Brochure

Fundamentals Handbook
The Eaton UPS and Power Management
March 2013
2 EATON Eaton UPS and Power Management Fundamentals Handbook
3 EATON Eaton UPS and Power Management Fundamentals Handbook
TABLE OF CONTENTS
Introduction 4
Questions to consider 5
Top UPS design considerations 6
Other UPS design considerations 8
How to size a UPS 9
UPS cost justification worksheet 10
UPS form factors 11
Input plugs and output receptacles 12
UPS startup 14
The difference between VA and watts 15
Decentralized or central UPS? 16
What is three-phase power? 18
Increase server energy efficiencies by using high-voltage power supplies and 208V UPSs 19
Worldwide voltage map 20
Worldwide voltages 21
The nine power problems 22
UPS topologies 23
UPS battery overview 24
Factors affecting battery life 26
UPS software overview 27
Service overview 28
Frequently asked questions 30
Electric transmission distribution system 32
Eaton's Blackout Tracker 34
Overview of 2012 national power outage data 36
Case study example one 38
Case study example two 40
Commonly used acronyms 42
Glossary of power terms 44
4 EATON Eaton UPS and Power Management Fundamentals Handbook
Welcome to the Eaton UPS and Power
Management Fundamentals Handbook.
From plug and receptacle charts and facts
about power problems to an overview of
various UPS topologies and factors affecting
battery life, youll find a wealth of pertinent
resources designed to help you develop the
optimum solution. We have also included
valuable, real-world case studies that
showcase exactly how Eaton

can help you

to develop the best power protection
solution.
This handbook is your one-stop source for
essential information ... whether you need
power protection for small, medium or large
data centers; health care facilities; or other
environments in which ensuring uptime and
safeguarding data are critical.
Why a UPS?
In general, a UPS protects IT equipment and
other electrical loads from problems that
plague our electrical supply, performing the
following three basic functions:
1. Preventing hardware damage typically
caused by surges and spikes. Many UPS
models continually condition incoming
power as well.
2. Preventing data loss and corruption.
Without a UPS, devices that are
subjected to a hard system shutdown
can lose data completely or have it
corrupted. In conjunction with power
management software, a UPS can
facilitate a graceful system shutdown.
3. Providing availability for networks and
other applications while preventing
downtime. In some cases, they provide
enough battery runtime to ride through
brief outages; in other cases, they
provide hours of runtime to ride through
extended power outages. UPSs are also
paired with generators to provide enough
time for them to power up.
Introduction
THERE' S A LOT
TO SEE IN THIS
HANDBOOK.
5 EATON Eaton UPS and Power Management Fundamentals Handbook
When it comes to backup power, here are
some basic questions to ask yourself.
Applications
1. How often do you refresh and maintain
your IT hardware (including servers)?
What about your UPS equipment?
2. If you have a converged data-voice
network, have you protected all critical
switches?
3. If you have virtualized your servers, have
you considered the impact on your UPS
equipment?
4. What would happen if the power went
out at your facility right now?
5. Have you thought about the impact of
damaged or corrupted data?
6. How much energy do your UPS units
consume? How efficient are they?
7. What is the air speed velocity of an
unladen swallow? An African swallow.
UPS-specific
1. What size UPS do you need? (kVA or
amperage)
2. What voltage is currently available at
your site?
3. What voltage do you need?
4. What runtime do you want?
5. Are there any clearances or size
constraints?
6. Do you have bypass requirements?
7. What types of input and output
connections are required?
8. Is there a generator on site?
9. Does the UPS need to be scalable?
10. Do you need redundancy?
Accessories
1. How is power getting from the UPS to
your equipment?
2. Do you have a need for enclosures,
communications, seismic mounting, floor
stands or rail kits?
3. Is a maintenance bypass switch needed?
Software
1. Is there a need to have orderly scheduled
shutdowns?
2. Do you want to remotely monitor the
UPS?
3. Would you like to remotely notify others
of UPS events?
4. How will your UPS software manage
virtual servers during an extended power
outage?
Service
1. Do you need immediate factory
response?
2. What kind of parts and labor coverage do
you need?
3. Do you want any type of preventive
maintenance?
4. Whens the last time you checked the
batteries in your existing UPS units?
Questions to
consider
OUR DATA CENTER
IS A TOTAL ZOO.
GOOD TIMES.
6 EATON Eaton UPS and Power Management Fundamentals Handbook
1. Power environment: single- and three-
phase
Understanding your existing power
infrastructure is a crucial step in the
qualification and sales process. While you
may focus on larger, three-phase power
systems, the majority of IT managers are
dealing primarily with single-phase
equipment, often at the rack level.
Many existing computer rooms and small
to mid-sized data centers have single-phase
loads at the rack level. Ground-up designs
are increasingly moving three-phase power
to the point of utilization to gain efficiencies
and reduce costs, creating great opportunity
for three-phase solutions in new
construction.
2. Installation environment
Its imperative to understand how a
prospective UPS will be deployed. Since
most environments support several different
solutions, you may need to evaluate these
options.
3. Power load
The VA or watt rating of your power loads
is one of the most important factors in
identifying the right UPS. After identifying
the power environment (if the UPS needs
to be single- or three-phase), the size of the
UPS further narrows the selection. In
single-phase deployments especially, it
often makes sense to select a UPS that
exceeds current power requirements but
offers greater runtimes and allows for
future growth.
4. Availability and battery runtime
This is where you need to determine your
true runtime requirements. While runtime
may seem like a simple thing to quantify,
understanding the facts behind the numbers
help contribute to the development of
end-to-end solutions.
Generally, the amount of runtime required
can significantly affect the solution cost,
but many Eaton solutions are actually
more cost-effective in extended runtime
applications.
There are four basic battery runtime
configurations:
1. UPS with 10 to 15 minutes of runtime and
no generator. You are covered for 90 to 95
percent of power outages. You can either
use UPS shutdown clients to save your
data or stay online as long as possible
before the system crashes.
2. UPS with 10 to 15 minutes of runtime and
a generator. You have a very reliable setup
and most generators will startup within
one minute (five minutes maximum). You
are covered for most situations.
3. Redundant UPSs, generator and two
power feeds for dual-corded servers. You
have a lot of money and/or are really
worried about the power failing. It's time
to get a consultative person on-site to
help you figure it out.
4. UPS with two or more hours of battery
runtime. In some cases, generators may
not be practical and you must rely entirely
upon batteries.
Top UPS design
considerations
The following factors outline the key design considerations to take into account when
analyzing your needs.
MY IT PRO SAYS EATON
HELPS HIM TRIM THE
FAT. FRANKLY, I' M A
LITTLE WORRIED.
7 EATON Eaton UPS and Power Management Fundamentals Handbook
5. Scalability
Its always important to consider your future
expansion needs when evaluating solutions.
Eatons scalable UPS solutions provide a
competitive advantage by offering a
cost-effective way to increase capacity.
Virtually all Eaton UPSs with a 6 kVA or
greater power rating offer some form of
scalability, either through a simple firmware
upgrade, the addition of modular hardware
components or the paralleling of multiple
UPSs.
For cost-conscious or budget-constrained
customers, a UPS with inherent scalability
often proves to be the best value in the long
run, allowing you to increase capacity
without purchasing additional hardware. A
simple kVA upgrade is all thats needed to
enable a UPS with inherent scalability to
operate at full capacity.
You may want to service the UPS yourself. If
thats the case, look for a unit that allows
you to add capacity with power and/or
battery modules.
While modular solutionsincluding multiple,
paralleled systemsare often a more
affordable option initially, they can be a more
expensive solution over the long term due to
added hardware and installation costs.
Depending on your needs, a larger,
centralized, non-modular system with
inherent scalability might ultimately be the
most cost-effective solution.
6. Power distribution
It is important for you to consider how
power will be delivered to your critical
equipment. In some cases, you may simply
plug loads directly into the UPS. In others,
you may need large PDUs to distribute
power. You may also incorporate rack-based
power strips or ePDU units into your design.
7. Manageability
While a UPS protects the attached load
during a power outage, power management
software is required to ensure that all
work-in-progress is saved and that sensitive
electronic equipment is gracefully shut
down if the power outage exceeds the
battery runtime of the UPS. Without
software, the UPS simply runs until its
batteries are depleted and then drops the
load. In addition to this basic functionality of
UPS software, you should consider the
following monitoring and manageability
capabilities:
Power event notifications, including
emails, pop-up alerts and text messages
to pre-designated recipients
Logging of power events
Advanced capabilities in virtual
environments, including integration into
VMwares ESXi and vSphere and
Microsofts Hyper-V
Dedicated battery monitoring and
advanced service notifications
Remote monitoring by service personnel
from the UPS manufacturer.
8. Operation and maintenance
While you may value the ability to service
your own equipment, the vast majority of IT
and facility management professionals
prefer the peace of mind that comes with
full factory support through on-site service
or an advanced UPS exchange agreement.
To make an informed decision on service
support, you must accurately assess your
own technical and service capabilities. You
should also look at the various UPS product
designs to gauge how easy it is to swap out
battery and power modules.
9. Budget
Although the latest performance features of
a UPS may fit nicely with what you are
looking for, budget constraints may force
you to make trade-off decisions. Be
prepared to prioritize your needs for
redundancy, scalability, efficiency, software
management, modularity and serviceability.
I LOVE MAKING PLANS.
EVIL ONES!
8 EATON Eaton UPS and Power Management Fundamentals Handbook
The following design guidelines should be
reviewed and followed prior to ordering the
appropriate UPS solution.
1. Check to see if theres an adequate
electrical supply near the UPS.
Compare UPS fuse ratings (amps) and
breaker types and whether any electrical
work may be needed (i.e., cabling to the
UPS terminal block input).
2. Find out the dimensions of the UPS
and include any battery cabinets.
Make sure your installation site has enough
space available.
3. Ensure the UPS can be placed in its
final position.
Will the UPS components fit through doors?
Are there any stairs? Please consult Eatons
website for detailed UPS dimensions and
specifications: powerquality.eaton.com.
4. Verify that the floor is strong enough to
support the UPS and battery cabinets.
The UPS and its battery cabinets can be
heavy, so make sure the site has the proper
floor loading capacity.
5. Confirm that the UPS will have
adequate ventilation.
Eaton UPS models use internal fans to cool
them. You shouldnt install the UPS in a
sealed container or small, sealed room.
6. Always be sure which wall receptacle
is required to plug in the UPS.
Only UPSs with power ratings up to 1500
VA plug into a standard 15-amp wall outlet.
All others require a larger receptacle, which
must be installed by an electrician. Things
go more smoothly if you arent waiting for
this to be done after all of the equipment
has arrived. Most small and rackmounted
computers run on normal 120 volt, 15-amp
electrical service. Some computers have
power cords that require a higher voltage of
208V or 240V, in which case youll need a
3000 VA or larger UPS.
7. Hardwired connections.
Hardwired outputs are generally useful if
you want the UPS output to be distributed
via electrical panels. Using an electrical
distribution panel allows for flexibility with
receptacles types. If theres no other UPS
that fits your receptacle and power require-
ments, you may need to hardwire it.
Hardwired UPS models typically require the
use of a certified electrician to wire them to
the electrical distribution panel, which could
be a more costly option.
8. Installing small UPS models behind
larger UPS models.
If youre installing a smaller UPS behind a
larger UPS, you must consider the total
potential power of the smaller UPS as well
as other loads that will be powered by the
larger UPS. For example, if youre plugging a
1500 VA UPS into a 10,000 VA UPS, you
must consider the load of the smaller UPS
rather than just the load thats plugged into
it. In addition, the larger UPS must be at
least five times larger than the smaller UPS.
This design guideline must be followed due
to charging capacity that may be required by
the smaller UPS; any anomalies associated
with the building power, and to avoid
overheating or potential over loading of the
larger UPS which may result in failure of the
all UPS models in the string.
9. Using a UPS and a generator together.
A UPS provides backup power and actively
conditions and regulates voltage. Similarly,
an auxillary generator provides backup
power, but typically takes 10-15 seconds to
start up, depending on its type. For long-
term backup servers and IT equipment, this
isnt an optimal situation, so during that
downtime the UPS kicks in. Basically, the
UPS bridges the power gap between loss of
power and generator coming online.
When choosing your UPS solution, its
important to keep power ratings in mind;
you cannot size a generator in a 1:1 match
to the UPS and expect successful results.
There are two reasons for this: first, UPSs
arent 100 percent efficient and second,
generators need to account for step loads.
In addition, very small generators dont often
provide enough kinetic energy to provide a
smooth transition. As a rule of thumb, for 20
kVA and above, auxiliary generators should
be sized 1.5 times the size of the output
rating of the UPS in kW, while for 20 kVA
and below, they should be two times larger.
Its also important to note that gas-powered
generators should be sized a bit larger.
10. Building codes.
Verify that the final UPS solution meets local
building codes.
Other UPS design considerations
How to size a UPS
9 EATON Eaton UPS and Power Management Fundamentals Handbook
I CHAT WITH THE INSIDE
SALES TEAM ALL THE
TIME. THEY' RE COOL.
You have decided that you need a UPS.
Whats next? Well, you have to pick the
right one!
Alternative #1:
Visit Eaton.com/UPSselector
Alternative #2:
Call our knowledgeable inside sales team:
800.356.5794
Alternative #3:
Do it the old fashioned way. Completing
these steps is also very useful for the first
two alternatives.
1 List all equipment to be protected by the
UPS. (Remember to include monitors,
external hard drives, routers, etc.)
2 List the amps and volts for each device.
These ratings can typically be found on
the label on the back of the equipment.
Multiply amps by volts to determine
VoltAmps (VA). Some devices may list
their power requirements in watts. To
convert watts to VA, divide the watts by
power factor. For servers, the power
factor is often 0.9.
3 Multiply the VA by the number of pieces
of equipment to get the VA subtotals.
4 Add the VA subtotals together.
5 Multiply the total by 1.2 to get the grand
total. This step accounts for future
expansion.
6 Use the grand total to select a UPS.
When choosing a UPS, be sure that the
total VA requirement of supported
equipment does not exceed the VA
rating of the UPS.
Alternative #4:
Eatons UPS Tool for iPhone

