Scribd
Upload
42 views

Master Plan Review: Kemp Mill

The document summarizes the zoning code rewrite process and implementation for Kemp Mill, Maryland. It discusses that the existing zoning code was last updated in 1977 and a rewrite was undertaken to simplify zones, eliminate redundancy, and clarify standards. For Kemp Mill specifically, the 8 existing zones will be consolidated into 6 proposed zones, with some existing low-density residential zones being combined and the commercial zone being replaced with a neighborhood retail zone. Maps show the existing and proposed zoning designations for the Kemp Mill planning area.

Uploaded by

Planning Docs
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
42 views

Master Plan Review: Kemp Mill

The document summarizes the zoning code rewrite process and implementation for Kemp Mill, Maryland. It discusses that the existing zoning code was last updated in 1977 and a rewrite was undertaken to simplify zones, eliminate redundancy, and clarify standards. For Kemp Mill specifically, the 8 existing zones will be consolidated into 6 proposed zones, with some existing low-density residential zones being combined and the commercial zone being replaced with a neighborhood retail zone. Maps show the existing and proposed zoning designations for the Kemp Mill planning area.

Uploaded by

Planning Docs
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Master Plan Review

KEMP MILL
Approved and Adopted
December 2001

Kemp Mill

Page 1 of 10

Updated July 2014 based on Adopted DMA

BACKGROUND

ONING CODE REWRITE

In 2007, the Montgomery County Council directed the Planning Department to undertake a
comprehensive zoning ordinance rewrite. Last rewritten in 1977, the current 1,200 + page code is
viewed as antiquated and hard to use with standards that have failed to keep pace with modern
development practices.
With only about four percent of land in the County available for greenfield development, the new
zoning code can play a crucial role in guiding redevelopment to areas like surface parking lots and
strip shopping centers. An updated zoning code is important for achieving the kind of growth
Montgomery County policymakers and residents want.
Initial sections of the new code were drafted by Code
Studio, a zoning consultant. These drafts were
subsequently analyzed and edited by planners based
on feedback from the Zoning Advisory Panel (a citizen
panel appointed by the Planning Board to weigh in on
the projects direction), county agency representatives,
residents and other stakeholders. In September 2012,
planning staff began the release of a draft code in
sections accompanied by a report highlighting changes
from the current code. The staff drafts were reviewed
at length by the Planning Board.

Public Listening Session 9/2009

The Planning Board held worksessions and public hearings between September of 2012 and May of
2013. On May 2, they transmitted their draft to the County Council. The Council adopted the text of
the new code in March and adopted the new zoning map in July 2014.
The new code and map will go into effect on October 30, 2014.

ZONE IMPLEMENTATION PROCESS


An important aspect of the Zoning Rewrite process is the potential simplification of 123 existing
zones into about 30 proposed zones. While some of the proposed zones are a direct one-to-one
translation of existing zones, others are the result of combining existing zones with similar
standards. Additionally, existing zones that are not currently mapped or are no longer used in the
County have been eliminated from the proposed code. Through the implementation process,
Montgomery County aims to simplify the number of zones, eliminate redundancy, and clarify
development standards. A full translation table for all zones can be found in the documents section
of our website: www.zoningmontgomery.org.

Kemp Mill

Page 2 of 10

Updated July 2014 based on Adopted DMA

Agricultural, Residential, and Industrial Zone Implementation:


For agricultural and rural zones, the existing zones will be translated to proposed zones on a one-toone basis, with the exception of the Low Density Rural Cluster zone which is not currently used in
the County and will be eliminated.
Many of the existing residential zones will remain the same. Other residential zones will be
combined with existing zones that have similar development standards. The R-4Plex zone, which is
not currently mapped anywhere in the county, will be removed from the proposed code.
Implementation of Industrial zones will combine similar zones (Rural Service, I-1, and R+D) into the
proposed Industrial Moderate (IM) zone. The existing heavy industrial zone (I-2) will be renamed as
the Industrial Heavy (IH) zone.

Examples:

Agricultural
and Rural

Rural Density
Transfer (RDT)

Agricultural
Reserve (AR)

R-60
(detached residential)

Residential

R-60
(detached residential)

R-60/TDR
(detached residential)

Kemp Mill

Page 3 of 10

Updated July 2014 based on Adopted DMA

Commercial and Mixed-Use Zone Implementation:


Parcels located in the existing Commercial, Mixed-use, Central Business District (CBD), and Transit
Station zones will be translated into one of the proposed Commercial/Residential (CR) or
Employment (E) Zones using a two-tiered process.
First, decisions about specific parcels in these zones were based on recommendations within the
Master Plan. Planning staff reviewed each Master Plan in the County. When the Master Plan
provided specific recommendations about allowed density, height, or mix of uses for individual
commercial or mixed-use parcels, those recommendations were used to build the formula of the
proposed zone. This ensures consistency with currently allowed density and height, and helps
codify Master Plan recommendations in a parcel-specific manner.
Second, if the Master Plan did not make specific recommendations, the current zone changed to a
proposed zone on a one-to-one basis or the proposed zone was determined using a specific
standardized decision tree (see example below). The standardized decision tree translates existing
zones by considering each specific parcels proximity to single-family neighborhoods or other
factors. The goal of the implementation decision tree is to retain currently allowed heights and
densities and maintain context sensitivity.

