Scribd
Upload
896 views

Packet Tracer - Lab 3 - VLAN and VTP Configuration - Packet Tracer 5.3

1. The document describes a Packet Tracer lab to configure VLANs and VTP on a network of four switches. 2. The objectives are to configure one switch as a VTP server, the others as clients, set the VTP domain and password, and create VLANs 10 and 50 that are propagated to all switches. 3. Successful completion is verified by using show commands to check the VTP configuration and that VLANs 10 and 50 are present on all switches.

Uploaded by

Adewale Raji
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
896 views

Packet Tracer - Lab 3 - VLAN and VTP Configuration - Packet Tracer 5.3

1. The document describes a Packet Tracer lab to configure VLANs and VTP on a network of four switches. 2. The objectives are to configure one switch as a VTP server, the others as clients, set the VTP domain and password, and create VLANs 10 and 50 that are propagated to all switches. 3. Successful completion is verified by using show commands to check the VTP configuration and that VLANs 10 and 50 are present on all switches.

Uploaded by

Adewale Raji
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Packet Tracer - Lab 3 - VLAN and VTP configuration - Packet Tracer 5.

1 of 2

http://www.packettracernetwork.com/packettracer53labs/lab3-vlanvtpcon...

The aim of this lab is to check your ability to configure VTP and VLAN on a small network of four switches. This lab will help you to prepare your ICND1 exam.
1.Configure the VTP-SERVER switch as a VTP server
2.Connect to the 3 other switches and configure them as VTP clients.
All links between swiches must be configured as trunk lines.
3.Configure VTP domain name as "TESTDOMAIN" and VTP password as "cisco"
4.Configure VLAN 10 with name "STUDENTS" and VLAN 50 with name "SERVERS"
5. Check propagation on all switches of the VTP domain.

Configure the VTP-SERVER switch as a VTP server


VTP-SERVER(config)#vtp mode server
Verify the VTP configuration using the "show vtp status command"
VTP-SERVER#show vtp status
VTP Version

:2

Configuration Revision

:4

Maximum VLANs supported locally : 255


Number of existing VLANs

:7

VTP Operating Mode

: Server

VTP Domain Name

: TESTDOMAIN

VTP Pruning Mode

: Disabled

VTP V2 Mode

: Disabled

VTP Traps Generation


MD5 digest

: Disabled
: 0xAE 0x4F 0x3F 0xC5 0xD3 0x41 0x9C 0x11

Configuration last modified by 192.168.1.1 at 3-1-93 00:27:41


Local updater ID is 192.168.1.1 on interface Vl1 (lowest numbered VLAN interface found)

Connect to the 3 other switches and configure them as VTP clients.


All links between swiches must be configured as trunk lines.
VTP-CLIENT3(config)#vtp mode client
Verify the VTP configuration using the "show vtp status command"
VTP-CLIENT3#sh vtp status
VTP Version

:2

Configuration Revision

:4

Maximum VLANs supported locally : 255


Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode

:7
: Client
: TESTDOMAIN
: Disabled

06-Oct-14 11:33 PM

Packet Tracer - Lab 3 - VLAN and VTP configuration - Packet Tracer 5.3

2 of 2

VTP V2 Mode

: Disabled

VTP Traps Generation


MD5 digest

http://www.packettracernetwork.com/packettracer53labs/lab3-vlanvtpcon...

: Disabled
: 0xAE 0x4F 0x3F 0xC5 0xD3 0x41 0x9C 0x11

Configuration last modified by 192.168.1.1 at 3-1-93 00:27:41

Configure VTP domain name as "TESTDOMAIN" and VTP password as "cisco"


1. Configure each link between switches as a trunk line
interface GigabitEthernet1/1
switchport mode trunk
interface GigabitEthernet1/2
switchport mode trunk

2.On the server :


VTP-SERVER(config)#vtp domain TESTDOMAIN
VTP-SERVER(config)#vtp password cisco

3.On each client :


VTP-CLIENT1(config)#vtp password cisco
VTP-CLIENT1(config)#vtp domain TESTDOMAIN

Configure VLAN 10 with name "STUDENTS" and VLAN 50 with name "SERVERS"
On the VTP server switch, configure the following commands
VTP-SERVER(config)#vlan 10
VTP-SERVER(config-vlan)#name STUDENTS
VTP-SERVER(config)#vlan 50
VTP-SERVER(config-vlan)#name SERVERS

Check propagation on all switches of the VTP domain.


Use the "show vlan brief" on each switch to check propagation of the 2 VLANS.
VTP-SERVER#show vlan brief
VLAN Name

Status

Ports

---- -------------------------------- --------- ------------------------------1

default

10 STUDENTS
50 SERVERS
1002 fddi-default
1003 token-ring-default
1004 fddinet-default
1005 trnet-default

active

Fa0/1, Fa0/2, Fa0/3, Fa0/4, [...]

active
active
active
active
active
active

Trademark notice: This web site and/or material is not affiliated with, endorsed by, or sponsored by Cisco Systems, Inc. Cisco

TM

, Cisco Systems

TM

, Cisco IOS

TM

TM
TM
TM
TM
, CCNA
, CCNP
, Networking Academy
, Linksys
are

registered trademark s of Cisco Systems, Inc. or its affiliates in the U.S. or certain other countries.

Free Download Books Pdf


readingfanatic.com
Choose From 1 Million Free Titles Download Now for Free eBooks!

Cisco 3750 in Nigeria


ng.chertcomputers.com
Cisco Catalyst 3750 Series switche From N500k, 2-3 days delivery

Download Zip
eliteunzip.com
Zip & Unzip Major File Formats Safely & Easily - Download Now!

06-Oct-14 11:33 PM

You might also like