, iPad

and
iPod touch

helps you find the best UPS

solution without being tied to your desk:
www.powerquality.eaton.com/upstools
UPS sizing worksheet
1 2 2 2 3 3
Equipment Amps x Volts = VA x Quantity = VA Subtotal

x = x =
x = x =
x = x =
x = x =
x = x =
x = x =
x = x =
x = x =
x = x =
x = x =
x = x =
x = x =
4 Total
5 x1.2
6 Grand Total
10 EATON Eaton UPS and Power Management Fundamentals Handbook
UPS cost
justification
worksheet
This worksheet helps you determine the estimated dollar savings that a UPS can deliver.
Simply fill in the information to calculate the costs of one hour of downtime. Actual dollar
amounts will vary from company to company, location to location, and industry to industry.
1. Number of critical loads:
Critical loads = any equipment running or supporting your
applications (servers, routers, PCs, network devices, etc.)
2. Number of employees using critical loads:
3. Employees average hourly earnings:
4. Estimated cost of lost business per hour of downtime
($1,000, $5,000, $10,000)
5. Cost of service calls per hour:
6. Cost of recreating or salvaging data (if applicable):
7. Cost of replacing hardware (if applicable):
8. Cost of reinstalling software (if applicable):


9. Lost employee time (line 2 x 3):
10. Lost business (line 4):
11. Service (line 5):
12. Recreating or salvaging data (line 6):
13. Replaced hardware and software (line 7 + 8):


