.8 mBAR)
<0.25 SCFM
(<7 LPM)
145 psig (10 BAR)

< 0.2 psig

(13.8 mBAR)
<0.25 SCFM
(<7 LPM)
145 psig (10 BAR)

55, 85 SCFM

40, 60 SCFM

120, 120, 120 SCFM

90, 120, 120 SCFM

0-10 psig (0-0.69 BAR)

0-30 psig (0-2.1 BAR)
0-60 psig (0-4.1 BAR)
0-120 psig (0-8.3 BAR)

0-10 psig (0-0.69 BAR)

0-30 psig (0-2.1 BAR)
0-60 psig (0-4.1 BAR)
0-120 psig (0-8.3 BAR)

8, 4 NPT
Pipe, Panel or Bracket

4, 38, 12 NPT
Pipe, Panel or Bracket

1
8, 14 NPT
5, 25, 50
1.0 MPa
10 BAR
145 psi
41140 F / 560 C
Manual / Semi-Auto
0.75 inch3
0-10, 0-30, 0-60, 0-120 psi
40, 60 SCFM

1
4, 38, 12 NPT
5, 25, 50
1.0 MPa
10 BAR
145 psi
41140 F / 560 C
Manual / Semi-Auto / Auto
2.75 inch3
0-10, 0-30, 0-60, 0-120 psi
90, 120, 120 SCFM

8, 14 NPT
Mist
1.0 MPa
10 BAR
145 psi
41140 F / 560 C
1.22 inch3
55, 115 SCFM

4, 38, 12 NPT
Mist
1.0 MPa
10 BAR
145 psi
41140 F / 560 C
5.18 inch3
125, 125, 125 SCFM

0.3 SCFH (0.14 LPM)

1

0.3 SCFH (0.14 LPM)

1

FRLs

FRL FEATURES

Modular design for service

& interchangeability
Miniature (M1), Standard (M2)
Small package size and light
weight construction
Competitively priced

FILTERS

M1 has polycarbonate bowl,

M2 have polycarbonate bowl
with metal guard
STOCK ELEMENTS - 5, 25 or 50
micron
Manual, semi-auto or auto drain
available

REGULATORS

Bellofram Rolling Diaphragm for

superior regulator performance
Panel, pipe, or bracket (included)
mounting
Metal body, polycarbonate
bonnet and knob
Non-rising adjustment knob with
push-pull lock ring feature

FILTER REGULATORS

Aluminum and polycarbonate

construction
Manual, semi-auto or autodrain
available
M1 has polycarbonate bowl;
M2 has polycarbonate bowl with
metal guard
Non-rising adjustment knob with
push-pull lock ring feature
For panel or bracket mounting
Bellofram Rolling Diaphragm for
superior regulator performance

LUBRICATORS

M1 has polycarbonate bowl;

remove bowl for filling.
M2 has polycarbonate bowl with
metal guard; top plug permits filling without removing bowl or
shutting off air
Adjust drip rate by hand, using
graduated ring on M1, with screwdriver on M2

FRL ORDERING INFORMATION

SIZE
Miniature Series
Standard Series
DESCRIPTION
Filter
Regulator
Lubricator
Filter Regulator
Filter Regulator
PLUS Lubricator
Filter, Regulator,
Lubricator
PORT SIZE
1
8 NPT (M1 only)
1
4 NPT
3
8 NPT (M2 only)
1
2 NPT (M2 only)
PRESSURE RANGES
0-10 psi
0-30 psi
0-60 psi
0-120 psi, Standard
Omit for Filters & Lubricators

M1
M2
F
R
L
FR
FRP
FRL

1N
2N
3N
4N
A
L
M
H

FILTERS
50 Micron Filter,
C
Standard
25 Micron Filter
B
5 Micron Filter
F
Omit for Regulators & Lubricators

DRAIN
Manual Drain, Standard
M
Semi-Automatic Drain
S
Auto Drain (M2 only)
A
Omit for Regulators & Lubricators

NOTE: Individual regulators,

FRs, filters, and lubricators
come complete with bracket .
FRL assemblies come complete with all bracket/connectors.

FRLs
146
5.76

1/8 NPT
1/4 NPT

50
1.97

1/8 NPT

30.5
1.2

37
1.46
24
0.95

129.5
5.10
5
0.21

5.6
.22

5.6
.22

FRL

FRL
side
view
FilterRegulator

1/8 NPT
1/4 NPT
Gauge
Port
1/8 NPT

24.0
0.95

IN

10
.394

Regulator
89
3.50

1/8 NPT

21
0.83

FRL
side
view

42.0
1.65

40
1.57

IN

129.5
5.10

Filter

1/8" NPT
1/4" NPT
42
1.645

30.5

TYPE M1

Lubricator

Weight: 1 lb.

TYPE M2

Gauge
Port
1/8 NPT

161.5
6.36
102.5
4.035

1/8
NPT
Gauge
Port

1/8 NPT
1/4 NPT

1/8 NPT
1/4 NPT

40
1.57
ALL DIMENSIONS ARE NOMINAL

Weight: 2 lb.
213
8.39

1/8 NPT
Gauge
Port

FRL
side
view

1/4 NPT
3/8 NPT
1/2 NPT

45
1.77

98
3.86
98
3.86

54
2.13

181
7.13

54.2
2.13

7
0.28

7
0.28

IN

1/4 NPT
3/8 NPT
1/2 NPT

FRL
side
view

64
2.52

1/8 NPT
Gauge
Port

239.5
9.43
IN

1/8 NPT
Gauge
Port

239.5
9.43

1/4 NPT
3/8 NPT
1/2 NPT

FRL
44.5
1.75

1/4 NPT
3/8 NPT
1/2 NPT

63
2.48

Filter Regulator

16
.63

Regulator
140
5.53

150
5.93

1/8 NPT

Lubricator

1/8 NPT
Gauge
Pot

32
1.26
63
2.48

63
2.48

1/4 NPT
3/8 NPT
1/2 NPT

181
7.13

Filter
7

FRLs

M1 & M2: REGULATED PRESSURE VS. FLOW

REPLACEMENT PARTS

Description
Miniature Size Connector Kit
Miniature Size Connector Kit
Standard Size Connector Kit
Standard Size Connector Kit

FR+L
FR+L

Miniature Size Filter or Lubricator Bracket

Standard Size Filter or Lubricator Bracket
Miniature Size Regulator or Filter Regulator Bracket
Standard Size Regulator or Filter Regulator Bracket

Model #
M1K
M1K2
M2K
M2K2

M1FB
M2FB
M1RB
M2RB

Description
Miniature 5 micron Filter Element
Miniature 25 micron Filter Element
Miniature 50 micron Filter Element
Standard 5 micron Filter Element
Standard 25 micron Filter Element
Standard 50 micron Filter Element

Miniature Bowl / Manual Drain Assembly

Miniature Bowl / Semi-Automatic Drain Assembly
Standard Bowl / Manual Drain Assembly
Standard Bowl / Semi-Automatic Drain Assembly
Standard Bowl / Automatic Drain Assembly
Pressure Gauges - GG Series Gauges pg. 9

Model #
M1FK05
M1FK25
M1FK50
M2FK05
M2FK25
M2FK50

M1DM
M1DSA
M2DM
M2DSA
M2DA

General Service
MARSHALLTOWN VALUE SERIES GAUGE
ASME Grade B Accuracy
Extra Savings with Quantity Pricing
5 Standard Mounting Options: LM, CB, UC, Right & Left

Marshalltown Value Series are the most economical, general purpose gauges in the Marsh gauge line. Suited for use
with water, oil, air, gas, or other non-corrosive media.
Typical applications include FRLs, compressors, pumps, boilers, regulators, dryers as well as commercial and industrial equipment.

New Expanded
Ranges and Sizes!

STANDARD RANGES & PART NUMBERS

TYPE

Size
Mounting
Connection
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi

MARSHALLTOWN VALUE SERIES GAUGES

LM
1
8 NPT
GG1515L8
GG1530L8
GG1560L8
GG15100L8
GG15160L8
GG15200L8
GG15300L8
GG15400L8
GG15600L8
GG151000L8

UC
1
8 NPT
GG1515U8
GG1530U8
GG1560U8
GG15100U8
GG15160U8
GG15200U8
GG15300U8
GG15400U8
GG15600U8
GG151000U8

112"
CB
1
8 NPT
GG1515C8
GG1530C8
GG1560C8
GG15100C8
GG15160C8
GG15200C8
GG15300C8
GG15400C8
GG15600C8
GG151000C8

Right
1
8 NPT

Left
1
8 NPT

GG1530G8
GG1560G8

GG1530F8
GG1560F8

SPECIFICATIONS
ACCURACY

ASME Grade B = 3/2/3% (2%

of range across middle half of scale)

CASE SIZES

1 12" and 2" diameter

CASE MATERIAL

Steel, black painted

CASE STYLE

CB Center Back Mount

LM Lower Mount
UC U-Clamp Mount
Right Mount
Left Mount

TUBE & SOCKET

Copper alloy

MOVEMENT
TYPE

Size
Mounting
Connection
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi

MARSHALLTOWN VALUE SERIES GAUGES

LM
1
8 NPT
GG2015L8
GG2030L8
GG2060L8
GG20100L8
GG20160L8
GG20200L8
GG20300L8
GG20400L8
GG20600L8
GG201000L8
GG201500L8
GG202000L8
GG203000L8
GG205000L8

LM
1
4 NPT
GG2015L4
GG2030L4
GG2060L4
GG20100L4
GG20160L4
GG20200L4
GG20300L4
GG20400L4
GG20600L4
GG201000L4
GG201500L4
GG202000L4
GG203000L4
GG205000L4

CB
1
8 NPT
GG2015C8
GG2030C8
GG2060C8
GG20100C8
GG20160C8
GG20200C8
GG20300C8
GG20400C8
GG20600C8
GG201000C8
GG201500C8
GG202000C8
GG203000C8
GG205000C8

Brass
2"

CONNECTION
8 & 14 NPT

CB
1
4 NPT
GG2015C4
GG2030C4
GG2060C4
GG20100C4
GG20160C4
GG20200C4
GG20300C4
GG20400C4
GG20600C4
GG201000C4
GG201500C4
GG202000C4
GG203000C4
GG205000C4

UC
1
8 NPT
GG2015U8
GG2030U8
GG2060U8
GG20100U8
GG20160U8
GG20200U8
GG20300U8
GG20400U8
GG20600U8
GG201000U8
Special Order
Special Order
Special Order
Special Order

UC
1
4 NPT
GG2015U4
GG2030U4
GG2060U4
GG20100U4
GG20160U4
GG20200U4
GG20300U4
GG20400U4
GG20600U4
GG201000U8
GG201500U4
GG202000U4
GG203000U4
GG205000U4

RANGES

15 to 5,000 psi

DIAL STANDARD

Dual scale psi and kPa

DIAL COLOR

Black markings on white

POINTER

Aluminum, Black painted

WINDOW

Flat plastic with steel friction ring

WEIGHT
1-1/2
2
2-1/2
3-1/2
4-1/2

0.2 lb.
0.3 lb.
0.4 lb.
0.5 lb.
0.75 lb.

General Service
STANDARD RANGES & PART NUMBERS

TYPE

Size
Mounting
Connection
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000psi
0 to 5,000psi

TYPE

Size
Mounting
Connection
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000psi
0 to 5,000psi

10

MARSHALLTOWN VALUE SERIES GAUGES

LM
8 NPT
GG2530L8
GG2560L8
GG25100L8
GG25160L8
GG25200L8
GG25300L8
GG25400L8
GG25600L8
GG251000L8
GG251500L8
GG252000L8
GG253000L8
GG255000L8
1

LM
4 NPT
GG2530L4
GG2560L4
GG25100L4
GG25160L4
GG25200L4
GG25300L4
GG25400L4
GG25600L4
GG251000L4
GG251500L4
GG252000L4
GG253000L4
GG255000L4
1

CB
8 NPT
GG2530C8
GG2560C8
GG25100C8
GG25160C8
GG25200C8
GG25300C8
GG25400C8
GG25600C8
GG251000C8
GG251500C8
GG252000C8
GG253000C8
GG255000C8
1

MARSHALLTOWN VALUE SERIES GAUGES

LM
1
4 NPT
GG3530L4
GG3560L4
GG35100L4
GG35160L4
GG35200L4
GG35300L4
GG35400L4
GG35600L4
GG351000L4
GG351500L4
GG352000L4
GG353000L4
GG355000L4

312"
CB
1
4 NPT
GG3530C4
GG3560C4
GG35100C4
GG35160C4
GG35200C4
GG35300C4
GG35400C4
GG35600C4
GG351000C4
GG351500C4
GG352000C4
GG353000C4
GG355000C4

212"

CB
4 NPT
GG2530C4
GG2560C4
GG25100C4
GG25160C4
GG25200C4
GG25300C4
GG25400C4
GG25600C4
GG251000C4
GG251500C4
GG252000C4
GG253000C4
GG255000C4
1

TYPE
UC
1
4 NPT
GG3530U4
GG3560U4
GG35100U4
GG35160U4
GG35200U4
GG35300U4
GG35400U4
GG35600U4
GG351000U4
GG351500U4
GG352000U4
GG353000U4
GG355000U4

Size
Mounting
Connection
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000psi
0 to 5,000psi

UC
8 NPT
GG2530U8
GG2560U8
GG25100U8
GG25160U8
GG25200U8
GG25300U8
GG25400U8
GG25600U8
GG251000U8
GG251500U8
Special Order
Special Order
Special Order
1

MARSHALLTOWN

UC
4 NPT
GG2530U4
GG2560U4
GG25100U4
GG25160U4
GG25200U4
GG25300U4
GG25400U4
GG25600U4
GG251000U4
GG251500U4
GG252000U4
GG253000U4
GG255000U4

412"
LM
1
4 NPT
GG4530L4
GG4560L4
GG45100L4
GG45160L4
GG45200L4
GG45300L4
GG45400L4
GG45600L4
GG451000L4
GG451500L4
GG452000L4
GG453000L4
GG455000L4

General Service
DIMENSIONS
Part Number

Dial Size

GG15XXXXC8

1.5"

GG15XXXXL8

GG15XXXXU8
GG20XXXXL8

GG20XXXXC8

GG20XXXXU8
GG20XXXXL4

GG20XXXXC4

GG20XXXXU4
GG25XXXXL8

GG25XXXXC8

GG25XXXXU8
GG25XXXXL4

GG25XXXXC4

GG25XXXXU4
GG35XXXXL4

GG35XXXXC4

GG35XXXXU4
GG45XXXXL4

1.5"
1.5"

Mount

1.606

1/8" UC

1.606

1/8" CB

2.047

1/8" CB

2.0"

1/8" LM

2.0"

1/8" UC

2.0"

1/8" LM

1.57

2.047
1.97

2.0"

1/4" LM

2.047

2.0"

1/4" UC

1.97

2.0"

1/4" CB

2.047

2.5"

1/8" LM

2.496

2.5"

1/8" UC

2.55

2.5"

1/8" CB

2.496

2.5"

1/4" LM

2.496

2.5"

1/4" UC

2.55

2.5"
3.5"
3.5"
3.5"
4.5"

1/4" CB

1/4" LM
1/4" CB

1/4" UC

1/4" LM

2.496
3.488
3.488
3.75

4.941

B
1.86
2.24
2.24
2.55
2.55
3.96

0.92

1.61

0.89
0.89

1.122
1.122
1.01

1.122
1.022
1.01

1.134
1.134
0.97

1.134
1.122
0.97
1.22
1.22
0.99

1.142

0.61
0.64
0.64
0.74
0.74
0.66
0.74
0.771
0.74
0.86
0.71

1.488
1.787
1.787
1.961
1.961
2.717
3.409

0.433
0.433
0.433
0.534
0.534
0.534
0.551
0.534
0.534
0.539
0.543
0.543
0.543
0.543
0.543
0.543
0.543
0.543
0.551

0.296
0.376
.0385
0.388
0.39
0.413
0.394

0-0.25

1.05

0.16

0.52

0-0.26

1.15

0.16

0.52

0-0.26

1.15

0.16

0.52

0-0.24

1.18

0.23

0.52

0-0.24

1.18

0.23

0.52

0-0.37

1.2

0.73

11

General Service
GENERAL SERVICE GAUGE
Dial Sizes: 1 12", 2", 2 12", 3 12" & 4 12"
Superb quality, economical price
Pressure ranges to 5000 psi

Marsh Instruments General Service Steel Case Gauges are an economical, general purpose gauge for pressure
measurement from vacuum/compound through 5,000 psi. Suited for use with water, oil, air, gas, or other
non-corrosive media.
Typical applications include FRLs, compressors, pumps, boilers, regulators, dryers as well as commercial and
industrial equipment.

SPECIFICATIONS
ACCURACY

ASME Grade B3/2/3% (2% of

range across middle half of scale)

CASE SIZES

1 12", 2", 2 12", 3 12", 4 12" diameter

CASE MATERIAL

Steel, black painted

CASE STYLE
CB Center Back Mount
LM Lower Mount
UC U-Clamp Mount
See option tables for Front Flange

TUBE & SOCKET

Copper alloy

MOVEMENT
Brass

CONNECTION
8 & 14 NPT

RANGES

0 to 30" Hg VAC; Compound 30"

Hg vac to 400 psi; 15 to 5,000 psi

DIAL STANDARD

Dual scale psi and kPa

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted

WINDOW

1 12", 2", 2 12", 3 12": acrylic,

twist-in Clearlok
4 12": flat glass window with steel
friction ring

RESTRICTOR

Standard for ranges 1,000 psi and

above

WEIGHT
1-1/2
2
2-1/2
3-1/2
4-1/2

12

0.2 lb.
0.3 lb.
0.4 lb.
0.5 lb.
0.75 lb.

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 15 psi
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
30" Hg VAC to 100 psi
30" Hg VAC to 150 psi
30" Hg VAC to 200 psi
30" Hg VAC to 300 psi
30" Hg VAC to 400 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi

NOTE:

GENERAL SERVICE GAUGES

112"
Steel
Copper Alloy
LM
UC
1
1
8 NPT
8 NPT
psi/kPa
J0405
J0505
J0410
J0510
J0412
J0512
J0414
J0514
J0416
J0516
J0418
J0518
J0420
J0520
J0424
J0524

J0605
J0610
J0612
J0614
J0616
J0618
J0620
J0624

J0440
J0442
J0446
J0448
J0452
J0454
J0458
J0460
J0464
J0472
J0474
J0476
J0478
J0482

J0640
J0642
J0646
J0648
J0652
J0654
J0658
J0660
J0664
J0672
J0674
J0676
J0678
J0682

J1105
J1110
J1112
J1114
J1116
J1118
J1120
J1124
J1126
J1140
J1142
J1146
J1148
J1152
J1154
J1158
J1160
J1164
J1172
J1174
J1176
J1198
J1182

J0540
J0542
J0546
J0548
J0552
J0554
J0558
J0560
J0564
J0572
J0574
J0576
J0578
J0582

CB
8 NPT

LM
8 NPT

2"
Steel
Copper Alloy
LM
CB
1
1
4 NPT
8 NPT
psi/kPa
J1405
J1805
J1410
J1810
J1412
J1812
J1414
J1814
J1416
J1816
J1418
J1818
J1420
J1820
J1424
J1824
J1426
J1826
J1440
J1840
J1442
J1842
J1446
J1846
J1448
J1848
J1452
J1852
J1454
J1854
J1458
J1858
J1460
J1860
J1464
J1864
J1472
J1872
J1474
J1874
J1476
J1876
J1478
J1878
J1482
J1882

Items are available on special order. However, minimums and lead times apply. Consult factory.

CB
4 NPT

J2005
J2010
J2012
J2014
J2016
J2018
J2020
J2024
J2026
J2040
J2042
J2046
J2048
J2052
J2054
J2058
J2060
J2064
J2072
J2074
J2076
J2078
J2082

General Service

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 15 psi
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
30" Hg VAC to 100 psi
30" Hg VAC to 150 psi
30" Hg VAC to 200 psi
30" Hg VAC to 300 psi
30" Hg VAC to 400 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi

NOTE:

GENERAL SERVICE GAUGES

2"
Steel
Copper Alloy
UC
UC
1
8 NPT 14 NPT
psi/kPa
J2405 J2605
J2410 J2610
J2412 J2612
J2414 J2614
J2416 J2616
J2418 J2618
J2420 J2620
J2424 J2624
J2426 J2626
J2440 J2640
J2442 J2642
J2446 J2646
J2448 J2648
J2452 J2652
J2454 J2654
J2458 J2658
J2460 J2660
J2464 J2664
J2472 J2672
J2474 J2674
J2476 J2676
J2478 J2678
J2482 J2682

LM
8 NPT

LM
4 NPT

J4005
J4010
J4012
J4014
J4016
J4018
J4020
J4024
J4026
J4040
J4042
J4046
J4048
J4052
J4054
J4058
J4060
J4064
J4072
J4074
J4076
J4078
J4082

J4605
J4610
J4612
J4614
J4616
J4618
J4620
J4624
J4626
J4640
J4642
J4646
J4648
J4652
J4654
J4658
J4660
J4664
J4672
J4674
J4676
J4678
J4682

2 12"
Steel
Copper Alloy
CB
CB
1
8 NPT 14 NPT
psi/kPa
J5005 J5405
J5010 J5410
J5012 J5412
J5014 J5414
J5016 J5416
J5018 J5418
J5020 J5420
J5024 J5424
J5026 J5426
J5440
J5042 J5442
J5046 J5446
J5048 J5448
J5052 J5452
J5054 J5454
J5058 J5458
J5060 J5460
J5064 J5464
J5072 J5472
J5074 J5474
J5076 J5476
J5078 J5478
J5082 J5482

UC
8 NPT

UC
4 NPT

LM
4 NPT

J6005
J6010
J6012
J6014
J6016
J6018
J6020
J6024
J6026

J6205
J6210
J6212
J6214
J6216
J6218
J6220
J6224
J6226
J6240
J6242
J6246
J6248
J6252
J6254
J6258
J6260
J6264
J6272
J6274
J6276
J6278
J6282

J8005
J8010
J8012
J8014
J8016
J8018
J8020
J8024
J8026
J8040
J8042
J8046
J8048
J8052
J8054
J8058
J8060
J8064
J8072
J8074
J8076
J8078
J8082

J6042
J6046
J6048
J6052
J6054
J6058
J6060
J6064
J6072
J6074
J6076
J6078
J6082

3 12"
Steel
Copper Alloy
CB
UC
1
4 NPT 14 NPT
psi/kPa
J8605 J8805
J8610 J8810
J8612 J8812
J8614 J8814
J8616 J8816
J8618 J8818
J8620 J8820
J8624 J8824
J8626 J8826
J8640 J8840
J8642 J8842
J8646 J8846
J8648 J8848
J8652 J8852
J8654 J8854
J8658 J8858
J8660 J8860
J8664 J8864
J8672 J8872
J8674 J8874
J8676 J8876
J8678 J8878
J8682 J8882

4 12"
Steel
LM
4 NPT
psi/kPa
J9005
J9010
J9012
J9014
J9016
J9018
J9020
J9024
J9026
J9040
J9042
J9046
J9048
J9052
J9054
J9058
J9060
J9064
J9072
J9074
J9076
J9078
J9082
1

Items are available on special order. However, minimums and lead times apply. Consult factory.

