imfd full

manual

written by: mark lieberbaum

playbacks 1-3 and 5-7: mark lieberbaum
playback 4: tom roach

Interplanetary MFD
Forward:
I have made this manual and tutorial package so that everybody can learn how to perform
complex navigation maneuvers, such as interplanetary transfers, direct ascents, and direct
reentries. Credit goes to jarmonik, the programmer and creator of Interplanetary MFD,
who did an extraordinary job to create one of the most powerful and useful MFDs in
existence. Also, I used text from his IMFD manuals in this manual. Credit also goes to
Tommy for several thingsproofreading this manual and tutorial package, helping me
figure out complex navigation maneuvers, helping me find more efficient ways to use
IMFD, and making the playback for IMFD tutorial #4Moon to Earth. And of course,
credit goes to Dr. Martin Schweiger, without whom we would not have Orbiter. With
this manual and tutorial package, I hope that anybody who wants to can fly to other
planets, moons, and space stations and explore the solar system in a way they can only do
in their dreams. Please, if you have any questions or suggestions for a future release,
please do not hesitate to contact me via PM on orbiter-forum.com and I will do my best
to help you with whatever it is you need. So, are you ready to explore the solar system?
Get flying!

Table of Contents
Interplanetary MFD Background Information...................................................................................6
Start Key Selection.............................................................................................................6
Color Configuration.............................................................................................................6
Setting Values from the Keyboard......................................................................................6
Sharing Flight Plans............................................................................................................6
3D Rotation.........................................................................................................................6
Time in GET and UT...........................................................................................................6
What is EIn? .......................................................................................................................6
What is RIn? ......................................................................................................................7
Information Flow.............................................................................7
LambertAP Mode................................................................................................................8
Sources, Targets, and References.....................................................................................8
Burn Guidance....................................................................................................................8
Burn Integrations.................................................................................................................9
Burn Timing.........................................................................................................................9
Burn Guidance Modes.10
Burn Vector View..12
IMFD Configuration Page..14
Map Program16
General Information..16
Button Layouts/Descriptions19
Map Configuration Page..22
Text Modes24
Map Program Displays.25
Course Programs29
General Information..29
Target Intercept Program...30
General Information..30
Burn Guidance Modes.31
Transfer Types..32
Button Layouts/Descriptions34
Target Intercept Program Displays37
Offsetting the Target.41
Tangential Transfer Program.42
General Information..42
Tangential Transfer Program Display42
Text Items..42
Planet Approach Program.44
General Information..44
Planet Approach Program Display.44
Text Items..45
Orbit Insert Program46
General Information..46
Orbit Insert Program Display...46
Delta Velocity Program...47
General Information..47
Delta Velocity Program Display..47
Text Items..47

Orbital Program49
General Information..49
Button Layout.49
Circularize Orbit Mode.50
Match Velocity Mode51
Find Target Mode..52
Surface Launch Program...53
General Information..53
Button Layout.54
Surface Launch Program Display..55
Text Items..55
Orbit Eject Program....57
General Information..57
Orbit Eject Program Display58
Text Items..58
Base Approach Program60
General Information..60
Orbit Insert Mode..62
Reentry Mode64
Slingshot Program...66
General Information..66
Slingshot Program Display..67
Slingshot Program Text67
Appendix A: Glossary for Acronyms used in IMFD69
Appendix B: Keyboard Commands..72
Appendix C: Common Flight Source, Reference, and Target Settings..73
Appendix D: Summary of Programs, When to use each Program..77
Appendix E: Navigation Maneuver Checklists82
Appendix F: The Major Dos and Donts of IMFD with secrets to make your life easier..89
Appendix G: Playback In-flight Notes..91

This Page Intentionally

Left Blank

Interplanetary MFD
Interplanetary MFD is one of the two powerful navigation tools in Orbiter (the other one
being TransX MFD). IMFD is a flight navigation computer designed to accomplish almost any
navigation feat that you might want to achieve.
Start Key Selection
You can define the key that is used to open this MFD. The IMFDKey variable can be edited in the
IMFD.cfg file. Key codes are listed in an orbitersdk.h and the default setting is I
Color configuration
IMFD allows colors to be configured by configuration file. The file is located in Config folder and
the file is named IMFD.cfg. The same file will be used at least by BaseSyncMFD.
Setting values from keyboard
You can set up values in a many forms from the keyboard by pressing the [Set] button. The
exponent form can be used. Examples are 12.4e3 or 11.45e-2. Also the exponent can be
replaced by a letter like 12.4k or 33.2M or 22.2G where k is equal to e3 and so on. d=day
and it will multiply the input value by 86400. h is equal to an hour, and a is one astronomical
unit.
Sharing Flight Plans
A Single flight plan can be "shared" between multiple MFDs by setting IMFD into remote access
mode by pressing [PG] button in the main menu. A popup window will ask for an ID code of the
MFD being accessed. The ID code of an MFD is shown in the top right corner of the MFD. The
flight plan will stay in the MFD it is planned in even if the MFD containing the flight plan is closed
so the other MFDs can access the plan. If you want to disconnect one MFD from another just
input an invalid ID, which could be the ID of the MFD itself or just a random number that is not an
ID of an open IMFD. When using two IMFDs they cannot access each other. For example, when
using two MFDs, only one of them can use remote access to access data from the other.
3D Rotation
Some of the programs support 3D rotation via mouse. Hold down shift and spacebar OR shift and
the Z and L keys to rotate the display. Currently supported programs are: Target Intercept, Planet
Approach. Only the Left and Right MFD displays can be rotated. To get the display back to
normal, hit the PRJ button on the MFD you just rotated.
Time in GET and UT
It is possible to enter dates in UT format like UT 14-nov-1969 or with the 24h clock UT 14-nov1969 17:45:21.1 Used names for the months are Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep,
Oct, Nov and Dec (not case sensitive). IMFD 5.0 supports GET (Ground Elapsed Time).
This feature can be activated from the configuration page. Also the date of launch must be
specified. You can enter data in GET format by pressing the [Set] button and entering the time
GET 120:34:56.7. When flying with AMSO IMFD will receive GET time via the inter-processcom link.
What is EIn?
In IMFD EIn is used to express angle between the current velocity vector and the vector of the
targets orbital plane. However, it is not the same as relative inclination between orbital planes.
Typical situations are: How much the escape vector is out of the source plane, how much the
target is out of the source plane, and how much the vessel is out of the target plane. In other
words it presents an alignment or a launch window. Basically, EIn is to interplanetary flights as
RIn is to Lunar/Space station flights.

EIn, Orientation of the lunar orbit doesnt matter here

What is RIn?
RIn is a relative inclination it used to display the angle between orbital planes. The target plane is
always one of these planes. And the other one is either the source plane (green) or the plane of
the hypothetical transfer orbit (purple). In many situations it presents the magnitude of the plane
change in degrees.
Information Flow
IMFD contains separate programs for transfer, slingshot, orbit-eject, trajectory plotting, and burn
control. There is some information transferred form one program to another, beginning with the
transfer programs and ending in the trajectory plotting and burn control.

Information Flow in IMFD

LambertAP Mode
This option specifies the primary operation mode of the guidance system of the IMFD. There are
two options availableIMFD and ApolloP30. The setting will affect the reference frame of the
Burn Vector view, powered flight attitude control, behavior of the Autoburn, and trajectory
prediction of the map program. In IMFD powered flight, steering uses constant pitch and yaw
angles respect to velocity vector of the vessel. Delta velocity is displayed relative to the velocity
vector in the thrust monitor. The ApolloP30 is the AGC P30 compatibility mode that uses a
constant attitude in the global frame during burn. Delta velocity is displayed in a compensated
local vertical system as P30 input requires. Autoburn tries to operate as P30/40 does. Basically,
just leave the mode in IMFD mode; it will get you where you want to go.

Fixed attitude and velocity relative attitude

Sources, Targets and References
For correct operation of the transfer program, the source, reference and target must be correctly
defined. The reference and source objects are automatically set after setting the target. So, start
the flight plans by setting the target first. If necessary the reference and source can be manually
overridden. If for some reason the source of the target is incorrectly defined an error will be
displayed. To be able to generate an escape vector the source must be set to the planet being
orbited (planet you start at). By setting the source to x, the current ship will be selected. When
using IMFD the target must be always defined, otherwise the ecliptic is targeted automatically.
There are some special targets availablesee the Map program section for more details. Space
stations can be targeted and sometimes they can be used as a reference objects but a space
station cannot be a source object. Target [TGT] and reference [REF] selection buttons are in a
left edge of the MFD and the source [Src] button is in a second button page in a right edge.
Change the page with [PG] button. A list of Reference, Target, and Source settings for various
flights is available in Appendix C.
Burn Guidance
Most of the programs are capable of generating burn data. The data will appear in the lower left
corner and there is a Time to Burn (TtB) item and remaining Burn Time (BT) item. After the (BT)
there might be (PG) or (RG) flags. Those will indicate that the burn is a pro-grade (PG) or a retrograde (RG). If the flag is not present the burn will use a burn vector and you must use a cross hair
tool to setup the attitude of the space craft. The cross hairs will appear when pressing [BV]
button. Also the autoburn will complete the burn automatically, so there is no need to play with
the cross hairs unless Autoburn acts crazy, which is not likely. The autoburn can be activated and
deactivated by pressing [AB] button. When using spacecrafts that rotate slowly you may want to
decrease an attitude control speed from IMFD.cfg, which would be AP MAX ANG VEL which is
the maximum angular velocity when Autoburn controls your attitude (rad/sec).

Burn Integrations
In IMFD burn integrations are used to improve the accuracy of the burns. Typically in a transfer
calculation, it is expected that the delta velocity is gained at once with no burn time at all. This is
the initial burn executed in the initial position. However, in reality, the time of the burn must be
taken into account somehow. The easiest way is to reduce half of the estimated burn time from
the initial burn position. Thus, that would be the actual position where the engines should be
started. The ship will end up, almost but not exactly, in the right direction. The grey sector in the
picture below shows this method. In the burn integrations, numerical methods are used to
calculate the burn position more accurately, so that the ship ends up in a trajectory that matches
the initial target trajectory as well as possible. This technique is used with the Pro- and Retrograde burns. The green sector displays this technique in the picture below.

Idea of burn integrations

Burn Timing
If for some reason above integration fails, the burn position will start jumping all over the place.
Due to the experimental nature of this method it is possible to control it from the IMFD Menu by
pressing [PRJ] button. If this happens in Base Approach, try changing the Num value.

Burn Guidance Modes

Prograde Guidance Mode

This will definitely fix the problems with long burns in low earth orbits. This method OR Off-Axis
Mode is a good choice in many long burn situations. The idea of this method is to adjust the burn
position and burn time so that the velocity to be gained will be equal to the velocity of the vessel
at engine cut-off.

Figure 1: Prograde burn mode

Realtime Guidance Mode

Realtime mode is designed for short duration course correction maneuvers. The maneuver can
be considered to be short when the traveled central angle (the Reference Planet being the vertex)
during the burn is very small. Realtime mode is improper in long duration low orbit maneuvers like
the TLI burn, although it can be used with no problems. In this mode, the software computes the
target velocity vector in realtime and the vector changes its magnitude and direction while the
vessel moves forward. This mode is recommended for any type of mid-course corrections.

10

Off-Axis Guidance Mode

Off-Axis mode is specially designed for the Apollo TLI burn. This mode applies some thrust for all
3 axes and can be used even if the orbits are not perfectly aligned. This mode will compute a
numerical solution to place the vessel in target trajectory. This mode requires that the time to
ejection (TEj) is higher than 3 seconds. Below the 3 seconds the program no longer generates
new information for the burn execution programs (Autoburn / Thrust Monitor Program) as during
this time they are preparing to execute the burn. This mode is recommended for long duration low
orbit maneuvers like TLI, TEI, Orbit Insertions and Orbit Ejections.

11

Burn Vector View

Burn Vector View displays more detailed information about a burn. The contents of this display
depend on the guidance mode (realtime, off-axis or prograde). When using realtime mode, only
applied and remaining delta velocity are displayed. Remaining delta velocity is computed
by flight software in realtime. In other modes the delta velocity is numerically computed and
predefined for the burn. You can select the reference frame used in burn vector view from the
configuration page. You really do not need to worry about the technical information that follows,
but know that the most important thing is Tot (Total dV) under dV remaining. This is the total
amount of dV in meters/second left in the burn.
dV Applied
This section displays the delta velocity that is sensed by onboard equipment. It is integrated from
the thrust generated by thrusters over time. dV Applied can be reset by switching the Autoburn
[AB] on and off.
dV Required
This section displays required total delta velocity. This section is displayed only if exact
values are known, not in a realtime mode.
is equal to numerically
integrated accelerations over time.
dV Remaining
This section displays the remaining delta velocity. It is total delta velocity minus applied delta
velocity. This is the most important displayit shows how much more Delta Velocity you must
burn.
Local Vertical
Defines a reference system where the z-axis (dVo) points away from the planet.
. The
y-axis (dVp) points direction of orbit normal. The x-axis, or (dVf), points to the horizontal direction
of flight.
Local Velocity Frame
Defines a reference system where x-axis (dVf) is pointing prograde direction.
. y-axis
(dVp) points in the direction of orbit normal and z-axis (dVo) points outbound direction
.

12

Burn Vector View:

Course Program

Target

Velocity Frame
Mode

Source

dV Applied Data

dV Required
Data

dV Remaining
Data

Rotation
Position cross

Target for Burn

View Vector

Time until burn

Burn Time

Reference

The cross represents your rotation position. Rotate your vessel towards the cross.
When the cross turns grey, you are rotated to the correct attitude and you can start your burn (if
you want to do it manually). Autoburn will automatically rotate you and automatically perform the
burn for you. In dV Applied, dV remaining, and dV Required, dVf is the x-axis, dVp is the y-axis,
and dVo is the z-axis, and Tot is the total delta velocity.

13

IMFD Configuration Page

Nodal Regression enables regression computations for source and target orbits.
Mission Timer specifies what mode of date you use, GET or MJD.
Timer Start MJD specifies the start date of the GET timer. If the date is not valid GET feature will
be automatically disabled.
LambertAP Mode specifies primary operation mode of the guidance system. See details on page
2.
Landing Target option is used to define an additional target such as a ground base. This option
is currently used by only the Map Program.
Time Of Landing specifies time of landing. This option is used predict an alignment of ground
base and it's only used by Map Program.
AutoBurn Maxrate specifies maximum angular velocity used in autoburn.
Glass Cockpit Mode When this mode is NO, Arrows are on the right hand buttons and their
commands are displayed in the MFD. When this mode is YES, the commands are directly
displayed on the right hand buttons.
Entry Intrf.Alt specifies default setting for atmospheric entry interface altitude.
AB RCS Threshold Specifies remaining DV at which point the Main Engines cut off and the rest
is done with the forward translational thrusters.
AB Throttle Down Specifies remaining DV at which point the Main Engines are commanded to
begin throttling down.

14

Parking Orbit Altitude Altitude at which all programs use for parking orbits before transfers.
Secure cut-off is a feature used by Map program. If it's enabled, the trajectory will be plotted in
the Map by using pre-computed engine cut-off state vectors that are created by navigation
programs. If it's disabled, the Map program will "simulate" the burn using engine thrust
parameters and thrust vector.
Propagate TEj enables numerical ignition state vector propagation. P30 Comp Mode is used only
by NASSP 7 beta. This setting must be "1" when used with NASSP 7 beta (March 22. 2009 or
later). And "2" is used when used with older beta versions. It will control direction of P30
compensation. Consider switching to this option if the TLI burn attitude is incorrect.

It is best to leave all items in their original setting except the following:
Mission, Timer Start MJD, Autoburn Max Rate, Glass Cockpit Mode, Entry Interf. AB RCS
Threshold, AB Throttle Down, and Parking Orbit Altitude.
If your ship keeps rotating and never getting to the correct burn attitude (attitude thrusters keep
firing and the ship keeps spinning like crazy) when you hit [AB] (ie the RCS thrusters provide a
low angular accelerationgood examples are Vespucci and Deepstar) you might want to turn
Autoburn Max Rate down. Or, you could open burn vector view, manually rotate towards the
cross, then hit Autoburn.

15

Map Program
The Map Program is a general display used for monitoring the ships course and predicting an
approach to target planets. It allows the user to view entire solar system as well a single target.
The map program uses planet to planet calculated trajectories. The trajectory is no longer limited
to ellipses and hyperbolas now; it can be displayed over multiple references regardless the
distance or influence the reference causes. The user has the ability to control the speed and
accuracy of the trajectory engine. The modifications can be made from the configuration page. All
modes will provide a great accuracy for interplanetary missions. Update rates as high as over ten
times per second can be archived with out a significant system load with an average home
computer.
The Core
The core uses the Encke-Fehlberg methods which allow a high speed trajectory prediction. In this
version of the trajectory engine the graphical steps and the numerical integration steps go side by
side. So, increasing a step size will lower the graphics quality. It would be possible to use a high
order integration method with a long time step to compute the trajectory, and use sub-integrations
to increase the graphics quality. That would be more complicated and it would not significantly
increase the overall performance. So, a lower order method with a lower step size has been
chosen as a default option. However, the user can select the integration method from Third order
RK3, RK4-Gill, Symplectic 4th Order and RK-Fehlberg methods. Also the Adams-Multton method
is under consideration. Of course, it is possible to create a much faster trajectory predictor but it is
questionable that it does not provide a satisfying reward vs. effort ration. Surely, in the
integrations where graphical plotting is not required, such methods could be used more easily.
Core Configuration
Some of the core functions are configured through the IMFD.cfg file. The LegSize option will
define the size factor for the leg. A higher number will make the legs longer; therefore, the
amount of legs required to compute the trajectory will decrease. The LegsPerFrame option will
define how many legs are computed within every frame. If the frame rate is 80 frames per second
and 20 legs are calculated in every frame, that makes 1600 legs per second. The integrator
option will define the integration method to be used in a prediction.
Centering the display
You can center the display around a desired celestial body by pressing [Cnt] button. Then, you
can type the name of the object you wish to center. The display will move to center on the
objects current position. If you wish the center the display in a future position it can be done but
only for positions and times of periapis passages. You can center the reference planet of the
periapis by writing r- in a front of the name,such as r-Mars, or the command p-planetname,
which will center the display on the point (in the future) of your closest passage around that
planet. Centering a particular periapsis will automatically bring up the text description for that
periapsis (normally you would have to use the [SEL] button to scroll through periapsises to find
the one that you want).
About the Periapis
There can be multiple periapses on a trajectory. The number of available periapses and the
currently selected periapis are shown in the top-left corner such as Pe 1 of 2. Ref Moon is
indicating that the Moon is the reference of this periapis. Only the selected periapis is shown on
the display. Also there are two different kinds of periapis points, strong and weak ones. This
simply means that the strong periapises are located inside the SOI (Sphere of influence). The
weak periapises are located outside the SOI and most likely there isnt a stable orbit in that
position. So, that could be considered to be the position where the ship will by pass the planet at
minimum range. The strong or weak periapsis will be displayed for reference and target planets
only. If the trajectory goes several orbit periods around the reference planet up to six
periapsises/apoapsises can be displayed, but only if One Pe/Ref option is disabled from the
configuration page.

16

The Display Screen

The projected course of the spacecraft will appear in bright green by default, and will appear in
purple when using flight planning mode. The flight planning mode will generate a hypothetical
trajectory based on the information created by some other program. The bright white dot is the
spacecraft itself. The green/purple dot on a trajectory is the periapsis, the closest position to
some object. The orange circle is the target orbit. Sometimes the target is not visible on the
screen. The boxes on a trajectory line are the nodes. The line of nodes (dotted line) will be drawn
between the nodes and the reference planet. That is the position where ships orbital plane and
target orbit intersects. This is also the position for a plane change maneuver. Due to the
numerical computations, the calculations may cause some weird effects on the node positions.
Usually they are located at opposite sides of the reference planet. The information on the screen
is displayed for the periapis positions, NOT for the current position of the ship. The one exception
is when no single periapis is available, and the current position of the ship is used.
Included Plane Change
The Map program will automatically include the plane change at the first node if the (PlC) is
activated. Warning: Sometimes the plane change is required in a prediction but it may cause
failures in a prediction if used in wrong place. You dont NEED the Map Program for a plane
change. You can do it with only the course program.
What is included in Map
All planets included in computations have the following characteristics: a mass greater than 1e20
kilograms (this number can be altered via the configuration page in the Map Programhit [MOD]
until it comes up) and they must orbit the same reference planet as the ship, or orbit the Sun. In
addition, any planet, ship or station that is selected as a reference or a target is also included.
Moons that have a different reference than the spacecraft are not included in trajectory
calculations.
Trajectory Limiters
Due the nature of a numerically computed trajectory, the generation of the trajectory must be
limited somehow, as there is no end point in a trajectory (if nothing is done, your spacecraft will
continue forever unless it collides with a moon or planet). There are two automatic limiters for the
trajectory called Period and Hyperbolic limiters. These limiters will cut the trajectoryotherwise
there would be too much of your trajectory on the screen and the display would look chaotic. You
can configure these limiters in the map program configuration page. The period limiter will limit
the trajectory to one orbital period around the reference object. The hyperbolic limiter will limit the
trajectory to one hyperbolic periapsis relative to reference planet. These automatic limiters can be
overridden manually by setting the time limit, which limits the trajectory in a specified amount of
seconds. That is the most stable if the others fail. So, If the trajectory looks a little strange or short
it may have been limited incorrectly by automatic and you should make some adjustments to the
configurations.
Special orbits
You can also target a special orbit such an ecliptic orbit, an equatorial orbit, or a geostationary
orbit (GEO). The purpose of the ecliptic and equatorial orbits are for relative inclination. IMFD
calculates relative inclination with respect to a target. If you want to have a relative inclination of
30 degrees to the planets or moons equator, set the target to equatorial so when you set relative
inclination to 30 degrees, IMFD interprets this as being inclined 30 degrees to the equatorial
(target you just set). Thus, an equatorial orbit has a relative inclination of zero with respect to the
equator, and an ecliptic orbit has a relative inclination of zero with respect to the ecliptic. Also,
the orbital plane of the reference planet can be targeted. This is good especially when
transferring between planets or returning from the Moon. Special orbits can be used with all
programs. Type the corresponding letter when asking the name of the targetg for
geostationary, l (lowercase L) for equatorial, e for ecliptic, and r for the orbital plane of the
reference planet or moon.