14. Estimated total cost per hour of downtime: $
This is only one hour. Imagine if your systems were down all day!
11 EATON Eaton UPS and Power Management Fundamentals Handbook
With applications spanning from desktops to large data centers, UPSs come in a variety
of form factors.
UPS form factors
1
3
5
2
4
6
1. Desktop and tower UPS
a. The Eaton 3S UPS also fits easily
on top of or under a desk.
b. The Eaton 9130 tower UPS fits under
a desk or in a network closet.
2. Wall-mount UPS
The Eaton 5115 rackmount UPS includes
hardware to mount it to a wall.
3. Rackmount UPS
The Eaton 9130 rackmount UPS occupies
only 2U of rack space (fits both 2- and
4-post racks).
4. Two-in-one rackmount/tower UPS
The Eaton 5PX UPS can be mounted in
a rack or installed as a tower model.
5. Scalable UPS
a. The Eaton BladeUPS is a scalable,
redundant rackmount UPS.
b. The Eaton 9170+ is also a scalable,
redundant UPS.
6. Large tower UPS
The Eaton 9390 UPS is designed to be a
central backup for multiple loads, including
data centers.
a
b
a
b
A SOLUTION FOR
ANY SITUATION.
I COULDN' T HAVE
DESIGNED IT BETTER.
12 EATON Eaton UPS and Power Management Fundamentals Handbook
WHEN IT COMES TO
ELECTRICAL POWER,
THERE' S NO ROOM FOR
MONKEY BUSINESS!
When you receive a UPS, you should be
able to plug it in right away. If a UPS cant
be plugged into the wall socket, or their
equipment can't be plugged into it,
youve got a problem.
Any UPS with a rating of 1500 VA or below
can be plugged into a standard household
receptacle/socket. UPS models with ratings
higher than 1500 VA use input plugs that
cant be plugged directly into a standard
receptacle. Many higher rated UPSs (above
1500 VA) may also be hardwired directly into
the electrical distribution panel at the instal-
lation location by a licensed electrician.
Many UPS models offer a fixed set of input
and output receptacles. Other UPS models
can be configured with a custom set of
input and output connections.
For reference weve included the following
chart to help you visually confirm input and
output plug/receptacle options:
* 5-15P can plug into 5-20R
R = Receptacle, P = Plug, L = Locking
For the number before the hyphen:
5 = 125V, two-pole, three-wire (grounded)
6 = 250V, two-pole, three-wire (grounded)
14 = 125/250V, three-pole, four-wire (grounded)
The number after the hyphen indicates the amperage.
For example, the L5-30R is a 30A receptacle.
Input plugs and
output receptacles
Input plug and output receptacle chart
5-15R 5-15P 5-20R 5-20P
L5-30R L5-30P 6-15R 6-15P
L6-20R L6-20P L5-20R L5-20P
IEC-320-C13 (female) IEC-320-C14 (male) IEC-320-C19 (female) IEC-320-C20 (male)
L14-30R L14-30P IEC-309, 16A IEC-309, 32A
L6-30R L6-30P Terminal Block (Hardwired)
Know your North American receptacles
In North American markets, most facilities
utilize plugs and receptacles conforming to
standards established by the National
Electrical Manufacturers Association
(NEMA), which uses a smart code to define
what each part number represents. If you
know the part number of your connector,
you can find its voltage and amperage
ratings. Always check with your local
electrician to verify proper wiring and
installation.
How big can I go?
L 6 - 30 R
Value Max Voltage Wires in connector
5: 125V L1, N, G
6: 250V L1, L2, G
14: 125/250V L1, L2, N, G
15: 250V L1, L2, L3, G
21: 250V/125V L1, L2, L3, N, G
R Receptacle
P Plug
Amperage
matches breaker
rating feeding the
plug/receptacle
L Locking
13 EATON Eaton UPS and Power Management Fundamentals Handbook
1 2
3 4
1. Fixed
Smaller UPS models like the Eaton
9130 UPS provide a fixed set of output
receptacles
2. Customized
UPS models like the Eaton 9355 can be
customized with a variety of output
receptacles
3. Hardwired
Large UPS models like the Eaton 9390 are
hardwired to incoming utility power though
some models leverage output receptacles
4. Additional receptacles
Eaton ePDU products mount easily into
racks and provide additional receptacles
Local outlet
Typical largest UPS
rating per outlet
1
2
0
V
5-15R
5-20R
L5-30R
2
0
8
-
2
4
0
VL6-20R
L6-30R
2
0
8
-
2
4
0
V
IEC C13
IEC C19
1500VA 120V
2200VA 120V
3000VA 120V
3000VA 208V
6000VA 208V
2200VA 230V
3000VA 230V
A common question from IT managers is, I have a receptacle at my facility; what is the
biggest UPS can I connect to it? If youre looking at UPSs 6 kVA or lower, its a pretty
straight forward question to answer as shown below:
14 EATON Eaton UPS and Power Management Fundamentals Handbook
I THINK I' LL GO
WITH ASSISTED
STARTUP.
Self-startup
UPSs equipped with a standard input plug
(units 1500 VA and below) that fits into
standard wall sockets are very easy to
install. Units 2000 VA and above require a
different wall socket that may not already
exist in the location where the UPS will be
installed. In these cases, an electrician can
install the proper wall socket, after which
you should have little problem with UPS
installation.
Assisted startup
You may not feel comfortable installing
electrical equipmentjustifiably so. UPS
installation deals with electrical power and
batteriesboth of which can be dangerous
if not handled properly. In addition, UPS
batteries can be very heavy and some units
require a hardwired connection. As a result,
UPS manufacturers usually offer a startup
service for an additional fee. You can also
hire a systems integrator, electrician or
third-party service organization for UPS
installation.
Manufacturer-required startup
Many three-phase UPS models (typically
>40 kVA) must be started up by the UPS
manufacturer to ensure theyre properly
installed and calibrated. In general,
electricians and contractors dont have the
required in-depth knowledge of the UPS.
Manufacturer-trained field technicians
provide an overview of the equipment and a
tutorial of how to operate the UPS.
UPS
startup
15 EATON Eaton UPS and Power Management Fundamentals Handbook
The engineering answer: To correctly size a
UPS, its important to understand the
relationship between watts and VA.
However, we must first have a brief
discussion about power terminology. Real
power (measured in watts) is the portion of
power flow that results in the consumption
of energy. The energy consumed is related
to the resistance in an electrical circuit. An
example of consumed energy is the filament
in a light bulb.
Reactive power (measured in VAR or volt-
amps reactive) is the portion of power flow
due to stored energy. Stored energy is
related to the presence of inductance and/or
capacitance in an electrical circuit. An
example of stored energy is a charged flash
bulb in a camera.
Apparent power (measured in VA or volt-
amps) is a mathematical combination of
real power and reactive power.
The geometric relationship between
apparent power, reactive power and real
power is illustrated in the power triangle
below:
Mathematically, real power (watts) is related
to apparent power (VA) using a numerical
ratio referred to as the power factor (PF),
which is expressed in decimal format and
always carries a value between 0 and 1.0.
For many newer types of IT equipment,
such as computer servers, the typical PF
is 0.9 or greater. For legacy personal
computers (PCs), this value can be
0.60 0.75.
Using one of the following formulas, a
calculation can be made to determine the
missing quantity:
Watts = VA * Power Factor or VA = Watts /
Power Factor
Since many types of equipment are rated in
watts, its important to consider the PF
when sizing a UPS. If you don't take PF into
account, you may under size your UPS. As
an example, a piece of equipment thats
rated at 525 watts and has a power factor
of 0.7 results in a 750 VA load.
750 VA = 525 Watts / 0.7 PF
Sizing the UPS to operate at 75 percent
capacity results in a UPS with a 1000 VA
rating (750 VA / 0.75 = 1000 VA).
The answer for the rest of us:
Converting amps to VA
Single phase: Multiply amps by voltage (120
volts in the U.S.). 10A x 120V = 1200 VA.
Three phase: Amps x volts x 1.732 = VA.
Apparent Power (VA)
Real Power (Watts)
Reactive
Power
VAR
}
{
Apparent
power (VA);
Full capacity
Real power
(watts);
Actual usable
power
The difference
between VA
and watts
VA IS FOR WEAKLINGS.
I MEASURE MY
STRENGTH IN WATTS.
View the Professor
Wattson video on
VA vs Watts:
Switchon.eaton.com/ProfWattson
16 EATON Eaton UPS and Power Management Fundamentals Handbook
Decentralized or central UPS?
Is a single, larger UPS better, or is it best to
have multiple, smaller UPSs? Naturally, the
answer is that it depends on a number of
factors. In a decentralized (also known as
distributed) UPS configuration (see Figure
2), multiple UPSs support a handful of
devices or perhaps only a single piece of
equipment. Decentralized UPSs typically use
plug and play connections and are usually
less than or equal to six kVA. In a central
UPS configuration (see Figure 1), a larger
UPS supports multiple devices. A centralized
UPS is typically hardwired into an electrical
panelboard. The following tables include a
number of factors to consider when making
a decision between a decentralized and
central UPS. In the end it's often best to
simply go with the strategy that you are
comfortable with.
Decentralized
or central UPS?
Why youd choose a
central UPS solution
Why you wouldnt
Typically, the sales and service life of
the UPS is longer.
A single UPS can mean single point of
failure. You can overcome this
concern with an N+1 or N+X UPS for
redundancy.
A single UPS is easier to monitor,
service and maintain than lots of
smaller UPSs.
The single UPS may not be close
physically to the equipment it will
protect. A single electrical distribution
panel may not feed all equipment.
Larger UPSs will be three-phase and/
or 208V, 400V or 480V and often result
in more efficient operation and lower
operating costs.
There is no space for a large UPS.
A central UPS is often housed away
from high traffic areas. As a result,
its less easily disrupted, accidentally
damaged or maliciously interfered
with.
A central UPS generally requires a
trained service technician or
electrician to service, maintain or
install.
A central UPS can be located where
cooling is more tightly controlled.
Remember, heat is the enemy of the
batteries inside a UPS.
A central UPS may incur higher
installation and wiring costs.
Though a technician may need to
replace the batteries, you only have to
worry about a single UPS. A
distributed UPS configuration may
result in various models that require
different batteries. Do you want to
take the time to replace the batteries
on five to 20 UPSs?
Central UPS
Figure 1
17 EATON Eaton UPS and Power Management Fundamentals Handbook
Why youd choose a
decentralized UPS configuration
Why you wouldnt
No rewiring is required. Use existing
wall sockets. Easy plug and play
installation. Can also be redeployed
easily if IT systems are moved.
If a generator supports the building,
smaller standby and line-interactive
UPSs may not be able to function
while its running.
Requires lower capital outlay and
installation costs. Fits within IT
manager purchase limits. Generally
dont need to approve a large capital
expense. Will most likely not require
additional installation costs from
electrician.
No central panelboard exists or
theres no room for the UPS.
You have no idea how much your
company will grow and dont want to
get locked into a particular UPS.
You dont want to monitor or service a
bunch of UPS units. A decentralized
design may require more time and
focus to keep up with replacing
batteries and maintaining multiple
UPSs.
You already have a number of smaller
UPS units that are fairly new and you
dont want to discard them. (Most
UPS manufacturers offer a trade-in
program.)
You want a single UPS that can be
shut down using emergency power
off. Also, a decentralized design may
not offer redundancy and other
capabilities provided by a larger,
central UPS.
Power conditioning is implemented at
the point of use, which mitigates any
electrical disturbances that may be
coupled into the distribution wiring of
a centralized system.
Adding redundancy, extended runtime
or maintenance bypass functionality
to multiple UPSs can be costly.
Diverse applications within a building
may require varying levels of power
protection and functionality. For
example, extended runtime can be
configured for specific applications,
eliminating the need to add additional
battery modules for less critical
equipment.
Multiple audible alarms/alerts may be
irritating.
Decentralized UPS
Combining the configurations
Its important to keep in mind that decentralized and
centralized power protection deployment strategies arent
necessarily mutually exclusive. The two strategies can be
used in combination to provide redundancy to mission-
critical applications. For example, an entire facility may be
protected by a large, centralized UPS, but a specific depart-
ment such as a 24x7 call center may have decentralized
UPSs as well to provide redundant protection and possibly
extend runtime for call center equipment.
Figure 2
THAT OFFICE
FURNITURE IS
LOOKING REALLY
OLD. I LIKE IT.
18 EATON Eaton UPS and Power Management Fundamentals Handbook
Three-phase power, the most efficient
way to distribute power over long
distances, allows for large industrial
equipment to operate more efficiently. Its
characterized by three single-phase
waves that are offset in their phase angle
by 120 degrees, or one-third of the sine
wave period as illustrated in Figure 1.
Three-phase voltage can be measured from
each phase to neutral or from one phase to
any other. The voltage relation between
phase-to-neutral and phase-to-phase is a
factor of the square root of three (e.g., 120V
versus 208V).
Conversely, single-phase power is distrib-
uted through common household outlets to
power everyday equipment such as laptops,
lighting and televisions. When looking at an
oscilloscope image of the voltage coming
out of a single-phase outlet as illustrated in
Figure 2, theres only a single wave. Single-
phase power is obtained by simply using
only one phase of a three-phase system. Its
root mean square (RMS) voltage is 120V (for
North America) and it oscillates between its
peaks of 170V at 60 Hz (or 60 times a
second).
Single-phase or three-phase power?
What is
three-phase
power?
90 180 270 360
90 180 270 360
Figure 2. Single-phase power
Figure 1. Three-phase power
90 180 270 360
90 180 270 360
Single-phase
advantages
Three-phase
advantages
The standard for
locations where three-
phase power is
unavailable.
Can help balance the
loads on the utility
power of the building.
Usually easier to
distribute power in low
kVA and low-density
applications.
Usually easier to
distribute power in
higher kVA and high-
density rack
applications.
Allows for smaller
amperage electrical
devices within the
solution (breakers,
wiring, panels, etc.).
DID SOMEONE SAY
THREE-PHASE POWER?
19 EATON Eaton UPS and Power Management Fundamentals Handbook
HIGH VOLTAGE
MAKES ME SIZZLE!
Increase server energy efficiencies by using
high-voltage power supplies and 208V UPSs
Maximizing energy efficiencies in todays
data centers has become an important
factor in saving costs and reducing an
organizations carbon footprint. While
there are new energy-saving tools and
technologies being introduced every day,
understanding existing methods and
systems can bring immediate efficiencies
and savings, often without an additional
investment.
One such method is to operate equipment
at high-line voltage and use 208V UPSs,
which maximizes energy efficiency and
uptime, and saves money. IT devices
equipped with a C14 plug are capable of
running on high voltage, which can
dramatically increase efficiency.
Even small increases in UPS efficiency can
quickly translate into tens of thousands of
dollars in savings. For example, assuming a
utility rate of 10 cents per kWh, a 60 kW
N+1 redundant configuration would save
more than $30,000 over five years. High
UPS efficiency also extends battery
runtimes and produces cooler operating
conditions, resulting in lower utility bills.
At first glance, high-voltage input power
seems counter-intuitive when thinking about
energy savings. However, in the real world,
power supplies operate more efficiently at
high voltage. The typical server switch-mode
power supply has an efficiency rating
between 65 and 80 percent, with some
special-purpose products able to reach 90
percent efficiency. Lower voltage causes
the power supply to operate at the lower
end of this range.
When operating at 208 volts, a 1 to 2
percent difference in efficiency can be
experienced for a 1000W power supply,
depending on the load level. When the loss
in the power distribution transformer (PDU)
needed to get to the 120V is added, theres
an additional 1.5 to 2 percent savings.
Factor in cooling efficiencies and the savings
can add up to between 4 and 8 percent,
which translates to about $70 per power
supply. When multiplied by the number
of power supplies in the server rack, the
savings certainly justifies making the switch
to 208 volts, especially when expanding or
moving into a new location.
One of the main reasons that U.S.
customers have been reluctant to switch to
high voltage is that high voltage UPSs are
typically fitted with IEC outlets (or even
inlets) and customers dont know how
to connect them to IT equipment with a
traditional NEMA plug. However, all IT
power supplies come with a detachable
input cord with a NEMA plug on one side
and an IEC plug on the other. By simply
changing the standard NEMA/C13 power
cord to an IEC C13/C14 power cord, these
additional IT equipment efficiencies can be
captured. IEC cables are fully UL-listed and
are the standard method of connection in
large mission-critical data centers across
the U.S.
To read the complete white paper on this
subject, please visit
Eaton.com/pq/whitepapers.