13

General Service

Dial Divisions
Ranges
Vacuum
COMPOUND
30" Hg VAC to
15 psi
30" Hg VAC to
30 psi
30" Hg VAC to
60 psi
30" Hg VAC to
150 psi
30" Hg VAC to
300 psi
PRESSURE
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
HIGH PRESSURE
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 4,000 psi
0 to 5,000 psi

14

General Service
3/2/3% of Span

Minor
Figure
Gradua
Intervals
-tions
5
1
10

10

10

10

10

30

30

30

50

10

3
5
10
10
20
50
50
50
50

0.2
1
1
2
2
4
5
5
10

200
300
400
500
1,000
1,000

20
20
40
100
100
100

GENERAL SERVICE GAUGE OPTIONS

OPTION

Restrictors

TYPE

Add restrictor
psi only

bar only
Catalog Dials

Custom Dials
Window
Pointer
Increased Accuracy
Cases

L3

MPa only
psi & MPa

L4

Custom face
Instrument glass w/ring (GS)
Acrylic
Adjustable (slotted) pointer (AD)
Max. Hand Assembly (MX)
Grade A: (2/1/2%)

3 hole front flange (FF)

W1

See Marsh Price List for minimums

W2
W4
M
F1
F2
Z1
Z2
B

See Marsh Price List for minimums

112"- 312" Consult factory for availability
412" Consult factory for availability
2"- 412" Consult factory for availability
2"- 312" CB or LM only,
Consult factory for availability
All models - 10 piece minimum order
112" - 312" See below for part number

J2

Consult factory for availability

A1

112" to 312" CB or LM only

Friction ring (external), black

(FB)

A2

112" to 312" CB or LM only

Press ring, chrome (PC)

A4

2" to 312" [Panel mount]

Friction ring (external),

Polished stainless steel (FC)

Press ring, black (PB)

Special Connections

All models Consult factory for other sizes

Part Numbers: 112"x 18" (J07XX), 2"x 18" (J25XX), 2"x 14" (J29XX), 212" x 18" (J61XX), 212"x
1
4" (J63XX), 312"x 18" (J85XX), 312"x 14" (J89XX).
Consult factory for availability.
Brass (BR)

Rings

L2

kPa only

psi & kg/cm

L1

kg/cm2 only
psi & bar

SUFFIX AVAILABLE ON MODELS

A3

2" to 312" [Panel mount]

Consult Factory for availability

General Service
(J90XX Only)

ALL DIMENSIONS ARE NOMINAL

GENERAL SERVICE CASE DIMENSIONS

Part#

J04xx
J05xx
J06xx
J11xx
J14xx
J18xx
J20xx
J24xx
J26xx
J40xx
J46xx
J50xx
J54xx
J60xx
J62xx
J80xx
J86xx
J88xx
J90xx

Dial Size
1 2
1 12
1 12
2.0
2.0
2.0
2.0
2.0
2.0
2 12
2 12
2 12
2 12
2 12
2 12
3 12
3 12
3 12
4 12
1

Mount
8" LM
8" UC
1
8" CB
1
8" LM
1
4" LM
1
8" CB
1
4" CB
1
8" UC
1
4" UC
1
8" LM
1
4" LM
1
8" CB
1
4" CB
1
8" UC
1
4" UC
1
4" LM
1
4" CB
1
4" UC
1
4" LM
1

1.67
1.60
1.67
2.20
2.20
2.20
2.20
2.06
2.06
2.73
2.73
2.73
2.73
2.58
2.58
3.71
3.71
3.65
4.53

B
1.75

2.25
2.25

2.81
2.81
3.98

.90
.71
.90
1.22
1.22
1.22
1.22
.94
.94
1.22
1.22
1.23
1.23
.94
.94
1.22
1.15
.91
1.22

D
.72
.72
.82
.82
.88
.88
.82
.82
.88
.88
.80
.87

1.50
1.82
1.82

2.10
2.10

2.77
3.16

16"
16"
7
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
9
16"
7
7

.26

.06-.37

.81

.19

.63

0-0.43
0-0.43

1.22
1.22

.20
.20

.92
.92

0-0.43
0-0.43

1.22
1.22

.20
.20

.92
.92

0-0.49

1.10

.24

.92

.40
.40

.40
.40

.40
.40

15

Severe Service
40MM & 50MM SEVERE SERVICE GAUGE
Copper Alloy Internals
Glycerine Filled
Center Back Mount Only

Marsh Instruments Liquid-Filled Gauges are designed to perform in rugged and harsh environmental conditions - especially where pulsation and vibration is a problem. Liquid Filled Gauges offer a significant cushioning and dampening
effect, reducing pointer flutter and internal gauge damage. Liquid Filled Gauges feature a ventable top fill plug and
can be mounted on a horizontal or vertical plane. The hermetically sealed construction reduces the chance of leaks
and makes field filling an easy option.
Typical applications include refineries, chemical, oil & gas, marine and OEM processes.

SPECIFICATIONS
ACCURACY

2.5% of range across full scale

CASE SIZES

40 or 50 mm diameter

CASE MATERIAL

304 Stainless Steel

CASE STYLE

CB Center Back mount

TUBE & SOCKET

Copper Alloy tube

with nickel plated brass socket

MOVEMENT
Brass

CONNECTION
8 NPT & 14 NPT

RANGES

15 to 160 psi

DIAL STANDARD

Triple scale psi/BAR/kPa

DIAL COLOR

Black markings on white

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi

40MM AND 50MM GAUGE OPTIONS

OPTION
TYPE
Custom Dials
Other Ranges
Fill Medium

Aluminum, black painted

Acrylic

Glycerine Standard

RESTRICTOR

TEMPERATURE LIMITS
0 140 F (filled)

WEIGHT
40mm
50mm

16

0.5 lb.
0.5 lb.

SUFFIX AVAILABLE ON MODELS

M
I

See Marsh Price List for minimums

Consult factory for availability
Consult factory

50mm Dia

FILL MEDIUM

Filler/pressure relief plug

Silicone (SL)

50mm
304 Stainless Steel
Copper Alloy
CB
1
4 NPT
psi/BAR/kPa
M5040P
M5042P
M5046P
M5048P
M5052P

40mm Dia

WINDOW

VENT PLUG

Custom face

40mm
304 Stainless Steel
Copper Alloy
CB
1
8 NPT
psi/BAR/kPa
M4040P
M4042P
M4046P
M4048P
M4052P

A-Size

POINTER

Standard, all ranges

40MM & 50MM GAUGES

ALL DIMENSIONS ARE NOMINAL

B
27.00mm
1.06"
30.00mm
1.18"

C
11.5mm
0.45"
11.5mm
0.45"

E
13.00mm
0.51"
10.00mm
0.39"

Severe Service
63MM SEVERE SERVICE GAUGE

3 Standard Mounting Options: LM, CB and U-Clamp

Glycerine Filled
Ranges to 10,000 psi
Marsh Instruments Liquid-Filled Gauges are designed to perform in rugged applications and harsh environmental conditions especially where pulsation and vibration are a problem. Liquid Filled Gauges offer a significant cushioning and dampening effect,
reducing pointer flutter and internal gauge damage; also lubricating the internals, and reducing corrosion.
All stainless steel Liquid Filled Gauges feature a ventable top fill plug for pressure relief and ease of venting after installation.
Pressure ranges are available through 10,000 psi, with high pressure ranges offering a Helical Bourdon Tube for longer gauge life
and increased durability. The hermetically sealed construction reduces the chance of leaks, and makes field filling an easy option.
Typical applications include refineries, chemical plants, offshore platforms, oil rigs, marine applications, general
industrial application and OEM processes.
STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 15 psi
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
30"Hg VAC to 100 psi
30" Hg VAC to 150 psi
30" Hg VAC to 200 psi
30" Hg VAC to 300 psi
30" Hg VAC to 400 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 6,000 psi
0 to 10,000 psi

NOTE:

63MM SEVERE SERVICE GAUGES

63mm
304 Stainless Steel
Copper Alloy
LM
UC
CB
1
1
1
4 NPT
4 NPT
4 NPT
psi/kPa
J7605P
J7205P
J6405P

63mm
304 Stainless Steel
Stainless Steel
LM
UC
CB
1
1
1
4 NPT
4 NPT
4 NPT
psi/kPa
J7805P
J7405P
J6605P

J7612P
J7614P
J7618P
J7620P
J7624P
J7626P
J7640P
J7642P
J7646P
J7648P
J7652P
J7654P
J7658P
J7660P
J7664P
J7672P
J7674P
J7676P
J7678P
J7682P
J7684P

J7218P
J7220P
J7224P
J7226P
J7240P
J7242P
J7246P
J7248P
J7252P
J7254P
J7258P
J7260P
J7264P
J7272P
J7274P
J7276P
J7278P
J7282P
J7284P

J6418P
J6420P
J6424P
J6426P
J6440P
J6442P
J6446P
J6448P
J6452P
J6454P
J6458P
J6460P
J6464P
J6472P
J6474P
J6476P
J6478P
J6482P
J6484P

J7818P
J7820P
J7824P
J7826P
J7840P
J7842P
J7846P
J7848P
J7852P
J7854P
J7858P
J7860P
J7864P
J7872P
J7874P
J7876P
J7878P
J7882P
J7884P
J7890P

J7418P
J7420P
J7424P
J7426P
J7440P
J7442P
J7446P
J7448P
J7452P
J7454P
J7458P
J7460P
J7464P
J7472P
J7474P
J7476P
J7478P
J7482P
J7484P
J7490P

Items are available on special order. However, minimums and lead times apply. Consult factory.

J6618P
J6620P
J6624P
J6626P
J6640P
J6642P
J6646P
J6648P
J6652P
J6654P
J6658P
J6660P
J6664P
J6672P
J6674P
J6676P
J6678P
J6682P
J6684P
J6690P

SPECIFICATIONS
ACCURACY

ASME Grade B 3/2/3% (2% of

range across middle half of scale)

CASE SIZES

63mm (2.47") diameter

CASE MATERIAL

304 Stainless Steel

CASE STYLE

Rolled ring, hermetically sealed case

CB Center Back Mount
LM Lower Mount
UC U-Clamp Mount

TUBE & SOCKET

Copper alloy or 316 stainless steel

MOVEMENT
Brass

CONNECTION
4 NPT

RANGES

0 to 30" Hg VAC; Compound 30"

Hg to 400 psi; 15 to 10,000 psi

DIAL STANDARD

Dual scale psi and kPa

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted

WINDOW

Polycarbonate

FILL MEDIUM

Glycerine Standard

RESTRICTOR

Standard for all ranges

VENT PLUG

Rubber plug with snip-off feature

WEIGHT
Filled
Dry

1.0 lb.
0.7 lb.

17

Severe Service

63MM SEVERE SERVICE GAUGE OPTIONS

OPTION
TYPE

SUFFIX AVAILABLE ON MODELS

Delete
suffix P

Dry (no fill)

Fill Medium

Silicone (SL)
Adapter ring (3 hole)
Front Flange
Adapter ring (no holes)
Bayonet Case & Ring w/Safety Glass
psi only
bar only
kg/cm2 only
kPa only
Catalog Dials
MPa only
psi & bar
psi & kg/cm2
psi & MPa
Custom Dials
Logo or Custom face
Special restrictor
Restrictor
Restrictor removed
Increased Accuracy
Grade A (2/1/2%)
Special Connections

front flange mount

Dimension
Table

Gauge Size Connection

63mm

DIAL, WHITE WITH

BLACK CHARACTERS

4"

I
R1
R2
J
E
L1
L2
L3
L4
W1
W2
W4
M
H
H1
B

All models

All models
Center Back & U-Clamp only (factory Installed)
U-Clamp only (factory Installed)
Center Back or Lower Mount (consult factory)

See Marsh Price List for minimum

Consult factory for colors and minimums

All models - See Marsh Price List for minimum

All models - See Marsh Price List for minimum
Consult Factory

L1

2.66"
68mm

1.03"
26mm

2.95"
75mm

0.15"
4mm

0.56"
14mm

3.35
85mm

2.43"
62mm

2.5"
64mm

.12
[3.0]

PRESSURE RELIEF PLUG

1.24
[31.5]

2.32
[59]

0.23
[5.8]

120

2.84
[72]

2.68
[68]

120
J

2.48
[63]

L1

BLACK POINTER

1.38"
[35]
9/16 SQUARE
[14.0 SQUARE]

1/4 NPT

H
ALL DIMENSIONS ARE NOMINAL

18

Severe Service
100MM SEVERE SERVICE GAUGE

Brass or Stainless Steel Internals

Ranges to 10,000 psi
Glycerine Filled
Marsh Instruments Liquid Filled Gauges are designed to perform in rugged applications and harsh environmental conditions - especially where pulsation and vibration are a problem. Liquid Filled Gauges offer a significant cushioning and
dampening effect, reducing pointer flutter and internal gauge damage; also lubricating the internals, and reducing corrosion. All stainless steel Liquid Filled Gauges feature a ventable top fill plug for pressure relief and ease of venting after
installation. The hermetically sealed construction reduces the chance of leaks, and makes field filling an easy option.
Typical applications include refineries, chemical plants, offshore platforms, oil rigs, marine applications, general industrial
application and OEM processes.
STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connections (NPT)
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
30" Hg VAC to 100 psi
30" Hg VAC to 150 psi
30" Hg VAC to 200 psi
30" Hg VAC to 300 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 6,000 psi
0 to 10,000 psi

NOTE:

100MM SEVERE SERVICE GAUGES

LM
1
4 NPT
X32965P
X32501P
X32502P
X32887P
X32888P
X32889P
X32504P
X32505P
X32506P
X32507P
X32508P
X32509P
X32510P
X32511P
X32512P
X32513P
X32514P
X32515P
X32516P
X32518P
X32519P

100mm
Stainless Steel
Copper Alloy
CB
1
4 NPT
psi/kPa

X32901P
X32902P
X32903P
X32546P
X32547P
X32548P
X32549P
X32550P
X32551P
X32552P
X32553P
X32554P
X32555P
X32556P
X32557P
X32558P
X32560P
X32561P

UC
1
4 NPT

LM
1
4 NPT
X32967P

X32894P
X32895P
X32896P
X32525P
X32526P
X32527P
X32528P
X32529P
X32530P
X32531P
X32532P
X32533P
X32534P
X32535P
X32536P
X32537P
X32539P
X32540P

SPECIFICATIONS

100mm
Stainless Steel
Stainless Steel
CB
1
4 NPT
psi/kPa

ACCURACY

ASME Grade A 2/1/2% (1% of

range across middle half of scale)
UC
1
4 NPT

CASE SIZES

100mm (3.89") diameter

CASE MATERIAL

304 Stainless Steel

CASE STYLE

X32929P
X32930P
X32931P
X32630P
X32631P
X32632P
X32633P
X32634P
X32635P
X32636P
X32637P
X32638P
X32639P

X32941P
X32942P
X32943P
X32678P
X32679P
X32680P
X32681P
X32682P
X32683P
X32684P
X32685P
X32686P
X32687P

X32935P
X32936P
X32937P
X32654P
X32655P
X32656P
X32657P
X32658P
X32659P
X32660P
X32661P
X32662P
X32663P

X32641P
X32642P
X32644P
X32645P
X32647P

X32689P
X32690P
X32692P
X32693P
X32695P

X32665P
X32666P
X32668P
X32669P
X32671P

Items are available on special order. However, minimums and lead times apply. Consult factory.

Rolled ring, hermetically sealed case

CB Center Back Mount
LM Lower Mount
UC U-Clamp Mount

TUBE & SOCKET

Copper alloy or 316 stainless steel

MOVEMENT
Brass

CONNECTION
4 NPT

RANGES

0 to 30" Hg VAC
Compound 30" Hg VAC to 300 psi
15 to 10,000 psi

DIAL STANDARD

Dual scale psi & kPa

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted

WINDOW

Polycarbonate

FILL MEDIUM

Glycerine Standard

RESTRICTOR

Standard for all ranges

VENT PLUG

Rubber plug with snip-off feature

WEIGHT
Filled
Dry

1.0 lb.
0.8 lb.

19

Severe Service
100MM SEVERE SERVICE GAUGE OPTIONS
OPTION

Fill Medium
Front Flange

Catalog Dials

TYPE

SUFFIX
Delete
suffix P
I
R
E
L1

Dry (no fill)

Silicone (SL)
Adapter Ring (3 hole)
psi only
bar only
kg/cm2

L2

kPa only
MPa
psi & bar

L3
L4
W1

psi & MPa

Logo or custom face
Special restrictor
Restrictor removed
Grade 1A 1% full scale

W4
M
H
H1
B

psi & kg/cm2

Custom Dials
Restrictor

Increased Accuracy
Special Connections

AVAILABLE ON MODELS
All models

All models
U-Clamp & Center Back only (factory installed)

See Marsh Price List for minimum

W2
Consult factory for colors and minimums.
All models - See Marsh Price List for minimum
All models - See Marsh Price List for minimum
All models - See Marsh Price List for minimum
Consult factory for Availability

.14
(3.6)
120

120

L1

G
H

Front Flange

1.04
[26.4]

.30
[7.6]

C
.88
[22.4]

.000 TO .365 [9.3]

PANEL VARIANCE

U-Clamp
Dimension Gauge ConnTable Size ection
100mm

20

4"

1.20
[30.5]

ALL DIMENSIONS ARE NOMINAL

L1

3.90" 1.03" 4.57" 0.19" 9/16" 5.20" 3.62" 3.68"

99mm 26mm 116mm 5mm 14mm 132mm 92mm 94mm

Severe Service
63MM & 100MM BRASS GAUGE
Forged Brass case (one piece construction)
Ranges to 10,000PSI
Heavy Duty Performance

Marsh forged brass gauges are designed for top performance in rugged applications and harsh environments,where corrosive gas or media is not an issue.
Applications include Oil patch, Hydraulics, Natural
gas, OEM and General Industrial applications where
superior quality is required. Liquid Filling protects
against pulsation and vibration offering a cushioning
and dampening effect. The hermetically sealed one
piece design reduces the chance of leaks and allows
field filling as an easy option.

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
30" Hg VAC to 100 psi
30" Hg VAC to 200 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi

63MM BRASS 100MM BRASS

63mm
Forged Brass
Copper Alloy
LM
1
4 NPT
psi
W9005PE
W9012PE
W9014PE
W9016PE
W9020PE
W9040PE
W9042PE
W9046PE
W9048PE
W9052PE
W9054PE
W9058PE
W9060PE
W9064PE
W9072PE
W9074PE
W9076PE
W9078PE
W9082PE
W9090PE

100mm
Forged Brass
Copper Alloy
LM
1
2 NPT
psi
W9405PE
W9412PE
W9414PE
W9416PE
W9420PE
W9440PE
W9442PE
W9446PE
W9448PE
W9452PE
W9454PE
W9458PE
W9460PE
W9464PE
W9472PE
W9474PE
W9476PE
W9478PE
W9482PE
W9490PE

63mm: 1.6% of range across full scale

100mm: ASME Grade 1A - 1% of
range across full scale

CASE SIZES

63mm: diameter (2.5")

100mm: diameter (4.0)

CASE MATERIAL
Forged Brass

CASE STYLES

LM Lower Mount

TUBE & SOCKET

Copper alloy

MOVEMENT
Brass

CONNECTION

100MM BRASS

PRESSURE RELIEF PLUG

.25.03
[6.4.8]

BLACK POINTER

.30.13
[7.63.2]

63mm: 1 4 NPT
100mm: 1 2 NPT

RANGES

0-30" Hg vacuum;
compound ranges 30" Hg vacuum to
200 psi; and 15-10,000 psi

FILL PLUG

1.53
[38.8]

LIQUID FILL LINE

ACCURACY

ALL DIMENSIONS ARE NOMINAL

63MM BRASS
BLACK POINTER

SPECIFICATIONS

2.00
[50.8]

DIAL STANDARD
Single Scale psi

DIAL COLOR

Black markings on white

2.58
[65.5]

POINTER

Aluminum, black painted

3.94
[100.0]
2.18
[55.4]

3.38
[85.7]

DIAL, WHITE WITH BLACK CHARACTERS

1/2 NPT
.43
[11.0]

DIAL, WHITE WITH BLACK CHARACTERS

1/4 NPT

63MM &100MM BRASS GAUGE OPTIONS

OPTION
TYPE
Fill Medium

Catalog Dials

Custom Dials

Dry (no fill)

Glycerine
Silicone (SL)
Bar only
kg/cm2 only
kPa only
MPa only
psi & BAR
psi & kg/cm2
psi & kPa
psi & MPa
Logo or Custom Face

SUFFIX

Delete Suffix P
Standard
I
L1
L2
L3
L4
W1
W2
W3
W4
M

AVAILABLE ON MODELS

Acrylic

RING

7/8 [22] ACROSS FLATS

9/16 HEX
[14.0 HEX]

WINDOW

.53
[13.5]

63mm: Gold Plated ABS

100mm: Chrome Plated Steel

FILL MEDIUM

Glycerine Standard

VENT

Rubber plug with snip-off feature

WEIGHT
63mm
100mm

3.0 lb.
4.0 lb.

Consult factory for minimums

Consult factory for minimums.

21

Precision Service
100MM STAINLESS STEEL GAUGE

Liquid Filled or Dry

Field Fillable
Ranges to 10,000 psi
Heavy Duty Stainless Steel

(Subje

OBaSvOaLilaEbTleEinventory)

ct to

Marsh Instruments Stainless Steel Gauges are built for extended life, and designed for harsh and corrosive
environments. These stainless steel gauges feature top fill plugs and are field fillable. Pressure ranges are available to
10,000 psi. Marsh Liquid Filled Gauges offer significant cushioning and dampening which reduces pointer flutter and
internal gauge damage.
Typical applications include refineries, chemical plants, offshore platforms, oil rigs, marine applications, general
industrial application and OEM processes.
STANDARD RANGES & PART NUMBERS

SPECIFICATIONS
ACCURACY

ASME Grade 1A 1.0% of range

across full scale

CASE SIZES

100mm diameter (4")

CASE MATERIAL

304 Stainless Steel

CASE STYLES

UC U-Clamp Mount
FF Front Flange Mount

TUBE & SOCKET

316 Stainless Steel

MOVEMENT Stainless Steel

CONNECTION

4" NPT lower or

lowerback connection
1

RANGES

30 to 10,000 psi

DIAL STANDARD

Dual scale psi and kPa

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted

WINDOW Acrylic
FILL MEDIUM See options

Rubber plug with snip-off feature

Filled
Dry

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi
To order filled, see filling chart below.

100MM STAINLESS STEEL GAUGES

100mm
Stainless Steel
316 Stainless Steel
UC
1
4 NPT
psi/kPa
H10842
H10846
H10848
H10852
H10854
H10858
H10860
H10864
H10872
H10874
H10876
H10878
H10882
H10890

100MM STAINLESS STEEL GAUGE OPTIONS

OPTION
TYPE

VENT

WEIGHT

TYPE

Fill Medium

2.0 lb.
1.6 lb.

SUFFIX

Dry (no fill)

Glycerine (GL)
Silicone (SL)

Standard
Add suffix P
Add suffix PI

100mm
Stainless Steel
316 Stainless Steel
FF
1
4 NPT
psi/kPa
H10842R
H10846R
H10848R
H10852R
H10854R
H10858R
H10860R
H10864R
H10872R
H10874R
H10876R
H10878R
H10882R
H10890R

AVAILABLE ON MODELS
All ranges

DIMENSIONS

ALL DIMENSIONS ARE NOMINAL

3.88 DIA

3.00

120

120

.72 MAX PANEL

4.96 DIA
4.00 DIA
PANEL
OPENING

4.25 DIA
1.14

4.56 DIA.

Front Flange (FF)

22

.65

1.26

1.75

4.00 DIA
PANEL
OPENING

4.25 DIA
1.14

.22 DIA
(3) HOLES

1/4 NPT - 3/4 HEX

1.50

U-Clamp (UC)

3.88 DIA

1/4 NPT - 3/4 HEX

.65

1.26

1.75

Precision Service
QUALITY SERIES 100MM
STAINLESS STEEL
INTERNAL GAUGE

New !

