Scribd
Upload
336 views

USB Device VCOM Drivers Installing Guide

The document provides instructions for installing Posiflex USB Printer VCOM drivers under Windows XP and Windows 7 32-bit. The steps include changing DIP switch settings to enable VCOM mode, connecting the printer to a USB port, selecting to install drivers from a specific location, browsing to the driver files, and checking device manager to confirm installation of a new COM port. Uninstalling the drivers involves removing the virtual COM port in device manager.

Uploaded by

flvh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
336 views

USB Device VCOM Drivers Installing Guide

The document provides instructions for installing Posiflex USB Printer VCOM drivers under Windows XP and Windows 7 32-bit. The steps include changing DIP switch settings to enable VCOM mode, connecting the printer to a USB port, selecting to install drivers from a specific location, browsing to the driver files, and checking device manager to confirm installation of a new COM port. Uninstalling the drivers involves removing the virtual COM port in device manager.

Uploaded by

flvh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Posiflex USB Printer VCOM Driver Installing Guide

Introduction
The purpose of this application note is to provide users of USB chips with a simple
procedure for installing PP9000U/PP8800U device drivers for their devices under
Windows XP and Win7 32bit.
1. Please change the pin 1 and pin 2 of DIP Switch1 to ON.
2. Turn on the USB Printer then the printer will change the USB class from USB
Printer class to USB CDC class. (VCOM Mode)
3. Now, you can continue the installing steps below.

Installing Drivers
To install USB Printer drivers under Windows 2000/WinXP/Win7 for 32-bit base,
follow the instructions below:
If a device of the same type has been installed on your machine before and the
drivers that are about to be installed are different from those installed already,
the original drivers need to be uninstalled. Please refer to the uninstall document
for further details of this procedure.

Page 1

Updated date: 2012/02/10

Installing Drivers under WinXP


The steps below are the examples for PP9000U.
Connect the device to a spare USB port on your PC. Select No, not this time
from the options available and then click Next to proceed with the
installation.

Page 2

Updated date: 2012/02/10

Select "Install from a list or specific location (Advanced)" as shown below and
then click Next .

Select "Search for the best driver in these locations" and enter the file path in
the combo-box ("E:\Drivers\ USBPP_VCOM_v510\USBPP_WinXP" in the
example below) or browse to it by clicking the browse button. Once the file
path has been entered in the box, click Next to proceed.

Page 3

Updated date: 2012/02/10

If Windows XP is configured to warn when unsigned (non-WHQL certified) drivers


are about to be installed, the following screen will be displayed unless installing a
Microsoft WHQL certified driver. Click on Continue Anyway to continue with
the installation. If Windows XP is configured to ignore file signature warnings, no
message will appear.

Page 4

Updated date: 2012/02/10

Windows should then display a message indicating that the installation was
successful. Click Finish to complete the installation for the first port of the
device.

Page 5

Updated date: 2012/02/10

Open the Device Manager (located in "Control Panel\System" then select the
"Hardware" tab and click "Device Manger") and select "Ports (COM & LPT)", the
device appears an additional COM port with the label "Posiflex PP9000U USB
Printer(COM6)".

This driver is to allocate a COM port using information derived from the cable's
physical location on USB port. If the other cables are always plugged into the
same USB port, then they will appear to the system as the same COM port.
Limitations
Although this driver can be used to control the number of COM ports created in
the system, it cannot prevent the installation of a new USB device for every
unique device that is plugged in.

Page 6

Updated date: 2012/02/10

Installing Drivers under Win7 32bit


The steps below are the examples for PP9000U.
Right click Computer and select Property to view the Device Manager
whether display unknown device of not when you connect the USB Printer to
USB port on your PC.
Right click on this unknown device and select Update Driver Software to
continue driver installation.

Page 7

Updated date: 2012/02/10

Click on Browse my computer for driver software.

Page 8

Updated date: 2012/02/10

Click Browse to search for driver software.

Page 9

Updated date: 2012/02/10

Click on "Install" to continue with the installation.

Page 10

Updated date: 2012/02/10

Windows should then display a message indicating that the installation was
successful. Click "Finish" to complete the installation for the first port of the
device.

Page 11

Updated date: 2012/02/10

Open the Device Manager (located in "Control Panel\System" then select the
"Hardware" tab and click "Device Manger") and select "Ports (COM & LPT)",
the device appears an additional COM port with the label "Posiflex PP9000U
USB Printer(COM7)".

Page 12

Updated date: 2012/02/10

Uninstalling Drivers
To uninstall USB Printer drivers, follow the instructions below:
Please connect the USB Printer device to PC.
Open the Device Manager (located in "Control Panel\System" then select the
"Hardware" tab and click "Device Manger") and select "Ports (COM & LPT)".
Then right-click on the virtual COM port of USB Printer and select "Uninstall"
from the menu.
Please tab Yes to confirm to remove USB Printer device.

Page 13

Updated date: 2012/02/10

Advanced drivers options


An advanced properties page is available for devices using this driver. To access
the advanced properties page in Windows 2000 or Windows XP or Windows 7, go
to "Control Panel -> System" then select the "Hardware" tab and click "Device
Manager". Find the USB serial port you want to change the properties of and
right-click on it. Select "Properties" from the menu then select the "Port Settings"
tab and click Advanced button to get the window below.
This page allows configuration of the basic device COM Port Number. To access
more advanced settings, click on the "Advanced" button to display the
advanced properties page (shown below).
This page will allow COM port number to be altered:
<WinXP>

<Win7>

Page 14

Updated date: 2012/02/10

You might also like