Users Manual (5.1.4.

0)

Audio Video Recorder

Users Manual (5.1.4.0)

TABLE OF CONTENTS
Chapter 1. Main System Application (Control)
1.1 Startup Screen------------------------------------------------------------------------------------------------------------------------------- 4
1.2 Login------------------------------------------------------------------------------------------------------------------------------------------------ 5
1.3 Exit/Logout----------------------------------------------------------------------------------------------------------------------------------------- 5
1.4 System information ----------------------------------------------------------------------------------------------------------------------------- 5
1.5 Control Screen------------------------------------------------------------------------------------------------------------------------------------ 6
1.6 Setup------------------------------------------------------------------------------------------------------------------------------------------------ 7
1.6.1 System ---------------------------------------------------------------------------------------------------------------------------------------- 7
1.6.1.1 DVR Information----------------------------------------------------------------------------------------------------------------------- 7
1.6.1.2 System Time Setup ------------------------------------------------------------------------------------------------------------------ 8
1.6.1.3 System Power Management ------------------------------------------------------------------------------------------------------ 9
3.6.1.4 Auto Switching Interval-------------------------------------------------------------------------------------------------------------- 10
1.6.1.5 E-map------------------------------------------------------------------------------------------------------------------------------------ 10
1.6.1.6 TV-out-------------------------------------------------------------------------------------------------------------------------------------12
1.6.1.7 On-screen Display---------------------------------------------------------------------------------------------------------------------14
1.6.1.8 Text Inserter----------------------------------------------------------------------------------------------------------------------------- 15
1.6.1.9 Hard Disk Usage----------------------------------------------------------------------------------------------------------------------- 18
1.6.1.10I-phone ---------------------------------------------------------------------------------------------------------------------------------- 19
1.6.1.11 Maintenance Log --------------------------------------------------------------------------------------------------------------------- 19
1.6.2 Device------------------------------------------------------------------------------------------------------------------------------------------- 19
1.6.2.1 Camera[Motion/Object Detection/People Counter/Mosaic/Data retain/PTZ]-------------------------------------------- 19
1.6.2.2 Output Device -------------------------------------------------------------------------------------------------------------------------- 36
1.6.2.3 Input Device----------------------------------------------------------------------------------------------------------------------------- 37
1.6.2.4 Audio -------------------------------------------------------------------------------------------------------------------------------------- 38
3.6.2.5 Alert---------------------------------------------------------------------------------------------------------------------------------------- 39
1.6.3 Event-------------------------------------------------------------------------------------------------------------------------------------------- 41
1.6.3.1 Input--------------------------------------------------------------------------------------------------------------------------------------- 41
1.6.3.2 Motion Detection----------------------------------------------------------------------------------------------------------------------- 42
1.6.3.1 No Video Signal------------------------------------------------------------------------------------------------------------------------ 43
3.6.3.4 Watch Dog--------------------------------------------------------------------------------------------------------------------------------43
1.6.4 Schedule -------------------------------------------------------------------------------------------------------------------------------------- 46
1.6.4.1 Recording [Manual Recording]- ---------------------------------------------------------------------------------------------------- 47
3.6.4.2 Device------------------------------------------------------------------------------------------------------------------------------------- 48
1.6.5 Network----------------------------------------------------------------------------------------------------------------------------------------- 49
1.6.5.1 DVR Server------------------------------------------------------------------------------------------------------------------------------- 49
1.6.5.2 Web Server------------------------------------------------------------------------------------------------------------------------------- 50
1.6.5.3 Central Station--------------------------------------------------------------------------------------------------------------------------- 50
1.6.5.4 E-mail ------------------------------------------------------------------------------------------------------------------------------------- 51
1.6.5.5 Dial Alarm--------------------------------------------------------------------------------------------------------------------------------- 53
1.6.5.6 IP Address Setup------------------------------------------------------------------------------------------------------------------------54
1.6.6 User------------------------------------------------------------------------------------------------------------------------------------------ 55
Chapter 2 View Log Application (Status)-------------------------------------------------------------------------------------------------------- 56
2.1 Screen Features---------------------------------------------------------------------------------------------------------------------------------- 56
2.1.1Event log--------------------------------------------------------------------------------------------------------------------------------------- 57
Chapter 3 Playback Application (Search)------------------------------------------------------------------------------------------------------- 58
3.1 Search Features 1 ------------------------------------------------------------------------------------------------------------------------------ 58
3.2 Search Features 2 ------------------------------------------------------------------------------------------------------------------------------ 58
3.2.1 Playback-------------------------------------------------------------------------------------------------------------------------------------- 58
3.2.2 Event/Object/Text/People Count Search --------------------------------------------------------------------------------------------- 59
3.2.3 Monitoring & Searching ------------------------------------------------------------------------------------------------------------------ 64
3.2.4 Bookmark & Go To-------------------------------------------------------------------------------------------------------------------------- 65
3.2.5 Save ------------------------------------------------------------------------------------------------------------------------------------------- 65
3.2.6 Print ------------------------------------------------------------------------------------------------------------------------------------------- 69
3.2.7 Backup----------------------------------------------------------------------------------------------------------------------------------------- 70
3.2.7.1 DFS Backup--------------------------------------------------------------------------------------------------------------------------------70
3.2.7.2 EXE Backup--------------------------------------------------------------------------------------------------------------------------------74
3.2.7.3 Run CD Burner(For Non WindowsXP Users) -------------------------------------------------------------------------------------77
3.2.7.4 Run CD Burner(For WindowsXP Users Only) ------------------------------------------------------------------------------------81

Audio Video Recorder

Users Manual (5.1.4.0)

