Dual Element Transducers for Thickness Gages
ers are available in an assortment of frequencies, sizes, and temperature capabilities to provide an off-the-shelf solution to most
corrosion applications. Note: TP103 Certification is available at an
additional charge by request.
Olympus NDT offers a complete line of dual element and single
element transducers for use with its corrosion thickness gages.
Most of these transducers feature Automatic Probe Recognition for
maximum gage performance for each transducer. These transducD791
D793
D7908
D792/D794
D790-RL
D790
D795
D791-RM
D790-SL
D7226
MTD705
D798-LF
D7906-SM
D790-SM
D799
D798
D797-SM
M2017
M2091
Gage Dual Transducers
Transducer
Part Number
28
Frequency
Tip Diameter
Connector
Type
Connector
Location
Range in Steel
Temperature Range
Wand
Holder
(w/wand)
MHz
inches
mm
inches
mm
D790
5.0
0.434
11
Potted
Straight
0.040 - 20
1.0 - 508
-5 to 932
-20 to 500
F152
F152A
D790-SM
5.0
0.434
11
Microdot
Straight
0.040 - 20
1.0 - 508
-5 to 932
-20 to 500
F152
F152A
D790-SL
5.0
0.434
11
LEMO 00
Straight
0.040 - 20
1.0 - 508
-5 to 932
-20 to 500
F152
F152A
D790-RL
5.0
0.434
11
LEMO 00
Rt Angle
0.040 - 20
1.0 - 508
-5 to 932
-20 to 500
D791
5.0
0.434
11
Potted
Rt Angle
0.040 - 20
1.0 - 508
-5 to 932
-20 to 500
F153
D791-RM
5.0
0.434
11
Microdot
Rt Angle
0.040 - 20
1.0 - 508
-5 to 752
-20 to 400
D792
10
0.283
7.2
Potted
Straight
0.020 - 1
0.5 - 25
32 to 122
0 to 50
F150
F150A
D793
10
0.283
7.2
Potted
Rt Angle
0.020 - 1
0.5 - 25
32 to 122
0 to 50
F151
D794
5.0
0.283
7.2
Potted
Straight
0.030 - 2
0.75 - 50
32 to 122
0 to 50
F150
F150A
D795
5.0
0.283
7.2
Potted
Rt Angle
0.030 - 2
0.75 - 50
32 to 122
0 to 50
F151
D797
2.0
0.900
22.9
Potted
Rt Angle
0.150 - 25
3.8 - 635
-5 to 752
-20 to 400
D797-SM
2.0
0.900
22.9
Microdot
Straight
0.150 - 25
3.8 - 635
-5 to 752
-20 to 400
D7226
7.5
0.350
8.9
Potted
Rt Angle
0.028 - 4
0.71 - 100
-5 to 300
-20 to 150
D798-LF
7.5
0.350
8.9
Potted
Rt Angle
0.028 - 4
0.71 - 100
-5 to 300
-20 to 150
D798
7.5
0.283
7.2
Potted
Rt Angle
0.028 - 4
0.71 - 100
-5 to 300
-20 to 150
D798-SM
7.5
0.283
7.2
Microdot
Straight
0.028 - 4
0.71 - 100
-5 to 300
-20 to 150
D799
5.0
0.434
11
Potted
Rt Angle
0.040 - 20
1.0 - 508
-5 to 300
-20 to 150
MTD705
5.0
0.200
5.1
Lepra/Con
Rt Angle
0.040 - 0.75
1.0 - 19
32 to 122
0 to 50
Other Thickness Gage Transducers
For use with 37DL PLUS and 38DL PLUS
Transducer
Part
Number
Tip
Diameter
Frequency
MHz
V260-SM
15
inches
Transducer
Type
Connector
Type
Connector
Location
Range in Steel
mm
0.080
Sonopen
Microdot
Straight
Temperature Range
inches
mm
0.02 - 0.400
0.5 - 10
32 to 122
0 to 50
Holder
SLH-V260SM
V260-RM
15
0.080
Sonopen
Microdot
Right Angle
0.02 - 0.400
0.5 - 10
32 to 122
0 to 50
V260-45
15
0.080
Sonopen
Microdot
45 Handle
0.02 - 0.400
0.5 - 10
32 to 122