17

Flight Planning mode

This mode allows you to use the numerical multibody predictor to generate the hypothetical
transfer orbit based on the information generated by other programs. When this mode is activated
the Plan text and the name of the program generating the plan will appear in a title. Also, the
trajectory will be displayed in purple (in a default configuration, of course). Whenever the burn
information is present a hypothetical trajectory can be generated. This mode is especially great
when planning free-return trajectories and returning from the Moon.
Projections
You can select the projection plane by pressing [Prj] button. Because the space is three
dimensional, displaying it in a two dimensional display will cause some graphical problems.
Therefore, choose the proper projection. Options are Self (your orbit), Ecliptic (ecliptic of the
reference planet), target (the targets orbit is used as the projection), periapsis, and HTO (your
hypothetical orbit).
Nonspherical Gravity
The Map program includes non-spherical gravity in its predictions. Currently only J2 coefficients
are used and this will be included only when the ship is within the sphere of influence. This
feature is controlled automatically. However, it can be manually overridden from the IMFD.cfg by
setting the option NonSpherical 0 it can be forced to be always active with NonSpherical 2.
Configuration Page
Some basic configurations required by multi-body predictor can be made from the configuration
page. In the top edge there is an indicator telling an amount of integration steps used in the
prediction. Also, it will tell how many planets are currently included in the computations. For
example, 3+5 of 62 indicates that there is three objects fully being used in the calculation and
five objects that are using an analytical update out of a total of 62 objects.

18

Button Layouts:

Button LayoutPage 1:
Main Menu

Choose object that

is Centered

Cycle through
Pages

Zoom In

Select Reference
Body

Zoom Out
Cycle through
Periapsis

Select Target
Body

Display all Star

System Objects

Cycle through Text

Modes

Turn Auto Zoom

on or off

Cycle through
Projections

Button LayoutPage 2:

Main Menu

Highlight your orbit

in bright green

Cycle through
Pages

Turn Display
Celestial Bodys
Sphere of
Influence on or off

Select Reference
Body
Select Target
Body

Turn Intercept
Mode on or off

Cycle through Text

Modes

Highlight your orbit

in purple

Cycle through
Projections

Cycle through
celestial bodies in
the star system

19

Button Descriptions
MNUMain Menu
Clicking this button brings up the main menu screen of IMFD.
PGMore Buttons
Switches the right hand side between two sets of buttons.
REFSet up Reference
Allows the user to set up the reference body.
TGTSet up Target
Allows the user to set up the target body. There are special options. Inputting G targets a
geostationary orbit. Inputting e targets the ecliptic. Inputting l targets the equatorial. Inputting
r targets the orbit of the reference planet.
MODMode Information Display
Cycle through text modes. There are 3 text modes, plus the map configuration page.
PRJProjection
Cycle through projections. There are 5 projectionsSelf, Ecliptic, Target, Periapsis, and
Equator. Self projection uses the current orbit of the ship. Ecliptic projection uses the ecliptic
plane. Target projection uses the target orbit for projection. Equator uses the Equator of the
target planet for projection. Periapsis uses the ships orbit in a periapsis around Pe. Reference.
CNTSet up Center
Allows the user to set up the object that the Map Program displays at the center. Inputting X
centers your vessel. Inputting p-Target_Name Centers your point of closest approach to your
target body (your periapsis with reference to that target body). Inputting r-Target_Name
Centers the target body at your closest approach point to that target body (your periapsis with
reference to that target body).
Z+Zoom in
Zoom in on the object that is currently centered.
Z- Zoom out
Zoom out on the object that is currently centered.
SELCycle through Periapsises or Apoapsises
Cycles through Periapsises or Apoapsises. There may be multiple Periapsises or even an
Apoapsis in your trajectory. When cycling, Pe stands for Periapsis and Ap stands for Apoapsis.
DSPBody Display
When on, all bodies above the mass limit designated in the Map Configuration Page are
displayed. When turned off, only the target body, reference body, reference bodys orbit, your
vessel, and your vessels orbit are displayed.
AZOAuto Zoom
Automatically zooms so that all items listed in the DSP description are centered and fit nicely into
the display.
SLFSelf Orbit
When on, your ships orbit is displayed in bright green. When off, your ships orbit is not
displayed.

20

SOISphere of Influence
When on, all bodies displayed have a dotted line around them indicating the boundary of their
sphere of influence. When off, no such lines are displayed.
INTIntercept Mode
Turn Intercept Mode on or off.
PLANCourse Plan
When on, your ships orbit is highlighted in Purple. When off, your ships orbit is highlighted in
green.
FINDFind Body
Cycles through all bodies in the star system displayed, highlighting their orbits in yellow as they
are selected.

21

Map Configuration Page

The Map Configuration Page controls how the Map Program runs. To access the configuration
page, hit the MOD button until it appears. It is probably best to leave these configurations in their
default values unless you must absolutely change them. The only exception to this rule is
Accuracy, which must be changed on occasion, such as when you are doing a direct reentry
from the moon and you need a perigee prediction with an accuracy of within 2 km at a distance of
250,000 km from Earth, or Mass Limit if you want to use more bodies in the calculation.

Legs/FrameNumber of trajectory legs computed in every time step.

AccuracyAccuracy of trajectory computations. A higher accuracy requires more CPU
resources and produces better results.
MassLimitThe Map Program will ignore all objects with a mass less than this. Exceptions to
this are, of course, your spacecraft.
PeriodLimitAutomatically limits trajectory calculation in one full orbit period around the
reference planet or moon.
Hyper. Limit Automatically stops trajectory calculation after a flyby.
TimeLimitCalculate trajectory a specified amount of seconds. This setting will override all other
limiters. (0=Disabled)
Tgt WeakPeDisplays flybys even if the periapis is outside a sphere of influence.
One Pe/Ref When on, the Map Program will display only one periapis passage (the closest
one) even if the trajectory will pass by the object multiple times. If disabled, periapis data is
recorded for every periapis passage.
RefAltitudeAltitude of entry interface.
MethodOrder of RK method used in trajectory calculation. Order options are RK 4(5), RK 6(7),
and RK 7(8).
Use CelbodyWhen YES, the Map Program acquires celestial body positions from Orbiter's
celestial body interface. Otherwise, the Map Program uses Keplerian orbit elements.

22

AdaptiveExperimental parameter, must be left in default setting.

Err. TolerExperimental parameter, must be left in default setting.

23

Text Modes
There can be multiple periapsises or even an apoapsis in your trajectory. Text information may
vary for these cases. For example, in an Earth to Mars transfer, you will have your periapsis at
Mars, your periapsis your solar orbit, and your apoapsis of your solar orbit. You can cycle
through these periapsises or apoapsises via the SEL button, and you can cycle through text
modes via the MOD button. Below are all abbreviations you will encounter in the Map Program:
RIn
PeT
PeV
PeD
PeA
Ecc
Cir
Tn
PlC
GET
Hed
EqI
Lon
Lat
ApT
ApV
ApD
ApA

Relative Inclination to a Node

Time to Periapsis
Velocity at Periapsis
Radial Distance of Periapsis
Altitude of Periapsis
Eccentricity of Orbit
Delta Velocity required to circularize orbit
Time to next node
Delta Velocity required for the Plane Change
Mission Elapsed Time *Notenot always accurate
Heading on the surface of the celestial body
Equitorial Inclination
Current longitude on surface of celestial body
Current latitude on surface of celestial body
Time to Apoapsis
Velocity at Apoapsis
Radial Distance of Apoapsis
Altitude of Apoapsis

24

Map Program Display

Display Close to a Planet
Here is what the display looks like close to a planet. Here, we are about 3 hours out of Earth
Ejection.
Program Type

Centered
Body

Your Ship
Target
Your Ships
Orbit (bright
green line)

Earths Orbit
Moons Orbit

Earth
Moon
Earths SOI
Moons SOI
Reference
SOIs are
displayed

Projection

Body Display
is ON

NoteYour ships orbit is broken. The line to the left shows your orbit in one solar orbit from
where you are now. It is broken because Marss gravity when you pass it (if you dont do an
insertion burn and just come right back to where you started) distorts your orbit slightly. Note,
you will be near where you started if you do this, but Earth will not be there!!! Also note how the
ship is inside Earths SOI in the figure above.

25

Display far from a Planet

Map display with Body Display OFF:
Program
Type

Centered
Body

Your current
Orbit

Target Body
Target
Bodys Orbit

Reference
Body
Projection

Your current
Position

SOIs are
displayed

Line of
Nodes

Point of
Intersection

Nodes
Targets
current
position

Note: The point of intersection is where your orbit and your targets orbit cross AND where a node
is. The point of intersection of your orbit and your targets orbit below Point of Intersection is
NOT where you will intercept the target because there is not a node in that location.

26

Map display with Body Display ON:

All objects in the display described on the previous page are the exact same. Hitting Dsp turns
on all other bodies and their orbits. The bodies orbits are in dull green, while their current
positions are displayed by little grey circles.

27

Intercept Mode:
In the below figure we are closing in on our Target, Mars. The Intercept Line (white dotted line)
leads to the point of intercept. Note that the periapsis at the target planet MUST be centered in
order for Intercept Mode to work.

Map
Program

Centered
Body

Targets
Orbit

Target Body

Your Ships
Orbit

Targets
current
Position

Reference
Body

Your current
Position

Projection

Intercept
Line

Intercept
Mode is ON
SOIs are
displayed

Intercept Mode: Close up view of intercept

Map Program

Centered
Body

Target Bodys
Current
Position

Target Body
Your Ships
Orbit

Target Bodys
Position at
Intercept

Your Ships
Current
Position

Reference
Body

Intercept Line
Projection
Your Ships
Periapsis

Intercept
Mode is ON

SOIs are
being
displayed

Target Bodys
Orbit

28

Course Programs
IMFDs list of course programs are the primary navigation tools of IMFD. They include programs
on everything you will need to do with IMFD, from setting up your trip to arriving at your desired
Planet.

Program Menu
You can select a program by pressing the [Prv] and [Nxt] buttons from the right edge of the
screen (Shift-1 and Shift-2) When you have selected the program you wish to use press the [Set]
button to activate it. Pressing the [Set] button on a program title will always reset the program to
its default condition. Important: Press [+] or [-] when the programs title (Target Intercept, Planet
Approach) is highlighted on the programs display to return to the program menu. But,
unfortunately, the program configuration will be lost because many common variables
are used within the programs. However, you can return into the main menu with [MNU] button
without losing the configuration. You can return back to the navigation program by activating the
course program from the main menu. The selected program is underlined and highlighted in
white. Also, you can go to the Map Program or Surface Launch Program without losing data.

29

Target Intercept Program

From technical point of view this program will calculate a solution for Lamberts problem,
sometimes known as Gausss problem. The following page is highly technical. Understanding
the math shown is NOT crucial to understanding the program.
This is the primary navigation program and there are two versions available. This program will set
your course to intercept the target at a time or date you have specified. This program can create
escape vectors for interplanetary transfers. The program can be also used in a mid course
corrections and later interception maneuvers after that. If you are using a planar transfer to your
destination, after executing the plane change maneuver in a node you should continue with the
off-plane version of the program to target directly towards the planet. In some cases the program
may generate highly inefficient transfer orbits. IMFD often is unable to locate a good window
automatically. It seems to assume we want the first possible opportunity, not the best one.
Adjusting just the TEj isn't usually enough. To plan our course we need to know when the best
time for the transfer, and how long it should take. To find the best launch window and thus
optimize your transfer, follow the step by step directions listed below:
Step 1. (in Target Intercept) Lock TOF
Step 2. Advance TEj until dV is minimized (I use 10x adjustments on the MJD to advance one
day per click)
Step 3. Unlock TOF
Step 4. Adjust TIn to minimize dV
Step 5. Alternately adjust TEj and TIn to further minimize the dV.
Step 6. Use scenario editor to advance time until one week before launch (for distant windows,
stop one month prior to launch also)
Step 7. Repeat step 5 to adjust for inaccuracies in original predictions (IMFD gets more accurate
over shorter times)
Step 8. Fast forward to launch.
The target can be a planet, moon or a space station. The Equator and Ecliptic cannot be
targeted, and an Invalid Target message will be displayed. The burns generated by the program
are usually not prograde or retrograde burns. However, in some special cases a pro-grade burn
can be used for an example, when intercepting the moon from low earth orbit. Pro-/Retro-grade
burns are more efficient than non pro-/retro-grade burns. Important: When adjusting the setup the
burn mode should be set to Realtime because the Pro-grade mode will make some adjustments
on its own. Be aware of the transfer efficiency. The line of nodes (blue dashed line) is the
position where the hypothetical transfer orbit and the target orbit intersect. (RIn) is the relative
inclination measured at this node. When using Off-plane version, Ejection angle (EjA) and the
Intercept Angle (InA) will also contain the error in inclination. Basically, EjA is to Interplanetary
flight as RIn is to an Earth to Moon flight. Therefore, lower the angle the better the transfer.

Plane Align (planar transfer only)

When using a planar transfer and the ship is the source object, plane alignment information is
displayed and the line of nodes will appear (green dashed line). When (EIn) is zero, the ship is
located in the orbital plane of the target at the time of interception. This statement says one
VERY importantyou can have a relative inclination of several tens of degrees with an Ejection
Inclination (EIn) of zero. For example, in an Earth to Moon transfer, the ship can be flying with a
Relative Inclination to the Moons orbital plane of 45 degrees, but the orbit could intersect the
Moons orbit at the exact point of interceptin which case the EIn would be zero while the RIn
would be 45 degrees. In such a case the node of the transfer orbit (blue dashed line) is located in
the interception position so the transfer would be similar to the off-plane transfer. Therefore,
unlike Relative Inclination which can only be reduced at an exact spot, the error in Ejection
inclination (EIn) can be reduced with normal/anti-normal burns in any position, reduction is most
efficient at the node (green dashed line). However, this statement doesnt take into account that a

30

plane change maneuver uses less fuel far from the planet. So, if you can either change planes
right at a node close to a planet, or not at a node very far from a planet, you should choose the
second option.

Burn Guidance Modes

Realtime Guidance Mode
Realtime mode is designed for short duration course correction maneuvers. The maneuver can
be considered to be short when the traveled central angle (the Reference Planet being the vertex)
during the burn is very small. Realtime mode is improper in long duration low orbit maneuvers like
the TLI burn, although it can be used with no problems. In this mode, the software computes the
target velocity vector in realtime and the vector changes its magnitude and direction while the
vessel moves forward. This mode is recommended for any type of mid-course corrections.
Off-Axis Guidance Mode
Off-Axis mode is specially designed for the Apollo TLI burn. This mode applies some thrust for all
3 axes and can be used even if the orbits are not perfectly aligned. This mode will compute a
numerical solution to place the vessel in target trajectory. This mode requires that the time to
ejection (TEj) is higher than 3 seconds. Below the 3 seconds the program no longer generates
new information for the burn execution programs (Autoburn / Thrust Monitor Program) as during
this time they are preparing to execute the burn. This mode is recommended for long duration low
orbit maneuvers like TLI, TEI, Orbit Insertions and Orbit Ejections.
ProGrade Guidance Mode
Off-Axis mode normally replaces this mode for guidance but it is still used by some programs.
The thrust is applied directly in a prograde or retrograde direction. This mode also requires that
the time to ejection (TEj) is higher than 3 seconds.

31

Transfer Types
Planar Transfer (Every mode except Off-Plane):

Off Plane Transfer (Off-Plane):

Off-Plane
This method will create a trajectory that will intercept the target directly. This is the easiest way to
reach the destination, but it's also very often the most inefficient way. In this method there is no
plane change nor any other maneuver during the flight. In some special cases this may be the
only working method. In this method the EIn presents how much the target is out of source plane
at time of interception.

Source Plane
This method will create a trajectory that will follow the source plane for some time. Typically 90
degrees before target interception the off-plane section will begin requiring a plane change burn
(2nd Maneuver). When the time of this maneuver is close the IMFD can be prepared for the 2nd
maneuver using automatics by pressing the Prep. PlC item.

32

Two-Plane
This method creates a trajectory that will follow both Source and Target planes. This may not be
a very useful method; it is just a special case of the Source-/Target Plane methods.

Target Plane
This method will create a trajectory that will begin with an off-plane transfer section typically the
first 90 degrees and then goes into the target plane. This would be good choice for the Earth to
Mars transfer. Note that there is currently a bug that requires you to switch from Target Plane
mode to Manual Target mode after leaving a planets SOI.

33

Button Layout
Button LayoutPage 1:

Main Menu
Previous Item

Cycle through
Pages

Next Item

Select Reference
Body

Adjust UP
Adjust DOWN

Select Target
Body

Set Value

Cycle through Text

Modes

Set Adjust
Increment

Cycle through
Projections

Button LayoutPage 2:
Main Menu

Turn Burn
Vector View
ON or OFF

Cycle through
Pages

Zoom IN
Select Reference
Body

Zoom OUT

Select Target
Body

Select Source
Select
Centered
Body

Cycle through Text

Modes
Cycle through
Projections

Autoburn

34

Button Descriptions:
MNUMain Menu
Clicking this button brings up the main menu screen of IMFD.
PGMore Buttons
Switches the right hand side between two sets of buttons.
REFSet up Reference
Allows the user to set up the reference body.
TGTSet up Target
Allows the user to set up the target body. There are special options. Inputting G targets a
geostationary orbit. Inputting e targets the ecliptic. Inputting l targets the equatorial. Inputting
r targets the orbit of the reference planet.
MODMode Information Display
Cycle through text modes. There are 3 text modes, plus the map configuration page.
PRJProjection
Cycle through projections. There are 5 projectionsSelf, Ecliptic, Target, Periapsis, and
Equator. Self projection uses the current orbit of the ship. Ecliptic projection uses the ecliptic
plane. Target projection uses the target orbit for projection. Equator uses the Equator of the
target planet for projection. Periapsis uses the ships orbit in a periapsis around Pe. Reference.
PRVPrevious Item
Scrolls through selectable items in reverse order. Note that not all items displayed are selectable.
NXTNext Item
Scrolls through selectable items. Note that not all items displayed are selectable.
+Adjust UP
Increases the value of a selected item. If a selected item has no value, it scrolls through the
options for that item.
- Adjust DOWN
Decreases the value of a selected item. If a selected item has no value, it scrolls through the
options for that item.

SETSet Value
This button allows the user to input a value. If you need to adjust a large amount or you just want
to input an exact value, then use this button.
ADJAdjust Increment of Adjustment
This button cycles through the increments of adjustment. The three options are 1x, 10x, and
100x. The larger the number, the more coarse the adjustment will be.
BVTurn ON or OFF Burn Vector View
Turns Burn Vector View on or off.
Z+Zoom in
Zoom in on the object that is currently centered.
Z- Zoom out
Zoom out on the object that is currently centered.

35

SRCSet up Source
Allows the user to set up the source object.
CNTSet up Center
Toggles the center between the Reference Object and the point at which you intercept the target.
ABAutoburn
Initiates Autoburn.

36

Target Intercept PagePage 1:

Hit the MOD button to go cycle through Page 1 without picture, Page 1 with picture, Page 2
without picture, Page 2 with picture. Descriptions of the picture can be found on the following
page.

Target Body

Course
Program

Source Body
Program Type
Nodes at
Plane Change

Target Bodys
Orbit

Your current
Position
(purple line)

Intercept Point
(white line)

Sources
Current
Position
(green line)

Sources Orbit
Your Transfer
Orbit
Line of Nodes

Text Items:
TEjTime to Ejection
Current time until you should eject from low orbit around the source planet. It is not crucial if you
do not eject at this exact time.
GETGET of Ejection
The time of ejection in GET.
EjAEjection Angle
Your current ejection angle.

InAIntercept Angle
The Intercept Angle of your planned course.
RInRelative Inclination
Your current Relative Inclination
PeAAltitude of Periapsis
The altitude of your periapsis around the Reference body.
oVOutward Delta Velocity
The Outward Delta Velocity of your planned transfer.
iVInward Delta Velocity
The Inward Delta Velocity of your planned transfer.

37

PlCPlane Change Velocity

Delta Velocity due to the plane change.
TotTotal Velocity
The Magnitude of your escape vector.
TinTime to Intercept
Time to intercepting your target.
GETGET at Intercept
The GET at the time which you intercept your target.
RealtimeBurn Mode
Selects the burn mode for a plane change.
TOFTime of Flight
When unlocked, you are free to change the time of ejection and intercept. When locked, you can
change either one, but the other will change too in order to keep the time of flight the same.
Smooth Adj.Adjustment Mode
There are three options. Smooth Adj. lets you adjust the time of intercept or ejection normally.
Src. Period adjusts it in increments of the period of the source planet (31.54M seconds for Earth).
Tgt. Period adjusts it in increments of the period of the target planet.
Prep PLCPlane Change Mode
Turn this on by selecting it and hitting the plus before making a plane change.
TnTime to Node
Time to the node, and consequently, time to plane change maneuver.

38

Target Intercept PagePage 2:

Hit the MOD button to go cycle through Page 1 without picture, Page 1 with picture, Page 2
without picture, Page 2 with picture.

Target Body

Course
Program

Souce Body
Program Type
Nodes at
Plane Change

Target Bodys
Orbit

Your current
Position
(purple line)

Intercept Point
(white line)

Sources
Current
Position
(green line)

Sources Orbit
Your Transfer
Orbit
Line of Nodes

Text Items:
Offset DisabledOffset Mode
This is how to turn on or off Offset Mode. A description of Offset Mode is located on the next few
pages. You should usually use Vel. Frame mode.
ProgradePrograde
This has nothing to do with offsetting. You should not change this value.
LonLongitude in the reference frame.
LatLatitude
Latitude in the reference frame.
RadOffset Vector Length
Length of the offset vector.
oVOutward Delta Velocity
The Outward Delta Velocity of your planned transfer.
iVInward Delta Velocity
The Inward Delta Velocity of your planned transfer.
PlCPlane Change Velocity
Delta Velocity due to the plane change.