3.2.7.5 Playback----------------------------------------------------------------------------------------------------------------------------------- 85
Chapter 4 Remote Monitoring System --------------------------------------------------------------------------------------------------------- 86
4.1 Remote Client Installation ------------------------------------------------------------------------------------------------------------------86
4.2 Using AVR S/W---------------------------------------------------------------------------------------------------------------------------------86
4.3 Using Web Browser --------------------------------------------------------------------------------------------------------------------------87
4.4 Remote client Execution ------------------------------------------------------------------------------------------------------------------- 93
4.5 Remote Save and Backup------------------------------------------------------------------------------------------------------------------95
4.6 Real Time Audio-------------------------------------------------------------------------------------------------------------------------------96
Appendix 1 POS DVR--------------------------------------------------------------------------------------------------------------------------------- 97
1.1Hardware Installation---------------------------------------------------------------------------------------------------------------------------- 98
1.1.1 Parts ----------------------------------------------------------------------------------------------------------------------------------------- 99
1.1.2 Installation -------------------------------------------------------------------------------------------------------------------------------- 100
Appendix 2 I-phone ---------------------------------------------------------------------------------------------------------------------------------101
2.1 Installation --------------------------------------------------------------------------------------------------------------------------------------102
2.2 Execution ---------------------------------------------------------------------------------------------------------------------------------------103
2.3 Audio Setup ------------------------------------------------------------------------------------------------------------------------------------104
Appendix 3 MDVR ----------------------------------------------------------------------------------------------------------------------------------106
3.1 Installation --------------------------------------------------------------------------------------------------------------------------------------107
3.2 Overview ----------------------------------------------------------------------------------------------------------------------------------------109
3.3 Execution --------------------------------------------------------------------------------------------------------------------------------------- 110
3.3.1 Properties---------------------------------------------------------------------------------------------------------------------------------- 110
3.3.2 Log in & Log out --------------------------------------------------------------------------------------------------------------------------112
3.3.3 Set up --------------------------------------------------------------------------------------------------------------------------------------- 113
3.4 Event ---------------------------------------------------------------------------------------------------------------------------------------------- 115
3.6 Search ---------------------------------------------------------------------------------------------------------------------------------------------116
3.6.1 Save ------------------------------------------------------------------------------------------------------------------------------------------117

Audio Video Recorder

Users Manual (5.1.4.0)

CHAPTER 1
Main System Application (Control)
1.1 Startup Screen

The above screen will appear as AVR DVR system starts.

1.2 Login

The default values for User and Password are admin and no password. Click OK to execute AVR DVR
system. To give admin a password and to create new users, certain configurations are required (Setup/User).
Only admin and users with appropriate authorization have access to the Setup menu.
Note: Virtual keypad is available on the right top of GUI if needed
4

Audio Video Recorder

Users Manual (5.1.4.0)

1.3 Exit/Logout

To end AVR DVR system, select Exit and type in password.

1.4 System Information

Click on System Information to see DVR system information, such as OS version, CPU, RAM, HDD, IP
address, DVR model and DVR software.

Audio Video Recorder

Users Manual (5.1.4.0)

1.5 Control Screen

Model

Date/Time
User

PTZ Adjustment

Exit
Logout

Lights

Minimize
Setup
Network
System Information

PTZ Control
Preset/Touring

Volume
TV-out
Control
Camera Selection
Camera Layout Panel

Manual Output Panel

Search

Audio Video Recorder

Users Manual (5.1.4.0)

1.6 Setup
1.6.1 System

1.6.1.1 DVR Information

Create a DVR name and put in admin. info. They will be

displayed on outgoing e-mails.

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.1.2 System Time Setup

By clicking System Time Setup, users is able to set Date and Time in DVR software.

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.1.3 System Power Management

* Period: Select a day that DVR system reboots automatically

by the period.
* Reserved time: Time set to shut down or to reboot computer
* Disable: selected when System Power Management is not to be
used
* Shutdown: selected when shutting down computer is required
at the time set
* Reboot: selected when rebooting computer is required at the
time set
* Exit & Turn off Computer: By checking the box, computer will be
turned off automatically as a user exits from AVR DVR system.

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.1.4 Auto-switching Interval

Auto-switching Interval is a function that allows green square around selected camera to move to the next
one at the interval set.
e.g.) Camera 1 -> 10 sec. -> Camera 2 ->10 sec. -> Camera 3.

1.6.1.5 E-map

Click on the E-map button to design E-map.

Click on Open Map Image to select an E-map image.

* Details: First select either Shutdown or Reboot to enable Period.

For example in above picture, 7 days after the basic date, system will shutdown automatically.
Details shows the set date and it will be the starting point.
10

Audio Video Recorder

Users Manual (5.1.4.0)

The above is a designed E-map sample. Drag mouse to position Camera/Input/Output and design E-map.

11

Audio Video Recorder

Users Manual (5.1.4.0)

Click on the E-map button positioned next to the I-phone button to open E-map.
White Camera: Not on Recording, Yellow Camera: On Recording,
White Input/White Output: Not Activated, Yellow Input/Yellow Output: Activated

1.6.1.6 TV-OUT

TV-OUT is a function that sends selected cameras to a call monitor (external analog
monitor). Click on the TV-OUT button for setup.

12

Audio Video Recorder

Users Manual (5.1.4.0)

The Number of TV-out Supported

T04
1
CS04
1
CD08
2

T08
2
CS08
1
LS16
2

T12
3
CS16
1
LD16
3

T16
4
CD16
2

* The models such as CD (240FPS/240FPS) and

LS(480FPS/120FPS) support 2 TV-OUTs. LD16
(480FPS/240FPS) support 3 TV-OUTs and the rest of
the models support 1.
* Setup Options:
1. Same as Server Screen Mode
( For LS (480FPS/120FPS) only) - TV-OUT Monitor
displays whats on DVR server.
Manual Channel Selection - Channels are selected
manually. Once Manual Channel Selection is
selected, channels can also be selected manually on
Control screen by placing mouse on camera picture
and clicking the right mouse.
2. Auto Channel Switching - Selected channels
rotate to display at the switching interval set.
* Switching Interval: The length of time to stay at one
camera

1.6.1.7 On-screen Display

Font Settings: Font change on screen display.

Position Setting: Position change on screen
display.

