RBR-MTRD

Andhra Pradesh Standard Data

I. Roads and Bridges

Chapter - 15
MAINTENANCE OF ROADS

Index-code

RBR-MTRD-1

S. No

Description

Unit

Quantity

Rate
Rs.

Amount
Rs.

Remarks

Restoration of Rain Cuts

Restoration of rain cuts with soil, moorum gravel or a mixture
of these, clearing the loose soil, benching for 300mm width
laying fresh material in layers not exceeding 250 mm and
compaction with plate compactor or power rammer to restore
the original alignment, level and slopes as per drawings and
technical specifications Clause 1902 MORD / 3002 MORTH
A Manual Means

Unit = cum
Taking output = 10 cum
(a) Labour
day
Mate
day
Mazdoor (Unskilled)
(b) Machinery
hour
Plate compactor
(c) Materials
cum
Compensation for earth Taken from private land
d&e) Overheads & Contractors Profit
Cost for 10 cum = a+b+c+d
Rate per cum = a+b+c+d/10
B Mechanical Means including conveyance of earth from
1000 M load
Unit = cum
Taking output = 50 cum
(a) Labour
day
Mate
day
Mazdoor (Unskilled)
(b) Machinery
hour
Hydraulic Excavator 0.9 cum bucket capacity @ 60 cum/h

RBR-MTRD-2

OR
hour
Hydraulic Excavator 1 cum bucket capacity @ 60 cum/h
hour
Tipper 5.5 cum, 10 t capacity
hour
Plate compactor 3.5 cum / hour capacity
(c) Materials
cum
Compensation for earth Taken from private land
d&e) Overheads & Contractors Profit
Cost for 50 cum = a+b+c+d+e
Rate per cum a+b+c+d+e/50
Note : Only 75% of fresh material has been provided as 25% can be
retrieved from site from earth i.e. flown down the slop in the form of
slurry and deposited at the foot of rain cuts.
Maintenance of Earthen shoulder (filling with fresh
selected soil)
(I) Making up loss of material/irregularities on shoulders to the
design level by adding fresh approved selected soil and
compacting it with appropriate equipment at OMC upto a
lead of 1000 m as per technical specification Clause 1903
MORD / 3003 MORTH
Unit = sqm
Taking output = 100 sqm
Assuming average thickness of filling to be 150 mm
Quality of fresh material = 15 cum
(a) Labour
day
Mate
day
Mazdoor (Unskilled)

6.240
3.000
7.500

10.400
0.830
0.650
2.270
15.000
37.500

4.680

621

RBR-MTRD
Index-code

S. No

Description

Unit

Quantity

Rate
Rs.

hour

0.250

hour
hour

0.680
4.000

cum

15.000

day
day

2.600

hour

4.000

(b) Machinery
Hydraulic Excavator 0.9 cum / 1.00 cum bucket capacity @
60 cum/h
Tipper 5.5 cum
Plate compactor @ 25 sqm per hour
(c) Materials
Compensation of earth
d&e) Overheads & Contractors Profit
Cost for 100 sqm = a+b+c+d+e
Rate per sqm = (a+b+c+d+e)/100
(II) Maintenance of Earthen shoulder (stripping of excess
soil)
Stripping excess soil from the shoulder surface to achieve
the approved level and compacting with plate compactor at
OMC as per drawings and Technical Specification Clause
1903 MORD / 3003 MORTH
Unit = sqm
Taking output = 100 sqm
Assuming height of stripping as 75 mm
Quantity of earth cutting involved = 7.5 cum
(a) Labour
Mate
Mazdoor (Unskilled)
(b) Machinery
Plate compactor @ 25 sqm per hour
c&d) Overheads & Contractors Profit
Cost for 100 sqm = a+b+c+d
Rate per sqm = a+b+c+d/100

RBR-MTRD-3

Amount
Rs.