Making the connections
Remove the standard 5-15P/C13 power cord that
shipped with your IT equipment and replace it with
one of the C13/C14 jumper cables that shipped
with your UPS. Your IT equipment is now
operating at 208V, running more efficiently and
saving you money.
20 EATON Eaton UPS and Power Management Fundamentals Handbook
Worldwide voltage map
110-127V; 60 Hz (also 208V; 60 Hz)
110-127V; 60 Hz
100V
220/230V; 50 Hz
240V; 50 Hz
60 Hz
50 Hz
Single-phase voltages*
I ROAMED THE
WORLD BEFORE
THERE WERE
VOLTAGES.
*Mixed voltages are present in several countries, including Vietnam, South Korea, Philippines, Brazil, Peru and Saudi Arabia
21 EATON Eaton UPS and Power Management Fundamentals Handbook
Afghanistan 220 380 50
Albania 230 400 50
Algeria 127/220 400 50
American Samoa 120/240 208 60
Andorra 230 400 50
Angola 220 380 50
Antigua 230 400 60
Armenia 230 380 50
Argentina 220 380 50
Aruba 115/127 220 60
Australia 240 415 50
Austria 220-230 400 50
Azerbaijan 220 380 50
Azores (Portugal) 220 400 50
Bahamas 120 208 60
Bahrain 220 400 50
Balearic Islands 230 400 50
Bangladesh 220 380 50
Barbados 115 200 50
Belarus 220 380 50
Belgium 220-230 400 50
Belize 110 190/380 60
Benin 220 380 50
Bermuda 120 208 60
Bhutan 230 400 50
Bolivia 110-115/220 400 50
Bosnia-Herzegovina 220 400 50
Botswana 220 400 50
Brazil 110-127 220/380/ 60
220 440 60
Brunei 240 415 50
Bulgaria 220 400 50
Burkina Faso 220 380 50
Burundi 220 380 50
Cambodia 120/220 400 50
Cameroon 220-230 380 50
Canada 120 208/240/600 60
Canary Islands (Spain) 220 400 50
Cape Verde 220 400 50
Cayman Islands 120 208 60
Central African Republic 220 380 50
Chad 220 380 50
Channel Islands 240 400 50
Chile 220 380 50
China 220 380 50
Colombia 110-220 440 60
Congo 220 400 50
Congo, Dem. Rep. of 220 380 50
(formerly Zaire)
Cook Islands 240 415 50
Costa Rica 120 240 60
Croatia 220 400 50
Cuba 120 190 60
Cyprus 240 400 50
Czech Republic 220 400 50
Denmark 220-230 400 50
Djibouti 220 380 50
Dominica 230 400 50
Dominican Republic 110 120/208/ 60
227/480
Ecuador 120 190 60
Egypt 220 380 50
El Salvador 115 200 60
England 240 400 50
Estonia 220 400 50
Ethiopia 220 380 50
Faeroe Islands 230 400 50
Falkland Islands 240 415 50
Fiji 240 415 50
Finland 220-230 400 50
France 220-230 400 50
French Guiana 220 380 50
Gabon 220 380 50
Gambia 220 400 50
Gaza 230 400 50
Georgia 220 380 50
Germany 220-230 400 50
Ghana 220 400 50
Gibraltar 240 400 50
Greece 220-230 400 50
Greenland 220 400 50
Grenada 230 400 50
Guadeloupe 220 400 50
Guam 110-120 190 60
Guatemala 120 208 60
Guinea 220 208 50
Guinea-Bissau 220 380 50
Guyana 110 190 50/60
Haiti 110-120 190 50/60
Honduras 110 190 60
Hong Kong 200 380 50
Hungary 220 400 50
Iceland 220 400 50
India 220-250 400 50
Indonesia 220 400 50
Iran 220 400 50
Iraq 220 400 50
Ireland 220 400 50
Isle of Man 240 400 50
Israel 230 400 50
Italy 220-230 400 50
Ivory Coast 220 380 50
Jamaica 110 190 50
Japan 100 200 50/60
Jordan 220 400 50
Kazakhstan 220 380 50
Kenya 240 415 50
Korea, South 220 380 50/60
Kuwait 240 415 50
Kyrgyzstan 220 380 50
Laos 220 400 50
Latvia 220 400 50
Lebanon 110-220 400 50
Lesotho 240 380 50
Liberia 120 208 60
Libya 127-230 220/400 50
Liechtenstein 220 400 50
Lithuania 220 400 50
Luxembourg 220-230 400 50
Macau 220 380 50
Macedonia 230 400 50
Madagascar 220 220/380 50
Madeira (Portugal) 220 400 50
Malawi 230 400 50
Malaysia 240 415 50
Maldives 230 400 50
Mali 220 380 50
Malta 240 400 50
Martinique 220 380 60
Mauritania 220 220 50
Mauritius 230 400 50
Mexico 127 220/480 50
Moldova 220 380 50
Monaco 220 400 50
Mongolia 220 400 50
Montserrat 230 400 60
Morocco 220 380 50
Mozambique 220 380 50
Myanmar 230 400 50
Namibia 220-250 380 50
Nauru 240 415 50
Nepal 220 400 50
Netherlands Antilles 120-127/220 220/380 50/60
Netherlands 220-230 400 50
New Caledonia 220 380 50
New Zealand 230 415 50
Nicaragua 120 208 60
Niger 220 380 50
Nigeria 230 400 50
Northern Ireland 240 400 50
Norway 220-230 400 50
Okinawa 110-120 200/230 60
Oman 240 415 50
Pakistan 230 400 50
Palau 120 208 60
Panama 110-120 190 60
Papua New Guinea 240 415 50
Paraguay 220 380 50
Peru 110/220 220 50/60
Philippines 115 380 60
Poland 240 400 50
Portugal 220 400 50
Puerto Rico 220-230 208 50
Qatar 240 415 50
Runion Island 230 400 50
Romania 220 400 50
Russia 220 400 50
Rwanda 220 400 50
Saudi Arabia 127/220 190/380 50/60
Scotland 220 400 50
Senegal 220 400 50
Serbia 230 400 50
Seychelles 240 240 50
Sierra Leone 230 400 50
Singapore 230 400 50
Slovakia 220 400 50
Slovenia 230 400 50
Somalia 110/220 380 50
South Africa 220-230 400 50
Spain 220-230 400 50
Sri Lanka 230 400 50
St. Kitts & Nevis 230 400 60
St. Lucia 240 400 50
St. Vincent 230 400 50
Sudan 240 400 50
Surinam 115 220 60
Swaziland 230 400 50
Sweden 220-230 400 50
Switzerland 220-230 400 50
Syria 220 380 50
Tahiti 220 380 50
Taiwan 110 190 60
Tajikistan 220 380 50
Tanzania 230 400 50
Thailand 220/230 380 50
Togo 220 380 50
Tonga 115 415 60
Trinidad & Tobago 115/23 200 60
Tunisia 220 400 50
Turkey 220 400 50
Turkmenistan 220 380 50
Uganda 240 415 50
Ukraine 220 380 50
United Arab Emirates 220/230 415 50
United Kingdom 240 400 50
United States 120 277/480 60
Uruguay 220 220 50
Uzbekistan 220 380 50
Venezuela 120 240 60
Vietnam 120/220 380 50
Virgin Islands 120 190 60
Wales 220 400 50
Western Samoa 230 400 50
Yemen 220 400 50
Zambia 220 400 50
Zimbabwe 220 415 50
Worldwide voltages
Single- Three-
phase phase
voltage voltage Frequency
Country (V) (V) ) (Hz)
Single- Three-
phase phase
voltage voltage Frequency
Country (V) (V) ) (Hz)
Single- Three-
phase phase
voltage voltage Frequency
Country (V) (V) ) (Hz)
Single- Three-
phase phase
voltage voltage Frequency
Country (V) (V) ) (Hz)
22 EATON Eaton UPS and Power Management Fundamentals Handbook
The nine power problems
Power Problem Definition
Power Failure
Power Sag
Power Surge
(Spike)
Over-voltage
Electrical
Line Noise
Frequency
Variation
Harmonic
Distortion
1
2
3
4
5
6
7
8
9
Under-voltage
(Brownout)
Switching
Transient
In an ideal world, your wall socket would provide an infinite stream of perfect power, at
constant voltage and cycling exactly the same number of times per second. Dont count on it.
When a superhero loses his ability to fly or a total loss of utility power.
Post-lunch sleepiness or short-term low voltage.
Rush of energy following a double shot of espresso or short-term high voltage more
than 110 percent of normal.
When your amps too wimpy to handle the bass line or reduced line voltage for an
extended period of a few minutes to a few days. Often happens during the summer
months when everyone is cranking up their air conditioners.
Inhuman cheefulness exuded by aerobics instructors or increased line voltage for an
extended period of a few minutes to a few days.
Excuse you use to get off the phone quickly or a high power frequency power wave
caused by radio frequency interference (RFI) or electromagnetic interference (EMI).
Fluctuation in how often you do laundry from week to week or a loss of stability in the
power supplys normal frequency of 50 or 60 Hz.
Breaking up with your significant other only to get back together every six months or
instantaneous under-voltage in the range of nanoseconds.
Music blaring from your nephews headphones or the distortion of the normal power
wave, generally transmitted by unequal loads.
AH, MORE
MINIONS FOR
MY EVIL PLAN!
23 EATON Eaton UPS and Power Management Fundamentals Handbook
UPS topologies
Normal Operation
Battery Power
There are several different UPS topologies that provide varying degrees of protection. Selecting
the best fit depends on several factors, including the level of reliability and availability desired,
the type of equipment being protected and the application/environment. While all four of the
most common UPS topologies outlined below meet the input voltage requirements for IT
equipment, there are key differences in how the result is achieved, as well as the frequency
and duration of demands on the battery.
Standby UPSs allow equipment to run off utility power until the UPS detects a problem, at
which point it switches to battery power to protect against sags, surges or outages. This
topology is best suited for applications requiring simple backup such as small office/home office
and point-of-sale equipment.
Line-interactive UPSs actively regulate voltage either by boosting or decreasing utility power
as necessary before allowing it to pass to the protected equipment or by resorting to battery
power. Line-interactive models are ideal for applications where protection from power
anomalies is required, but the utility power is relatively clean. MDF and IDF communication
closets, non-centralized server and network rooms, and general IT enclosures are ideally suited
for this topology.
Online UPSs provide the highest level of protection by isolating equipment from raw utility
powerconverting power from AC to DC and back to AC. Unlike other topologies, double
conversion provides zero transfer time to battery for sensitive equipment. This topology is best
applied to mission-critical equipment and locations where power generally is poor.
Ferroresonant UPSs operate similarly to line-interactive models with the exception that a
ferroresonant transformer is used to condition the output and hold energy long enough to
cover the time between switching from line power to battery power which effectively means
a no-break transfer. Many ferroresonant UPSs are 82-88 percent efficient and offer excellent
isolation. Although no longer the dominant type of UPS, these robust units are still used in
industrial settings such as the oil and gas, petrochemical, chemical, utility and heavy
industry markets.
AC to DC
Rectifier
DCto AC
Inverter
Battery
Charger
DCto AC
Inverter
AC to DC
Rectifier
Internal Static Bypass
Buck Boost
DCto AC
Inverter
Battery
Battery
Battery
DCto AC
Inverter
Battery
Capacitor
AC to DC
Rectifier
DCto AC
Inverter
Battery
Charger
DCto AC
Inverter
AC to DC
Rectifier
Internal Static Bypass
Buck Boost
DCto AC
Inverter
Battery
Battery
Battery
DCto AC
Inverter
Battery
Capacitor
AC to DC
Rectifier
DCto AC
Inverter
Battery
Charger
DCto AC
Inverter
AC to DC
Rectifier
Internal Static Bypass
Buck Boost
DCto AC
Inverter
Battery
Battery
Battery
DCto AC
Inverter
Battery
Capacitor
AC to DC
Rectifier
DCto AC
Inverter
Battery
Charger
DCto AC
Inverter
AC to DC
Rectifier
Internal Static Bypass
Buck Boost
DCto AC
Inverter
Battery
Battery
Battery
DCto AC
Inverter
Battery
Capacitor
24 EATON Eaton UPS and Power Management Fundamentals Handbook
Valve-regulated lead acid (VRLA) batteries,
also known as sealed or maintenance free
are most commonly used in UPSs. VRLA
batteries are sealed, usually within
polypropylene plastic, which offers the
advantage of not containing any sloshing
liquid that might leak or drip. Because water
cant be added to VRLA batteries,
recombination of water is critical to their life
and health, and any factor that increases the
rate of evaporation or water losssuch as
temperature or heat from the charging
currentreduces battery life.
Frequently asked
questions: batteries
1. What is the end of useful life?
The IEEE defines end of useful life for a
UPS battery as the point when it can no
longer supply 80 percent of its rated
capacity in ampere-hours. When your
battery reaches 80 percent of its rated
capacity, the aging process accelerates and
the battery should be replaced.
2. Is there any difference between the
batteries used by smaller UPSs, from 250
VA to 3 kVA, and the ones used by larger
UPSs?
While basic battery technology and the risks
to battery life remain the same regardless of
UPS size, there are some inherent
differences between large and small
applications. Smaller UPSs typically have
only one VRLA battery that supports the
load and needs maintenance. As systems
get larger, increasing battery capacity to
support the load gets more complicated.
Larger systems may require multiple strings
of batteries, introducing complexity to
battery maintenance and support. Individual
batteries must be monitored to prevent a
single bad battery from taking down an
entire string, and putting the load at risk.
Also, as systems get larger, wet-cell
batteries become much more common.
UPS battery
overview
Its well known that the battery is the most vulnerable part of a UPS. In fact, battery failure
is a leading cause of load loss. Understanding how to properly maintain and manage UPS
batteries can extend their service life and help prevent costly downtime.
Figure 1. VRLA batteries are frequently used in UPS or
other high-rate applications.
Figure 2. Internal and external components of a valve-regulated lead acid (VRLA) battery.
Positive Flag
Terminal Valve
Polypropylene
Container/Jar
Separator
Extruded Intercell
Welded Connection,
Low Resistance
Current Path
Negative
Pasted Plate
Lead Alloy
Grid
Strap Joining
Negative
Plates in
Parallel
Cover/Lid
View the Professor
Wattson video on
Batteries:
Switchon.eaton.com/ProfWattson
25 EATON Eaton UPS and Power Management Fundamentals Handbook
3. My UPS has been in storage for over a
year. Are the batteries still good?
As batteries sit unused, with no charging
regimen, their life will decrease. Due to the
self-discharge characteristics of lead-acid
batteries, it is imperative that they be
charged after every six to 10 months of
storage. Otherwise, permanent loss of
capacity will occur between 18 and 30
months. To prolong shelf life without
charging, store batteries at 10C (50F) or
less.
4. What is the difference between
hot-swappable and user-replaceable
batteries?
Hot-swappable batteries can be changed out
while the UPS is running. User-replaceable
batteries are usually found in smaller UPSs
and require no special tools or training to
replace. Batteries can be both hot-
swappable and user-replaceable.
5. How is battery runtime affected if I
reduce the load on the UPS?
The battery runtime will increase if the load
is reduced. As a general rule, if you reduce
the load by half, you triple the runtime.
6. If I add more batteries to a UPS, can I
add more load?
Adding more batteries to a UPS can increase
the battery runtime to support the load.
However, adding more batteries to the UPS
doesnt increase the UPS capacity. Be sure
your UPS is adequately sized for your load
and then add batteries to fit your runtime
needs.
7. If my UPS is in storage, how often
should I charge the batteries?
The batteries should be charged every three
or four months to prevent loss of capacity.
8. What is the average lifespan of UPS
batteries?
The standard lifespan for VRLA batteries is
three to five years. However, expected life
can vary greatly due to environmental
conditions, number of discharge cycles, and
adequate maintenance. Have a regular
schedule of battery maintenance and
monitoring to ensure you know when your
batteries are reaching their end-of-life. The
typical life of an Eaton UPS with ABM
technology is 50 percent longer than with
standard models.
9. Why are batteries disconnected on
small, single-phase UPSs when theyre
shipped?
This is done to ensure theyre in compliance
with Department of Transportation
regulations.
10. Does the UPS need to have a load on
it to charge its batteries?
The UPS should have a minimum of
10 percent load to charge its batteries.
Once connected to a standard supply of
electricity (via input plug or hardwiring), your
UPS should charge its batteries regardless
of how much load, if any, is attached to it.
11. How can you be sure UPS batteries
are in good condition and ensure they
have maximum holdover in the event of a
power failure? What preventive
maintenance procedures should be done
and how often?
The batteries used in the UPS and
associated battery modules and cabinets are
sealed, lead-acid batteries often referred to
as maintenance-free. While these types of
batteries are sealed and you dont need to
check their fluid level, they do require some
attention to assure proper operation. You
should inspect the UPS a minimum of once
per year by initiating a self-test.
12. How long does it take for the UPS
batteries to recharge?
On average, it takes 10 times the discharge
time for the UPS batteries to recover. (A
30-minute battery discharge requires about
300 minutes to recharge.) After each power
outage, the recharge process begins
immediately. Its important to note that the
load is fully protected while the batteries are
recharging, but if the batteries are needed
during that time, the holdover time available
will be less than it would have been if the
batteries were fully charged.
13. What are the risks associated with a
lack of battery maintenance?
The primary risks of improperly maintained
batteries are load loss, fire, property damage
and personal injury.
14. What is thermal runaway?
Thermal runaway occurs when the heat
generated in a lead-acid cell exceeds its
ability to dissipate it, which can lead to an
explosion, especially in sealed cells. The
heat generated in the cell may occur without
any warning signs and may be caused by
overcharging, excessive charging, internal
physical damage, internal short circuit or a
hot environment.
15. Why do batteries fail?
Batteries can fail for a multitude of reasons,
but common reasons are:
High or uneven temperatures
Inaccurate float charge voltage
Loose inter-cell links or connections
Loss of electrolyte due to drying out or
damaged case
Lack of maintenance, aging
16. How is battery performance generally
measured?
Batteries are generally rated for 100+
discharges and recharges, but many show a
marked decline in charging capacity after as
few as 10 discharges. The lower the charge
the battery can accept, the less runtime it
can deliver. Look for batteries with a high-
rate design that sustains stable performance
for a long service term.