13

Audio Video Recorder

Users Manual (5.1.4.0)

On a camera screen, you may click one right mouse to control OSD as bellows.
* Show Camera Names and Status: By checking it, camera names and status will be displayed on camera
pictures.
* Show Motion Detection Blocks: By checking it, green motion detection blocks will be displayed on camera
pictures when recording schedule is set as M (Setup/Schedule).
* Show Object Detection Blocks: By checking it, blue object detection blocks will be displayed on camera
pictures.

Note : One right mouse click can be a very useful tool. Manual TV-out and OSD setup can be done. Additionally,
instant recording can start by one click.

14

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.1.8 Text Inserter (Optional Function)

Text Inserter is a function that allows AVR DVR system to integrate with
POS machines if you installed text inserter as additional S/W. Simply
select POS driver like selecting PTZ driver to enable POS text inserter
program and transactions that occur will be displayed on selected
camera pictures. Transaction recording and text search are possible as
well.

How to Set
1. Tick the Using Text Inserter
2. Choose a connected POS driver.(POS driver is
addable as PTZ protocol adding.)
3. Click on Advanced to set hardware feature.

*Device Connection:
Select camera(s) and a
comport connected with POS
system(s)

15

Audio Video Recorder

Users Manual (5.1.4.0)

* Text Filter: Register important

goods and useless text to display
distinguishably and search POS
data conveniently.
* Important goods items:
Pre-registered items will be
displayed in red characters.
* Useless text: It is not going to be
displayed during transaction.

* About: Shows POS S/W version.

16

Audio Video Recorder

Users Manual (5.1.4.0)

Font Settings: Font change on screen

display.
Position Setting: Position change on screen
display.

17

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.1.9 Hard Disk Usage

Hard Disk Usage is to select data storage method. If Once is selected,
data will be stored up to the point where HDD reaches its maximum
capacity. If Recycle is selected, data will be overwritten from the point
HDD reaches its maximum capacity based on First In First Out.

1.6.1.10 I-Phone
I-Phone is Two-Way Audio Communication.
Check the box, go to Control Screen, and click on the I-Phone button
for audio communication. For more detailed I-Phone setup, refer to
Appendix 2.

* Port No.: A port number for I-Phone use has to be set up.
Normally the default value is good to use.
* Timeout: It indicates the maximum length of connection
trial. If there is no response within the value set, call will be
cancelled.
* Accept Automatically: To accept counter parts IP-phone
connection without checking a confirmation message.

18

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.1.11 Maintenance Log

It is used to record and view maintenance history.

1.6.2 Device

Device sub-screen is
divided into 5 different
setup categories; Camera,
Output,
Input, Audio and Alert.
All devices in each category
can be set up on one same
page.

Modify Framerate itself :By

ticking it, DVR software will
automatically
allocate
proper frames to channels.

19

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.2.1 Camera

Cameras will be enabled by

checking the boxes.

Different resolutions and recording

frame rates can be set up for
different cameras.

* Video Signal Type: Select either

NTSC or PAL.
* Auto Channel Scan: It
automatically identifies all the active
video channels. Make sure to
always click and scan after S/W
version change.
* Default: It sets Event Recording
Frame and Recording Frame as
default values.

[Camera]

Double-click on Camerafor more

individual Camera setup.
Select recording picture quality.
Using Still Image :
It is a function that captures still image
when Recording schedule mode is set
as E or H.
(Caution) Under R mode at Recording
schedule, this function stop recording
the channel.

* Pre-alarm (max. 10 sec.): Length of time to be recorded before event

* Post-alarm (max. 10 min.): Length of time to be recorded after event
20

Audio Video Recorder

Users Manual (5.1.4.0)

[Motion Detection]

Select a function between

Motion
detection,
Object
detection and People Count.
Motion detection is a function
that DVR software detects
every movement or motion by
comparing a frame with its
previous frame.

Zone Setting:
1. Drag mouse on desired place to set motion detection zones.
2. To clear the zones set, click on Clear all or drag mouse after
click on clear:.

Use Details: To set more than one motion detection zone. Possible up to 16 motion detection
zones with all different colors.
How to set
Click on Add Zone and select another zone desired to be detected.
Note: If the number of zones exceeds 16, above error message will be appeared.
21

Audio Video Recorder

Users Manual (5.1.4.0)

z
z

Zone All: Displays all areas

together that have been set for
the zones.

Setting All: Select whole

area
Delete Zone: Deletes zones
one by one.

22

Audio Video Recorder

Users Manual (5.1.4.0)

[Object Detection]

It is a function that marks all the changes occurred from the original scene.
AVR will detect new & missing objects after a certain period of time (detecting
interval).
*Detecting Interval: An interval that DVR tries repeatedly to detect any object
change in the zone set. For example, if the object is appeared and remained only
5 seconds, it will not be detected in case 1 min. detecting interval is set as above.
*Viewing Original Frame: Checking an original image set.
*Set as Original Frame: Save an original image to be viewed to check missing or
appeared object.
*Set: To mark a zone.
*Setting All: Select all zone in a selected channel
*Clear All: To clear set zone.

23

Audio Video Recorder

Users Manual (5.1.4.0)

Object Detection Blocks

Click the right mouse and select Clear Object Detection

Blocks to remove all the blocks.

How to Set up:

Tick the Object Detection box and click on Zone Settings.

Drag the mouse to select object detection zone (same as Motion Detection).

Click on the Set Frame button to select original (default) image.

Go to Detection Interval and determine when to mark new object after its pause.

Go to Setup/Schedule and select M

Go to the Control Screen and find the red-squared Object Detection symbol.

One click on the View Original Frame button will display original image set.

Click it again to reactivate the Set Frame button.

24

Audio Video Recorder

Users Manual (5.1.4.0)

[People Counter]
It is a function that counts people coming in and out of a certain place.