Remarks

Note : Earth stripped from earthen shoulders to be used as

shoulders or dumped on the side slopes locally for disposal.
Maintenance of bituminous surface road
(i) Repair to pot holes by removal of failed material, trimming the
sides to vertical and leveling the bottom, cleaning the same with
compressed air or any appropriate method filled with 75mm B.M,
applying bitumen emulsion prime coat at the bottom and
bitumen emulsion tack coat on sides and on bottom as per
technical specifications Clauses 502 and 503 and 1904 MORD.

Unit = cum
Taking output = 187.5x0.075 = 14.06 cum = (30.94 Tonne)
(5% area of one km)
(a) Labour
day
Mate
day
Mazdoor (Unskilled)
(b) Machinery
hour
Jack hammer 25 kg with tractor
hour
Compressor 210 cfm with tractor
hour
Emulsion pressure distributor
hour
Mixall 6/10 t capacity
hour
Three wheeled 80-100 kN Static Roller
(c) Materials
Primer with bitumen emulsion @ 9 kg/10 sqm 187.5x9 = Tonne
168.75 kg.
Tack coat with bitumen emulsion @ 3.0 kg/ 10 sqm
Bottom = 187.5
Tonne
Sides = 28.27
Total = 215.77
Bitumen for BM @ 3.5% by weight of mix = 30.94 x 3.5 / 100 = 1.082

Weight of mix (BM) 14.06 cum = (30.94 tonne)

Weight of Bitumen = 1.082
Weight of aggregate 30.94 -1.082 = 29.86
Taking density of aggregate 1.5 t per cum
Volume of aggregate 29.86 / 1.5 = 19.90 cum
Grading (1) (40 mm nominal size)
37.5 - 25 mm 15%
25 - 10 mm 45%
10 - 5 mm 25%
5 mm and below 15%
d&e) Overheads & Contractors Profit
Cost of 14.06 cum = a+b+c+d+e
Rate per cum = a+b+c+d+e/14.06

20.800
4.000
2.000
4.000
4.000
4.000
0.168

0.064

Tonne

1.082

cum
cum
cum
cum

2.985
8.955
4.975
2.985

(ii) Patch repair on already filled pot holes with 75 mm BM

with 20 mm premix carpet and seal coat Type B as per

drawings and technical specification Clause 1904.2
MORD
Unit = sqm

622

RBR-MTRD
Index-code

S. No

Description

Unit

Quantity

Rate
Rs.

day
day

16.640

hour
hour
hour

2.000
2.000
4.000

tonne

0.292

tonne

0.040

tonne

0.136

cum

5.400

cum

1.200

day
day

20.800

hour
hour
hour
hour

2.000
2.000
2.000
4.000

0.064
0.292

Taking output = 200 sqm

(a) Labour
Mate
Mazdoor (Unskilled)
(b) Machinery
Mixall 6/10 tonne
Bitumen pressure distributor
Three wheeled 80-100 kN Static Roller
(c) Materials
Bitumen for pre-mix carpet @ 14.60 kg/10 sqm 200x14.60/10
=292 kg
Bitumen for tack coat @2kg per 10sqm 200 x 2 / 10 =40kg
Bitumen for seal coat @ 6.8 kg per 10 sqm
Crushed stone aggregate 13.2 mm to 5.6 mm @ 0.27 cum
per 10 sqm= 200x0.27/10=5.4cum
Crushed sand passing 2.36 mm sieve and retained on 180
micron sieve @ 0.06 cum per 10 sqm
200 x 0.06 / 10 = 1.20 cum
d&e) Overheads & Contractors Profit
Cost of 200 sqm = a+b+c+d+e
Rate/sqm = a+b+c+d+e/200
(iii) Repair to pot holes and removal of loose material,
trimming of sides, cleaning of surface by providing tack
coat, 20 mm thick pre-mix carpet and seal coat type B
specification Clause 1904.2 MORD
Unit = sqm
Taking output = 200 sqm
(a) Labour
Mate
Mazdoor (Unskilled)
(b) Machinery
Air compressor 210 cfm with tractor
Bitumen pressure distributor
Mixall 6/10t capacity
Three wheeled 80-100 kN Static Roller
(c) Materials
Bitumen for tack coat @ 3kg per 10 sqm 200 x 3 / 10 = 60 kg

