Data Communication - CS601 Spring 2010 Mid Term Solved Mcqs
Data Communication - CS601 Spring 2010 Mid Term Solved Mcqs
May 07,2011
Moaaz Siddiq
Latest Mcqs
MIDTERM EXAMINATION
Spring 2010
Question No: 1
( Marks: 1 ) - Please choose one
Effective network mean that the network has fast delivery, timeliness and
high bandwidth
duplex transmission
accurate transmission (P6)
low bandwidth
Question No: 2
( Marks: 1 ) - Please choose
A set of devices connected by communication links is called networking
True (P12)
False
Question No: 3
( Marks: 1 ) - Please choose one
Which one best describes the given statement:
"To allow multiple users to share total capacity of a transmission medium"
congestion control
exchange management
multiplexing (P17)
Question No: 4
( Marks: 1 ) - Please choose one
Line configuration refers to the way two or more devices attach to a
Link (P25)
Circuit
Route
Node
Question No: 5
( Marks: 1 ) - Please choose one
requires the maximum number of I/O ports.
Bus
Star
Mc100401285
Mesh
Ring
(P29)
Question No: 6
( Marks: 1 ) - Please choose one
is used to define the direction of the signal flow between the linked devices.
transmission mode
(P34)
transmission method
transmission impairments
Question No: 7
( Marks: 1 ) - Please choose one
Unidirectional traffic movement is overcome by dual ring technology.
True (P33)
False
Question No: 8
( Marks: 1 ) - Please choose one
layer of OSI model.
Trailer is only added at
Question No: 9
( Marks: 1 ) - Please choose one
Data link layer deals with mechanical and electrical specifications of transmission medium and
interface
True
False
(P44)
Question No: 10
( Marks: 1 ) - Please choose one
A signal that repeats a pattern over a regular interval of time is called
periodic signal
analog signal
composite signal
Question No: 11
If there is
(P58)
instantaneous change
continuous change (P61)
no change
Question No: 12
Mc100401285
signal amplitude
frequency
phase
time
(P63)
Question No: 13
( Marks: 1 ) - Please choose
DC component is also termed as Direct current component or a component with non-zero
frequency.
False
True
(P72)
Question No: 14
( Marks: 1 ) - Please choose one
Quantization means measuring amplitudes of signal at equal intervals.
True
False
(P80)
Question No: 15
( Marks: 1 ) - Please choose one
Amplitude in ASK is more resistive to EMI and Noise.
True (P87)
False
Question No: 16
( Marks: 1 ) - Please choose one
ASK, PSK, FSK and QAM are examples of
modulation.
digital-to-digital
digital-to-analog (P85)
analog-to-analog
analog-to-digital
Question No: 17
( Marks: 1 ) - Please choose one
The bit rate always equals the baud rate in which type of signal?
FSK (P86)
QAM
4-PSK
PSK
Question No: 18
( Marks: 1 ) - Please choose one
Asynchronous transmission is
Mc100401285
Slow (P99)
costly
non-effective
fast
Question No: 19
A
Demodulator (P110)
Modulator
Digital-to-analog converter
Question No: 20
( Marks: 1 ) - Please choose one
If a station does not receive its signal up to a specified time that system issues an alarm to
MIDTERM EXAMINATION
Spring 2010
Question No: 1
( Marks: 1 ) - Please choose one
The information to be communicated in a data communications system is the
Medium
Protocol
Message
(P 7)
Transmission
Question No: 2
( Marks: 1 ) - Please choose one
Which is not an element of protocol
semantics
timing
communication service module (P19)
Mc100401285
Question No: 3
( Marks: 1 ) - Please choose one
Line configuration refers to the way two or more devices attach to a ______.
Link
(P 25)
Circuit
Route
Node
Question No: 4
( Marks: 1 ) - Please choose one
_________requires the maximum number of I/O ports.
Bus
Star
Mesh
(P29)
Ring
Question No: 5
( Marks: 1 ) - Please choose one
Which topology requires a central controller or hub?
Mesh
Star
(P 30)
Bus
Ring
Question No: 6
( Marks: 1 ) - Please choose one
Layers 5, 6 and 7 also called as network support layers.
True
False (P 42)
Mc100401285
Question No: 7
( Marks: 1 ) - Please choose one
Internet with small i specifies the world wide Network the actual internet.