Example: C-1 Convenience Commercial

Confronts or abuts
R-150 or less intense

then

NR-0.75
H-45

Within a Historic
District

then

NR-0.75
H-45

Confronts or abuts

then

CRT-0.75
C-0.75 R-0.25 H-35

then

CRT-0.75
C-0.75 R-0.25 H-45

or site is bigger than 5 acres

C-1

if
R-90, R-60, R-40, or R-MH

Confronts or abuts RT
or more intense

Kemp Mill

Page 4 of 10

Updated July 2014 based on Adopted DMA

KEMP MILL
PLAN HIGHLIGHTS
The Kemp Mill Master Plan was approved
and adopted in December 2001. The
recommendations in the Master Plan
reflect a Communities and Center
concept and promote the role of both the
neighborhoods and town center in Kemp
Mill. The Plan recommends maintaining
the existing development patterns in
Kemp Mill which includes mature
residential subdivisions, small cluster
subdivisions, medium and high-density
apartment complexes as well as
townhomes. The Master Plans land use
and zoning recommendations are meant to strengthen the
role of the town center to serve the Kemp Mill community.

Kemp Mill Urban Park

The Master Plan further recommends improving mobility of residents through a safe and
efficient transportation system, protecting Kemp Mills natural resources, and improving
resident access to community facilities through enhanced pedestrian and bicycle infrastructure.

Kemp Mill Shopping Center

Kemp Mill

Page 5 of 10

Updated July 2014 based on Adopted DMA

ZONE IMPLEMENTATION
The Kemp Mill Planning Area currently has 8 zones: 1 Commercial and 7 Residential.
Existing Residential:
RE-1: Detached Unit, Single-Family
R-150: Detached Unit, Single-Family
R-200: Detached Unit, Single-Family
R-60: Detached Unit, Single-Family
R-90: Detached Unit, Single-Family

RT-12.5: Townhouse, Single-Family


R-H: Multiple-Family, High-Rise Planned
Existing Commercial:
C-1: Convenience Commercial

The existing RE-1 will remain. The existing R-150 and R-200 will combine into R-200. The existing R-60
and R-90 will remain. The RT-12.5 will remain RT-12.5 (Townhouse) and the R-H will remain as well.
The existing C-1 zone is translated to the proposed zone NR (Neighborhood Retail) based on the location
and context for each of the parcels located in the C-1 zone. Each parcel was translated using the
standardized translation, with the overall goal to retain currently allowed heights and densities and
maintain context sensitivity.

Kemp Mill
Zone
RE-1

141.20

Percent

Zone
9.75 RE-1

Proposed
Acres

Percent

141.20

9.75

208.50

14.40

R-150

1.51

0.10

R-200

206.99

14.30

R-60

579.54

40.03 R-60

579.54

40.03

R-90

478.66

33.06 R-90

478.66

33.06

5.28

0.36

24.00

1.66

10.49

0.72

RT-12.5

5.28

R-H

24.00

C-1

10.49

Grand Total

Kemp Mill

Existing
Acres

R-200

0.36 RT-12.5
1.66 R-H
0.72 NR-0.75 H-45
1,447.67 Grand Total

Page 6 of 10

1,447.67

Updated July 2014 based on Adopted DMA

ZONE IMPLEMENTATION
Kemp Mill: Existing Zoning
Residential Estate

Residental Low Density

Residential Medium Density

Townhouse

Multi-Family

Commercial

Kemp Mill: Proposed Zoning


Residential Estate

Residental Low Density

Residential Medium Density

Townhouse

Multi-Family

Neighborhood Retail

Kemp Mill

Page 7 of 10

Updated July 2014 based on Adopted DMA

EXISTING ZONING MAP


Existing Zones
Residential
Estate
RE-1

Residential
Low Density
R-150
R-200

Residential
Medium Density
R-60
R-90

Townhouse
RT-12.5

Multi-Family
R-H

Commercial
C-1

Kemp Mill

Page 8 of 10

Updated July 2014 based on Adopted DMA

PROPOSED ZONING MAP


Proposed Zones
Residential
Estate
RE-1

Residential
Low Density
R-200

Residential
Medium Density
R-60
R-90

Townhouse
.

RT-12.5

Multi-Family
R-H

Neighborhood
Retail
NR

Kemp Mill

Page 9 of 10

Updated July 2014 based on Adopted DMA

PLANNING AREA CONTEXT

Kemp Mill

Page 10 of 10

Updated July 2014 based on Adopted DMA

You might also like