Figure 3. UPS models like the Eaton 9130 feature

hot-swappable batteries for maximum uptime.

Figure 4. Adding extended battery modules

increases runtime but doesnt increase the
power rating or capacity of the UPS.
26 EATON Eaton UPS and Power Management Fundamentals Handbook
Factors affecting
battery life
For additional information on UPS batteries, to use
the Eaton battery replacement selector, or to request
a free copy of Eatons battery handbook, visit
Eaton.com/upsbatteries.
BATTERIES ARE
HEAVY. THEY GET
ME PUMPED UP.
All UPS batteries have a limited service life,
regardless of how or where the UPS is
deployed. While determining battery life can
be tricky, there are four primary factors that
contribute to a batterys overall lifespan.
1. Ambient temperature
Because the rated capacity of a battery is
based on an ambient temperature of 25C
(77F), any variation from this can affect
performance and reduce battery life. For
every 8.3C (15F) average annual
temperature above 25C (77F), the life of
the battery is reduced by 50 percent.
2. Battery chemistry
UPS batteries are electro-chemical devices
whose ability to store and deliver power
slowly decreases over time. Even if all
guidelines for storage, maintenance and
usage are followed, batteries will still require
replacement after a certain period of time.
3. Cycling
After a UPS operates on battery power
during a power failure, the battery is
recharged for future use, which is called the
discharge cycle. At installation, the battery is
at 100 percent of its rated capacity, but each
discharge and subsequent recharge slightly
reduces its relative capacity. Once the
chemistry is depleted, the cells fail and the
battery must be replaced.
4. Maintenance
For larger UPS models, service and
maintenance of batteries are critical to its
reliability. Periodic preventive maintenance
not only extends battery string life by
preventing loose connections and removing
corrosion, but can help identify ailing
batteries before they fail. Even though
sealed batteries are sometimes referred to
as maintenance free, they still require
scheduled service, as maintenance free
refers only to the fact that they dont require
replacement fluid.
27 EATON Eaton UPS and Power Management Fundamentals Handbook
Operating a UPS without power
management software is kind of like driving
in the rain without windshield wipersyou
may be protected from the downpour, but
your visibility only lasts for so long.
While a UPS protects the attached load
during a power outage, power management
software is required to ensure that all work-
in-progress is saved and sensitive electronic
equipment is gracefully shut down if the
power outage exceeds battery runtime.
Without software, the UPS simply runs until
its batteries are depleted and then drops the
load.
In addition to facilitating automatic, orderly
shutdown of all connected devices during an
extended outage, power management
software delivers a broad spectrum of other
advantages. The perfect complement to any
UPS solution, management software keeps
a constant pulse on network health through
its monitoring and management capabilities.
Most power management software is
shipped with the UPS and is usually
available as a free download online as well.
Power event notifications are available as
audible alarms, pop-up alerts on a monitor,
emails to pre-designated recipients based
on the condition, text messages, phone calls
from our remote monitoring center, and
triggers for a multitude of network and
building management systems to initiate the
orderly shutdown of equipment.
Some software offerings are capable of
delivering a global view across the network
often from any PC with an Internet
browser. Software can also provide a
complete log of events and UPS utility data,
which is invaluable when debugging a
power anomaly. Many power management
products have the ability to centralize
alarms, organize data by customized views
and maintain event logs for preventive
maintenance of the entire installed
equipment base.
The more robust and versatile software
offerings are compatible with devices that
support a network interface, including all
manufacturers UPSs, environmental
sensors, ePDUs and other devices.
Furthermore, power management software
enables load segment control for UPS
models supporting that feature.
Because power protection and management
are just as vital for virtual machines as they
are for physical servers, new software
technologies have been specifically
designed to provide monitoring and
management capabilities in virtualized
environments. Shutdown software is now
compatible with VMwares ESXi and
vSphere and Microsofts Hyper-V, enabling
graceful shutdown of multiple virtual
machines.
UPS software
overview
Figure 1. Eatons Intelligent Power Manager facilitates easy and versatile remote monitoring and management of
multiple devices, keeping you apprised of power and environmental conditions.
To view an online demonstration of Eatons power
management software capabilities, please visit
Eaton.com/intelligentpower.
EVEN I COULD USE
A LITTLE MORE
VISIBILITY TO NETWORK
POWER CONDITIONS.
View the Professor
Wattson video on
Virtualization:
Switchon.eaton.com/ProfWattson
Service overview
One of the best ways to protect your
investment is by including a service
plan. Scheduled preventive maintenance
can help detect a wide range of ailments
before they become serious and costly
issues.
Research indicates that regular, routine
preventive maintenance is crucial to achieve
maximum equipment performance; studies
show it appreciably reduces the likelihood
that a UPS will succumb to downtime. The
2007 Study of Root Causes of Load Losses
compiled by Eaton revealed that customers
without preventive maintenance visits were
almost four times more likely to experience
a UPS failure than those completing the
recommended biannual preventive
maintenance visits.
All manufacturers UPSs are complex
devices that perform several critical power
conditioning and backup supply functions
and are subject to failure. Without proper
maintenance, all UPSs will eventually fail
over their useful life, since critical
components like batteries and capacitors will
wear out from normal use. A good
maintenance plan delivered by trained and
experienced personnel can greatly minimize
this risk of failure.
28 EATON Eaton UPS and Power Management Fundamentals Handbook
I NEED MAINTENANCE,
TOO!
29 EATON Eaton UPS and Power Management Fundamentals Handbook
For more information on UPS service, and to
access service-related white papers, please visit
Eaton.com/upsservices.
Figure 1. Smaller UPS models are usually sent to a
repair facility.
Types of UPS service
There are several UPS service delivery
methods, including:
Factory warranty repair or replace.
You contact the UPS service provider and
ship your UPS to a repair facility. The
service provider returns the repaired unit
or a refurbished unit.
Extended warranty advance swap
depot exchange.
You contact your UPS service provider,
which ships a refurbished unit to you; the
original UPS unit is returned to a repair
facility. Typically this expedites a
replacement UPS by the next business
day and freight costs are paid both ways
by Eaton.
Onsite repair. You contact your UPS
service provider and factory-trained field
technicians travel to your site to diagnose
and repair electronic or battery-related
problems.
Smaller UPS products (below 1000 VA)
generally can be repaired at a depot, while
products over 1000 VA and up to 18 kVA can
either be repaired at a depot or serviced
onsite. Larger UPSs that are either
hardwired (cant be unplugged) or too heavy
to ship can only be serviced onsite by
trained technicians.
Types of service
agreements
A variety of different UPS service options
are available, any of which will likely save
you time and money by minimizing business
interruption and the costs of downtime, as
well as enhancing overall return on
investment by extending the lifespan of
critical power equipment.
Support agreements, or service
contracts, usually combine parts and
labor coverage (electronics, batteries or
both), one or more UPS preventive
maintenance inspections annually, and a
combination of coverage hours and arrival
response time. Plans can be tailored to
meet almost any need. Special features
like remote monitoring, battery
replacement insurance and spare part kits
may also be added.
Extended warranty (or basic warranty)
may also be purchased for many UPS
products. A warranty commonly covers
specified parts and labor such as
electronic components for a fixed period
of time. Warranties may have limited
response times or exclude features like
scheduled preventive maintenance. The
more services added to a warranty, the
closer it becomes to a support
agreement.
Time and material (T&M) service is a
pay-as-you-go approach through which the
service provider makes a repair only
when something breaks. T&M can be
done either via depot repair or onsite,
depending on the UPS. This method
can be an unacceptable service solution
for some customers, since its often
expensive, and theres the uncertainty
of not knowing when a field technician
will arrive. Because support agreement
(contract) customers always take priority,
T&M response times can be up to five
days, based on the product and location.
Figure 3. Eaton is one of the UPS companies that
provides remote monitoring services. The Eaton service
offering
Eaton offers power quality services for
its UPS products as well as for related
equipment such as power distribution units
(PDUs) and batteries. Eaton also services
products from legacy brands, including
Powerware, Exide Electronics, Best Power,
MGE Office Protection Systems, IPM,
Deltec and Lortec. Eaton has more than
40 years of experience designing and
servicing industry-leading UPSs for
government, healthcare, industrial and
data center applications.
We compiled the following set
of questions based on our extensive
experience dealing with resellers and end
users. For frequently asked questions about
UPS batteries, please visit the UPS battery
overview section on page 24.
1. Whats the difference between a surge
protector and a UPS?
A surge protector provides just thatsurge
protection. In addition to surge protection, a
UPS continually regulates incoming voltage
and provides battery backup in the event of
a power failure. You'll often see surge
protectors plugged into a UPS for added
surge protection and additional output
receptacles.
2. How much capacity of a UPS should
I use?
To allow for future expansion, we
recommend that you install a UPS at
approximately 75 percent capacity. In
addition, the batteries degrade over time;
by oversizing, you provide room for error.
In the online Eaton UPS sizing tool
(Eaton.com/UPSselector) weve included
a capacity used column.
3. How much UPS battery runtime do
I need?
During an outage, you need enough battery
runtime to gracefully shut down systems or
switch to backup generators. You may add
an optional external battery module (EBM)
to increase runtime.
4. How is battery runtime impacted if
I reduce the load on the UPS?
There can be a significant increase in
runtime. Generally speaking, a UPS that
provides five minutes at full load will provide
15 minutes at half load.
5. My business is too small for protective
measures. Do I really need a UPS?
Power problems are equal-opportunity
threats. Your PCs, servers and network are
just as critical to your business as a data
center is to a large enterprise. Downtime is
costly in terms of hardware and potential
loss of goodwill, reputation and sales. Also
add in the delays that inevitably occur when
rebooting locked-up equipment, restoring
damaged files and re-running processes that
were interrupted. A sound power protection
strategy is cost-effective insurance.
6. Why is power quality such a problem
today?
Todays high-tech IT equipment and control
units are much more sensitive to electrical
disturbances and are more important to the
critical functions of many businesses than
in the past. As a result, power quality
problems today are more frequent and
more costly than ever.
7. Are power quality problems always
noticeable?
No. In many cases, disturbances can cause
imperceptible damage to circuits and other
components, a major cause of premature
equipment failure and problems like
computer lockups. Many power quality
problems go unresolved, resulting in lost
revenue and data.
8. How is reliability measured?
Power reliability is usually stated as a
percent of time the power is available. For
example, the power grid system in the U.S.
provides three nines of reliabilitythe
power is available for 99.9 percent of the
time. Because those 8.8 hours of downtime
translate into significant downtime and
expense, IT and telephone network services
require at least five nines of reliability.