t
Bitumen for pre-mix carpet @ 14.60 kg per 10 sqm = 200 x
14.6 / 10 = 292 kg
t
Bitumen for seal coat @ 6.8 kg per 10 sqm
= 200 x 6.8 / 10 = 136 kg
Crushed stone aggregate 13.2 mm to 5.6 mm @ 0.27 cum cum
per 10 sqm= 200x0.27/10=5.4cum
Crushed sand passing 2.36 mm sieve and retained on 180 cum
micron sieve @ 0.06 cum per 10 sqm
200 x 0.06 / 10 = 1.20 cum
d&e) Overheads & Contractors Profit
Cost for 200 sqm = a+b+c+d+e
Rate per sqm = a+b+c+d+e/200

Amount
Rs.

Remarks

0.136
5.400
1.200

(iv) Repair to pot holes and removal of loose material, trimming

of sides, cleaning of surface by providing tack coat with

bitumen emulsion, 20 mm thick pre-mix carpet using cationic
bitumen emulsion and seal coat type B with bitumen
emulsion as per Technical Specification Clauses 1904.2, 503
and 508.2 MORD
Unit = sqm
Taking output = 200 sqm
(a) Labour
Mate
Mazdoor (Unskilled)
(b) Machinery
Concrete mixer 0.4 / 0.28 cum capacity
Air compressor 210 CFM with tractor
Emulsion pressure distributor
Three wheeled 80-100 kN Static Roller
(c) Materials
Emulsion for tack coat @ 3 kg per 10 sqm
200 x 3 / 10 = 60 kg
Emulsion for premix carpet @ 21.50 kg per 10 sqm
200 x 21.50 / 10 = 430 kg
Emulsion for seal coat @ 10 kg per 10 sqm
= 200 x 10 / 10 = 200 kg
Crushed stone aggregate 13.2 mm to 5.6 mm @ 0.27 cum
per 10 sqm= 200x0.27/10=5.4cum

day
day

16.640

hour
hour
hour
hour

2.500
2.000
2.000
4.000

tonne

0.060

tonn

0.430

tonn

0.200

cum

5.400

623

RBR-MTRD
Index-code

S. No
1

Description

Unit

Quantity

4
1.200

Crushed sand passing 2.36 mm sieve and retained on 180 cum

micron sieve @ 0.06 cum per 10 sqm = 200 x 0.06 / 10 =
1.20
d&e) Overheads & Contractors Profit
Cost for 200 sqm = a+b+c+d+e
Rate per sqm = a+b+c+d+e/200
RBR-MTRD-4

RBR-MTRD-5

Rate
Rs.

Amount
Rs.

Remarks

Filling Pot-holes and Patch Repairs with open-Graded

Premix surfacing, 20mm.
Removal of all failed material, trimming of completed
excavation to provide firm vertical faces, cleaning of surface,
painting of tack coat on the sides and base of excavation as
per clause 503, back filling the pot holes with hot bituminous
material as per clause 511, compacting, trimming and
finishing the surface to form a smooth continuous surface, all
as per clause 3004.2 MORTH
Unit = Sqm
Taking out put = 10250 sqm (205 cum)(405 tonne)
a) Labour
Mate
Mazdoor (Unskilled)
Mazdoor skilled
b)
Machinery
Air compressor 250 cfm
HMP 100-110 TPH Capacity
Tipper 10 tonnes capacity
Smooth wheeled roller 8-10 tonnes
c)
Material
Crushed stone aggregates nominal size 13.2mm
Crushed stone aggregates nominal size 11.2mm
Bitumen 80/100
Bitumen emulsion for tack coat including vertical sides of pot
hole.
d&e) Overheads & Contractors Profit
Cost for 10250 sqm = a+b+c+d+e
Rate per sqm = (a+b+c+d+e)/10250
Filling Pot-holes and Patch Repairs with Bituminous
concrete, 40mm.