TYPE

Liquid Filled or Dry - Field Fillable

Adjustable Micrometer Pointer
Ranges to 15,000 psi
Safety Glass Window

Marsh Stainless Steel gauges are built for

extended life and are designed for harsh
and corrosive environments.They feature a
top fill plug, polished bayonet ring and are
field fillable. Liquid filled gauges offer significant cushioning and dampening plus
extend the life of a gauge.
Typical applications include Oil patch,
Refineries, Oil Rigs, Control Panels,
Offshore Platforms, Marine and General
Industrial.
NACE: MR0175
Gauges met NACE standards
for material and hardness

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30" Hg Vacuum
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi
0 to 15,000 psi
0 to 20,000 psi

QUALITY SERIES 100MM SS INTERNAL

100mm
100mm
NACE 100mm
Stainless Steel
316 SS
LM
1
4 NPT
psi/kPa
H20705
H20740
H20742
H20746
H20748
H20752
H20754
H20758
H20760
H20764
H20772
H20774
H20776
H20778
H20782
H20790
H20792
H20794

H207XX

Stainless Steel
316 SS
LM
1
2 NPT
psi/kPa
H20905
H20940
H20942
H20946
H20948
H20952
H20954
H20958
H20960
H20964
H20972
H20974
H20976
H20978
H20982
H20990
H20992
H20994

H207XX

.63
[16.0]

Stainless Steel
316 SS
LM
1
2 NPT
psi/kPa
HN20940
HN20942
HN20946
HN20948
HN20952
HN20954
HN20958
HN20960
HN20964
HN20972
HN20974
HN20976
HN20978
HN20982
HN20990
HN20992
HN20994

SPECIFICATIONS
ACCURACY

ASME Grade 1A 1.0% of range

across full scale

CASE SIZES

100mm diameter (4")

CASE MATERIAL

304 Stainless Steel

CASE STYLES

LM Lower Mount

TUBE & SOCKET

316 Stainless Steel Welded to Case

MOVEMENT Stainless Steel

CONNECTION

4 NPT (H207xx), 12 NPT (H209xx)

RANGES

ALL DIMENSIONS ARE NOMINAL

BLACK MICRO ADJUSTABLE POINTER

1.30
[33.0]

.63
[16.0]

DIAL STANDARD

Dual scale psi and kPa

Black markings on white

1.30
[33.0]

POINTER

Aluminum, black painted,

micro-adjustable
WINDOW Safety Glass (Tempered)
FILL MEDIUM See options

4.39
[111.5]

4.39
[111.5]

Vacuum to 20,000 psi

DIAL COLOR

PRESSURE RELIEF PLUG

PRESSURE RELIEF PLUG

BLACK MICRO ADJUSTABLE POINTER

New !

STANDARD RANGES & PART NUMBERS

VENT

Rubber plug with snip-off feature

3.28
[83.3]

3.28
[83.3]

1/4 NPT
DIAL, WHITE WITH BLACK CHARACTERS

To order filled, see filling chart below.

.59
[15.0]

1/2 NPT
DIAL, WHITE WITH BLACK CHARACTERS

WEIGHT
Filled
Dry

2.0 lb.
1.3 lb.

.59
[15.0]

QUALITY SERIES 100MM STAINLESS STEEL INTERNAL GAUGE OPTIONS

OPTION

Fill Medium

Catalog Dials

TYPE

Dry (no fill)

Glycerine (GL)
Silicone (SL)
psi only
Bar only
kg/cm2 only
kPa only
MPa only
psi & BAR
psi & kg/cm2
psi & MPa

SUFFIX

Standard
Add suffix P
Add suffix PI
E
L1
L2
L3
L4
W1
W2
W4

AVAILABLE ON MODELS

All ranges

NACE

100mm

23

Precision Service
QUALITY SERIES 100MM COPPER
ALLOY INTERNAL GAUGE
Liquid Filled or Dry
Removable polished bayonet ring
Ranges to 10,000 psi
Safety Glass Window

SPECIFICATIONS
ACCURACY

ASME Grade 1A 1.0% of range

across full scale

Stainless steel case with copper alloy internals. Ideal

for heavy duty service in industrial and commercial
environments. Features robust design with removable
polished bayonet ring and adjustable pointer. Field fillable.
Typical applications include industrial machinery, oil
field equipment and controls, wellheads, pipeline and
general industrial.

CASE SIZES

100mm diameter (4")

CASE MATERIAL

304 Stainless Steel

CASE STYLES

LM Lower Mount

TUBE & SOCKET

Copper alloy

MOVEMENT

Stainless Steel

CONNECTION

4 and 12 NPT lower mount

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30" Hg Vacuum
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi

H203XX

RANGES

Vacuum to 10,000 psi

DIAL STANDARD
Single scale psi

New !

QUALITY SERIES 100MM

COPPER ALLOY INTERNAL
100mm
Stainless Steel
Copper Alloy
LM
1
4 NPT
psi
H20305
H20340
H20342
H20346
H20348
H20352
H20354
H20358
H20360
H20364
H20372
H20374
H20376
H20378
H20382
H20390

H205XX

PRESSURE RELIEF PLUG

BLACK MICRO ADJUSTABLE POINTER

DIAL COLOR

Black markings on white

.63
[16.0]

100mm
Stainless Steel
Copper Alloy
LM
1
2 NPT
psi
H20505
H20540
H20542
H20546
H20548
H20552
H20554
H20558
H20560
H20564
H20572
H20574
H20576
H20578
H20582
H20590

ALL DIMENSIONS ARE NOMINAL

PRESSURE RELIEF PLUG

BLACK MICRO ADJUSTABLE POINTER

1.30
[33.0]

.63
[16.0]

1.30
[33.0]

POINTER

Aluminum, black painted,

micro-adjustable

4.39
[111.5]

4.39
[111.5]

WINDOW

Safety Glass

FILL MEDIUM
See options

3.28
[83.3]

3.28
[83.3]

VENT

Rubber plug with snip-off feature

WEIGHT
Filled
Dry

2.0 lb.
1.3 lb.

1/4 NPT
DIAL, WHITE WITH BLACK CHARACTERS

1/2 NPT
DIAL, WHITE WITH BLACK CHARACTERS

To order filled, see filling chart below.

QUALITY SERIES 100MM COPPER ALLOY INTERNAL GAUGE OPTIONS

OPTION
TYPE
SUFFIX
AVAILABLE ON MODELS
Fill Medium

Catalog Dials

24

.59
[15.0]

Dry (no fill)

Glycerine (GL)
Silicone (SL)
bar only
kg/cm2 only
kPa only
MPa only
psi & BAR
psi & kg/cm2
psi & kPa
psi & MPa

Standard
Add suffix P
Add suffix PI
L1
L2
L3
L4
W1
W2
W3
W4

All ranges

.59
[15.0]

Precision Service
HW 160MM
STAINLESS STEEL
GAUGE

Liquid Filled or Dry - Field Fillable

Socket Welded to the Case
Ranges to 20,000 psi
Heavy Duty All Stainless Steel

Marsh Instruments Stainless Steel

Gauges are built for extended life,
and designed for harsh and
corrosive environments. These stainless steel gauges feature top fill
plugs and are field fillable. Pressure
ranges are available to 20,000psi.
Marsh Liquid Filled Gauges offer
significant cushioning and dampening which reduces pointer flutter
and internal gauge damage.
Typical applications include refineries, chemical plants, offshore platforms, oil rigs, marine applications,
general industrial application and
OEM processes.

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi
0 to 20,000 psi

NOTE:

HW 160MM SS GAUGES
160mm
304 Stainless Steel
316 Stainless Steel
LM
1
2 NPT
psi/kPa
HW30942
HW30946
HW30948
HW30952
HW30954
HW30958
HW30960
HW30964
HW30972
HW30974
HW30976
HW30978
HW30982
HW30990
HW30994

SPECIFICATIONS
ACCURACY

ASME Grade 1A 1.0% of range

across full scale

CASE SIZES

160mm diameter (6")

CASE MATERIAL

304 Stainless Steel

CASE STYLES

LM Lower Mount

TUBE & SOCKET

Items are available on special order. However, minimums and

lead times apply. Consult factory. NOTE: To order filled, consult filling chart below.
ALL DIMENSIONS ARE NOMINAL

FILL PLUG
1.97
[50.0]

316 Stainless steel welded to

the case

MOVEMENT

Stainless Steel

CONNECTION
2 NPT

RANGES

15 to 20,000 psi

DIAL STANDARD

Dual scale psi and kPa

BLACK POINTER

DIAL COLOR

Black markings on white

5.88
[149.3]

POINTER

Aluminum, black painted

WINDOW

Safety glass
4.67
[118.5]
7/8 [22.0] ACROSS FLATS

HW 160MM STAINLESS STEEL GAUGE OPTIONS

OPTION
TYPE
Fill Medium

Catalog Dials

Dry (no fill)

Glycerine (GL)
Silicone (SL)
psi only
BAR only
kg/cm2 only
kPa only
MPa only
psi & BAR
psi & kg/cm2
psi & MPa

SUFFIX

Standard
Add suffix P
Add suffix PI
E
L1
L2
L3
L4
W1
W2
W4

See options

VENT

Rubber plug with snip-off feature

WEIGHT

1/2 NPT
DIAL, WHITE WITH BLACK CHARACTERS

FILL MEDIUM

.59
[15.0]

Filled
Dry

4.0 lb.
3.4 lb.

AVAILABLE ON MODELS

All ranges

25

Precision Service
100MM ELITE STAINLESS STEEL GAUGE

All Stainless Steel

Field Fillable
Ranges to 10,000 psi
Liquid Filled or Dry
Solid Front Design Safecase

Marsh Instruments all stainless steel gauges are built for extended life, and designed for harsh and corrosive
environments. These stainless steel gauges feature top fill plugs and are field fillable. Marsh Liquid Filled Gauges
offer significant cushioning and dampening which reduces pointer flutter and internal gauge damage.
Typical applications include refineries, chemical plants, offshore platforms, oil rigs, marine applications, general
industrial application and OEM processes.

SPECIFICATIONS
ACCURACY

ASME Grade 1A 1.0% of range

across full scale

CASE SIZES

100mm diameter (4)

CASE MATERIAL

304 Stainless Steel

CASE STYLE

Solid front & blow-out back

Safecase construction
LM Lower Mount

TUBE & SOCKET

316 Stainless Steel

MOVEMENT

Stainless Steel

CONNECTION
2 NPT

RANGES

30 to 10,000 psi
and 0 to 30" VAC Hg

DIAL STANDARD

Dual scale psi and kPa

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted

WINDOW

Safety glass

STANDARD RANGES & PART NUMBERS

TYPE

100MM ELITE STAINLESS STEEL GAUGES

Size
Case Material
Internals
Mounting/Case Style
Connection
Scale Standard
0 to 30" Hg VAC
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 200 psi
0 to 300 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi

100mm
304 Stainless Steel
316 Stainless Steel
LM
1
2 NPT
psi/kPa
W9605
W9642
W9646
W9648
W9654
W9658
W9664
W9672
W9674
W9676
W9678
W9682
W9690

NOTE: To order filled, consult filling chart below.

100MM ELITE STAINLESS STEEL GAUGE OPTIONS

OPTION
TYPE
SUFFIX
Dry (no fill)
Glycerine (GL)
Silicone (SL)

Fill Medium

FILL MEDIUM
See Options

AVAILABLE ON MODELS

Standard
Add suffix P
Add suffix PI

All ranges
All ranges
All ranges

VENT

Internal compensating diaphragm

WEIGHT
Filled
Dry

3.0 lb.
2.4 lb.

PRESSURE RELIEF DISC

FILL PLUG
2.47

BLACK POINTER

4.24

3.60
3/4 ACROSS FLATS
1/2 NPT
DIAL, WHITE WITH BLACK CHARACTERS

26

1.16

ALL DIMENSIONS ARE NOMINAL

Precision Service
QUALITY GAUGE

Dial Sizes: 3 12" and 4 12"

3 Case Styles
Recalibrator Standard on 3 1/ 2; Adjustable pointer standard on 4 1/ 2
Ranges to 20,000 psi

Marsh Quality Gauges feature the exclusive recalibrator and the accuracy is within 1% in the middle half of span.
These gauges provide continuous service at an economical price.
Typical applications include air compressors, reciprocating pumps, boilers, engines, hydraulic presses and countless
other industrial and OEM applications.

STANDARD RANGES & PART NUMBERS

TYPE

QUALITY GAUGES

Size
Pressure Element
Case Material
Mounting
Connection
Case Style
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
30" Hg VAC to 150 psi
30" Hg VAC to 300 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 4,000 psi
0 to 5,000 psi
0 to 6,000 psi
0 to 10,000 psi
0 to 15,000 psi
0 to 20,000 psi

NOTE:

LM
1
4 NPT
P
psi
H0205
H0212
H0214
H0218
H0224
H0240
H0242
H0246
H0248
H0252
H0254
H0258
H0260
H0264
H0272
H0274
H0276
H0278
H0280
H0282
H0284
H0290
H0292
H0294

With Recalibrator
With Adjustable Pointer
312"
412"
1,000 PSI and below / Copper Alloy, above 1,000 PSI / SS
Steel
Steel
LM
LBM
LBM
LM
LM
LBM
1
1
1
1
1
1
4 NPT
4 NPT
4 NPT
4 NPT
2 NPT
4 NPT
G
G
F
P
P
F
psi
psi
psi
psi
psi
psi
H1205
H1805
H2005
H4205
H4805
H6005
H1212
H1812
H2012
H4212
H4812
H6012
H1214
H1814
H2014
H4214
H4814
H6014
H1218
H1818
H2018
H4218
H4818
H6018
H1224
H1824
H2024
H4224
H4824
H6024
H1242
H1246
H1248
H1252
H1254
H1258
H1260
H1264
H1272
H1274
H1276
H1278
H1280
H1282
H1284
H1290
H1292
H1294

H1842
H1846
H1848
H1852
H1854
H1858
H1860
H1864
H1872
H1874
H1876
H1878
H1880
H1882
H1884
H1890
H1892
H1894

H2042
H2046
H2048
H2052
H2054
H2058
H2060
H2064
H2072
H2074
H2076
H2078
H2080
H2082
H2084
H2090
H2092
H2094

H4242
H4246
H4248
H4252
H4254
H4258
H4260
H4264
H4272

H4842
H4846
H4848
H4852
H4854
H4858
H4860
H4864
H4872
H4874
H4876
H4878
H4882
H4890

Items are available on special order. However, minimums and lead times apply. Consult factory.

H6042
H6046
H6048
H6052
H6054
H6058
H6060
H6064
H6072

SPECIFICATIONS
ACCURACY

ASME Grade A 2/1/2% (1% of

range in middle half of scale)

CASE SIZES

3 12" and 4 12" diameter

6" diameter (see options)

CASE MATERIAL

Steel, black painted

CASE STYLE

F Front Flanged, Lower Back

Mount with U-Clamp; 4 12" has
Hinged Ring (LBM)
G Back Flanged case
P Plain Case, Lower Mount

TUBE

0 - 1,000 PSI: Copper alloy

1,500 PSI - 20,000 PSI:
Stainless Steel

SOCKET

Copper alloy

MOVEMENT

Stainless Steel

RECALIBRATOR

Standard 3 12" only, 4 12" has

adjustable pointer

CONNECTION
4 or 12 NPT

RANGES

0 to 30" Hg VAC; Compound 30"

Hg VAC to 300 psi; 15 to 20,000
psi

DIAL STANDARD
Single scale psi

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted

WINDOW

Instrument Glass

WEIGHT
3 12"
4 12"

2.0 lb.
3.0 lb.

27

Precision Service
QUALITY GAUGES
Dial Divisions
Ranges

Quality Gauge
2/1/2% of Span

Minor
Figure
GraduaIntervals tions
3
0.2

Vacuum
COMPOUND
30" Hg VAC
5 3 0.5 0.2
to 15 psi
30" Hg VAC
10 5 1 0.5
to 30 psi
30" Hg VAC
10 10 1 0.5
to 60 psi
30" Hg VAC
30 30 2
1
to 150 psi
30" Hg VAC
30 30 5
2
to 300 psi
PRESSURE
0 to 15 psi
1
0.1
0 to 30 psi
5
0.2
0 to 60 psi
5
0.5
0 to 100 psi
10
1
0 to 160 psi
20
2
0 to 200 psi
20
2
0 to 300 psi
50
2
0 to 400 psi
50
2
0 to 600 psi
50
5
HIGH PRESSURE
0 to 1,000 psi
100
10
0 to 1,500 psi
300
20
0 to 2,000 psi
200
20
0 to 3,000 psi
500
20
0 to 4,000 psi
500
50
0 to 5,000 psi
500
50
0 to 6,000 psi 1,000
100
0 to 10,000 psi 1,000
100
0 to 15,000 psi 3,000
200
0 to 20,000 psi 2,000
200

QUALITY GAUGE OPTIONS

TYPE
OPTION
Restrictors

Add restrictor
bar only
kg/cm2 only
kPa only
MPa only
psi & bar
psi & kg/cm2
psi & kPa
psi & MPa
Logo or Custom Face
Acrylic (AY)
Safety Glass (SG)
Grade 1A: 1% full scale
Aluminum Back Flange
Steel Hinged Ring Case

Catalog Dials

Custom Dials
Window

Increased Accuracy
Cases

CASE PATTERNS & DIMENSIONS

B

H
L1
L2
L3
L4
W1
W2
W3
W4
M
F2
F3
B
J
J

AVAILABLE ON MODELS

All ranges

See Marsh Price List for minimum

All models - consult factory

312" - 412"
312" - 412"
All models
412" 6" consult factory
6" consult factory

ALL DIMENSIONS ARE NOMINAL

BLOWOUT
PLUG

L
PANEL
OPENING

1.25

N
DRILLING TEMPLATE

.75 ACROSS
WRENCH FLATS

Size
3 12"
4 12"

A
4.86
6.31

B
1.66
1.39
120

C
1.55
2.15

Size
3 12"

A
3.72

H
3.75
4.81

J
1.16
1.27

L
3.75
4.88

M
.11
.11

120

28

SUFFIX

N
2.81
3.88

Q
4.25
5.31

ALL DIMENSIONS ARE NOMINAL

J
D

B
1.69

C
1.55

D
3.34

E
.67

G
4.31

J
1.16

.75 ACROSS
WRENCH FLATS

K
2.00

Panel Mounting
.22

Precision Service
TEST GAUGE +/- 0.5%

Adjustable Micrometer Knife-Edge Pointer with Mirror Dial

Stainless Steel Movement
Dial Size: 4 12"
Ranges to 10,000 psi

The Marsh Test Gauge is designed with a black painted steel housing and the choice of copper alloy or 316
stainless steel tube and socket to meet the demanding service needs of various test gauge applications. Accuracy
is 0.5% of full span. A highly polished integral mirror is positioned between the two graduation arcs on the dial
face The knife-edge pointer is reflective so that, when the pointer and its reflection are in alignment, parallax is
virtually eliminated and a true dial reading is assured.
Typical applications include test stands, aviation ground support, petroleum, chemical, utilities, industrial vessels
and panel builders.

STANDARD RANGES & PART NUMBERS

TYPE

Size
Internals
Case Material
Mounting
Case Style
Connection
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 15 psi
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi

TEST GAUGES
Steel
LM
P
1
4 NPT
D0205
D0210
D0212
D0214
D0240
D0242
D0246
D0248
D0252
D0254
D0258
D0260
D0264

4 2"
Copper Alloy
Steel
LM
P
1
2 NPT
psi
D0605
D0610
D0612
D0614
D0640
D0642
D0646
D0648
D0652
D0654
D0658
D0660
D0664
1

4 2"
Stainless Steel
Steel
Steel
LM
LBM
P
F
1
1
2 NPT
4 NPT
psi
D5605
D6105
D5610
D6110
D5612
D6112
D5614
D6114
D5640
D6140
D5642
D6142
D5646
D6146
D5648
D6148
D5652
D6152
D5654
D6154
D5658
D6158
D5660
D6160
D5664
D6164
D5672
D6172
D5674
D6174
D5676
D6176
D5678
D6178
D5682
D6182
D5690
D6190

SPECIFICATIONS
ACCURACY

Steel
LBM
F
1
4 NPT

Steel
LM
P
1
4 NPT

D1205
D1210
D1212
D1214
D1240
D1242
D1246
D1248
D1252
D1254
D1258
D1260
D1264

D5205
D5210
D5212
D5214
D5240
D5242
D5246
D5248
D5252
D5254
D5258
D5260
D5264
D5272
D5274
D5276
D5278
D5282
D5290

Steel
LBM
F
1
2 NPT
D6405
D6410
D6412
D6414
D6440
D6442
D6446
D6448
D6452
D6454
D6458
D6460
D6464
D6472
D6474
D6476
D6478
D6482
D6490

ASME Grade 2A 0.5% of range

across full scale

CASE SIZE

4 12" diameter

CASE MATERIAL

Steel, Black Painted

CASE STYLE

F Front Flanged with U-clamp and

hinged ring (LBM)
P Plain Case Lower Mount (LM)

TUBE & SOCKET

Copper alloy or 316 Stainless Steel

MOVEMENT

Stainless Steel

CONNECTION
4 or 12 NPT

RANGES

0 to 30" Hg VAC; Compound 30"

Hg to 60 psi; 15 to 10,000 psi

DIAL STANDARD
single scale psi

DIAL COLOR

Black markings on white

with mirror dial to avoid parallax

POINTER

Aluminum, black painted,

micro-adjustable, knife-edge

WINDOW

Instrument Glass

PRESSURE RELIEF
Blowout plug
WEIGHT 3.0 lb.

29

Precision Service
TEST GAUGE OPTIONS
OPTION

TYPE

Restrictors
Catalog Dials

Dial Divisions
Ranges
Vacuum
COMPOUND
30" Hg VAC
to 15 psi

Test Gauge
0.50% of Span

Minor
Figure
GraduaIntervals
tions
2
0.1

30" Hg VAC
to 30 psi

0.2 0.1

10

0.5 0.1

30" Hg VAC
to 150 psi

10

0.2

30 10

0.5

30" Hg VAC
to 60 psi

30" Hg VAC
30 30
to 300 psi
PRESSURE
0 to 15 psi
1
0 to 30 psi
2
0 to 60 psi
5
0 to 100 psi
10
0 to 160 psi
10
0 to 200 psi
20
0 to 300 psi
50
0 to 400 psi
50
0 to 600 psi
50
HIGH PRESSURE
0 to 1,000 psi
100
0 to 1,500 psi
100
0 to 2,000 psi
200
0 to 3,000 psi
500
0 to 4,000 psi
500
0 to 5,000 psi
500
0 to 10,000 psi 1,000

30

0.05
0.1
0.2
0.5
0.5
1
1
2
2
5
5
10
10
20
20
50

SUFFIX

Add restrictor
bar only
kg/cm2 only
kPa only
MPa only
psi & bar
psi & kg/cm2
psi & kPa
psi & MPa
Logo or Custom Face
Acrylic (AY)
Safety Glass (SG)
412" Polypropylene (TR)
412" Aluminum Back Flange
412" Aluminum Front Flange

Custom Dials
Window
Cases

H
L1
L2
L3
L4
W1
W2
W3
W4
M
F2
F3
J1
J2
J3

AVAILABLE ON MODELS

All ranges
See Marsh Price List for minimum

All models - consult factory

412"
412"
Consult Factory

CASE PATTERNS & DIMENSIONS

Size
4 2"
1

6.31

1.39

ALL DIMENSIONS ARE NOMINAL

2.31

4.81

1.27

4.88

.11

3.88

5.31

Precision Service
MASTER TEST GAUGE
(SERIES D)
Knife-Edge Pointer
with Mirror Dial
External Dial Adjustment
Dial Size: 6"
Ranges to 10,000 psi

Marsh Master Test Gauges are used

in precision laboratory applications
and industrial environments where
precise accuracy is demanded. For
pressure readings to 10,000 psi,
Marsh Master Test Gauges offer
dependable, consistent accuracy
within 0.25% of span, meeting all
requirements of ASME Grade 3A
specifications. The pressure relieving blowout plug provides the
increased safety required for potentially dangerous applications.
Typical applications include lab's,
universities, automotive testing,
government test facilities and pharmaceutical.

