APPLICATION

The BM-B pump, because of is constructional characteri-

stics, may be used in single line-, dual line-, progressive-
and spray lubricating systems.
Regardless of the number of lubrication points, the pump
can be effectively adapted to meet any requirements. It
canalsobeusedfor refillingandmobilegreasingsystems.
PRODUCT CHARACTERISTICS
l
Discharge pressure adjustable up to max. 400 bar
l
High reliability due to forced control
l
Discharge: 2and4liters/h, depends ondrivingspeed
l
Geared motors
l
Long service life thanks to the use of wear-resistant
high-grade steel
l
Compact and rugged design
l
Lubricant: oil, grease, liquid grease
l
Surface signal grey RAL 7004
FUNCTION
The pump can be supplied complete with a geared motor. It consists essentially of a housing with pump unit and
an integral lubricant reservoir.
The delivery and control plungers of the pump element are driven by eccentric cams to which they are rigidly connected.
As a result there of, they are positively controlled.
Ablockage (as may happen with spring-controlledplungers or a hydraulic pressuretransfer) is not possible. The required
delivery pressurecan beadjustedby means of an integraltedpressurerelief valve. It prevents damages tothepumpinthe
event of an inadmissibly high counter-pressure situations. The pump need not be vented.
Product description
Pump BM-B
P_2005_1_GB_BMB / replacement for 22113 P1e / 6 0703HF
A. PUMP TYPE Code
BMB
B. NUMBER OF OUTLETS Code
1 outlet 01
C. REVISION Code
Status A A
D. KINDS OF DRIVE Code
Flange-mounted geared motor 220 - 240 / 380 - 415 / 50 Hz, 0.18 kW, 63 min
-1
01
Flange-mounted geared motor 220 - 240 / 380 - 415 / 50 Hz, 0.37 kW, 63 min
-1
02
Flange-mounted geared motor 220 - 240 / 380 - 415 / 50 Hz, 0.37 kW, 125 min
-1
03
Flange-mounted geared motor UL / 3 / PE 115 V / 60 Hz, 0.21 kW, 63 min
-1
21
Flange-mounted geared motor UL / 3 / PE 115 V / 60 Hz, 0.37 kW, 63 min
-1
22
Flange-mounted geared motor UL / 3 / PE 115 V / 60 Hz, 0.37 kW, 125 min
-1
23
Design
Dimensions (mm)
A B C D
Reservoir
8 l 190 595 785
15 l 240 630 870
30 l 310 700 1010
Motor power
0.18 kW for 63 min
-1
406
0.37 kW for 63 min
-1
432
0.37 kW for 125 min
-1
424
2
E. POSITION OF DRIVE Code
without O
F. RESERVOIR Code
8 liters A
15 liters B
30 liters C
G. ACCESSORIES Code
without 00
Level switch 01
A level switch is available for the indication of the filling level in the reservoir. As sensor serves an
ultrasonic sensor. As soon as the min. or max. level allowed has been obtained, a signal is released.
With the help of a signal lamp at the reservoir, this signal can be used for the visual warning or for the
control of an automatic filling facility.
In case of receiving the order, we will attach particular operating instructions to the level switch with the
following code: BA_2005_1_GB_76951_6011.
Pressure gauge 02
Level switch and pressure gauge 03
EXAMPLE OF ORDER
3
Code
B M B 0 1 A 0 1 O A 0 1
Pump type BM-B Code: BMB
Number of outlet
1 outlet
Code: 01
Revision
Status A
Code: A
Kinds of drive
Flange-mounted geared motor 220-240/380-415/50Hz
0.18kW, 63 min
-1
Code: 01
Position of drive
without
Code: O
Reservoir capacity
8 liters
Code: A
Accessories
Level switch for reservor 8 liter
Code: 01
SPECIFICATION
Discharge pressure adjustable up to max. : _______________________________________________________ 400 bar
Discharge volume at : _____ 63 min
-1
: _______________________________________________ 34 cm
3
/min ( 2.0 l/h )
____________________ 125 min
-1
: _______________________________________________ 67 cm
3
/min ( 4.0 l/h )
Max. rpm geared motor version : _______________________________________________________________ 125 min
-1
Direction of rotation of the pump : ___________________________________________________________ anticlockwise
Reservoir capacity : ________________________________________________________________________ 8, 15 or 30 l
Operating temperature according to type : _____________________________________________ - 20 C up to + 80 C
Compatible lubricants : _____________________________________________________ up to NLGI-class 3 DIN 51818
Mineral oils ______________________________________________________________ ISO VG 68 to 1500 (DIN 51519)
Built-in grease filter _________________________________________________________ wire cloth 0,4 x 0,18 DIN 4189
Built-in pressure relief valve : _______________________________ can be adjustable from 0 to 450 bar, set to 400 bar
When using the hydraulic 4/2-way valve SA-K, the set pressure may not exceed 350 bar.
DELIMON
Headquarter
Arminstrae 15
D-40227 Dsseldorf
PO Box 10 20 52
D-40011 Dsseldorf
Phone: +49 211 7774 0
Fax: +49 211 7774 210
[email protected]
www.delimon.de
DELIMON
Office & Plant Beierfeld
Am Bockwald 4
D-08344 Grnhain-Beierfeld
DELIMON
Office Austria
Am Spitz 2-3 / Schlohofer Str. 4-6
Stiege 4, Top 20
A-1210 Vienna
Phone: +43 1 585 66 17
Fax: +43 1 585 66 17 50
[email protected]
www.delimon.at
LUBRIMONSA
Spain
Avda. Txori-Erri 38
48150 Sondica - (Vizcaya)
Telfono: +34 94 453 20 00
Fax: +34 94 453 25 00
[email protected]
DELIMON-Denco Lubrication
DELIMON-Cooling
United Kingdom
Ramsden Court, Ramsden Road
Rotherwas Industrial Estate
Hereford, HR2 6LR
Phone: +44 (0) 1432 365 000
Fax: +44 (0) 1432 365 001
[email protected]
www.delimon.co.uk
BIJUR Products, Inc.
France
BP 50
ZI de Courtabuf
5, Avenue de I'Atlantique
91942 Les Ulis Cedex
Tl.: +33 1 692 985 85
Fax: +33 1 690 776 27
[email protected]
Fr reibungslose Bewegung
For smooth motion
4