9. How are phone systems and IT
equipment affected by inconsistent
power?
Fluctuating power is a waste of valuable
time and money. If customers expose their
telephone systems (and any other electronic
equipment) to inconsistent utility power,
theyre vulnerable to hardware and software
damage, data corruption and communication
breakdown. The time and cost of replacing
equipment, as well as the business lost
during breakdown and replacement, can
greatly affect a companys bottom line.
Frequently
asked
questions
Reliability average Non-availability per year
99% 88 hours
99.9% 8.8 hours
99.99% 53 minutes
99.999% 5.3 minutes
99.9999% 32 seconds
99.99999%+ 3.2 seconds
30 EATON Eaton UPS and Power Management Fundamentals Handbook
31 EATON Eaton UPS and Power Management Fundamentals Handbook
10. We have a generator. Do I still need
a UPS?
A generator will NOT protect your
equipment against power problems. You
need a UPS to guarantee that the
equipment stays up until the generator
kicks on and stabilizeswhich often requires
several minutes.
11. How much UPS capacity do I need?
Determine the total load (in watts) of
the equipment you want to protect.
Add 1020 percent for future growth and
decide the minimum amount of runtime
you need. Use the online sizer at
(powerquality.eaton.com) to identify
the right solution for your application.
12. What are the different levels of surge
protection?
There are three typical levels:
A. Lightning arrestors. Big and mean, usually
found in large facilities located in high-risk
areas. Takes an extremely high voltage and
clamps it down.
B. Surge Protective Devices (SPD or TVSS).
Mounted on your panelboard or load center;
sometimes larger UPS models may have
some level of this, but typically not a great
amount. Clamps voltage down two even
lower tolerances (~1 kV or less).
C. Local outlet level surge protector. A
simple surge strip; small plug-and-play UPSs
often have this as well. Brings voltage down
to levels that will not permanently damage
connected equipment (typically ~380V).
Lightning strikes have such an incredible
amount of energy that only an expensive
lightning arrestor would protect you from a
direct hit and they often don't guarantee
complete protection. For the best protection
against lightning strikes, you want to
develop a two-stage defense with
something at your panel and something at
the outlet level. Visit Eaton.com/spd for
some informative videos and additional
information.
13. What happens if the UPS is
overloaded, for example, if the protected
equipment and/or load draws more
current than it can provide.
The UPS transfers the load to bypass (for a
few minutes) until the overload condition is
reversed. If the overload condition
continues, some UPS models automatically
shut down. Some models can run at 110V
indefinitely in bypass.
14. What causes a UPS to be overloaded?
There are two possible answers: (1) the UPS
was undersized (e.g., the load is rated at
1200 VA, but a 1000 VA UPS was provided),
or (2) you plugged more equipment into the
UPS than it was designed to handle.
15. I have a 3000 VA UPS. Can I just plug
the unit into a standard 15A wall outlet?
Only UPSs with power ratings up to 1500
VA plug into a standard 15A wall outlet. All
others require a larger receptacle, which
must be installed by an electrician.
16. Why is power management software
important?
Although UPSs are typically rugged and
reliable, they do require ongoing monitoring
and support. Power management software
continuously monitors and diagnoses the
state of the grid, batteries and power
sources, together with the condition of the
UPSs internal electronics. Eaton UPS
software and connectivity cards enable
remote monitoring and management
capability, including graceful shutdown and
load segment control.
17. Will my current UPS software monitor
my new Eaton UPS?
Yes, you can monitor your Eaton UPS with
any UPS or facility management software
that supports the industry standard
Management Information Base (MIB, RFC
1628) as long as you install the optional
connectivity card. Most UPS vendors
support this MIB and all good facility
management software, including
OpenManage, OpenView and Tivoli also
support it. Extended Eaton Advanced MIBs
are available for greater levels of detail.
You can remotely control your Eaton UPS
using the Eaton UPS management software
or through a secure web interface if you
choose the optional connectivity card, which
also allows for automated email alerts for
power events without needing to install any
software.
18. My data center only went down for a
couple of minutes. Whats the big deal?
When a data center goes down and then
back up during a power outage without a
managed shut down, it doesn't come up
nicely. Storage arrays initialize after servers
that try to mount their shares, while some
servers boot without access to DNS servers
that are also booting and thus have other
problems. Although the outage was short, it
can take hours to get everything back
online. In addition, data corruption is a
serious concern.
19. Where can I get technical help?
Contact your territory representative or call
the Eaton UPS hotline at 1-800-356-5794 for
pre-sales support and 1-800-356-5737 for
technical support. You can also visit
www.powerquality.eaton.com.
A GENERATOR?
I ALREADY HAVE
MY OWN!
32 EATON Eaton UPS and Power Management Fundamentals Handbook
The flow of electricity begins at the
utility company, where its created at the
generating station. A generator trans-
former at the station switchyard then
steps up the voltage to minimize cable
size and electrical losses.
The transmission substation then increases
the voltage, which depends on the distance
the power needs to travel and the amount
desired. Electricity then enters the
transmission system, traveling at nearly the
speed of light, over heavy cables strung
between tall towers. A step-down
transformer located at a substation near the
final destination reduces the voltage to
between 22,000 and 69,000 volts, so the
electricity can be carried on smaller
distribution lines that carry it to the end
user. Transformers that adjust the voltages
down to the proper level for use are located
at or near each end user facility. For
commercial use, the load can range from
416 volts to 480 volts, while residential use
is typically 208/120 volts in the U.S. and
Canada.
Electric transmission
distribution system
2
3
4
6 5
7
8
9 10
11
12
15
13 14
1
Overhead
Transmission
Lines
Switchgear Breaker
Transformer
Overhead
Main
Feeder
Lateral
Fuse
Lightning
Arrestors Static
Residential
Small Business
Customer Service
Pad Mounted
Transformer
Underground
Service
Underground
Transmission
Lines
Underground
Main Feeder
230,000 Volts
Commercial Customer
Service Equipment
Commercial Load
480/277 volts
380/220 volts
416/240 volts
Powers Poles
Conduits
12,470
Volts
Substation
Residential Load
120V and 280V
33 EATON Eaton UPS and Power Management Fundamentals Handbook
Threats to the system
At each stage, there are a number of threats
that can interrupt the flow and distribution of
electricity. Everything from lightning strikes
to failed equipment can severely affect the
end user and disrupt important and vital
processes.
1 Fire sparked by weak wire
burns through line
2 Lightning strike damages
transmission line
3 Bird flies in causing short circuit
4 Thieves steal copper
5 Blown fuse at substation transformer
6 Squirrels and raccoons chew through
a wire or wander into the wrong area
7 Underground explosion causes cable
failure
8 Storm blows branches and limbs down
that crash into power lines
9 Equipment malfunction
10 Mylar balloons drift into power lines
11 Three-car collision strikes utility pole
12 Failure of underground cable
13 Equipment failure
14 The power goes out and no one
knows why
15 Utilities conduct a planned outage for
repairs or upgrades
TREES, ROADS, GRASS AND
POWER LINES. WHERE AM I
SUPPOSED TO LAND?
34 EATON Eaton UPS and Power Management Fundamentals Handbook
Eatons
Blackout
Tracker
35 EATON Eaton UPS and Power Management Fundamentals Handbook
Impact of power
outages
Every day, an interruption to electrical
service in homes, businesses and public
sector organizations occurs, and the losses
from these power outages can be extensive
and of great consequence. For a business,
the recovery time is significant and the
costs are high. According to Price
Waterhouse research, after a power outage
disrupts IT systems:
>33 percent of companies take more than
a day to recover
10 percent of companies take more than
a week
It can take up to 48 hours to reconfigure
a network
It can take days or weeks to re-enter
lost data
90 percent of companies that experience
a computer disaster and don't have a
survival plan go out of business within
18 months
Power outages can cause substantial losses
for the companies affected. According to
the U.S. Department of Energy, when a
power failure disrupts IT systems:
33 percent of companies lose $20,000-
$500,000
20 percent lose $500,000 to $2 million
15 percent lose more than $2 million
Eatons Blackout Tracker monitors
power outages across the U.S. and
Canada to provide a snapshot of
reported power outages. The Blackout
Tracker is an interactive and educational
way to share information about the
causes, frequencies and impact of
power outages. You can view a region
or individual state or province to see
specific information about power
outages, including their cause, duration
and number of people affected. Visit
Eaton.com/blackouttracker to see this
interactive tool and order the latest
Blackout Tracker annual report.
ON THE WALKING
DEAD, THERE IS
NO ELECTRICITY.
I LIKE THAT.
The following data was compiled by
Eaton based on reported power outages
during 2012.
Notes:
A. Total number of people affected (and average) is based on 2,167 (63%) of the total reported outages. Total
duration of outages (and average) is based on 991 (29%) of the total reported outages. These are the number
of outages that had reports including data for number of people affected and duration, respectively.
B. Reports from news services, newspapers, websites, etc. used as sources, sometimes give statistics using
different terms. For example, some reports may be based on people while others may be based on
addresses, homes and businesses or utility customers. For purposes of this report, all of these are
assumed to be and counted as people.
Overview
of 2012
US national
power outage
data
Total number of people affected by outages 23,488,028
(This is the sum of the number of people affected by reported power outages in the
U.S. for 2012.)
Total duration of outages
74,598 minutes (approximately
1,243 hours or 52 days)
(This is the sum of the durations of the reported power outages.)
Total number of outages 2,808
(This is the sum of the number of reported power outages.)
Average number of people affected per outage 12,648
(This number is determined by dividing the Total number of people affected by
outages by the number of outages that reported the number of people affected.
Not all reports of outages included number of people affected.) See Note A below.
Average duration of outage 154 minutes (over 2.5 hours)
(This number is determined by dividing the Total duration of outages by the number
of outages that reported durations. Not all reports of outages included the duration.)
See Note B below.
36 EATON Eaton UPS and Power Management Fundamentals Handbook
37 EATON Eaton UPS and Power Management Fundamentals Handbook
Animal
953
246
425
23
159
791
202
Faulty Equipment /
Human Error
Planned
Theft / Vandalism
Unknown
Vehicle Accident
Weather/Falling Trees
9
Overdemand
3
246
425
23
159
79
202
9
0
50
100
150
200
250
300
350
400
450
J
a
n
u
a
r
y
F
e
b
r
u
a
r
y
M
a
r
c
h
A
p
r
il
M
a
y
J
u
n
e
J
u
ly
A
u
g
u
s
t
S
e
p
t
e
m
b
e
r
O
c
t
o
b
e
r
N
o
v
e
m
b
e
r
D
e
c
e
m
b
e
r
2008
2009
2010
2011
2012
Note: Each power outage was grouped into one of seven possible causes. The outages by cause were totaled
and the results displayed in the chart above. The number adjacent to the pie piece is the number of outages
attributable to that cause.
Reported power outages by cause in 2012 Reported power outages by month/year
Note: Data collection began February 16, 2008.
THEY HAVE A CATEGORY FOR
ANIMALS? THAT' S HARSH.
38 EATON Eaton UPS and Power Management Fundamentals Handbook
Case study example one
Challenge:
A small college with multiple satellite
campuses is consolidating data centers to a
brand new facility. This site is a small
community branch with only single-phase
loads left in the data center and it supports
only small processes and equipment. It does
have generator backup, which works for
long-term outages, but the IT manager
wants 15 minutes of runtime. Although the
shutdown process takes six to seven
minutes, the IT manager prefers to have 15
minutes for peace of mind. The main IT
support and servers will be handled from
the main campus, but some of the backup
and support processes will be run from this
data center and need power protection.
Theres no need for scalability, as the load at
the various branches will most likely
decrease over the next several years. With
the move to the central data center, the
expectation is that over the next five years
almost all the IT equipment will be housed
at the main campus.
The IT manager provides a list of equipment
that shows the majority of the load needing
protection is telecom equipment. There are
three 120V telephony racks with an average
power draw of 1.5 kW each. There are two
208V racks of servers to handle the support
processes that average 2.5 kW each.
Operation and maintenance: With the
move to the main data center, the support
staff onsite will be minimal. The IT manager
wants a comprehensive support plan to
handle all service and maintenance.
Budget: The budget is a major
consideration, since the satellite campus IT
budgets have been reduced due to IT
equipment consolidation. The IT manager
expects to spend less than $20,000.
Management: The IT manager wants to
continue to manage the equipment over the
network but only minimal monitoring is
needed.
Power distribution: The facility has several
rackmount UPSs being fed from an
upstream distribution panel. Theres a
mixture of 5-20R and L6-30R receptacles
available on this distribution panel. The IT
manager prefers to continue using the
existing distribution panel without bringing
in an electrician to rewire the facility. Eaton
9130 UPSs are available with these options
in both tower and rackmount models. The IT
manager can separate racks based on 208V
or 120V, due to the limited equipment and
ample rack space from the consolidation.
Eaton's complete solution:
Customer equipment
1 Onsite generator
2 Distribution panel
3 Single-phase power
4 Three telephony racks with a total load of
4.5 kW (120V)
5 Two server racks with a total load of 5
kW (208V)
Eaton equipment
1 Three Eaton 9130 UPSs and three EBMs
provide 1.8 kW of power each and 40
minutes of battery runtime
UPS part number: PW9130L2000R-XL2U
EBM part number: PW9130N3000R-
EBM2U
2 Two Eaton 9130 UPSs and two EBMs
provide 2.7 kW of power each and 20
minutes of battery runtime
UPS part number: PW9130G3000R-XL2U
EBM part number: PW9130N3000R-
EBM2U
3 Six ePDU models, two in each rack for
the A and B feeds. Model ePBZ97 with
(24) 5-20R output receptacles
4 Four ePDU models, two in each rack for
the A and B feeds. Model ePBZ92 with
(20) C13 and (4) C19 output receptacles

5 Intelligent Power Software Suite (free
with UPS) for comprehensive monitoring
and shutdown capabilities
6 Recommended service contract: Flex
Onsite
Comprehensive coverage of UPS
and batteries
Telephone technical support
eNotify Remote Monitoring
Connectivity support
Expedited delivery of replacement
parts, modules and batteries
Onsite startup
Onsite corrective maintenance
Next-day 24-hour response
39 EATON Eaton UPS and Power Management Fundamentals Handbook
40 EATON Eaton UPS and Power Management Fundamentals Handbook
Case study example two
EATON GAVE OUR
DATA CENTER
NEW LIFE. WHAT
ABOUT ME?
Challenge:
A data center has 480 Vac three-phase
service with dual-mains, feeding an older
300 kVA UPS. There are two wall-mounted
panels being fed from the two utility
sources that feed the UPS (rectifier and
bypass input), which is feeding a
switchboard. The switchboard feeds two 150
kVA power distribution units (PDUs). Its a
three-phase environment for the main UPS
and single-phase UPSs within the racks.
The switchboard, fed by the UPS, is feeding
two 150 kVA PDUs; the PDUs are feeding
six rows of racks via cabling under the
12-foot raised floor. Each rack has metered
ePDU units for in-rack power distribution,
which are being fed from the PDU
distribution breakers and receptacle junction
boxes under the floor. With metered ePDUs
in each rack, this is a nice power distribution
scheme. The ePDUs are being fed through
receptacle boxes under the floor with
L6-30P input plugs for each rack. The IT
manager also says he has a mixture of C13
and C19 outputs on each ePDU.
One or more UPSs will replace the existing
300 kVA system and be installed in the
dedicated facility or power room behind the
wall. In total, the facility has 54 racks of IT
equipment (~1500 square feet) with a total
load of 214 kW, or 4 kW per rack.
The facility has a backup generator, that
suffices for long-term outages. Because he
has critical phone switches and other
telecom equipment, the IT manager wants
10 minutes of runtime to be safe, should he
face generator problems. Since he also has
two 150 kVA PDUs, the IT manager is
interested in the possibility of providing two
parallel UPSs for N+1 redundancy. With two
UPSs providing a total of 300 kVA or more,
only half the data center would be impacted
in a UPS or mains failure.
With regard to service, the IT manager
defers to the facility manager, who prefers
complete factory support. With the systems
backing up their critical data center, they
want to ensure each UPS is under a service
contract with ongoing preventive
maintenance.
Eaton's complete solution:
Customer equipment
1 480 Vac three-phase service
with dual-mains
2 Switchboard
3 Pair of 150 kVA PDUs
4 54 racks of IT equipment
(~1500 square feet)
5 Backup generator
Eaton equipment
1 Two Eaton 9390 UPS (160 kVA each)
providing 320 kVA of support or 288 kW
(34 percent extra capacity); includes
parallel configuration, Web card, side-car
tie cabinet and three-breaker MBS
(TD1622231129010)
2 Two external battery cabinets (432 Vdc)
providing 12 minutes of runtime
(TL1602E28211100)
3 54 monitored ePDU units with L6-30P
input, (24) C13s and (4) C19s
(PW105MIOU096)