How to Set up:

1. Set Count Interval.
2. Set zone by dragging
mouse.
3. If a directional counting is
needed, select one.
*Motion Detection: Counting
by Motion Detection.
*Input Device: Counting by
Input Device such as sensor.
*Reset Everyday: Tick box to
reset everyday automatically.
*Interval(Sec.):
Counting
interval from the time object
is detected.
*Check Movement from 1st
Zone to 2nd: Counting based
on the direction a place to
another.
*Check Movement from 2nd
Zone to 1st: Counting based
on the direction a place to
another.
*Set: Set the first zone.
*Set 2nd Zone: Set the
second zone to be detected.
*Clear: Clear the zone
selected.
*Setting All: Selects all areas
on the screen.
*Clear All: Clear all zones
selected.

25

Audio Video Recorder

Users Manual (5.1.4.0)

[Mosaic]
It is a function that veils restricted areas to keep regular users uninformed.

How to Set up:

Click on Advanced.
Tick the Use Mosaic box.
Click on Mosaic Zone Settings.
Set Mosaic Zone.
Go to the Control Screen and find
veiled areas.

Note
1. While using Mosaic, Save or
Print can not be performed.
2. To see unveiled area, logging in as
Admin or Admin Mode is
required.

26

Audio Video Recorder

Users Manual (5.1.4.0)

[Data Retain]
It is a function that retains data only for the period set. For example, if 10 days is set, AVR will delete all
previous data before 10 days regardless of the capacity remaining in HDD.

How to Set up:

Click on Advanced

Tick the Use Data Retain.

Click on Detail. to select a day period to retain

Note: Warning message to inform as above will be
appeared. To continue, click on Yes

27

Audio Video Recorder

Users Manual (5.1.4.0)

[PTZ Camera Setup]

When using a PTZ camera, check the box

and select a model name. AVR DVR
system supports nearly 40 different
protocols.

* Camera ID: Leave it as it is if only one PTZ camera is used.

Otherwise, give each camera a different number.
* Restore as Previous : Tick the box and set time period to move
camera back to initial position after a certain period of time.

Select the port used for PTZ camera.

* Bit per Second: It is 9600 for most of PTZ cameras. But a few
can have different values.
Refer to camera manual.

* Apply All: The same settings will be applied to the rest of the
cameras by clicking on Apply All.

PTZ Control by Drag and Drop

How to Set Up:

1. Simply ticks Using PTZ Mouse Control as above and
select a proper PTZ model name.
2. On a PTZ screen, drag mouse to the desired position to
see.

28

Audio Video Recorder

Users Manual (5.1.4.0)

Virtual Keypad for Speed Dome Camera

How to Set Up:

1. Select SpeedDome Camera/TBT INC. protocol
to run Virtual Keypad.
2. Set proper Camera ID, Port, Bit per Second, and
etc.
3. Click right mouse button on PTZ Screen and
select PTZ Keypad.

29

Audio Video Recorder

Users Manual (5.1.4.0)

Click on Menu to go into Camera OSD.

Once preset and touring have been set through this virtual keypad, they must be controlled by the
keypad.(Menu buttons on GUI will not work.)
For example, when preset 1 is set, press 1 on the keypad and Preset. Then it moves to the
Preset No. 1 position.
Note:
Now only limited Speed Dome models are available to run this keypad.

30

Audio Video Recorder

Users Manual (5.1.4.0)

[Preset & Touring]

Either click the right mouse on

camera picture or click on the Preset
(Touring) button for Preset (Touring)
setup and use.

[Preset]

Preset is a function that enables a camera to move from one position to another automatically.

31

Audio Video Recorder

Users Manual (5.1.4.0)

* Steps to Set up Presets *

1. Move camera to a desired position using the PTZ
Control on Control screen.
2. Click the right mouse.
3. Name the preset.
4. Repeat the above for setting up as many as 256
presets.
5. Click the right mouse to run preset and
click the Auto button to stop it.

32

Audio Video Recorder

Users Manual (5.1.4.0)

[Touring]
Touring is a function that enables a group of selected presets to work repeatedly.

* Steps to Set up a Tour *

1. Click the right mouse.
2. Name the tour.
3. Click on Add.
4. Select a preset.
5. Click OK.
6. Repeat the above to have more than 1 preset in the tour.
7. Click the right mouse to run the tour.

* Dwell: The length of time that camera will pause before moving to the next preset.
* Speed: Moving speed for selected preset.

33

Audio Video Recorder

Users Manual (5.1.4.0)

34

Audio Video Recorder

Users Manual (5.1.4.0)

Advanced PTZ setup can be done by one right mouse click. Make sure that the PTZ camera to set
up supports advanced PTZ control functions first.

35

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.2.2 Output Device

AVR DVR system can be equipped with as

many as 8 output devices. Simply check
the boxes for use. In addition, outputs can
be manually activated from Control screen
(Manual Alarm).

Double-click on Output for

individual output setup.

* Name: Output device name.

* Length of Activation: The length of output activation (1-60 sec.).
* Length of Standby: The length of output deactivation until reactivation (0-60 sec.).
* Apply All: The same settings will be applied to the rest of the output devices.

36

Audio Video Recorder

Users Manual (5.1.4.0)

3.6.2.3 Input Device

AVR DVR system can be equipped

with as many as 16 input devices.
Simply check the boxes for use.

Each and every input can be

tuned independently.
Signal Types:
NO(+) & (-) detached normally
NC(+) & (-) attached normally

37

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.2.4 Audio

AVR DVR system is equipped with as many

as 8 audio channels.
Simply connect cameras to audio channels
for use, and audio recording will be
completed as chosen.
(e.g.) The above selections indicate that
Audio2 will record Camera3, Audio3 will
record Camera5, etc.

Input Gain (1-15): It is audio level control

similar to volume control.

38

Audio Video Recorder

Users Manual (5.1.4.0)

3.6.2.5 Alert

AVR DVR system is equipped with 1 alert device.

Alert is the beep inside the system that sounds in the case of event.
Check the box for use and select an alert mode.

Length of Activation: The length of alert activation (1-60 sec.).

39

Audio Video Recorder

Users Manual (5.1.4.0)

*Event Sound Settings:

To differentiate alert sound by Events(Sensor, Motion, and No video Signal), select a Wave
File for each.

40

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.3 Event
Event consists of 3 different groups; Input, Motion Detection and No Video Signal. On
this menu, devices can be set to respond to different events.