Day
Day
Day

90.000
7.760

hour
hour
hour
hour

6.000
6.000
45.000
12.000

cum
cum
tonne

184.500
92.250
14.970

tonne

2.460

Day
Day
Day

70.000
5.920

hour
hour
hour
hour

6.000
6.000
45.000
12.000

tonne

22.500

tonne

1.180

cum
cum
cum

99.750
65.550
114.000

cum
cum
cum
tonne

85.500
71.250
122.550
9.000

Removal of all failed material, trimming of completed excavation to

provide firm vertical faces, cleaning of surface, painting of tack coat
on the sides and base of excavation as per clause 503, back filling
the pot holes with hot bituminous material as per clause 504,
compacting, trimming and finishing the surface to form a smooth
continuous surface, all as per clause 3004.2 MORTH

Unit = Sqm
Taking out put = 4900 sqm (196 cum)(450 Tonnes)
a) Labour
Mate
Mazdoor (Unskilled)
Mazdoor skilled
b)
Machinery
Air compressor 250 cfm
HMP 100-110 TPH Capacity
Tipper 10 tonnes capacity
Smooth wheeled roller 8-10 tonnes
c)
Material
I) Bitumen
ii) Bitumen emulsion for tack coat .
iii) Aggregates
Grading I - 19mm(Nominal size)
20-10mm 35 per cent
10-5 mm 23 per cent
5mm and below40 per cent
Add 5 per cent for wastage
or
Grading-II 13mm (Nominal size)
13.2-10 mm 30 per cent
10-5 mm 25 per cent
5 mm and Below43 per cent
Filler 2 per cent (Cement)
Add 5 per cent for wastage
Any one of the above alternatives of aggregate i.e. 19mm or 13mm
nominal size may be adopted as per approved design.
(i)

for grading I Material

d&e) Overheads & Contractors Profit
Cost for 4900 sqm = a+b+c+d+e

624

RBR-MTRD
Index-code

S. No

Description

Unit

Quantity

Rate
Rs.

Amount
Rs.

Remarks

Rate per sqm = (a+b+c+d+e)/4900

(ii) for grading II Material
d&e) Overheads & Contractors Profit
Cost for 4900 sqm = a+b+c+d+e
Rate per sqm = (a+b+c+d+e)/4900

RBR-MTRD-6

RBR-MTRD-7

RBR-MTRD-8

Note : For detailed working of quantities of aggregates, refer item

5.8 of chapter 5
Crack Filling
Filling of crack using slow - curing bitumen emulsion and
applying crusher dust in case cracks are wider than 3mm as
per Tech. specification 3004.3.3 MORTH
Unit = Running Meter
Taking out put = 500m
a) Labour
day
Mate
day
Mazdoor (Unskilled)
b)
Material
Kg
Slow-curing bitumen emulsion
cum
Stone crusher dust
c&d) Overheads & Contractors Profit
Cost for 500sqm = a+b+c+d
Rate per meter = (a+b+c+d+e)/500
Dusting

A
B

(C)

(D)

Applying crusher dust to areas of road where bleeding of

excess bitumen has occurred as per Tech. specification
3004.4 MORTH.
Unit = Sqm
Taking output = 3500 sqm
a) Labour
Mate
Mazdoor (Unskilled)
b)
Material
Stone crusher dust finer than 3mm with not more than 10
per cent passing 0.075 sieve.
c&d) Overheads & Contractors Profit
Cost for 3500sqm = a+b+c+d
Rate per meter = (a+b+c+d)/3500
Fog Seal as per Specification 3004.3.2 MORTH
Data as in Chapter 5
Crack Prevention courses as per Specification 3004.3.4
MORTH
(i) Stress Absorbing Membrane (SAM) crack width less than
6 mm
(ii) Stress Absorbing Membrane (SAM) with crack width 6
mm to 9 mm
(iii) Stress Absorbing Membrane (SAM) crack width above 9
mm and cracked area above 50 per cent
(iv) Bitumen Impregnated Geotextile
Data as in Chapter 5
Slurry Seal
(i) 5 mm thickness
(ii) 3 mm thickness
(iii) 1.5 mm thickness
Data as in Chapter 5
Surface Dressing for maintenance works.
(i) 19 mm nominal chipping size
(ii) 13 mm nominal size chipping
Data as in Chapter 5