39

TotTotal Velocity
The Magnitude of your escape vector.
TinTime to Intercept
Time to intercepting your target.
GETGET at Intercept
The GET at the time which you intercept your target.
LPCLongitude of Plane Change
Longitude of reference body at which you execute your plane change maneuver. You are free to
rotate this around.

40

Offsetting the Target

Target offsetting allows you to displace the target point from the center of the target planet.
Target offsetting is activated when the offset reference frame is selected. Lon, Lat, and Rad items
define the offset vector in spherical coordinates. When the offsetting is activated, an Offset flag
will appear in main program screen. The offset point can be displayed by pressing [Cnt] button.
This will switch the view between reference planet and offset point. The Offset vector is white and
dashed. Prograde/Retrograde selector has nothing to do with offsetting so dont touch it. It is
sometimes required in moon hopping in outer planets. Use a positive Rad number to lead the
target object, and use a negative Rad nuber to trail the planet.
Course
Program

Target Body
Source Body

Program Type
Transfer Orbit

Target Bodys
Surface

Target
Objects Orbit

New Intercept
Point

Reference

Offset Vector
(dotted white
line)

Projection

Text Items:
The text items are the exact same as described on Target InterceptPage 2.

41

Tangential Transfer Program

This program works very similarly to the Target Intercept Program, but will take only a one input
parameter from the user which is expressed in a two formsa time to ejection (TEj) and a MJD of
ejection. This program generates a transfer orbit that will be tangent to both the source orbit and
the target orbit. The program uses a planar transfer and a plane change burn is required in a
node. The ejection burn will be a pro- or retro-grade burn. The white line in the display indicates
an orbit intersection position and the orange dashed line indicates the position of the target planet
at the time of intersection. If these two lines are over each other, you will intercept the target in
that position. The Source orbit can be hyperbolic, but the target must be elliptical or circular.
When the local equator or ecliptic is targeted the radius of the target orbit can be defined. There
are no orbiting bodies so the target position is not displayed. This program creates the most
efficient transfers, but at the cost of being VERY difficult to set up a perfect orbit. It is strongly
recommended not to use of this program as a normal means of interplanetary travel.

Targets Orbit

Course
Program

Targets Current
Position

Program Type
Your Position
at Intercept
(white line)

Your Transfer
Orbit
Source Orbit

Target
Position at
Intercept
(dotted yellow
line)

Current Position
(green line)
Ejection Position
(purple line)

Reference
Line of Nodes
Projection

Text Items:
TEjTime to Ejection
Current time until you should eject from low orbit around the source planet. It is not crucial if you
do not eject at this exact time.
GETGET of Ejection
The time of ejection in GET.
TinTime to Intercept
Time to intercepting your target.
GETGET at Intercept
The GET at the time which you intercept your target.

42

DisDelta Radial Distance

Final Radial Distance from the Reference body minus initial Radial Distance from the Reference
Body.
RInRelative Inclination
Your current Relative Inclination.
oVOutward Delta Velocity
The Outward Delta Velocity of your planned transfer.
iVInward Delta Velocity
The Inward Delta Velocity of your planned transfer.
PlCPlane Change Velocity
Delta Velocity due to the plane change.
TotTotal Velocity
The Magnitude of your escape vector.

43

Planet Approach Program

You can easily change the orbit altitude or periapsis location with the planet approach program
assuming that you are in an approach stage (Close to or inside the sphere of influence and
approaching with a hyperbolic orbit). Also, the equatorial inclination can be adjusted. This is good
when planning to approach a high inclination orbit. However, you might not be able to choose an
inclination lower than your current inclination to the equator. Sometimes, to reach lower
inclinations, abnormal plane change maneuvers must be executed in the ascending or
descending node of the equator, but its worth a try if you really want to. Min EqI and Max EqI
display the bounds of inclination adjustment. Inclinations higher than -90 and lower than 90
degrees represent prograde orbits, and inclinations higher than 90 and lower than -90 degrees
represent retrograde orbits. When the inclination is negative you will approach the planet from the
South Pole, otherwise, you will approach the planet from the North Pole. The burn created by
this program should be executed as far from the planet as possible. Sometimes it is possible to
execute the burn as far as three times the sphere of influence. This will minimize the fuel usage.
Smaller correction burn can be executed later if required. Note that the planet you are trying to
reach MUST be the REFERENCE, NOT the target. Also, your vessel must be the source to
make correction burns. In order to set your inclination with respect to the equator (probably what
you want to be doing if you intend on landing), the target MUST be Equator.

Planet Approach Display Screen:

Course
Program

Target
Source

Planet
Approach
Program

Your Current
Orbit

Your current
Position (end
of linenot
visible in the
screen)

Your Target
Orbit
Your Line of
Nodes (dotted
green line)

Planet Surface
Target Line of
Nodes (dotted
purple line)

Reference
Body
Projection

Low Influence
Warning

*NoteThe low influence warning will go away as you get closer to the planet. You can still
complete autoburns even when under low influence. This is probably a better idea as it is more
fuel efficient. Also, for the RIn item, Relative Inclination to the target, the target is the equator in
the picture above, so you are inclined 40 degrees to the equator. Be careful though, as executing
the burn too far from the planet will lead to inaccuracies. It is best not to execute the burn more
than twice as far as the SOI.

44

Text Items:
EqIEquatorial Inclination
Inclination with respect to the Equator.
PeAAltitude of Periapsis
Altitude of your periapsis (closest approach) to the reference Planet.
RInRelative Inclination
Inclination relative to the target.
EInEject Inclination
Ejection Inclination. This value is not very important.
AgPArgument of Periapsis.
The Argument of Periapsis of your target orbit. This is the angle between your periapsis and your
ascending node.
PeTTime to Periapsis.
Time to your periapsis (closest approach).
CirCircularization Velocity
Delta Velocity required to make your hyperbolic approach orbit a circular orbit.
Min EqIMinimum Equatorial Inclination
Minimum Equatorial Inclination possible given all of your current parameters.
Max EqIMaximum Equatorial Inclination
Maximum Equatorial Inclination possible given all of your current parameters.
dVDelta Velocity
Delta Velocity required for your current orbit to match the target orbit. You can use Autoburn or
the Burn Vector View to complete this burn.

45

Orbit Insert Program

You MUST use IMFD 4.2.1 for this program to work properly!!!! This program does not require
much explanation. It is used to make an orbit insertion from hyperbolic approach orbit to a low
orbit around the reference planet. You can define the eccentricity or the apoapis distance of the
target orbit. The burn integration technique is used for the burn position calculations. This
Program might not run 100% efficiently or accurately. The Autoburn might cut off early; if it does,
you can switch to Burn Vector View to finish the burn manually.

Orbit Insert
Program

Your Current
Orbit

Eccentricity

Your Target
Orbit

Apoapsis
Radial
Distance

Your Current
Position

Delta Velocity

Burn Initiation
Position
(dotted green
line)

Time Until
Burn
Burn Duration

Burn Cutoff
Position
(purple line)

Planet Surface

46

Delta Velocity Program

The Delta Velocity Program is a manual Delta Velocity tool. You can input how much delta
velocity and in which direction and hit Autoburn and the program will change your velocity as
such. You should probably not need to use this program all that much, but it is a nice tool to
have.

Course Program

Target

Delta Velocity
Program

Source
Target Orbit

Your Current
Line of Nodes
(dotted green
line)

Current Orbit
Your Current
Position (green
line)

Your Target Line

of Nodes (dotted
purple line)

Planet Surface

Reference
Planet

Burn Stop/Start
Positions (purple
lines)

Projection

Text Items:
The following are all of the text items not explained in the diagram above:
TEjTime until burn
Time in seconds until the burn initiates (if you have enabled Autoburn).
GETGET Time of Burn
Time of the Burn in GET
Vel. FrameReference Mode Option
Reference Mode Option. This should be left in Vel. Frame. Other options are Local Vrt., P30
LVLH, and Global.
Off AxisBurn Mode
Burn Mode. Off Axis is the only option.
dVfDelta Velocity in the x direction.
Delta Velocity to apply in the x direction. Its easier to think of the f standing for forward
(prograde is positive, retrograde is negative).
dVpDelta Velocity in the y direction.
Delta Velocity to apply in the y direction. Its easier to think of the p standing for planar (north is
positive, south is negative).

47

dVoDelta Velocity in the z direction.

Delta Velocity to apply in the z direction. Its easier to think of the o standing for outward
(positive is away from a planet, negative is towards a planet).
TotTotal Delta Velocity
Total Delta Velocity to apply.
ApAApoapsis Altitude
Altitude of the Apoapsis of your target orbit.
PeAPeriapsis Altitude
Altitude of the Periapsis of your target orbit.
EccEccentricity
Eccentricity of your target orbit.
RInRelative Inclination
Relative inclination of your target orbit.
LANLongitude of Ascending Node
Longitude of Ascending Node of your target orbit.

48

Orbital Program
The Orbital Program can help you change your orbit if you are trying to, or it can help you find a
target in space. It has three modes: Circularize, Match Velocity, and Find Target.

Button Layout:

Main Menu

Open Circularize
Mode

Cycle through
Modes

Open Match
Velocity Mode

Select Reference
Body

Open Find Target

Mode

Select Target
Body
Cycle through Text
Modes
Autoburn
Cycle through
Projections

*Note: PG cycles through Circularize, Match Velocity, and Find Target modes. MOD and PRJ
are ineffective in this program.

49

Circularize Orbit Mode:

This Mode will make your orbit a perfect circle. Center the cross until it turns grey and fire your
engines until dV reaches zero. You may have to readjust your attitude several times, as the first
time you center the cross may not be perfect. Or just use Autoburn.
Orbital
Program

Reference
Target

Circularize
Orbit Mode

Burn
Crosshairs

Delta Velocity
Attitude
Position

Burn Duration
Current
Eccentricity

50

Match Velocity Mode

Use this mode to match your velocity with a target. Very useful for station keeping, or for
intercepting the Martian Moons.
Orbital
Program

Reference
Target

Match Velocity
Mode

Burn
Crosshairs

Delta Velocity
Attitude
Position

Burn Duration
Distance to
Target

51

Find Target Mode

Rotate towards the cross. When the cross is in the center of the crosshairs and it turns grey, you
should be looking directly at the target.

Orbital
Program

Reference
Target

Find Target
Mode

Burn
Crosshairs
Attitude
Position

52

Surface Launch Program

This program can be used to launch into a lunar transfer orbit or any other parking orbit for an
interplanetary flight generated by the Course, Base Approach or Sling-shot programs. Operation
mode must be selected to correspond with your current plan. When using lunar transfer mode the
target must be defined. Also, you must define the date of lunar orbit insertion. This parameter is
not available when you are not using the lunar transfer mode. The (Time) item in the launch
conditions display counts down the optimum launch time. Every planet rotation, there are two
launch opportunities, some slightly better than the others, but pretty much equal (feel free to
launch whenever the Time reaches zero). You can launch any time you want to in a heading
pointed by (Hed), but the launch conditions may not be at their best and you may end up with a
high EIn.
During the ascent, the ship should be moving towards this heading (Hed). Keep the Surface
Launch Program open the entire time, and introduce side slip to keep the EIn at its minimum.
The target is more like a point rather than a plane. So, dont worryif EIn is not perfectly zero,
later course corrections are possible. It is very similar to heading towards a VOR beacon with an
airplane. (EIn) presents deviation from the target point. This number should be as close to zero
as possible, but not during the first few minutes when launching in some other direction than that
displayed in the Hed item. For example, if you are launching from Cape Canaveral at a heading
of 330 degrees, and Hed is 90, dont worry about EIn being very high as you are rolling down the
runway, but once you turn towards 90 degrees and begin to pick up speed, you should start
watching EIn. Dont add side slip if it is decreasing, wait until it has hit a minimum and started
increasing, THEN add side slip. You should be able to control the liftoff so that the (EIn) is zero
at MECO (if you launch when the time item on the Surface Launch Program says zero, EIn will be
very close to zero if you perform a nominal ascent). It shouldnt be very difficult to do.
Under most circumstances, the best launch heading would be 090 because the launch would be
in a rotation direction of the planet and you can use the rotation velocity to assist, but that is not
always the case. Launching in any other direction would be a little more difficult because of the
planet rotation must be compensated during the launch and it will consume more fuel. The
launch latitude should be as close to equator as possible. (BLL) shows optimal launch latitude but
you dont have to launch from there. Optimal launch heading (Hed) is displayed launch conditions
display. Launch into this heading should take a place when the (Time) is zero. (RIn) displays the
transfer orbit inclination relative to target orbit. The launch conditions display will disappear after
takeoff or launch. The realtime flight data display remains.

53

Button Layout:
Note that on Page 2 (brought up when you hit MODand not shown here), only Z+ and Z- work
(BV and Autoburn do nothing).

Main Menu

Previous Item

More Buttons

Next Item

Select Reference
Body

Adjust UP
Adjust DOWN

Select Target
Body

Set Value

Cycle through Text

Modes

Set Adjust
Increment

Cycle through
Projections

54

Surface Launch Program Display:

The orbit display (the picture) is almost identical to Orbit MFD. Once you launch, Hed, Time,
BLL, and TEP disappear. Text Items are described below:
Surface
Launch
Program

Target

Current Orbit

Planet Surface

Current
Apoapsis

Bad Plane
Warning

Current
Periapsis

Reference

Projection

Text Items:
Course-ProgramData Location
This is where the Surface Launch program gets its information. Options are Course-Program,
BaseApproach, Slingshot, Higher-Orbit, Lower-Orbit, and Lunar Off-Plane. Lunar Off-Plane is
useful for launches to LEO before going to the moon. If you want to get data from another MFD,
you will have to use the shared mode.
AltAltitude of Orbit
This is the altitude of the parking orbit.
HedHeading
This is the heading that you should fly if you were to take off right now.

EccEccentricity
This is your current eccentricity.
PeAPeriapsis Altitude
Your current Altitude of Periapsis.
ApAApoapsis Altitude
Your current Altitude of Apoapsis.
EInEjection Inclination
Current Ejection Inclination.
HedLaunch Azimuth
The heading you should fly when you launch for orbit.

55

TimeTime to launch
Time in seconds until your optimum launch time.
BLLOptimum Latitude of Launch
The optimum Latitude that you should launch at. It does not matter if you are not at this latitude,
however, you should be as close to the equator as possible.
Bad PlaneBad Plane Warning
This is displayed if your Ejection Inclination is greater than one degree.

56

Orbit Eject Program

Orbit eject is probably the easiest program to use. It is used for escaping from the current planet
you are orbitinga necessity required when traveling between planets or moons. However, it is
not required when traveling from the Earth to the Moon because you never leave the influence of
the Earth. So, in order to use this program, you must leave the source planets SOI. In the
program, there are five items those can be modified. (oV) is the outward delta velocity, thats the
velocity added to a velocity of the planet. (TEj) is the time to the ejection. The Burn mode item
is used to select the burn mode, which can be off-axis or realtime.
The Green dashed line is the position for the burn recommended by the flight computer. Time to
Burn (TtB) will tell how long it takes to reach this position. This is the position at which Autoburn
will begin the burn.
Burn Mode
There are also two different burn modes availableRealtime and Off-Axis. Realtime mode is a
good one for escaping from the low gravity bodies. This mode uses a burn vector to eject the ship
towards a correct heading. However, this mode is slightly more inefficient in long burns, but works
perfectly. The Off-Axis mode is created for long burns and it uses a Pro-grade burn. So, use a PG
autopilot or the autoburn feature to complete the burn. If you use the prograde autopilot, turn on
Burn Vector View and make sure that the cross stays centered. It may deviate, at which point
you should turn off the prograde autopilot and rotate the ship manually to center the cross. OffAxis mode is not available if (EIn) is greater than 1.0 degrees. Nor it is available during the liftoff.
In a highly elliptical orbit the integration of the exact burn position may take a few seconds. The
position is integrated with high accuracy and you should end up exactly in a correct heading after
the burn. Do NOT switch between realtime and off-axis during the burn.

57

Orbit Eject Display Screen

Note that the button layout is the same as the Course Program with one exceptionthere is no
source or center button on the second page (accessed by hitting PG). Once the burn starts the
green line (current position) disappears and the purple line (New Position Line) becomes your
new current position line.
Orbit Eject
Program

Your current
Orbit

Position at
which you
leave the
Planets
Sphere of
Influence

Line of Nodes
Your Target
Orbit
Burn Start
Position
(green dotted
line)

Your current
Position
Reference

New Position
Line (purple
line)

Projection

Text Items:
oVOutward Velocity
The outward velocity that you inputted or that another program sent the Orbit Eject Program. To
get another program to send data to the Orbit Eject Program please see the Data Source item
below.
TEjTime to Ejection
Time in seconds until the burn must start.
GETGET of Ejection Burn
The GET at which the burn must start.
Data SourceData Source
This is where the Orbit Eject Program gets its data. Options are Lower Orbit, Higher Orbit,
Course, BaseApproach, and Slingshot. Higher Orbit and Lower Orbit require a manual input of
oV, while the other three get that number from their respective programs. You must use shared
mode if you want to use data from another MFD.
Burn ModeBurn Mode
Burn Mode being used. Options are Realtime and Off-Axis.
EqIEquatorial Inclination
Current inclination with respect to the equator.
EjAEjection Angle
Ejection Angle for Transfer Orbit.
EInEjection Inclination
Current Ejection Inclination.

58

TnTime to Node
Time to the next node. If negative, then it is time since the last node.
PlCPlane Change Velocity
Amount of dV required for the Plane Change burn.
dVDelta Velocity
Delta Velocity required to match your current orbit with the target orbit.

59

Base Approach Program

With this program it is possible to plan a flight that will allow you to land directly on a base located
on a planet without an orbit insertion burn before landing. This program must be initially set up
and used far from the planet, such as near the edge of the SOI. This will allow better
synchronization with the base, and it will also use less fuel. There exist only limited trajectories
which will allow you to land on a base. To find a proper trajectory or flight plan, you must increase
the suggested flight time (Hintonly used in Re-Entry Mode). If the flight computer is unable to
find a solution then no purple orbit (target orbit) is displayed. It is much more likely to find a
solution for the Orbit-Insert mode than for the Reentry Mode. Note that the Reentry (Old) Mode is
just the older version of the Reentry mode, and should not be used. The Base Approach
Program will alter your orbit to alter your time to intercept, making you intercept your target planet
or moon when the base is in a desirable location. Thus, the faster a planet or moon rotates, the
easier it will be to find a solution, and the less dV the correction burn will take because your target
base passes under your periapsis with greater frequency, so your orbit does not need to be
altered as much. When the solution is found, the flight data for the solution will appear. You can
still increase the Hint or reentry anticipation to find another flight plan. Before all of this though,
you must set up the target base with [TGT], or a longitude and latitude to tell Base Approach
where you want to land.
In the flight configuration you can define the re-entry angle, reference altitude (altitude at which
you are considered to be in the atmosphere) and anticipation (degrees of longitude between
Entry Interface or reference altitude and your landing sitesee the picture for more details). The
reference altitude must be set correctly as this is the level from where the re-entry angle is
measured and the anticipation begins. Good values might be 120km for the Earth and 8km for
Mars. Anticipation is measured in degrees from the center of the planet. When landing on a
planet that has a very thin atmosphere, the anticipation should be increased because braking will
take longer.

60

Moon to the Earth return

When returning from the Moon to the Earth, like Apollo used to, the landing zone is located on the
far side of the Earth as seen from the moon (See fig. Elliptical). Since the re-entry angle is only
5.5 to 7.5 degrees, the zone is located very close to the periapis. Latitude of the periapis will
depend on the position of the Moon and the size of the landing zone will depend on the re-entry
angle. The inclination of the Moon is about 23 degrees relative to Earths equator. Therefore, the
area that can be targeted from the moon lies between 23deg North and 23deg South but only a
small part of that area can be target at a time. So, if the base is located outside the 23 degree
area it is highly difficult to land there using elliptical orbit. It is possible if you set up your flight
from the moon properlysee the tutorial with an Earth to Moon flight and direct reentry. When the
rotation of the planet is recognized the landing zone will cover all longitudes between the
latitudes.

Hyperbolic Approach

Elliptical Approach

When approaching a planet, lets say Mars, the orbit will be hyperbolic. That will allow you to
rotate the periapis all over the planet. Therefore, the landing zone will be shaped like a ring. (See
fig. Hyperbolic) and will cover most of the planet. So, there shouldnt be any difficulty landing on
Mars or any planet when approaching hyperbolically. The diameter of the ring depends on the
eccentricity of your orbit. When the eccentricity is very close to one the area will be more similar
to the area in the picture Elliptical. When the eccentricity increases the diameter of the ring will
also increase. It is necessary to execute the first synchronization and plane orientation burn far
from the planet, perhaps as far as 500000 seconds before the periapis. This is far before crossing
the sphere of influence. Making a burn that far is highly inaccurate and the trajectory will change
a lot after the burn, but it will reduce the magnitudes of the coming burns. Be careful though
sometimes making a burn too far away can make things worse. So, two more synchronization
burns should follow when the time to periapis is about 100000 and 15000 seconds. Orbit Insert
mode can be used when you wish to establish an orbit over the base. The (Alt) item defines the
altitude of the periapis. The orbit must be circularized at the periapis (if you are doing an orbit
insert, not a direct reentry). If the orbit is not circular the synchronization with the target base will
not work as well as it is capable of. The rotation of the planet is calculated in the synchronization
during the approach and circular orbit phase. The (Num) item is used to define the number of full
orbit periods to spend on orbit before landing. Zero means that there is only a fraction of orbit
before landing, which in a few circumstances might not be enough for a de-orbit burn, but should
usually work fine with moon landings. There are two orbits, opposite to each other, which will lead
to the target base. One will lead to pro-grade orbit and the other to retro-grade orbit.
Orbit insert mode doesnt suffer problems of critical timings and zones. Therefore, it is much
easier to use. It is possible to use orbit insert mode to return from the Moon to the Earth and land
on a specific base but the orbit insertion to low earth orbit is required. For a direct reentry,
precise timing is needed (see the Moon to Earth flight with a direct reentry tutorial to see how to
do this).

