0% found this document useful (0 votes)
144 views12 pages

VW MKIV Brake Fluid Flush DIY PDF

This document is a DIY guide for flushing the brake fluid on a MK4 Volkswagen. It consists of 23 steps to completely flush the brake lines and replace the old fluid with new fluid. The guide emphasizes the importance of changing brake fluid regularly to prevent issues from moisture contamination. It provides tips for bleeding each brake line individually and cycling the ABS pump at the end to clear any remaining old fluid.

Uploaded by

castillo61
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
144 views12 pages

VW MKIV Brake Fluid Flush DIY PDF

This document is a DIY guide for flushing the brake fluid on a MK4 Volkswagen. It consists of 23 steps to completely flush the brake lines and replace the old fluid with new fluid. The guide emphasizes the importance of changing brake fluid regularly to prevent issues from moisture contamination. It provides tips for bleeding each brake line individually and cycling the ABS pump at the end to clear any remaining old fluid.

Uploaded by

castillo61
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

My Profile | Active Users | Help | Search | Google Search

You are not logged in, Log in | Register


VWvortex Forums Brakes DIY:Brake Flush MK4

Steveo989
Member



Offline

Member Since
1-21-2006
583 posts

Virgina Beach
VA
2003 VW GOLF
2.0L, 1984 gti,
1989 audi 200
turbo

DIY:Brake Flush MK4 12:27 AM 4-15-2007

Quick and to the point, the reason to change your brake fluid is to save your ass! Brake fluid is a hydroscopic which means it attracts water, big deal right? Wrong,
through the brake lines and through your resevoir brake fluid attracts water, water has a really low boiling point, the more water in your lines the lower your boiling
point. So you smash the brake pedal to stop you from slaming into the car ahead of you but your brakes barely keep you from hitting him. Your pedal feel may be
very "mushy" as some may say. Your pads and rotors are fine so what's the deal. When you slammed your brakes their is a good chance your brake fluid boiled, in
turn becoming a gas. Which we all know you can compress gas a lot! So your pedal sinks to the floor.
Of course that is worst case scenerio but that is the situation that we are trying to avoid by changing our fluid.
Another reason is with our expensive ABS ESP etc. etc. we want to prolong their life as long as we possibly can, new brake fluid will keep corrosion to an absolute
minimum.
Bentley Recommends changing your fluid every two years regardless of mileage. Which is a pretty safe bet, however those of us that drive our
asses off may want a bit more insurance, my recommendation is every 30,000 miles or 1 1/2 years. Whichever comes first. Mainly for the fact that
in 2 years the fluid has already taken on too much water and is already doing too much damage.

Tools Required: Jack Jackstands, 11mm open ended wrench(9mm wrench for 6spd slave cylinder bleed) Motive power bleeder or equivalent, catch bottles or tubing
to collect old fluid, turkey baster to remove old fluid from resevior.
Start with the simple part:
1.Begin loosening up your lugs on your wheels.
2.Jack up your vehicle and support it with jackstands.
3. Remove your wheels. This will let you have plenty of room to work and the front calipers it is nearly impossible to bleed without removing the wheels.
4.Due to variances in 1.8t, tdi, 2.0l, VR6, 3.2l. Remove whatever you need to to have good access to the front of the the brake fluid resevoir.
5. Now remove the yellow fluid level sensor from the brake fluid resevoir.
6. Next take out the plastic screen insert inside the resvoir with a flat head screwdriver as pictured.
Page 1 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602

7.Take the time to remove any obvious dirt from the plastic screen or the sensor.
8. Begin removing the old fluid from the resevoir as pictured.
Page 2 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602

9.With a very clean paper towl or other item remove obvious dirt from inside the resevoir.
10. Fill the resevoir with whatever your choice of fluid is, my friend's choice was ATE SUPER BLUE.
Page 3 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602

11. Now with an EMPTY Power Bleeder test the seal on the resevoir. This will save you the nightmare if their was an insufficent seal on the resevoir.

Page 4 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602
12.Now you can fill your power bleeder with the remainder of whatever fluid you have choosen.

13. Pressurize the system to 10-13psi. The older the resevoir the less pressure you want to use. This keeps the resevoir from rupturing.(You really only need to
worry about this on old resevoirs I would say 8 years old+
14.Now we begin the fun part of flushing your lines, bleed the clutch first, (5spdMK4 you simply bleed untill you get all new fluid.11mm wrench) (6spd bleed off
about 100cc's of fluid, close the bleeder screw,quickly pump the clutch pedal 15 times, then bleed 50cc's of fluid.If I remember correctley this is a 9mm wrench)
15. Anyway crack open the bleed screw for the clutch and bleed as what is said above.
Page 5 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602
5spd

16. Close your bleed screw, and don't touch the clutch untill the rest of the system is flushed. This will keep old fluid from potentially mixing with the new fluid.
Page 6 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602
17. Now open the bleed screw on the right rear caliper. When only new fluid comes out. Their should be no air or corrosion coming out of the line when you close
the bleed screw.


Page 7 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602


Page 8 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602

18.Repeat on the rear left(driver rear)

19. Repeat on the front right(passenger front)
Page 9 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602


Page 10 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602


20.Repeat on front left front(driver front)
Page 11 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602
21. Repeat as necessary I would hit all the brakes twice to get all the old fluid out for sure.
22. Now do the opposite of removing everything and deperessurize the pump.
23. Finally Have a beer and cycle your abs pump, not in that order either

Modified by Steveo989 at 9:32 AM 4-15-2007

Modified by Steveo989 at 9:37 AM 4-15-2007

Modified by Steveo989 at 9:51 AM 4-15-2007

Modified by Steveo989 at 9:56 AM 4-15-2007

Modified by Steveo989 at 9:51 PM 4-20-2007


Letting someone else work on your car is like letting a stranger do your girlfriend.
My BRAKE FLUSH DIY- http://forums.vwvortex.com/zerothread?id=3184085
My SS Brake Line DIY http://forums.vwvortex.com/zerothread?id=3258154

Steveo989
Member



Offline

Member Since
1-21-2006
583 posts

Virgina Beach
VA
2003 VW GOLF
2.0L, 1984 gti,
1989 audi 200
turbo

12:28 AM 4-15-2007

Time for a plug


Modified by Steveo989 at 9:58 AM 4-15-2007


Letting someone else work on your car is like letting a stranger do your girlfriend.
My BRAKE FLUSH DIY- http://forums.vwvortex.com/zerothread?id=3184085
My SS Brake Line DIY http://forums.vwvortex.com/zerothread?id=3258154

Steveo989
Member



Offline

Member Since
1-21-2006
583 posts

Virgina Beach
VA
2003 VW GOLF
2.0L, 1984 gti,
1989 audi 200
turbo

1:00 PM 4-15-2007

Any ?'s, comments concerns feel free to post or pm me. I will make corrections or make things a bit more user friendly.


Letting someone else work on your car is like letting a stranger do your girlfriend.
My BRAKE FLUSH DIY- http://forums.vwvortex.com/zerothread?id=3184085
My SS Brake Line DIY http://forums.vwvortex.com/zerothread?id=3258154

Tim_1.8T
Member



Offline

Member Since
1-19-2006
297 posts

Boynton Beach
FL
2002,
Volkswagen,
GTI 1.8T

Re: (Steveo989) 8:06 PM 4-15-2007

Excellent DIY!
I have one question though, how do you cycle the ABS pump?
Steveo989
Member


8:16 PM 4-15-2007

Page 12 of 30 VWvortex Forums: DIY:Brake Flush MK4
11/3/2008 http://forums.vwvortex.com/zerothread?id=3183602

You might also like