Scribd
Upload
296 views2 pages

Interpon 700 AM

Charakterystyka produktu

Uploaded by

Tomasz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
296 views2 pages

Interpon 700 AM

Charakterystyka produktu

Uploaded by

Tomasz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Product Datasheet

BU Powder Coatings
Interpon 700 AM
The information given in this datasheet is generic for the range Interpon 700 AM. Specific products within the
range can vary from the generic. For these products individual product datasheets are available
Product Description

Interpon 700 AM is a series of epoxy/polyester hybrid powder coatings offering the benefits of Interpon 700
in combination with specific antibacterial activity.
Interpon 700 AM powders are available in a full range of colours, in gloss, reduced gloss, textured and other
special finishes or can be custom matched to the users requirements.

Powder Properties

Chemical type
Particle Size
Specific gravity
Storage
Shelf life
Sales Code
(a)
Stoving schedule
(object temperature)

Epoxy/Polyester
Suitable for electrostatic spray
1.2 - 1.7 g/cm depending on colour
Dry cool conditions below 25C
12 months
E-series
15 30 minutes at 170C
10 20 minutes at 180C
6 12 minutes at 200C

(a) For high reactivity (HR) powders see overleaf


Test Conditions

The results shown below are based on mechanical and chemical tests which (unless otherwise indicated)
have been carried out under laboratory conditions and are given for guidance only. Actual product
performance will depend upon the circumstances under which the product is used.
Substrate
Pretreatment
Film Thickness
Stoving

Mechanical Tests

Flexibility
Adhesion
Erichsen Cupping
Hardness
Impact

Chemical and
Durability Tests

Salt Spray
Constant Humidity
Distilled Water
Immersion
Exterior Durability
Colour Stability at
elevated temperatures
Chemical Resistance

Interpon 700 AM - Issue 2


Issued 04/08/2011

0.8mm Steel panels


Mechanical:Lightweight Iron Phosphate
Chemical & Durability:lightweight Zinc phosphate
50 70 microns
10 minutes at 180oC (object temperature)
ISO6860
(Conical Mandrel)
ISO2409
(2mm Crosshatch)
ISO1520
ISO1580
(4000gms)
ASTM D2794

Pass 3mm
Gt 0
Pass >7mm
Pass - no penetration to
substrate
Pass 25 Kgcm direct and
reverse

ASTM B117
Pass - no corrosion creep
(250 hours)
more than 2mm from scribe
ISO6270-1: 1998(E)
Pass - no blistering or loss
(240 hours)
of gloss
ISO2812
Pass - no blistering or loss
(240 hours)
of gloss
Not recommended for exterior use. Chalking after 6-12 months continuous
outdoor exposure. Protective properties not impaired
Good - satisfactory for continuous exposure up to 125 C
Generally excellent resistance to most acids and alkalis and oils at normal
temperatures.

Interpon 700 AM

Pretreatment

Aluminium, steel or Zintec surfaces to be coated must be clean and free from grease. Iron phosphate and
particularly lightweight zinc phosphating of ferrous metals improves corrosion resistance.
Aluminium substrates may require a chromate conversion coating.

Application

Interpon 700 AM powders can be applied by manual or automatic electrostatic spray equipment. Unused
powder can be reclaimed using suitable equipment and recycled through the coating system.

Additional
Information

Interpon 700 AM in conjunction with BioCote Ltd has been tested for antimicrobial efficacy versus the ISO
22196: 2007 and exhibited a minimum of 95% and up to 99.99%v reduction in bacterial population, classified
as microbiological results satisfactory. Testing by Biocote Ltd is carried out by an independent laboratory
and has included the following bacteria:
Listeria monocytogenes
Escheria coli 0157
Salmonella enteritidis
Staphylococcus aureus (resistant strain)
Bacilus subtilis
Pseudomonas auruginosa
Salmonella typhimurium
Streptococcus faecalis
Legionella pneumophila
Enterbacter aerogenes
Interpon 700HR (High Reactivity) powders are also available for use where a lower stoving temperature or
shorter curing schedule is required.
Sales code:
F-series
Stoving schedule:
15 30 minutes at 160C
(Object temperature)
5 10 minutes at 180C
Shelf life:
6 months
For further details on powder properties and film performance of Interpon 700HR please contact AkzoNobel.

Safety Precautions

Please consult the Material Safety Datasheet (MSDS)

FOR PROFESSIONAL USE ONLY


IMPORTANT NOTE The information in this data sheet is not intended to be exhaustive and is based on the present state of our
knowledge and on current laws: any person using the product for any purpose other than that specifically recommended in the
technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does
so at his own risk. It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules
and legislation. Always read the Material Data Sheet and the Technical Data Sheet for this product if available. All advice we give or
any statement made about the product by us (whether in this data sheet or otherwise) is correct to the best of our knowledge but we
have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product.
Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for the performance of the
product or for any loss or damage arising out of the use of the product. All products supplied and technical advice given are subject to
our standard terms and conditions of sale. You should request a copy of this document and review it carefully. The information
contained in this data sheet is subject to modification from time to time in the light of experience and our policy of continuous
development. It is the user's responsibility to verify that this data sheet is current prior to using the product.
Brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel

AkzoNobel Powder Coatings Ltd. Worldwide Powder Group. Stoneygate Lane, Felling, Tyne & Wear. NE10 0JY. UK.
Tel: +44 (0) 191 469 6111
Fax: +44 (0) 191 438 5431
www.interpon.com
Copyright 2010 AkzoNobel Powder Coatings Ltd.
Interpon is a registered trademark of AkzoNobel
Interpon 700AM - Issue 2
Issued: 04/08/2011

You might also like