61

Orbit Insert Mode:

Base
Approach
Program

Target Object

Planet Surface

Target Orbit

Current
Position

Current Orbit

Source Object

Program Mode
Target Line of
Nodes (dotted
purple line)

Current Line of
Nodes (dotted
green line)

Reference
Projection

Text Items:
N/ANon Applicable
Non Applicable for this program mode.
ProGradeOrbit Direction
Direction of Orbit. A description of Inclinations with respect to directions can be found in the
description of the Planet Approach Program. Options are prograde or retrograde.
TEjTime to Eject
With this item you can tell the Base Approach Program in how long to make the correction burn.
The value inputted will be in seconds, and the Autoburn will execute the burn xxxx (the value you
inputted) seconds AFTER YOU INPUTTED IT.
GETGet of Eject
This is so you can set up the same exact instance as TEj, but using a GET time.

Orbit-InsertProgram Mode
This defines the program mode. Options are Re-Entry, Re-Entry (Old), and Orbit Insert.
LonTarget Longitude
Target Longitude that Base Approach will bring you to.
LatTarget Latitude
Target Latitude that Base Approach will bring you to.
AltAltitude
Target Altitude of your periapsis (closest passage).

62

NumNumber of Passages
This is the number of passages over the target landing site at which you execute your deorbit
burn. Note that this number is AFTER the insertion burn. If Num is 2, then you should perform
your deorbit burn as you pass over the base a third time. If Num is 0, then you should do your
deorbit burn right as you are passing over it the first time.
PeTTime to Periapsis
Your current time to Periapsis.
GETGET of Periapsis
The GET of your Periapsis.
PeVVelocity at Periapsis
Your estimated Velocity at Periapsis.
EqIEquatorial Inclination
Your current Equatorial Inclination.
dVDelta Velocity
Your required Delta Velocity to make your orbit match your target orbit.

63

Reentry Mode:
Base
Approach
Program

Target Object

Planet Surface

Target Orbit

Current
Position

Current Orbit

Source Object

Program Mode
Target Line of
Nodes (dotted
purple line)

Current Line of
Nodes (dotted
green line)

Reference
Projection

Text Items:
HintTime to Periapsis
Your time to Periapsis. Get this number from the Map Program for the most accuracy.
ProGradeOrbit Direction
Direction of Orbit. A description of Inclinations with respect to directions can be found in the
description of the Planet Approach Program. Options are prograde or retrograde.
TEjTime to Eject
With this item you can tell the Base Approach Program in how long to make the correction burn.
The value inputted will be in seconds, and the Autoburn will execute the burn xxxx (the value you
inputted) seconds AFTER YOU INPUTTED IT.
GETGet of Eject
This is so you can set up the same exact instance as TEj, but using a GET time.
Re-EntryProgram Mode
This defines the program mode. Options are Re-Entry, Re-Entry (Old), and Orbit Insert.
LonTarget Longitude
Target Longitude that Base Approach will bring you to.
LatTarget Latitude
Target Latitude that Base Approach will bring you to.
AltAltitude
Target Altitude of your periapsis (closest passage).

64

ReAReentry Angle
Angle between your velocity vector and the planets horizon at Entry Interface.
AntAnticipation
Estimated degrees around the planet that you will pass from the time of Entry Interface to the
time of Landing.
ReTTime to Reentry
Estimated time to reentry. Listen to the number given to you by the Map Program over this
number.
GETGET of Reentry
The estimated GET of your Reentry.
ReVVelocity at Reentry
Your estimated Velocity at Reentry.
ReAReentry Angle
Just a second display of Reentry Angle, see above for description.
EqIEquatorial Inclination
Your current Equatorial Inclination.
dVDelta Velocity
Your required Delta Velocity to make your orbit match your target orbit.

65

Slingshot Program
From a technical standpoint, the sling shot program is very much like the orbit-eject program. The
user interface is similar and the mathematics in the program are the same as orbit-eject. This
program is used to change your course to the next target and it can be used for powered or
unpowered fly-bys. The program will create burn data for the correction burn to make sure that
your exit vector will be exactly the same as that defined by the target intercept program
containing your course to the next stage. The source of navigation information can be selected
with the top-right item. Available sources are the same as in the Orbit-Eject section. Items on the
left edge allow you to define the position of the burn, but usually this is not required since the burn
should be executed as early as possible. This program doesnt contain any functions to optimize
sling-shots. Nor does it contain any sling-shot planning functions. The program is solely
designed to move your course plan to the next target. The program is capable of generating an
escape vector for a minor body, such as a moon, providing that the moon is outside its planets
SOI. So, you can eject the ship from the Moon to the Mars if you want to. When ejecting from the
Moon, the most recommended time for the ejection is when the Moon is moving in the escape
direction. It is important to note that a slingshot is NOT always the most efficient means of getting
to a planet.
Once you perform a correction burn about an hour from Periapsis, dont perform another one until
periapsis passage. dV will increase rapidly, but dont worryit will decrease back to normal just
before you engage Autoburn at PeT=0.
Pro/Retro-grade
You can choose whether to launch in a pro- or retro-grade direction over the reference planet.
Choose the mode carefully so that you wont collide to the reference planet. Watch the periapis
altitude item (PeA).

66

Slingshot Display Screen:

Sling-Shot
Program

Source
Current Orbit

Reference
Planet Surface

Current
Periapsis

Current
Position (end
of purple line)

Target Orbit
Target
Periapsis

Position at
which you
leave the
reference
planets SOI
(white line)
Reference
Projection

Text Items:
TEjTime to Eject
With this item you can tell the Base Approach Program in how long to make the correction burn.
The value inputted will be in seconds, and the Autoburn will execute the burn xxxx (the value you
inputted) seconds AFTER YOU INPUTTED IT.
GETGet of Eject
This is so you can set up the same exact instance as TEj, but using a GET time.
CourseData Source
This shows that you are getting your data from the course program. It is not recommended that
you get your data from any other program.

ProgradeOrbit Direction
Dictates whether you want your slingshot to be a prograde or retrograde orbit. It is much better to
leave this in prograde mode.
EjAEjection Angle
Your current Ejection Angle.
LANLongitude of Ascending Node
Your current Longitude of Ascending Node.
EInEjection Inclination
Your current Ejection Inclination.
PeAAltitude of Periapsis
Your current Altitude of Periapsis.

67

PeTTime to Periapsis
Your current Time to Periapsis.
C3Energy
Your current Orbital Energy of Escape Asymptote.
oVOutward Velocity
Current Outward Delta velocity.

68

Appendix A
AgP Argument of Periapsis. This is the angle between the longitude of the periapsis and the
longitude of the ascending node.
Alt Altitude at which the Base Approach program in reentry mode considers you to have started
reentry. Also, the altitude of the parking orbit in the Surface Launch program.
Ant Reentry anticipation angle. This is the measure of the angle in degrees (the center of the
reference planet being the vertex) between the point at which you cross the Alt number on the
Base Approach display screen and the landing site. For example, an Ant of 90 would mean you
would travel a quarter around a planet from 120k (if that is the altitude setting you chose) to your
landing site.
ApA Altitude of the apoapsis of the orbit measured above the surface of the reference planet.
ApD Radial distance (from the center of the reference planet) of the apoapsis of the current orbit.
Apt Time in seconds until reaching the apoapsis.
ApV Predicted orbital velocity in meters/second at the apoapsis.
BLL The best latitude to launch as dictated by the Surface Launch program. Dont worry if your
latitude is not this latitude, but do try to launch near the equator (Cape Canaveral is fine).
Bt Estimated burn duration in seconds.
2

C3 Orbital energy of escape asymptote. C3 = o

/1000

Cir The required delta velocity needed to circularize your orbit.

Dis Difference in radial distance from the reference planet traveled during a flight planned by the
Tangential Transfer program. Also the distance from the target in the Match Velocity mode of the
Orbital program.
dV Delta velocity, the difference in velocity of your ship to match a target orbit or velocity vector.
dVf The x component of a delta velocity vector.
dVp The y component of a delta velocity vector.
dVo The z component of a delta velocity vector.
Ecc The current eccentricity of your ships orbit.
EIn Escape Inclination or Ejection Inclination. The angle between your current velocity vector and
that of the target planets or moons velocity vector. Thus, in an off-plane transfer where you do
not do a plane change, you must start the flight with an EIn of zero.
EjA Angle between the velocity vectors (tangents) of the ships orbit and the transfer orbit at the
time of ejection.
EqI The current inclination of your ships orbit with respect to the equator.

69

GET Ground elapsed time. This is the ground elapsed time of any significant event in the flight
happens. You can set the start date (GET=0 at xxxxx.xxxx MJD or MM-DD-YYYY at HH:MM:SS)
via the IMFD configuration page.
Hed The heading that the Surface Launch Program recommends that you fly at in order to
achieve a minimum EIn (so you dont have to do a fuel-costly burn to fix it later).
Hint The estimated time to Periapsis in the reentry mode Base Approach program. Be sure to
get this value from the Map Program, accuracy set at 1.000.
InA Intercept angle. The angle between the velocity vector of ships orbit and the targets orbit at
the time of interception.
iV Inward delta velocity. A component of the escape velocity vector.
LAN Your ships current longitude of the ascending node.
Lat The latitude of a particular point in the flight (plane change, latitude of a base) with respect to
the Reference planet.
LPC Longitude of a plane change with respect to the reference planet.
Lon The longitude of a particular point in the flight (plane change, longitude of a base) with
respect to the Reference planet.
Min EqI The minimum equatorial inclination with which a program can generate a target orbit.
Max EqI The maximum equatorial inclination with which a program can generate a target orbit.
Num This is the number of passages over the target landing site at which you execute your
deorbit burn. Note that this number is AFTER the insertion burn. If Num is 2, then you should
perform your insertion burn as you pass over the base a third time. If Num is 0, then you should
do your deorbit burn right as you are passing over it the first time. So basically it is the number of
FULL orbits before making your deorbit burn.
oV Outward delta velocity. A component in the escape velocity vector. This is the component
that you want to be minimized for a more fuel efficient flight.
PeA Altitude of the periapsis of the orbit measured above the surface of the reference planet.
PeD Radial distance (from the center of the reference planet) of the periapsis of the current orbit.
Pet Time in seconds until reaching the periapsis.
PeV Predicted orbital velocity in meters/second at the periapsis.
PlC Estimated delta velocity required for a plane change maneuver.
Rad Distance from the center of the reference planet.
ReA Estimated reentry angle between your ships velocity vector and the atmosphere at the
altitude that you set (default 120k in Base Approach).
ReT Estimated time until you hit the altitude that you set (default 120k in Base Approach)
ReV Estimated velocity at the altitude that you set (default 120k in Base Approach).

70

RIn Angle between the orbital planes of either the target and the source, the target and your ship,
or the target and the hypothetical transfer orbit. Basically, it is the angle between two orbital
planes.
TEj Time in seconds until ejection, or time until a burn is performed (Base Approach, Slingshot).
Time The time as displayed by the Surface Launch Program until optimum launch time.
Tin Time in seconds until you intercept your target (closest passage).
Tn Time in seconds until the next node.
TOF Time of Flight, from orbit eject to orbit insertion.
Tot The combined magnitude of the components of a delta velocity vector. So, it is the total
magnitude of the delta velocity vector.
TtB Remaining estimated time to burn (assuming that the main engines are at 100%) in seconds.

71

Appendix B

Key commands
To be able to access the commands in a second column you must change the page with [PG]
Shift-I command. Open InterplanetaryMFD with the Shift-I command.
MNU
Shift-F
Prv
BV
PG
Shift-I
Nxt
Z+
REF
Shift-R
(+)
ZTGT
Shift-T
(-)
Src
MOD
Shift-M
Set
Cnt/Aux
PRJ
Shift-P
Adj
AB
Key commands for programs other than Map

Shift-1
Shift-2
Shift-3
Shift-4
Shift-5
Shift-6

MNU
Shift-F
Cnt
PG
Shift-I
Z+
REF
Shift-R
ZTGT
Shift-T
Sel
MOD
Shift-M
Dsp
PRJ
Shift-P
Azo
Key commands for Map program

Shift-1
Shift-2
Shift-3
Shift-4
Shift-5
Shift-6

Slf
SOI
Int
Plan
Find

Prv
Shift-1
Select previous variable
Nxt
Shift-2
Select next variable
+,Shift-3,4 Adjust variable
Set
Shift-5
Set variable manually
Adj
Shift-6
Change adjustment speed
Z+Shift-2,3 Change a zoom factor
Src
Shift-4
Setup source object
Cnt
Shift-5
Center the display in other position
AB
Shift-6
Enable/Disable autoburn
BV
Shift-1
Open/Close burn vector display
Aux
Shift-5
Auxiliary vector input for SBC
Key commands for programs other than Map

PG
Shift-I
Change a button list in right edge
MNU
Shift-F
Open program menu
TGT
Shift-T
Select target orbit
REF
Shift-R Select the reference planet
MOD
Shift-M Change a display mode Text/Graphics
PRJ
Shift-P Change the projection plane
Buttons available in a left edge

Sel
Shift-4
Select the periapis to use
Dsp
Shift-5
Display additional graphics in map
Azo
Shift-6
Enable or Disable autozoom feature
Slf
Shift-1
Display or Hide ships trajectory
Soi
Shift-2
Display the Sphere of influence
IPC
Shift-3
Include plane change in prediction
Plan
Shift-5
Switch flight planning mode on and off
Find
Shift-6
Find targets from the reference
Key commands for Map program

72

Appendix C
These are organized alphabetically by the planet or moon that you are flying FROM, then the
planet or moon that you are flying TO. Inputting the target to the planet you want to fly to should
set the reference and source up automatically, but if you want to double check, you can use these
flight plans. Note that this list does not contain Planet to Moon (Earth to Moon) or Moon to Planet
(Moon to Earth). Rather, it contains Planet to Planet and Moon to Moon.
Ariel to Miranda
Reference: Uranus
Source: Ariel
Target: Miranda
Ariel to Oberon
Reference: Uranus
Source: Ariel
Target: Oberon
Ariel to Titania
Reference: Uranus
Source: Ariel
Target: Titania
Ariel to Umbriel
Reference: Uranus
Source: Ariel
Target: Umbriel
Callisto to Ganymede
Reference: Jupiter
Source: Callisto
Target: Ganymede
Callisto to Europa
Reference: Jupiter
Source: Callisto
Target: Europa
Callisto to Io
Reference: Jupiter
Source: Callisto
Target: Io
Deimos to Phobos
Reference: Mars
Source: Deimos
Target: Phobos
Dione to Enceladus
Reference: Saturn
Source: Dione
Target: Enceladus
Dione to Hyperion
Reference: Saturn
Source: Dione
Target: Hyperion
Dione to Iapetus
Reference: Saturn
Source: Dione
Target: Iapetus
Dione to Mimas
Reference: Saturn
Source: Dione
Target: Mimas
Dione to Rhea
Reference: Saturn
Source: Dione
Target: Rhea
Dione to Tethys
Reference: Saturn
Source: Dione
Target: Tethys
Dione to Titan
Reference: Saturn
Source: Dione
Target: Titan

Earth to Jupiter
Reference: Sun
Source: Earth
Target: Jupiter
Earth to Mars
Reference: Sun
Source: Earth
Target: Mars
Earth to Mercury
Reference: Sun
Source: Earth
Target: Mercury
Earth to Neptune
Reference: Sun
Source: Earth
Target: Neptune
Earth to Pluto
Reference: Sun
Source: Earth
Target: Pluto
Earth to Saturn
Reference: Sun
Source: Earth
Target: Saturn
Earth to Uranus
Reference: Sun
Source: Earth
Target: Uranus
Earth to Venus
Reference: Sun
Source: Earth
Target: Venus
Enceladus to Dione
Reference: Saturn
Source: Enceladus
Target: Dione
Enceladus to Hyperion
Reference: Saturn
Source: Enceladus
Target: Hyperion
Enceladus to Iapetus
Reference: Saturn
Source: Enceladus
Target: Iapetus
Enceladus to Mimas
Reference: Saturn
Source: Enceladus
Target: Mimas
Enceladus to Rhea
Reference: Saturn
Source: Enceladus
Target: Rhea
Enceladus to Tethys
Reference: Saturn
Source: Enceladus
Target: Tethys
Enceladus to Titan
Reference: Saturn
Source: Enceladus
Target: Titan

73

Europa to Callisto
Reference: Jupiter
Source: Europa
Target: Callisto
Europa to Ganymede
Reference: Jupiter
Source: Europa
Target: Ganymede
Europa to Io
Reference: Jupiter
Source: Europa
Target: Io
Ganymede to Callisto
Reference: Jupiter
Soruce: Ganymede
Target: Callisto
Ganymede to Europa
Reference: Jupiter
Soruce: Ganymede
Target: Europa
Ganymede to Io
Reference: Jupiter
Soruce: Ganymede
Target: Io
Hyperion to Dione
Reference: Saturn
Source: Hyperion
Target: Dione
Hyperion to Enceladus
Reference: Saturn
Source: Hyperion
Target: Enceladus
Hyperion to Iapetus
Reference: Saturn
Source: Hyperion
Target: Iapetus
Hyperion to Mimas
Reference: Saturn
Source: Hyperion
Target: Mimas
Hyperion to Rhea
Reference: Saturn
Source: Hyperion
Target: Rhea
Hyperion to Tethys
Reference: Saturn
Source: Hyperion
Target: Tethys
Hyperion to Titan
Reference: Saturn
Source: Hyperion
Target: Titan
Iapetus to Dione
Reference: Saturn
Source: Iapetus
Target: Dione
Iapetus to Enceladus
Reference: Saturn
Source: Iapetus
Target: Enceladus

Iapetus to Hyperion
Reference: Saturn
Source: Iapetus
Target: Hyperion
Iapetus to Mimas
Reference: Saturn
Source: Iapetus
Target: Mimas
Iapetus to Rhea
Reference: Saturn
Source: Iapetus
Target: Rhea
Iapetus to Tethys
Reference: Saturn
Source: Iapetus
Target: Tethys
Iapetus to Titan
Reference: Saturn
Source: Iapetus
Target: Titan
Io to Callisto
Reference: Jupiter
Source: Io
Target: Callisto
Io to Europa
Reference: Jupiter
Source: Io
Target: Europa
Io to Ganymede
Reference: Jupiter
Source: Io
Target: Ganymede
Jupiter to Earth
Reference: Sun
Source: Jupiter
Target: Earth
Jupiter to Mars
Reference: Sun
Source: Jupiter
Target: Mars
Jupiter to Mercury
Reference: Sun
Source: Jupiter
Target: Mercury
Jupiter to Neptune
Reference: Sun
Source: Jupiter
Target: Neptune
Jupiter to Pluto
Reference: Sun
Source: Jupiter
Target: Pluto
Jupiter to Saturn
Reference: Sun
Source: Jupiter
Target: Saturn
Jupiter to Uranus
Reference: Sun
Source: Jupiter
Target: Uranus
Jupiter to Venus
Reference: Sun
Source: Jupiter
Target: Venus
Mars to Earth
Reference: Sun
Source: Mars
Target: Earth

Mars to Jupiter
Reference: Sun
Source: Mars
Target: Jupiter
Mars to Mercury
Reference: Sun
Source: Mars
Target: Mercury
Mars to Neptune
Reference: Sun
Source: Mars
Target: Neptune
Mars to Pluto
Reference: Sun
Source: Mars
Target: Pluto
Mars to Saturn
Reference: Sun
Source: Mars
Target: Saturn
Mars to Uranus
Reference: Sun
Source: Mars
Target: Uranus
Mars to Venus
Reference: Sun
Source: Mars
Target: Venus
Mercury to Earth
Reference: Sun
Source: Mercury
Target: Earth
Mercury to Jupiter
Reference: Sun
Source: Mercury
Target: Jupiter
Mercury to Mars
Reference: Sun
Source: Mercury
Target: Mars
Mercury to Neptune
Reference: Sun
Source: Mercury
Target: Neptune
Mercury to Pluto
Reference: Sun
Source: Mercury
Target: Pluto
Mercury to Saturn
Reference: Sun
Source: Mercury
Target: Saturn
Mercury to Uranus
Reference: Sun
Source: Mercury
Target: Uranus
Mercury to Venus
Reference: Sun
Source: Mercury
Target: Venus
Mimas to Dione
Reference: Saturn
Source: Mimas
Target: Dione
Mimas to Enceladus
Reference: Saturn
Source: Mimas
Target: Enceladus

74

Mimas to Hyperion
Reference: Saturn
Source: Mimas
Target: Hyperion
Mimas to Iapetus
Reference: Saturn
Source: Mimas
Target: Iapetus
Mimas to Rhea
Reference: Saturn
Source: Mimas
Target: Rhea
Mimas to Tethys
Reference: Saturn
Source: Mimas
Target: Tethys
Mimas to Titan
Reference: Saturn
Source: Mimas
Target: Titan
Miranda to Ariel
Reference: Uranus
Source: Miranda
Target: Ariel
Miranda to Oberon
Reference: Uranus
Source: Miranda
Target: Oberon
Miranda to Titania
Reference: Uranus
Source: Miranda
Target: Titania
Miranda to Umbriel
Reference: Uranus
Source: Miranda
Target: Umbriel
Neptune to Earth
Reference: Sun
Source: Neptune
Target: Earth
Neptune to Jupiter
Reference: Sun
Source: Neptune
Target: Jupiter
Neptune to Mars
Reference: Sun
Source: Neptune
Target: Mars
Neptune to Mercury
Reference: Sun
Source: Neptune
Target: Mercury
Neptune to Pluto
Reference: Sun
Source: Neptune
Target: Pluto
Neptune to Saturn
Reference: Sun
Source: Neptune
Target: Saturn
Neptune to Uranus
Reference: Sun
Source: Neptune
Target: Uranus
Neptune to Venus
Reference: Sun
Source: Neptune
Target: Venus