STANDARD RANGES & PART NUMBERS

TYPE

MASTER TEST GAUGES

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 15 psi
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi

6" (160mm)
Stainless Steel
Copper Alloy
LM
1
4 NPT
psi
D31405
D31410
D31412
D31414
D31440
D31442
D31446
D31448
D31452
D31454
D31458
D31460
D31464

LM
1
2 NPT
psi

SPECIFICATIONS
ACCURACY

ASME Grade 3A 0.25% of

range across full scale

CASE SIZE

6" (160mm) diameter

CASE MATERIAL

304 Stainless Steel

D31472
D31474
D31476
D31478
D31482
D31490

ALL DIMENSIONS ARE NOMINAL

LMLower Mount

TUBE & SOCKET

Copper alloy

MOVEMENT

Stainless Steel

CONNECTION

4" NPT through 600 psi

2" NPT 1000 psi & above

1
1

RANGES

0 to 30" Hg VAC; Compound 30"

Hg to 60 psi; 15 to 10,000 psi

1.93
[49.0]

TWISTED BLACK POINTER

CASE STYLE

DIAL STANDARD
Single scale psi

DIAL COLOR

Black markings on white with

mirror dial to avoid parallax

5.87
[149.0]

POINTER
4.53
[115.0]

MASTER TEST GAUGE OPTIONS

OPTION
TYPE

Catalog Dials

Custom Dials
Window

Tube & Socket

bar only
kg/cm2 only
kPa only
MPa only
psi & bar
psi & kg/cm2
psi & kPa
psi & MPa
Logo or Custom Face
Acrylic (AY)
Safety Glass (SG)
Stainless Steel

SUFFIX
L1
L2
L3
L4
W1
W2
W3
W4
M
F2
F3

Instrument Glass

Blowout plug
WEIGHT 5.0 lb.

7/8 [22.0] ACROSS

WRENCH FLATS

1/4 NPT

WINDOW

PRESSURE RELIEF

ZERO ADJUSTMENT

DIAL, WHITE WITH BLACK CHARACTERS

Aluminum, black painted, knife-edge

.59
[15.0]

AVAILABLE ON MODELS

Consult Factory

31

Precision Service
INSPECTORS TEST GAUGE

3" Dial
Vacuum to 1,000 psi Range
Recalibrator on Dial Face
ASME Grade 2A Accuracy

Marsh Inspectors Test Gauges are specifically designed for use by steam boiler, air brake and pressure system
inspectors. The rugged 3" Inspectors Test Gauge features a nickel-plated case and an accuracy of 0.5% of span.
The bushed Mastergauge movement with Recalibrator is standard for these gauges. Mating parts are of dissimilar
metals to prevent seizing. Bearing sleeves are of bronze, and the sector is brass.
Typical applications include steam boiler, air brakes, pressure system inspectors, and for use on other testing
applications.

SPECIFICATIONS
ACCURACY

ASME Grade 2A 0.5% of span

across full scale

CASE SIZES
3" diameter

CASE MATERIAL

Brass, Nickel Plated

CASE STYLE

Lower Mount with threaded ring

TUBE & SOCKET

Copper alloy

MOVEMENT
Brass

RECALIBRATOR
Standard

CONNECTION
4 NPT

RANGES

0 to 30" Hg VAC; 15 to 1,000 psi

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30" Hg VAC
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 600 psi
0 to 1,000 psi

INSPECTORS TEST GAUGES

3"
Nickel Plated Brass
Copper Alloy
LM
1
4 NPT
psi/kPa
D1505
D1540
D1542
D1546
D1548
D1552
D1554
D1558
D1564
D1572

ALL DIMENSIONS ARE NOMINAL

TWISTED BLACK POINTER

DIAL STANDARD
Dual Scale psi/kPa

DIAL, WHITE WITH BLACK CHARACTERS

1.43

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted, knife-edge

3.26

WINDOW

Beveled glass

PROTECTIVE COVER

Opaque plastic lens cover

WEIGHT 2.0 lb.

2.59
COVER
5/8 SQUARE
RECALIBRATOR

INSPECTORS TEST GAUGE OPTIONS

OPTION
TYPE
Restrictors

Catalog Dials

Custom Dials

32

Add restrictor
psi only
bar only
kg/cm2 only
kPa only
MPa only
psi & bar
psi & kg/cm2
psi & MPa
Logo or Custom Face

1/4 NPT

SUFFIX
H
E
L1
L2
L3
L4
W1
W2
W4
M

.53

AVAILABLE ON MODELS
All ranges

See Marsh Price List for minimum

All models - consult factory

Process Gauges
PROCESS GAUGE

4 12" and 6" Dials

4 Safecase Designs
Pressure Ranges Vacuum to 20,000 psi
Dry or Liquid Filled
Micrometer Pointer

Marsh Process Gauges are the industry standard in performance. With over 125 years of proven experience, Marsh
offers the most complete line of process instrumentation in the industry. An extensive list of designs and options
makes the Marsh line of Process Gauges the intelligent and practical choice in process instrumentation. All case
styles feature safecase solid-front construction.
Typical applications include chemical and petroleum chemical processes, compressors, power plants and oil platforms.

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting
Case Style
Connection
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 15 psi
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
30" Hg VAC to 100 psi
30" Hg VAC to 200 psi
30" Hg VAC to 300 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi
0 to 15,000 psi
0 to 20,000 psi

PROCESS GAUGES

LM
T
1
4 NPT
psi
P0105
P0110
P0112
P0114
P0116
P0120
P0124
P0140
P0142
P0146
P0148
P0152
P0154
P0158
P0160
P0164
P0168

4 2"
Polypropylene
Copper Alloy
LBM
LM
T
T
1
1
4 NPT
2 NPT
psi
psi
P0205
P0505
P0210
P0510
P0212
P0512
P0214
P0216
P0516
P0220
P0520
P0224
P0524
P0240
P0540
P0242
P0542
P0246
P0546
P0248
P0548
P0252
P0552
P0254
P0554
P0258
P0558
P0260
P0560
P0264
P0564
P0268
P0568
P0574
P0576
P0578
P0582
P0590
1

LBM
T
1
2 NPT
psi
P0605
P0610
P0612
P0614
P0616
P0620
P0624
P0640
P0642
P0646
P0648
P0652
P0654
P0658
P0660
P0664
P0668

Add P Suffix to P/N for Liquid Filling with Glycerine, add PI for Silicone.
NOTE: Lower back mount gauges are not fillable
NOTE:

4 2"
Polypropylene
Stainless Steel
LM
LBM
T
T
1
1
4 NPT
4 NPT
psi
psi
P5105
P5205
P5110
P5210
P5112
P5212
P5114
P5214
P5116
P5216
P5120
P5220
P5124
P5224
P5140
P5240
P5142
P5242
P5146
P5246
P5148
P5248
P5152
P5252
P5154
P5254
P5158
P5258
P5160
P5260
P5164
P5264
P5168
P5268
P5174
P5274
P5176
P5276
P5178
P5278
P5182
P5282
P5190
P5290
P5192
P5292
P5194
P5294
1

Items are available on special order. However, minimums and lead times apply. Consult factory.

SPECIFICATIONS
ACCURACY

ASME Grade 2A 0.5% of full scale

CASE SIZES

4 12" and 6" diameter

CASE MATERIAL

Safecase polypropylene (turret

style only) & safecase aluminum

CASE STYLE

4 12": G Back flanged case

(aluminum)
H Front flange hinged ring
(aluminum)
T Turret (polypropylene)
6": G Back flanged case

TUBE & SOCKET

Copper alloy or 316 stainless steel

MOVEMENT

Stainless Steel

CONNECTION

1
4 or 12 NPT
LM Lower Mount
LBM Lower Back Mount

RANGES

0 to 30" Hg VAC; Compound 30" Hg

VAC to 300 psi; 15 to 20,000 psi

DIAL STANDARD
Single Scale psi

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted,

micro-adjustable

WINDOW
Acrylic

FILL MEDIUM

Dry or filled. Note: ALL 4 12" lower

mount Process Gauges are fieldfillable. Optional factory filled
glycerine or silicone

SAFECASE

Safecase construction standard

on all Process Gauges

VENT

Internal compensating diaphragm

WEIGHT

Aluminum
Polypropylene
Aluminum
Polypropylene

5.0
3.0
6.0
4.0

lb.
lb.
lb.
lb.

Dry
Dry
Filled
Filled

33

Process Gauges
TYPE

Size
Case Material
Internals
Mounting
Case Style
Connection
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 15 psi
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
30" Hg VAC to 100 psi
30" Hg VAC to 200 psi
30" Hg VAC to 300 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi
0 to 15,000 psi
0 to 20,000 psi
Size
Case Material
Internals
Mounting
Case Style
Connection
Scale Standard
0 to 30" Hg VAC
30" Hg VAC to 15 psi
30" Hg VAC to 30 psi
30" Hg VAC to 60 psi
30" Hg VAC to 100 psi
30" Hg VAC to 200 psi
30" Hg VAC to 300 psi
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 5,000 psi
0 to 10,000 psi
0 to 15,000 psi
0 to 20,000 psi

34

PROCESS GAUGES - STANDARD RANGES & PART NUMBERS

412"
Polypropylene
Stainless Steel
LM
LBM
T
T
1
1
2 NPT
2 NPT
psi
psi
P5605
P5705
P5610
P5710
P5612
P5712
P5614
P5714
P5616
P5716
P5620
P5720
P5624
P5724
P5640
P5740
P5642
P5742
P5646
P5746
P5648
P5748
P5652
P5752
P5654
P5754
P5658
P5758
P5660
P5760
P5664
P5764
P5668
P5768
P5674
P5774
P5676
P5776
P5678
P5778
P5682
P5782
P5690
P5790
P5692
P5792
P5694
P5794

LBM
G
1
4 NPT
psi
P15005
P15010
P15012
P15014
P15016
P15020
P15024
P15040
P15042
P15046
P15048
P15052
P15054
P15058
P15060
P15064
P15068
P15074
P15076
P15078
P15082
P15090
P15092
P15094

LM
G
1
4 NPT
psi
P10005
P10010
P10012
P10014
P10016
P10020
P10024
P10040
P10042
P10046
P10048
P10052
P10054
P10058
P10060
P10064
P10068

412"
Aluminum
Stainless Steel
LBM
LBM
G
H
1
1
2 NPT
4 NPT
psi
psi
P15505 P18005
P15510 P18010
P15512 P18012
P15514 P18014
P15516 P18016
P15520 P18020
P15524 P18024
P15540 P18040
P15542 P18042
P15546 P18046
P15548 P18048
P15552 P18052
P15554 P18054
P15558 P18058
P15560 P18060
P15564 P18064
P15568 P18068
P15574 P18074
P15576 P18076
P15578 P18078
P15582 P18082
P15590 P18090
P15592 P18092
P15594 P18094

LBM
H
1
2 NPT
psi
P18505
P18510
P18512
P18514
P18516
P18520
P18524
P18540
P18542
P18546
P18548
P18552
P18554
P18558
P18560
P18564
P18568
P18574
P18576
P18578
P18582
P18590
P18592
P18594

LM
G
1
2 NPT
psi
P10505
P10510
P10512
P10514
P10516
P10520
P10524
P10540
P10542
P10546
P10548
P10552
P10554
P10558
P10560
P10564
P10568

412"
Aluminum
Copper Alloy
LBM
LBM
G
G
1
1
4 NPT
2 NPT
psi
psi
P11005
P11505
P11010
P11510
P11012
P11512
P11014
P11514
P11016
P11516
P11020
P11520
P11024
P11524
P11040
P11540
P11042
P11542
P11046
P11546
P11048
P11548
P11052
P11552
P11054
P11554
P11058
P11558
P11060
P11560
P11064
P11564
P11068
P11568

LBM
H
1
4 NPT
psi
P16005
P16010
P16012
P16014
P16016
P16020
P16024
P16040
P16042
P16046
P16048
P16052
P16054
P16058
P16060
P16064
P16068

LM
G
1
4 NPT
psi
P20005
P20010
P20012
P20014
P20016

6"
Aluminum
Copper Alloy
LM
LBM
G
G
1
1
2 NPT
4 NPT
psi
psi
P20505 P21005
P20510 P21010
P20512 P21012
P20514 P21014
P20516 P21016

LBM
G
1
2 NPT
psi
P21505
P21510
P21512
P21514
P21516

P20040
P20042
P20046
P20048
P20052
P20054
P20058
P20060
P20064
P20068

P20540
P20542
P20546
P20548
P20552
P20554
P20558
P20560
P20564
P20568

P21540
P21542
P21546
P21548
P21552
P21554
P21558
P21560
P21564
P21568

P21040
P21042
P21046
P21048
P21052
P21054
P21058
P21060
P21064
P21068

LBM
H
1
2 NPT
psi
P16505
P16510
P16512
P16514
P16516
P16520
P16524
P16540
P16542
P16546
P16548
P16552
P16554
P16558
P16560
P16564
P16568

412"
Aluminum
Stainless Steel
LM
LM
G
G
1
1
4 NPT
2 NPT
psi
psi
P14005
P14505
P14010
P14510
P14012
P14512
P14014
P14514
P14016
P14516
P14040
P14042
P14046
P14048
P14052
P14054
P14058
P14060
P14064
P14068

P14540
P14542
P14546
P14548
P14552
P14554
P14558
P14560
P14564
P14568
P14574
P14576
P14578
P14582
P14590
P14592
P14594

LM
G
1
4 NPT
psi
P24005
P24010
P24012
P24014
P24016

6"
Aluminum
Stainless Steel
LM
LBM
G
G
1
1
2 NPT
4 NPT
psi
psi
P24505 P25005
P25010
P24512 P25012
P24514 P25014
P24516 P25016

LBM
G
1
2 NPT
psi
P25505
P25510
P25512
P25514
P25516

P24040
P24042
P24046
P24048
P24052
P24054
P24058
P24060
P24064
P24068
P24074
P24076
P24078
P24082
P24090
P24092
P24094

P24540
P24542
P24546
P24548
P24552
P24554
P24558
P24560
P24564
P24568
P24574
P24576
P24578
P24582
P24590
P24592
P24594

P25540
P25542
P25546
P25548
P25552
P25554
P25558
P25560
P25564
P25568
P25574
P25576
P25578
P25582
P25590
P25592
P25594

P25040
P25042
P25046
P25048
P25052
P25054
P25058
P25060
P25064
P25068
P25074
P25076
P25078
P25082
P25090
P25092
P25094

Process Gauges

Turret
Panel Mounting Holes
0.22

ALL DIMENSIONS ARE NOMINAL

Size
4 12"

5.00

3.13

1.13

4.28

1.53

4.13

5.38

5.85

TURRET CASE
T

1.27

BACK FLANGE CASE

G
Back Flanged

Front Flanged Panel

Mounting Holes
0.23

Size
4 12"
6"

Size
4 12"

A
4.94
6.63

B
2.88
2.88

6.08

C
1.19
1.19

1.70

D
4.28
4.97

1.88

E
1.50
1.50

5.38

ALL DIMENSIONS ARE NOMINAL

G
5.38
7.00

H
5.78
7.50

4.88

J
1.27
1.27

23
.23
.28

ALL DIMENSIONS ARE NOMINAL

1.27

0.54

FRONT FLANGE CASE

H
35

Process Gauges
PROCESS GAUGE OPTIONS
OPTION

Restrictors
Fill Medium

TYPE

Add restrictor
Glycerine (GL)
Silicone (SL)

Dial Divisions
Ranges
Vacuum
COMPOUND
30" Hg VAC
to 15 psi

Process Gauge
Series P
0.5% of Span
Minor
Figure
GraduaIntervals
tions
3
0.2

30" Hg VAC
to 30 psi

3 0.5 0.2

10

0.5

30" Hg VAC
to 150 psi

10 10

0.5

30 30

30 30

30" Hg VAC
to 60 psi
30" Hg VAC
to 300 psi
PRESSURE
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
HIGH PRESSURE
0 to 1,000 psi
0 to 1,500 psi
0 to 2,000 psi
0 to 3,000 psi
0 to 4,000 psi
0 to 5,000 psi
0 to 10,000 psi
0 to 15,000 psi
0 to 20,000 psi

36

1
5
5
10
20
20
50
50
50

0.1
0.2
0.5
1
1
2
2
2
5

100
300
200
500
500
500
1,000
3,000
2,000

10
10
20
20
20
50
100
100
200

Cases
Custom Dials

PI

L1

kPa only

L3

MPa only

L4

W1

psi & kPa

W3

psi & kg/cm2

Instrument Glass (GS)
Safety Glass (SG)

Polycarbonate

AVAILABLE ON MODELS
All ranges

412" Lower Mount only (all ranges)

412" Lower Mount only (all ranges)

L2

psi & bar

psi & MPa

Window

bar only

kg/cm2 only
Catalog Dials

SUFFIX

W2
W4
F1
F3
F4

See Marsh Price List for minimum

412" & 6"

412" & 6"

Phenolic Turret (PH)

J1

412"

6" Hinged Ring Steel Case

with U-Clamp

6" (Adjustable pointer only)

412" Steel Case (LM or LBM)

Logo or Custom Face

412" (Adjustable pointer only)

Consult factory for colors and minimums.

NOTE: 4 12" Lower back mount, 6" Lower mount and 6" Lower back are not fillable (only available dry).

Diaphragm
DIAPHRAGM GAUGES

Dial Sizes: 2 12", 3 12", 4 12"

Four Case Styles
Accuracy: ASME B40.1 - 2/1/2%

Marsh Instruments Low Pressure Diaphragm Gauges are universally known for their dependable performance and
accuracy. Incorporating a unique design feature, the diaphragm element in this gauge allows accurate low pressure
readings in a variety of applications. Featuring a bronze diaphragm element, the gauge is capable of ASME Grade A1% accuracy for ranges above 30" of water. Ranges are available in vacuum and pressure in inches of water, ounces
per square inch and millimeters of mercury.
Typical applications include HVAC systems and low pressure gas burner systems.
STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internal
Mounting/Case
Connection
0 to 10" H20
0 to 15" H20
0 to 30" H20
0 to 60" H20
0 to 100" H20
0 to 160" H20
0 to 200" H20
0 to 300" H20
0 to 3 psi
0 to 5 psi
0 to 10 psi
0 to 10 oz/in2
0 to 15 oz/in2
0 to 30 oz/in2
0 to 60 oz/in2
0 to 100 oz/in2
0 to 160 oz/in2
8.75 oz/in2 and 15" H20
20 oz/in2 and 35" H20
32 oz/in2 and 55" H20
58 oz/in2 and 100" H20
0 to 15" H20 VAC
0 to 30" H20 VAC
0 to 60" H20 VAC
0 to 100" H20 VAC
0 to 200" H20 VAC

NOTE:

DIAPHRAGM GAUGES

LM
4 NPT
G22675
G24500
G22704
G22705
G22687
G22695
G22696
G22697
G22685
G22702
G22699
G22677
G22680
G24501
G22684
G22691
G26062
G22706
G22709
G22707
G22710
G22912
G22914
G22918
G24502
G22921
1

LM
8 NPT
G22711
G24503
G22740
G22741
G22723
G22731
G22732
G22733
G22721
G22738
G22735
G22713
G22716
G33404
G22720
G22727
G33405
G22742
G22745
G22743
G22746
G33406
G29804
G33407
G26962
G33409
1

2 2"
Steel
Copper Alloy
U
U
CB
1
1
4 NPT 18 NPT
4 NPT
G11181 G11248 G22747
G11246 G11313 G26504
G11189 G11256 G22776
G11208 G11314 G22777
G11217 G11284 G22759
G11232 G11299 G22767
G11233 G11300 G22768
G11236 G11303 G22769
G11215 G11282 G22757
G10623 G11310 G22774
G11239 G11306 G22771
G11186 G11253 G22749
G11194 G11261 G22752
G11206 G11273 G24504
G11213 G11280 G22756
G11226 G11293 G22763
G11237 G11304 G33410
G11185 G11252 G22778
G11200 G11267 G22781
G11195 G11262 G22779
G11214 G11281 G22782
G11873 G11906 G22942
G11876 G11909 G22944
G11884 G11917 G22948
G11885 G11918 G22949
G11892 G11925 G22951

3 2"
1

CB
8 NPT
G27110
G30237
G11652
G11671
G11675
G11695
G11696
G11699
G11678
G22810
G11702
G11649
G11657
G11669
G11676
G33411
G11700
G11648
G11663
G11658
G22947
G12104
G12107
G12115
G12116
G12123
1

FF
4 NPT
G11578
G11642
G11586
G11605
G11609
G11628
G33412
G33413
G11612
G10619
G11635
G11583
G11591
G11603
G11610
G11622
G11633
G11582
G11597
G11592
G11611
G12071
G12074
G12082
G12083
G12090
1

4 2"
1

Steel
Copper Alloy
LM
LM
1
1
4 NPT
4 NPT
G24608 G25756
G24631 G25981
G24625 G25749
G24626 G25844
G24613 G25982
G24617 G25980
G24618 G26021
G24619 G25755
G24612 G33414
G24624 G26018
G24621 G25754
G24609 G33415
G24610 G25753
G24632 G25750
G24611 G25757
G24615 G26025
G26894 G33416
G24627 G33417
G24629 G25748
G24628 G25984
G24630 G33418
G24708 G26023
G24709 G26020
G24710 G26016
G24716 G26019
G24711 G33420

Items are available on special order. However, minimums and lead times apply. Consult factory.

SPECIFICATIONS
ACCURACY

For ranges 30" H 2 0 & above:

ASME Grade A = 2/1/2% (1%
of range across middle half of
scale). For ranges below 30" H20:
3/1/3% (1% of range across
middle half of scale)

CASE SIZES

2 12", 3 12", 4 12" diameter

CASE MATERIAL

Steel, black painted

CASE STYLE

CB Center Back Mount

FF Three-holed Front Flanged
Mount
LM Lower Mount
UC U-Clamp Mount

DIAPHRAGM & SOCKET

Phosphor bronze diaphragm

soft-soldered to brass socket

MOVEMENT

Brass sector and pinion

CONNECTION
1
8 & 14 NPT

DIAL STANDARD

Dual Scale with kPa

Triple Scale: oz/in 2, in H 2 0, & kPa

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted

WINDOW

2 12" & 3 12": Acrylic twist-in

Clearlok
4 12": flat acrylic with steel
friction ring

RESTRICTOR

0.013" standard. No restrictor on

0 to 10" H 2 O range

WEIGHT

2 12"
3 12"
4 12"

0.5 lb.
0.7 lb.
1.0 lb.

37

Diaphragm
DIAPHRAGM GAUGE OPTIONS
OPTION
TYPE

AVAILABLE ON MODELS

Restrictors

all models

Window

Ring
Ring / Window
Cases
312" Case

Connections

Compound Ranges
Custom Dials

Back
Flanged

38

SIZE
2 12"
3 12"
4 12"

A
2.63
3.69
4.78

B
1.50
1.59
1.47

D
2.19
2.72
3.38

E
.38
.38
.81

Acrylic (knurled edge)

0.008 Restrictor
0.016 Restrictor
0.018 Restrictor
0.025 Restrictor
Press ring, chrome
Glass & Black Steel Ring
Stainless Steel
Brass
Chrome plated
Center Back (CB)
U-Clamp (UC)
Hose Barb (18" OD & 14" OD)
Vacuum & Pressure
with front zero adjustment
Logo or custom face

all models

212" to 312" Panel Mount

212" to 312" all models
212"- Lower Mount or Panel Mount
212"- Lower Mount or Centerback
Lower Mount or Centerback
312"
312"
All models (10 pc. minimum)
All models (10 pc. minimum)

Consult factory for colors and minimums.