0 to 50
D7906-SM*
5.0
0.434
11
Thru-Coat Dual
Microdot
Straight
0.040 - 2.0
1.0 - 50
32 to 122
0 to 50
F152 / F152A
D7906-RM*
5.0
0.434
11
Thru-Coat Dual
Microdot
Right Angle
0.040 - 2.0
1.0 - 50
32 to 122
0 to 50
F152 / F152A
D7908*
7.5
0.283
7.2
Thru-Coat Dual
Potted
Potted
0.040 - 1.5
0.71 - 37
32 to 122
0 to 50
Steel:
0.020 - 0.50
Steel:
0.5 - 12
Oxide:
0.010 - 0.050
Oxide:
0.25 - 1.25
32 to 122
0 to 50
2127
Steel:
0.020 - 0.50
Steel:
0.5 - 12
Oxide:
0.006 - 0.050
Oxide:
0.150 - 1.25
32 to 122
0 to 50
2127
0.080 - 5
2.0 - 125
32 to 176
0 to 80
M2017
20
0.250
6.35
Internal Oxide
Scale
Replaceable
Delay Line
Shear Wave
Microdot
Right Angle
EMAT
BNC
Straight
M2091
20
0.250
6.35
E110-SB
1.25
28.5
* Compatible with MG2-XT and MG2-DL
Microdot
Right Angle
Adaptor required for E110 (part number 1/2XA/E110).
Electromagnetic Acoustic Transducer (EMAT)
Electromagnetic Acoustic Transducers are single element transducers that employ a magnetostrictive
effect to transmit and receive ultrasonic waves. Part number E110-SB.
Advantages
No need to remove external scale
No couplant required
Use in contact with or at a small distance from surface
Applications
External oxide scaled surfaces
Use with 37DL PLUS** or 38DL PLUS** thickness gages, EPOCH LT**, EPOCH 4 PLUS,
EPOCH XT, EPOCH LTC, EPOCH 600 or EPOCH 1000 flaw detectors
*Temperature specification are 32 F to 140 F (0 C to 60 C) for continuous contact and 176 F (80 C) for intermittent contact, defined as 10 seconds in contact with part and 60 seconds of cooling time.
**Adaptor required. Please order separately. Part number 1/2XA/E110
Gage Dual Cables
Cable Part Number
For Use With
Length
feet
Cable Type
Plug Type
LCMD-316-5B
D790-SM
5.0
1.5
Standard
Straight
RLCMD-316-5B
D790-SM
5.0
1.5
Standard
Rt Angle
LCMD-178-5B SSA
D790-SM
5.0
1.5
Armored
Straight
RLCMD-178-5B SSA
D790-SM
5.0
1.5
Armored
Rt Angle
LCLD-316-5G
D790-RL
5.0
1.5
Standard
Straight
LCLD-316-5H
D790-SL
5.0
1.5
Standard
Straight
LCMD-316-5C
D791-RM
5.0
1.5
Standard
Straight
LCMD-316-5D
D797-SM
5.0
1.5
Standard
Straight
LCMD-316-5J
D798-SM
5.0
1.5
Standard
Straight
Straight
LCMD-316-5L
D7906-SM
5.0
1.5
Standard
LCMD-316-5N
D7906-RM
5.0
1.5
Standard
Straight
LCLPD-78-5
MTD705
5.0
1.5
Standard
Straight
LCM-74-4
V260-SM, V260-RM,
V260-45, M2017
4.0
1.2
Standard
LCM-188-4 SSA
V260-SM, V260-RM,
V260-45, M2017
4.0
1.2
Armored
LCB-74-4
E110-SB
4.0
1.2
Standard
www.olympus-ims.com
Right Angle
Straight
meters
The above picture illustrates the Panametrics
RLCMD (Right Angle) and LCMD (Straight) probe
recognition plugs that are compatible only with
Panametrics brand thickness gages. The Probe
Recognition technology automatically notifies
the gage of the frequency and probe type being
used. No information needs to be entered by the
inspector.
29