Nereid to Proteus
Reference: Uranus
Source: Nereid
Target: Proteus
Nereid to Triton
Reference: Uranus
Source: Nereid
Target: Triton
Phobos to Deimos
Reference: Mars
Source: Phobos
Target: Deimos
Pluto to Earth
Reference: Sun
Source: Pluto
Target: Earth
Pluto to Jupiter
Reference: Sun
Source: Pluto
Target: Jupiter
Pluto to Mars
Reference: Sun
Source: Pluto
Target: Mars
Pluto to Mercury
Reference: Sun
Source: Pluto
Target: Mercury
Pluto to Neptune
Reference: Sun
Source: Pluto
Target: Neptune
Pluto to Saturn
Reference: Sun
Source: Pluto
Target: Saturn
Pluto to Uranus
Reference: Sun
Source: Pluto
Target: Uranus
Pluto to Venus
Reference: Sun
Source: Pluto
Target: Venus
Proteus to Nereid
Reference: Uranus
Source: Proteus
Target: Nereid
Nereid to Triton
Reference: Uranus
Source: Nereid
Target: Triton
Rhea to Dione
Reference: Saturn
Source: Rhea
Target: Dione
Rhea to Enceladus
Reference: Saturn
Source: Rhea
Target: Enceladus
Rhea to Hyperion
Reference: Saturn
Source: Rhea
Target: Hyperion
Rhea to Iapetus
Reference: Saturn
Source: Rhea
Target: Iapetus

Rhea to Mimas
Reference: Saturn
Source: Rhea
Target: Mimas
Rhea to Tethys
Reference: Saturn
Source: Rhea
Target: Tethys
Rhea to Titan
Reference: Saturn
Source: Rhea
Target: Titan
Saturn to Earth
Reference: Sun
Source: Saturn
Target: Earth
Saturn to Jupiter
Reference: Sun
Source: Saturn
Target: Jupiter
Saturn to Mars
Reference: Sun
Source: Saturn
Target: Mars
Saturn to Mercury
Reference: Sun
Source: Saturn
Target: Mercury
Saturn to Neptune
Reference: Sun
Source: Saturn
Target: Neptune
Saturn to Pluto
Reference: Sun
Source: Saturn
Target: Pluto
Saturn to Uranus
Reference: Sun
Source: Saturn
Target: Uranus
Saturn to Venus
Reference: Sun
Source: Saturn
Target: Venus
Tethys to Dione
Reference: Saturn
Source: Tethys
Target: Dione
Tethys to Enceladus
Reference: Saturn
Source: Tethys
Target: Enceladus
Tethys to Hyperion
Reference: Saturn
Source: Tethys
Target: Hyperion
Tethys to Iapetus
Reference: Saturn
Source: Tethys
Target: Iapetus
Tethys to Mimas
Reference: Saturn
Source: Tethys
Target: Mimas
Tethys to Rhea
Reference: Saturn
Source: Tethys
Target: Rhea

75

Tethys to Titan
Reference: Saturn
Source: Tethys
Target: Titan
Titan to Dione
Reference: Saturn
Source: Titan
Target: Dione
Titan to Enceladus
Reference: Saturn
Source: Titan
Target: Enceladus
Titan to Hyperion
Reference: Saturn
Source: Titan
Target: Hyperion
Titan to Iapetus
Reference: Saturn
Source: Titan
Target: Iapetus
Titan to Mimas
Reference: Saturn
Source: Titan
Target: Mimas
Titan to Rhea
Reference: Saturn
Source: Titan
Target: Rhea
Titan to Tethys
Reference: Saturn
Source: Titan
Target: Tethys
Titania to Ariel
Reference: Uranus
Source: Titania
Target: Ariel
Titania to Miranda
Reference: Uranus
Source: Titania
Target: Miranda
Titania to Oberon
Reference: Uranus
Source: Titania
Target: Oberon
Titania to Umbriel
Reference: Uranus
Source: Titania
Target: Umbriel
Triton to Nereid
Reference: Uranus
Source: Triton
Target: Nereid
Triton to Proteus
Reference: Uranus
Source: Triton
Target: Proteus
Umbriel to Ariel
Reference: Uranus
Source: Umbriel
Target: Ariel
Umbriel to Miranda
Reference: Uranus
Source: Umbriel
Target: Miranda
Umbriel to Oberon
Reference: Uranus
Source: Umbriel
Target: Oberon

Umbriel to Titania
Reference: Uranus
Source: Umbriel
Target: Titania
Uranus to Earth
Reference: Sun
Source: Uranus
Target: Earth
Uranus to Jupiter
Reference: Sun
Source: Uranus
Target: Jupiter
Uranus to Mars
Reference: Sun
Source: Uranus
Target: Mars
Uranus to Mercury
Reference: Sun
Source: Uranus
Target: Mercury
Uranus to Neptune
Reference: Sun
Source: Uranus
Target: Neptune
Uranus to Pluto
Reference: Sun
Source: Uranus
Target: Pluto
Uranus to Saturn
Reference: Sun
Source: Uranus
Target: Saturn
Uranus to Venus
Reference: Sun
Source: Uranus
Target: Venus
Venus to Earth
Reference: Sun
Source: Venus
Target: Earth
Venus to Jupiter
Reference: Sun
Source: Venus
Target: Jupiter
Venus to Mars
Reference: Sun
Source: Venus
Target: Mars
Venus to Mercury
Reference: Sun
Source: Venus
Target: Mercury
Venus to Neptune
Reference: Sun
Source: Venus
Target: Neptune
Venus to Pluto
Reference: Sun
Source: Venus
Target: Pluto
Venus to Saturn
Reference: Sun
Source: Venus
Target: Saturn
Venus to Uranus
Reference: Sun
Source: Venus
Target: Uranus

76

Appendix D
This is a summary of all programs. It is also a description of when to use each one.
Map Program
Information: The Map Program is really not used to plan any trajectories. Rather, it predicts
them and displays them. It uses a special trajectory prediction method that allows for extremely
accurate predictions.
Used to:
Display your orbit and your targets orbit
Provide very accurate data on many different properties of your trajectory
Appropriate to use when:
You are out of a Planet or Moons SOI
You need an accurate periapsis prediction
You want to see where your trajectory is taking you
You need an accurate prediction of almost anything, from Periapsis Velocity to Delta
Velocity required to circularize an orbit
Not appropriate to use when:
No instances where the Map Program really is not useful.
Helpful Hints:
Set up the Reference to the body that everything is orbiting (you, the body you left, and
your target object).
Set target to your target.
Hit the SOI button and use CNT to center your spacecraft to see when you cross inside a
planets SOI.
Hmmm, Why is it that I have outer planets installed with all 62 of jupiters moons, and I
see the grey circles around Jupiter on the Map Program but there are only green orbits
displayed for the four Galilean Moons? If this happens anywhere, you might want to
decrease the Mass Limit in the configuration page. All objects will be displayed as little
grey circles, but only objects with a mass greater than the mass limit will have an orbit
displayed. The minimum value for Mass Limit is 1e15.
The Base Approach or Planet Approach Program may not give you entirely accurate
predictions of PeA (altitude of periapsis). For the most accurate prediction possible by
IMFD, set the Accuracy to 1.000 in the Map Configuration Page.
When far from a planet, predictions made by the Map Program of values such as PeA
(Altitude of Periapsis) and PeT (Time to Periapsis) will be much more accurate than
those made by MFDs such as Orbit MFD. However, as you get closer to a planet, Orbit
MFD becomes more accurate, and can be used.
Target Intercept Program
Information: The Target Intercept Program is used to calculate your trajectory from one celestial
body to another. It uses special trajectory prediction methods, and is extraordinarily accurate. Be
careful, though, because the target it heads you for is the very center of the planet!!
Used to: Predict trajectories, plan flights, perform midcourse corrections, set up free return
trajectories.
Appropriate to use when:
Making a Planet to Moon trip (Earth to Moon)
Making a Planet to Planet trip (Earth to Saturn)
Making a Moon to Moon trip (Europa to Io)
Performing a midcourse correction far from a planet (outside its SOI)
Viewing important information such as time to target intercept, and viewing a diagram of
you, your target, and the planet or moon you left.
Not appropriate to use when:
Making a midcourse correction close to a planet. As stated above, the Target Intercept
Program will try to make you head for the dead center of a planet.

77

 Making a Moon to Planet trip (Moon to Earth, Phobos to Mars, etc.)

Helpful Hints:
The Reference is the object that the body you leave and your target object both orbit
(Reference is the Sun for an Earth to Mars trip because Earth and Mars orbit the sun).
The Source is the object that you leave (For the same trip Source would be Earth
because you leave the Earth).
Target is the object you are trying to get to (For the same trip Target would be Mars
because that is where you are going)
Whenever you leave a Planets SOI, ALWAYS SET THE SOURCE TO YOURSELF!!!!!!!
You can do this by pressing the SCR button and inputting x without the quotations.
After you are just outside a planets SOI, and you set the source to yourself, you might
find the dV value (delta velocity for midcourse correction) quite large. This is because
you are still near the planet. Time warp until dV hits a minimum value and starts to climb,
THEN perform your first midcourse correction.
It is inefficient to just launch to any planet whenever you want. Open up Target Intercept,
set your Target, Source, and Reference, open doors so the crew can breathe for a long
time (DGIV, XR series) and open your radiator or turn on External cooling so you dont
overheat (XR series), and time warp at 100,000x until oV hits a minimum and starts
climbing. This is the day you should go to your desired planet.
Off-Plane is often the most inefficient way to get to a planet. If you are going for
efficiency, use Target Plane, Two Plane, or Source Plane.
After setting the source to yourself when using Target Plane, set the mode to manual
target!!! There is a bug that will allow the line of nodes to rotate, always keeping you 90
degrees from your plane change.
Tangential Transfer Program
Information: This program is not used very often.
Appropriate to use when:
You are trying to make a transfer with the minimum delta velocity.
Not appropriate to use when:
You want to get to a planet quickly and dont feel like spending 20 minutes finding a
perfect launch time.
Helpful Hints:
You may want to use the SET button instead of the + and buttons, because often times
you will have to adjust TEj a HUGE amount and you would be holding down the + and
buttons for a very long time.
Planet Approach Program
Information: This program is useful when you are approaching a planet. It allows you to set up
select orbital elements for your approach orbit, and thus it is more efficient than eyeballing your
approach via Map MFD and Orbit MFD.
Appropriate to use when:
You are near a planet (inside or just outside its SOI). You can do your first correction
burn far from the SOI to minimize the dV of later correction burns, but your first burn may
be inaccurate if you are too far.
You want to orbit a planet a certain number of times and then land perfectly aligned with
a base.
You want to see a diagram of what your approach orbit looks like.
You are planning a trip from a moon to a planet.
Not appropriate to use when:
You are not near your target planet
Any mid course corrections far from your target planet. For this use the Target Intercept
Program.
You are too close to a planet. If you wait until you get too close to a planet to perform the
burn to set up your planet approach, the dV value will be astronomically high.

78

Helpful Hints:
Set up and perform the first burn when you are outside the planets Sphere of Influence.
It will be inaccurate but it will decrease the magnitude of the upcoming burns.
Do several burns (Autoburn) in the course of approaching a planet; this keeps dV low.
Once dV gets high and you get close to a planet, it can begin to increase very rapidly.
Orbit Insert Program
Information: This program is used to do a capture burn from a hyperbolic orbit.
Appropriate to use when:
You are near a planet with a hyperbolic orbit, and you want the computer to do your
insertion burn for you instead of doing it manually so it is more accurate.
Not appropriate to use when:
Every other instance other than the one listed above.
Helpful Hints:
USE IMFD V4.2.1!!!!!!!! The Orbit Insert program in the later versions of IMFD is highly
inaccurate, and it decreases your periapsis dramatically. For best results, have the
current version of IMFD AND version 4.2.1. Use 4.2.1 for Orbit Insert and the latest
version for everything else.
You should execute Autoburn far from the actual point it will perform your insertion burn.
Autoburn controls time warp automatically, so you never have to worry about passing the
planet by mistake because you forgot to turn down the time warp.
Delta Velocity Program
Information: This program is used to autoburn a set delta velocity value. It is rarely used.
Appropriate to use when:
You want an automated burn for a specific amount of delta velocity
Not appropriate to use when:
Performing ejection burns
Performing insertion burns
Performing midcourse corrections
Basically, there is no real need to ever use this program.
Orbital Program
Information: This program does several very useful things when you are in orbit.
Appropriate to use when:
You want to circularize your orbit at your CURRENT altitude.
You want to match the velocity with a target orbiting with a low relative velocity to you so
you can intercept it (Martian moon, space station, etc.)
You want to center a target in your front windshield.
Not appropriate to use when:
You are flying between two bodies that have their own gravity (planet to planet, planet to
moon EXCEPT for situations similar to Phobos, Deimos, tiny moons close to outer
planets such as Amalthea). Use Planet Approach and Orbit Insert to enter orbit around
these larger bodies. So any moon that you cannot orbit around (Phobos, Deimos, tiny
moons close to outer planets such as Amalthea) you should use the Match Velocity Mode
and then land on the moon much as if it were a space stationmove slowly towards it; its
gravity will not tug you towards it.
Helpful Hints:
The circularize orbit mode will circularize your orbit at the altitude when the engines start
firing. It will not wait for you to reach apoapsis or periapsis. When you hit autoburn, the
burn starts immediately.
If you want to put a space station into view, and dont want to cheat by using
planetarium mode, use the Find Target mode.
Surface Launch Program

79

Information: This program helps you launch into a low orbit that is nearly ready to be ejected
from.
Appropriate to use when:
You are on the ground waiting to launch.
You are ascending from the source planet (going to low earth orbit for an earth to mars
trip)
Not appropriate to use when:
You are in orbit around anything anywhere. Basically, only use this program for the
above cases.
Helpful Hints:
You can launch at any time. For the lowest EIn when you launch, wait until the yellow
number counting down seconds reaches zero. This will happen twice per simulator day.
Leave this program up throughout your entire ascent. You can add left or right nose slip
to keep the EIn number at a minimum.
Orbit Eject Program
Information: This program is used to eject from a low orbit onto an orbit created by another
program.
Appropriate to use when:
You are in low orbit around a planet or moon, ready to eject to travel to your target planet
or moon.
Not appropriate to use when:
Any other circumstance other than the one listed above.
Helpful Hints:
Always use Off-Axis mode when you perform a long ejection burn. Then, after it has
completed, switch to realtime mode and hit autoburn again to correct any mistake that the
Autoburn made the first time. With very long burns, it is likely that Autoburn will not be
able to make it perfectly.
Although you can get data from the Course, Base Approach, and Slingshot programs,
you rarely use the latter two optionswhen flying to another planet, you almost always
set up a course plan with target intercept, use surface launch to get into a low orbit, and
use orbit eject to get on your way.
Base Approach
Information: Base Approach is used when you want to do a direct landing when you arrive at a
planet, so you will not do an insertion burn and a deorbit burn. Either you will do a direct reentry
(eliminating both of the above mentioned burns) or you will combine them (such as when you are
approaching Brighton Beach on the Moon) into one long burn.
Appropriate to use when:
You are very far away from a planet.
You want to land directly and not orbit the target planet or moon.
Not appropriate to use when:
You are making a midcourse correction VERY far from a planet. Use the Target Intercept
Program to make midcourse corrections.
You want to orbit the target planet for some time (maybe for some sightseeing )
Any other instance other than the ones mentioned in the Appropriate to use when list.
Helpful Hints:
You will not find a solution every time. If the program cannot find a solution, then no
target orbit (purple) is displayed.
dV may be very large. This is the price to pay for landing directly. Again, if you do your
first burn far away from the planet and use several smaller burns as you get closer, the
dV is minimized.
Hint is time to periapsis. Do not trust Orbit MFD or anything else. Use the Map Program,
with the accuracy set to 1.000.

80

Set Ant to 90 degrees for winged vehicles (DGIV, XR series, etc.) when approaching the
Earth from the moon (elliptical). Set it to 120-160 degrees when approaching Earth from
another planet (hyperbolic)
This program basically alters your orbit, thus altering the time at which your ship crosses
the periapsis of a planet. As a result, you will find that it works best with planets with a
fast rotation because a base on the surface will pass under your reentry or landing zone
more often during your approach. It is difficult to get this program to work with planets or
moons that rotate slowly.

Slingshot Program
Information: This program is used to change your course target by setting up a slingshot around
a planet.
Appropriate to use when:
You are performing a slingshot around one planet enroute to another.
Not appropriate to use when:
Any other instance other than the case mentioned above. This program will not plan a
slingshot, it will simply set it up and autoburn so that your ship will fly by the planet on its
way to the next planet.
Helpful Hints:
Once again, if you do your first burn far away from the planet and use several smaller
burns as you get closer, the dV is minimized.
If doing slingshots around gas giants, once you are out of their SOI and you switch the
source to self in target intercept, you may find dV quite high. That is because they are
still influencing your orbit. Time warp until dV reaches a minimum and begins to climb,
THEN perform your midcourse correction.
Slingshots are rarely more efficient than a direct transfer orbit (unless you are NASA and
you calculate to launch on a very specific date when the planets are perfectly aligned for
you). If you want to do a good slingshot, why not use NASAs dates? For example, do
an Earth to Jupiter to Saturn around the time that Voyager 1 did it. Use Scenario Editor
to go back in time.

81

Appendix E
These are brief checklists designed for quick reference. To see any one in more detail, please
see the in which the checklist is described (these are written in much more detail).

Course Setup (Off Plane, Planet to Planet)

Example: Set up an Earth to Mars Transfer
Open IMFD
Select Course
Select Target Intercept. Since we are traveling from a planet to another planet, this is our
navigation tool of choice.
Set Target as Mars because this is where we are going.
Check Reference is Sun and Source is Earth because the Sun is orbited by both the
Earth and Mars (Reference), and we are leaving Earth (Source).
Check that the Transfer Mode is Off-Plane. This is the easiest way to get there.
In Target Intercept, Lock TOF. This is so that when we adjust TEj, TIn will adjust at the
same rate, keeping our time of flight constant.
Advance TEj until dV is minimized (I use 10x adjustments on the MJD to advance one
day per click).
Unlock TOF
Adjust TIn to minimize dV
Alternately adjust TEj and TIn to further minimize the dV.
Use scenario editor (or time warp) to advance time until one week before launch (for
distant windows, also stop one month prior to launch)
Again, alternately adjust TEj and TIn to adjust for inaccuracies in original predictions
(IMFD gets more accurate over shorter times, so dV will have changed a bit)
Fast forward to launch.
Return to normal time when TEj says 10,000. That is the approximate number of
seconds that you will be in orbit around Earth before you leave for Mars (gives you plenty
of time to circularize your orbit, align planes, etc.)
Congratulations! You have a flight plan to Mars.

Course Setup (Off Plane, Moon to Moon)Playback 3

Example: Set up an Io to Callisto Transfer
Open IMFD
Select Course
Select Target Intercept. Since we are traveling from a moon to another moon, this is our
navigation tool of choice.
Set Target as Callisto
Check Reference is Jupiter and Source is Io because Jupiter is orbited by both the Io and
Callisto (Reference), and we are leaving Io (Source).
Check that the Transfer Mode is Off-Plane. This is the easiest way to get there.
In Target Intercept, Lock TOF. This is so that when we adjust TEj, TIn will adjust at the
same rate, keeping our time of flight constant.
Advance TEj until dV is minimized (I use 10x adjustments on the MJD to advance one
day per click).
Unlock TOF
Adjust TIn to minimize dV
Alternately adjust TEj and TIn to further minimize the dV.
Use scenario editor (or time warp) to advance time until one week before launch (for
distant windows, also stop one month prior to launch)

82

Again, alternately adjust TEj and TIn to adjust for inaccuracies in original predictions
(IMFD gets more accurate over shorter times, so dV will have changed a bit)
Fast forward to launch.
Return to normal time when TEj says 10,000. That is the approximate number of
seconds that you will be in orbit before you leave for Callisto (gives you plenty of time to
circularize your orbit, align planes, etc.)
Congratulations! You have a flight plan to Callisto.

Course Setup (Off Plane, Planet to Moon)Playback 2

Example: Set up an Earth to Moon Transfer
Open IMFD
Select Course
Select Target Intercept. Since we are traveling from a planet to a moon, this is our
navigation tool of choice.
Set Target as Moon. Once you do this, the purple orbit will begin to swivel, shrinking
and growing continually.
Set TEj to 0. This will stop it from shrinking and growing.
Check that the Reference is Earth (because this is the object that the target and source
are orbiting around) and check that the Source is your spacecraft (in a Planet to Moon
Transfer, the source must be yourself).
Set the TIn to your desired time until intercept PLUS 6000 seconds. A good value for this
would be 400,000 seconds. This six thousand seconds should be under TEj, but a bug
causes the orbit to shrink and grow unless TEj is set to zero. So, we must account for
the 6000 seconds in the TIn.
Go to the Surface Launch Program.
Hilight the Course item and hit + until it says Lunar Off-Plane. This is the mode of
surface Launch you must use when you do a Planet to Moon transfer.
Input Moon as the Target (it will prompt you to do so when Lunar Off-Plane is selected).
Wait for Time to reach zero, and take off, and enter orbit. You are ready for your orbit
ejection!

Course Setup (Off Plane, Moon to Planet)Playback 4

Example: Set up Moon to Earth Transfer
Open IMFD
Select Planet Approach. Since this is a moon to planet flight, we must use planet
approach.
Set the Source to Moon. The display should now change. We did this because we are
leaving from the Moon.
Check Target Equator and Reference Earth. The Earth is the thing that the source and
target are moving around (Reference) and the target is the Equator so we can set the
inclination with respect to the equator, which makes things easier.
You can set up desired values of your Earth orbit (PeA, Equitorial inclination, etc.) but this
is not completely necessary.
Congratulations! You have planned a Moon to Earth Transfer.