ALL DIMENSIONS ARE NOMINAL

Center Back

Size
2 12"
3 12"

A
B
2.63 1.50
3.69 1.59

C
.84
.84

U-Clamp

Size A
B
2 12" 2.81 1.25
3 12" 3.98 1.69

C
.84
.84

H
2.59
3.66

Diaphragm
VACUUM CLEANER TEST GAUGE

Includes 2 12" dial size gauge

Dual Scale: in. H 2 0 & kPa vacuum
Complete with rubber plug to fit vacuum cleaner intake opening
TYPE
Range
0 to 60" H 2 0
0 to 100" H 2 0
0 to 160" H 2 0
0 to 200" H 2 0

82K
Part No.
G32426
G24505
G25759
G26098

GAS PRESSURE TEST SET

Includes 2 12" dial size gauge

Provided in grey polyethylene case with 3 ft. of rubber tubing
TYPE
Range
0 to 15 H 2 0

0 to 8.75 oz/in
0 to 20 oz/in 2
0 to 58 oz/in 2

0 to 15 H 2 0
0 to 30 H 2 0
0 to 100 H 2 0

0 to 4.0 kPa
0 to 4.0 kPa
0 to 8.6 kPa
0 to 25 kPa

Ranges
Figure Intervals Minor Graduations
0 to 10 H 2 0
1
0.1
0 to 15 H 2 0
3
0.2
0 to 30 H 2 0
5
0.5
0 to 60 H 2 0
10
1
0 to 100 H 2 0
10
1
0 to 160 H 2 0
20
2
0 to 200 H 2 0
20
2
0 to 300 H 2 0
50
5
0 to 3 psi
0.5
0.05
0 to 5 psi
1
0.1
0 to 10 psi
1
0.1
0 to 10 psi oz/in2
1
0.1
0 to 15 psi oz/in2
3
0.2
0 to 30 psi oz/in2
5
0.5
0 to 60 psi oz/in2
10
1
0 to 100 psi oz/in2
10
1
0 to 160 psi oz/in2
20
2
8.75 oz/in2 and 15 H 2 0
1/3
0.2/0.2
20 oz/in2 and 35 H 2 0
4/5
0.5/1
32 oz/in2 and 55 H 2 0
4/10
1/1
58 oz/in2 and 100 H 2 0
10/20
1/2
0 to 15 H 2 0 VAC
3
0.2
0 to 30 H 2 0 VAC
5
0.5
0 to 60 H 2 0 VAC
10
1
0 to 100 H 2 0 VAC
10
1
0 to 160 H 2 0 VAC
20
2
0 to 200 H 2 0 VAC
20
2

84K
Part No.
G28145
G33421
G24507
G27038

SPECIAL MEDICAL GAUGES

Consult Factory
800-727-5646

39

HVAC/R
GAS TEST GAUGE

Hex or Bell Type mounting

15 to100 Psi pressure ranges
Steel case and brass internals

Use to pressure test all new gas installations for leaks and passing inspection codes. After installing Gas Test
Gauge, the system is pressurized with air. Any leakage will be indicated by a pressure drop on the gauge.
Typical applications include testing of gas and other pressure media.

SPECIFICATIONS
ACCURACY

ASME Grade 3/2/3%(2% of

range across middle half of scale)

CASE SIZES
2" diameter

CASE MATERIAL

Steel, black painted

MOUNTING STYLE

Reducing Bell or Hex Style

HOUSING MATERIAL

Reducing Bell: Iron, black painted

Hex Body: Steel, Zinc Dichromate
Plated

TUBE & SOCKET

Copper alloy

MOVEMENT

Brass
CONNECTION
3
4" FPT

RANGES

15 to 100 psi

DIAL STANDARD
Single Scale psi

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted

WINDOW

Polycarbonate
WEIGHT 0.5 lb.

40

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Connection
Scale Standard
Mounting style
0 to 15 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi

GAS TEST GAUGES

2"
Steel
Copper Alloy
3
4" FPT
psi
Bell Type
G33522
G33523
G33524
G33525

Hex Type
G33526
G33527
G33528
G33529

HVAC/R
SERVICEMANS TEST GAUGE
Recalibrator and Restrictor Standard
Heavy Duty Brass Case
Clam Shell Packaging Optional

Marsh Instruments Deluxe Servicemans Test Gauge is designed to assure the modern serviceman the best possible
gauge for testing refrigeration equipment. Corresponding, easy-to-read temperature scales are printed in red on the
inner arcs of the dial face.
Typical applications include testing, servicing and recharging AC and R systems.

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting/Case Style
Connection
Scale Standard
30" X 350 psi
30" X 350 psi
0 to 500 psi
0 to 500 psi
Set of (2) W0070 & W0072
30" X 350 psi
30" X 350 psi
0 to 500 psi
0 to 500 psi
30 x 500 psi
30 x 500 psi
0 to 800 psi
0 to 800 psi

SPECIFICATIONS

SERVICEMANS TEST GAUGES

2 2"
Brass
Copper Alloy
LM
1
8 NPT
psi & temperature (F)
W0070
W0070Q
W0072
W0072Q
W0074
W8070
W8070Q
W8072
W8072Q

ACCURACY

ASME Grade B - 3/2/3% (2% of

range across middle half of scale)

W8115
W8115Q
W8127
W8127Q

CASE SIZE

2 12" diameter

CASE MATERIAL
R-12, 22, 502
R-12, 22, 502
R-12, 22, 502
R-12, 22, 502
R-12, 22, 502

Carton
Clam Shell
Carton
Clam Shell
Carton Only

R-134a, 404A, 507

R-134a, 404A, 507
R-134a, 404A, 507
R-134a, 404A, 507

Carton
Clam Shell
Carton
Clam Shell

R-22, 407C, 410A

R-22, 407C, 410A
R-22, 407C, 410A
R-22, 407C, 410A

Carton
Clam Shell
Carton
Clam Shell

Polished brass

CASE STYLE

LM Lower Mount

TUBE & SOCKET

Copper Alloy

MOVEMENT

Brass with recalibrator

CONNECTION

8 NPT with Restrictor Standard

RANGES

0-500 psi, 30" Hg VAC to 120 psi

retarded to 350 psi

DIAL STANDARD

psi with corresponding temperature

scales

DIAL COLOR

Black markings on white with red

or blue temperature scales

POINTER

Aluminum, black painted

WINDOW

Beveled glass

RECALIBRATOR
Standard

WEIGHT 5 lb.
BLACK POINTER

1.27 [32.2]

2.76 [70.0]

2.1 [53.7]
MARSH
BELLOFRAM
Gauges Thermometers Needle Valves

9/16 HEX
[14.0 HEX]
RECALIBRATOR
DIAL, WHITE WITH RED
AND BLACK CHARACTERS

1/8 NPT
.37 [9.4]

Marsh
Instrument
Company

ALL DIMENSIONS ARE NOMINAL

41

HVAC/R Gauges
MANIFOLD GAUGE

Recalibrator and Restrictor Standard

Color Coded Cases, Reds & Blues
Overpressure Protection to 350 psi

These gauges are designed for the pressure measurement of refrigeration systems. All dials are furnished with
corresponding temperature scales for the various refrigerants. Dials feature R-12, R-22, and R-502. Standard
connections are 1 8 NPT lower mount with your choice of red or blue case.
Marsh Manifold Gauges are used in refrigeration applications for testing, servicing, and recharging AC and R
Systems.

SPECIFICATIONS
ACCURACY

ASME Grade B - 3/2/3% (2% of

range across middle half of scale)
CASE SIZE: 2 12" diameter

CASE MATERIAL

Steel or plastic, red or blue

TUBE & SOCKET

Copper alloy

MOVEMENT

Brass with recalibrator

CONNECTION

8 NPT with Restrictor Standard

RANGES

0-500 psi, 30" Hg VAC to 120 psi

retarded to 350 psi

DIAL STANDARD

psi with corresponding temperature

scales

DIAL COLOR

Black markings on white with red

or blue temperature scales

POINTER

Aluminum, black painted

WINDOW

Impact resistant plastic

RECALIBRATOR

STANDARD RANGES & PART NUMBERS

TYPE

MANIFOLD GAUGES

Size
Case Material
Internals
Mounting/Case Style
Connection
Scale Standard
30" X 350 psi
30" X 350 psi
0 to 500 psi
0 to 500 psi
30 X 350 psi
30 X 350 psi
0 to 500 psi
0 to 500 psi
30 X 500 psi
30 X 500 psi
0 to 800 psi
0 to 800 psi
30 X 350 psi
0 to 500 psi
30" X 350 psi
0 to 500 psi

212"
Steel
Copper Alloy
LM
1
8 NPT
psi & temperature (F)
W0011
R-12, 22, 502
W0011Q
R-12, 22, 502
W0023
R-12, 22, 502
W0023Q
R-12, 22, 502
W8011
R-134a, 404A & 507
W8011Q
R-134a, 404A & 507
W8023
R-134a, 404A & 507
W8023Q
R-134a, 404A & 507
W8015
R-22, 407C & 410A
W8015Q
R-22, 407C & 410A
W8027
R-22, 407C & 410A
W8027Q
R-22, 407C & 410A
J7622PQ-001
R-12, 22, 502
J7662PQ-001
R-12, 22, 502
J7622PQ-002 R-134a, 404A & 507
J7662PQ-002 R-134a, 404A & 507

Blue Case
Blue Case
Red Case
Red Case
Blue Case
Blue Case
Red Case
Red Case
Blue Case
Blue Case
Red Case
Red Case
S/S Case
S/S Case
S/S Case
S/S Case

Carton
Clam Shell
Carton
Clam Shell
Carton
Clam Shell
Carton
Clam Shell
Carton
Clam Shell
Carton
Clam Shell
Clam Shell
Clam Shell
Clam Shell
Clam Shell

Standard

WEIGHT 0.5 lb

BLACK POINTER

400

30

100

12
0

0
-4

R22
RR4 407
10 C
A

Vibration
Free

?F
AD

J US T

80
0

0
-4
00
60 3
00
02
60 4
0
20

100

40

160

90

100

2.83 [72.0]

700

80

12
0

70

50

15

200

130

160
150 160

6 00 0

50 60

120

0
14

80

110

140

90

1.21 [30.7]

psi

2.13 [54.0]
MARSH
BELLOFRAM

9/16 HEX
[14.0 HEX]
RECALIBRATOR
1/8 NPT
DIAL, BLACK WITH WHITE CHARACTERS
EXCEPT LIGHT GREEN R-22 SCALE, BROWN
R-407C SCALE, & ROSE R-410A SCALE
ALL DIMENSIONS ARE NOMINAL

42

Gauges Thermometers Needle Valves

.42 [10.7]

Marsh
Instrument
Company

Liquid Filled
Liquid Filled
Liquid Filled
Liquid Filled

HVAC/R Gauges
REFRIGERATION AMMONIA GAUGE

Range 30" Hg to 150 psi or 300 psi

Case Sizes: 63mm and 3 12"
ASME Grade B

Marsh Ammonia Gauges include a restrictor that protects the gauge against sudden shock or pulsating pressure. The
inner dial arc shows pressure, outer arc shows the corresponding temperature scale. Marsh Refrigeration Ammonia
Gauges are available in a stainless steel case.
Marsh Instruments Refrigeration Ammonia Gauges are designed for use on ammonia compressors and other ammonia
refrigeration equipment.

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Scale Standard
Connection
30" Hg VAC to 150 psi
30" Hg VAC to 150 psi
30" Hg VAC to 300 psi
30" Hg VAC to 300 psi

NOTE:

REFRIGERATION AMMONIA GAUGES

63mm
Stainless Steel
Stainless Steel
LM
psi & Ammonia (F)
1
4 NPT
W0104
W0104Q
W0108
W0108Q

SPECIFICATIONS

312"
Stainless Steel
Stainless Steel
LM
psi & Ammonia (F)
1
4 NPT
W0112

ACCURACY

ASME Grade B 3/2/3% (2% of

range across middle half of scale)

CASE SIZES

63mm and 3 12" diameter

CASE MATERIAL

304 Stainless steel

CASE STYLE

W0116

Items are available on special order. However, minimums and lead times apply. Consult factory.

REFRIGERATION AMMONIA GAUGE OPTIONS

OPTION
TYPE
Fill Medium

Custom Dials

SUFFIX

Glycerine (GL)
Silicone (SL)
Logo or Custom face

P
PI
M

All Models
All Models
Consult factory for colors and minimums

LM Lower Mount
TUBE & SOCKET Stainless steel
MOVEMENT Brass
CONNECTION 14 NPT

RANGES

Compound 30" Hg Vac to 150 psi

or 30" Hg Vac to 300 psi

DIAL STANDARD

Single scale psi with corresponding

Ammonia temperature scales

DIAL COLOR

Black markings on white

POINTER

Aluminum, black painted

WINDOW Polycarbonate
RESTRICTORS Standard

PACKAGING

Optional clam shell packed gauges

are on 4 12" X 6 58" cards, prepunched for pegboard hanging

ALL DIMENSIONS ARE NOMINAL

63MM

312"

WEIGHT
63 mm
3 12"

0.5 lb.
1.0 lb.

PRESSURE RELIEF PLUG

.95 [24.2]

PRESSURE RELIEF PLUG

BLACK POINTER
.25 [6.4]

.95 [24.1]

BLACK POINTER

2.66 [67.5]

3.9
[99.1]

2.79 [70.9]

2.2 [55.6]
MARSH
BELLOFRAM
Gauges Thermometers Needle Valves

9/16 HEX
[14.0 HEX]

9/16 HEX
[14.0 HEX]
1/4 NPT

1/4 NPT
DIAL, BLACK WITH WHITE CHARACTERS

.37 [9.4]

Marsh
Instrument
Company

DIAL, WHITE WITH BLACK CHARACTERS EXCEPT

RED AMMONIA SCALE

.34 [8.7]

43

HVAC/R Gauges
REFRIGERATION GAUGE
Color Coded Dial
Adjustable Pointer Standard

Marsh Refrigeration Gauges are sturdily constructed and tested to give long, continuous, accurate service. In
addition to the standard pressure or compound scale, dials also show the corresponding temperature scales for R-12,
R-22, and R-502, in the various combinations shown in the chart below. Dial markings are sharp, clear and easy to read.
Marsh Instruments Refrigeration Gauges are designed specifically for use on refrigeration systems.

STANDARD RANGES & PART NUMBERS

SPECIFICATIONS
ACCURACY

ASME Grade B 3/2/3% (2% of

range across middle half of scale)

CASE SIZES

2 12" and 3 12" diameter

CASE MATERIAL

Steel, black painted

CASE STYLE LM Lower Mount
TUBE & SOCKET Copper alloy
MOVEMENT Brass

CONNECTION
8 or 14 NPT

RANGES

Compound 30" Hg Vac to 150 psi,

30" Hg Vac to 300 psi, 0 to 300 psi

DIAL STANDARD

psi with corresponding temperature

scales

DIAL COLOR

Black markings on white with red

temperature scales

TYPE

Size
Case Material
Internals
Mounting/Case Style
Connection
Scale Standard
R-12
30" Hg VAC 150 psi
0 to 300 psi

R-22
30" Hg VAC to 150 psi
R-12 & R-22
30" Hg VAC 150 psi
30" Hg VAC 300 psi
0 to 300 psi

NOTE:

REFRIGERATION GAUGES
2 12"
Steel
Copper Alloy
LM
1
8 NPT
psi and temperature (F)

3 12"

W0002
W0016

W0030
W0034

LM
1
4 NPT

W0032
W0004
W0012
W0018

Items are available on special order. However, minimums and lead times apply. Consult factory.

POINTER

Aluminum, black painted,

adjustable
WINDOW Acrylic Clearlok
RESTRICTORS Standard
OPTIONS Consult factory
WEIGHT 0.5 lb

2 12"

3 12"

ALL DIMENSIONS ARE NOMINAL

BLACK ADJUSTABLE POINTER

DIAL, WHITE WITH
BLACK CHARACTERS

1.25

BLACK ADJUSTABLE POINTER

2.77

1.3

3.72

2.78

2.1

9/16 SQUARE
9/16 SQUARE
1/8 NPT

44

.4

DIAL, WHITE WITH

BLACK CHARACTERS

1/4 NPT
.38

HVAC/R Gauges
CONTRACTORS GAUGE

4 12" Dial
Polished Stainless Steel Case
Adjustable Pointer
1% Accuracy

Marsh Instruments Contractors HVAC Service Gauge is a newly redesigned gauge with a long-life movement to meet
the needs of contractors in air conditioning, heating, plumbing and refrigeration. This rugged and reliable gauge is
economically priced and offers many features normally found on more expensive gauges such as adjustable pointer,
acrylic lens and polished stainless steel case.
Marsh Instruments Contractors Gauges are designed for use on plumbing and HVAC equipment.

SPECIFICATIONS

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
30" Hg VAC to 30 psi
30" Hg VAC to 160 psi
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 600 psi

CONTRACTORS GAUGES

ACCURACY

ASME Grade A 2/1/2% (1% of

range across middle half of scale)

412"
Polished Stainless Steel
Copper Alloy
LM
1
4 NPT
psi
W0480
W0487
W0481
W0483
W0484
W0486
W0488
W0490
W0492

CASE SIZE

4 12" diameter

CASE MATERIAL

Polished stainless steel

CASE STYLE

LM Lower Mount

TUBE & SOCKET

Copper alloy

MOVEMENT

Brass sector and pinion

CONNECTION
4 NPT

RANGES

Compound 30" Hg Vac to160 psi;

30 to 600 psi

DIAL STANDARD
Single scale psi

DIAL COLOR

CONTRACTORS GAUGE OPTIONS

OPTION
TYPE
Restrictors
Push Fit .008 or .018
Catalog dials
psi and kPa
All other dials - consult factory for lead time

SUFFIX
H
W3

AVAILABLE ON MODELS
all models
all models
25 Piece minimum

Black markings on white

POINTER

Aluminum, black painted

WINDOW
Acrylic

WEIGHT 1.0 lb

ADJUSTABLE BLACK POINTER

1.26

DIAL, WHITE WITH

BLACK CHARACTERS

4.8

3.48

9/16 SQUARE
1/4 NPT

.38

ALL DIMENSIONS ARE NOMINAL

45

HVAC/R Gauges
HEATING SYSTEM GAUGE

Adjustable Set Hand

Ranges to 300 psi and 690 Feet of Water
3 12" and 4 12" Dials

Marsh Instruments Heating System Gauges are available in 3 1 2" and 4 1 2" dial sizes in the most popular ranges. An
adjustable red altitude pointer is standard on feet-of-water gauges. This feature allows the user to indicate the head
of water to be maintained in the system.
Marsh Instruments Heating System Gauges provide accurate psi and feet-of-water measurements in elevated tanks,
reservoirs, standpipes, and similar applications where reliability and dependability are crucial in heating system
equipment.

STANDARD RANGES & PART NUMBERS

SPECIFICATIONS
ACCURACY

3 12" ASME Grade B 3/2/3%

(2% of range across middle half of
scale)
4 12" ASME Grade A 2/1/2%
(1% of range across middle half of
scale)
CASE SIZE 3 12" and 4 12" diameter

CASE MATERIAL

3 12": Steel, black painted

4 12": Aluminum back flange case,
black painted
CASE STYLE LM Lower Mount
TUBE & SOCKET Copper alloy

MOVEMENT

3 2": Brass
4 12": Stainless steel
CONNECTION 14 NPT
1

TYPE

HEATING SYSTEM HVAC/R GAUGES

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standards
0 to 15 psi and 0 to 30 ft H20
0 to 30 psi and 0 to 70 ft H20
0 to 100 psi and 0 to 230 ft H20
0 to 150 psi and 0 to 345 ft H20
0 to 160 psi and 0 to 370 ft H20
0 to 200 psi and 0 to 460 ft H20
0 to 300 psi and 0 to 690 ft H20

NOTE:

312"
Steel
Copper Alloy
LM
1
4 NPT
psi, ft. H20 and metric
W0450
W0451
W0452
W0453
W0454

HEATING SYSTEM GAUGE OPTIONS

DIAL STANDARD

Restrictors

psi, ft. H 2 O and metric

DIAL COLOR

Black markings on white

W0460
W0461

Items are available on special order. However, minimums and lead times apply. Consult factory.

RANGES

Dual Scale 15 to 300 psi and 300

to 690 ft. H 2 0

412"
Aluminum
Copper Alloy
LM
1
4 NPT
psi, ft. H20 and metric
W0456
W0457
W0458
W0459

OPTION

TYPE

Custom Dials

Logo or Custom face

Special Restrictor

SUFFIX AVAILABLE ON MODELS

H

All models

Consult factory for colors and minimums

POINTER

Aluminum, black painted with red

set hand

312" Steel

WINDOW

3 12": Acrylic Clearlok

4 12": Instrument Glass

WEIGHT
3 12"
4 12"

2.0 lb.
2.0 lb.

412" Aluminum

ALL DIMENSIONS ARE NOMINAL

BLACK POINTER
DIAL, WHITE WITH
BLACK CHARACTERS

BLACK MICROMETER POINTER

1.1

2.87

4.92

3.7

2.75

4.28

9/16 SQUARE
RED MARKING POINTER

1/4 NPT

3/4 ACROSS
WRENCH FLATS

.4

.23 DIA THRU, 3 HOLES EQUALLY

SPACED ON A 5.375 DIA BC
DIAL, WHITE WITH
BLACK CHARACTERS

46

1/4 NPT

1.5

Special Applications
WATER TEST GAUGE

Connects Directly to Standard Water Faucet or Hose

Measures Commercial & Residential Water Pressure
Dual Scale Dial

Marsh Water Test Gauge is designed to connect directly to a standard 34" water faucet or hose. The maxi pointer
included on the Water Test Gauge allows you to monitor a peak operating or surge pressure point.
Typical applications include measuring residential and commercial water pressure, also selection and adjustment of
valves, regulators, and other controls.

STANDARD RANGES & PART NUMBERS

TYPE

Size
Internals
Case Materials
Mounting/Case Style
Connection
Scale Standard
Window
Part Number

SPECIFICATIONS

WATER TEST GAUGES

2 12"
Copper Alloy
Steel
Top mount
3
4"-11 12" NH female hosebib
psi/kPa
Acrylic
G24545

ACCURACY ASME

Grade B 3/2/3% (2% of range

across middle half of scale)

CASE SIZES

2 12" diameter

CASE MATERIAL

Steel, black painted

Acrylic w/maxhand
G24545-001

CASE STYLE
Top mount

TUBE & SOCKET

Copper alloy

MOVEMENT

Brass
CONNECTION
3
4" 11 12" NH Female hosebib
3/4-11 1/2 NH HOSE CONNECTION

RANGES

0 to 300 psi

.39
[10.0]

DIAL STANDARD

Dual scale psi and kPa

RED MAXIMUM
INDICATING POINTER

DIAL COLOR

9/16 SQUARE

BLACK POINTER

Black markings on white

POINTER

2.76
[70.0]

Aluminum, black painted

WINDOW

Acrylic with or without red

maximum indicating pointer

2.45
[62.2]

OPTIONS

Other ranges are available

Consult factory
WEIGHT 0.5 lb

DIAL, WHITE WITH

BLACK CHARACTERS

1.60
[40.7]

ALL DIMENSIONS ARE NOMINAL

47

Special Applications
PAPER MACHINE GAUGE

Hinged Ring Chrome Plated Steel Case

Protective Weather Tight Seal
Restrictor is Standard

Marsh Instruments Chrome Plated Paper Machine Gauges are available in nine ranges and fit existing panel cutouts.
The heavy-duty case features a front flanged/ hinged ring design which allows easy access to the recalibrator and
a weephole that prevents condensation buildup. A restrictor is standard. The Marsh Paper Machine Gauge is available in 3 12" size only. Each gauge has a weather-tight seal to protect against dust and atmospheric contaminates.
Marsh Instruments Paper Machine gauges are specifically designed to meet the demands of the pulp and
paper industry.

