Scribd
Upload
84 views

Technical Topic

Bluetooth technology is a short-range wireless communication standard that replaces wired connections between devices while maintaining security. It allows up to eight devices to connect in a piconet within a range of up to 100 meters. Bluetooth uses adaptive frequency hopping to reduce interference on the 2.4GHz spectrum and can simultaneously transmit both data and voice.

Uploaded by

s.reegan
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
84 views

Technical Topic

Bluetooth technology is a short-range wireless communication standard that replaces wired connections between devices while maintaining security. It allows up to eight devices to connect in a piconet within a range of up to 100 meters. Bluetooth uses adaptive frequency hopping to reduce interference on the 2.4GHz spectrum and can simultaneously transmit both data and voice.

Uploaded by

s.reegan
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Co

Bluetooth technology
nte
Basics nts
•C
Bluetooth wireless technology is a short-range
communications technology intended to replace
the cables connecting portable and/or fixed •S
devices while maintaining high levels of security.
The key features of Bluetooth technology are •S
robustness, low power, and low cost.
The Bluetooth specification defines a uniform
•I
structure for a wide range of devices to connect
and communicate with each other.
•R
Bluetooth technology has achieved global
acceptance such that any Bluetooth enabled
device, almost everywhere in the world, can •P

connect to other Bluetooth enabled devices in


proximity. Bluetoothenabled electronic devices •D
connect and communicate wirelessly through
short-range, ad hoc networks known as piconets.
Each device can simultaneously communicate with up to seven other
devices within a single piconet. Each device can also belong to
several piconets simultaneously. Piconets are established dynamically
and automatically as Bluetooth enabled devices enter and leave radio
proximity.
A fundamental Bluetooth wireless technology strength is the ability to
simultaneously handle both data and voice transmissions. This
enables users to enjoy variety of innovative solutions such as a hands-
free headset for voice calls, printing and fax capabilities, and
synchronizing PDA, laptop, and mobile phone applications to name a
few.
Bluetooth Core Specification
• Version 3.0 + High Speed (HS), adopted April 2009
• Version 2.1 + Enhanced Data Rate (EDR), adopted July, 2007
Specification Make-Up
Unlike many other wireless standards, the Bluetooth wireless
specification gives product developers both link layer and application
layer definitions, which supports data and voice applications.
Spectrum
Bluetooth technology operates in the unlicensed industrial, scientific
and medical (ISM) band at 2.4 to 2.485 GHz, using a spread
spectrum, frequency hopping, full-duplex signal at a nominal rate of
1600 hops/sec. The 2.4 GHz ISM band is available and unlicensed in
most countries.
Interference
Bluetooth technology’s adaptive frequency hopping (AFH) capability
was designed to reduce interference between wireless technologies
sharing the 2.4 GHz spectrum. AFH works within the spectrum to
take advantage of the available frequency. This is done by detecting
other devices in the spectrum and avoiding the frequencies they are
using. This adaptive hopping allows for more efficient transmission
within the spectrum, providing users with greater performance even if
using other technologies along with Bluetooth technology. The signal
hops among 79 frequencies at 1 MHz intervals to give a high degree
of interference immunity.
Range
The operating range depends on the device class:
• Class 3 radios – have a range of up to 1 meter or 3 feet
• Class 2 radios – most commonly found in mobile devices – have a
range of 10 meters or 33 feet
• Class 1 radios – used primarily in industrial use cases – have a
range of 100 meters or 300 feet
Power
The most commonly used radio is Class 2 and uses 2.5 mW of
power. Bluetooth technology is designed to have very low power
consumption. This is reinforced in the specification by allowing
radios to be powered down when inactive. The Generic Alternate
MAC/PHY in Version 3.0 + HS enables the discovery of remote
AMPs for high speed devices and turns on the radio only when
needed for data transfer giving a power optimization benefit as well as
aiding in the security of the radios.
Data Rate
1 Mbps for Version 1.2; Up to 3 Mbps supported for Version 2.0 +
EDR
Up to 24 Mbps supported for Version 3.0 + HS

You might also like