Course Setup (Planar Transfer, Planet to Planet)Playback 5

Example: Set up an Earth to Mars Transfer
Open IMFD
Select Course
Select Target Intercept. Since we are traveling from a planet to another planet, this is our
navigation tool of choice.

83

Set Target as Mars because this is where we are going.

Check Reference is Sun and Source is Earth because the Sun is orbited by both the
Earth and Mars (Reference), and we are leaving Earth (Source).
Check that the Transfer Mode is either Target Plane, Two Plane, or Source Plane. It is
recommended that you use Two Plane or Source Plane, not Target Plane.
In Target Intercept, Lock TOF. This is so that when we adjust TEj, TIn will adjust at the
same rate, keeping our time of flight constant.
Advance TEj until dV is minimized (I use 10x adjustments on the MJD to advance one
day per click).
Unlock TOF
Adjust TIn to minimize dV
Alternately adjust TEj and TIn to further minimize the dV.
Use scenario editor (or time warp) to advance time until one week before launch (for
distant windows, also stop one month prior to launch)
Again, alternately adjust TEj and TIn to adjust for inaccuracies in original predictions
(IMFD gets more accurate over shorter times, so dV will have changed a bit)
Fast forward to launch.
Return to normal time when TEj says 10,000. That is the approximate number of
seconds that you will be in orbit before you leave for Mars (gives you plenty of time to
circularize your orbit, align planes, etc.)
Congratulations! You have a flight plan to Mars.

Course Setup (Planar Transfer, Moon to Moon)

Example: Set up an Io to Callisto Transfer
Open IMFD
Select Course
Select Target Intercept. Since we are traveling from a moon to another moon, this is our
navigation tool of choice.
Set Target as Callisto
Check Reference is Jupiter and Source is Io because Jupiter is orbited by both the Io and
Callisto (Reference), and we are leaving Io (Source).
Check that the Transfer Mode is either Target Plane, Two Plane, or Source Plane. It is
recommended that you use Two Plane or Source Plane, not Target Plane.
In Target Intercept, Lock TOF. This is so that when we adjust TEj, TIn will adjust at the
same rate, keeping our time of flight constant.
Advance TEj until dV is minimized (I use 10x adjustments on the MJD to advance one
day per click).
Unlock TOF
Adjust TIn to minimize dV
Alternately adjust TEj and TIn to further minimize the dV.
Use scenario editor (or time warp) to advance time until one week before launch (for
distant windows, also stop one month prior to launch)
Again, alternately adjust TEj and TIn to adjust for inaccuracies in original predictions
(IMFD gets more accurate over shorter times, so dV will have changed a bit)
Fast forward to launch.
Return to normal time when TEj says 10,000. That is the approximate number of
seconds that you will be in orbit before you leave for Callisto (gives you plenty of time to
circularize your orbit, align planes, etc.)
Congratulations! You have a flight plan to Callisto.

Surface LaunchPlaybacks 2,3,4,5,6,7

84

Example: Launch to Low Earth Orbit before going to Mars. Note that this assumes you have
completed some type of Earth to Mars Transfer setup.
Open IMFD
Select Surface Launch. Since we are on the ground launching to LEO, Surface Launch
is the Program of choice.
Check that it says Course-Program in the top right hand corner. This means that the
program will gather data from the Course Program.
Set the Altitude to the altitude that you want your orbit to be at. For Earth, it should be
above 200k, and for Mars, above 100k. This is to avoid an orbit inside the atmosphere.
Time warp slowly until the time says about 300s (5 minutes to takeoff), and return to
normal time.
Prepare your vessel for takeoff.
When it hits zero, engage main engines and take off. Fly the heading that the Surface
Launch Program displayed as Hed.
Introduce nose side slip to keep EIn as low as possible. This saves us from using fuel
trying to fix it later.
Perform MECO when in orbit.
Contratulations! You are in orbit ready to go!

Orbit EjectPlaybacks 3,4,5,6,7

Example: Eject from Earth Orbit to go to Mars. This assumes that you have completed some
type of Earth to Mars Transfer setup AND you have launched into a low earth orbit.
Open IMFD
Open the Orbit Eject Program. We are in orbit, ready to eject, so this is the program of
choice.
Highlight the item in the top right hand corner and change it from Higher-Orbit to Course.
We want Orbit Eject receiving data from the Course Program.
Hit the NXT button and change from Realtime to Off-Axis. Since this is a long duration
burn, Off-Axis mode is the method of choice.
Now time warp until you hit a node. Turn Orbit Normal or Orbit Anti-normal, and engage
main engines. Note that IMFD does not tell you which way to turn, so you must guess.
Your goal is to get EIn down to zero, because this is Eject Inclination and we want it as
low as possible. When it is zero, MECO.
Now time warp until you are about a third of an orbit away from your eject point (solid
green line is about a third of an orbit away from the dotted green line), return to normal
time, and hit Autoburn.
Time Warp to 100x. Autoburn will slow down time, and execute the burn.
Leave the Orbit Eject program up.
Congratulations, you are on your way to Mars!
Leaving a Planets SOIPlaybacks 1,3,4,5,6,7
Example: Eject from Earth Orbit to go to Mars. This assumes that you have completed some
type of Earth to Mars Transfer setup, you have launched into a low earth orbit, AND you have
ejected from Low Earth Orbit.
IMFD should be open, and set to the Target Intercept Program.
IMFD should be open on the other side too, with the Orbit Eject Program running.
When the Orbit Eject Program displays a message that says Have a nice voyage! set
the source in the Target Intercept to Program (SRC input x without the quotations) and
hit MNU to change the MFD with Orbit Eject to Map Program.
Time warp carefully until dV hits a low point and starts increasing again, and then hit
Autoburn to execute your first Midcourse Correction (All in the MFD with Target
Intercept).

85

Congratulations! You have left a planets SOI!

Midcourse CorrectionPlaybacks 1,2,3,4,5,6,7

Example: Perform a midcourse correction en route to Mars from Earth. This assumes that
you have completed some type of Earth to Mars Transfer setup, you have launched into a
low earth orbit, AND you have ejected from Low Earth Orbit.
IMFD should be open, and set to the Target Intercept Program.
Check that Source is set to Self.
Hit the Autoburn Button.
Congratulations! You have made a midcourse correction!

Midcourse Correction Special CasePlane Change ManeuverPlaybacks 5,6,7

Example: Perform a plane change maneuver en route to Mars from Earth. This assumes that
you have completed some type of Earth to Mars Planar Transfer setup, you have launched
into a low earth orbit, you have ejected from Low Earth Orbit, AND you are well out of the
Earths SOI.
IMFD should be open, and set to the Target Intercept Program.
You should see a number, Tn (Time to Node). Time warp until you are about 1800s
(about half an hour) away from the Node.
Scroll down to Prep. PlC using the NXT and PRV buttons.
Hit the + button. This turns on Prep. PlC, and the course program begins to prepare for
the plane change maneuver.
Hit Autoburn, and time warp to 100x. Let Autoburn do the rest.
Congratulations! You have just completed your plane change maneuver!
Note that now that you have done your plane change maneuver, the Target Intercept
Program will act as if it were in Off-Plane Mode.

Planet Approach SetupPlaybacks 6,7

Example: Set up your approach to Mars. You should have a PeT of about 400,000 seconds
(get this value from the Map Program!!!)
Open IMFD.
Select the Planet Approach Program. Since you are approaching a planet but not doing
a direct landing or direct reentry, this is the program of choice.
Set the Reference to Mars. This tells the program that you are approaching Mars.
Set the Target to Equator. This allows us to use Equatorial Inclination as opposed to
Ecliptic Inclination, making our lives easier.
Use NXT and PRV, and +, -, or SET to set values for your PeA (Altitude of Periapsis) and
EqI (Equatorial Inclination) to what you desire. You must set EqI to a latitude higher than
the base you intend to land on, if you intend to land.
Execute the Autoburn Button.
Congratulations! You are now approaching Mars!
Now, you must time warp slowly and keep an eye on dV. It will start to increase. Every
once in a while, hit Autoburn again (maybe every time it gets above 100). Careful as it
increases at a dramatic rate as you get close to the planet.

Orbit InsertPlaybacks 1,2,3,4,5,6,7

Example: Perform a capture burn to enter low Mars orbit. You should have a PeT of about
1800 seconds and be approaching Mars with a hyperbolic orbit (Eccentricity greater than 1).
Since we are close to the planet, most MFDs will have an accurate prediction of PeT, and
you do not NEED to use the Map Program for this prediction (You can use Orbit MFD).

86

Open IMFD V 4.2.1. You must use this version of IMFD for Orbit Insert!!! The later
versions (5.0, 5.3, etc) do not work very well.
In IMFD 4.2.1, Select the Course button. The Orbit Insert Program is located here.
Select Orbit Insert. TtB should be less than 1800 seconds, as you are nearing your
periapsis.
Set desired ApD (Radial Distance of Apoapsis) OR Eccentricity. When you change one,
the other one also changes. For a perfectly circular orbit, just set Eccentricity (Ecc) to
zero. You cannot control your PeA (Altitude of Periapsis).
Engage Autoburn.
Time warp to 100x. Let Autoburn slow time automatically (which it will do, dont worry)
and let it perform the burn. Watch dV.
When the engines shut off, there will probably still be some dV left. Switch to Burn
Vector View by hitting the BV button, rotating towards the grey cross, and engaging main
engines until dV nears zero.
Congratulations, you are in low orbit!!

Base Approach SetupPlaybacks 1,3,4,5,6

Example: Set up your approach to Olympus Base. You should have a PeT of about 500,000
seconds (get this value from the Map Program!!!)
Open IMFD.
Select the Base Approach Program. Since we are approaching a planet and we want to
land at a particular base, Base Approach is the program of choice.
Hit the TGT button, and set the Target to Olympus. This will automatically input
Olympuss Longitude and Latitude.
Set Alt to 120k. Marss atmosphere ends at 100k, but we want to give ourselves some
room for error.
Set up the Num item. This is the number of full orbits between orbit insert and landing.
See the description of this item in the Base Approach Program section.
Hit Autoburn.
Congratulations! You are now approaching Mars, headed for a landing at Olympus!
Now, you must time warp slowly and keep an eye on dV. It will start to increase. Every
once in a while, hit Autoburn again (maybe every time it gets above 100). Careful as it
increases at a dramatic rate as you get close to the planet.

Map Program SetupPlaybacks 3,4,5,6,7

Example: Set up the Map Program en route to Mars.
Open IMFD.
Select the Map Program.
Set Reference as Sun.
Set Target as Mars.
Set Center as what you want centered (your ship, periapsis at mars, etc.)
Hit SOI. This will display the SOI around all bodies with a mass greater than the mass
limit in the configuration page.
Hit Dsp. This will display all orbits. If you do not want to see all orbits, then do not hit this
button.
Hit the INT button. This will turn on intercept mode.
The map is now set up to go to Mars. Note that none of these steps are absolutely
necessary, but its nice to have a good display as your ship travels through the Solar
System.

87

Slingshot SetupPlaybacks 6,7

Slingshot setups are very tricky and are different for every scenario. The two slingshot playbacks
should cover most situations you will encounter.

Circularize Orbit
Example: Circularize your orbit around Earth. This assumes you are in a closed (Eccentricity
less than 1) orbit and you are currently at the altitude that you want your orbit to be at.
Open IMFD.
Select the Orbital Program.
Hit the CIR button to open the Orbit Circularization Mode.
Hit the Autoburn button.
You are now in a circular orbit.

Match VelocityPlayback 2
Example: You are approaching Phobos at about 50 m/s, and you want to match its velocity
so you stay in the same position relative to the Martian Moon.
Open IMFD.
Select the Orbital Program.
Hit the VeM button to open the Velocity Match Mode.
Hit the TGT button and type in Phobos.
Hit the Autoburn button.
You now have the same relative velocity as Phobos.

Direct Ascent to the MoonPlayback 1

Example: Start at Cape Canaveral, and set up and execute one long burn for a direct ascent
to the moon.
Open IMFD.
Select the Course Program.
Select the Target Intercept Program. Since we are going from a planet to a moon, Target
Intercept is the program of choice.
Set Target as Moon. Once you do this, the purple orbit will begin to swivel, shrinking
and growing continually.
Set TEj to 0. This will stop it from shrinking and growing. Also, since this is a direct
ascent, time between takeoff and ejection burn is zero because it is one long combined
burn.
Check that the Reference is Earth (because this is the object that the target and source
are orbiting around) and check that the Source is your spacecraft (in a Planet to Moon
Transfer, the source must be yourself).
Set the TIn to your desired time until intercept. A good value for this would be about
400,000 seconds.
Open Burn Vector View. Once the ship is in a stable state, time warp at about 10,000x
until the cross goes SIGNIFICANTLY ABOVE the horizontal green line (more than one
third of the way from the horizontal green line to the top of the circle). We have now
found our launch window. We will be flying with our nose pointed towards this cross, and
if the cross is below the horizontal green line (which is the horizon line), we will be
burning our engines for several minutes towards Earth. Not a good idea.
Take off, and fly towards the cross. Keep the cross grey (not green) and in the center of
the crosshairs.
When your Total dV remaining reaches around 5,000, cut off your main engines and hit
the Autoburn Button. Let Autoburn take care of the rest of the burn.
Congratulations! You are on your way to the Moon!

88

Appendix F
The dos and dont evers of IMFD.
DO

Realize that IMFD will not always work as expected 100% of the time.
Unfortunately, this is the truth of incredibly complex pieces of software offered for free.
However, Jarmonik knows what he is doing and IMFD is reliable 99.9% of the time. If it
does not work, look back to this manual and see if you find something that explains the
problem. If you cannot, Jarmonik, myself (markl316), Tommy, and countless others can
help you on the forum.
When you first open a program and a delta velocity to match a target orbit is
displayed, ALWAYS time warp until it hits a minimum, THEN hit autoburn.
There are several reasons for this. First, it is the most fuel-efficient way to do a burn.
Second, most programs do not take gravity into account. This means that as you
approach a planet from far away, the orbit begins to change drastically. So if you correct
the burn too far away, the orbit will change drastically, requiring lots of fuel to correct.
In the above case, if you start to time warp and dV increases, IMMEDIATELY
execute autoburn.
dV will not increase and then decrease, so in this case perform the burn as soon as
possible.
Learn how to cope with huge ships. With large slow rotating ships (such as
Deepstar or Vespucci), either turn down Autoburn Max Rate, or manually rotate the
ship to the correct attitude using the Burn Vector View and THEN execute
autoburn.
If your ship keeps rotating and never getting to the correct burn attitude (attitude thrusters
keep firing and the ship keeps spinning like crazy) when you hit [AB] (ie the RCS
thrusters provide a low angular accelerationgood examples are Vespucci and
Deepstar) you might want to turn Autoburn Max Rate down. Or, you could open burn
vector view, manually rotate towards the cross, then hit Autoburn.
Plan Ahead.
Open programs such as Base Approach and Slingshot WAY ahead of time. Then time
warping slowly, keep an eye on dV. Slow and steady wins the race.
Watch the display screen of autoburn during the ENTIRE time autoburn is
controlling your ship.
Sometimes, Autoburn will act crazy. This is just a fact of life, with a complex free piece of
software. If in the middle of the burn Autoburn starts to spin your ship like crazy, hit the
[AB] button to shut it off. Try time warping at 10x for about 6 seconds (one minute sim
time) and try it again. If it still doesnt work, switch to Burn Vector view and make the
burn manually.
Use Realtime mode for burns instead of Off-Axis if Off-Axis is giving you trouble,
even if everybody tells you not to.
Realtime burn mode is slightly less fuel efficient than off-axis, and much more reliable. If
Off-Axis mode is giving you grief, just use realtime and dont worry about it. You can do
any burn in realtime and get to your target and have everything work perfectly.
Slow down time and watch your orbit match the targets orbit when using Off-Axis
mode.
Sometimes, when using Off-Axis mode, the Autoburn will not shut down the engines, and
your orbit (green) will go right past the target orbit. If this happens, just turn off Autoburn,
wait 30 seconds, then engage Autoburn againIN REALTIME BURN MODE. If this fails,
switch to Burn Vector View and do the burn manually.
When doing a long burn, first do it in Off-Axis mode, then let Autoburn finish, then
switch to realtime burn mode and engage autoburn again.
This is to allow Autoburn to make your burn perfectly.
Engage Autoburn early.

89

Even if it says Time to burn 120000 seconds, it is better to engage it early then to miss
your ejection point. Plus, if you do this, Autoburn will slow down time as you approach
the point of burn, so you never have to worry about missing the burn point.
Dont EVER
Switch between Realtime and Off-Axis mode during the Autoburn
This may make Autoburn go haywire. If you must switch, first turn Autoburn off (hit the
[AB] button), then make the switch to Realtime, then engage autoburn a second time.
Engage Autoburn at high time warps.
This can cause Autoburn crashed, IMFD crashes, and CTDs. ALWAYS switch to
realtime before engaging Autoburn.
Engage Autoburn for one program, and while the burn for that program is running,
switch to a different program.
If you do this, Autoburn will not shut off the engines. You will burn until you realize what
is going on, run out of fuel, or crash. Leave a program open when its autoburn is
running.
Switch between internal view and external view when Autoburn is running.
Results of this problem are very similar to the problem abovethe engines dont shut
down when you are in external mode.
Engage Autoburn AFTER TtB says 0.
This causes many weird autoburn symptoms, including aiming your ship towards earth
and diving straight for the planet. It is strongly recommended to quicksave very often in
case this happens to you.
Use scenario editor to go back in time.
Instead, quicksave often. Using scenario editor to go back in time will cause many weird
malfunctions. Also, dont EVER use scenario editor to go forward in time with two
exceptionson long flights (Earth to Pluto) when you are in the cruise phase (out of
Earths SOI, ship is in a stable state), or when fast forwarding many years to a launch
window. It is recommended that you adjust first the seconds, then minutes, then hours,
then days, then months, then years. This gradual onset of time change can help IMFD
not crash or malfunction.

90

Appendix G
This Appendix contains all in-flight notes for all playbacks. If you missed an in-flight note, or you
just want a hard copy, here they are. It is highly recommended that you take all flights in order as
some lessons use material introduced in past lessons.
IMFD Tutorial #1Direct Ascent to the Moon
IMPORTANT: Since I used High Resolution KSC for this playback, depending on whether you
have it installed or not, this flight might not start you on the runway. Dont worry, you will still get
to the Moon.
0
Welcome to IMFD Tutorial #1--Direct ascent from Earth to the Moon!!!
7
This tutorial will take you to the Moon from the Earth with a direct ascent from the Earth.
17
Open up IMFD in the Left Hand MFD.
32
Hit the [MNU] button, then the Course button.
44
Target Intercept should be highlighted and underlined in white. Hit the Set button to
select it. Since this is a Planet to Moon transfer, Target Intercept is the program of
choice.
60
Hit the [TGT] button, and input Moon. This is the target because it is where we are going.
Reference and Source will be automatically set up when you input the target.
85
Hit the [NXT] button to highlight TEj, then hit the Set button. Set the value to zero. This
will stop the orbit from shrinking and growing.
105
Hit the [PG] button, and then the [BV] button to open the Burn Vector View. Basically we
will fly towards the cross and apply about 10k m/s of delta velocity. In order to do that,
we must wait for the green cross to be above the horizontal green line (horizon line) or
we will be flying into the Earth. We will begin to time warp until that happens.
47202 Ok, the cross is well above the horizontal line. We will now take off and fly towards the
green cross.
47212 Engaging main engines.
47234 Gear up.
47282 Now that the cross is centered (note that it has turned grey--this means it is centered) we
will use the kill rotation autopilot to keep our attitude steady. Note that this will take a
while to do a 10k m/s change in delta velocity. We will stay in normal time for the first
half of the ascent. If you want to walk away from your computer, come back at sim time
= 47700.
47330 Don't worry, we will stay in real time. So be back at your computer in 370 seconds (6:10)
if you want to get a snack or something. You won't be missing anything, I'm just keeping
the cross centered by rotating towards it.
47700 Ok hopefully you are back. We are now going to transfer the burn to Autoburn. This will
allow us to just sit back and relax instead of manually keeping the cross centered.
47728 There's Main Engine Cutoff. We had to do that because in order to engage the autoburn,
the engines cannot be running.
47732 There's Main Engine Cutoff. We had to do that because in order to engage the autoburn,
the engines cannot be running. Engaging Autoburn.
47736 Now that Autoburn is controlling the burn, we can use Time Acceleration.
48261 Now we are back in normal time, with Main Engine Cutoff coming up in about 20
seconds.
48296 Now we will time warp until we are about halfway to the moon for our first midcourse
correction.
178620 Now we are about halfway to the moon. It's time to set up our base approach using the
Base Approach Program so we can land at Brighton Beach.
178635 Open IMFD on the right if it isn't already open, and hit [MNU].
178650 Select the Base Approach program. Make sure the Reference is Moon. If not, hit [REF]
and type Moon. This program will help us set up a hyperbolic orbit that will allow us to
land shortly after orbit insert.
178665 Scroll down using [NXT] and [PRV] until the Re-Entry item is highlighted and underlined
in white, then hit the [+] button twice until Orbit-Insert is displayed.