RBR-MTRD-9

1.040
33.000
0.020

day
day

2.080

cum

6.250

sqm

sqm
sqm
sqm
sqm

sqm
sqm
sqm

sqm
sqm

Repair of Joint Grooves with Epoxy Mortar

Repair of spalled joint grooves of contraction joints,
longitudinal joints and expansion joints in concrete
pavements using epoxy mortar or epoxy concrete as per
Tech. specification 3005.1 MORTH
Unit = running metre
Taking output = 10 metres
a) Labour
day
Mate
day
Mazdoor (Unskilled)
day
Chiseller
b)
Material
kg
Epoxy primer
Epoxy compound with accessories for preparing epoxy kg
mortar
c)
Machinery
hour
Air compressor 250 cfm for cleaning

0.540
0.500
2.500
10.000

0.050

625

RBR-MTRD
Index-code

S. No
1

Description

Unit

Quantity

Rate
Rs.

Amount
Rs.

Remarks

d&e) Overheads & Contractors Profit

Cost for 10 metres = a+b+c+d+e
Rate per metre = (a+b+c+d+e)/10
RBR-MTRD-10

RBR-MTRD-11

10

11

Repair of old Joints Sealant

Removal of existing sealant and re sealing of contraction,
longitudinal or expansion joints in concrete pavement with
fresh sealant material as per Tech. specification 3005.2
MORTH
Unit = running metre
Taking output = 10 metres
a) Labour
day
Mate
day
Mazdoor (Unskilled)
b)
Material
kg
Primer
kg
Sealant
c)
Machinery
hour
Air compressor 250 cfm for cleaning
d&e) Overheads & Contractors Profit
Cost for 10 metres = a+b+c+d+e
Rate per metre = (a+b+c+d+e)/10
Hill Side Drain Clearance as per Specification 3000
MORTH
Removal of earth from the choked hill side drain and
disposing it on the valley side manually
Unit = running metre
Taking output = 10 metres
Assuming muck causing choking of drain to be 0.2 cum per
metre, quantity of earth to be removed for 10 metres = 2 cum
a) Labour
Mate
Mazdoor (Unskilled)
b&c) Overheads & Contractors Profit
Cost for 10 metres = a+b+c
Rate per metre = (a+b+c)/10

RBR-MTRD-12

12

0.540
0.250
1.000
0.050

day
day

1.080

day
day

1.040

hour

1.670

Land Slide Clearance in soil

Clearance of land slides in soil and ordinary rock by a bulldozer D 80 A-12, 180 HP and disposal of the same on the
valley side as per Tech. specification 3000 MORTH
Unit = cum
Taking output = 100 cum
a) Labour
Mate
Mazdoor (Unskilled)
b)
Machinery
Dozer 180 HP @ 60 cum per hour
c&d) Overheads & Contractors Profit
Cost for 100 cum = a+b+c+d
Rate per cum = (a+b+c+d)/100

Note : Land Slide clearance involves pushing of loose earth slided on the road surface from hill face on the
valley side. Since no cutting of original ground is involved, the output of dozer has been taken as 60 cum
per hour for soil, ordinary rock and blasted hard rock. However, if there are objection to disposing of earth
on valley side, additional resources for its disposal shall be considered as per site conditions.

