Scribd
Upload
120 views

Tcpdump Usage Examples

This document provides examples of how to use the tcpdump command to capture and analyze network packets in different ways. Some key usages include capturing packets to a file, limiting the number of packets captured, filtering captures by IP addresses or ports, and adjusting the level of verbosity or amount of packet data displayed. Running tcpdump typically requires root privileges while Wireshark can then be used by a regular user to analyze captured packet files.

Uploaded by

downloadposta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
120 views

Tcpdump Usage Examples

This document provides examples of how to use the tcpdump command to capture and analyze network packets in different ways. Some key usages include capturing packets to a file, limiting the number of packets captured, filtering captures by IP addresses or ports, and adjusting the level of verbosity or amount of packet data displayed. Running tcpdump typically requires root privileges while Wireshark can then be used by a regular user to analyze captured packet files.

Uploaded by

downloadposta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Tcpdump usage examples

In most cases you will need root permission to be able to capture packets on an interface. Using tcpdump (with
root) to capture the packets and saving them to a file to analyze with Wireshark (using a regular account) is
recommended over using Wireshark with a root account to capture packets on an "untrusted" interface. See
theWireshark security advisories for reasons why. See the list of interfaces on which tcpdump can listen:
tcpdump -D
Listen on interface eth0:
tcpdump -i eth0
Listen on any available interface (cannot be done in promiscuous mode. Requires Linux kernel 2.2 or greater):
tcpdump -i any
Be verbose while capturing packets:
tcpdump -v
Be more verbose while capturing packets:
tcpdump -vv
Be very verbose while capturing packets:
tcpdump -vvv
Be less verbose (than the default) while capturing packets:
tcpdump -q
Limit the capture to 100 packets:
tcpdump -c 100
Record the packet capture to a file called capture.cap:
tcpdump -w capture.cap
Record the packet capture to a file called capture.cap but display on-screen how many packets have been
captured in real-time:
tcpdump -v -w capture.cap
Display the packets of a file called capture.cap:
tcpdump -r capture.cap
Display the packets using maximum detail of a file called capture.cap:
tcpdump -vvv -r capture.cap
Display IP addresses and port numbers instead of domain and service names when capturing packets:
tcpdump -n
Capture any packets where the destination host is 192.168.1.1. Display IP addresses and port numbers:
tcpdump -n dst host 192.168.1.1
Capture any packets where the source host is 192.168.1.1. Display IP addresses and port numbers:
tcpdump -n src host 192.168.1.1
Capture any packets where the source or destination host is 192.168.1.1. Display IP addresses and port numbers:
tcpdump -n host 192.168.1.1
Capture any packets where the destination network is 192.168.1.0/24. Display IP addresses and port numbers:
tcpdump -n dst net 192.168.1.0/24
Capture any packets where the source network is 192.168.1.0/24. Display IP addresses and port numbers:
tcpdump -n src net 192.168.1.0/24
Capture any packets where the source or destination network is 192.168.1.0/24. Display IP addresses and port
numbers:
tcpdump -n net 192.168.1.0/24
Capture any packets where the destination port is 23. Display IP addresses and port numbers:

tcpdump -n dst port 23


Capture any packets where the destination port is is between 1 and 1023 inclusive. Display IP addresses and port
numbers:
tcpdump -n dst portrange 1-1023
Capture only TCP packets where the destination port is is between 1 and 1023 inclusive. Display IP addresses and
port numbers:
tcpdump -n tcp dst portrange 1-1023
Capture only UDP packets where the destination port is is between 1 and 1023 inclusive. Display IP addresses and
port numbers:
tcpdump -n udp dst portrange 1-1023
Capture any packets with destination IP 192.168.1.1 and destination port 23. Display IP addresses and port
numbers:
tcpdump -n "dst host 192.168.1.1 and dst port 23"
Capture any packets with destination IP 192.168.1.1 and destination port 80 or 443. Display IP addresses and port
numbers:
tcpdump -n "dst host 192.168.1.1 and (dst port 80 or dst port 443)"
Capture any ICMP packets:
tcpdump -v icmp
Capture any ARP packets:
tcpdump -v arp
Capture either ICMP or ARP packets:
tcpdump -v "icmp or arp"
Capture any packets that are broadcast or multicast:
tcpdump -n "broadcast or multicast"
Capture 500 bytes of data for each packet rather than the default of 68 bytes:
tcpdump -s 500
Capture all bytes of data within the packet:
tcpdump -s 0

You might also like