1.6.3.1 Input

* Length of Full Screen Display:

The time length for full screen display in the
case of input device activation.
* Full Screen Display Channels: Full Screen
Display
: Selected camera channel will pop up if the
linked input device is triggered.
The equipment of application:
Events triggered by Input or Motion
detection can pop on a desired screen among
DVR
system/
DVR+TV-OUT1/TV-OUT2/TV-OUT3.

* Link to Recording: One Input device can have as many as 16 recording cameras on
activation. The below example shows that Camera1 will record in the case of
Input1 activation.

* Link to Output: One Input device can have

as many as 8 activating output devices on
activation. The above example shows that
Output1 will be activated in the case of
Input1 activation.
* Link to Alert: Input device can also be
linked to alert.

41

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.3.2 Motion Detection

The same identical concepts and methods as Input

are applied to Motion Detection.

42

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.3.3 No Video Signal

The same identical concepts

and methods as Input are
applied to No Video Signal.

1.6.3.4 Watchdog

The same identical concepts

and methods as Input
are applied to Watchdog.
When Video Capture Error is
occurred, it is linking to Alert
and Output. User can link the
event to Reboot, Message on
DVR.

43

Audio Video Recorder

Users Manual (5.1.4.0)

The same identical concepts

and methods as Input
are applied to Audio Capture
Error.
When Audio Capture Error is
occurred, it is linking to Alert
and Output. User can link the
event to Reboot, Message on
DVR.

The same identical concepts

and methods as Input
are applied to Recording
Error.
When Recording Error is
occurred, it is linking to Alert
and Output. User can link the
event to Reboot, Message on
DVR.

44

Audio Video Recorder

Users Manual (5.1.4.0)

The same identical concepts

and methods as Input
are applied to Recording
Error.
When Disk Writing Failed is
occurred, it is linking to Alert
and Output. User can link the
event to Reboot, Message on
DVR.

45

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.4 Schedule

Schedule is a place where the different activities of different devices are determined.

Each camera can have different

recording options; scheduled
recording by time & day and selective
recording.
* R: Recording at all times
* E: Recording on event
* N: Stop recording
* H: Recording at all times and higher
frame recording on event

* Use Scheduled Backup: To set backup

automatically.
Please refer to next to example.
* Automatic Start Time: At 1 a.m. it
Automatically starts back up.
Time Period
* From: When Apply Previous Date is
checked, 2 a.m. means yesterday. If not, it is
coming 2 a. m.
* To: Same concept as From.
* Channel: Cameras wish to backup.
* Select All: Select all cameras
* Password: Give password to play back back
up data.
* Retype Password: Retype password to double
confirm.
* Target Directory: Selects directory to backup.
* Create Subdirectory Name as Date: Gives
created directory name based on the date.

3.5.4.1 Camera

46

Audio Video Recorder

Users Manual (5.1.4.0)

The holiday recording schedule set at the bottom of the

Schedule table will be applied to selected dates.

1.6.4.1 Recording [Manual (Instant) Recording]

It is a function that enables users to react on an emergency situation properly by making AVR start
recording immediately.

Start Manual Recording by selecting

Recording On. Stop Manual Recording by
selecting Recording Off.

Note : 1. The purple icon indicates that it is on Manual Recording.

2. Only Admin can use Manual recording.

47

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.4.2 Device

Select detailed schedule for recording on motion detection.

48

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.5 Network

1.6.5.1 DVR Server

* Supported Network:
1. TCP/IP - Connecting to DVR Server from
Client using Lan or DSL
2. PSTN - Connecting to DVR Server from
Client using PSTN or ISDN modem
3. None - Not allowed to connect to DVR Server
remotely
* Port No.: The default port number is 9091.
* Timeout: The time length of trials to connect to
DVR Server from Client
* Maximum Number of Users: The maximum
number of users that can be logged in remotely.
* Details: It shows all the port numbers that are
available to use.

49

Audio Video Recorder

Users Manual (5.1.4.0)

* Transmitted Video Quality: Video quality to be transmitted to Client.

As a reminder, the higher video quality gets, the slower network transmission speed becomes.
Therefore, it is often recommended to select low video quality when using Narrowband.

* Bandwidth: Make sure to select the right bandwidth to have the right network performance.
Note : ar will automatically appoint a proper IP address to router. No router setup required.

1.6.5.2 Web Server

* Port No.: Fixed HTTP Port No.
* Web Login Required: If the box is checked, login is
required when connecting to DVR server using web
browser. If the box is NOT checked, automatic login as
anonymous will be done.

1.6.5.3 Central Station

Central Station is a function that enables Client with static IP
to manage multi DVR sites. Check the box and click on
Properties for setup.
* Note: DVR Manager must be installed on Central Station
Server (Client). For more details, refer to Appendix 3.

Type in the IP address of Central Station Server (Client with Static IP) and click on
Reported Events for more setup.

50

Audio Video Recorder

Users Manual (5.1.4.0)

Choose events to report to Central Station server

and set reporting time period.

1.6.5.4 E-mail
E-mail is a function that enables AVR system to
send out e-mails when selected events occur. Check
the box and click on Properties for setup.

Note : Some e-mail servesr may

require authentication for ID and
PW.

Make sure to put in the right IP

address of SMTP server. Then, click
on Reported Events for more setup.
The Reported Events menu is the
same as Central Station.

51

Audio Video Recorder

Users Manual (5.1.4.0)

Send camera(s) to send out image(s)

when the event occurs.

52

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.5.5 Dial Alarm
Dial Alarm is a function that enables AVR DVR system
to call out on selected events. Check the box and click on
Properties for setup.

Modem card must be installed inside AVR DVR system to make this function work. Type in phone (mobile)
number to report. Click on Reported Events (same setup as Central Station) for more setup.

53

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.5.6 IP Address Setup

Click right mouse and select

Properties for IP setup for AVR
DVRs network functions.

Clicking IP Address Setting will open a window for Network Connections as below.

