Scribd
Upload
791 views3 pages

MCS2

This document is a type approval certificate issued by Det Norske Veritas (DNV) to DEIF A/S for their MCS-2 and MCS-3 generator controllers. The certificate approves the controllers for compliance with DNV's rules for classification of high speed and light craft. It provides details on the product description, approval conditions, type approval documentation and tests carried out. Periodical assessment is required at least every two years to ensure continued compliance with the type approval.

Uploaded by

ABOUDH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
791 views3 pages

MCS2

This document is a type approval certificate issued by Det Norske Veritas (DNV) to DEIF A/S for their MCS-2 and MCS-3 generator controllers. The certificate approves the controllers for compliance with DNV's rules for classification of high speed and light craft. It provides details on the product description, approval conditions, type approval documentation and tests carried out. Periodical assessment is required at least every two years to ensure continued compliance with the type approval.

Uploaded by

ABOUDH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Hvik, Norway, Tel.: +47 67 57 99 00, Org.No.

NO 945 748 931 MVA. www.dnv.com


Form No.: TA 1411a Issue: 2013-10 Page 1 of 3




DET NORSKE VERITAS
TYPE APPROVAL CERTIFICATE


CERTIFICATE NO. A-13814

This is to certify that the
General Controller

with type designation(s)
MCS-2/MCS-3 Generator controller and protection

Issued to
DEIF A/S
SKIVE, Denmark

is found to comply with
Det Norske Veritas' Rules for Classification of High Speed & Light Craft


Application
Location classes:


Temperature B
Humidity B
Vibration A
EMC B
Enclosure Required protection according to the Rules
to be provided upon installation on board













This Certificate is valid until 2016-06-30.

Issued at Hvik on 2014-06-10

for Det Norske Veritas AS

Odd Magne Nesvg

DNV local station: Aalborg

Approval Engineer: Poul Tranborg
Head of Section

This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid.
The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.
If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such
person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum
compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers,
employees, agents and any other acting on behalf of Det Norske Veritas.

Certificate No.: A-13814
File No.: 894.80
Job Id.: 262.1-005435-6




DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Hvik, Norway, Tel.: +47 67 57 99 00, Org.No. NO 945 748 931 MVA. www.dnv.com
Form No.: TA 1411a Issue: 2013-10 Page 2 of 3


Product description
MCS-2 and MCS-3 are customer specific (Caterpillar) products with additional M4 controller board for engine monitoring and
protection included in the generator protection unit module GPU, ref. separate Type Approval Certificates A-13552 for GPU and
A-13553 for GPU-3.

The software is indentified by the following versions:

MCS-2 MCS-3
Application SW 2.44.X 3.0X.X
M4 board SW 2.0X.X 2.0X.X

Approval conditions
The Type Approval covers hardware and software listed under Product description.

When the type approved software is revised to an extent affecting DNVs Rules a notification and access to an updated software
version history is to be given. For major changes a new functional type test may be required and the certificate may have to be
renewed to identify the new software version.

The documentation to be submitted for approval in each case is to cover the M4 option and otherwise as stated in the Type
Approval Certificate for the GPU/GPU-3, i.e.:
- Reference to this Type Approval Certificate
- System block diagram
- Power supply arrangement (may be part of the System block diagram)
- Functional description including unit option information
- Test program for commissioning test

As long as the delivered system is covered by the Type Approval, a product certificate according to Pt.4 Ch.9 Sec.1 A 202 is not
required. Correct configuration and set up for each delivery to be tested during commissioning after installation onboard.

Type Approval documentation
Tests carried out
Applicable tests according to Standard for Certification No. 2.4, April 2006.


Certificate No.: A-13814
File No.: 894.80
Job Id.: 262.1-005435-6




DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Hvik, Norway, Tel.: +47 67 57 99 00, Org.No. NO 945 748 931 MVA. www.dnv.com
Form No.: TA 1411a Issue: 2013-10 Page 3 of 3

Periodical assessment
The scope of the periodical assessment is to verify that the conditions stipulated for the type are complied with, and that no
alterations are made to the product design or choice of systems, software versions, components and/or materials.
The main elements of the assessment are:
Ensure that type approved documentation is available
Inspection of factory samples, selected at random from the production line (where practicable)
Review of production and inspection routines, including test records from product sample tests and control routines
Ensuring that systems, software versions, components and/or materials used comply with type approved documents and/or
referenced system, software, component and material specifications
Review of possible changes in design of systems, software versions, components, materials and/or performance, and make
sure that such changes do not affect the type approval given
Ensuring traceability between manufacturers product type marking and the type approval certificate
Periodical assessment is to be performed at least every second year and at renewal of this certificate.

END OF CERTIFICATE

You might also like