Scribd
Upload
98 views

Measuring Plant Frequency: Rangeland & Riparian Habitat Assessment 1

Frequency is a measure of how often a plant species appears in sampling units like quadrats. It is expressed as a percentage. Frequency is useful for comparing plant communities over time and describing species distributions but cannot indicate changes in canopy, cover, or density. Plot size influences frequency, so it must be appropriate to capture the important species. Frequency can be measured through random plots, nested plots, or point intercept methods by recording plant presence at locations.

Uploaded by

cozzy'mozzy..dozzy.;
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views

Measuring Plant Frequency: Rangeland & Riparian Habitat Assessment 1

Frequency is a measure of how often a plant species appears in sampling units like quadrats. It is expressed as a percentage. Frequency is useful for comparing plant communities over time and describing species distributions but cannot indicate changes in canopy, cover, or density. Plot size influences frequency, so it must be appropriate to capture the important species. Frequency can be measured through random plots, nested plots, or point intercept methods by recording plant presence at locations.

Uploaded by

cozzy'mozzy..dozzy.;
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Measuring Plant Frequency

I.

Definition - Frequency is the number of times a plant species is present in a given


number of quadrats of a particular size or at a given number of sample points. Frequency
is usually expressed as a percentage and sometimes called a Frequency Index. The
concept of frequency refers to the uniformity of a species in its distribution over an area.
No counting is involved just a record of species present.

II.

Uses of Frequency Data.


A. Frequency is most often used to compare plant communities and to detect changes in
vegetation composition over time.
B. Used to describe the distribution of a species in a community.
C. Often used in combination with density or cover estimates.
D. Used to measure trend or condition.
E. Shouldnt use frequency to compare abundance of different species.

III.

Advantages:
A. High repeatability can be obtained.
B. Fast and easy to measure.
C. Frequency of rooted plants is less sensitive to fluctuations in climatic and biotic
influences; especially for perennial vegetation.
D. Can describe distribution of species in a community.

IV.

Limitations:
A. Frequency is highly influenced by the size and shape of the quadrats used.
B. Highly sensitive to changes resulting from seedling establishment.
C. Sensitive to abundance and changes in pattern of distribution in the sampled area.
D. Frequency cannot tell which parameter has changed: canopy, cover, density or pattern
of distribution.
E. Hard to interpret frequency data due to no definite relationship between frequency and
density for non randomly distributed plant population.

Rangeland & Riparian Habitat Assessment

V.

How to Determine If a Species Is Present or Absence:


A. First, specify what constitutes a plant species being present. Any of these will work as
long as the technique is documented.
1.

Rooted inside the plot or runners?

2.

Shoots or whole plant?

3.

Overhang inside the plot or rooted only?

B. Rooted Frequency - the plant of interest must be rooted inside the sample plot in order
to be counted. This is the most commonly recorded measure of frequency.
C. Shoot Frequency - any runners, shoots, leaves, and/or overhang, etc. that lie inside
the plot allows the plant to be counted.
VI.

Frequency Is Influenced by Plot Size and Shape.


A. If the sample plot is small, the chances of the plant species of interest being recorded
is small, causing a low frequency.
B. If the plot is too large, the plant species of interest will be in almost all the plots. This
will cause a high Frequency Index and will not show the plant distribution in a
community.
C. Suggested empirical sizes (Cain and Castro 1959.)
Moss layer

Herb layer

01-.0 m2
1-2 m2

Tall herbs and low shrubs

4 m2

Tall shrubs and low trees

10 m2

Trees

100 m2

Other commonly used units

1 m2

(1x1 m or 2 x m)

Remember: Frame size must be uniform in order to use for comparisons


between species!
VII. Dr. Karens Collection of Guidelines
A. Plot size should be such that frequency for the important species fall between 10% and
90%.; or, if possible between 20% and 80%.
B. Plot size may change depending on species measured. Plot size should be 1 to 2 times
as large as mean area of most common species.
C. Include max. number of species (big enough plot to include many species).
Rangeland & Riparian Habitat Assessment

D. There is a math equation to help determine size of plot using a logarithmic relationship
between frequency and density (refer to Bohnam 1989).
E. 25 plots randomly located or 25 randomly located transects should give satisfactory
results within a homogeneous plant community.
F. If frequency is 100% for the plant species in interest, reduce the frame size
(Daubenmire 1969).
G. If plant species of interest is not present in most of the samples taken, increase plot
size.
VIII.

Frequency measurement methods:


A. Frequency measures can be accomplished by random or systematic locations of plots.
B. Plots
1. Count and record the number of individuals of each species in a each plot

2.

3. For example. If 200 plots were examined and Festuca idahoensis occurred in 34 of
the plots then, % Frequency of Festuca is 17% = (34 200) 100

C. Nested Plots

Rangeland & Riparian Habitat Assessment

1. A series of 3 -5 plots nested within each other


2. Record plant nested in smallest plot, then in successively larger plots
3. Presence of a plant in smaller plot = presence in larger plot
4. Estimate Frequency for each plot separately (equation given above)
5.

Look at data to see which plot size most appropriately estimates each important
species. The advantage of this technique is that one does not need to determine in
advance which plot size is going to best represent each species.

D. Points - sampling or step-point (Also, used for cover measurements).


1. At each point, record the species at the tip of the boot or the plant nearest to that
point.

2.

IX. Important Reference for Estimation of Fequency.


Bonham, C.D. 1989. Frequency 90-96p. Measurements for Terrestrial Vegetation. John Wiley
and Sons Inc. New York, NY pp. 90-96.
Cain, S.A. and G.M. DE O. Castro. 1959. Manual of Vegetation analysis. Harper, NY pp. 325.
Daubenmire, R. E. 1968. Plant communities: A textbook of plant synecology. Harper and Row,
New York. pp. 300.
Mueller - Dombois, D. and H. Ellenberg. 1974. Aims and Methods of Vegetation Ecology. John
Wiley and Sons Inc. New York, NY pp. 74
Smith, S.D. S.C. Bunting and M. Hironaka. 1986. Sensitivity of frequency plots for detecting
vegetation change. Northwest Science. 60:279-286.

Rangeland & Riparian Habitat Assessment

You might also like