54

Audio Video Recorder

Users Manual (5.1.4.0)

1.6.6 User

Users can be added, deleted or modified with different authorized access and control levels.
There are no limits in the number of users created.

* Authorized Access: Checked functions will be allowed to access remotely.

* Accessible Channels: Checked channels will be allow to view remotely.
* Control Level: The lowest number will be allowed to have the first priority to set up, control, etc remotely.
* Admin Mode: A user who can go into the setup and program (given the same
authorization as Admin). Only ONE user withAdmin Mode can log in remotely.
* Network: If checked, remote access authorization will be given.
* Multi-access: If checked, multi-users with
the same user name can log in remotely at the same time.
*Minimize: An authority that can minimize S/W.
Time Set :
Its a function that enables Administrator to set time for certain users to log in only for the time allowed.

55

Audio Video Recorder

Users Manual (5.1.4.0)

CHAPTER 2
View Log Application (Status)

2.1 Screen Features

Recording Camera: It shows recording status.
Sensor Detection: It shows sensor detection status.
Motion Detection: It shows motion detection status.
Alarm: It shows alarm activation status.
HDD Capacity: It shows HDD capacity used for recording.
Event: It shows events occurred.
Event Log: It shows all the previous events occurred by date.

56

Audio Video Recorder

Users Manual (5.1.4.0)

2.1.1 Event Log
* Date: All dates with events will be marked in
bold numbers.
* List: All events for a certain selected date will be
shown.
* Delete All Logs: If clicked, all the previous
records will be deleted.
* Delete This Log: If clicked, only the events for a
certain selected date will be deleted.
* Refresh: If clicked, events will be updated.
*Print: Print the event log of a selected date.
* Save as: Save an event log of selected
date with text file.

* Network Client Log : Remote login records will be also

kept on DVR server.

57

Audio Video Recorder

Users Manual (5.1.4.0)

CHAPTER 3
Playback Application (Search)

3.1 Search Features 1

Calendar: All dates with recorded data will be marked in bold numbers.
Blur/Sharp/Normal: Buttons to adjust sharpness of image
Zoom: Buttons to zoom in/out
Brightness: buttons to adjust brightness
Contrast: buttons to adjust contrast
Default: Default for Zoom/Brightness/Contrast

3.2 Search Features 2

3.2.1 Playback

Clicking right mouse on Time bar for Browse and select a folder containing backup data
58

Audio Video Recorder

Users Manual (5.1.4.0)

For playback, simply select date, screen mode (1, 4, 9, 16, etc.), time by one click on
the time bar and click the play button.
What different colors mean on the time bar:
1. Blue: Recorded data by sensor & motion detection
2. Purple: Recorded data by 24-hour-recording
3. White: No recorded data in all cameras
4. Gray: No recorded data for some cameras
5. Green: Blue + audio
6. Light Green: Purple + audio
7. Dark Red : Purple + recorded text data (POS)
8. Orange : Even- recorded data with recorded text data.
9. Dark Yellow : Event-recorded data + recorded text data + audio
10. Yellow : Purple + recorded text data + audio

Stop

Play Backward * 2

Play

Play * 2

Play Backward

Event/Object/text/People count search

Move to the First Data

Move to the Last Data

Move1 Frame Backward

Move 1 Frame Forward

3.2.2 Event/Object/Text /People Count Search

[Event Search]

Click the Event/Object Search button and select

Event.

59

Audio Video Recorder

Users Manual (5.1.4.0)

Select channels for Event Search.

Select one event from the event list and click OK,
and the selected event will be displayed. Click
Refresh to update the list.

[Object Search]

Object Search is only to search certain selected objects for a certain period of time.
Scan: Set the time period for object search
Motion Detection Zone: Select Set and mark areas for object search by dragging
mouse. Clear is used to erase certain areas inside motion detection zones.
Sensitivity: Set motion detection sensitivity level.
Clear All: Click on it to clear all the motion detection zones set.

60

Audio Video Recorder

Users Manual (5.1.4.0)

[Text Search ]
It is to search POS text data with image according to selected time period and item.

Put in an item (Reference), select time period and click on Search, and a list with
transactions will be displayed.
-

Searched words will be retained in the combo ox in down-list format so the

data can be easily shown in next serch.

61

Audio Video Recorder

Users Manual (5.1.4.0)

[People Count Search]
It is to search people count statistics according to selected time period & camera.
Through this function, the results of people count and POS transaction can be analyzed by the
hour and cameras.

Select date, camera & time, and statistics will

be shown as below.
Statistics can also be saved as text file.

* People Count Search

1. Transaction Count: Counting when DVR gets data from POS.
2. People count: Counting people in certain zones.
* People Count Statistics
1. Camera/Hour: Select camera and hour wish to search
2. Start/End: Select date wish to search
3. Total Transaction: Results after searching transaction count in total
4. Total Count: Results after searching people count in total
5. Search: Click it to start search
6. Delete/Delete All: To erase data in statistics
7. Report: To save it in text file
62

Audio Video Recorder

Users Manual (5.1.4.0)

* How to read data and graph

1. Counted number of (T)ransaction/ Counted number of (P)eople count
2.
Red Color: Rate of people count
Green Color: Rate of Transaction
The Pie Graph will show at a glace how many transactions have been performed, compared to
the number of people counted.

\
63

Audio Video Recorder

Users Manual (5.1.4.0)

3.2.3 Monitoring & Searching

It is a feature that enables user to view live video while searching recorded data.

Click the right mouse and select Monitoring On to

view live video. Click the right mouse again and select
Monitoring Off to go back to Search Mode.

64

Audio Video Recorder

Users Manual (5.1.4.0)

3.2.4 Bookmark & Go To

Bookmark (Favorites): Added data from

Object Search are stored here.

Go To: Select desired time to search and click

OK.

3.2.5 Save

Watermark(Image)
Using Watermark(Image): To attach a certain logo or special
picture on AVI file.
AVI: For saving motion pictures and audio
BMP: For saving images. Watermarked images can
be saved.
JPEG: For saving regular still images. Quality is not
as good as BMP but less HDD is used.
Save in JPEG with Time Period: For scheduled save in
JPEG

65

Audio Video Recorder

Users Manual (5.1.4.0)

z Watermark Setting
Select each for desirable watermark
setting.