SPECIFICATIONS
ACCURACY

ASME Grade A 2/1/2% (1%

of range across middle half of
scale)

CASE SIZES

3 12" diameter

CASE MATERIAL

Steel, chrome plated

CASE STYLE

LBM Lower Back Mount

TUBE & SOCKET

Copper alloy

MOVEMENT

Stainless Steel with recalibrator

CONNECTION
4 NPT

RANGES

30 to 1,000 psi

STANDARD RANGES & PART NUMBERS

TYPE

Size
Case Material
Internals
Mounting / Case Style
Connection
Scale Standard
0 to 30 psi
0 to 60 psi
0 to 100 psi
0 to 160 psi
0 to 200 psi
0 to 300 psi
0 to 400 psi
0 to 600 psi
0 to 1,000 psi

PAPER MACHINE GAUGES

312"
Steel, Chrome Plated
Copper Alloy
LBM
1
4 NPT
psi
W6042
W6046
W6048
W6052
W6054
W6058
W6060
W6064
W6072

Single scale psi

PAPER MACHINE GAUGE OPTIONS

OPTION
TYPE

POINTER

Catalog Dials

DIAL STANDARD
DIAL COLOR

Black markings on white

Aluminum, black painted

Restrictor

WINDOW

Glass lens, chrome plated brass

ring with weather-tight seal

RESTRICTOR
Standard

WEIGHT 1.0 lb
Custom Dials

Special Restrictor
No restrictor
bar only
kg/cm2 only
kPa only
MPa only
psi & bar
psi & kg/cm2
psi & kPa
psi & MPa
Logo or custom face

PAPER MACHINE GAUGE DIMENSIONS

48

SUFFIX
H
H1
L1
L2
L3
L4
W1
W2
W3
W4
M

AVAILABLE ON MODELS
See Marsh Price List for minimum

Consult factory for colors and minimums

PART#

DESCRIPTION

GAUGE COCK AND SIPHONS

4" F x 14"F Brass Gauge Cock (T-Handle #123)
1
4" M union x 14" F Brass Gauge Cock (Lever Handle #125)
1
4"M x 14"M Steel Straight Siphon (600psi @ 400F)
1
4"M x 14"M Brass Straight Siphon (250psi @ 400F)
1
4"M x 14"M Steel Angle Type Siphon (600psi @ 400F)
1
4"M x 14"M Brass Angle Type Siphon (250psi @ 400F)

111025
111028
111029
111030
111031
111032

CLEARLOK (ACRYLIC) CONVEX WINDOW INTERNAL THREAD

G Series Fig. 83 Diaphragm Gauges
124602
212" for 83K & 83KC
127985
212" for 83KB & 83KD
125448-001 312" for all models (knurled edge)
CLEARLOK
W15CL
W20CL
W20CLUC
W25CL
W25CLUC
W35CL
W35CLUC

(ACRYLIC) WINDOWS (INTERNAL THREAD) J SERIES

112" for LM or CB
2" for LM or CB
2" for U-Clamp or Front Flange
212" for LM or CB
212" for U-Clamp or Front Flange
312" for LM or CB
312" for U-Clamp or Front Flange

100116-008
100116-013
100116-016

RESTRICTOR SCREWS
8" & 14" NPT Threaded Brass 8-40
AIR (.008)
WATER (.013)
OIL (.016)
1

RESTRICTOR SCREWS
LARGE DIAL (D, E, H, & P)
1
4" & 12" NPT Threaded Brass M5 X 0.8
RES008BRLD AIR (.008)
RES013BRLD WATER (.013)
RES016BRLD OIL (.016)

RES018SSLD
150139-013
150139-018
150139-025
150139-040

RES018PB
RES013PB
RES025PB
RES040PB

RESTRICTOR SCREWS
LARGE DIAL (D, E, H, & P)
1
4" & 12" NPT Threaded 316 SST M5 X 0.8
All Apps. (.018)

RESTRICTOR SCREWS GENERAL SERVICE (J)

Air (.013)
Standard (.018)
Water (.025)
Oil (.040)
RESTRICTOR SCREWS
SEVERE SERVICE SERIES (J & X)
1
8", 14" & 12" NPT Push-In Brass
Standard (.018)
AIR (.013)
WATER (.025)
OIL (.040)

RESTRICTOR SCREWS
SEVERE SERVICE SERIES J & X
1
8", 14" & 12" Push-In 316 SST
RES018PBSS Standard (.018)

Parts & Accessories

PART#

DESCRIPTION

FRONT FLANGE (3-HOLE) CASE & WINDOW ASSY FOR BACK

CONNECT (CB) J Series Gauge
CS25FF
212" Front Flange Case
W25CLUC
212" Window Assembly
CS35FF
312" Front Flange Case
W35CLUC
312" Window Assembly
127656
133426

LIQUID FILL CONVERSION KIT

Silicone, 1000 cc, 1 quart
Glycerine, 1 quart

110983
110985

HAND JACK & DUPLEX HAND JACK

Duplex Hand Jack/Driver Set
Hand Jack (Pointer Remover)

PTR20ADJ-B
PTR25ADJ-B
PTR35ADJ-B
PTR45ADJ-B

ADJUSTABLE (SLOTTED) POINTER

Adjustable Pointer - 2"
Adjustable Pointer - 212"
Adjustable Pointer - 312"
Adjustable Pointer - 412"
MICROMETER POINTER, LARGE DIAL SERIES
412" Dial (D, H & P)
6" Dial (D, H & P)

PTRP45
PTRP60

PART#

DESCRIPTION

SEVERE SERVICE GAUGE ACCESSORIES

127794
Flange63
133279
Flange100

Adapter ring, 63mm to 212"

Front Flange for 63mm: C Case
Front Flange for 63mm: CB or UC case (no holes)
Front Flange for 100mm: C Case

CERTIFICATION FORMS

134476
134477
134478
134479
134480
134481

PART#
S20BD
S20BE
S20BG
S20SD
S20SE
S20SG
S40BD
S40BE
S40BG
S40SD
S40SE
S40SG

Material Certification
Certificate of Conformance
Certificate of Compliance
Certificate of Origin
Certificate of Calibration
Certificate of Accuracy

DESCRIPTION

MEDIA

4 NPT, Brass
4 NPT, Brass
1
4 NPT, Brass
1
4 NPT, 303SS
1
4 NPT, 303SS
1
4 NPT, 303SS
1
2 NPT, Brass
1
2 NPT, Brass
1
2 NPT, Brass
1
2 NPT, 303SS
1
2 NPT, 303SS
1
2 NPT, 303SS

Heavy Oil
Water & Light Oil
Air & Gases
Heavy Oil
Water & Light Oil
Air & Gases
Heavy Oil
Water & Light Oil
Air & Gases
Heavy Oil
Water & Light Oil
Air & Gases

MAX PRESSURES

INDUSTRIAL PRESSURE SNUBBERS

1
1

5,000 psi
5,000 psi
5,000 psi
15,000 psi
15,000 psi
15,000 psi
5,000 psi
5,000 psi
5,000 psi
15,000 psi
15,000 psi
15,000 psi

49

Diaphragm Seals

Diaphragm seals are isolation devices which separate pressure gauges and
other instruments from the process media while allowing the instrument to
measure the process pressure. The service life of the instrument is greatly
extended, because it is protected from corrosion, clogging, freezing, or pulsation.

LIQUID FILLINGS

The selection of the fill depends on the temperature expected in any given
application. Temperature ratings for available fillings are listed below.
Glycerine
0 to 400F
Silicone
40 to 600F
Syltherm
40 to 750F
12000

MODEL 12000 MINI

SERVICEABLE RUBBER
DIAPHRAGM SEAL

The Model 12000 Serviceable Mini

Diaphragm Seal is designed for gauges
and instruments with operating pressures of 2500 psi with stainless and
500 psi with PVC models. Ideally suited for small applications and corrosive
installations. The optional Easy Clean
Out feature allows the removal of the
process side housing without losing
the instrument side fill fluid. Fill /
bleed screw port in the instrument
side housing, and stainless steel build
screws are standard.
FILLED & CALIBRATED TO GAUGES
ONLY.

UPPER
316SS
1
4"
1
2"
PVC
1
4"
1
2"

LOWER
316SS
1
4"
1
2"
PVC
1
4"
1
2"

DIAPHRAGM
Nitrile
Fluorocarbon
Neoprene

22
24
52
54
22
24
52
54
3
4
5

EASY
CLEAN OUT
None
Clean Out

2 Across Flats

0
2

FILL
No Fill
Glycerine
Silicone
Syltherm

0
G
S
Y

2 Across Flats

B8498

MODEL B8498 GAUGE

PROTECTOR WITH
RUBBER DIAPHRAGM
SEAL

The Model B8498 Gauge Protector is

designed for extremely high volume
displacement. Ideally suited for gauges
and instruments with operating pressures up to 200 psi and vacuum applications. Available in 14" threaded connections and chrome plated zinc construction. A 38" flush plug is standard
in the process side housing.
FILLED & CALIBRATED TO GAUGES
ONLY.

50

ASSEMBLY
1
4"

DIAPHRAGM
Nitrile
Fluorocarbon
Neoprene
FILL
No Fill
Glycerine
Silicone
Syltherm

22
3
4
5
0
G
S
Y
ALL DIMENSIONS ARE NOMINAL

Diaphragm Seals
UPPER
316SS
1
4"

13000
22

LOWER
316SS
1
4"
1
2"
Hastelloy
1
4"
1
2"

1.5" HEX
22
24

42
44

DIAPHRAGM
316SS
Hastelloy C

1
2

FILL
No Fill
Glycerine
Silicone
Syltherm

UPPER
316SS
1
4"
1
2"

MODEL 13000 MINI /

ALL WELDED
DIAPHRAGM SEAL

1.5"

0
G
S
Y

The Model 13000 Mini Welded Seal

is designed for 2" to 312" bourdon tube
gauges with a minimum range of
0-100 psi. The maximum operating
pressure is 2000 psi at 100 F.
Available in all 316 SS or Hastelloy C
process housing and diaphragm.
FILLED & CALIBRATED TO GAUGES
ONLY.

13040

LOWER
316SS
1
4"
1
2"
3
4"
1"
Hastelloy
1
4"
1
2"
3
4"
1"

DIAPHRAGM
316SS
Hastelloy C

FLUSH
CONNECTION
None
1
4"
FILL
No Fill
Glycerine
Silicone
Syltherm

1.53"

22
24
22
24
26
28
42
44
46
48

1
2
0
2
0
G
S
Y

2.5" HEX

MODEL 13040 ALL

WELDED
DIAPHRAGM SEAL

The Model 13040 All Welded Seal is

designed for 2" to 412" bourdon tube
gauges with pressure ranges from
vacuum to 1000 psi. Available in all
316SS or Hastelloy C process housing and diaphragm, with threaded
connections. Optional flushing
connections also available.

1.66"

FILLED & CALIBRATED TO GAUGES

ONLY.

2.5"

ALL DIMENSIONS ARE NOMINAL

51

Diaphragm Seals

MODEL 14000 REMOVABLE DIAPHRAGM SEAL

The Model 14000 Diaphragm Seal is a

clamped metal design featuring interlocking construction inside the bolt
circle for perfect alignment. The upper
and lower housings clamp the
diaphragm in place and allow for field
servicing. The 14000 is available in
threaded connections for pressures
from vacuum to 2500 psi. Fill/bleed
port screw in the upper is standard
and an optional flush connection is
available.
FILLED & CALIBRATED TO GAUGES
ONLY.

UPPER
Steel
1
4"
1
2"
316SS
1
4"
1
2"
LOWER
Steel
1
4"
1
2"
3
4"
1"
316SS
1
4"
1
2"
3
4"
1"

14000

DIAPHRAGM
316SS
Hastelloy C
Tantalum
FLUSH CONNECTION
None
1
4"
BOLTS & NUTS
Steel
Stainless
FILL
No Fill
Glycerine
Silicone
Syltherm

12
14
22
24
12
14
16
18

INST CONN

22
24
26
28

25/8"

1
2
3

31/2"
PROCESS CONN

0
2
0
1
0
G
S
Y

UPPER
Steel
1
4"
1
2"
316SS
1
4"
1
2"

INST CONN

MODEL 14040 WELDED

DIAPHRAGM SEAL

The Model 14040 Welded Diaphragm

Seal is a welded diaphragm-to-upper
design allowing the upper housing to
be removed with the instrument in
place without losing fill. The same
interlocking feature as the 14000 is
used to assure alignment of the upper
to the lower. Available in threaded
connections for pressures from vacuum to 2500 psi. Fill/bleed port screw
in the upper is standard and an optional flush connection is available.
FILLED & CALIBRATED TO GAUGES
ONLY

52

25/8"

31/2"
PROCESS CONN

14040

22
24

LOWER
Steel
1
4"
12
1
2"
14
3
4"
16
1"
18
316SS
1
4"
22
1
2"
24
3
4"
26
1"
28
DIAPHRAGM
316SS
1
Hastelloy C
2
Tantalum
3
FLUSH CONNECTION
None
0
1
4"
2
BOLTS & NUTS
Steel
Stainless

ALL DIMENSIONS ARE NOMINAL

12
14

FILL
No Fill
Glycerine
Silicone
Syltherm

0
1
0
G
S
Y

Temperature
HOT WATER THERMOMETER
1% of span throughout entire range
Aluminum stem and case material
Bi-metallic element

Thermometer is available with standard 12" or

3
4" NPT male separable socket or 12" or 34"
sweatwell connection that allows easy thermometer removal while maintaining a
sealed system.
Marsh Instruments Hot Water Thermometers
are designed for accurate temperature readings in hot water lines, boilers and hydronic
systems.

DESCRIPTION

P/N

2 NPT

L8004-1

4 NPT

L8004-2

2" sweatwell

L8004-3

4" sweatwell

L8004-4

SPECIFICATIONS
ACCURACY

1% of span throughout entire range

3/4-14

1.013

CASE SIZE

2 12" Diameter

.946

.436

CASE MATERIAL
Aluminum

.901

1.064

STEM

Aluminum

.407

MOVEMENT

Bi-metallic element

.036

.401

.707

.853

CONNECTION

2 or 34 NPT Center Back,

2 or 34" Sweatwell Center Back

1
1

1/2-14
.801 .433

.864

.936

r 1/32

.028

.675

RANGE

.737

30-250F & 0-120C

.706

DIAL COLOR

White with Black & Red Markings

POINTER

Aluminum, Black Painted

.409

.343

RECALIBRATOR
Standard

.704
.516
.433

.783 .872
.877
.0851

.4124

.801

r 15/64

.972
1.314
1.998

R 3/64
.468
.536
.444
.322
2.310
2.498

.352
.751 2.033
1.709
.090
2.324

ALL DIMENSIONS ARE NOMINAL

53

Temperature
BIMETAL THERMOMETERS

External Reset Feature for Field Recalibration (3" & 5")

9 Dual Scale Ranges to 1,000F (525C)
Hermetically Sealed Case Design

2", 3" and 5" Dials

Stem Lengths to 24"
1% Full Scale Accuracy

Marsh Instruments Bimetal Thermometers combine the benefits of economy and reliability for local mounted temperature
indication in the dual scale ranges from -50 to 1,000F (-40 to 525C). Additional advantages offered by the Series L
Bimetal Thermometers include an easy-to-read dual scale, fast speed of response, and accurate temperature indication. The
hermetically sealed and ruggedly built case is resistant to shock, vibration, dust and moisture. Corrosion resistance to most
chemicals is provided by the all welded type 304 Stainless Steel construction. The extremely responsive bimetal sensing
element provides an accuracy to within 1% of scale. An external adjustment screw on the back of the 3" and 5" case
provides convenient reset and field recalibration. Built-in over range protection is a standard feature.
Typical applications include process, offshore, power, chemical industries, HVAC and OEM applications.

SPECIFICATIONS
ACCURACY

1% of span throughout entire

range for 2" immersion in liquids,
4" in gases

CASE SIZES

2", 3", and 5" sizes

CASE MATERIAL

304 Stainless steel

STEM

2 12", 4", 6", 9", 12", 15", 18" &

24" Stainless Steel; 14" diameter

CONNECTIONS

1
4" NPT: CBCenter Back
connection (2" case only)
1
2" NPT: CBCenter Back connection or AJAdjustable connection
(3" & 5")

DIALS

Dual scale in degrees Celsius and

Fahrenheit

WINDOW

Glass, hermetically sealed

54

STANDARD RANGES & PART NUMBERS

TYPE

Size
Connection
Mounting
Stem Length
-50 to 120F /-40 to 50C
-40 to 160F /-40 to 70C
0 to 200F /-20 to 90C
0 to 250F /-20 to 120C
50 to 300F / 10 to 150C
50 to 400F / 10 to 200C
50 to 550F / 10 to 300C
150 to 750F / 70 to 400C
200 to 1000F / 100 to 525C

BIMETAL THERMOMETERS
2"
1
4 NPT
CB
2 12"
L11101
L11102
L11104
L11105
L11106
L11107
L11108
L11110
L11111

CB
4"
L11201
L11202
L11204
L11205
L11206
L11207
L11208
L11210
L11211

CB
6"
L11301
L11302
L11304
L11305
L11306
L11307
L11308
L11310
L11311

CB
9"
L11401
L11402
L11404
L11405
L11406
L11407
L11408
L11410
L11411

CB
12"
L11501
L11502
L11504
L11505
L11506
L11507
L11508
L11510
L11511

Size
Connection
Mounting
Stem Length
-50 to 120F /-40 to 50C
-40 to 160F /-40 to 70C
0 to 200F /-20 to 90C
0 to 250F /-20 to 120C
50 to 300F / 10 to 150C
50 to 400F / 10 to 200C
50 to 550F / 10 to 300C
150 to 750F / 70 to 400C
200 to 1000F / 100 to 525C

3"
1
2 NPT
CB
212"
L31101
L31102
L31104
L31105
L31106
L31107
L31108
L31110
L31111

CB
4"
L31201
L31202
L31204
L31205
L31206
L31207
L31208
L31210
L31211

CB
6"
L31301
L31302
L31304
L31305
L31306
L31307
L31308
L31310
L31311

CB
9"
L31401
L31402
L31404
L31405
L31406
L31407
L31408
L31410
L31411

CB
12"
L31501
L31502
L31504
L31505
L31506
L31507
L31508
L31510
L31511

Size
Connection
50 to 120F/-40 to 50C
40 to 160F/-40 to 70C
0 to 200F/-20 to 90C
0 to 250F/-20 to 120C
50 to 300F/ 10 to 150C
50 to 400F/ 10 to 200C
50 to 550F/ 10 to 300C
150 to 750F/ 70 to 400C
200 to 1000F/ 100 to 525C

3" Adjustable Angle

1
2 NPT
L33101
L33201
L33102
L33202
L33104
L33204
L33105
L33205
L33106
L33206
L33107
L33207
L33108
L33208
L33110
L33210
L33111
L33211

L33301
L33302
L33304
L33305
L33306
L33307
L33308
L33310
L33311

L33401
L33402
L33404
L33405
L33406
L33407
L33408
L33410
L33411

L33501
L33502
L33504
L33505
L33506
L33507
L33508
L33510
L33511

CB
15"
L31601
L31602
L31604
L31605
L31606
L31607
L31608
L31610
L31611

L33601
L33602
L33604
L33605
L33606
L33607
L33608
L33610
L33611

Temperature

STANDARD RANGES & PART NUMBERS

TYPE

BIMETAL THERMOMETERS

Size
Connection
Mounting
Stem Length
50 to 120F/-40 to 50C
40 to 160F/-40 to 70C
0 to 200F/-20 to 90C
0 to 250F/-20 to 120C
50 to 300F/ 10 to 150C
50 to 400F/ 10 to 200C
50 to 550F/ 10 to 300C
150 to 750F/ 70 to 400C
200 to 1000F/ 100 to 525C

5"
1
2 NPT
CB
212"
L51101
L51102
L51104
L51105
L51106
L51107
L51108
L51110
L51111

Size
Connection
Mounting
Stem Length
50 to 120F/-40 to 50C
40 to 160F/-40 to 70C
0 to 200F/-20 to 90C
0 to 250F/-20 to 120C
50 to 300F/ 10 to 150C
50 to 400F/ 10 to 200C
50 to 550F/ 10 to 300C
150 to 750F/ 70 to 400C
200 to 1000F/ 100 to 525C

CB
4"
L51201
L51202
L51204
L51205
L51206
L51207
L51208
L51210
L51211

5" Adjustable Angle

1
2 NPT
AJ
AJ
212"
4"
L53101 L53201
L53102 L53202
L53104 L53204
L53105 L53205
L53106 L53206
L53107 L53207
L53108 L53208
L53110 L53210
L53111 L53211

L11XXX

CB
6"
L51301
L51302
L51304
L51305
L51306
L51307
L51308
L51310
L51311

CB
9"
L51401
L51402
L51404
L51405
L51406
L51407
L51408
L51410
L51411

CB
12"
L51501
L51502
L51504
L51505
L51506
L51507
L51508
L51510
L51511

CB
15"
L51601
L51602
L51604
L51605
L51606
L51607
L51608
L51610
L51611

CB
18"
L51701
L51702
L51704
L51705
L51706
L51707
L51708
L51710
L51711

CB
24"
L51801
L51802
L51804
L51805
L51806
L51807
L51808
L51810
L51811

AJ
6"
L53301
L53302
L53304
L53305
L53306
L53307
L53308
L53310
L53311

AJ
9"
L53401
L53402
L53404
L53405
L53406
L53407
L53408
L53410
L53411

AJ
12"
L53501
L53502
L53504
L53505
L53506
L53507
L53508
L53510
L53511

AJ
15"
L53601
L53602
L53604
L53605
L53606
L53607
L53608
L53610
L53611

AJ
18"
L53701
L53702
L53704
L53705
L53706
L53707
L53708
L53710
L53711

AJ
24"
L53801
L53802
L53804
L53805
L53806
L53807
L53808
L53810
L53811

L
STEM LENGTH

BLACK POINTER

BLACK POINTER
DIAL, SILVER WITH
BLACK CHARACTERS

.438

DIAL, SILVER WITH

BLACK CHARACTERS

L31XXX

.562

L
STEM LENGTH
.32
.75

2.34
3.28

.25 DIA

.25 OD
BULB

BULB
1/2 NPT

1/4 NPT

L33XXX
BLACK POINTER
.87
[22.0]

7/8 HEX

9/16 HEX

L53XXX

L51XXX

RECALIBRATOR

3.88
[98.5]
2.39
[60.7]

.67

BLACK POINTER

1/2 NPT

5.03
3.29
[83.5]

2.5 .03
STEM LENGTH

1/2 NPT
.31
RECALIBRATOR

STEM LENGTH

.67

BLACK POINTER

RECALIBRATOR
DIAL, WHITE WITH BLACK
CHARACTERS THRU 300?F
ANODIZED ALUMINUM WITH
BLACK CHARACTERS ABOVE
300F

DIAL, WHITE WITH BLACK CHARACTERS

.25
[6.4]

STEM LENGTH

.25 OD

5.03

BULB
1/2 NPT
7/8 HEX
DIAL, WHITE WITH BLACK
CHARACTERS EXCEPT ORANGE
ZONE FROM 250?F TO 300?F
OUTSIDE SCALE & CHARACTERS

ALL DIMENSIONS ARE NOMINAL

RECALIBRATOR

55

Temperature
POCKET THERMOMETER

1" Dial
304 Stainless Steel Hermetically Sealed Case
5" long stem
Protective Case with Stainless Steel Clip

Marsh pocket thermometers have a 1" dial, 304SS hermetically sealed case, 304SS 0.4mm diameter 5" long stem, and
plastic lens. The accuracy is 1.5% of scale range. Each unit comes with a protective case with SS clip, that allows
it to be safely carried in your pocket and also can be used to hold the thermometer in the medium to be tested.
Typical applications include the food industries, HVAC/R industries, and any applications requiring fast and accurate
temperature.

