Scribd
Upload
67 views4 pages

Determining The Type of Channel Morphology

This document describes how to determine the type of channel morphology using field measurements, a nomogram, and reference figures. There are seven channel types that are determined by calculating the relative width and roughness from measurements and transferring those values on the nomogram. The point of intersection on the nomogram indicates the morphology type and whether large woody debris is expected to be present and functioning. Examples are provided to illustrate how to use the nomogram and figures to classify channel morphology and assess the role of large woody debris.

Uploaded by

Costinel Cristescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
67 views4 pages

Determining The Type of Channel Morphology

This document describes how to determine the type of channel morphology using field measurements, a nomogram, and reference figures. There are seven channel types that are determined by calculating the relative width and roughness from measurements and transferring those values on the nomogram. The point of intersection on the nomogram indicates the morphology type and whether large woody debris is expected to be present and functioning. Examples are provided to illustrate how to use the nomogram and figures to classify channel morphology and assess the role of large woody debris.

Uploaded by

Costinel Cristescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

Determining the type of channel morphology

The seven channel types used in the CAP are summarized in Table 2. The type of morphology is
determined by using the field measures, nomogram (Figure 5), and by referring to Figure 6. First,
the relative width is calculated by entering the measured values of D and Wb on Graph 1 of
Figure 5. Second, the relative roughness is determined by entering the measured values of D and
d on Graph 2. Third, the respective D/Wb and D/d values are transferred onto Graph 3, which
calculates their product. Finally, the product of D/Wb and D/d is transferred onto Graph 4, with
the intersection of this value and s giving the type of channel morphology. If the point of
intersection between s and (D/Wb)(D/d) does not lie on the diagonal line, follow the shortest line
distance back to the shaded band.
Table 2. Channel types and associated characteristics

Code

Morphology

Sub-code

Bed material

RP
RP
CP
CP
SP

riffle-pool
riffle-pool
cascade-pool
cascade-pool
step-pool

RPg-w
RPc-w
CPc-w
CPb
SPb-w

gravel
cobble
cobble
boulder
boulder

SP
SP

step-pool
step-pool

SPb
SPr

LWD

functioning
functioning
present, minor function
absent
present, minimal
function
boulder
absent
boulder-block
absent

Figure 5. Nomogram used to determine channel morphology.


Figure 6. Channel morphologies of small- and intermediate-sized channels.
As an example of the use of Figure 5, use:
D
d
Wb
s

=
=
=
=

10 cm
120 cm
20 m
1.5%

Following the lines in the nomogram produces a riffle-pool morphology with predominately
gravel-textured materials (RPg). Large woody debris (LWD) is important in these channel types
(see Figure 7).
Figure 7. Determining the influence of LWD on channel morphology.

If either the CP or SP morphologies are determined from Figure 5, it is necessary to determine if


LWD is expected in the particular channel. The importance of LWD to channel functions depends
on the width of the channel (also stream power, but this is considered implicitly in Figure 5). The
functional role of LWD is given in Figure 7. For instance, if a channel is determined to be
cascade-pool morphology, from Figure 7 it is apparent that when the channel is less than 30 m
wide, LWD should be present. When the channel is wider than 30 m, LWD is present but not
functioning. (Note that since LWD characteristics are to be used as field indicators of disturbance,
it is necessary to know when LWD should, or should not, be present in channel.)
The nomogram is a tool to assist in determining the type of channel morphology. If, in the field,
the nomogram indicates a type of morphology that appears incorrect, the field measures should
be re-taken. For instance, if a step-pool morphology is determined from Figure 5, but the channel
is clearly a riffle-pool morphology, the field values used (with emphasis on channel slope) should
be checked.
Figure 5. Nomogram used to determine channel morphology.

Figure 6. Channel morphologies of small- and intermediate-sized channels.


a) Step-pool morphology (SPr SPb and SPb-w; after Church 1992)

b) Cascade-pool morphology (CPc and CPb; after Grant et. al. 1990)

c) Riffle-pool morphology (RPg and RPc)

Figure 7. Determining the influence of LWD on channel morphology.

You might also like