Scribd
Upload
841 views

Stacked Ring Segmented Turning

This document provides an overview of the process for stacked ring segmented turning. It recommends starting with books, videos, and the segmented woodturners website to learn techniques. The process involves designing the form, selecting wood colors, cutting wood segments, gluing them into rings, stacking the rings and gluing them together, and finally turning the assembled piece on the lathe. Key steps include ensuring accurate cuts, proper glue up and clamping of rings, turning rings to the same diameter, and dry fitting rings before final assembly.

Uploaded by

Anonymous p2cFoXbjD
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
841 views

Stacked Ring Segmented Turning

This document provides an overview of the process for stacked ring segmented turning. It recommends starting with books, videos, and the segmented woodturners website to learn techniques. The process involves designing the form, selecting wood colors, cutting wood segments, gluing them into rings, stacking the rings and gluing them together, and finally turning the assembled piece on the lathe. Key steps include ensuring accurate cuts, proper glue up and clamping of rings, turning rings to the same diameter, and dry fitting rings before final assembly.

Uploaded by

Anonymous p2cFoXbjD
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 47

Stacked Ring Segmented Turning

Freedom is Never Free - by Curt Theobald

Al Miotke
[email protected]

Where do you start?...


Not with this!

Or This!!

Galactic Journey - by Malcolm Tibbetts

Deception on the Cocobolo by Malcolm Tibbets

Start with a good book or Video


1. Woodturning with Ray Allen

By Dale Nish

2. The Art of Segmented Woodturning

By Malcolm Tibbetts

3. 3 DVD set Malcolm Tibbetts

Volume 1 is a great way to start


Available only at www.tahoeturner.com

4. Check out the website for the segmenting chapter of


the AAW.

www.segmentedwoodturners.org

Then Practice with a Bowl

Reasons to try segmented turning?

Create interesting and complex color patterns


using natural color woods
More affordable use of exotics
No hollowing
Forms that are not easy to accomplish from
single piece of wood
No end grain tear-out

Reasons you might avoid Segmenting?

Projects are not a Saturday afternoon job.


Cant use found wood (Easily)
Lots of time away from the lathe
Requires a little bit of math and planning
You might need a few more tools (But is that
really a problem!)

Disk Sander
Chop Saw
Table Saw

Design Considerations
Form
Color
Grain Alignment
Feature Ring design

Start with a good plan

Wood Color
Lots of Options - here are Just a few possibilities
Wood

Color

Characteristic

White Maple

Off White

Nice color but not as bright as Holly- Grain


visible. More cost effective

Holly

Pure White

In demand by segmenters, No grain, Harder to


find

Padauk

Bright Red

BEWARE - Very attractive when freshly cut


but darkens to a deep red then brown in
months when exposed to light

Bloodwood

Deep Red

Maintains color much better then Padauk

Wenge

Very Dark Brown

Excellent for deep Brown Color

Yellowheart

Yellow

Good color stability

Purpleheart

Bright purple

Turns to a deep color

Walnut

Brown

Lower cost

Gabon Ebony

Black

Beautiful wood if you can afford it.

Nice Design .. But!

Stress Lines

This is what could Happen

From Curt Theobald website

Designs dont need to be complex to


be elegant

Photos from Segmented woodturners website

The Process
An overview

Make sure all tools are at 90.0

Dimension the Lumber

Cut the Segments

Table Saws are also popular


but you need a good sled

A good Sled design


Compliments of Malcolm Tibbetts
Posted on website: segmentedwoodturners.org

Sand the Segments

Start Gluing!
What is the Best Glue?

PVA Glue

Titebond Original is the most common choice


Provides high bonding strength
Some flexibility when cured.
Easy water based clean-up

Clamping styles

Half Rings and Full Rings

Gluing larger half rings

Gluing the full ring

Make sure each half ring is 180.0

Make sure the bottom is flat

Sand the rings

One way to sand completed rings


without a drum sander

Stack the rings and glue


You dont need a fancy press!

Finally, Start Turning

The Assembly Process

The construction form

Assemble all the


rings needed

Sand the Rings

Turn each ring to the same diameter 2.15

All the rings turned and sanded

Drill rings to wall thickness

Cut the rings in half

Rings split to 3/8 thickness

Rings arranged in
the correct order
for final assembly

Angle the rings

Angle jigs

Fit each ring


Tape to hold in place

All the rings in place

Start Clamping

More clamping

The final Dry Fit

After lots of sanding

You might also like