4 Startup and one year of on-site service
included with all 9390 units.
5 Recommended PowerTrust service plan:
Parts and labor for electronics
24x7 onsite corrective maintenance
8-hour field technician response time
8x5 preventive maintenance
(1 per year)
Battery preventive maintenance
(1 per year)
eNotify Remote Monitoring service
Discounted spare parts and
upgrade kits
5 Intelligent Power Software Suite UPS
software (free with UPS) for
comprehensive monitoring and
shutdown capabilities
6 Future LAN drop to UPS for
communications and PowerXpert for
advanced monitoring and management
capabilities
41 EATON Eaton UPS and Power Management Fundamentals Handbook
1
4
2
3
3
2
4
5
6
5
1
42 EATON Eaton UPS and Power Management Fundamentals Handbook
A Ampere
AC Alternating Current
AFCI Arc Fault Circuit Interrupter
AH Ampere Hour
ANSI American National Standards
Institute
ASCII American Standard Code for
Information Interchange
AVR Automatic Voltage Regulation
BBM Break-Before-Make (Bypass
Switch)
BDM Bypass Distribution Module
BTU British Thermal Unit
CRAC Computer Room Air
Conditioning
CRAH Computer Room Air Handler
CSA Canadian Standards
Association
DC Direct Current
DCIE Data Center Infrastructure
Efficiency
EBC Extended Battery Cabinet
EBM Extended Battery Module
EMC Electromagnetic Compatibility
EMF Electromagnetic Force
EMI Electromagnetic Interference
FCC Federal Communications
Commission
GFCI Ground-Fault Circuit
Interrupter
GND Ground
HV High Voltage
HVAC Heating, Ventilating and
Air Conditioning
HW Hardwired
Hz Hertz
IEC International Electrotechnical
Commission (IEC)
IEEE Institute of Electrical And
Electronics Engineers
IGBT Insulated Gate Bi-polar
Transistor
ISO International Standards
Organization
ITIC Information Technology
Industry Council
kAIC Kiloampere Interrupting
Capacity
kVA Kilovolt ampere
LAN Local Area Network
LCD Liquid Crystal Display
LED Light-Emitting Diode
LV Low Voltage
MBB Make-Before-Break (bypass
switch)
MIB Management Information
Base
MOV Metal Oxide Varistor
MTBF Mean Time Between Failure
MTTR Mean Time To Repair
NEC National Electrical Code
NEMA National Electrical
Manufacturers Association
NIC Network Interface Card
PDM Power Distribution Module
PDU Power Distribution Unit
PE Protective Earth (also Physical
Education)
PF Power Factor
PFC Power Factor Correction
PoE Power over Ethernet
PPDM PowerPass Distribution
Module
PPE Personal Protective
Equipment
PUE Power Usage Effectiveness
REPO Remote Emergency Power
Off
RFI Radio Frequency Interference
RM Rackmount (also Rectifier
Magazine)
RMS Root Mean Square
RoHS Restriction of Hazardous
Substances
SCR Silicon-Controlled Rectifier
SLA Service Level Agreement
SNMP Simple Network Management
Protocol
SPD Surge Protection Device
THD Total Harmonic Distortion
TVSS Transient Voltage Surge
Suppressor
UL Underwriters Laboratory
UPS Uninterruptible Power System
(or Supply)
USB Universal Serial Bus
V Volt
VA Volt Ampere
Vac Volts Alternating Current
Vdc Volts Direct Current
VRLA Valve Regulated Lead Acid
W Watt
Eaton acronyms
ABM Advanced Battery
Management
AFC American Football Conference
AM Advanced Monitored (ePDU)
ARG Amphibious Ready Group
BA Basic (ePDU)
CSE Customer Service Engineer
EOSL End of Service Life
EMS Energy Management System
ESS Energy Saver System
ME Metered (ePDU)
MI Ethernet Monitored (ePDU)
NFC National Football Conference
PDR Power Distribution Rack
RMA Return Material Authorization
RPM Rack Power Module
ROO Remote On/Off
RPO Remote Power Off
RPP Remote Power Panel
SEAL Sea Air Land
SW Switched (ePDU)
T&M Time and Material
VMMS Variable Module Management
System
Commonly used acronyms
UPS and electrical acronyms
43 EATON Eaton UPS and Power Management Fundamentals Handbook
CI Converged Infrastructure
CPU Central Processing Unit
DCIM Data Center Infrastructure
Management
DISA Defense Information Systems
Agency
DNS Domain Name System
DR Disaster Recovery
DSL Digital Subscriber Line
DVV or Data, Voice, Video
DV2
E911 Enhanced 911
ELT Emergency Locator
Transmitter
EMEA Europe, Middle East, Africa
FMC Fixed/Mobile Convergence
FTP File Transfer Protocol
GUI Graphical User Interface
HDD Hard Disk Drive
HPC High-Performance Computer
HTML HyperText Markup Language
HTTP HyperText Transfer Protocol
MDF Main Distribution Frame
NNM Network Node Manager
IaaS Infrastructure as a Service
IDF Intermediate Distribution
Frame
IP Internet Protocol
ISP Internet Service Provider
KVM Keyboard, Video, Mouse
LEED Leadership in Energy and
Environmental Design
MSP Managed Service Platform
MTDC Multi-Tenant Data Center
M2MI Machine-to-Machine Interface
NAS Network Attached Storage
NIC Network Interface Card
NOC Network Operations Center
PABX Private Automatic Branch
Exchange
PaaS Platform as a Service
PBX Private Branch Exchange
PC Personal Computer
PHI Personal Health Information
PICNIC Problem in chair not in
computer
PMDC Portable Modular Data Center
POTS Plain Old Telephone System
PSAP Public Safety Answering Point
PSTN Public Switched Telephone
Network
P2V Physical to Virtual
RAM Random Access Memory
SasS Software as a Solution
SAN Storage Area Network
SATA Serial Advanced Technology
Attachment
SOA Service-Oriented Architecture
SQL Structured Query Language
SSL Secure Socket Layer
SVGA Super Video Graphics Array
TCP/IP Transmission Control Protocol/
Internet Protocol
TDM Time-division Multiplexing
UC Unified Communications
URL Uniform Resource Locator
VDI Virtual Desktop Infrastructure
VGA Video Graphics Array
VLAN Virtual LAN
VoIP Voice over Internet Protocol
VM Virtual Machine
VPN Virtual Private Network
WAN Wide Area Network
Other acronyms
WE' VE ADDED
SOME SIZZLE HERE!
44 EATON Eaton UPS and Power Management Fundamentals Handbook
Audible Noise
A measure of the noise emanating from a
device at audible frequencies.
Backup Time
The amount of time the battery in a UPS
is designed to support the load.
Balanced Load
(1) AC power system using more than
two wires, where the current and voltage
are of equal value in each energized
conductor. (2) Laundry with equal parts of
light and dark clothes.
Battery String
A group of batteries connected together
in a series.
Blackout
A zero-voltage condition lasting for more
than two cycles. Also known as a power
outage or failure.
British Thermal Unit (BTU)
Used to measure heat dissipation and is
the amount of energy required to raise
one pound of water one degree
Fahrenheit. One pound of water at 32F
requires the transfer of 144 BTUs to
freeze into solid ice.
Brown Field
An existing data centeroften with
limited possibilities for sustainable and
energy-efficient designs.
Brownout
A steady state of low voltage, but not
zero voltage. Brownouts often occur
during summer months when energy use
is high.
Canadian Standards Association (CSA)
An independent Canadian organization
that tests for public safety, similar to the
function of Underwriters Laboratories
(UL) in the U.S. As far as we know, it
doesnt set the rules for hockey.
Capacitor
An electronic component that can store
an electrical charge on conductive plates.
Charger
(1) An electronic component in a UPS that
provides regulated DC voltage to recharge
batteries. (2) An inferior mascot for an
inferior team in the AFC West.
Cloud Computing
(1) Internet- (cloud-) based development
and use of computer technology. This
new supplement, consumption and
delivery model for IT services typically
involves the provision of dynamically
scalable, and often virtualized, resources
as a service over the Internet. (2) Work
done while traveling on a plane.
Common Mode Noise
An undesirable voltage that appears
between the power conductors and
ground.
Commercial Power
The power supplied by local utility
companies which can vary drastically in
quality throughout the U.S. depending on
location, weather and other factors.
Communication Bay
Also known as an option slot, a UPS
feature that enables the addition of various
connectivity cards for Web, SNMP,
Modbus or serial connectivity interface
capabilities.
Eaton 9130 equipped with a communication bay.
Converter
A device that delivers DC power when
energized by a DC source. Its also a
section of a switching power supply that
performs the actual power conversion and
final rectification.
Crest Factor
Usually refers to current. Its the
mathematical relationship between RMS
and peak current. A normal resistive load
will have a crest factor of 1.4142, which is
the normal relationship between peak and
RMS current. A typical PC will have a
crest factor of 3. Unrelated to toothpaste.
Critical Equipment
Equipment such as computers,
communications systems or electronic
process controls, which must be
continuously available.
Delta Connection
A circuit formed by connecting three
electrical devices in series to form a
closed loop; most often used in three-
phase connections. If you fly Delta
Airlines, this most likely takes place in
Atlanta, Salt Lake City or Cincinnati.
Derating
A reduction of some operating
parameters to compensate for a change
in one or more other parameters. In
power systems, the output power rating
is generally reduced at elevated
temperatures.
Direct Current (DC)
An electric current in which the flow of
electrons is in one direction, such as
supplied by a battery.
DC Distribution (DCD)
A module in a DC power system that
distributes DC power to the loads. It also
provides protection for the load cables.
Glossary of power terms
In the following glossary, weve
attempted to capture the common terms
related to UPS and power distribution
products. If you look closely, you might
see us trying to have a little fun!
Advanced Battery Management
A three-stage charging technique that
automatically tests battery health.
Provides advance notification when
preventive maintenance is needed,
allowing ample time to hot-swap batteries
without ever having to shut down
connected equipment significantly
extending the life of your UPS's battery
(and, quite possibly, your contract).
Alternating Current (AC)
An electric current that reverses its
direction at regularly recurring intervals,
as opposed to direct current, which is
constant. Usually in a sine wave pattern,
for optimal transmission of energy.
Ampere (A or Amp)
The unit of measure for the rate of flow
of electricity, analogous to gallons per
minute. VA x 0.7 (power factor) = watts
Apparent Power
Applied voltage multiplied by current in an
AC circuit which doesnt take the power
factor into account. Unit is volt amperes
(VA).
Arc
Sparking that results when undesirable
current flows between two points of
differing potential due to leakage through
the intermediate insulation or a leakage
path due to contamination. In astronomy,
an arc is the part of a circle representing
the apparent course of a heavenly body.
45 EATON Eaton UPS and Power Management Fundamentals Handbook
Earth ground symbol
DC Power System
An AC to DC power supply with
integrated control and monitoring, and
standby batteries designed to supply
no-break DC power (usually 24V or 48V)
to telecommunications and IT network
equipment.
Double Conversion
A UPS design in which the primary power
path consists of a rectifier and inverter. It
isolates the output power from all input
anomalies such as low voltage surges and
frequency variations.
Downtime
The time during which a functional unit
cant be used because of a fault within it
or the environment.
Dry Contacts
Dry contact refers to a contact of a relay
which does not make or break a current.
Efficiency
The ratio of output to input power.
Generally measured at full-load and
nominal line conditions. If the power
efficiency of a device is 90 percent, you
get back 90 watts for every 100 you put
in, and the rest is mainly dissipated as
heat from the filtration process. To think
of it another way, this would be
equivalent to a bartender pouring off
about an ounce and a half of your beer
before handing you the remaining 14.5
ounces!
Electrical Line Noise
Radio frequency interference (RFI),
electromagnetic interference (EMI) and
other voltage or frequency disturbances.
Electromagnetic Interference (EMI)
Electrical interference that can cause
equipment to work improperly, EMI can
be separated into conducted EMI
(interference conducted through cables
out of the UPS) and radiated EMI
(interference conducted through the air).
Energy Saver System (ESS)
Innovative technology from Eaton that
enables select UPS models to operate at
99 percent efficiency without
compromising reliabilitynot to be
confused with inferior eco modes.
ePDU
A power distribution unit that mounts to
rack enclosures and distributes power to
connected devices via a wide variety of
output receptacles.
Federal Communications Commission
(FCC)
A U.S. federal regulating body whose new
EMI limitations are affecting the design
and production of digital electronics
systems and their related subassemblies.
Flooded Batteries
A form of battery where the plates are
completely immersed in a liquid
electrolyte.
Frequency
The number of complete cycles of AC
voltage that occur during one second
(Hz). In North America, electrical current
is supplied mainly at 60 Hz, or 60 cycles
per second.
Green Field
A new data center with many possibilities
for sustainable and energy-efficient
designs.
Ground
A conducting connection, whether
intentional or accidental, by which an
electric circuit or equipment is connected
to the earth, or to some conducting body
of relatively large extent that serves in its
place.
Harmonics
A sinusoidal component of an AC voltage
thats multiple of the fundamental
waveform frequency. Certain harmonic
patterns may cause equipment problems
Harmonic Distortion
Regularly appearing distortion of the sine
wave which is converted into a complex
waveform at a multiple of the
fundamental frequency.
Hertz (Hz)
A unit of frequency equal to one cycle per
second.
High Efficiency Mode
A mode of UPS operation that cuts
energy usage and operating costs.
High Voltage (HV)
In the context of UPS products, high
voltage is anything 200V: 200V, 208V,
220V, 230V, 240V, 250V, 480V and 600V.
High Voltage Spike
Rapid voltage peaks up to 6,000 volts.
Hot Swappable
The ability to change a module without
taking the critical load off the UPS. Also
see user replaceable.
The batteries on this Eaton 9130 UPS are hot
swappable.
Insulated Gate Bipolar Transistor (IGBT)
A three-terminal power semiconductor
device, noted for high efficiency and fast
switching. It switches electric power in
many modern appliances such as electric
cars, trains and UPSs.
Impedance
The total opposition to alternating current
flow in an electrical circuit.
Input Voltage Range
The voltage range within which a UPS
operates in normal mode and doesnt
require battery power.
Inrush Current
The maximum, instantaneous input
current drawn by an electrical device
when first turned on. Some electrical
devices draw several times their normal
full-load current when initially energized.
Inverter
UPS assembly that converts internal DC
power to output AC power to run the
users equipment. When the inverter is
supporting 100 percent of the load at all
times, as with an online UPS, there is no
break from utility to battery power.
Kilovolt Ampere (kVA)
A common measurement of equipment
capacity equaling 1000 volt-amperes. An
approximation of available power in an AC
system that does not take the power
factor into account.
Kinetic Energy
The energy an object possesses because
of its motion.
Line Conditioner
A device intended to improve the quality
of the power thats delivered to electrical
load equipment. A line conditioner is
generally designed to improve power
quality (e.g., proper voltage level, noise
suppression, transient impulse protection,
etc.).
Line Interactive
An offline UPS topology in which the
system interacts with the utility line to
regulate the power to the load. Provides
better protection than a standby system
but isnt as fully prepared against
irregularities as a full double-conversion
system, making it the "Goldilocks" of UPS
topologies.
Linear Load
AC electrical loads where the voltage and
current waveforms are sinusoidal. The
current at any time is proportional to
voltage.
Load
The equipment connected to and
protected by a UPS. Pretty rockin
Metallica album.
Load Segment
UPS configuration with separate
receptacle groups, enabling scheduled
shutdowns and maximum backup power
time for critical devices.
This Eaton 9130 UPS is equipped with two load
segments, each with three 5-15R
46 EATON Eaton UPS and Power Management Fundamentals Handbook
Low Voltage (LV)
In the context of UPS products, low
voltage is anything <200V (100V and
120V).
Maintenance Bypass
An external wiring path to which the load
can be transferred to upgrade or perform
service on the UPS without powering
down the load.
Make-Before-Break
Operational sequence of a switch or relay
where the new connection is made prior
to disconnecting the existing connection,
thats also know as soft-load-transfer
switching.
Modbus
A serial communications protocol thats
the most commonly available means of
connecting industrial electronic devices. It
allows for communication between many
devices connected to the same network.
Network Transient Protector
UPS feature that isolates networks,
modems and cables from power threats,
including surges and spikes.
Noise
(1) A disturbance that affects a signal; it
can distort the information carried by it.
(2) Random variations of one or more
characteristics of any entity, such as
voltage, current or data. (3) Loosely, any
disturbance tending to interfere with
normal operation of a device. (4) What
parents with children deal with every day.
Nominal Output Voltage
The intended, ideal voltage of any given
output.
Non-linear Load
AC electrical loads where the current is
not proportional to the voltage. Non-linear
loads often generate harmonics in the
current waveform that lead to distortion
of the voltage waveform.
Offline
Any UPS that doesnt fit the definition of
online. Line-interactive and standby
topologies are offline, as are minor
skirmishes that take place just outside
the boardroom.
Ohm
The unit of measurement for electrical
resistance or opposition to current flow.
Ohms Law
The voltage (E) is equal to the current (I)
times the resistance (R). The formula is
written: E=IR.
Online
(1) A UPS that provides power to the load
from its inverter 100 percent of the time,
regulating BOTH voltage and frequency,
usually using double-conversion topology.
(2) The most convenient way to shop,
bank, get news, etc.
Orderly Shutdown
The sequenced shutdown of units
comprising a computer system to prevent
damage to it and subsequent corruption
or loss of data.
Output Waveform (UPS)
The shape of the graph of alternating
current on the output side of a UPS. The
highest quality of an output waveform
from a UPS is the sine wave, but, some
UPSs provide step waves or modified
sine waves.