RBR-MTRD-13

13

Landslide Clearance in Hard Rock Requiring Blasting

Clearing of land slide in hard rock requiring blasting for 50
per cent of the boulders and disposal of the same on the
valley side as per Tech. specification 3000 MORTH.
Unit = cum
Taking output = 100 cum
a) Labour
Mate
Mazdoor (Unskilled)
Driller

day
day
day

1.590
0.750

626

RBR-MTRD
Index-code

S. No
1

RBR-MTRD-14

RBR-MTRD-15

14

15

Description

Unit

Quantity

4
0.070

day
Blaster
b)
Machinery
hour
Dozer D 80 A-12,180 HP @ 60 cum per hour
hour
Air compressor 250 cfm with two jack hammer
c)
Materials
kg
Gelatine 80 per cent @ 35 kg per 100 cum
Electric Detonators @ 1 Detonator for 2 Gelatine sticks of each
125 gms each
c&d) Overheads & Contractors Profit
Cost for 100 cum = a+b+c+d+e
Rate per cum = (a+b+c+d+e)/100
Note : Credit for the rock if found acceptable as construction
material shall be afforded
Maintenance of Gravel Road
Maintenance of gravel road including making up the loss of
profile, rectifying corrugated surface, filling up of
depressions, pot holes and erosion gullies by adding fresh
material and compacting it with appropriate equipment or to
strip excess of material from the road surface as per
drawings and technical specification Clause 1905 MORD

For grading I Material compacting with Smooth Wheel

Roller 80-100 kN
Unit = sqm
Taking out put @ 5% of the area in one km. as affected:
= 1000 x 3.75x0.05 / 100 = 187.5 Sqm
Quantity = 187.5 x 0.15 = 28.12 cum
cum
a) Rate as per item 4.1 of Chapter 4
b) Add 50% for extra efforts involved as maintenance is to be
done in small reaches
Cost of 187.5 Sqm = a+b
Rate per sqm = a+b/187.5
Note : The cost of 25% retrieved material may be deducted from
rates.
Maintenance of WBM Road

Rate
Rs.

Amount
Rs.

Remarks

1.670
2.500
17.500
70.000

28.120
50%

Maintenance of WBM road including filling up of pot holes,

ruts and rectifying corrugated surface, damaged edges and
raveling as per technical specification Clause 1906 MORD.

RBR-MTRD-16

16

For grading III Material compacting with Smooth Wheel

Roller 80-100 kN
Unit = Sqm
Output - Taking affected area @ 5% in 1 km
Quantity 187.5 x 0.075 = 14.06 cum
cum
14.060
a) Rate as per item 4.7(3) of Chapter 4
50%
b) Add 50% for extra efforts involved as maintenance is to be
done in small reaches
Cost of 187.5 Sqm = a+b
Rate of per sqm a+b/187.5
Note : The cost of 25% retrieved material may be deducted from rates.
Maintenance of Drains
The maintenance of drains include erosion, repair, clearing,
cleaning, reshaping, regarding, deepening of side drains as
well as catch water drains as per technical specification
Clause 1907 MORD.
Unit - Per Metre
Taking output one km = 1000 metre
a) Labour
day
Mate
day
8.320
Mazdoor (Unskilled)
b&c) Overheads & Contractors Profit
Cost for 1000 metre = a+b+c
Rate per Metre = a+b+c/1000

627

RBR-MTRD
Index-code

S. No

Description

Unit

Quantity

Rate
Rs.

day
day
day

1.100
1.400

L.S

LS

day
day
day

4.200
1.000

L.S

LS

day
day
day

2.400
4.000

LS

LS

day
day
day

2.090
0.125

LS

LS

RBR-MTRD-17

17

Amount
Rs.

Remarks

Maintenance of Culverts
(I) Maintenance of Hume pipe Culvert by way of Clearing, Cleaning,
Erosion repair, repairs to cracks, parapet wall and protection work as
per drawing and technical specification Clause 1908 MORD.