SPECIFICATIONS
ACCURACY

1.5% of span throughout entire

range

STANDARD RANGES & PART NUMBERS

PART NUMBER
L020E
L041E
L080E

CASE MATERIAL

304 Stainless Steel

DESCRIPTION & RANGE

1" dial, 5" stem, -40/160F

1" dial, 5" stem, 0/220F
1" dial, 5" stem, 50/550F

RANGES

-40/160F, 0/220F, 50/550F

DIGITAL POCKET THERMOMETER

3.5 Digit LCD display

ABS Plastic Case
5" long stem
Protective Case with Stainless Steel Clip

Marsh Digital Pocket Thermometers have a 3.5 digit LCD display, ABS case and a 304SS 5"long stem. The
accuracy is 2 F with an update time of 10 seconds. Each unit has an on-off switch for longer battery life and
comes with the protective carrying case.
Typical applications include the food industries, HVAC/R industries, and any applications requiring fast and accurate
temperature.

SPECIFICATIONS
ACCURACY
2 F

CASE MATERIAL
ABS Plastic

RANGE

-58 to 302 F / -50 to 150 C

56

STANDARD RANGES & PART NUMBERS

PART NUMBER
L021DG

DESCRIPTION & RANGE

3.5 digit display, 5" stem, -58 to 302 F / -50 to 150 C

Temperature
INDUSTRIAL THERMOMETER

Standard Well & Lagging Well Option

Mounting Options: Adjustable Angle
Easy to Read Dual Scale
5 Temperature Ranges
Aluminum or Molded Glass Fiber Case

Marsh Industrial Thermometers are designed for demanding applications. The large 9" scale permits easy reading at
longer distances. The glass-reinforced nylon case is lightweight yet rugged enough for demanding installations. The
adjustable stem can be locked into any position through a 180 arc. These thermometers are commonly used on hot
or chilled water lines in commercial/industrial buildings.
The Marsh Industrial Thermometers have a compact design that is well suited for limited space applications such as
diesel engines, steam turbines, reduction gears, pumps, condensers and pipelines.
STANDARD RANGES & PART NUMBERS

TYPE

Stem & Well

Dual Scale
Range
-40 to 110F /-40 to 40C
0 to 120F /-15 to 45C
0 to 160F /-15 to 65C
30 to 240F /0 to 115C
30 to 300F /0 to 150C
Stem & Well
Dual Scale
Range
-40 to 110F /-40 to 40C
0 to 120F /-15 to 45C
0 to 160F /-15 to 65C
30 to 240F /0 to 115C
30 to 300F /0 to 150C

TYPE

Process Connection
Material
Stem Length & Well Style
312" Standard
6" Standard
6" with 2" Lagging

Option

With 3 2" Stem

312" SW
F & C
1

3 2" (NO)
F & C
1

Y1210
Y1211
Y1212
Y1214
Y1216

3 2" LW
F & C
1

Y1202
Y1203
Y1204
Y1206
Y1208

Y1242
Y1243
Y1244
Y1246
Y1248

With 6" Stem

6" (NO)
F & C

6" SW
F & C

6" LW
F & C

Y1218
Y1219
Y1220
Y1222
Y1224

Y1226
Y1227
Y1228
Y1230
Y1232

Y1234
Y1235
Y1236
Y1238
Y1240

SEPARABLE SOCKETS (THERMOWELLS)

4 NPT
Brass

4 NPT
304 SST

223499-001
223371
223389

223502
223512
223538

INDUSTRIAL THERMOMETER OPTIONS

Case

SPECIFICATIONS

INDUSTRIAL THERMOMETERS 9" ADJUSTABLE

Type
Aluminum

Suffix
A

ACCURACY

1% of scale range

INDICATING COLUMN
Blue liquid fill

SCALE

Dual scale F & C.

White coated aluminum

SCALE LENGTH
9 inches

CASE MATERIAL

Molded black nylon,

glass fiber reinforced

WINDOW
Glass

CONNECTION & STEM

1 14"-18 swivel nut, for use with

separable socket. Adjustable
aluminum 3 12" or 6" stem with
360 rotation

SEPARABLE SOCKET (THERMOWELL) Choice of (NO) well, (SW)

Standard Brass Well, or (LW) 2"

Lagging Brass Extension Well.

Available on Models
All Models

57

Temperature
SUBMARINE THERMOMETER

5" Scale Size

V-Shaped aluminum scale with black markings
Lens front, red reading organic filled tube
Gray ABS Case
2" nominal stem length for 314" OA socket

Each thermometer is manufactured to a standard accuracy of 1% of span. Gray case with red reading spirit filled
tube with magnifying lens for easy readability. White aluminum scale with bold black graduations and figures.
Typical applications include diesel engines, steam turbines, pumps, condensers, pipelines, boilers and chillers.

SPECIFICATIONS
ACCURACY

1% of scale range

INDICATING COLUMN
Red liquid fill

SCALE

Dual scale F & C.

White coated aluminum

SCALE LENGTH
5 inches

CASE MATERIAL
Gray ABS

WINDOW
Glass

CONNECTION & STEM

4"-28" swivel nut, for use with

separable socket (thermowell).
3

STANDARD RANGES & PART NUMBERS

TYPE

Stem Length
Dual Scale

SUBMARINE THERMOMETERS
2"
F & C

Range
-40 to 110F /-40 to 40C
20 to 180F /-6 to 82C
30 to 240F /0 to 114C
50 to 400F /10 to 200C

TYPE

STRAIGHT

90 BACK ANGLE

Y1402
Y1404
Y1406
Y1408

Y1412
Y1414
Y1416
Y1418

THERMOWELL

Connection
Material
Stem/Well Length
2"/314" OA

2 and 34 NPT
Brass
1

223666
1/2"

3/4"

1/2"

2"

ALL DIMENSIONS ARE NOMINAL

THERMOWELL DIMENSIONS 34"-28" Female Thread (internal)

58

Temperature
TRIDICATORS

Back and Bottom Mounting Options

Rotatable Set Pointer
Rugged Construction
Three-Color Dial
Three Pressure Ranges
2 12" & 3 12" Sizes
Marsh Instruments Tridicators (Boiler Gauges) are designed and suitable for hot water heating systems. These
instruments indicate pressure in psi and altitude for pools and spas in feet of H 2 O; in F and C. All models feature
a set hand for setting the desired pressure and altitude of the installation.
Typical applications include hot water boilers, heated pools, spas and hot tubs.
STANDARD RANGES & PART NUMBERS

TYPE

TRIDICATORS

Size
Case Style
Case Material
Internals
Mounting/Case Style
Connection
Scale Standard
0 to 60 psi / 0 to 130 ft H20

2 12"
Round
Steel
Copper Alloy
CB
1
4 NPT
psi/Feet of Water
Y22026

0 to 100 psi / 0 to 230 ft H20

3 12"
Square
Steel
Copper Alloy
LBM
1
2 NPT
psi/Feet of Water
Y22006

3 12"
Square
Steel
Copper Alloy
LM
1
2 NPT
psi/Feet of Water
Y22002

Y22016

Y22012

Y22008

0 to 200 psi / 0 to 460 ft H20

0 to 300 psi / 0 to 680 ft H20

Y22004

Y22018

Y22006

RED POINTERS
1.5

ACCURACY

ASME Grade B=3/2/3% (2% of

range across middle half of scale)

CASE SIZ
E2 12" Round & 3 12" Square
CASE MATERIAL
Steel, black painted

CONNECTION

2 12" case: 14 NPT Center Back

Mount, 3 12" case: 12 NPT Lower
Mount or Lower Back Mount

PRESSURE RANGES

Dual scale in 4 ranges:

0 to 60 psi & 0 to 130 ft. of water
0 to 100 psi & 0 to 230 ft. of water
0 to 200 psi & 0 to 480 ft. of water
0 to 300 psi & 0 to 680 ft. of water

Y22014

TEMPERATURE RANGE

60 to 260F & 20 to 120C

DIALS Black markings on white
TUBE & SOCKET Copper Alloy

1.438

BLACK ALTITUDE POINTER

SPECIFICATIONS

1.94

3.67 SQ

POINTERS

Aluminum, red painted with black

painted set pointer

.97
.312 OD

WINDOW
2 12" Acrylic
3 12" Glass

BULB
1/2 NPT
DIAL, WHITE WITH BLACK CHARACTERS

Y22002

3.69

WINDOW
2 12" 2.0 lb.
3 12" 2.5 lb.

7/8 SQUARE

1.48

Y22026

80

180

RED POINTERS
psi

35

1.06

.875

1.94

15

120

3.69

60

DIAL, WHITE WITH

BLACK CHARACTERS

kPa

5
25

30

40MARSH

2.65
.312 OD

BULB

9/16 SQUARE
2.02

2.02

1/4 NPT

ALL DIMENSIONS ARE NOMINAL

0.32

0.32
1/2NPT

1/2NPT

59

Thermowells
THERMOWELLS

In-Stock Thermowells for fast delivery

Brass, 304 Stainless Steel or 316 Stainless Steel
Tapered or Straight Shank
0.260/0.385 Standard Bore Sizes
Threaded for easy connection

THERMOWELLS

1-3/4"
3/4"

5/8" DIA.

1/2" NPT

1/2" NPT

1/2" DIA.

.260" BORE

1/4"

.260" BORE
1/2" DIA.

3/4" NPT

1/4"

1-3/4"
3/4"

3/4" NPT

60

2-1/2"

1-1/8"

3/8"

1/2" NPT

PART #

S
STEM

U
INSERTION

WELL
MATERIAL

M3957K64
M3957K65
M3957K66
M3957K37
M3957K38
M3957K51
M3957K39
M3957K41
M3957K52
M3957K42
M3957K43
M3957K53
M3957K71
M3957K72
M3957K73
M3957K75
M3957K76
M3957K77
M3957K78
M3957K79

4
4
4
6
6
6
9
9
9
12
12
12
18
18
18
24
24
212
212
212

212
212
212
412
412
412
712
712
712
1012
1012
1012
1612
1612
1612
2212
2212
158
158
158

Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
304SS
316SS
Brass
304SS
316SS

M3957K11
M3957K21
M3957K54
M3957K12
M3957K22
M3957K55
M3957K13
M3957K23
M3957K56
M3957K44
M3957K45
M3957K57
M3957K84
M3957K85
M3957K86
M3957K87
M3957K88
M3957K89

4
4
4
6
6
6
9
9
9
12
12
12
18
18
18
24
24
24

2 12
2 12
2 12
4 12
4 12
4 12
7 12
7 12
7 12
10 12
10 12
10 12
16 12
16 12
16 12
22 12
22 12
22 12

Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS

M3957K67
M3957K68
M3957K69

1/2"NPT

3/4" DIA.
S

2-1/2"

.260" BORE

1/2" DIA.
1/4"

ALL DIMENSIONS ARE NOMINAL

212
212
212

118
118
118

Brass
304SS
316SS

Thermowells
THERMOWELLS

S
STEM

PART #

1-3/4"
3/4"

1/2" NPT

7/8" DIA.

1" NPT

2-1/2"
1/2" DIA.

.260" BORE

1/4"

ALL DIMENSIONS ARE NOMINAL

THERMOWELLS

M3957K46
M3957K47
M3957K58
M3957K48
M3957K49
M3957K59
M3957K91
M3957K92
M3957K93
M3957K94
M3957K95
M3957K96
M3957K14
M3957K15
M3957K16
M3957K18
M3957K19

PART #

3/4"

2-1/2"

1/2" NPT

.260" BORE

5/8" DIA.
1/2" NPT
S

1"

.260" BORE

1"

1/2" NPT

7/8" DIA.
1" NPT
S

1/4"

2-1/2"

1/2" NPT

3/4" DIA.
3/4" NPT

1/2" DIA.

1/2" DIA.
1/4"

2-1/2"

.260" BORE

1/2" DIA.
1/4"

M3957K24
M3957K25
M3957K26
M3957K27
M3957K28
M3957K29
M3957K4
M3957K5
M3957K6
M3957K8
M3957K9
M3957K31
M3957K32
M3957K61
M3957K33
M3957K34
M3957K62
M3957K35
M3957K36
M3957K63
M3957K115
M3957K116
M3957K117
M3957K118
M3957K119
M3957K121
M3957K122
M3957K123
M3957K124
M3957K125
M3957K126
M3957K131
M3957K132
M3957K133
M3957K134
M3957K135
M3957K136

U
INSERTION

4
4
4
6
6
6
9
9
9
12
12
12
18
18
18
24
24

S
STEM
9
9
9
12
12
12
18
18
18
24
24
6
6
6
9
9
9
12
12
12
18
18
24
24
24
9
9
9
12
12
12
18
18
18
24
24
24

2 12
2 12
2 12
4 12
4 12
4 12
7 12
7 12
7 12
10 12
10 12
10 12
16 12
16 12
16 12
22 12
22 12

U
INSERTION
4 12
4 12
4 12
7 12
7 12
7 12
13 12
13 12
13 12
19 12
19 12
2 12
2 12
2 12
4 12
4 12
4 12
7 12
7 12
7 12
13 12
13 12
19 12
19 12
19 12
4 12
4 12
4 12
7 12
7 12
7 12
13 12
13 12
13 12
19 12
19 12
19 12

T
LAG
4
4
4
4
4
4
4
4
4
4
4
2 34
2 34
2 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34
3 34

WELL
MATERIAL
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
304SS
316SS

WELL
MATERIAL
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS

61

Thermowells
THERMOWELLS

1/2" NPT

PART #

3/4"

1-3/4"

3/4" NPT

1/2" NPT

3/4"

1/2" NPT

5/8" DIA.

.260" BORE

1-1/16" DIA.

1/4"

1-3/4"

1"

1/4"

1/2" NPT

1/2" NPT

.260" BORE

7/8" DIA.

1-3/4"

1" NPT

1"

5/8" DIA.

.385"BORE

1-3/4"

3/4" NPT

3/4" DIA.
S

5/8" DIA.
1/4"

2-1/2"

.385" BORE

5/8" DIA.
1/4"

M3957K137
M3957K138
M3957K139
M3957K141
M3957K142
M3957K143
M3957K144
M3957K145
M3957K146
M3957K147
M3957K148
M3957K149
M3957K162
M3957K163
M3957K164
M3957K165
M3957K166
M3957K167
M3957K168
M3957K169
M3957K171
M3957K172
M3957K173
M3957K174
M3957K221
M3957K222
M3957K223
M3957K231
M3957K232
M3957K233
M3957K241
M3957K242
M3957K243
M3957K261
M3957K262
M3957K263
M3957K271
M3957K272
M3957K273
M3957K281
M3957K282
M3957K283

S
STEM
4
4
4
6
6
6
9
9
9
12
12
12
4
4
4
6
6
6
9
9
9
12
12
12
4
4
4
6
6
6
9
9
9
4
4
4
6
6
6
9
9
9

U
INSERTION
2 12
2 12
2 12
4 12
4 12
4 12
7 12
7 12
7 12
10 12
10 12
10 12
2 12
2 12
2 12
4 12
4 12
4 12
7 12
7 12
7 12
10 12
10 12
10 12
2 12
2 12
2 12
4 12
4 12
4 12
7 12
7 12
7 12
2 12
2 12
2 12
4 12
4 12
4 12
7 12
7 12
7 12

WELL
MATERIAL
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS
Brass
304SS
316SS

ALL DIMENSIONS ARE NOMINAL

62

Pressure Indicator
DIGITAL PRESSURE INDICATOR

Converts Pressure Input to LCD Digital Readout

High Accuracy in Lightweight, Portable Package
State of the Art Semi-Conductor

The Marsh Instruments Digital Pressure Indicator is portable, lightweight, hand-held testing and calibrating
instrument indicates pressure to 50 psig at accuracy levels of 0.50% of reading 1 count. A state-of-the-art
semiconductor-type pressure transducer converts pressure input to analog voltage, which is displayed on a 3 1 2 digit
LCD readout. Internal 9-volt rechargeable battery powers the indicator, and a zero adjust potentiometer
standardizes the transducer bridge at zero pressure for higher accuracy.
Marsh Instruments Handheld Digital Pressure Indicator and Calibrator is ideal for calibrating DP cells, I/Ps and P/Is.
The indicator tests installed instruments and transmitters, verifies operation and settings of valves and switches,
detects system leaks, and is used for other testing or maintenance applications.

RANGE

-14.7 to 50p
-14.7 to 60p
-14.7 to 200p

SPECIFICATIONS

DIGITAL PRESSURE INDICATOR

PART NUMBER

PNEUMATIC RANGE

Range:14.7 to 200 psig; with

corresponding inches of water
column and inches of mercury

4-DPP-20050-BBC
4-DP-20060-B3
4-DPP-20200-BBC

WETTED MATERIAL

Brass fitting, silicone wafer

diaphragm, suitable for instrument
air (clean & dry) or any clean, nonconductive fluid

NOTE: Connection: 16" quick connect tube fitting

Elec. Range: 0-200 MA
5

PRESSURE FITTING

16" quick-connect tube fitting

standard, with mating nickel-plated
brass locking quick-connector.
8" plastic hose with ferruleless 1 4"
OD has to coupling insert with
shutoff valve
5

(BNC for -B3)

DISPLAY

3 12" digit LCD, 12" high black

numerals on light background, with
polarity and low battery indicators

ACCURACY

0.5% of reading 1 count, must

be zeroed at barometric pressure

TEMPERATURE

Calibration range: 50-90F.

Operating range: 30-130F.
Effect of temperature outside calibration range is 0.01% per
degree F

POWER

Internal: 9-volt transistor battery,

Ni-Cad chargeable. External: 12volt adapter will power unit or
charge battery in approx. 14 hours.
Approximate operation is 8-10
hours per charge

CASE SIZE

3.60" wide x 5 34" long x 1.92"high,

ABS plastic

INCLUDES

Carrying case, battery charger, 8"

plastic hose, quick-connect fitting,
and technical manual

ALL DIMENSIONS ARE NOMINAL

63

Reference
SELECTION AND USE OF A PRESSURE GAUGE

When selecting a pressure gauge, it is important to consider the following factors to insure safety and accuracy:
1.
Pressure range
2.
Temperature range
3.
Conditions affecting wear of the system
4.
Case venting
5.
Pressure fluid composition
6.
Pressure fluid temperature
7.
Ambient conditions
8.
Method of mounting
9.
Required accuracy

PRESSURE RANGE: A range of 2 times the operating pressure is recommended for safety and extended gauge life. The operating pressure should
be limited to the middle 75% of range.

TEMPERATURE RANGE :

Ambient temperature for General Service (J) is -40 to 160F. Ambient temperature for Severe Service (J & X),
for Dry Gauges is -40 to 160F and for Liquid Filled is 0 to 140F.

SHOCK, VIBRATION, PULSATION, OR CORROSIVE ATMOSPHERE CONDITIONS: Liquid Filled Gauges have a fill
material to lubricate the movement and reduce friction and wear. When used with a restrictor these gauges absorb vibration and dampen pressure shock and
spikes. Liquid filling also prevents moisture or a corrosive atmosphere from affecting the gauge internals.
CASE VENTING :

Process (Series P) and Elite (Series W) have a internal diaphragm which compensates for atmospheric changes that could affect
the calibration of the filled gauge. Severe Service (Series J & X) and 100mm (Series HW) liquid filled gauges have an elastomeric vent fill plug tip
which can be easily cut to permit case venting.

PRESSURE FLUID COMPOSITION: Since the sensing element of a pressure gauge may be exposed directly to the measured medium,
consider the characteristics of this medium. It may be corrosive, it may solidify at various temperatures, or it may contain solids that will leave deposits inside the
sensing element. For pressure fluids that will not solidify under normal conditions or leave deposits, a Bourdon Tube Gauge is acceptable Diaphragm Chemical Seals
should be considered when gauge wetted parts are not compatible with the measured media. A chemical compatibility chart follows this section to aid in the selection of the proper sensing element or diaphragm seal material.

PRESSURE FLUID TEMPERATURE : Steam and other hot media may raise the temperature of the gauge components above safe working
limits of the sealed joints. In these cases it is recommended that a syphon, cooling tower or chemical seal be used in conjunction with the pressure gauge Diaphragm
Seals and remote capillary can also be considered for use with gauges or transducers which are subjected to very low or high ambient temperature.
AMBIENT CONDITIONS:

The normal ambient temperature range for Marsh Instruments gauges is -40 to 160F (-40 to +71C) for Dry Gauges, 4
to 140F (20 to 60C) for Glycerine filled gauges, and 40 to 140 F (40 to 60 C) for Silicone filled gauges. The error caused by temperature changes is
0.3% per 18F rise or fall, respectively. The reference temperature is 70F (20C). The correction is for the temperature of the gauge, and not the temperature
of the measured medium. Remote gauge mounting using a diaphragm seal and capillary line is one alternative for applications involving extreme ambient temperature.

Moisture and weather effects must also be considered. Liquid Filled Gauges prevent condensation build up. For outdoor use, stainless steel, brass, or
plastic cased gauges are recommended.

1-800-727-5646 SALES
1-304-387-4417 SALES FAX

64

Reference
PRESSURE GAUGE OPERATING PRINCIPLE

Bourdon tube pressure gauges are widely used in

all branches of industry. The construction is simple yet rugged, and operation does not require
any additional power source. The Bourdon tube
element is directly exposed to the medium being
measured and is normal made of copper alloy
(brass) or stainless steel as the application
demands.
The Bourdon tube measuring element is made of a
thin walled tube that is
either bent into a semicircle (C-Shape tube) or
spirally wound (coiled
safety tube). When
pressure is applied to
the measuring system
through the pressure
port, the pressure causes
the Bourdon tube to
straighten itself, thus causing the end piece to move
upward (or downward for
vacuum measurements). The movement of the end piece is
transmitted via the link to the movement. The movement converts the linear motion of the Bourdon tube end piece to a rotational movement which in turn causes the pointer to indicate the
measured pressure.
Bourdon tube pressure gauges are designed for the measurement of pressure
and vacuum and are generally suitable for all clean and non-clogging liquid and
gaseous media.
Various types of Bourdon tubes are used. C-shape Bourdon tubes are typically used for ranges to 1,000 psi. Higher
ranges use coiled Bourdon tubes for safety.
Bourdon tube pressure gauges are available to measure full vacuums, compound and pressure ranges from 0-10 psi to
0-20,000 psi with an accuracy from 0.25% to 3/2/3% of span (ASME Grade 3A to Grade B).

HOW THE DIAPHRAGM GAUGE WORKS

Diaphragm gauges are sensitive instruments used in low pressure applications not exceeding 10 psi. The diaphragm capsule is an elastic metal sensing element comprised of two
thin wall diaphragms whose sides are soldered together to
make the capsule.
Whenever air or gas enters the intake port (gauge
connection), it travels into the diaphragm capsule.
As vacuum or pressure is applied to the
diaphragm capsule, the walls of the capsule
expand and contract in response to the change
in pressure. This change is then transferred to
a rotating rod and arm that rest on the outside
of the capsule. The rotating rod is connected
to a geared movement through a linkage system. Connected to a shaft, this system then
drives the pointer over a dial marked in appropriate pressure or vacuum units.