Sine Wave
Parallel Operation
The ability of UPSs to be connected
so the current from corresponding
outputs can be combined into a
single load.
Partition
A logical division of a hard disk created
to have different operating systems on
the same hard disk or to create the
appearance of having separate hard

drives for file management, multiple
users, or other purposes.
Peak Demand
The highest 15- or 30-minute demand
recorded during a 12-month period.
Phase
The time relationship between current
and voltage in AC circuits.
Plenum Cable
Cable thats laid in the plenum spaces of
buildings to facilitate air circulation for
heating and air conditioning systems. The
plenum space is typically used to house
computer and telephone network
communication cables. Cable that runs
between floors in non-plenum areas is
rated as riser cable.
Plug and Play
An electrical device that doesnt require
extensive setup to operate.
Power Factor (PF)
(1) The ratio of real power to apparent
power. Watts divided by VA. Most power
supplies used in communication and
computer equipment have a power factor
of 0.9.
(PF = 0.9)
VA x PF = W
W/PF = VA
(2) Why DeNiro can get immediate
seating in any restaurant he wants, and
you cant.
Power Sag
Low voltage (below nominal 120 volts).
Power Surge
High voltage (above nominal 120 volts).
Pulse Width Modulation (PWM)
A circuit used in switching regulated
power supplies where the switching
frequency is held constant and the width
of the power pulse is varied, controlling
both lines and load changes with minimal
dissipation.
Rackmount
Ability to mount an electrical assembly
into a standardized rack. Generally
stacked up to 42U and 19 inches wide
about the size of a pizza box but not
as greasy.
Rack Unit (U)
A unit of height measurement in a rack
enclosure. A U is equivalent to 1.75
inches.
The Eaton 5PX UPS occupies 2U of rack space and
the optional extended battery module also
occupies 2U.
Rail Kit
A set of metal brackets that allows the
installation of a UPS or extended battery
module in a 2- or 4-post rack.
Four-post rail kit



UPS in a two-post rack
Rectifier
A UPS component that converts incoming
AC power to DC power for feeding the
inverter and charging the battery.
Rectifier Magazine (RM)
A module in the DC power system used
to connect the rectifiers in the power
system.
Redundancy
The ability to connect units in parallel so if
one fails the other(s) will provide continual
power to the load. This mode
is used in systems when power failure
cant be tolerated.
Relay Communication
Communication between a UPS and
a computer through the opening and
closing of solid-state relays that are
pre-defined to indicate UPS status.
Root Mean Square (RMS)
A modified average. Averaging a sine
wave would give a zero, so to obtain
meaningful values, the wave is first
squared (S), then averaged over one
period (M) and finally the square root
taken (R). In a sine wave, the factor
between RMS and peak is the square
root of two. If you know what that
means, youre pretty smart!
90 180 270 360
90 180 270 360
47 EATON Eaton UPS and Power Management Fundamentals Handbook
RS-232
(1) The standard for serial interfaces (serial
refers to the eight bits of each character
successively sent down one wire) used
by most computers, modems and
printers. (2) A little known droid in the
Star Wars trilogy.
Simple Network Management Protocal
(SNMP)
A User Datagram Protocol (UDP)-based
network protocol. Its used mostly in
network management systems to
monitor network-attached devices for
conditions that warrant administrative
attention.
Sine Wave
A mathematical function that plots three
qualities of an electrical signal over time:
amplitude, frequency and phase. Clean,
uninterrupted power is represented by a
sine waves, which can also resemble
ocean waves, though they're rarely
perfect.
Single Phase
(1) Power system with one primary
waveform. Lower-capacity distribution of
power using only one portion of a power
source thats three-phase, like what's
supplied by most electric utilities. Used
for heating and lighting, no large motors
or other heavy-drain devices. (2) That part
of junior high school in which you briefly
but fiercely embrace an unusual hobby or
interest, like lawn bowling, never to return
to it.
Sliding Demand
Calculating average demand by averaging
demand over several successive time
intervals, advancing one interval at a time.
Split-phase UPS
A UPS with two output phases
referenced to a neutral connection with a
specific phase displacement between
phases, which allows flexibility in load
configuration while maintaining the
availability of bypass. A split-phase UPS
can provide 120V and 208V on the output
simultaneously without the use of an
external transformer. The capabilities for
output are:
Phase to neutral 100, 110, 120 or
127 Vac
Phase to phase 200, 208, 220, 230, 240
Vac
Standby
(1) UPS type that "stands by," waiting for
a power problem from the utility company
and rapidly switching to UPS battery
power to protect equipment against
power failures, sags and surges. (2) The
person you call after your hot date falls
through, and the two of you go out for
milkshakes in your sweatpants instead.
Static Switch
An electrical component in a UPS that
turns power flow on and off on command
without moving or mechanical
components.
Step Load
An instantaneous change in the loading
conditions presented to the output of
a UPS.
Switching Frequency
The rate at which the source voltage
is switched in a switching regulator
or chopped in a DC-to-DC converter.
Technischer Uberwachungs-Verein (TUV)
An independent non-profit organization
that tests and certifies electrical
equipment for public safety in the U.S.
and worldwide.
The Far Side
The greatest cartoon strip ever. Created
by Gary Larson.
Thermal Regulation
Monitoring the temperature of the
batteries to ensure proper charging.
Three Phase
(1) Power supplied through at least three
wires, each carrying power from a
common generator but offset in its cycle
from the other two. Used for heavy-duty
applications. (2) The universal healing
process after buying inferior power
protection:
1. Denial
2. Anger
3. Calling Eaton
Topology (UPS)
The core technology of a UPS. Typically, a
UPS is either standby, line interactive or
online though other hybrid technologies
have been introduced.
Total Harmonic Distortion (THD)
(1) How much the circuit voltage deviates
from a perfect sine wave. When viewed
on a meter, a poor voltage THD is most
often manifested in a flat-topped
waveform that comes from the inability of
a power source to respond to the
demands of highly nonlinear loads. (2) The
parts of a difficult lecture that didn't quite
make it into your brain, but rather united
in a "blahblahblah" cacophony of scratchy-
sounding jargon and esoteric corollaries.
Transfer Time
The length of time it takes a UPS to
transfer to battery power. Typically
measured in milliseconds (ms).
Transformer
(1) A magnetic device that converts AC
voltages to AC voltages at any level. An
ideal transformer is a lossless device in
which no energy is stored that requires
no magnetic current. (2) An alien robot
that can disguise itself by transforming
into everyday machinery.
Transient
(1) A temporary and brief change in a
given parameter, typically associated with
input voltage or output loading
parameters. (2) Transient killer whale pods
are generally comprised of an adult
female and two or three of her offspring.
Among the differences between residents
and transients are that while resident
orcas of both sexes stay within shouting
distance of their mothers their entire
lives, only first-born male transients
maintain such intense fidelity to their
mothers.
Unbalanced Load
(1) An AC power system using more than
two wires, where the current is not equal
due to an uneven loading of the phases.
(2) A load that makes your washing
machine go, whump, whump, whump.
Underwriters Laboratories (UL)
An independent non-profit organization
that tests for public safety in the U.S. UL
recognition is required for equipment
used in some applications.
Uninterruptible Power System (UPS)
(1) An electrical system designed to
provide instant, transient-free backup
power during power failure or fault. Some
UPSs also filter and/or regulate utility
power (line conditioning). (2) A Device
whose sole purpose is to save your
equipment, your data and your job.
User Replaceable
Capable of being replaced by an end user.
Connected equipment may need to be
shut down first. Also see hot
swappable.
Variable Module Management System
(VMMS)
Innovative technology from Eaton that
maximizes UPS efficiencies at low load
levels while supplying the load with
continuous double-conversion power.
Virtualization
The creation of a virtual (rather than
actual) version of something, such as an
operating system, server, storage device
or network resource. Operating system
virtualization is the use of software to
allow a piece of hardware to run multiple
operating system images at the same
time.
Volt/Voltage (V)
Electrical pressure that pushes current
through a circuit. High voltage in a
computer circuit is represented by 1,
while low (or zero) voltage is represented
by 0.
Volt Amps (VA)
(1) The voltage applied to a given piece of
equipment, multiplied by the current it
draws. Not to be confused with watts,
which are similar but represent the actual
power drawn by the equipment, and can
be somewhat lower than the VA rating.
(2) Legendary Brigadier General from
Planet Zap.
Watts (W)
The measure of real power. Its the rate of
doing electrical work. W x 1.3 = VA.
Wye Connection
A connection of three components made
in such a manner that one end of each
component is connected. Its generally
used to connect devices to a three-phase
power system.
Eaton is a registered trademark
of Eaton Corporation.
All other trademarks are property
of their respective owners.
Eaton
Electrical Sector
1111 Superior Avenue
Cleveland, OH 44114 USA
Eaton.com
2013 Eaton
All Rights Reserved
Printed in USA
COR172FYA
March 2013
For more information, please visit
powerquality.eaton.com