Unit = One No. Hume pipe (1000 mm dia)

Taking output = One No.H.P. Culvert
a) Labour
Mate
Mazdoor (Unskilled)
Mason 2nd Class
b)
Material
Cement, Sand, Brick, Boulder etc.
c&d) Overheads & Contractors Profit
Cost for one No. Hume pipe culvert = a+b+c+d
Rate per hume pipe Culvert = a+b+c+d
(II) Maintenance of Culverts Slab type
Maintenance of Slab type Culverts by way of clearing, Cleaning,
Erosion repair, repairs to cracks, parapet walls and Protection works
as per drawing and technical specification Clause 1908 MORD

RBR-MTRD-18

18

Unit = One No. Culvert (2 m span)

Taking output = one No. Slab Culvert
a) Labour
Mate
Mazdoor (Unskilled)
Mason 2nd Class
b)
Material
Cement, Sand, Brick, Boulder etc.
c&d) Overheads & Contractors Profit
Cost for One Slab Culverts =a+b+c+d
Rate per Culvert = a+b+c+d
Maintenance of Causeway
Maintenance of Causeway by way of minor Surface repairs, replacing
Guide Posts, repair of flood gauges, removal of debris, providing
boulders and protection work and painting as per technical
specification Clause 1909 MORD

RBR-MTRD-19

19

Unit = One metre

Taking output = 50 metre causeway
a) Labour
Mate
Mazdoor (Unskilled)
Mason 1st Class/Painter 1st Class
b)
Material
Supply of cement, paint, sand, aggregate, boulder etc.
(LS Rs.350.00)
c&d) Overheads & Contractors Profit
Cost for 50 metre = a+b+c+d
Rate per metre = a+b+c+d/50
Maintenance of Road Signs
Maintenance of road signs by way of cleaning and repainting of
mandatory / regulatory / cautionary / informatory and place
identifications sign board as per drawings and technical specification
Clause 1910 MORD

Unit = 1 km
All types of signs in one Km
a) Labour
Mate
Mazdoor (Unskilled)
Painter 1st Class
b) Material
Synthetic Enamel Paint, Engineering grade tape, welding
machine etc. (LS Rs.300)
c&d) Overheads & Contractors Profit
Cost for one Km = a+b+c+d
Rate per km = a+b+c+d

628

RBR-MTRD
Index-code
RBR-MTRD-20

RBR-MTRD-21

S. No

Description

Unit

Quantity

Rate
Rs.

20

Maintenance of steel and RCC Railing

i Repair of steel railing to bring it to original shape cleaning
and repainting as per drawing and technical specification
Clause 1911MORD
Steel Railing
Unit = Running metre
Taking output = 10 metre
It is assumed that damage is to the extent of 10%
a) Labour
day
Mate
day
Mazdoor (Unskilled)
day
Painter 1st Class
day
Blacksmith
b)
Material
t
Mild steel (structural steel)
ISMC = 0.029T
MS plate = 0.01
t
Nuts and bolts
c) Machinery
LS
Welding set (LS Rs.100.00)
d&e) Overheads & Contractors Profit
Cost for 10 metre = a+b+c+d+e
Rate per metre = a+b+c+d+e/10
ii Repair of RCC railing to bring it to the original shape,
cleaning and repainting as per drawings and technical
specification Clause 1911 MORD
RCC Railing
Unit = running metre
Taking output = 1 metre
It is assumed that damage is to the extent of 10%
a) Labour
day
Mate
day
Mazdoor (Unskilled)
day
Mason 1st Class
b)
Material
M 30 grade cement concrete
cum
Rate as per item no. 13.1 (III) of Chapter 13
Steel bars reinforcement
t
Rate as per item no.13.2 of Chapter 13
c&d) Overheads & Contractors Profit
Rate per metre = a+b+c+d+e

21

Amount
Rs.

