Scribd
Upload
50 views4 pages

Project Site Safety Inspection Checklist

The document is a jobsite inspection checklist used to evaluate safety conditions. It contains 27 categories related to site access, equipment, fall protection, emergency preparedness, and other safety issues. Inspectors use it to identify satisfactory, unsatisfactory, or non-applicable safety conditions requiring attention.

Uploaded by

Zaka Riyadi, ST
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
50 views4 pages

Project Site Safety Inspection Checklist

The document is a jobsite inspection checklist used to evaluate safety conditions. It contains 27 categories related to site access, equipment, fall protection, emergency preparedness, and other safety issues. Inspectors use it to identify satisfactory, unsatisfactory, or non-applicable safety conditions requiring attention.

Uploaded by

Zaka Riyadi, ST
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 4

Jobsite Inspection Checklist

Site/Contractor Name:

Date:

Location:

No of
Employees:

Conducted By:
S Satisfactory
Item Inspected

1.

SITE ACCESS

Clean, level ground


Adequate ramps
Adequate stairs
Adequate ladders
Other

2.

HOUSEKEEPING

Clear walkways
Clear work areas
Clear access and landing
Other

3.

PERSONAL PROTECTIVE EQUIPMENT

Head protection
Foot protection
Eye protection
Hearing protection
Respiratory protection
Fall protection (plan, rescue)
Other

4.

LADDERS

Secured
Proper angle (extension ladders)
Proper size and type
Safe, usable condition
Properly used
Proper Handrail and landings
Non-slip bases
Other

5.

SCAFFOLDS

Properly erected (all parts used)


Properly secured
Properly planked
Proper guardrails, toeboards
Proper access to platform
Acceptable loading
Other

6.

POWER TOOLS, EQUIPMENT

General condition
Proper guards, cords, PPE
Tagging as DEFECTIVE
Other

NS Not Satisfactory
S

NS

NA

NA Not Applicable
Requires Immediate Action

7.

STAIRWELLS & RAMPS

Proper filler blocks in metal stairs


Proper cleats on ramps
Adequate lighting in stairwells
Proper handrails or guardrails
Other

8.

TRAFFIC CONTROL

Trained traffic controllers


Properly located
Clean, regulation sign
Properly dressed (including vest)
Other

9.

PUBLIC WAY PROTECTION

Properly located (within 4.5 m)


Entrances clearly marked
Covered where required
Min. height, width requirement
Proper rail on street side
Proper lighting, where required
Other

10. FALL PROTECTION


CSA approved
Properly worn
Safe, usable condition
Unprotected openings and edges
Working from:

Ladders
Scaffolds
Swingstages

Other

11. GUARDRAILS, BARRICADES


Located where required
Properly constructed
Adequately secured
Other

12. GAS CYLINDERS


Properly located
Properly secured
Properly moved or lifted
Properly hooked up
Other

13. CONFINED SPACES


Proper access
Air testing before entry
Rescue equipment readily available
Safety harness, lifeline properly
anchored & used
Second person for rescue
Outgoing air monitored
Entry permit where required
Other

14. FIRST AID REQUIRMENTS

Adequate qualified first aiders on jobsite


First aid kits:

Adequate number
Adequate contents

Other

15. FIRE PROTECTION


Master emergency plan
Extinguishers where required
Fully charged
Adequately identified
Other

16. CRANES, HOISTS, ETC.


Safe setup of equipment
Maintenance log available
Competent operator
Condition of slings, hardware
Safety catches on all hooks
Proper use of tag lines
Proper lifting containers
Competent signaller
Other

17. WELDING
Rods & cylinders properly labeled
MSDSs readily available
Properly secured ground cables
Proper eye protection worn
Proper screens and exhaust
Gas cylinders upright and secured
Fire extinguisher readily available
Other

18. ELEVATING WORK PLATFORM


Worker training
Properly used
Safe, usable condition
Acceptable loading
Manufacturers operating manual
Other

19. TRENCHES & EXCAVATIONS


Properly sloped, where required
Excavated soil properly placed
Appropriate shoring used
Proper access to trench
Proper storage of materials in and above
Other

20. EXTENSION CORDS


Outdoor-type, rated over 300 volts
Condition of casing, ends, connections
GFCIs used where required
Other

21. TEMPORARY POWER SUPPLY


Properly identified
Overhead lines flagged & secured

Surface cables buried or protected


Other

22. MATERIALS STORAGE


Properly located
Safely piled, stacked, bundled
Properly moved or lifted
Properly labeled (WHMIS)
Other

23. FORMWORK
Guardrails and fall-arrest system
Design drawings kept on project
Inspection statement by engineer or
competent worker
Other

24. SUSPENDED SCAFFOLDS


Properly attached and capable of at least
4 times maximum load
Outrigger beam tied to fixed support with
adequate counterweight
All mechanical/electrical devices in good
working condition
Independent lifelines for each worker
(extend to ground)
Engineers drawing on site if required

25. SIGNS & PRINT MATERIAL


OH&S Act and regulations
WSIB Form 82 poster
MSDSs
Warning signs
Emergency phone list
Report forms
Other

26. WORKER EDUCATION


WHMIS training
Company safety policy & program
Injury reporting
Hazard reporting
OH&S Act and Regulations
Personal H&S responsibilities
Other

27. HYGIENE
Washroom facilities available
Cleanliness of facilities
Injury/hazard reporting
Personal responsibilities
Safety policies and procedures
Other

You might also like