True
False
(P 39)
Question No: 8
( Marks: 1 ) - Please choose one
Data link layer deals with mechanical and electrical specifications of transmission medium and interface
True (P 44)
False
Question No: 9
( Marks: 1 ) - Please choose one
Data synchronization is a function related with ___________
session layer
(P 51)
presentation layer
transport
Question No: 10
( Marks: 1 ) - Please choose one
OSI model was developed prior to TCP/IP model.
True (P 54)
False
Question No: 11
( Marks: 1 ) - Please choose one
Fourier transform tells us that any digital signal can be decomposed into infinite number of periodic signals
True
False (P58)
Mc100401285
Question No: 12
( Marks: 1 ) - Please choose one
A signal that repeats a pattern over a regular interval of time is called_______.
periodic signal (P58)
analog signal
composite signal
Question No: 13
( Marks: 1 ) - Please choose one
Frequency band in which 99% of the total power resides is called_______
power bandwidth (P 67)
half power bandwidth
3dB bandwidth
F.M.
Question No: 14
( Marks: 1 ) - Please choose one
In differential Manchester we require two transition or signal changes to represent binary_____
zero
one (P76)
both zero and one
Question No: 15
( Marks: 1 ) - Please choose one
In Alternate mark inversion the term mark comes from_________
telegraphy (P77)
telephony
digital telephony
Mc100401285
Question No: 16
( Marks: 1 ) - Please choose one
A 56k modem can download at a rate of __________ Kbps and upload at a rate of __________ Kbps.
33.6: 33.6
33.6: 56.6
56.6: 33.6
56.6: 56.6
Question No: 17
( Marks: 1 ) - Please choose one
The bit rate always equals the baud rate in which type of signal?
FSK (P 86)
QAM
4-PSK
PSK
Question No: 18
( Marks: 1 ) - Please choose one
Asynchronous transmission is ___________
slow (P 99)
costly
non-effective
fast
Question No: 19
Mc100401285
Question No: 20
( Marks: 1 ) - Please choose one
_________ requires more bandwidth.
FSK
ASK (P 112)
PSK
QAM
MIDTERM EXAMINATION
Spring 2010
Question No: 1
( Marks: 1 ) - Please choose one
Which topology requires a central controller or hub?
Mesh
Star (P 30)
Bus
Ring
Question No: 2
( Marks: 1 ) - Please choose one
Unidirectional traffic movement is overcome by dual ring technology.
True (P33)
False
Mc100401285
Question No: 3
( Marks: 1 ) - Please choose one
Which one best describes the given statement:
"To allow multiple users to share total capacity of a transmission medium"
congestion control
exchange management
multiplexing
(P17)
Question No: 4
( Marks: 1 ) - Please choose one
Which one is not among standard creation committee.
internet society and IETF (P 24)
ITU-T
IEEE
Question No: 5
( Marks: 1 ) - Please choose one
Set of rules that govern communication is called
OSI model
Protocol (P 8)
TCP/IP model
Datagram
Question No: 6
( Marks: 1 ) - Please choose one
Frequency of a failure and network recovery time after a failure is measures of the ____________ of a
network.
Performance (P 14)
Reliability
Security
Feasibility
Mc100401285
Question No: 7
( Marks: 1 ) - Please choose one
3dB is also called as power bandwidth.
True
False (P66)
Question No: 8
( Marks: 1 ) - Please choose one
ASK, PSK, FSK and QAM are examples of ____________ modulation.
digital-to-digital
digital-to-analog
(P85)
analog-to-analog
analog-to-digital
Question No: 9
( Marks: 1 ) - Please choose one
Packet switching is a connection oriented service.
True
False (P38)
Question No: 10
( Marks: 1 ) - Please choose one
Data synchronization is a function related with ___________
session layer
(P51)
presentation layer
transport
Mc100401285
Question No: 11
( Marks: 1 ) - Please choose one
Fourier transform tells us that any digital signal can be decomposed into infinite number of periodic signals
True
False (P 58)
Question No: 12
( Marks: 1 ) - Please choose one
The internet model consists of _________ layers.
three (P239)
two
five
seven
Question No: 13
( Marks: 1 ) - Please choose one
Analog to digital conversion is also termed as modulating an analog signal.