Click on Browse to find

watermark image or
logo.

66

Audio Video Recorder

Users Manual (5.1.4.0)

[Save in AVI Format]

Click Start to start saving and Stop to

stop saving.
Mute: Saving video only (no audio)
High Speed: Saving in high speed
Click time period settings and put the time
period that you want to save.

67

Audio Video Recorder

Users Manual (5.1.4.0)

[Save in BMP
Format]

Click Start and select BMP as you save images.

Saved images can be checked using Watermark
Proofer.

[Watermark Proofer]

Execute Watermark Proofer and check if

certain saved images are forged or not.

68

Audio Video Recorder

Users Manual (5.1.4.0)

[Save in JPEG Format]

[Save in JPEG with Time Period]

Click Start and select JPEG as you save images.

Select time period and select channels to be saved
in JPEG.

3.2.6 Print

Click the Print button and follow the same printing procedure as you would normally print out documents.
69

Audio Video Recorder

Users Manual (5.1.4.0)

3.2.7 Backup

The recorded data can be copied from the hard disk to external storage devices, such as CD-R, DVD.

Back up recorded data using various backup devices.

3.2.7.1 DFS Back up

70

Audio Video Recorder

Users Manual (5.1.4.0)

DFS: Save in DFS file format.

Dialog: Show the directory of burning software (ex.Nero Burning)
External CD Burning Program: User can run the other CD burning program such as Nero burning.
After successfully back up the file, user can burn the data onto CD.

71

Audio Video Recorder

Users Manual (5.1.4.0)

Select Time Period : Specify time period for backup. The minimum period for
backup is 1 minute.
If password is set, viewing backup data will be possible only when it is typed in.
Backup Folder : Click the Browse button, select a drive to back up and enter a
desired folder name.

72

Audio Video Recorder

Users Manual (5.1.4.0)

Play CD-Burning: Check to burn the backup data through an external Burning
program.
Log File: Shows Backup Start Time, Directory, Status-fail or Success.

73

Audio Video Recorder

Users Manual (5.1.4.0)

3.2.7.2 EXE Back up

Any recorded data can be saved as .exe file. No viewer program is required to see saved data.
Note : 1. file size limited up to 1 GB.
2. 1 channel backup only.

74

Audio Video Recorder

Users Manual (5.1.4.0)

1.
2.
3.
4.
5.
6.

Select EXE File.

Specify time period, password, drive, etc.
Select ONE channel to back up.
Specify file size up to ONE GB. If it is larger than 1GB, multiple exe files will be created.
Tick the Once Make EXE File box to create only one file with the file size specified.
Double-click the exe file created to see data.

75

Audio Video Recorder

Users Manual (5.1.4.0)

76

Audio Video Recorder

Users Manual (5.1.4.0)

3.2.7.3 Run CD Burner ( For Non Windows XP Users)

1. Install bundle CD and install INCD.

3.After installing INCD, run InCDL.exe which is the INCD Launch Program.
4. Insert a blank RW CD and then start formatting it (If it is a brand-new one, click Format instead of Quick
Format).

77

Audio Video Recorder

Users Manual (5.1.4.0)

78

Audio Video Recorder

Users Manual (5.1.4.0)

5. Leave the AVR Program and insert the blank RW CD which has been formatted.
6. Select Backup and click Next to start.
7. Select time period & password and click Browse to create a folder.

79

Audio Video Recorder

Users Manual (5.1.4.0)

80

Audio Video Recorder

Users Manual (5.1.4.0)

3.2.7.4 Run CD Burner ( For WindowsXP Users Only)

Windows XP users can back up data directly in a CD without exiting the AVR Program.
1. Tick the Save in CD data of backup box and click Next.

81

Audio Video Recorder

Users Manual (5.1.4.0)

2.
3.
4.
5.

Select Time Period : Specify time period and password.

Select CD-RW drive.
Create folder name if it should be used and click Next.
CD information will be shown as below.

82

Audio Video Recorder

Users Manual (5.1.4.0)

6. Select 1 channel to back up.

7. Identify the maximum file size indicated. An attempt to back up more than the size
indicated will result in a failure.

83

Audio Video Recorder

Users Manual (5.1.4.0)

8. After completing back up, find the files created in the CD.

84

Audio Video Recorder

Users Manual (5.1.4.0)

3.2.7.5 Playback
1.
2.

Click the Start button and run the DVRs Playback Program.
Select a folder (subfolder) to see saved data.

85

Audio Video Recorder

Users Manual (5.1.4.0)

CHAPTER 4
Remote Monitoring System
4.1 Remote Client Installation
4.1.1 Using AVR S/W

Double-click
AVR(5.1.0.0).exe.

Select Manual
Installation.

Select AVR Client

only.

86

Audio Video Recorder

Users Manual (5.1.4.0)

4.2.1 Using Web Browser

1. Type in the IP address of DVR server.

2. Log in first before downloading

Remote Client Program.

87

Audio Video Recorder

Users Manual (5.1.4.0)

4
5
6

9
10

2
1, Live View
2. Screen splits and channel selection
3. PTZ control : Only users with proper authority to control PTZ remotely.
4. Advanced: Controlling preset, tour and E-map only for authorized users.
5. Speed: PTZ speed control
6. To save live image to JPEG
7. To listen Audio of a selected channel applied only for authorized user remotely
8. Mode change between Live and Search
9. Log In/Out or EXIT
10. Display web browser information.

88

Audio Video Recorder

Users Manual (5.1.4.0)

3
4

1, Searched Image
2. Selection for image search
3. Play back(Fast back, Back, Stop, Play, Fast Play)
4. Save: AVI, JPEG, BMP
5. Audio
6.To change Tab to CONTROL
7.Log out and go back to LOG IN page

89

Audio Video Recorder

Users Manual (5.1.4.0)

3. Click the Install Remote Client

button for downloading.