Remarks

0.324
0.100
0.200
0.039

0.001
LS

0.212
0.100

0.100
0.013

Maintenance of 200 metre and km stones

Maintenance of 200 metre and km stone by way of refitting of tilted
stones repairing with cement mortar, cleaning, repairing and lettering
on 200 metre km stone and 5th km stone as per drawing and
technical specification Clause 1912 MORD

Unit = 1 km
Assuming 1 km stone, 4 nos 200 metre stone and 1/5th 5km
stone
Painting two coats with synthetic enamel paint
200 m stone 4 nos = 0.760 sqm.
One km stone = 0.815 sqm.
5th km stone 1x1/5 = 0.320 sqm.
Total = 1.895 sqm.
sqm
As per item No. 10.5 of chapter 10

1.895

ii Printing letters and figures of any shade with synthetic enamel

paint of any approved colour to give an even shade

200 m stone 4 Nos. = 40 per cm height per letter

One no km stone = 120 per cm height per letter
5th km stones 1/5th = 60 per cm height per letter
Total = 220 per cm height per letter
Rate as per item no 10.1 of chapter 10

per cm

220.000

629

RBR-MTRD
Index-code

S. No
1

RBR-MTRD-22

Description

Unit

Quantity

Rate
Rs.

day
day
day

0.524
0.100

LS

LS

day
day
day

1.120
2.000

day
day

2.080

day
day

10.400

day
day
day

0.153
0.143

quintal
kg
kg

0.045
0.100
0.013

a) Labour
Mate
Mazdoor (Unskilled)
Mason 1st Class
b)
Material
Cement, sand, aggregates etc.
(LS = Rs.100.00)
c&d) Overheads & Contractors Profit
Rate per/km = (i+ii+a+b+c+d)
Cutting of branches of trees shrubs and trimming of
grass and weeds

22
i

23

Remarks

Cutting of branches of trees and shrubs from the road way or

with in R.O.W including disposal of wood and leaves to suitable
location as per technical specification Clause 1914 MORD

Unit = one tree

Taking output = 10 trees of 900 mm average girth
a) Labour
Mate
Mazdoor (Skilled)
Mazdoor (Unskilled)
b&c) Overheads & Contractors Profit
Cost for 10 trees = (a+b+c)
Rate per tree = (a+b+c)/10
ii Cutting of shrubs from the road way or with in R.O.W and
disposal of shrubs to suitable locations as per technical
specifications Clause 1914 MORD
Unit=Each
Taking output = 100 nos shrubs
a) Labour
Mate
Mazdoor (Unskilled)
b&c) Overheads & Contractors Profit
Cost for 100 shrubs = a+b+c
Rate per shrub = a+b+c/100
iii Trimming of grass and weeds from the shoulders/berms
and disposing off the same to suitable locations as per
technical specifications Clause 1914 MORD

RBR-MTRD-23

Amount
Rs.

Unit = sqm
Taking output = 1500 sqm
a) Labour
Mate
Mazdoor (Unskilled)
b&c) Overheads & Contractors Profit
Cost for 1500 sqm = a+b+c
Rate per sqm = a+b+c/1500
White washing of parapet walls of CD work and tree
truncks
White washing two coats on parapet walls and tree trunks including
preparation of surface by cleaning scraping etc. as per technical
specifications Clause 1915 MORD

RBR-MTRD-24

24

Unit = sqm
Taking output = 9 sqm
a) Labour
Mate
Mazdoor (Unskilled)
White washer
b)
Material
Lime
Fevicol adhesive
Indigo
c&d) Overheads & Contractors Profit
Cost for 9 sqm = a+b+c+d
Rate per sqm = a+b+c+d/9
Periodical Renewal to existing bituminous surface
I Open graded Premix carpet 20 mm thick
Unit = sqm
(i) Tack coat
With bituminous Emulsion (RS-1)
Rates as in Chapter 5

sqm

(ii) Pre-mix carpet using bituminous (penetration grade modified

bitumen) binder

Rates as in Chapter 5
as relevant
Or
(iii) Premix carpet using bitumen Emulsion
Rates as in Chapter 5

sqm

sqm

630

RBR-MTRD
Index-code

S. No

Description

Unit

Quantity

Rate
Rs.

(iv) Seal coat Type A, B or C

Rates as in Chapter 5
II Surface dressing single coat/first coat or 2nd coat
Rates as in Chapter 5

Amount
Rs.

Remarks

sqm

General Note :
The provisions towards Mate is included in the provision towards unskilled Mazdoor.

631