91

178680 Now hit the [TGT] button and input Brighton Beach.
178695 Scroll using [NXT] and [PRV] until altitude is selected, then hit the SET button and input
12k. This is the altitude of our low orbit before deorbit burn and landing. Also make sure
that Num is 0, which tells us that we will land at the passage over Brighton Beach right
after our insertion burn.
178710 Now we will time warp until dV on the Base Approach Program hits a minimum and starts
to increase, then we will perform our Autoburn to zero dV.
327377 Now that dV has hit a minimum and started increasing, we will perform our Autoburn to
match our orbit with the planned approach orbit.
327410 Hmmm, don't really know what happened there. Sometimes Autoburn will fail. If you
see dV increasing when Autoburn is burning, just hit the Autoburn button again to cancel
it, then wait a while and hit it again to make it try again. You can always use Burn Vector
View if it fails, but normally it doesn't.
327433 That's better. Autoburn worked this time, and now dV is pretty close to zero.
327439 Now, we are time warping to Lunar Periapsis.
374655 It is normal for dV to increase even after we have completed the first autoburn. You
must perform a few Autoburns, starting with one very far away from the planet, and more
as you get closer. Doing one far away from the planet makes the burns you do closer to
the planet much less fuel costly. It is normal to perform 3 or 4 burns after your initial
Base Approach setup.
374688 dV is zero again, now time warping some more to get closer to our lunar periapsis.
404071 The Course Program has displayed the warning message that it does when you cross
into your target body's Sphere of Influence. Not a big deal, just hit the Source button and
enter Moon. We will also do another Base Approach correction Autoburn. We want this
to be perfect, as it is aligning us up perfectly with Brighton Beach.
404090 Now open IMFD 4.2.1. Very important--This MUST be IMFD 4.2.1!!! We are doing our
insertion burn, and in order for that to work properly, we MUST use IMFD 4.2.1!!!
404105 Hit the [MNU] button, then the Course Button, then scroll down using [NXT] and [PRV]
and select Orbit Insert.
404130 Now I have hit the Autoburn Button--Don't you do this, I am just telling what I have done.
Now we can time warp safely, because with Autoburn engaged IMFD will automatically
slow down time to let Autoburn execute the burn.
419001 Let's do one final Base Approach correction burn, just to get it perfect.
419010 Autoburn has been pressed.
419030 dV is zero once again. Now time warping again.
421362 About 4 seconds until Main Engines being engaged.
421421 Remember, Orbit Insert is not always 100% accurate. It may leave a little dV leftover.
Just switch to Burn Vector View and finish the burn manually.
421435 I am now finishing the burn manually using Burn Vector View.
421453 Now we are in a circular Lunar Orbit.
421465 Open Orbit MFD on the left. IMFD has served us well, but we won't be needing it
anymore.
421480 Open up Com/Nav MFD on the Right, and set Comm1 to 132.50, the VTOL frequency
for Pad 4 at Brighton Beach. This is the pad where we will be landing.
421520 Now open up a Map MFD on the right, and set the target to Brighton Beach.
421539 Now time warping to near the landing time. Watch the cross on the Map MFD.
425861 Now engaging Regrograde Autopilot. We will orient ourselves for the Deorbit burn.
425880 All MFD's are set up for the deorbit burn--the Comm/Nav MFD has the right frequency,
and you should have Map MFD on the right. Switch from Orbit MFD to Surface MFD on
the right.
425905 This has been a great four and a half days with you (or 25 minutes at Play at Record
Speed :) ).
425930 Oh man! Would you look at our fuel! It's pretty low.
425960 The landing will be done in real time. If you already know how to land, you can just exit
out here. But I recommend you watch the landing. Spectacular views of the Lunar
sunset await.

92

425996 Now we will time warp until the deorbit burn.

426301 We are seconds away from the deorbit burn.
426309 Engaging main engines.
426381 Nearing Main Engine Cutoff.
426396 There's Main Engine Cutoff. Now we will turn Prograde, then Level Horizon and slow
down our descent rate.
426433 While we're at it, let's open the Retro Doors. we'll need those to slow ourselves down as
we near Brighton Beach.
426477 Let's open the VOR/VTOL MFD in place of the Map MFD so we can head towards the
pad.
426510 The Velocity Vector (Circle with crosshairs on the HUD) has been placed on the pad.
426604 Let's start reducing speed.
426652 We're getting close to landing.
426706 There's that REALLY annoying radar beep. In place of the Surface MFD, open up the
Radio/MP3 MFD, hit the [RAD] button to stop the beep, and then go right back to the
surface MFD.
426780 Landing gear down.
426813 Now we're centered over Pad 04.
426844 Now Autohover is engaged, and we're hovering about 5 meters above the pad. I will now
make any final corrections in centering us over the pad.
426877 Now we will start to descend again.
426908 Gear Touchdown!!! Now turning off all autopilots and killing hover thrust.
426920 Congratulations!!! If you have Lunar City installed (available at Orbithangar) and
McWoggs's new sun texture installed (also available at Orbithangar), hit F1 to go outside
(Make sure Orulex is disabled for this spectacular view). The sun is setting directly
behind Lunar City, making it appear to have rays growing out of it. Beautiful.
426935 The pad lights have just turned on. This is Markl316 signing off. Enjoy your stay on the
Moon.

IMFD Tutorial #2Mars to Phobos

0
Welcome to IMFD Tutorial #2--Mars to Phobos!!!
7
This tutorial includes a flight from Mars to Phobos, with a landing on PreludeII Phobos.
16
The method used here is the EXACT same method used to get from the Earth to the
Moon.
32
So, using this method, substitute "Moon" for "Phobos" and "Earth" for "Mars" and you will
get to the moon no problem.
45
Welcome to Olympus Base. We're in a deltaglider.
52
Open IMFD, and select Surface Launch. we'll plan our course once we're in orbit.
65
With Course highlighted, hit the [+] button until lunar off-plane comes up.
78
Set the target to Phobos.
86
Notice EIn. This is Ejection Inclination, and we'll take off when it's zero. Time warping
until that point.
15834 EIn is less than 1 degree. When we take off, we'll turn towards a heading of 90 degrees,
because the Hed item in the Surface Launch Program is 90.00.
16316 Takeoff!!! We'll turn to 90 degrees, then ascend. The ascent is not too long, so we'll be
doing it in realtime. Don't leave your computer, important instructions follow.
16464 Now that we have picked up some speed, we can introduce side slip (yaw the nose left
or right) to minimize EIn (as our goal for this number is zero).
16642 There's Main Engine Cutoff. Not the best orbit, but it's a quick fix once we reach
apoapsis.
17394 That's good enough, it doesn't have to be perfect, as we'll be leaving soon.
17400 Ok, time to plan our course to Phobos. Hit the [MNU] button, then select Course, and
Target Intercept.
17413 Set the target to Phobos, then scroll to TIn, hit Set, and input 7200.

93

17423 Scroll until TOF-Unlocked is selected, then hit [+] to make it locked. This is so when we
adjust TEj, the difference between TIn and TEj (time of flight) stays the same.
17445 Now we must adjust TEj until dV reaches a minimum. Since I have already flown this
flight, I know that the approximate value is 4570, so highlight TEj, hit Set and then input
4570.
17470 Now, with Adj at 1x on the bottom (hit Adj until it is), use [+] and [-] to adjust TEj to make
dV a minimum.
17490 Note how EIn is a bit off, so we'll turn Orbit Anti-Normal to make the plane change burn.
Remember, we don't have to be at a node--EIn can be adjusted anywhere, but it's most
efficient at a node.
17596 EIn is zero. Now, we'll turn off the Anti-Normal autopilot, then I'll hit the [AB] button.
22041 5 seconds until burn.
22046 Engaging main engines.
22115 Autoburn complete. Notice how quickly dV is changing. Because Phobos moves so fast
(it's very close to Mars so it has a low orbital period) any tiny deviation in dV is
"amplified."
22140 Don't worry, with an Earth to Moon flight, dV won't change nearly as quickly at all--it will
hardly change at all. This is just for flying to a target that moves fast (low orbital period).
22153 Time warping until we're halfway to Phobos.
24783 Let's do a midcourse correction burn. Engaging Autoburn.
24804 The burn is complete, and dV is very close to zero. Let's time warp until we're closer to
Phobos.
28002 We're closer, and dV has deviated, so let's do another course correction. Engaging
Autoburn.
28030 Good, dV is minimal again, let's time warp until we're even closer.
28590 Let's do one more mid course correction. Since we're doing this correction with the
course program, it is trying to crash us into the dead center of phobos.
28600 When flying to the moon, this would be BAD, but since we're not entering orbit around
phobos, it's no problem.
28612 Autoburn is done. Open the Orbital Program now.
28620 Select the Velocity Match Program ([VeM] on the right).
28625 Set the target as Phobos.
28635 dV is 782 and distance to phobos is 467.7k. Let's wait until we're closer to initiate
Autoburn.
29116 Ok, engaging autoburn.
29151 Ok, I cut Autoburn off early. I don't want to cancel too much velocity too quickly, or
it would take forever to get to Phobos.
29212 Ok, bring up Surface MFD in the MFD that doesn't have IMFD. Let's cancel some more
velocity. Engaging Autoburn.
29235 dV is good for now.
29242 Approaching Phobos. Go to external mode (F1). What a view!!!
29310 Now we'll do our final autoburn to completely match our velocity to Phobos's velocity.
29330 Our velocity relative to Phobos is now zero.
29348 Now rotating towards Phobos. Let's see if we can see PreludeII Phobos from out here.
29367 Base sighted! Now we'll fly towards it.
29390 Retro doors are open.
29790 Landing on Phobos. Sit back and relax.
29839 Open the Comm/Nav MFD in place of IMFD (we won't be needing it anymore), and set
Nav1 to 134.1 (the VTOL frequency of Phobos). Then open VOR/VTOL MFD.
29925 Gear down.
30041 Touchdown!!! Important: landing on moons with low G fields (tiny moons close to planets-Phobos, Amalthea, Pan, etc.) can be tricky. You have to hit kind of hard (-.2
m/s) to land.
We bounced the first time because we didn't land hard enough.
30060 Enjoy the view of Mars over the rail at the edge of the pad.
30075 Enjoy your stay at PreludeII Phobos. This is Markl316, signing off.

94

IMFD Tutorial #3Europa to Callisto

0
Welcome to IMFD Tutorial #3--Off-Planar Flight from Europa to Callisto!!!
10
Open IMFD in the left MFD display.
20
Hit [MNU], then the course button, then [SEL] to select Target Intercept.
30
Hit [TGT], then type callisto. Since this is where we are flying to, Callisto is our target.
40
Scroll down to the TOF-Unlocked item, then hit [+] to change it to TOF-Locked. We will
be time warping quite a bit to a launch window, and we want time to ejection AND time to
intercept to go up at the same rate.
55
Hit [Adj] until the Adjustment factor in the bottom of the screen says 100x.
62
Highlight the GET item under TEj, and adjust it with [+] until dV hits a minimum. Then,
hit [Adj] until it says 10x, and repeat process, and do the same with 1x until you hit an
absolute minimum.
90
Values for this particular flight are approximately TEj=367.4k and TIn=765.7k.
100
Unlock TOF the same way you locked it. Also note how above it there is an item that
says Off-Plane. This is good, as we are doing an off plane intercept.
114
Now time warping until TEj says 6400k (this is an estimate of the time from takeoff to
ejection burn).
361097 Open IMFD in the left MFD display, hit [PG] and enter 0 (sharing with IMFD with ID zero-the left MFD display) and bring up surface launch.
361120 The Surface Launch program says we should fly a heading of 88.467 degrees. Let's
take off and turn to that heading.
361135 If you missed it, before we took off, Surface Launch said our optimum takeoff was in
about 93000 seconds.
361145 That was the OPTIMUM launch time. We took off not at that time because we have a
shorter time of flight, so it would eat in to a greater percentage of the flight (93000 divided
by time of flight which is ~470k seconds).
361185 For an Earth to Mars flight, the time of flight is very long (about 21,000,000 seconds),
and the earth has a fast rotation (optimum launch time twice every 24 hours) so it's not a
big deal to wait for a good window in that situation.
361205 I'm going so high before engaging our main engines because if you have Orulex running,
we don't want to crash into an ice cliff.
361220 Now we're rotating to keep EIn in the Surface Launch program at zero.
361321 There's Main Engine Cutoff. We don't need to worry about raising our PeA, as this is a
parking orbit.
361335 Open Orbit Eject, and change Higher Orbit to Course. For this tiny plane change
maneuver (0.01 degrees), I'll use sideways linear thrusters (translation numpad 1 and 3).
361360 Now, in Target Intercept, set the TEj in Target Intercept to match TEj in Orbit Eject. This
step is not really necessary, as we can eject when TEj in Target Intercept is 10k or less,
but it helps make IMFD a tiny bit more accurate in the course planning.
361380 We'll time warp until a bit closer to our ejection point.
361942 Notice how EIn has changed since we set our two TEj's to match (those in the Target
Intercept and Orbit Eject). Let's burn to correct that.
361983 Oops, wrong way. IMFD doesn't tell you to turn Orbit Normal or Orbit Anti-Normal, so
you just have to guess. If EIn increases, cut off the engines and turn the other way.
362104 Now I have engaged the Autoburn for Orbit Eject. We'll time warp, then let Autoburn
lower the time warp and do the burn for us.
363193 5 seconds until the burn. We will time warp at 10x through the duration of the burn.
363360 There's main engine cutoff. Let's time warp until we are away from Europa.
407700 Ok, time to set up the Map Program. Open it up ([MNU], Map button).
407710 Hit [TGT] and type in Callisto.
407720 Hit the [Cnt] button, and type p-Callisto. This will center our periapsis at Callisto.
407730 Now hit the [Int] button to turn on intercept mode.
407745 Now that we're out of Europa's sphere of influence (SOI), in Target Intercept, hit the [Src]
button and type x.

95

407760 The dV value looks kinda high, let's see if it goes down with time (we'll time warp slowly
and watch it).
407895 Note how it increased. Thus, we should Autoburn now, as it will not increase and then
decrease.
407931 Now time warping until we are about halfway there, for our second midcourse correction.
563122 It's time for our second midcourse correction. I'll simply hit the [AB] button (autoburn) in
the Target Intercept Program.
563156 dV is zero, now we're time warping until we get a bit nearer to Callisto.
578556 Ok, let's set up our base approach. Open the Base Approach Program in the right MFD
in place of the Map Program.
578570 Set the reference (using the [REF] button) to Callisto, as this is the body we're
approaching.
578580 Hit the [TGT] button and enter "PreludeII Callisto" without the quotations. If this doesn't
work, in the previous release of the Prelude Packs, there was a typo in the base name,
so try "PreludeII Callsito" without quotations. Note the spelling of Callisto in the latter
example.
578590 Scroll down to the Re-Entry item and hit [+] until it says Orbit-Insert.
578599 Time warping until dV hits a minimum.
716577 dV has hit a minimum, we'll hit the Autoburn button in the Base Approach Program now.
716606 Now time warping until we're closer to Callisto.
749352 Let's do another Autoburn in the Base Approach Program to get dV back down to zero.
749384 Time warping until our third and final Base Approach Correction.
759078 The warning message has just been displayed in the Target Intercept Program, saying
we are under the influence of Callisto. Open IMFD 4.2.1 in place of Target Intercept, and
go to Orbit Insert ([MNU], course button, orbit insert).
759108 Now Autoburning--this will be our final base approach correction.
759125 dV is zero. Now, hit the [AB] button in the right MFD (the one with Orbit Insert), and we'll
time warp until the autoburn slows down time and executes the burn.
763657 We'll finish the burn manually in Burn Vector View. Hit [PG] then [BV] to open this view.
763693 Welcome to Callisto Orbit!
763700 Open Map MFD in the left MFD screen and open Comm/Nav MFD in the right MFD
screen.
763715 In Map MFD, target PreludeII Callisto and in the Comm/Nav MFD, set Nav1 to 131.60.
763730 Now we'll time warp until we get closet to landing.
769690 Now preparing to land.
770525 Now executing the deorbit burn.
770609 There's Main Engine Cutoff, we'll turn Prograde, then Level Horizon and descend
towards the base.
770670 What a view of Jupiter! Go into the virtual cockpit for a really neat perspective.
770700 We're falling towards the surface, and I'm using numpad 1 and 3 in translation mode to
get the Velocity Vector right under the nose, which is pointed directly at the base. Also, I
just opened the retro covers.
770730 Retro Engines engaged. We're gonna overshoot the base, but we'll come back.
771000 Now open VOR/VTOL MFD in place of Map MFD, as we are picking up a VTOL signal.
771025 I'm now landing the ship.
771466 I'm centering the ship over the pad now.
771480 Gear down.
771560 We're centered over the pad, now landing.
771592 Touchdown! Welcome to PreludeII Callisto.
771601 This is Markl316, signing off. Enjoy your stay on Callisto.

IMFD Tutorial#4Moon to Earth

IMPORTANT: The following settings may be required in the XR2 configuration file in order for
this playback to function properly:
RequirePayloadBayFuelTanks=0

96

EnableAFCtrlPerformanceModifier=0
Main Fuel ISP=5
LOXLoadout=1
LOXConsumptionRate=-1
Main Engine Thrust=1
Hover Engine Thrust=1
APUFuelBurnRate=2
0
10
30
33
36
39
42

Press the <RAD> button in the left MFD to stop the annoying beeps.
Open OrbitMFD on the right, and set your projection and dist.
On the left, open IMFD.
In IMFD, press <MNU>, then select the Course program
Select Planet Approach
Press <PG> then set the source (SRC button) to "moon"
Press <PG>, then set the EqI to 30. Cape Canaveral is at just under 29 degrees north
latitude.
45
Set the PeA to 500k. The course program is a bit inaccurate, so we'll set the PeA high.
48
Set the TEj to 6400. That's about how long it will take to reach our ejection point.
51
Set the GET under PeT to 143:30:00. See the manual in you docs folder to see how I got
this number.
54
Press <MNU> and select Surface Launch.
57
The Hed shows our launch heading. During ascent we want to get the EIn down to zero.
198
Takeoff, turn to heading of 58.06 degrees. Ascend to an ApA of 150k.
340
Open IMFD on the right and press <MNU>
360
Press <PG> and enter 0 to set the opmode to shared
380
Select Orbit Eject program. Change "Higher Orbit" to "Course". Change "Realtime" to "Off
Axis"
410
Since our ejection time is after our Apo, change back to OrbitMFD and wait to circularize
the orbit
2945 NOTE Reopen IMFD on the right. Since we've changed our orbit we need to adjust our
TEj. Adjust it to get the lowest Enroute dV.
6895 Using IMFD's AB to execute ejection burn.
6960 After the ejection burn is fully completed, change to IMFD's Map Program and set the
reference to "earth". Press <mod> untill you see the configuration settings, and change
the accuracy to 1.
27320 Open OrbitMFD on the left and change the reference to Earth. Then we wait until we
enter Earth's SOI. The G number at the bottom will chang from red to yellow when it
reaches .50.
378845 On the left, open IMFD and select Base Approach.
378875 Target "cape canaveral".
378905 Set the Ant to 90. The XR-2 has a much longer glidepath than an Apollo capsule. Leave
the Alt and ReA as they are.
378935 Increment the HInt until it matches the PeT shown on IMFD's Map. You may have to
change pages or modes on Map show PeT (not ReT).
379000 Using AB to correct course for Cape Canaveral direct ReEntry.
379020 After the burn is complete, orient prograde. We need to be EXACTLY prograde, so wait
until the roll is complete.
379050 Since our PeA is to high, we'll use left translational RCS to lower it. If it was low, right
translation would raise it
379070 Adjusting PeA to just under 70k.
379090 When I'm happy with my PeA, I'll switch the HUD to Surface Mode and fast forward to
20M alt. I'll also dump any remaining Main fuel (recording doesn't show this)
502406 Now we can open AerobrakeMFD on the right, and target "cape canaveral". Bring up
SurfaceMFD on the left.
506425 Orienting for ReEntry. Roll inverted, eliminate slip, and set AOA to 40 to 45 degrees.

97

506545 At about 115k Alt, I'll close the retro doors and radiator. Set the COG to about .2 to the
rear, and trim up.
506575 I use Killrot to provide roll and pitch dampening until I can get the ship stable.
506660 As my VS approaches zero I'll pitch down to maintain a slow descent rate.
506790 I'll raise my AOA to gain altitude. I want to get to about 70 km by the time I'm down to
7.5k V so I don't risk burning up when I transition to upright.
506950 At about 7.5k V I'll lower the AOA to zero and roll upright. I want about 70ms to 100 ms of
negative verticle speed before I engage the Attitude Hold AP.
507000 Engaging Attitude hold AP at 42.5 degrees AOA
507020 From here it's a standard ReEntry. I'll adjust my AOA and bank according to
AerobrakeMFD's map.
508017 Killing the AP, going to normal flight. I want to cross south of the runway at close to a
right angle.
508075 I've just crossed the runway so I'll start my HAC turn.
508170 I'm a little under the glidepath, but I'm light enough to get away with it.
508396 Voila! Special thanks to Agentgonzo for the many hints.

IMFD Tutorial #5Earth to Mars

IMPORTANT: Since I used High Resolution KSC for this playback, depending on whether you
have it installed or not, this flight might not start you on the runway. Dont worry, you will still get
to Mars.
IMPORTANT: The following settings may be required in the XR2 configuration file in order for
this playback to function properly:
RequirePayloadBayFuelTanks=0
EnableAFCtrlPerformanceModifier=0
Main Fuel ISP=7
Scram Fuel ISP=2
LOXLoadout=9
LOXConsumptionRate=-1
Main Engine Thrust=1
Hover Engine Thrust=1
APUFuelBurnRate=1
0
10
20
35
55
70

85
90
105
130
145
160
180

Welcome to IMFD Tutorial #5--Planar Transfer from Earth to Mars!!!

Open IMFD in the Left and Right MFD's.
Hit [MNU] on both MFD displays, then hit [PG] on the right MFD. Input "0" without
quotations, so that the right MFD gets its data from the Left MFD.
In the Left MFD, hit the Configuration option, then using [NXT] and [+] change GET to
MJD.
Now open Target Intercept. Hit [MNU], then Course, then Target Intercept, then hit
[TGT] and input Mars. This is our primary navigation tool in a planet to planet transfer.
Lock Time of Flight by highlighting the TOF-Unlocked item, and hitting [+] once. When
we adjust our ejection time, time to intercept will now adjust in conjunction with time to
ejection, leaving our time of flight the same.
Hit [Adj] to
Highlight the MJD item under the TEj item.
Adjust it by holding down the [+] button. Every click will shift Time to Eject (TEj) and
Time to Intercept (TIn) up one day. Both will be adjusted as Time of Flight is locked.
When it hits a minimum, hit [Adj] until it says 1x, and adjust it again for a more fine
adjustment.
It looks like in this flight, oV hit a minimum around 4.497k m/s of dV (4,497 m/s). Now
unlock Time of Flight.
Highlight Off-Plane, and hit [+] until it says Source Plane. This is a highly effective way
of getting to Mars.
Lock TOF again, and adjust TEj the same way you did earlier, until oV hits a minimum.