True
False (P 77)
Question No: 14
( Marks: 1 ) - Please choose one
PCM is the first process of PAM.
True
False (P80)
Mc100401285
Question No: 15
( Marks: 1 ) - Please choose one
A modulator converts a(n) ____________ signal to a(n) ____________ signal.
FSK: PSK
Digital: analog (P 110)
Analog: digital
PSK: FSK
Question No: 16
( Marks: 1 ) - Please choose one
The _______________ layer changes bits into electromagnetic signals.
physical
data link
transport
none of given
http://www.ee.surrey.ac.uk/Projects/CAL/networks/Physical_Layer.htm
Question No: 17
( Marks: 1 ) - Please choose one
We need ____________ to decompose a composite signal into its components.
fourier transform (P 64)
nyquist theorem
shannon capacity
Question No: 18
( Marks: 1 ) - Please choose one
The bit rate always equals the baud rate in which type of signal?
FSK (P 86)
QAM
Mc100401285
4-PSK
PSK
Question No: 19
( Marks: 1 ) - Please choose one
There are _____ possible variations of 16 QAM.
five
two
three (P93)
four
Question No: 20
( Marks: 1 ) - Please choose one
Number of signal units per second that are required to represent a bit is called bit rate.
True
False (P 68)
MIDTERM EXAMINATION
Spring 2010
Mc100401285
Bus
Question No: 4 ( Marks: 1 ) - Please choose one
_________requires the maximum number of I/O ports.
Bus
Star
(P29)
Mesh
Ring
Question No: 5 ( Marks: 1 ) - Please choose one
Unidirectional traffic movement is overcome by dual ring technology.
True
(P33)
False
Question No: 6 ( Marks: 1 ) - Please choose one
As the data packet moves from the lower to the upper layers, headers are
__________.
added
subtracted
rearranged
modified
packet (P38)
datagram
Physical (P45)
data link
network
transport
Mc100401285
network layer
session layer
application layer
False (P52)
Question No: 12 ( Marks: 1 ) - Please choose one
TCP/IP model Application layer incorporate OSI Application and presentation
layers
True
False
Question No: 13 ( Marks: 1 ) - Please choose one
A sine wave must be an analog signal.
True (P58)
False
Biphase (P75)
polar
biphase & polar
none of the given
base signal
carrier frequency and base signal
none of given
Mc100401285
Parallel (P99)
Same (P109)
different
digital
analog
Demodulator (P110)
Modulator
Digital-to-analog converter
MIDTERM EXAMINATION
Spring 2009
Question No: 1 ( Marks: 1 ) - Please choose one
signals which are not identical to each other.
In RS 422 Balanced mode two lines carry
same (P109)
different
digital
analog
Question No: 2 ( Marks: 1 ) - Please choose one
The
generates the data and passes it along with any control information to a
.
DTE; DCE (P 101)
DCE; DTE
DCE; node
DTE; application
Mc100401285
costly
non-effective
fast
Mc100401285
Two
Five
Seven
Mc100401285
links.
MIDTERM EXAMINATION
Spring 2009
Mc100401285
True (P31)
False
10 (P29)
15
20
False (P39)
Question No: 5 (Marks: 1) - Please choose one
Data link layer deals with mechanical and electrical specifications of transmission
medium and interface
True (P 44)
False
Question No: 6 (Marks: 1) - Please choose one
When data are transmitted from device A to device B, the header from As layer 4
is read by Bs __________ layer.
physical
transport
application
none of the given
False (63)
Question No: 8 (Marks: 1) - Please choose one
Frequency band in which 99% of the total power resides is called_______
Mc100401285
NRZ-I (P73)
RZ
AMI (P77)
RZ
False (P78)
Question No: 12 (Marks: 1) - Please choose one
Quantization means measuring amplitudes of signal at equal intervals.
True
False (P80)
Question No: 13 (Marks: 1) - Please choose one
The last process in PCM is _________ digital data into digital signal.
Encoding (P70)
decoding
modulating
slow (P99)
costly
non-effective
fast
Mc100401285
DCE; DTE
DCE; node
DTE; application
DTE (P101)
DCE
EIA-232 D (P102)
EIA-232 A
EIA-232 B
EIA-232 C
Demodulator (P110)
Modulator
Digital-to-analog converter
Mc100401285