65

Reference
CHEMICAL COMPATIBILITY TABLE

Diaphragm Seals**

Monel

316 SS

Brass or Bronze

Diaphragm Seals**

Monel

316 SS

Brass or Bronze

Diaphragm Seals**

Monel

316 SS

Brass or Bronze

The media being measured must be compatible with the wetted parts of the pressure instrument. To use the chart below, locate the media whose pressure is to be measured and select a suitable material from those available. This is a simplified chart and assumes the media temperature is 200F except for media with a * which must
be below 100F, Throttling devices and/or a liquid-filled instrument are recommended in applications with pulsation or vibration. These recommendations are only a guide,
as service life is dependent on temperature, concentrations, catalysts that may be added, or other conditions beyond our control. Consult factory for specific applications
and for any services not listed.
Pressure
Pressure
Pressure
Instrument
Instrument
Instrument
Material
Material
Material

Media Application
Media Application
Media Application
Acetone*2

Ethyl Oxide >99%

Palmitic Acid >99%*2

Acetic Acid <40%

Ferric Chloride <40%

Paraffin

Acetic Anhydride
Ferric Sulfate <10%

Phosphoric Acid <80%*2

Acetylene (Dry)

Ferrous Chloride <30%

Photographic Solutions

Acrolein 100%
Ferrous Sulfate <50%
Pickling Solutions

Air

Flurine Gas (Dry)

Picric Acid 10%

Alcohol, Ethyl

Formaldehyde <95%

Propane (Dry)

Aluminum Chloride.10%
Formic Acid*2
Potassium Chloride
Consult
Aluminum Sulfate 10-50%

Freons

Potassium Cyanide

Ammonia Gas

Furfural <10%
Potassium Permanganate

Ammonium Chloride <40%

Gallic Acid

Sea Water (Flowing)

Ammonium Nitrate <50%

Gas (for lighting)

Silver Nitrate <70%

Ammonium Sulfate <60%
Gasoline

Sodium Bicarbonate <20%

Aniline >99%

Glucose

Sodium Bisulfate<30%
Argon

Glycerine >99%

Sodium Carbonate <40%
Consult
Beer

Hydrobromic Acid
Sodium Chromate <60%

Benzidine>99%
Hydrochloric Acid
Sodium Cyanide
Consult
Benzene <50%

Hydrofluoric Acid
Sodium Hydroxide

Benzoic Acid <70%

Hydroflusilic Acid
Sodium Hypochlorite <25%
Benzol

Hydrogen 2

Sodium Phosphate, Tri <60%

Bordeaus Mixture

Hydrogen Peroxide <50%

Sodium Silicate <50%

Boric Acid <25%

Kerosene

Sodium Sulfide <50%
Consult
Bromine (Dry)
Lacquers

Stannous Chloride <10%

Butane

Lactic Acid <70%*2

Steam (Use siphon)

Butanol

Lysol

Stearic Acid

Butyric Acid <25%

Magnesium Chloride <40%

Sulfur Dioxide (Dry) >99%
Calcium Chloride <80%
Magnesium Sulfate

Sulfur Trioxide (Dry) >99%

Calcium Hydroxide <50%
Mercuric Chloride <60%

Sulfurous Acid
Carbon Dioxide

Mercury >99%
Tannic Acid <80%

Carbon Monoxide >99%

Methyl Chloride
Consult Factory Tanning Liquors
Consult
Chlorine (Dry)
Methyl Salicylate
Consult Factory Tartaric Acid <50%

Chlorine (Moist)*2
Milk

Tin Chloride (ous) <10%

Chloroform (Dry)

Naphtha >99%

Toluene >99%

Chromic Acid
Naphthalene >99%

Turpentine >98%

Citric Acid 10-50%

Nickel Chloride >99%

Vegetable Oils

Corn Oil

Nitric Acid <95%*2

Vinegar

Cottonseed Oil

Nitrogen

Water

Creosote (Crude)

Nitrous Oxide
Consult Factory Whiskey

Crude Oil (Sour) (Use NACE)

Oleic Acid

Zinc Chloride <35%*2
Crude Oil (Sweet)

Oxalic Acid*2
Zinc Sulphate <40%
Ethyl Acetate

Oxygen (Gas)1

1. Bronze and 316 Stainless Steel are acceptable for oxygen service, provided the instrument has been-cleaned for service and is free from oil.
2. Over 1000 psi entire system must be 316 Stainless Steel.

Factory

Factory

Factory

Factory

Factory

*Media temperature must be below 100F

**Any standard bourdon tube or material may be used in conjunction with a diaphragm seal the gauge selection should be taken into consideration the corrosive environment in which it is to operate.

66

Reference
ACCURACY TABLE
GAUGE PRODUCT
GENERAL SERVICE
GG Gauges

General Service Gauges

SEVERE SERVICE
40/50mm Severe Service
63mm Severe Service

100mm Severe Service

63mm Brass

100mm Brass

PRECISION SERVICE
Elite Stainless Steel

100mm Stainless Steel

Quality Series 100mm
HW Stainless Steel

PAGE #

HVAC/R
Contractors HVAC
Heating (Ft. H20)

Refrigeration Ammonia
Refrigeration
Serviceman
Manifold

SPECIAL APPLICATION
Water Test
Paper Machine

X-mas Tree Gauge

ASME B40.1 GRADE

14

17

19

1A

24

1A

21

1A

10

15
19

20
23

35

43

42

40
45
46
47

1.0%

0.50%
2/1/2%
3/2/3%

1A

A&B

39

3.0

44

3A

2A

6 (160MM)

1A

31

4 12"

1A

2A

41

30

1A
B

2A

0.25%

27

3A
2A

100MM

29

DIAPHRAGM GAUGE
Low Pressure

3 12"

Master Test
PROCESS
Process

63MM

25

Inspectors Test

2 12""

Quality
Test

ACCURACY 112"(40MM) 2 (50MM)

ACCURACY
Full Scale
Full Scale
Full Scale

1% over middle half of scale

2% over middle half of scale

67

Reference

0.000145

14.504

0.0145

0.1934

0.01934

0.4912

14.22

0.0625

0.01421

0.001421

0.0361

14.7

psi

0.00987

0.00001

0.987

0.000987

0.01316

0.001316

0.03342

0.968

0.00425

0.000967

0.000097

0.00246

0.0681

atms.

4019

401.9

0.00402

401.9

0.4012

5.358

0.536

13.61

394.1

1.732

0.3937

0.0394

407.2

27.71

"H 2 O

102,074

102.07

0.102

10,210

10.21

136.1

13.61

345.7

100,010

43.986

10

25.4

10,343

703.8

mmH 2 O

10,207

10.207

0.0102

1021

1.021

13.61

1.361

34.57

1,001

4.40

0.1

2.54

1,034.3

70.38

cmH 2 O

2321

2.321

0.00232

232.1

0.2321

3.10

0.310

7.858

227.6

0.227

0.0227

0.5775

235.1

16

oz./in 2

10.22.036

0.0102

0.00001

1.02

0.00102

0.0136

0.00136

0.0345

0.0044

0.001

0.001

0.00254

1.033

0.0704

Kg/cm 2

295.3

0.295

0.000295

29.53

0.0295

0.394

0.0394

28.96

0.1273

0.0289

0.00289

0.0795

29.92

2.036

"Hg

7500

7.05

0.0075

750

0.75

10

25.4

735.6

3.232

0.735

0.0735

1.866

760

51.715

750

0.75

0.00075

75

0.075

0.1

2.54

73.56

0.323

0.0735

0.00735

0.187

76

5.17

cm Hg

10,000

10

0.01

1000

13.33

1.333

33.86

980.7

4.31

0.98

0.098

2.488

1013

68.95

mbar

10

0.01

0.00001

0.001

0.01333

0.001333

0.0339

0.981

0.00431

0.00098

0.000098

0.00249

1.013

0.0689

bar

1,000,000

1,000

100,000

100

1333

133.3

3386

98,067

431

98

9.8

248.8

101,325

6895

Pa (N/m 2)

1,000

0.001

100

0.1

1.333

0.1333

3.386

98.07

0.431

0.098

0.0098

0.249

101.3

6.895

kPa

0.001

0.000001

0.1

0.0001

0.00133

0.000133

0.00339

0.0981

0.00043

0.0001

0.00001

0.00025

0.1013

0.0069

MPa

PRESSURE UNITS CROSS REFERENCE CHART

0.14504
9.869

mmHg
(Torr)

145.04

To use this chart:

1. Find the column with the units you want to convert from
2. Move down that column until you find the 1
3. Staying in the same row, move horizontally to the column with the units you are converting to
4. Multiply the number in that box by the amount you are changing from to get the converted value

68

Reference

PART NUMBER PREFIX GUIDE

Marsh Instrument part numbers begin with a letter prefix which helps identify the product

PREFIX PRODUCT TYPE

D
D
G
G
H
H
HW
J
J
L
P
W
W

W
X
Y
M
GG

SEE PAGES

Test Gauges
lnspectors Test Gauges
Diaphragm Gauges
Water Test Gauges
Quality Gauges
100mm Stainless Steel (L.F.)
100mm Welded Socket
General Service Gauges
63mm Severe Service Gauges (L.F.)
Bimetal Thermometers
Process Gauges
100mm Elite Gauges (L.F.)
HVAC/R (Heating System, Contractors,
Refrigeration Ammonia, Manifold)
Paper Machine
100mm Severe Service Gauges (L.F.)
Tridicators, Industrial Thermometers
40mm & 50mm Severe Service
Marshalltown Value Series

PART NUMBER SUFFIX GUIDE

29
32
37
47
27
22
23
12
17
54
33
26

40-46

48
19
59, 57
16
9

Marsh Instruments part numbers end with a letter suffix to denote a special feature or options.

SUFFIX

OPTION

Ring Options

Accuracy

C
D
E

two piece stem on severe service

Oxygen Cleaned
Single Scale psi only Dial

Window Options

G
H

Weatherproof case
Restrictors

Case Options

Metric Dial

M
P
R

Fill Options

Custom Name on Dial or Service

Printing
Liquid Filled product
Front Flange

DESCRIPTION

Friction-Black (FB)
Press-Black (PB)
Press-Chrome (PC)
Friction Chrome (FC)
ASME Grade 2A 0.5% (H%F);
ASME Grade 1A, 1.0% (1%F);
ASME Grade A 2-1-2% (1%H)
63mm Severe Service C

ABBREVIATIONS AND TERMS USED

p or psi Pounds per square inch
kPa

kilopascals

oz/in2

Ounces per square inch

Case
H20

The case style

Inches of water

ft. H20 Feet of water

Hg

VAC

Inches of mercury

Range is in vacuum

NOTE: Compound Ranges, where the gauge measures both vacuum and pressure
are designated as: 30" Hg VAC to 100p = measures from 30 inches of mercury
vacuum to 100psi pressure.
P

plain case (no flange or clamps)

3 holed front flange (no clamp)

G
H

UC

front flange case (with U-clamp)

back flange case

hinged ring case (front flange case with U-clamp and removable cover)
U-clamp case

CONNECTION : The process connection 18", 14", 12" NPT diameter of

connection (National Pipe Thread Standard)
LM

lower mount

CB

center back mount

LBM

lower back mount

REGISTERED TRADEMARKS: Viton, Teflon, & Delrin are registered trademarks

of the E.I. Dupont family of companies.

Safety Glass (SG)

Acrylic (AY)
Instrument Glass (GS)
Polycarbonate (PC)
Silicone (SL)
Glycerine (GL)
Phenolic (PH); Brass (BR)
Chrome (CR); Stainless Steel (SS)
Polypropylene Turret (TR)
L1 -Bar Only
L2-kg/cm2 Only
L3-kPa Only
L4-MPa only

W1 -psi & Bar

W2-psi & kg/cm2
W
Dual Scale
W3-psi & kPa
W4-psi & MPa
Adjustable Pointers (AD)
Z
Pointers
Max. Hand Assembly (MX)
NOTE: Not all options are available on all products, please consult factory

69

Reference
MARSH BELLOFRAM TERMS & CONDITIONS

I. GENERAL
A. Customer purchase orders are binding only after written acceptance by Marsh Bellofram. Verbal orders shall not be accepted as binding until confirmed in writing by
Marsh Bellofram.
B. Prices are effective from date of publication and are subject to change without notice.
C. Marsh Bellofram reserves the right, without prior notice to:
1. Change and/or revoke any price.
2. Change and /or revoke any provisions contained herein.
3. Discontinue shipments to any customers.
4. Resolve any inconsistencies, conflicts or ambiguities.
D. Special production runs or product orders are subject to Marsh Bellofram requirements such as, but not limited to, minimum quantities and extended delivery times.
On special production run products Marsh Bellofram reserves the right to over ship or under ship the purchase order quantity by up to 5% and invoice accordingly. Special
orders are subject to cancellation charges.
E. Minimum billing: $60 net per order.
II. PAYMENT TERMS
A. For customer with established credit terms: Net 30 days from shipment date.
B. If credit is not established, payment plus estimated (By Marsh Bellofram) freight charges shall accompany order or arrangements shall be made for collect on delivery
(C.O.D.)
C. Marsh Bellofram reserves the right to revoke any credit extended to a customer if the customer fails to pay for any shipments when due. If in Marsh Belloframs opinion there is a material adverse chance in customers financial condition, Marsh Bellofram shall have the right to suspend further shipments until receipt of adequate assurance of customers ability to pay therefor.
D. All shipments are F.O.B. Plant of Manufacture.
E. The shipment is deemed accepted in good condition by the common carrier and title and all risk of loss or damage is transferred to customer upon that acceptance by
the carrier. The customer is responsible for inspection the merchandise upon receipt. The customer shall insist that visible damage be noted on its copy of the freight
bill. If the product has been lost or damaged in transit, the customer must file the claim with the carrier, as Marsh Bellofram bears no responsibility for any such loss or
damage.
F. All freight, handling and insurance charges shall be invoiced to the customer or shipped freight collect.
G. All shipments are made by carriers of Marsh Belloframs choice. Any special arrangements requested by customer shall be at customers additional expense.
H. Any quantity shortages, incorrect items, or billing errors shall be reported in writing to Marsh Bellofram within 15 days of delivery. Sales order and invoice numbers are
to be furnished on all claims.
I. Marsh Bellofram reserves the right to make delivery in installments. All such installments shall be separately invoiced and paid for when due, without regard to subsequent deliveries. Delay in delivery of any installment shall not relieve customer of his obligation to accept remaining deliveries.
J. Marsh Bellofram shall not be liable for failure to deliver or delay in delivery occasioned by causes beyond Marsh Belloframs control, including without limitation, lockouts, fires, embargoes, war or other breakouts of hostilities, act of inability to obtain shipping space, machinery breakdowns, delays of suppliers, and domestic or foreign governmental acts or regulations. In the event of any delay in delivery due to such causes, unless otherwise agreed, time of delivery shall be deemed extended for
a period of sixty (60) days. Customer shall extend the letter of credit if payment is to be made by letter of credit. If delivery is not made within such extended sixty
(60) day period, contract shall be deemed cancelled without liability to either party.
III. CANCELED ORDERS
ORDER CANCELLATIONS CAN ONLY BE ACCEPTED BY WRITTEN REQUEST via FAX or MAIL.
All order cancellations result in a cancellation fee of at least 25% of the appropriate invoice of the finished item. Additional cancellation fees are:
1. Catalog Stock Items
- If cancelled less than 1 week before ship date, 25% cancellation fee.
2. Catalog Non-Stock Items
- If cancelled less than 30 days before ship date, full price.
3. Customer Specials
- If cancelled at any time, full price.
IV. LIMITED WARRANTY
A. All Marsh Bellofram products are warranted against defects in workmanship materials under normal use for 1 year after date of purchase from Marsh Bellofram unless
otherwise stated. (Proof of purchase is required). Any product which is determined by Marsh Bellofram to be defective in material or workmanship and returned to Marsh
Bellofram, shipping costs prepaid, shall be, as the sole remedy, repaired or replaced at Marsh Belloframs option.
B. This warranty is expressly in lieu of all other warranties expressed or implied, including the warranties of merchantability and fitness for use and all other obligations or
liabilities on the part of Marsh Bellofram, and Marsh Bellofram neither assumes nor authorizes any other person to assume for it, and other liability in connection with
the sale hereunder. Marsh Bellofram disclaims any liability for product defects that are due to product misuse, improper product selection or misapplication.
C. Marsh Bellofram shall not be liable for customers costs, lost profits, good will or other special or consequential damages Marsh Belloframs liability in all events is limited and shall not exceed, the value of merchandise involved.
D. Remedies - Any controversy or claim arising out of or relating to the contract, or the breach thereof, shall be settled by arbitration in Hancock County, State of West
Virginia in accordance with the commercial arbitration Rule of the American Arbitration Association, and judgement on the award render by the arbitrator(s) may be
entered in a court having jurisdiction thereof.
V. MODIFICATION OF TERMS
This contract constitutes the entire agreement between the parties, all private representations and understanding having been merged herein. It may not be modified or terminated except in writing signed by a duly authorized representative of Marsh Bellofram. This contract shall be governed by and construed according to the laws of the
State of West Virginia.

70

Reference
DISTRIBUTOR RETURN POLICY FOR PRESSURE GAUGES & ACCESSORIES

I. RETURN GOODS AUTHORIZATION (RGA)

A. Merchandise returned to Marsh Bellofram for any reason must have a Marsh Bellofram Returned Goods Authorization (RGA) number. Warranty returns also require
proof of purchase (invoice number, date, and an RGA number).
B. An RGA is valid for 45 days from issuance and merchandise must arrive at Marsh Bellofram within that validity period.
C. All material must be shipped freight prepaid.
D. The RGA number must be clearly visible on the outside of the package. A packing list must be included which clearly shows the RGA number, quantity, product
description and reason for return.
E. No returns will be accepted without an authorized RGA (Return Goods Authorization)
II. MARSH BELLOFRAM CANNOT BE HELD RESPONSIBLE FOR ANY MERCHANDISE RETURNED WITHOUT AN RGA NUMBER.
A. An RGA number is issued in good faith based upon customers representation of the merchandise quantity, condition, age and reason for return. All returned material
is subject to inspection by Marsh Bellofram. If the material is found to be other than that originally represented, the shipment will be returned at the customers
expense.
B. An RGA may be requested by mail, fax or by telephoning Marsh Bellofram at 304-387-1200.
1. Warranty Returns (see Warranty Policy): Limited in-warranty merchandise must have an RGA number and be returned freight prepaid. The merchandise will be
repaired or replaced under Marsh Belloframs warranty terms, it will be returned freight prepaid to the customer.
2. Incorrect Shipments: For short shipments or incorrectly supplied merchandise, discrepancies must be reported within 15 days of receipt. For short shipments, a
debit memo should be issued to Marsh Bellofram. Marsh Bellofram will then issue a credit memo, ship the missing merchandise freight prepaid and issue an invoice.
For incorrectly supplied merchandise, all returns require an RGA number and must be returned freight prepaid. A debit memo should be issued to Marsh Bellofram
for the freight. If a replacement is required, Marsh Bellofram will ship freight prepaid and invoice for the new product plus freight.
3. General Terms for Returns (Exchange or Credit): Material requested to be returned will be considered if the following conditions are met:
a. Merchandise is unused, current standard catalog stock of latest design, with both product and packaging in saleable condition.
b. Merchandise shall have been purchased directly from Marsh Bellofram in the last 12 months.
c. Merchandise shall not have been purchased on a product promotion or other special pricing.
4. Marsh Bellofram reserves the right to reject any return request. If accepted, the return will be under the terms specified herein.
The following products are not returnable:
a. Annual Merchandise Exchange Policy for Marsh Bellofram Distributors: Marsh Bellofram will normally accept one stock exchange in a 12 month period, for the
purpose of increasing the flexibility of distributors stock This annual exchange is limited to distributors who are in good standing and whose accounts are
current. The merchandise is subject to the product restrictions listed previously and limited to no more than 2% of the net invoiced sales from Marsh Bellofram
to the distributor location during the previous 12 months. The value of the exchange will be determined by the current list price and current maximum
published discount.
An offsetting order equal to the return is required.
1. The distributor shall issue a written request for an RGA number for the annual exchange showing quantity, product catalog number and description.
2. The exchange is subject to Marsh Bellofram approval and may be subject to an on-site inspection by Marsh Bellofram personnel.
Please allow minimum 2 weeks for approval. Non-stock product or custom product is not returnable.
3. Upon approval of the exchange, Marsh Bellofram will inform the distributor of the net amount of the exchange for the scheduled date for return.
The RGA number will be issued only upon receipt of a purchase order for an equal (net) value, calculated on current list price, current maximum published discount.
4. Upon receipt of RGA number, the distributor shall then package the authorized material and return freight prepaid to Marsh Bellofram, Newell, WV.
The distributors bears liability for lost shipments or shipping damage.
5. All merchandise is subject to inspection upon receipt. Merchandise which is found to be damaged, modified, or in any other way ineligible for exchange,
will be returned at the customers expense and the value will be deducted from the exchange. A credit memo will then be issued for the net value of the
exchange.
6. The replacement order will be shipped and invoiced against the new purchase order with freight at distributors expense.
b. Merchandise Returns for Credit: Merchandise returned for credit requires an RGA number, and is subject to a 25% restocking charge and must be returned
freight prepaid. The amount of the credit will be determined as follows:
1. Items returned within 90 days of purchase and with proof of purchase (copy of invoice) will be at invoiced price less applicable charges.
2. All other will be calculated at current list price and current maximum published discount less 25% restocking fee.
3. In addition to the standard restocking fee, gauges with accessories will be subject to a removal charge equal to the difference between the installed and
sold separately prices.
4. Solid fill thermometry products are non-returnable.
c. Credit Memos:
1. Where required, Marsh Bellofram will issue a credit memo for the returned or exchanged merchandise less any applicable restocking or removal charges.
2. The credit memo will be issued only after receipt and inspection of merchandise.
3. Deduction from payments shall not be made until the Marsh Bellofram issued credit memo has been received.

PRODUCT CLASSES AND OPTIONS

A.
B.
C.
E.

Stock items: Shipped in 7 days or less, with no minimum quantity. (Large quantities may require extended lead times.)
Non-stock items: Consult factory for quantities and lead times.
Custom options on stock items: Dials, rings, windows, restrictors, and cosmetic changes - 4 weeks.
Customer special class: Special connections and materials consult factory for quantities and lead times.

71

Reference
PRODUCT WARNINGS, CLAIMS, RECOMMENDATIONS AND NOTICES

WARNING: A failure resulting in injury or damage may be caused by pressure beyond top of scale, excessive vibration or pressure pulsation, excessive instrument temperature,
corrosion of the pressure containing parts, or other misuse. For correct use and application of pressure gauges, refer to ASME standard B40.1 1998, entitled Gauges: Pressure
Indicating Type: Elastic Element. This document is available from The American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York,
NY 10007.

WARNING: LIQUID FILL: Glycerine or Silicone when combined with strong oxidizing agents, including but not limited to chlorine, nitric acid, and hydrogen peroxide, can result in
a spontaneous chemical reaction, ignition, or explosion which can cause property damage and personal injury. If gauges are to be used in such service, do not use glycerine or
silicone fill. Consult factory for proper fill medium.

IMPORTANT NOTICE: Our recommendations, if any, for the use of these products are believed to be reliable. The greatest care is exercised in the selection of our raw materials and in our manufacturing operations. However, since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, express or implied, is made
to such use or effects incidental to such use, handling or possession or the results to be obtained whether in accordance with the directions claimed so to be. The manufacturer expressly disclaims responsibility therefor. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws
and/or patents covering any material or use.
LIMITED WARRANTY:

(1) All Marsh Instruments products are warranted against defects in workmanship or materials under normal use for one year after date of purchase from Marsh Instruments
unless otherwise stated. (Proof of purchase is required). Any product which is determined by Marsh Instruments to be defective in material or workmanship and is returned to
Marsh Instruments with shipping costs prepaid, shall be, as the sole remedy, repaired or replaced at Marsh Instruments option.
(2) THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF MARSH INSTRUMENTS, AND MARSH INSTRUMENTS NEITHER ASSUMES NOR
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE HEREUNDER. MARSH INSTRUMENTS DISCLAIMS
ANY LIABILITY FOR PRODUCT DEFECTS THAT ARE DUE TO PRODUCT MISUSE, IMPROPER PRODUCT SELECTION OR MISAPPLICATION.
(3) Marsh Instruments shall not be liable for customers costs, lost profits, good will or other special or consequential damages incurred in any way. Marsh Instruments liability in all events is limited to, and shall not exceed, the value of merchandise involved.
NOTE: ALL MARSH INSTRUMENT PRODUCTS ARE SUBJECT TO CONTINUOUS IMPROVEMENT. THEREFORE, MATERIAL AND SPECIFICATIONS ARE SUBJECT TO CHANGE
WITHOUT NOTICE.

72

LT0375 10M 8/2011 CW

MARSH BELLOFRAM
8019 Ohio River Blvd.
State Route 2, Box 305
Newell, WV 26050

(304) 387-1200
FAX (304) 387-4417
e-mail:
[email protected]

SALES
& APPLICATION
800-727-5646

2012