90

Audio Video Recorder

Users Manual (5.1.4.0)

5. Click Next
to proceed.

6. Select Manual
Installation.

91

Audio Video Recorder

Users Manual (5.1.4.0)

7. Click Next to finish

installation process.

92

Audio Video Recorder

Users Manual (5.1.4.0)

4.2 Remote Client Program Execution

Double-click on the AVR Client icon on the

desktop to execute Remote Monitoring System (Client).

Click Add to register DVR servers.

Note: Make sure to put the same

Port No. as DVR server.

93

Audio Video Recorder

Users Manual (5.1.4.0)

There can be more than one DVR server registered. Select one from
Servers, click on Login and type in password to log in.
* Edit: Login info. changes can be made here.
* Delete: Registered servers can be deleted with one click.

Full Screen Display on Event: If checked, full screen will be

displayed on events.

94

Audio Video Recorder

Users Manual (5.1.4.0)

4.3 Remote Save and Backup

The instant AVI file save of real time video can be done remotely.
1. Click the right mouse to start saving.
2. Click the right mouse to stop saving.
Remote Backup can also be done.
The same procedure is used as DFS Backup.

95

Audio Video Recorder

Users Manual (5.1.4.0)

4.4 Real Time Audio

Click the right mouse and select Enable Audio to hear real time audio.

Note: Changing Setup remotely can be done if remote user is Admin or Admin Mode.

96

Audio Video Recorder

Users Manual (5.1.4.0)

Appendix 1
POS DVR

TABLE OF CONTENTS

1.1 Hardware Installation

1.1.1 Parts
1.1.2 Installation
1.2 Software Installation
1.2.1 Installation & Setup

97

Audio Video Recorder

Users Manual (5.1.4.0)

1.1 Hardware Installation

1.1.1. Parts
5
1

98

Audio Video Recorder

Users Manual (5.1.4.0)

Part Names

1.RS232 Serial Cables

(Cross & Direct)
2. RS232 Serial Cable
3. RS232 Serial Cable
4. RS232 Serial Converter
(9 pins into 25 pins)
5. Gender Changer
6. #1 + #4 + #5
7. DVR
8. POS Printer
9. Point of Sales (POS)

99

Audio Video Recorder

Users Manual (5.1.4.0)

1.1.2 Installation

Part # 2 goes into the COM

Port 1 of Part # 7.

Part # 1 goes into the serial port

of Part # 8.

Part # 3 goes into the serial port

of Part # 9.

100

Audio Video Recorder

Users Manual (5.1.4.0)

Appendix 2
I-phone

TABLE OF CONTENTS
2.1 Installation
2.2 Execution
2.3 Audio Setup

101

Audio Video Recorder

Users Manual (5.1.4.0)

2.1 Installation

Any system used for Two-way Communication must have

static IP and iphone(1.0.1.0).exe must be installed.
For
I-phone
installation,
double-click
on
iphone(1.0.1.0).exe.

Click Next to start installation process and

select Automatic Installation.

102

Audio Video Recorder

Users Manual (5.1.4.0)

Click Finish to complete the process.

2.2 Execution

Go to Start, All Programs, find I-phone and

select it for execution.

Find the I-phone icon at the right bottom and click

it for the next step.

103

Audio Video Recorder

Users Manual (5.1.4.0)

Select Call for Two-Way Communication, type in IP address and click Connect.

Property: The default port number is 8015 and

the default timeout value is 5 seconds.
Leave them as they are unless other values
must be used.

2.3 Audio Setup

Go to Control Panel, Sounds, Speech and

Audio Devices and Sounds and Audio Devices.
Then, go to Audio, Sound playback and click
Volume.

104

Audio Video Recorder

Users Manual (5.1.4.0)

Recording Control should be set up this way.

105

Audio Video Recorder

Users Manual (5.1.4.0)

Appendix 3
MDVR

Installation

Overview

Execution

106

Audio Video Recorder

Users Manual (5.1.4.0)

Installation
Start: Click Next to start installation process.

Selection of Installation Method: Select Automatic Installation.

107

Audio Video Recorder

Users Manual (5.1.4.0)

On Installing

Finish: Click Finish to complete installation.

108

Audio Video Recorder

Users Manual (5.1.4.0)

Overview

Multi-site
Management

Exit

Search

Site
Name

Screen
Mode

PTZ
Camera
Control

Setup

Live Viewing

E-Map

Event

Properties

Log in & Log

out

109

Audio Video Recorder

Users Manual (5.1.4.0)

Execution
Properties

Click on the Properties button to register group and site.

Registration Steps:
1. Click Add group to make group. One group can have up to 64 sites
(cameras).

110

Audio Video Recorder

Users Manual (5.1.4.0)

2. After making all groups, select a group to register sites.

Click on the Add site button.
3. Type in all the required info. as below. Make sure to put in the same user and password
used on DVR.
4. Repeat the above steps to register more sites.

111

Audio Video Recorder

Users Manual (5.1.4.0)

Log in & Log out

Click on the Log in button to log in.

112

Audio Video Recorder

Users Manual (5.1.4.0)

Setup

By ticking the box, camera name,

status, and POS text will be displayed
on camera picture.
By ticking the box, MDVR user and
password will be asked in the event
of the execution of MDVR.
By ticking the box, Alarm will be
worked in the case of event. Check the
box for use and select an audio file
in

Change

Alert

as

detail

in

Properties.

By ticking the box, you are able to

set each event which you want to be
reported from local DVR.

113

Audio Video Recorder

Users Manual (5.1.4.0)

By setting a time, event log will be

remained in Event tab.

114

Audio Video Recorder

Users Manual (5.1.4.0)

Event

Event displays all the events coming in from registered DVRs.

Select a site and click on the right mouse to connect.
115

Audio Video Recorder

Users Manual (5.1.4.0)

Search

Search Steps:
1. Select date from the calendar.
2. Select time from the time bar.

116

Audio Video Recorder

Users Manual (5.1.4.0)

Save

Image can be saved either in BMP File or in JPEG File

117

Audio Video Recorder