Scribd
Upload
386 views

Practice Assignment

1. The document describes several exercises related to a basic computer's instruction cycle, memory contents, and register values. 2. It provides solutions showing the content of registers like PC, AR, DR, AC, and IR at different steps of the instruction cycle. 3. One exercise asks what value a register called E will hold when an instruction at a specific memory address is fetched, and the solution shows the sequence of instructions that will lead to E having a value of 1.

Uploaded by

shriya2413
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
386 views

Practice Assignment

1. The document describes several exercises related to a basic computer's instruction cycle, memory contents, and register values. 2. It provides solutions showing the content of registers like PC, AR, DR, AC, and IR at different steps of the instruction cycle. 3. One exercise asks what value a register called E will hold when an instruction at a specific memory address is fetched, and the solution shows the sequence of instructions that will lead to E having a value of 1.

Uploaded by

shriya2413
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

1

Dr. Cherif Salama


Faculty of Media Engineering
and Technology


CSEN 402 Computer Organization and System Programming
Practice Assignment 5
Spring 2014

NOT to be submitted
To be discussed during tutorial sessions


Exercise 1:

An instruction at address 021 in the basic computer has I=0, an operation code of the
AND instruction and an address part equals to 083. The memory word at address 083
contains the operand B8F2 and the content of AC is A937. Go over the instruction cycle
and determine the content of the following registers at the end of the execute phase: PC,
AR, DR, AC and IR. Repeat the problem six more times staring with an operation code
of another memory-reference instruction. (All numbers are in hexadecimal).


Solution:
Instruction PC AR DR AC IR
Initial 021 - - A937 -
AND 022 083 B8F2 A832 0083
ADD 022 083 B8F2 6229 1083
LDA 022 083 B8F2 B8F2 2083
STA 022 083 - A937 3083
BUN 083 083 - A937 4083
BSA 084 084 - A937 5083
ISZ 022 083 B8F3 A937 6083


Exercise 2:

Show the content in hexadecimal of registers PC, AR, DR, IR, and SC of the basic
computer when an ISZ indirect instruction is fetched from memory and executed. The
initial content of PC is 7FF. the content of memory at address 7FF is EA9f. The content
of memory at address A9F is 0C35. The content of memory C35 is FFFF. Give the
answer in a table with five columns, one for each register and a row for each timing
signal. Show the contents of the registers after the positive transition of each clock pulse.


2

Solution:
Timing signals PC AR DR IR SC
Initial 7FF - - - 0
T
0
7FF 7FF - - 1
T
1
800 7FF - EA9F 2
T
2
800 A9F - EA9F 3
T
3
800 C35 - EA9F 4
T
4
800 C35 FFFF EA9F 5
T
5
800 C35 0000 EA9F 6
T
6
801 C35 0000 EA9F 0

Exercise 3:

Consider the basic computer with the following hexadecimal content of a few memory
words with the given hexadecimal addresses:

Address 020 021 022 023 024 025
Content 7400 7100 7020 7004 4021 xxxx

If initially PC holds the hexadecimal value (020)
H
, and AC holds the hexadecimal value
(FFFD)
H
, then by the time the instruction at memory address (025)
H
is fetched, what will
be the value that is stored in E?

Solution:

The sequence of instructions is as follows:

address Instruction 1
st
iteration 2
nd
iteration 3
rd
iteration
020 CLE E=0
021 CME E=1 E=0 E=1
022 INC AC AC=FFFE AC=FFFF AC=0000
023 SZA PC=024 PC=024 PC=025
024 BUN, 021 PC=021 PC=021
025 xxxx Fetched

Then E will be equal to 1 by the time the instruction at address (025)
H
is fetched.
3

Exercise 4:

A computer uses a memory of 65,536 words with eight bits in each word. It has the
following registers: PC, AR, TR (16 bits each), and AC, DR, IR (eight bits each).
A memory-reference instruction consists of three words: an 8-bit operation code (one
word) and a 16-bit address (in the next two words). All operands are eight bits. There is
no indirect bit.
a. Draw a block diagram of the compter showing the memory and registers as in Fig.
5-3. (Do not draw the common bus).
b. Draw a diagram showing the placement in memory of a typical three-word
instruction and the corresponding 8-bit operand.
c. List the sequence of microoperations for fetching a memory reference instruction
and then placing the operand in DR. Start from timing signal T
0
.

Solution:
a.

b.

c. T
0
: AR PC
T
1
: IR M[AR], PC PC+1
T
2
: AR PC
T
3
: TR(0-7) M[AR] , PC PC+1
T
4
: AR PC
T
5
: TR(8-15) M[AR] , PC PC+1
T
6
: AR TR
T
7
: DR M[AR]
4

Exercise 5:

A digital computer has a memory unit with a capacity of 16,384 words, 40 bits per word.
The instruction code format consists of six bits for the operation part and 14 bits for the
address part (no indirect mode bit). Two instructions are packed in one memory word,
and a 40-bit instruction register IR is available in the control unit. Formulate a procedure
for fetching and executing instructions for this computer.

Solution:




1. Read 40-bit double instruction from memory to IR and then increment PC
2. Decode opcode1
3. Execute instruction1 using address1
4. Decode opcode2
5. Execute instruction2 using address2
6. Go back to step1

You might also like