98

220

Unlock TOF again. Approximate values for this flight are: oV=3480, TEj=354.1k,
TIn=22.43M, MJD of TEj=60586.640, MJD of TIn=60842.261, and Tn=7.643M.
250
Time warping until ejection point. Note that you will rarely get a launch window 5 days
after you started the scenario, but since I had flown the flight multiple times, I started the
playback 5 days away from launch time.
344338 TEj is 10,000 seconds (10.00k), so let's open Surface Launch on the Right MFD. Again,
you may want to do this earlier (at least 50k before ejection, but since I've flown this
flight multiple times, I know when to take off).
344355 Time warping until the Time item in Surface Launch says zero, then we'll take off.
348153 APU is on, External cooling is off, and AF control surfaces are active.
348159 Takeoff!
348180 Gear up. We cut the engines because we had a high takeoff speed, which was near the
gear failure speed, so we don't want to pick up speed too quickly until the gear is up.
348190 Turning to 90 degrees as instructed by the Surface Launch program before we took off.
348223 Open up Surface MFD on the left. Don't worry, the course plan we just set up won't get
deleted.
348229 Mach 1.
348257 We've banked a bit to try to get the EIn to zero during the launch.
348325 Scram Doors opening.
348360 Scram Engines Engaged. We'll bring the main throttle down slowly, making sure the
scram engines continue to produce sufficient thrust.
348436 We've banked again to try to reduce EIn during ascent.
348618 We've banked again to keep EIn at zero.
348720 The SCRAM engines are losing their effectiveness. Let's turn them off, get the SCRAM
doors closed, and continue the ascent with our main engines.
348762 In the Surface Launch Program, hit the PRJ button until the projection is on self, and
burn until we have an ApA of 300k.
348822 Main Engine Cutoff. APU is now off.
348835 We'll fix our periapsis later. Let's reopen IMFD on the left MFD display.
348842 On the Right IMFD display, hit [MNU], the Orbit Eject. We will use Orbit Eject to eject
from Earth enroute to Mars.
348855 We will eject on this orbit because TEj in Target Intercept will be at around 3000 when
TEj in Orbit Eject is zero, and that's close enough for an Earth to Mars flight. Time
warping until we hit the node in Orbit Eject.
349163 Turning Orbit Normal +.
349352 Time warping until we're at apoapsis so we can fix our orbit.
350440 Turning prograde.
350521 Our orbit is now almost a perfect circle. I use the Secondary HUD, mode 2 for ApA and
PeA values to avoid messing around with the MFD's.
350530 I just hit Autoburn, and now we're time warping until we eject from Earth Orbit.
351158 5 seconds until the burn. We'll do the burn in 10x time warp since it is long.
351420 Main Engine Cutoff. Ok, coolant is hot, let's get the radiator out.
351560 Ok, coolant is back to normal. We'll now time warp until we're out of Earth's SOI.
414985 Ok, we're out of Earth's SOI. Set SRC in Target Intercept to "x" without quotations (x is
for your ship) and open the Map Program on the Right.
414995 Set Reference to Sun, Target to Mars, and Center to p-Mars.
415025 Hit [INT] to turn on Intercept mode, and [DSP] and [SOI].
415040 Time warping to plane change maneuver.
7333825 We're about 312,000 seconds until plane change maneuver. So, use [NXT] and [PRV]
to highlight the Prep. PlC item. Then hit the [+] button ONCE, then hit [PG], and [AB].
We are now set up for our plane change burn.
7333860 Time warping.
7646730 5 seconds until the burn.
7646784 Ok, dV is zero, time to time warp until we get closer to Mars.
16444578 Ok, let's do a midcourse correction burn. I will hit [AB].
16444590 Good, dV is zero, let's time warp until we get even closer.

99

19475478 Time for another mid course correction burn. I'll hit [AB] once again.
19475503 Time warping.
21893567 Ok, we're a little over 500,000 seconds away from our periapsis at Mars. Open Base
Approach in place of the Map program on the right MFD.
21893575 Set the Reference to Mars.
21893590 Change Re-Entry to Orbit-Insert.
21893605 Time warping to see if dV will increase or decrease.
21895536 dV increased, so let's immediately do the base alignment.
21895545 Set the Target to Olympus in the Right Hand MFD screen.
21895555 Set the Num item to 1. We will be able to do a full orbit before landing, which will be
great for some sightseeing after our long journey.
21895565 Autoburning.
21895585 dV is very close to zero, so let's autoburn until we get a bit closer.
22300555 Ok, time for a correction burn. Autoburning. We are using the Base Approach
Autoburn, NOT the Target Intercept Autoburn.
22300575 Time warping.
22427332 Ok, we're in Mars's Sphere of Influence. In the left MFD, open IMFD 4.2.1, and hit
[MNU], then Course, then Orbit insert. This is to prepare for the insertion burn.
22427353 Time warping until very close to Mars.
22429784 Autoburning from the Base Approach Autoburn for one final correction.
22429813 Ok, I've hit the Autoburn button for the Left MFD (Orbit Insert), and we'll time warp
until that point.
22431544 Autoburn didn't quite complete our insertion burn, so I'll use the Burn Vector View to
complete the burn.
22431612 Welcome to Martian Orbit!! Open Orbit MFD on the right and hit [AR] and [PRJ] to set
the reference to Mars and projection to self. Also, open up Comm/Nav MFD on the
right.
22431630 Set Nav1 to 132.20 hZ.
22431640 Now, open up Map MFD on the right, and target Olympus.
22431650 As Base Approach said, we have one full orbit until deorbit burn. Time warping.
22440515 Landing Preparation time. Turning retrograde, and closing the radiator.
22441033 De-orbit burn.
22441244 Ok, Main Engine Cutoff. Turning prograde. Let's turn on the APU and open the
Hover doors. Now, we'll engage the descent autopilot, and open the Left MFD to
Surface.
22441312 Ok, I've set the descent rate at -150 m/s vertical speed.
22441340 We can set it at -200 m/s as we are still high up off the Martain Surface.
22441360 Opening retro doors.
22441450 I've set the rate back at 150 m/s. You don't want to hit the thick (lower) part of the
Martian Atmosphere TOO fast.
22441482 This is just like a typical moon landing, but there's a bit of air to deal with. Not a big
deal.
22441508 The vertical speed rate is now at -100 m/s.
22441544 We are now receiving a VTOL signal, so open up VOR/VTOL MFD in place of Map
MFD.
22441747 Vertical Speed rate is now at -50 m/s.
22441777 Landing.
22441831 Gear down.
22441962 Touchdown!!! Welcome to Mars!!!
22441970 As the smoke cloud clears, check out the amazing view of Mars. A Deltaglider is on
Pad 3.
22441988 APU off.
22441992 Enjoy your stay on Mars. This is Markl316, signing off.

IMFD Tutorial #6Moon to Mars

100

0
10
20
30

Welcome to IMFD Tutorial #6--Moon to Mars!!!

This flight is very complex, and it may take you a few tries to get it right on your own.
Open IMFD in the left and right.
Hit [MNU] on both IMFD displays, on the right, hit the shared button and input 0, and
change the configuration from GET to MJD on the left MFD via the configuration page.
53
In the left MFD, open Target Intercept.
60
Set Reference to Sun and Target to Mars in that order. Then, check that Source is
Earth.
72
Lock TOF by highlighting TOF-Unlocked and hitting [+] once.
83
Highlight MJD under TEj, set Adj to 10x, and adjust with [+] until you hit a minimum.
120
Now, when you hit a minimum, set Adj to 1x and adjust the same way to make a finer
adjustment.
140
Looks like oV hit a minimum of 3.424k on this flight. Now unlock TOF.
155
On the right MFD, open slingshot.
160
Set Reference to Earth, and Source to Moon, in that order.
175
Now it gets kind of tricky. Use [+] to adjust the TEj item in SS (NOT MJD) until
PeA=200k.
190
It will get bigger before getting smaller. First, use 100x, then 10x, then 1x. A bug does
not properly adjust the MJD, so DON'T do it, only adjust the TEj.
230
Ok, now that PeA in Slingshot is 200.0k, in the Target Intercept (left MFD), hit SET, then
input the exact value of TEj in the Slingshot Display.
250
Notice how that just affected the PeA in the Slingshot display. Readjust TEj to get a
PeA of 200.0k just as you did earlier, and keep adjusting. You have until sim time =
320.
320
Once you get comfortable adjusting the values, you might want to input the following
values for this particular flight to make your course match the course being flown:
345
Target Intercept: TEj=1.112M, TEj MJD=52019.634, TIn=25.68M, TIn MJD=52304.026,
oV=2.832k, and in Slingshot TEj=1.112M, and don't worry about MJD (because of a
bug). Your values should already be pretty close to these.
380
A bug in Slingshot makes the MJD number display the current MFD, not the MJD of
ejection. Time warping until TEj gets lower.
1028995 Things have changed a bit, so adjust TEj in the Slingshot display so that PeA once
again is 200k.
1029015 Now, in Target Intercept, hit SET, and input the TEj value from Slingshot, just as you did
earlier.
1029030 On the right IMFD display, open Surface Launch.
1029040 Change the Course item until it says Slingshot by hitting the [+] button. Time warping
until TEj = 3500.
1108929 Ok, time for takeoff. We'll fly a heading of 90 degrees as dictated by Surface Launch.
We will turn during ascent to reduce EIn.
1108971 Now, we're rotating to try to get EIn zero so we don't have to do a plane change.
1109042 In Surface Launch, hit PRJ to change the projection to self, so we can see our orbit
better.
1109080 We'll get into a high lunar orbit. Sometimes, the engines burn us a little towards the
moon (-10 degrees maybe) in a slingshot, and we want to leave room for error. This is
not very likely though, so this step is not necessary, just a precaution.
1109112 Main Engine Cutoff. Welcome to Lunar Orbit.
1109120 Open Orbit Eject in place of Slingshot (on the right), and set the projection to self.
1109130 Change Higher-Orbit to Slingshot.
1109144 Time warping until apoapsis so we can fix our orbit..
1113747 Fixing orbit.
1113824 Engaging Autoburn in Orbit Eject, NOT Target Intercept. We want to eject from Lunar
orbit, while Target Intercept's autoburn will be used for midcourse corrections.
1117846 Ok, our ejection burn is complete.
1117855 Ok, open up the Map program in place of Target Intercept (left), and open Slingshot in
place of Orbit Eject (right).

101

1117865 Set the accuracy to Max (1.000) via the configuration page, and set the reference to
Earth.
1117880 In slingshot, set Source to self by inputting x.
1117890 Turning prograde so we can adjust our PeA at Earth. We'll time warp a bit to get
EXACTLY prograde.
1117990 We're using Translational thrusters Numpad 1 and 3 to get PeA to 200k. Don't use 6
and 9, as these will speed us up and affect our time of flight, where 1 and 3 just "push"
us closer and farther from Earth.
1118127 Ok, PeA at Earth is 200.6k. Close enough. Time warping, and keep a sharp eye on dV
in Slingshot.
1164489 dV has started to climb, so we'll engage Autoburn in SS to zero it.
1164506 Ok, autoburn complete, and our new PeA (from the Map Program) is 575k. That's a bit
higher than 200, but it's fine. We won't burn again until periapsis at Earth. Don't worry if
dV increases, it will go back down. Time warping.
1226490 Ok, we're at our Earth Periapsis. Engaging autoburn in Slingshot.
1226526 Autoburn is complete. We're on our way to Mars!
1226535 Hit the SOI button in the Map program, and zoom in. We'll time warp until we're out of
Earth's SOI.
1332027 We're out of Earth's SOI. In the left, open Target Intercept (don't worry, our flight plan
didn't get deleted), and set Source to self (input x), and open the Map Program in the
right.
1332055 Make the following changes to Map: Reference to Sun, Target to Mars, Center p-Mars,
then hit the Int button, then the Dsp button. SOI's should already be displayed (check
for the grey SOI writing on the bottom).
1332090 Time warping, we'll watch dV in Target Intercept to see if it increases or decreases.
1334050 dV is decreasing, so let's time warp until it hits a minimum, then we'll autoburn.
1762121 There's the minimum, so I will engage Autoburn in Target Intercept.
1762153 dV is zero, now time warping.
5711468 dV has gotten kind of high, so it's time for a midcourse correction. Engaging Autoburn.
18436315 dV has gotten kind of high, so it's time for another midcourse correction. Engaging
Autoburn.
25309104 Time to open up Base Approach in the right MFD.
25309115 Set Reference to Mars, and Target to Olympus.
25309130 Change Re-Entry to Orbit Insert.
25309145 Set Num to 1. Often times this will stop the display from "blinking" between one
trajectory and another.
25309155 Autoburning in Base Approach.
25309172 Time warping.
25612284 dV has gotten high, time for a correction burn.
25612309 Good, dV is close to zero, time warping.
25662286 We're now in Mars's Sphere of Influence. Open up IMFD 4.2.1 in the left MFD, and
open Orbit Insert.
25662305 Time warping until closer to Mars.
25678765 Ok, let's do another Base Approach correction burn. Autoburning.
25678779 Ok, good, dV is close to zero, time warping.
25681164 One final Base Approach correction using Autoburn.
25681186 Ok, I've just engaged Autoburn in Orbit Insert on the left. Time warping.
25681801 Autoburn failed! Don't worry, this is kind of common, just hit Autoburn again, and it
should work. If not, just do it manually using Burn Vector View.
25681970 Autoburn shut off early, now using Burn Vector View to finish the burn manually.
25682048 Welcome to Martain Orbit!!
25682055 On the left, open Orbit MFD, and on the right, open COM/NAV MFD.
25682070 Set Nav1 to 132.20 Hz.
25682085 Now open Map MFD in the right, and set Reference to Mars and Target to Olympus.
25682105 Time warping until landing. Base Approach said we have one full orbit before landing.
25687807 Turning retrograde.

102

25687885 I'll fire our engines to determine the acceleration they provide. Then I'll use vf^2 =
vo^2 + 2a(x-xo) to get the distance from Olympus at which to do the deorbit burn.
That equation is one of Newton's equations in case you didn't know.
25688207 Deorbit Burn has begun.
25688403 Main Engine Cutoff. We'll turn Prograde, then Level Horizon, and bring up Surface
MFD in place of Orbit MFD.
25688480 This is just a standard Mars landing.
25689296 Touchdown!!!
25689305 Enjoy your stay on Mars. This is Markl316, signing off.

IMFD Tutorial #7Earth to Jupiter to Saturn

IMPORTANT: Since I used High Resolution KSC for this playback, depending on whether you
have it installed or not, this flight might not start you on the runway. Dont worry, you will still get
to Saturn.
IMPORTANT: The following settings may be required in the XR2 configuration file in order for
this playback to function properly:
RequirePayloadBayFuelTanks=0
EnableAFCtrlPerformanceModifier=0
Main Fuel ISP=7
Scram Fuel ISP=2
LOXLoadout=9
LOXConsumptionRate=-1
Main Engine Thrust=1
Hover Engine Thrust=1
APUFuelBurnRate=1
0
10
20
30
45
55
70
90
97
110
116
125
160
189
577826
578115
578125
578191

578301
578806
578906

Welcome to IMFD Tutorial #7--Earth to Jupiter to Saturn!!!

This is a very complex flight, and may take several tries to get right on your own.
Since IMFD doesn't calculate slingshot windows, we'll use Voyager's launch
window.
First we must set up a planar transfer to Jupiter, then the Slingshot Program will
transfer us to a Saturn target.
Open IMFD in the left and right.
In the left MFD, go to the config page and change GET to MJD.
NOw, in the left MFD, open Target Intercept
Set target to Jupiter.
Lock TOF, and change Off-Plane to Source Plane.
Set Adjust to 10x if it isn't already.
Highlight the MJD item under TEj.
Now adjust it to get the lowest possible dV on the bottom of the display screen.
Use 1x for finer adjustment. You have until sim time = 160.
Ok, unlock TOF. Approximate values for this flight are: TEj=604.7k, MJD of
TEj=42992.608, TIn=82.64M, and MJD of TIn=43942.167.
Time warping until launch time.
5 minutes until takeoff. On the right, hit [MNU], then the shared item and input 0.
Then, open Surface Launch on the right.
T-10 seconds. Engaging APU and Aerosurfaces.
Takeoff!
We'll bank and yaw to keep EIn in the Surface Launch Program zero during the
ascent. If you can already do this and do not need to see the ascent, come back
in 11:40 or at sim time = 578900 (we'll stay in realtime).
Ok, Mach 3, opening SCRAM doors.
Scram doors closing.
Main Engine Cutoff, turning off APU.

103

578915
578925
580686
580732
580799
580860
580874
581729
583000
583480
618595
618605
618615
618625
618635
618645
618655
618665
618675
9179207
9179238
51590300
51590322
63599143
63599175
69357470
69357500
77436314
77436330
77436345
77436355
77437210
77437288
78084427
78084445
78084455
78084465
78084475
78084525
78084535
78097830
78097932
80848659
80848689
84969260
84969270
85143315
85143325
85143335
85143345

Now, open Orbit Eject in the right MFD. Our orbit has a very low periapsis, but
don't worry, we'll fix this later.
Change Higher-Orbit to Course. Time warping to next node to change planes.
We'll now eliminate EIn.
Wrong way. Remember, IMFD does not tell you to turn Normal or Anti-Normal.
Now turning prograde to fix orbit.
Ok, orbit fixed. Now engaging Autoburn on the Orbit Eject MFD.
Time warping until ejection point.
Oops, let's close the radiator.
5 seconds until the burn. We'll do it at 10x time warp since it's a very long burn.
Ok, Autoburn has completed the burn. Time warping until outside Earth's SOI.
Ok, we're out of Earth's SOI, so open the Map Program on the Right.
Set Target to Jupiter.
Set Center to p-Jupiter.
Hit the Intercept item to turn on Intercept Mode.
Now set Center to the Sun.
Hit the [Dsp] and [Soi] buttons to turn on thier respective features.
Now, in the Left MFD (Target Intercept), set Source to self by inputting x.
Highlight the Prep. PlC and hit the [+] button ONCE.
Engaging Autoburn in the left MFD, and time warping until plane change.
5 seconds until the Plane Change burn.
Good, dV is zero, time warping until we get closer to Jupiter.
Engaging Autoburn in Target Intercept to perform a midcourse correction.
Ok, dV is zero again. Time warping until we need another midcourse correction.
Time for another midcourse correction. Also, in the Map Program, set Center to
self by hitting the cnt item and inputting x.
dV is zero. Time warping.
Another midcourse correction.
dV is zero again. Time warping.
We're near Jupiter's SOI. On the left, open Planet Approach, and set the
reference to Jupiter if it is not.
Set Eqi to zero. It will say ~4.665 because it is the minimum EqI we can
approach with, so anything less than that value inputted will result in ~4.665.
Set PeA to 1.8G. We want to give ourselves plenty of room for error.
Time warping to see if dV increases or decreases.
dV increases, so we'll engage autoburn immediately.
dV is zero. Time warping until inside Jupiter's SOI.
Ok, we're inside Jupiter's SOI. Open Target Intercept on the left, and target
Saturn.
On the right, open Slingshot, and set the reference to Jupiter if it is not.
In Target Intercept, set Adj to 100x.
Now highlight the MJD item under TIn.
Make sure TOF is locked, and adjust it to minimize dV in Slingshot. You have
until sim time = ...8084525.
dV in Slingshot should be approximately 1.225k.
Time warping to see if dV in slingshot increases or decreases.
dV is increasing, so we'll engage Autoburn immediately.
Ok, dV is zero. Time warping until our Jupiter periapsis.
We're at our periapsis, so I'm engaging the autoburn.
Ok, our burn is complete. Open up Map on the right. Time warping.
We're out of Jupiter's SOI. Now, in Target Intercept, set the source to self.
Time warping to see if dV increases or decreases.
dV is decresing, so we'll autoburn when it hits a minimum.
Wait, there's a small problem.
Look at our remaining LOX, and it's about 844 days.
Time to intercept is about 1000 days.

104

85143355
85143365
85143384
90066466
90066603
95831990
95832018
113936199
113936222
137436958
137436975
142348531
144690155
144690165
144690175
144690185
144690200
144703181
144703219
148924737
148924762
149694960
149694975
149864377
149864873
149864896
149864900
149864910

We'd better change that, or we'll die before reaching Saturn.

Unlock TOF, and set TIn to 64.8M, which will give us about 100 days in Saturn
orbit to land at a moon.
Engaging Autoburn. It will do the burn in about a minute real time (sometimes
Autoburn acts goofy like this).
Engines engaged.
Engine cutoff. Now set the map target to Saturn. Time warping.
Time for a midcourse correction burn. Engaging Autoburn.
Time warping at 100,000x until the next midcourse correction burn, which will
occur at TIn=36.00M.
Autoburning for a midcourse correction.
Time warping at 100,000x until the next midcourse correction, which will occur at
TIn=12.50M.
Autoburning for another midcourse correction.
Time warping until we get closer to Saturn.
There's our Oxygen Low warning. Hit CTRL-W to silence it. Time warping.
Ok, we're nearing Saturn. Open up Planet Approach in the Left MFD.
Set the reference to Saturn.
Set the EqI to zero. It will set itself to the Min EqI.
Now set PeA to 1G.
Time warping to see if dV will increase or decrease.
It increased. Engaging Autoburn.
Time warping.
Let's perform a correction burn in Planet Approach. Autoburning.
Time warping.
Now open up IMFD v4.2.1 in the left MFD, and open Orbit Insert.
Engaging autoburn in Orbit Insert (it will wait until we're at periapsis) and time
warping.
We'll do the burn in 10x time warp since it's long.
Finishing the burn using Burn Vector View.
Welcome to Saturn Orbit!!!!!
Now you can set up a flight to Titan by yourself. This playback has gone long
enough.
Congragulations on completing IMFD flight school. You are now hopefully very
well versed in IMFD. This is Markl316, signing off.

105